install guide - samsung display solutions...in a wet basement, or near a swimming pool, etc.). if...

HG43AJ690U HG49AJ690U HG55AJ690UHG65AJ690U HG75AJ690U

Thank you for purchasing this Samsung product.To receive more complete service, please register your product at www.samsung.comModel Serial No.

INSTALL GUIDE

English

Before Reading This Install GuideThis TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls.

Figures and illustrations in this Install Guide are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.

Operational ModesThis TV has two modes: Interactive and Standalone mode.

• Interactive mode: In this mode, the TV communicates with and is fully or partially controlled by a connected Set Back Box (SBB) or Set Top Box (STB) provided by a hospitality System Integration (SI) vendor. When the TV is initially plugged in, it sends a command that attempts to identify the SSB or STB connected to it. If the TV identifies the SBB or STB and the SBB or STB identifies the TV, the TV gives full control to the SBB or STB.

• Standalone mode: In this mode, the TV works alone without an external SBB or the STB.The TV has a Hotel Option menu that lets you easily set its various hospitality functions. Please see page 27.The menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal hospitality configuration.

Still image warningAvoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 format images, stock or news bars or crawls) on the screen. Displaying still pictures continually can cause uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations below:

• Avoid displaying the same TV channel for long periods. • Always try to display a full screen image. • Reduce brightness and contrast to help prevent the occurrence of after-images. • Use all TV features designed to reduce image retention and screen burn-in.

English - 2

Warning! Important Safety InstructionsPlease read the Safety Instructions before using your TV.

CAUTION Class II product: This symbol indicates that a safety connection to electrical earth (ground) is not required.RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

AC voltage: Rated voltage marked with this symbol is AC voltage.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

DC voltage: Rated voltage marked with this symbol is DC voltage.

This symbol indicates that this product has included important literature concerning operation and maintenance.

Caution. Consult instructions for use: This symbol instructs the user to consult the install guide for further safety related information.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus and to protect it from overheating, these slots and openings must never be blocked or covered.

– Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

– Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight. – Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorised dealer immediately.

• This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric shock.

• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and at the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

English - 3

• Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock. • To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this

apparatus. • Be sure to plug in the power cord until it is firmly seated. When unplugging the power cord from a wall outlet,

always pull on the power cord's plug. Never unplug it by pulling on the power cord. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorised dealer or service centre.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

– Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by causing the insulation to deteriorate.

• Be sure to contact an authorised Samsung service centre for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.

• Use only a properly grounded plug and wall outlet. – An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn off this apparatus completely, disconnect it from the wall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure that the wall outlet and power plug are readily accessible.

• Store the accessories (batteries, etc.) in a location safely out of the reach of children. • Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a Samsung

service centre. • To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth.

Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, aerial fresheners, lubricants, or detergents. These chemicals can damage the appearance of the TV or erase the printing on the product.

• Do not expose this apparatus to dripping or splashing. • Do not dispose of batteries in a fire. • Do not short-circuit, disassemble, or overheat the batteries. • There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery.

Replace only with the same or equivalent type. • WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. • Use care when touching the TV after it has been on for some time. Some parts can be warm to the

touch.

English - 4

ContentsBefore Reading This Install Guide ---------------------------------------------------------------------------- 2Warning! Important Safety Instructions ---------------------------------------------------------------------------- 3

01 What's in the Box?

02 TV InstallationAssembling the swivel (43″-65″) ---------------------------------------------------------------------------- 8Installing the LED TV Stand ---------------------------------------------------------------------------- 9Installing the wall mount kit ---------------------------------------------------------------------------- 12Securing the TV to the Wall ---------------------------------------------------------------------------- 12Wall Mount Kit Specifications (VESA) ---------------------------------------------------------------------------- 13Providing proper ventilation for your TV ---------------------------------------------------------------------------- 14

03 The Remote ControlAbout the Buttons on the Remote Control ---------------------------------------------------------------------------- 15Installing batteries into the remote control ---------------------------------------------------------------------------- 16

04 Initial SetupUsing the TV Controller ---------------------------------------------------------------------------- 18

05 The Connection Panel

06 ConnectionsConnecting to your Internet network ---------------------------------------------------------------------------- 21Connecting the TV to an SBB or STB ---------------------------------------------------------------------------- 23Connecting the Bathroom Speakers ---------------------------------------------------------------------------- 24Connecting the RJP (Remote Jack Pack) ---------------------------------------------------------------------------- 25

07 Setting the Hotel Option MenusHotel Option menu items ---------------------------------------------------------------------------- 28Welcome Message ---------------------------------------------------------------------------- 38Hotel Logo ---------------------------------------------------------------------------- 38USB Cloning ---------------------------------------------------------------------------- 39Settings Cloned in the Hotel Menu ---------------------------------------------------------------------------- 41Setting Auto Initialise ---------------------------------------------------------------------------- 44Updating the TV’s Software ---------------------------------------------------------------------------- 47

English - 5

08 Using a Multi Code Remocon

09 Setting the SoundbarSamsung Soundbar (AirTrack) and Hospitality TVs in 2018 ---------------------------------------------------------------------------- 49

10 Editing ChannelsChannel Bank Editor (Smoovie TV Only) ---------------------------------------------------------------------------- 50Using Channel Editor ---------------------------------------------------------------------------- 51

11 Anti-theft Kensington Lock

12 Specifications and Other InformationSpecifications ---------------------------------------------------------------------------- 55Environmental Considerations ---------------------------------------------------------------------------- 56Decreasing power consumption ---------------------------------------------------------------------------- 56Supported Resolutions for UHD Input Signals ---------------------------------------------------------------------------- 57Display Resolution ---------------------------------------------------------------------------- 57Dimensions ---------------------------------------------------------------------------- 59Licences ---------------------------------------------------------------------------- 63

English - 6

01 What's in the Box?Make sure the following items are included with your TV. If any items are missing, contact your dealer.

Remote Control Batteries (AAA x 2) Power Cord

Data Cable (depending on the model) COMPONENT IN / AV IN AdapterWarranty Card / Quick Setup Guide /

Regulatory Guide (Not available in some locations)

Hotel Mount Kit (43″-65″) Cable Guide (43″-65″) Cable Guide (75″)

x 4

Wall Mount Adapter

• The items’ colours and shapes may vary depending on the models. • Cables not included can be purchased separately. • Check for any accessories hidden behind or in the packing materials when opening the box.

The screen can be damaged from direct pressure when handled incorrectly. As shown in the figure, make sure to grip the edges of the screen when you lift the TV.

Do Not Touch This Screen!

English - 7

02 TV InstallationAssembling the swivel (43″-65″)

WARNING: If you configure the TV to swivel, you must attach it securely to the floor, a desk, a dresser top, etc. as described in the installation instructions.

The LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL.

• This function is not available on the HG75AJ690U model.* The product ships with its stand's swivel angle set to 20°.

* 20° swivelTo configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°. Then, fix the Bracket Holder Swivel to the stand using the three supplied screws as shown below.

60° swivelTo configure the TV so that it swivels 60° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 60°. Then, fix the Bracket Holder Swivel to the stand using the three supplied screws as shown below.

90° swivelTo configure the TV so that it swivels 90° left and right, remove the Bracket Holder Swivel, and then screw the three supplied screws into the stand as shown below.

English - 8

Installing the LED TV Stand

Assembling the Stand and Components (43″-65″)When installing the stand, use the provided components and parts.

A B

(43″-55″) (65″)

BN96-32380B x 4 (M4 x L14)orBN96-32380C x 4 (M4 x L14)

BN96-36261A x 4 (M4 x L14)orBN96-36261B x 4 (M4 x L14)

C

D

Stand Guide Stand Screws

x 4(M4 x L14)

43″-55″1x 4(M4 x L14)

65″

2 3x 4 (M4 x L14)

Tight the bottom screw first, and upper screw last. • Progress the assembly of screw in the manual’s order.

• Place a soft cloth over the table to protect the TV, and then place the TV so that its screen faces down toward the table surface.

• Insert the Stand Guide into the slot on the bottom of the TV. • Slide and assemble it to the end line in the direction of arrow.

English - 9

4 43″ 49″-65″

NOTE • Make sure to distinguish between the front and back of each component when assembling them. • Make sure that at least two persons lift and move the TV.

Assembling the Stand and Components (75″)

A B

x 4 (M4 x L14)

Stand Screws

1

2 3

x 4(M4 x L14)

NOTE • Make sure to distinguish between the front and back of each component when assembling them. • Make sure that at least two persons lift and move the TV.

English - 10

Assembling the Hotel Mount Kit (43˝-65˝)

A B C D

Short Bolt x 2 Long Bolt x 2 Washer x 2 Nut x 2

A B

C

D

or

[ Affix the stand to a flat surface such as a dresser top, desk top, or entertainment centre as shown.

WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions.

English - 11

Installing the wall mount kitYou can mount the TV on the wall using a wall mount kit (sold separately).

