inspection with material specification-qm

8/13/2019 Inspection With Material Specification-QM

http://slidepdf.com/reader/full/inspection-with-material-specification-qm 1/8

LINK FOR ALL QM DATA:

http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/350a19448c11d189420000e829fbbd/frameset.htm

http://scn.sap.com/thread/744649

The link between master inspection characteristics and class characteristics enables the automatictransfer of inspection results to the batch classification, provided that you inspect with a materialspecification or task list. The class characteristics from the batch class are automatically valuated atinspection completion, on the basis of the inspection results.

Prerequisites

When you change a master inspection characteristic, if you want to create a link to a classcharacteristic with the format "NUM":

o The master inspection characteristic must be quantitativeo The unit of measurement for the master inspection characteristic must match that for the

class characteristic.o In the master inspection characteristic, the control indicators for the upper or lower

specification limit (or both) must be set.o The interval limits of the class characteristic must be entered to correspond with the

control indicators for the specification limit of the master inspection characteristic:








Specification Limits of the Master InspectionCharacteristic Interval Limits of the Class Characteristic

Lower specification limit only Lower limit, no upper limit Upper specification limit only Upper limit, no lower limit Both specification limits Both upper and lower limit

When you change a master inspection characteristic, if you want to create a link to a classcharacteristic with the format "CHAR":

o The master inspection characteristic must be qualitative.o In the master inspection characteristic, the control indicator for characteristic attributes

must be set.o A selected set of catalog type 1 must be assigned to the class characteristic.

Features

You can only have a 1:1 relationship between a class characteristic and a master inspectioncharacteristic (that is, you cannot reference the same class characteristic in several masterinspection characteristics).

If you create a link from an existing master inspection characteristic to a class characteristic withthe format "NUM", the system automatically makes the following changes:

o The Quantitative charac. indicator is set.o The master inspection characteristic is marked as a reference characteristic.o For the results confirmation, the Summarized recording indicator is set. If the control

indicator was previously set for Classed recording, all relevant data (for example, class

width) is initialized.o The control indicator Check target value is canceled.o The Confirm values indicator is set (class characteristics with the format "NUM" can only

be valuated using numerical values).o If the Entry required indicator is set in the class characteristic, the master inspection

characteristic is a required characteristic, otherwise, it is an optional characteristic.

When you maintain general characteristics in the Classification system, you must set theInterval vals allowed indicator, so that an interval can be entered in the configuration. Ifyou valuate a class characteristic in the configuration over several intervals (for example,

intervals 1-2m and 5-6m for the characteristic "length", the system copies either one ofthese intervals, when the inspection lot is created. To avoid this scenario, you should notvaluate a characteristic with several intervals.

o The number of decimal places is taken from the class characteristic as a proposed value.o All pairs of limits (except the tolerance limits) are initialized.o Default values for the upper and lower specification limit are taken from the interval limits

of the class characteristic. (For an inspection with a material specification, the valuesentered in the class characteristic are used if the master inspection characteristic in the



material specification is linked to the class characteristic). However, for an inspection witha task list, the values specified in the task list for this master inspection characteristic arerelevant.

o The short texts are taken from the class characteristics and proposed as default texts.o In addition to the short text, the search field is also taken from the class characteristic and

proposed in the logon language as the default.

If you create a link from an existing master inspection characteristic to a class characteristic withthe format "CHAR", the system automatically makes the following changes:

o The Qualitative charac. indicator is set.o You must completely maintain master inspection characteristics that are linked to a class

characteristic (master inspection characteristic is marked as Reference characteristic orComplete copy model ).

o If you make this link to use the batch classification, you must set the Summ. recordingcontrol indicator, so that classification can take place.

o The control indicator Charac. attribute can no longer be changed.o The selected set from catalog type 1 that is defined in the class characteristic is assigned

to the master inspection characteristic.o If method-dependent selected sets from catalog type 1 are assigned to the master

inspection characteristic, they are canceled.o If the Entry required indicator is set in the class characteristic, the master inspection

characteristic is a required characteristic, otherwise, it is an optional characteristic.o The short text is taken from the class characteristic and proposed as the default text.

o In addition to the short text, the search field is also taken from the class characteristic andproposed in the logon language as the default.

1.Create MIC's in QS21

2.Create Material specification in QS61 ,assign MIC's in Material specs.

3.In Material Master active QM view -->inspection type-->material specs

You can use material specs along with Task list a well.

4.Create Inspection lot & Material specs will get asssign to the Inspection lot as a Inspection plan.

5.Do RR, & take UD.

o 1.Create MIC using QS21



2.Create material specs in QS61 & use MIC in material specs.

3. Activate material specs in QM view along with check char & auto assignment.(do not active inspec with task list)

4.Now create inspection lot & check the status as REL.

Now do RR & take the UD

Check the Customizing table for inspection type 08(error while qm view assigning)

Hi Team,

I am trying to customize inspection type 08 for material specification only & NO task list. We are using only materialspecification, hence need to maintain it in inspection type customization.

However I am asked to do " For this reason, a control key must be maintained in Customizing for the

inspection type."

Pls suggest me where to maintain this.

ANS:

Hi

However I am asked to do " For this reason, a control key must be maintained in Customizing for the

inspection type."

As per my knowledge there is no such a customization need.

only thing you need to maintain is default values of inspection type

Qcc3>Q inspection>Maintain inspection setup default values.

In Inspection 08 maintain Material specification tick & remove tick of Inspection with task list.

Regards

Sujit







Qcc3:



The system does not allows you to deselect the Inspectionby task list until you will do the below.



Mmo1: Create material by below qm view.

Qs61

Upload initial stock, extend storage location and transfer the some qty to that storage location.

The inspection lot will goes to creat.

inspection with material specification-qm

Documents