Wall mount Adapter

Wall mount Adapter

Wall mount bracket

TV

Wall mount bracket

C

C

TV

• The Product shape may differ depending on the model.The wall mount kit (sold separately) allows you to mount the TV on a wall.For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own.

Securing the TV to the WallCaution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilise the TV. This action may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device.

To Prevent the TV from Falling • TV Holder Kits are sold separately. To purchase a TV Holder Kit, contact Samsung Customer Care.

1. Insert the screws into the wall brackets and firmly fasten them to the wall. Make sure the screws are firmly fixed to the wall.

– We strongly recommend you drive the screws into a stud.2. Insert the screws into the wall brackets and firmly fasten the screws to the top VESA screw holes on the back of

the TV.3. Connect the brackets on the TV and the brackets on the wall with a strong string or cable, and then tie the string or

cable tightly to the brackets. – Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If

you have any doubt about the security of your connections, contact a professional installer. – Install the TV close to the wall so that it does not fall. – Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on

the TV. Untie the string or cable before moving the TV.

English - 12

Wall Mount Kit Specifications (VESA)Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury.

• The wall mount kit is not supplied, but sold separately. • NOTE

– Standard dimensions for wall mount kits are shown in the table below. – Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided. – Do not use screws that do not comply with the VESA standard screw specifications. – Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw

specifications. Screws that are too long may cause damage to the inside of the TV set. – For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may

differ depending on the wall mount specifications. – Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to

personal injury. Samsung is not liable for these kinds of accidents. – Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is

used or the consumer fails to follow the product installation instructions. – Do not mount the TV at more than a 15 degree tilt. – Always have two people mount the TV onto a wall.

TV size in inchesVESA screw hole specs (A * B) in millimetres

C (mm)Standard

ScrewQuantity

43-55 200 x 20043-45 M8 4

65-75 400 x 400

Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric shock.

English - 13

Providing proper ventilation for your TVWhen you install your TV, maintain a distance of at least 4 inches (10 cm) between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an increase in its internal temperature.When you install your TV with a stand or a wall mount, we strongly recommend you use parts provided by Samsung Electronics only. Using parts provided by another manufacturer may cause difficulties with the product or result in injury caused by the product falling.

Installation with a stand Installation with a wall mount

10 cm

10 cm10 cm 10 cm10 cm

10 cm

10 cm

English - 14

03 The Remote ControlAbout the Buttons on the Remote Control

• The images, buttons, and functions of the remote control may differ depending on the model. • The remote control has Braille points on the Power, Channel, Volume, and Select buttons and can be used by

visually impaired persons.

Displays and selects the available video sources.

Turns the sound on/off.

Launches the Channel List.

Changes the current channel.

Exits the menu.

Use these buttons according to the directions on the TV screen.

Use these buttons with specific features. Use these buttons according to the directions on the TV screen.

Launches the APPS.

Press to display information on the TV screen.

Moves the cursor, selects the onscreen menu items, and changes the values seen on the TV's menu.

Turns the TV on and off.

Gives direct access to channels.

Adjusts the volume.

Alternately selects Teletext mode, Full > Double > Mix > Off.

Displays the Electronic Programme Guide (EPG).

Displays the main on-screen menu.

Quickly select frequently used functions. (Not available)

Returns to the previous menu or channel.

ALARMEnter the hour you want the TV to

turn on.

XTurns the 3D image on or off. (Not

available)

SUBT.When pressed the button, the Accessibility Shortcuts menu

appears.

E (Select)Press this button to select or run a

focused item.

Launches Home Menu.

English - 15

Installing batteries into the remote control

Match the polarity of the batteries to the symbols in the battery compartment. • Use the remote control within 7 m of the TV. • Bright light may affect the performance of the remote control. Avoid using near bright fluorescent lights or neon

signs. • The colour and shape of the remote may vary depending on the model.

English - 16

04 Initial SetupWhen you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on the screen and configure the TV's basic settings to suit your viewing environment.If you already completed the Initial Setup, run the Initial Setup again using the following menu.

• Hotel Option (MUTE > 1 > 1 > 9 > SelectE) > System > TV ResetIf you select TV Reset, the TV resets all values to their factory defaults. When the TV turns off, press the POWER button on the remote control to turn on the TV. The TV starts the Initial Setup.

• The image on your TV may differ from the image above depending on the model and geographical area.

1

Next

Region SettingsChange the region settings if you are located in North America, Latin

America, or Europe. Your TV might not function if the region settings are notcorrectly configured. When the region settings are changed, your TV will

automatically restart to apply them.

Country List

Select the region settings • Before select region, refer to the country list information on the right. • If you select the incorrect region, execute TV Reset again after the Initial Setup is

completed. • If the region is changed, the TV automatically turns off and on.

2

Welcome to Samsung TV!Select your language to start the on screen setup.

Bienvenue!

Welcome!Bienvenido!

Use the Up and Down buttons to change the

language.

Next

Selecting your languageYou can change the menu language.

3

Next

TV installation TypeSelect your TV installation type.

TV Basic Setup

Cloning Mode

Factory Menu

Start basic setup to use your TV.

Selecting your TV installation type • Basic TV Setup: Select to proceed to the next step to set the basic options for

using your TV. • Cloning Mode: Copy the system settings from the USB or server to the TV. • Factory Menu: End Initial Setup and go to Hotel Option menu directly.

4

Next

Configure your TVSet the basic options to use your TV.

Country OthersSelect the country that you are currently in.

1 2 3

Picture Mode Standard

Setting basic options for using your TV • Country: You can select the country that you are currently in. • Picture Mode: You can select the picture mode that provides the best viewing

experience.

5

NextPrevious

Terr./Cable Signal DetectedSelect each item and choose the correct setting. Then select Next to search for channels.

Select the connected aerial that you want to use to get channels

Aerial

Next

Terrestrial

2 3

Channel Type Digital & Analogue

Selecting the broadcasting signal • You can selecting the connected aerial that you want to use to get channels.

6

Next

Scan ChannelsScanning for channels...

Digital- TV- Radio- Data/Other

Analogue

Stop

2 3Previous

Scanning Channel • After channel sanning is completed, select Next or press the right directional

button on the remote control. • When the RF cable is not connected, this step is skipped.

English - 17

7

NextPrevious

Clock SettingsSet the correct time by applying daylight saving time (if

required) and setting your local time zone.

AutoCurrent Time

--:-- --

2 3

Clock Mode

--/--/----Date

--:-- --Time

OffDST

AutoTime Zone

Setting the current time • If the TV will be tuned to digital broadcast channels, and these channels transmit

date and time information, set the Clock Mode to Auto. The TV will set the date and time automatically.

• If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and time on the TV manually.

• Set DST (Daylight Saving Time) to On or Off to apply to the TV. • Select your time zone.

8

Setup Complete!Your TV is now ready to use.

Done

Setup completeSelect the Done button to complete the Initial Setup. Then Hotel Option menu appears. Press POWER button to exit.

Using the TV ControllerYou can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu. The Control menu appears when the TV Controller is pressed while the TV is On. For more information about its usage, refer to the figure below.

• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached. Please remove the protective film.

TV Controller / Remote control sensor

Press: Move

Press & Hold: Select

The TV Controller is located on the bottom of the TV.

Control menu

: Power off : Volume Up

: Channel Up : Volume Down

: Channel Down : Source

English - 18

05 The Connection Panel

➀

➁

➂

➃➄

➅

➆ ➇➈➉

AV IN COMPONENT IN

BACK OF TELEVISION

• Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. • When connecting an external device, match the colour of the connection terminal to the cable.

① USB (5V 0.5A), USB (HDD 5V 1A) – Connector for software upgrades and Media Play, etc. – Service connection.

② DIGITAL AUDIO OUT (OPTICAL)Connects to a Digital Audio component.

③ HDMI IN 1, 2, 3 (ARC)Connects to the HDMI jack of a device with an HDMI output.

– No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video.

– It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version, contact to the Samsung customer care centre.

English - 19

④ LANConnect to a wired LAN using CAT 7 cable.

⑤ COMPONENT IN / AV IN – Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices, VCRs. – Connect audio cables to L-AUDIO-R on your TV (with AV IN / Component IN Adapter) and the other ends to

corresponding audio out jacks on A/V or Component devices. – The COMPONENT IN jack is also used as the VIDEO jack. – Connect component video cables (not supplied) to the component jacks (PR, PB, Y) on your TV (with AV IN /

Component IN Adapter) and the other ends to corresponding component video out jacks on a DVD player. Match the colours on the jacks and cables.

– If you want to connect both a set-top box and a DVD player, you should connect the set-top box to the DVD and connect the DVD to the component jacks (PR, PB, Y) on your TV (with AV IN / Component IN Adapter).

– The PR, PB and Y jacks on your component devices (DVD) are sometimes labelled Y, B-Y and R-Y or Y, Cb and Cr.

– For AV devices, connect RCA audio cables (not supplied) to L-AUDIO-R on your TV (with AV IN / Component IN Adapter) set and the other ends to corresponding audio out jacks on an external device.

– When your are connecting a composite (AV) device to AV IN [Y/Video], connect the video cable (yellow) to the AV IN [Y/VIDEO] jack (green/yellow).

⑥ ANT IN – To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system

⑦ DATA – Used to support data communication between the TV and the SBB or STB. – Connects using RJ-12 TV type plugs.

⑧ RJPConnect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external devices (Camcoder, PC, DVD players etc.) easily.

⑨ VARIABLE AUDIO OUTUsed for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).

⑩ VOL-CTRLUsed to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-CTRL port.

English - 20

06 ConnectionsConnecting to your Internet networkYou can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection.

• After you have physically connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection after the Initial Setup process, through the TV’s menu.

Establishing a wireless Internet connectionConnect the TV to the Internet using a standard wireless router or modem.

Wireless IP Router or Modem that has a DHCP Server

LAN Cable (Not Supplied)

The LAN Port on the Wall

• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE 802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly.

• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure.

• Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers, and then enter that key into the router through its menu. You then must enter this security key into any other devices you want to connect to the wireless network.

English - 21

Network Security ProtocolsThe TV only supports the following wireless network security protocols:

• Authentication Modes: WEP, WPAPSK, WPA2PSK • Encryption Types: WEP, TKIP, AES

In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802.11n mode.If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings.Your Smart TV cannot connect to uncertified wireless routers.

Establishing a wired Internet connectionThere are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:

The Modem Port on the Wall

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

TV Rear PanelExternal Modem(ADSL / VDSL / Cable TV)

TV Rear PanelThe Modem Port on the Wall

Modem Cable(Not Supplied)

LAN Cable(Not Supplied)

LAN Cable(Not Supplied)

External Modem(ADSL / VDSL / Cable TV)

IP Router that has a DHCP Server

TV Rear PanelThe LAN Port on the Wall

LAN Cable (Not Supplied)

• The TV does not support network speeds less than or equal to 10Mbps. • Use Cat 7 cable for the connection.

English - 22

Connecting the TV to an SBB or STB

ETH MODEM

TV Rear PanelSTB (SBB)

Data Cable

Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. • The ETH MODEM jack name that you connect the Data Cable to may differ depending on the SBB or STB type. • The remote control IR signal need to meet the following specification to use IR pass through function.

IR signal reciever specification – Band pass filter centre frequency: 37.9 ㎑ – Carrier Frequency, Duty 50% – Minimum Burst Length (tburst): 12 pulses (316 us) – Minimum Gap Time Between the burst (tburst gap): 16 pulses (422 us) – Minimum Gap Time between the data commands (tpause): 25 ㎳

Compatible Data Cables Supplied with the TV • Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables.

CON BCON A

1

6

6

1

TV SIDESTB SIDE

CON A6: NC5: IR4: GND3: Rx2: Tx1: Nc

1: NC2: GND3: Tx4: NC5: Rx6: IR

CON BCON A CON B

65

24

53

32

• Operation Specification of Data Cable(RJ12) : RS232

English - 23

Connecting the Bathroom SpeakersYou can connect the Bathroom Speakers using the following method.

Connecting through the Variable Output (available without an external amplifier)

VOL+

VOL-

TV Rear Panel

Volume Control Box

Speaker

2

1

• The rear panel may differ depending on the model.1 Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.

Speaker +

Speaker - N/C

2 Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel. – The maximum speaker output is 4W, 8Ω. – The VARIABLE AUDIO OUT port supports MONO sound out only.

• Installing the Volume Control – If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom

speakers. – The jack that connects the Volume Control Box to the TV is a 3.5mm normal Phone jack. – Volume Control Box switch is a Tact switch.

• Setting the Sub AMP Mode – 0: Turns the Sub AMP function off (PWM off). – 1: Determines the Sub volume according to the main volume control. The sub volume is determined according

to the Power On Volume, the Min Volume, and the Max Volume values of Hotel Mode. – 2: Determines the volume according to the bathroom control panel setting.

• Variable Output Port Specifications – Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.

Volume Control Box

VOL - DOWN (White 1)

VOL +

VOL -

1

23

GND (Shield Wire 3)

VOL - UP (Black /Red 2)

English - 24

Connecting the RJP (Remote Jack Pack)Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV.

USB HDMI S-VIDEO RCA AUDIO/PC

RS/232

TV Rear Panel

RJP Rear

3 RS-232 Data Cable

1 Video / Audio Cable

2 HDMI cable

• The rear panel may differ depending on the model.1 Connect the AV IN [VIDEO] / [L-AUDIO-R] port of the TV (with AV IN Adapter) to the RCA port of the RJP.2 Connect the HDMI port of the TV to the HDMI port of the RJP.3 Connect the RJP port of the TV to the RS/232 port of the RJP.

– This Samsung TV is compatible with the TeleAdapt TA-7610 RJP only.

English - 25

• RJP (Remote Jack Pack): The RJP is a hardware module that has various audio and video inputs (A/V video, A/V audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding active or inactive sources.

– A group of Hotel Option menu items let you assign numbered priorities to the jacks of the RJP. 1 is the highest priority and 2 is the lowest. When a guest connects external sources to the RJP jacks, the TV will automatically switch between sources based on the priority you have assigned them in the Hotel Option menu. For example, lets say AV is set to 1 and HDMI to 2. If a guest has attached a device to the HDMI jack, and then plugs a device into the AV jack, the TV automatically switches to the device plugged into the AV jack (the jack with the higher priority). Note that a guest can also switch between devices manually by pushing a button on the RJP.

• To reset the RJP to its factory default state, press the AV and HDMI buttons simultaneously for 10 seconds. When all button LEDs blink 5 times, the RJP reset is complete.

• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.

• After the RJP reset or the TV turns off/on, it takes approximately 10 seconds to establish communications between the TV and the RJP.

• The following table shows the approximate time in seconds it takes to switch from the TV to an input source, based on assigned or default priorities.

– When no inputs are connected.

Source To Connect

AV 2 sec

HDMI 3.9 sec

– When two or more inputs are connected to the RJP and one of the input sources is disconnected and then reconnected.

Source Disconnect To Connect Total

AV 4.5 sec 2 sec 6.5 sec

HDMI 3.9 sec 3.9 sec 7.8 sec

– If the RJP has all its live sources (AV, PC, and HDMI) connected, AV has been assigned the highest priority, the RJP is in HDMI mode, and a guest removes and reconnects the AV source, the minimum time required to switch to the AV source is 6.5 seconds.

– To play audio devices (Ipods, MP3 devices, etc.) through the RJP, you must turn Music Mode AV in the menu on. – Music mode in the TA-7610 RJP is supported by the AV jack only. HDMI Music Mode is available for the

Guestlink RJP only.

English - 26

07 Setting the Hotel Option MenusTo access the Hotel Option menus, press MUTE > 1 > 1 > 9 > SelectE buttons on your remote control.To control the TV functions in the Hotel Option menu, the TV has two modes, the Standalone mode and the Interactive mode. The menu items that differ between the modes are listed below. All other items appear in both modes.Menu items in the Standalone mode only:

• SI Vendor: Movielink / Swisscom / Smoovie / SSCP • Network / DRM / Home Menu / REACH Solution / H.Browser Solution / HMS / Virtual Standby / Room Number and

its submenus.Menu items in the Interactive mode only:

• SI Vendor: Samsung and other vendors.After a menu appears, follow these general directions to navigate and change values:

• Use the directional buttons on the remote control to move from menu item to menu item. • Press the SelectE button on the remote control to select a menu item. The screen displays that menu item only. • Press the left or right directional button to change a value. The right directional button increases numerical values.

The left arrow button decreases numerical values. • When the screen is displaying one menu item, you can press the up or down directional button to display the next

or previous menu item. • Press the RETURN or MENU button to exit the current menu item and go to a higher menu level or the main menu. • To exit a Hotel Option menu, turn off the TV, and then turn it on again. Any changes you made are saved except SI

(System Integration) vendor. For changes to SI vendor, you must turn the TV off, wait until the power indicator at the bottom of the TV glows steadily. And then unplug the TV, wait for the power indicator to go off, and then plug the TV in again.

To change menus between the Interactive mode and the Standalone mode, follow the steps below:1. Highlight the Hospitality Mode menu item in the top left corner of the menu.2. Press the SelectE button on the remote control. Only the Hospitality Mode menu item is displayed.3. Press the left or right directional button to change the Hospitality Mode item from Standalone to Interactive or

from Interactive to Standalone.4. Press the RETURN or MENU button on the remote control. The entire menu re-appears with your selection

displayed in the Hospitality Mode field. – After you have set the values in one TV, you can clone those values to multiple TVs. – For more information about the USB cloning refer to page 39.

English - 27

Hotel Option menu itemsTo enter this menu, press the MUTE > 1 > 1 > 9 > SelectE buttons on the remote control in order.To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then turn on again. Any changes you made are saved.

• The menu items may not be supported depending on the models.

Hotel Option menu Item Description

Hospitality ModeSelect Hospitality Mode.

• Interactive: TV works with an SI STB or SBB. • Standalone: TV works alone, without an SI STB or SBB.

SI Vendor • Interactive: Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere /

Quadriga / ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / Enseo • Standalone: OFF / Movielink / Swisscom / Smoovie / SSCP

Power On

Power On Channel

Set the channel to display when the TV is turned on. • User Defined: Lets you set the channel number manually on Power On Channel

Num. See Power On Channel Num or Power On Channel Type blow. • Last Saved: If you select this item, when the TV is turned on, it displays the

channel it was displaying when it was turned off.

Power On Channel Num When the TV is turned on, it switches automatically to this channel.

Power On Channel TypeSelect the type of the channel will be displayed when the TV is turned on.ATV (analogue aerial band), DTV (digital aerial band), CATV (analogue cable band), CDTV (digital cable band), SDTV (digital satellite band).

Power On Volume • User Defined: Lets you set volume level manually. • Last Saved: When the TV is turned on, it returns to the volume that had been set

when the power had been turned off.

Power On Volume Num The TV turns on with set volume level in Standalone mode.

Min Volume The minimum volume level the user can set in Standalone mode.

Max Voume The maximum volume level the user can set in Standalone mode.

Power On Source Select the input source to display when the TV is turned on.

Power On Option

Determines the TV's state when power returns after a power failure or after you have unplugged the TV and then plugged it in again.

• Last Option: Returns to its last power state. If it was in standby mode, it returns to standby mode. If it was on, it turns on.

• Power ON: When the power returns, the TV turns on. • Standby: When the power returns, the TV enters the standby mode.

English - 28


Channel

Channel SetupGives you direct, immediate access to some of the channel menu functions on the Broadcasting menu such as Auto Tuning, Audio Options, etc.

Channel Editor

Lets you edit the channels stored in the TV's memory. • Change the channel numbers and names, manage genre and language groups

and delete channels. • Apply the Screen Off to channels you select. The Screen Off blanks out the video

from a channel and outputs only audio. • Lets you view information about each channel easily, without your having to

display each channel directly.

Channel Bank Editor

Edits channels, with 3 different Bank options. There are specific channels customers can enjoy, depending on the Bank card.

• This function is only available when set to Hospitality Mode: Standalone, SI Vendor: Smoovie.

Mixed Channel Map

Enables showing/browsing all antenna type (Aerial/Cable) channels at the same time.

• ON: When set to on, guests can access the complete channel map irrespective of the selected antenna type. The Channel List/Channel Editor will also populate Aerial as well Cable type channels.

• OFF: When set to off, guest can access the channel map corresponding to the selected antenna type (Aerial/Cable) only. The Channel List/Channel Editor will only show the selected antenna type channels.

Dynamic SI • ON: Do not check the DTV programme channel number. • OFF: Check the DTV programme channel number.

Channel Rescan Message

When there is a mismatch between the data in the channel map and the transmitted data, the TV autotunes the channels to restore the data/parameters in the channel map.

• ON: When Channel Rescan Message is set to on, the OSD showing that the channels are being rescanned will be displayed to the guest.

• OFF: When Channel Rescan Message is set to off, if the rescan message OSD should not to be displayed to the guests.

MychannelEnable or disable the My Channel function.

• This function is not available when set to Hospitality Mode: Standalone, SI Vendor: Smoovie.

English - 29


Channel

TTX Widescreen ModeON: TTX should show in 16:9 picture size.OFF: TTX should show in 4:3 picture size.

Broadcasting Sel

This function is enabled only for Philippines Local Set (ED_PHI) to set the cable DTV reception method in Philippines.

• DVB-C 6MHz: Receives 6 MHz bandwidth broadcast signals for cable DTV (DVB-C). • DVB-C 8MHz: Receives 8 MHz bandwidth broadcast signals for cable DTV (DVB-C).

If you change the function value, data in such as the channel list and the channel map may be reset. In this case, you must run Auto Tuning again.

Menu OSD

Picture Menu Lock Enable or disable the Picture menu.

Menu Display • ON: The main menu is displayed. • OFF: The main menu is not displayed.

Channel Menu Display • OFF: Broadcasting menu is disable for guest. • ON: Broadcasting menu is enable for guest.

Panel Button Lock

Turning the TV Controller button operations on or off. • Unlock: Unlocks TV Controller button. • Lock: Locks TV Controller button. • OnlyPower: Locks TV Controller button except the power off function.

Clock

Local Time

Select the way to update the clock data • Standalone: Manual / TTX / Time Channel • Interactive: Manual / Auto / TTX / Time Channel – Manual: The clock is set automatically from the DTV channel or manually by the

user when the TV is in Standalone mode. – TTX: Bring up the time information from the TTX stream. – Time Channel: The clock is set from the selected channel.

Timer TypeEnable or disable the alarm function.

• WakeUp: Enable the alarm function to turn on the device at the specified time. • OnOff: Disable the alarm function and enable on or off timer.

Time Channel TypeSelect the type of the channel to update the clock data.

• This function is only available Local Time set to Time Channel.

Time Channel NumSelect the number of the channel to update the clock data.

• This function is only available Local Time set to Time Channel.

English - 30


Music Mode

Music Mode AV

Allows music output from an mp3/audio player connected to an AV input source on the TV. When set to on, you can hear sound from the player through the TV whether there is a video signal or not. Also mutes the video so the TV does not display a picture when a guest is playing music. The TV's backlight, however, remains on.

Music Mode Comp

Allows music output from an mp3/audio player connected to an component input source on the TV. When on, you can hear sound from the player through the TV whether there is a video signal or not. Also mutes the video so the TV does not display a picture when a guest is playing music. The TV's backlight, however, remains on.

Music Mode Backlight

When set to off, the TV's backlight is turned off entirely when a guest is playing music through the extenal device. (ex. DVD player, USB flash drive) To save energy, set to off. To play the music through the external device, press the SOURCE button on the remote control, and then select external device icon.

Remote JackPack

Priority AV

Lets you set the priority of the 7610 RJP AV jack. You can choose 1, 2, with 1 being the highest and 2 the lowest. The TV automatically displays the source with the higher priority. For example, lets say AV is set to 1 and HDMI is set to 2. If a guest connect external devices to the HDMI jack and AV jack, the TV will automatically switch to the external device connected into the AV jack (the jack with the higher priority). Note that a guest can also switch devices manually by pushing a button on the 7610 RJP.

Priority HDMILets you set the priority of the 7610 RJP HDMI jack. You can choose 1, 2, with 1 being the highest and 2 the lowest. The TV automatically displays the source with the higher priority.

HDMI OptionSelect which HDMI source of the TV is connected to the RJP jack. (HDMI1/HDMI2/HDMI3)

HDMI Music Mode

Allows music output from an mp3/audio player connected to an HDMI input source. When set to on, you can hear sound from the player through an HDMI input of the RJP whether there is a video signal or not.

• This option is only compatible with the Guest link RJP.

ExternalSource

USB Pop-up Screen

When USB is connected to the TV : • Default: A popup window appears. • Automatic: This enters the USB content menu automatically. • Disable: Neither the popup window nor the menu appears.

External Source Banner

If set to on, the TV displays the External Source Banner (information) when you change the TV source to another external input, press the SOURCE button on the remote control, or turn on the TV.

• ON: The External Source Banner (information) is displayed on the TV screen. • OFF: The External Source Banner (information) is not displayed on the TV screen.

Auto Source • ON: When an external input source is connected to the TV, the TV identifies the

input source, and then automatically switches to that input source. • OFF: Auto Source function is disabled.

Anynet+ Return SourceSelect the source to return after stopping an Anynet+ (HDMI-CEC) connection.

• This function is especially useful for the Guestlink RJP.

English - 31


BathroomSpeaker

Sub Amp Mode

Determines the bathroom speaker sound AMP operation mode. • 0: Turns the bathroom speaker sound AMP function off (PWM off). • 1: The bathroom speaker sound volume follows the TV speaker sound volume

identically. The bathroom speaker sound volume is controlled by the TV remote control or TV's panel buttons.

• 2: The bathroom speaker sound volume is controlled by the bathroom speaker volume controller.

Sub Amp Volume The initial bathroom speaker sound volume after TV is turned on.

Eco Solution

Power Saving Mode

Adjusts the brightness of the TV to reduce power consumption. • OFF: Turns off the energy saving function. • Low: Sets the TV to low energy saving mode. • Medium: Sets the TV to medium energy saving mode. • High: Sets the TV to high energy saving mode.

Logo/Message

Welcome Message Displays a the welcome message for 60 seconds when the TV turns on.

Edit Welcome Message Edits the welcome message.

Hospitality Logo

Turns the Hospitality Logo function is set to OFF, BMP, AVI, BOTH. If the function is not set to OFF, the TV is turned on, the logo is displayed, before the signal from the initial source, for the amount of time set in Logo Display Time.

• The DivX codec is not supported.

Hospitality Logo DL

You can download the startup logo from the connected USB flash drive.Hospitality logo file requirements:

• Image or video files only. • The image file is supported up to 2 MB. • The video file is supported up to 50 MB. • File can only be named "samsung_image.*", "samsung_video.*"

Logo Display Time Set the time displayed Hospitality Logo. (3/5/7 seconds).

Cloning

Clone TV to USB Clone the current TV options to a USB memory device.

Clone USB to TV Clone the saved TV options on a USB memory device to the TV.

Setting Auto InitializeIf you set Setting Auto Initialize to On, the TV menu items are restored again to their values cloned initially when the TV turns off and then on.

English - 32


Network

Network Setup

If this item is entered into, Network menu is displayed. The Network menu is used for setting network like internet access.

• Network Status: View the current network and Internet status. • Soft AP: Turns on or off the Soft AP. When Soft AP is set to on, your mobile devices

can find the TV name in Wi-Fi connection list. – When the TV connected with wireless network, Soft AP is enabled. • Security key: Set a security key that you need to enter on other devices so they can

connect to the TV. • Open Network Settings: Connect to an available network. – Input the generated security key into the device you want to connect. – If network does not operate normally,check the security key again. An incorrect

security key may cause a malfunction. – Soft AP may not be available if it is not supported by the model. – Maximum number of devices that can be connected: 4 devices. – Bitrate: 10 Mbps/device. – The specifications above are based on our in-house testing. Actual performance

may vary depending on your wired/wireless network environment.

Apps ID SettingThe feature to set specific Hotel ID for installing the app of the correspoding hotel in the Hotel TV.

Apps SettingEnters Samsung App Store for managing current apps and installing new apps in the Hotel TV.

Service Discovery Can use this feature to enable the function like DLNA.

ARP IntervalAdjust the ARP (Address Resolution Protocol) interval value.

• Setting value: 2 / 5 / 10 / 30 / 60 / 120 / 180 second (default: 60 sec)

System Manager

Gives you direct and immediate access to System Manager menu such as such as Time, Language, Change PIN, etc.System Manager allow you to adjust your TV's system and customise settings for your viewing environment.

English - 33


Security

Factory LockDisable entry to Hotel Option menu.

• ON: The password is needed before entering Hotel Option menu. • OFF: Disable this function.

Password PopupEnable or disable password input popup window. If this option is set to off, the TV will not display the password input popup window when entering the Hotel Option menu. If set to on, the password input popup window appears.

Password Input

If this function is enabled, the password input popup window appears which asks for an 8-character security password. The admin must enter a password before applying or updating security preferences. After the correct password is entered, options such as Password Setting, Password Reset and Security Mode are available.

Password Setting User can change the password.

Password Reset Password is reset to "00000000".

Security Mode

Provides password protected administrative fucntionality to enable or disable features of hospitality TV, such as USB, HDMI. To use this option, Security Mode set to on. After Security Mode set to on, options such as USB, HDMI are automatically enabled. Clone USB to TV and TV Reset will be disabled in the Hotel Option menu.

USBEnable or disable USB access. If this function is set to disable, access to USB media is blocked.

HDMIEnable or disable HDMI access. If this function is set to disable, Anynet, HDMI source, HDMI type external channels will not be accessible to the user.

TTX SecurityIf this option is disabled, the TTX feature will not work when the TTX button is pressed on the remote control.

DRM DRM ModeConfigures DRM support.

• OFF: Turns off DRM support. • LYNK DRM: Select to turn on S-LYNK DRM CAS support only.

English - 34


System

Self Diagnosisfor TV

Enter Self Diagnosis Menu. • Start Picture Test: Use this test when you experience a problem with your TV's

picture. • Start Sound Test: Use this test when you experience a problem with your TV's

sound. • Signal Information: Show digital broadcasting signal information. • Reset Smart Hub: Reset the Smart Hub and Samsung account settings stored on

your TV. • Reset: Restore all TV settings, excluding network settings, to the factory defaults.

Self Diagnosis for HTV

Lets you check the communication with the SI STB or SBB. If you have any problems with the communications with the SI STB or SBB, use this diagnosis function. If your broadcasting system does not have a problem, contact Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem, contact to Samsung Service.

Software Update Lets you upgrade the TV Software with a USB flash dirve.

Sound Bar Out

If the Samsung Sound Bar device is connected to this TV, this item lets you to select where the TV sound is outputted when the TV is turned on.

• ON: When the TV is turned on, the TV sound is automatically outputted in the Sound Bar device only.

• OFF: When the TV is turned on, the TV sound is automatically outputted in the TV speaker device only.

Contact SamsungDisplay the web site of related Samsung service centre, software version, and Mac address information.

Standby LED

When the TV is in standby mode, you can configure the settings of the power indicator.

• ON: The LED is on. • OFF: The LED is off.

Boot Logo To enable or disable displaying the Samsung logo when the TV turns on.

TV Reset Returns all settings on the TV to their factory defaults.

English - 35


Home Menu

Home Menu Display

Activate Home Menu in Standalone mode for user. • ON: Home Menu enabled. • OFF: Home Menu disabled.

In Standalone mode, you can quickly access to various features such as Source, Media Play etc and settings such as Picture Size, Language, etc.

Home Menu Editor Edit and manage TV functions to be used from Home Menu.

Home Menu Auto StartThis option allows you to set Home Menu as first screen for user.

• ON: Home Menu is shown as first screen. • OFF: Do not show Home Menu as first screen.

REACH Solution

REACH RF ModeTurn on or off the REACH RF Mode. When set to on, the TV can operate with the REACH Server (Modulator) through the RF cable.

REACH IP ModeYou can turn on or off the REACH IP Mode. When set to on, the TV can operate with the REACH IP Server through the IP network.

Server URL Setting You can enter the address of REACH IP Server. (Example: http://192.168.1.2:443)

REACH ChannelThis is a DTV cable channel PTC number for receiving REACH data when the REACH RF Mode set to on. The value must be same as the value set on the REACH Server (Modulator).

Group IDYou can set the TV's group ID to manage TVs in groups on the REACH Server (Modulator).

REACH Update Time

You can set the specific time to receive and update REACH data from the REACH Server (Modulator). (Operates when the AC power cord is plugged in and the power is off.)

• OFF: You can turn off the REACH Update Time function. • 12:00 am: 12:00 am everyday • 2:00 am: 2:00 am everyday • 12:00 pm: 12:00 pm everyday • 2:00 pm: 2:00 pm everyday

REACH Update ImmediateWhen set to on, the TV will receive and update REACH data from the REACH Server (Modulator) right after the power is off. (Operates when the AC power cord is plugged in and the power is off.)

REACH Config Version Displays the TV configuration data version received from the REACH Server.

English - 36


H.Browser Solution

H.Browser Mode You can turn on or off the H.Browser Mode and run the H.Browser Web App.

URL Launcher Setting

H.Browser Solution settings menu • Install Web App: Enter the H.Browser server URL where Web App and sssp_config.

xml files are located. • Uninstall: You can delete the installed Web App. • Timeout setting: Set the timeout period for connecting to the URL. • Developer Mode: If you used Tizen Studio (SDK) for development, you can connect

to the Host PC (which SDK is installed) to use the development tool.

HMS

HMS ModeYou can turn on or off the HMS Mode. When set to on, the TV can operate with the HMS server through the IP network.

HMS Server URL Setting You can enter the HMS server's address. (Example: http://192.168.1.2:8080)

HMS Gateway RoleWhen there is one TV per room, set to Master.When there are more than one TVs per room, set the main TV to Master and the others to Slave.

HMS HalfTicker Display

Set to on if you want to use the HalfTicker UI.When set to off, the HalfTicker UI will not be displayed. However, all the hot keys (except for room control key) on the HMS remote control will work normally without the HalfTicker UI Display.

Virtual Standby

Virtual Standby ModeWhen the AC power cord is plugged in and the power is off, this option maintains the TV's important features even after the screen is off.

• Electricity consumption may vary depending on the environment.

Reboot TimeAfter the TV power is off (in Virtual Standby Mode) if there is no input from the user within the set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.

Room Number You can set the room number of the TV's location.

• Refer to the manual of each solution for details about functions and settings of the solutions such as REACH, HMS, and H.Browser.

• REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents through RF cable to several hundred hospitality TVs simultaneously. The REACH functions are available only in Standalone mode. The REACH Server is sold separately. Refer to the REACH Server manual enclosed with the REACH Server product for more operating information.

English - 37

Welcome MessageHotel Option (MUTE > 1 > 1 > 9 > SelectE) > Logo/Message > Welcome MessageWelcome Message function displays a custom message on the TV every time it is turned on.

• Set Welcome Message to on to display the message when the TV is powered on. • You can make the welcome message and edit it. • You can edit the welcome message by using on screen keyboard in the Edit Welcome Message (Hotel Option >

Logo/Message > Edit Welcome Message). • Use the directional buttons on the remote control to enter the title and message, and select Save.

Hotel Logo

Hospitality LogoHotel Option (MUTE > 1 > 1 > 9 > SelectE) > Logo/Message > Hospitality LogoHospitality Logo function displays the Hotel's picture image when the TV is powered on.

• When you set Hospitality Logo to AVI / BMP / BOTH, Hospitality Logo DL and Logo Display Time are enabled. • If there is a logo image stored in memory and the Hospitality Logo is AVI / BMP / BOTH, the logo image is displayed

when the TV is turned on. • The logo image is not displayed when set Hospitality Logo to off, even if the logo image has been loaded into the

TV.

English - 38

Logo DownloadHotel Option (MUTE > 1 > 1 > 9 > SelectE) > Logo/Message > Hospitality Logo DLThis option lets you download the logo image to the TV’s memory from a USB device.

• The wait message appears while the image is being copied to the TV. • The completed message appears when the copy operation finishes successfully. • The failed message appears if the copy operation was unsuccessful. • No USB appears if no USB device is connected. • If there is no file to copy on the USB device or the file is in the wrong format, the message that there is no file

appears. • If message that there is no file appears and there is a logo file on the USB device, check the file format. • Logo file format

– TV Supports all file formats. – File name must be "samsnug_image.*" and "samsung_video.*" – Maximum file size can be 50MB for Smart models. – The TV does not change the size or scale of the image.

USB CloningHotel Option (MUTE > 1 > 1 > 9 > SelectE) > CloningThe USB cloning function lets you download user-configured settings (Picture, Sound, Channel, and Hotel Option) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard file of settings and distribute that standard file to all the TVs in your facility.

• After cloning, certain features are applied when the TV is turned on again.

Cloning TV to USB: Copies stored menu settings from a TV to a USB deviceHotel Option (MUTE > 1 > 1 > 9 > SelectE) > Cloning > Clone TV to USB

1. Insert a USB drive into the USB port on the rear of the TV.2. Enter the Hotel Option menu by pressing buttons in order. (MUTE > 1 > 1 > 9 > SelectE)3. Press the up or down directional button to select Clone TV to USB, and press the SelectE button on the remote

control.4. When the message Clone TV to USB is displayed. Press the SelectE button on the remote control. – The clone folder will be labelled T-KTM2UABCB. – The cloned values include the values on the guest side menu (Brightness, Picture Size, Contrast, etc.) and the Hotel

Option menu.

English - 39

Cloning USB to TV: Copies menu settings and channel data in a USB device to a TVShortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the SelectE button on the remote control for 5 seconds.To clone data to the TV using the Hotel menu, follow these steps:

1. Turn the TV off.2. Insert the USB drive into the USB port on the rear of the TV.3. Turn the TV on.4. Enter the Hotel Option menu by pressing buttons in order. (MUTE > 1 > 1 > 9 > SelectE)5. Press the up or down directional button to select Clone USB to TV, and press the SelectE button on the remote

control.6. The message Clone USB to TV is displayed. Press the SelectE button on the remote control. – If there is no file to copy on the USB device or the message that there is no file apears, check the folder on your USB

device. – The folder name should be T-KTM2UABCB. – Tables that list the settings that are cloned in the Hotel Option menu begin on the next page.

Pre-condition for cloning (check point) • Cloning should be done between same model (same version). • Before cloning, all displays should be updated at the latest version (same version).

English - 40

Settings Cloned in the Hotel Menu • The menu items may not be supported depending on the models.

Menu Item Sub Item Cloned or not

Hospitality Mode Standalone / Interactive Yes

SI Vendor

Interactive mode :Samsung / 2M / Locatel / VDA / VDA-S / Acentic / Sustinere / Quadriga / ETV / IBahn / Magilink / Otrum / Siemens / Amino / MDC / EnseoStandalone mode :OFF / Movielink / Swisscom / Smoovie / SSCP

Yes

Power On

Power On Channel User Defined / Last Saved Yes

Power On Channel Num *** Yes

Power On Channel Type ATV / DTV / CATV / CDTV / SDTV Yes

Power On Volume User Defined / Last Saved Yes

Power On Volume Num 0~100 Yes

Min Volume 0~100 Yes

Max Volume 0~100 Yes

Power On SourceTV / HDMI1 / HDMI2 / HDMI3 / AV / COMP / Last Saved

Yes

Power On Option Power On / Standby / Last Option Yes

Channel

Channel Setup ― No

Channel Editor ― No

Channel Bank Editor ― No

Mixed Channel Map ON / OFF Yes

Dynamic SI ON / OFF Yes

Channel Rescan Message ON / OFF Yes

MyChannel ON / OFF Yes

TTX Widescreen Mode ON / OFF Yes

Broadcasting Sel DVB-C 6MHz / DVB-C 8MHz No

Menu OSD

Picture Menu Lock ON / OFF Yes

Menu Display ON / OFF Yes

Channel Menu Display ON / OFF Yes

Panel Button Lock Unlock / Lock / OnlyPower Yes

Clock

Local TimeStandalone: Manual / TTX / Time ChannelInteractive: Manual / Auto / TTX / Time Channel

Yes

Timer Type WakeUp / OnOff Yes

Time Channel Type DTV / CDTVYes

Time Channel Num ***

Music Mode

Music Mode AV ON / OFF Yes

Music Mode Comp. ON / OFF Yes

Music Mode Backlight ON / OFF Yes

English - 41


Remote Jack Pack

Priority AV 1~2 Yes

Priority HDMI 1~2 Yes

HDMI Option HDMI1 / HDMI2 / HDMI3 Yes

HDMI Music Mode ON / OFF Yes

External Source

USB Pop-up Screen Default / Automatic / Disable Yes

External Source Banner ON / OFF Yes

Auto Source ON / OFF Yes

Anynet+Return SourcePower On Src / Last Source / Each model source list (TV, HDMI1, HDMI2, etc.)

Yes

Bathroom Speaker

SubAmp Mode 0~2 Yes

SubAmp Volume 0~32 Yes

Eco Solution Power Saving Mode OFF / Low / Medium / High Yes

Logo / Message

Welcome Message ON / OFF Yes

Edit Welcome Message ― Yes

Hospitality Logo OFF / BMP / AVI / BOTH Yes

Hospitality Logo DL ― Yes

Logo Display Time 3 second / 5 second / 7 second Yes

Cloning

Clone TV to USB ― No

Clone USB to TV ― No

Setting Auto Intialize ON / OFF Yes

Network

Network Setup ― No

Apps ID Setting ― Yes

Apps Setting ― No

Service Discovery ON / OFF Yes

ARP Interval 2s / 5s / 10s / 30s / 60s / 120s / 180s Yes

System Manager ― No

Security

FactoryLock ON / OFF Yes

Password Popup ON / OFF Yes

Password Input ― No

Password Setting ― Yes

Password Reset ― No

Security Mode ON / OFF Yes

USB Enable / Disable Yes

HDMI Enable / Disable Yes

TTX Security Enable / Disable Yes

DRM DRM Mode OFF / LYNK DRM Yes

English - 42


System

Self Diagnosis for TV ― No

Self Diagnosis for HTV

STB SI Vendor Setting Si Name Sucess / Failure

NoBathroom AMP Sucess / Failure

RTC Sucess / Failure

Software Update ― No

Sound Bar Out ON / OFF Yes

Contact Samsung ― No

Standby LED ON / OFF Yes

Boot Logo ON / OFF Yes

TV Reset ― No

Home Menu

Home Menu Display ON / OFF Yes

Home Menu Editor ― Yes

Home Menu Auto Start ON / OFF Yes

REACH Solution

REACH RF Mode ON / OFF Yes

REACH IP Mode ON / OFF Yes

Server URL Setting ― Yes

REACH Channel *** Yes

Group ID ALL, 1 - 511 No

REACH Update Time OFF / 12:00 am / 2:00 am / 12:00 pm / 2:00 pm Yes

REACH Update Immediate ON / OFF Yes

REACH Config Version ― No

H.Browser Solution

H.Browser Mode ON / OFF Yes

URL Launcher Setting ― Yes

HMS

HMS Mode ON / OFF Yes

HMS Server URL Setting ― Yes

HMS Gateway Role Master / Slave Yes

HMS HalfTicker Display ON / OFF Yes

Virtual StandbyVirtual Standby Mode ON / OFF

YesReboot Time OFF / 5 / 15 / 30 / 60

Room Number ― No

English - 43

Setting Auto InitialiseHotel Option (MUTE > 1 > 1 > 9 > SelectE) > Cloning > Setting Auto InitializeWhen you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Channel, and Hotel Option menu. This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function to on the TV automatically restores (initialises) any guest-side menu values to the cloned, standard values when the TV is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not been cloned are ignored.The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to on.

• The menu items may not be supported depending on the models.

Menu Item

Picture

Picture Mode

Picture Size Settings

Picture Size

Fit to screen

Zoom and Position

Expert Settings

Backlight

Brightness

Contrast

Sharpness

Colour

Tint (G/R)

Apply Picture Settings

Digital Clean View

Auto Motion Plus Settings

Auto Motion Plus

Judder Reduction

LED Clear Motion

Contrast Enhancer

HDR+ Mode

Film Mode

Colour Tone

English - 44

Menu Item

Picture Expert Settings

White Balance

2 Point

R-Gain

G-Gain

B-Gain

R-Offset

G-Offset

B-Offset

20 Point Settings

20 Point

Interval

Red

Green

Blue

Gamma

HLG

ST.2084

BT.1886

RGB Only Mode

Colour Space Settings

Colour Space

Colour

Red

Green

Blue

Sound

Sound Output

Sound Mode

Expert Settings

Balance

Equaliser

HDMI Input Audio Format

Digital Output Audio Format

Audio Delay

Auto Volume

Sound Feedback

English - 45

Menu Item

General

System Manager

Time Clock Clock Mode

Language

Auto Protection Time

External Device Manager

Anynet+ (HDMI-CEC)

Game Mode

HDMI UHD Color

HDMI Black Level

Input Device ManagerKeyboard Language

Keyboard type

Eco Solution

Ambient Light Detection

Minimum Backlight

Energy Saving Mode

Motion Lighting

Auto Power Off

Accessibility

Audio Description Settings

Audio Description

Audio Description Volume

High Contrast

Greyscale

Enlarge

English - 46

Updating the TV’s SoftwareDO NOT turn off the TV’s power until the update is complete. The TV will turn off and on automatically after completing the software update. Video and audio settings will be reset to their defaults after a software update. We recommend you clone the TV's settings so that you can easily reset them after the upgrade.

• For more information about the USB cloning function, refer to page 39.

Updating through a USB deviceTo update the TV's software, follow these steps:

1. Insert a USB flash dirve containing the software update file into the USB port of the TV.2. Run Update Now. (MENUm > Support > Software Update > Update Now)3. The TV displays a pop-up message that checks for the updated version.4. Move the focus to OK, and then press the SelectE button on the remote control. – Please be careful to not disconnect the power or remove the USB flash dirve while upgrades are being applied. The

TV will turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are complete.

English - 47

08 Using a Multi Code RemoconA Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful where there is more than one TV in a location.You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are displayed on each TV's OSD.The Initial ID code for each TV is 0.

• You can set and reset the ID code in analogue TV mode or PC mode. (Not available in DTV mode.) • You can set the ID code to any digit from 0 to 9. • To set a TV's ID code, follow these steps:

1. Aim the remote at the TV, and then press the MUTE button and the RETURN button simultaneously for more than 7 seconds. When you stop pressing the buttons, the TV displays the current ID in the middle of the screen and a message appears.

2. Press the number on the remote you want to assign to the TV. The TV displays a message.3. After you see the message, if you press 1, the TV and Remote will be set to ID code 1. – The TV can then only be controlled by a remote which has the same ID code 1. – To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When you

stop pressing the buttons, the ID codes of the TV and Remote are reset to 0.

English - 48

09 Setting the SoundbarSamsung Soundbar (AirTrack) and Hospitality TVs in 2018

• Samsung Soundbar (AirTrack) and hospitality TVs support the HDMI ARC feature If you connect a compatible Samsung Soundbar (AirTrack) to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV's sound through the Soundbar (AirTrack).

• Sound bar Out in Hotel Option menu makes you control to where the TV sound is outputted when the TV is turned on.

– Hotel Option (MUTE > 1 > 1 > 9 > SelectE) > System > Sound Bar Out • If Sound bar Out set to on, the TV sound is automatically outputted in the Soundbar (AirTrack) device only whenever

TV is turned on. • If Sound bar Out set to off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on. • Models supporting the ARC function are listed below:

– HW-M550/M500/M4500 – HW-N650/N550/N450

Setting the Soundbar (AirTrack) to Hotel Mode1. Set the following options in Hotel Option (MUTE > 1 > 1 > 9 > SelectE):

– System > Sound Bar Out > ON – Power On > Power On Volume > User Defined – Power On > Power On Volume Num > set greater than 0 – Power On > Max Volume > set greater than 0

2. Connect an HDMI cable from the HDMI out port of the Soundbar (AirTrack) to the HDMI port (supporting ARC) on the TV.

3. After the Soundbar (AirTrack) is connected to the TV, when the TV turns on, the Soundbar (AirTrack) automatically detects the TV, and then automatically switches to Hotel Mode.

Soundbar (AirTrack) features in Hotel mode • Power on / off is synchronised with the TV. • HDMI-CEC defaults set to on • Avaiable only through the HDMI out port. • Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes. • Acquires adjustable Power On and Max Volume settings from the TV’s Hotel Option menu. However Soundbar's

Power On Volume and Max Volume values are set to half of Power On Volume and Max Volume settings in the TV's Hotel Option menu.

– If the TV's Power On Volume = 20 and Max Volume = 90, then Soundbar's Power On Volume = 10 and Max Volume = 45.

• To use Voice Guide while an external device is connected to the DIGITAL AUDIO OUT (OPTICAL) or HDMI IN (ARC) terminal, be sure to select PCM at MENUm > Sound > Expert Settings > Digital Output Audio Format.

English - 49

10 Editing ChannelsChannel Bank Editor (Smoovie TV Only)Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to. Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank. SMOOVIE remotes have installable Bank Cards which correspond to the channel banks in the Channel Bank Editor. The remotes only allow access to channels in the channel bank that correspond to the installed card. Consequently, the channels a guest can access depend on the Bank Card installed in their SMOOVIE remote.

Setting the Channel Bank Editor under Standalone Mode1. Press MUTE > 1 > 1 > 9 > SelectE buttons on the remote control to enter the Hotel Option menu.2. Go to SI vendor, and then select Smoovie.3. Go to Channel > Channel Bank Editor. Press the SelectE button on the remote control.4. Enter the Channel Bank Editor. Edit the Channel Bank.

– Bank1 (Free channel): Select the channels that will be accessible when a remote doesn’t have a card. – Bank2 (Family Card - Green): Select the channels that will be accessible when a remote has a GREEN CARD. – Bank3 (Adult Card - Red): Select the channels that will be accessible when a remote has a RED CARD.

Information About SMOOVIE Remote Controls • If you select SMOOVIE as the SI vendor, you should also use SMOOVIE remotes in your facility. • Guests with remotes that do not have a card can only view channels from Bank 1. • Guests using the numeric button on the remote control to change channels can only view channels from Bank 1. • Guests with remotes that have Green or Red cards must use the channel up or down directional buttons to change

channels. • Guests can only see channels from the Bank 1 channel list In the Guide or the Channel List.

English - 50

Smoovie Set Up Sequence1. Complete the Initial Setup.2. The TV displays the Hotel Option menu.

– If the Initial Setup is already done, enter the Hotel Option menu. (MUTE > 1 > 1 > 9 > SelectE)3. Select the channel type. (Power On > Power On Channel Type)

– ATV or ADTV for Aerial – CATV or CDTV for cable

4. Select Smoovie in the SI Vendor menu.5. Select Channel Setup (Channel > Channel Setup).6. Select Terrestrial or Cable to auto tune.7. Set up channels in the Channel Bank Editor (Channel > Channel Bank Editor).8. Turn off the TV, and then turn it on again. Then guests can use the TV.

Using Channel EditorHotel Option (MUTE > 1 > 1 > 9 > SelectE) > Channel > Channel EditorUsing Channel Editor you can edit the channels stored in the TV's memory.

• Change the channel numbers and names, edit the channel language and channel genre and delete channels. – This function is enabled when My Channel set to On in Hotel Option menu. (Hotel Option (MUTE > 1 > 1 > 9 >

SelectE) > Channel > My Channel) • Apply the Screen Off to channels you select. The Screen Off blanks out the video from a channel and outputs only

the sound while displaying a screen off icon on the screen. • Channel Editor also lets you view information about each channel easily, without your having to display each

channel directly.

General Steps for Using the Channel Editor in Standalone Mode

1. Run Channel Setup (Channel > Channel Setup) in the Hotel Option menu.2. Enter Channel Editor (Channel > Channel Editor) in the Hotel Option menu.3. On a piece of paper, compile a list of channels you want to have, arranged in the order you want.4. Based on the list created in Step 3, rearrange the channels and edit the channel names.5. Press the EXIT or RETURN button to exit.

English - 51

Editing the Channel Number

Change the channel number of a channel you select. To change a channel number, follow these steps:1. Select a channel on the Channel Edit screen.2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and SelectE button.3. Use the up or down directional buttons on the remote control to change the channel number.4. Select OK when done, and then press the SelectE button on the remote contorl.

– When you change the channel number, the channel information is updated automatically.

Rename the ChannelChange the name of a channel you select. To change the name of a channel, follow these steps:

1. Select a channel on the Channel Edit screen.2. Use the directional buttons on the remote control, move the focus to Rename channel, and SelectE button.3. Use the on-screen keyboard that appears to enter the new name for the channel. Use the directional buttons on

the remote control, select a letter or number, and then press SelectE button. Repeat for each letter or number you want to select.

4. When finished, select Done on the bottom of the screen, and then press the SelectE button on the remote control.

English - 52

Assigning the Channel Number to the external deviceThe external device source of the TV are displayed in the last page of the Channel Editor menu as shown below.

>

1. Select a external device source on the Channel Edit screen.2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and SelectE button.3. Use the up or down directional buttons on the remote control to assign the channel number.4. Select OK when done, and then press the SelectE button on the remote contorl. – Once you assign a channel number to an external device, you can enter the external device without opening the TV

source menu.

English - 53

11 Anti-theft Kensington LockThe Kensington Lock is a device you can use to physically fix a TV to a location when you use it in a public place. The appearance and locking method may differ from the illustration at right, depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use.The Kensington Lock is not supplied by Samsung.

• Please find the K icon on the rear of the TV. A Kensington slot is beside the K icon.

1

To lock the product, follow these steps:1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair.2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.3. Insert the locking device into the Kensington slot on the product 1.4. Lock the lock. – These are general instructions. For exact instructions, see the User manual supplied with the locking device. – The locking device has to be purchased separately. – The location of the Kensington slot may be different depending on the TV model.

English - 54

12 Specifications and Other InformationSpecifications

Model Name HG43AJ690U HG49AJ690U

Display Resolution 3840 x 2160 3840 x 2160

Screen Size (Diagonal) 43 inches (108 cm) 49 inches (123 cm)

Sound (Output) 20 W 20 W

Stand Swivel (Left / Right) 20° / 60° / 90° 20° / 60° / 90°

Dimensions (W x H x D)BodyWith stand

970.2 x 563.2 x 58.8 mm970.2 x 618.1 x 226.5 mm

1102.8 x 637.8 x 59.7 mm1102.8 x 691.8 x 226.5 mm

WeightWithout StandWith Stand

9.6 kg12.7 kg

13.2 kg16.4 kg

Model Name HG55AJ690U HG65AJ690U

Display Resolution 3840 x 2160 3840 x 2160

Screen Size (Diagonal) 55 inches (138 cm) 65 inches (163 cm)

Sound (Output) 20 W 20 W

Stand Swivel (Left / Right) 20° / 60° / 90° 20° / 60° / 90°


1238.6 x 714.2 x 59.2 mm1238.6 x 768.4 x 226.5 mm

1457.5 x 837.3 x 59.7 mm1457.5 x 908.7 x 355.1 mm


17.3 kg20.5 kg

25.0 kg30.2 kg

Model Name HG75AJ690U

Display Resolution 3840 x 2160

Screen Size (Diagonal) 75 inches (189 cm)

Sound (Output) 20 W

Stand Swivel (Left / Right) 0°


1684.6 x 966.4 x 60.6 mm1684.6 x 1056.5 x 356.1 mm


37.0 kg37.5 kg

English - 55

Environmental ConsiderationsOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity

10°C to 40°C (50°F to 104°F)10% to 80%, non-condensing-20°C to 45°C (-4°F to 113°F)5% to 95%, non-condensing

Notes • The design and specifications are subject to change without prior notice. • For information about the power supply, and more information about power consumption, refer to the label-rating

attached to the product. • You can see the label-rating attached to the back of the TV. (For some models, you can see the label-rating inside

the cover terminal.) • Typical power consumption is measured according to IEC 62087.

Decreasing power consumptionWhen you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of power. To decrease power consumption, unplug the power cord when you don't intend to use the TV for a long time.

English - 56

Supported Resolutions for UHD Input Signals • Resolution: 3840 x 2160p, 4096 x 2160p

– An HDMI connection with HDMI UHD Color set to Off supports up to UHD 50P/60P 4:2:0 input signals, while an HDMI connection with HDMI UHD Color set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2 input signals.

– MENU > General > External Device Manager> HDMI UHD Color

If HDMI UHD Color is set to Off

Frame rate (fps) RGB YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0

24 / 25 / 30 O O O -

50 / 60 - - - O

If HDMI UHD Color is set to On

Frame rate (fps) RGB YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0

24 / 25 / 30 O O O -

50 / 60 O O O O

Display ResolutionWhen you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose.

Mode ResolutionDisplay format

Horizontal frequency (KHz)

Vertical frequency (Hz)

Clock frequency (MHz)

Polarity (horizontal / vertical)

IBM 720 x 400 70 Hz 31.469 70.087 28.322 -/+

MAC640 x 480832 x 6241152 x 870

67 Hz75 Hz75 Hz

35.00049.72668.681

66.66774.55175.062

30.24057.284

100.000

-/--/--/-

VESA DMT

640 x 480640 x 480640 x 480800 x 600800 x 600800 x 6001024 x 7681024 x 7681024 x 7681152 x 8641280 x 7201280 x 8001280 x 10241280 x 10241366 x 7681440 x 900

1600 x 900RB1680 x 10501920 x 10801920 x 1200

60 Hz72 Hz75 Hz60 Hz72 Hz75 Hz60 Hz70 Hz75 Hz75 Hz60 Hz60 Hz60 Hz75 Hz60 Hz60 Hz60 Hz60 Hz60 Hz60 Hz

31.46937.86137.50037.87948.07746.87548.36356.47660.02367.50045.00049.70263.98179.97647.71255.93560.00065.29067.50074.556

59.94072.80975.00060.31772.18875.00060.00470.06975.02975.00060.00059.81060.02075.02559.79059.88760.00059.95460.00059.885

25.17531.50031.50040.00050.00049.50065.00075.00078.750

108.00074.25083.500

108.000135.00085.500

106.500108.000146.250148.500193.250

- / -- / -- / -+ / ++ / ++ / +- / -- / -+ / ++ / ++ / +- / ++ / ++ / ++ / +- / ++ / +- / ++ / +- / +

English - 57

Mode ResolutionDisplay format

Horizontal frequency (KHz)

Vertical frequency (Hz)

Clock frequency (MHz)

Polarity (horizontal / vertical)

CEA-861

720(1440) x 576i720(1440) x 480i

720 x 576720 x 4801280 x 7201280 x 720

1920 x 1080i1920 x 1080i1920 x 10801920 x 10801920 x 10801920 x 10801920 x 10803840 x 21603840 x 21603840 x 21603840 x 21603840 x 21604096 x 21604096 x 21604096 x 21604096 x 21604096 x 2160

50 Hz60 Hz50 Hz60 Hz50 Hz60 Hz50 Hz60 Hz24 Hz25 Hz30 Hz50 Hz60 Hz24 Hz25 Hz30 Hz50 Hz60 Hz24 Hz25 Hz30 Hz50 Hz60 Hz

15.62515.73431.25031.46937.50045.00028.12533.75027.00028.12533.75056.25067.50054.00056.25067.500112.500135.00054.00056.25067.500112.500135.000

50.00059.94050.00059.94050.00060.00050.00060.00024.00025.00030.00050.00060.00024.00025.00030.00050.00060.00024.00025.00030.00050.00060.000

27.00027.00027.00027.00074.25074.25074.25074.25074.25074.25074.250

148.500148.500297.000297.000297.000594.000594.000297.000297.000297.000594.000594.000

- / -- / -- / -- / -+ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / ++ / +

HDMI

3840 x 21603840 x 21603840 x 21604096 x 2160

30 Hz25 Hz24 Hz24 Hz

67.50056.25054.00054.000

30.00025.00024.00024.000

297.000297.000297.000297.000

+ / ++ / ++ / ++ / +

• The interlaced mode is not supported. • The set might operate abnormally if you select a non-standard video format. • Separate and Composite modes are supported. SOG (Sync On Green) is not supported.

English - 58

Dimensions

Front view / Side viewThe displayed image may differ from your TV, depending on the model.

• 43˝(Unit: mm)

943.2

970.2 58.8

226.5

531.4

556.5

563.2 618.1

• 49˝(Unit: mm)

1075.8

1102.8 59.7

226.5

606.0

556.5

637.8 691.8

English - 59

• 55˝(Unit: mm)

1211.6

1238.6 59.2

226.5

682.4

556.5

714.2 768.4

• 65˝(Unit: mm)

1430.5

1457.5 59.7

355.1

805.5

676.3

837.3 908.7

• 75˝(Unit: mm)

1652.2

1684.6 60.6

356.1

930.3

1256.7

966.4 1056.5

English - 60

Jack panel detail / Rear viewDetailed dimensions can be checked at Displaysolutions.samsung.com.

Base Stand detailThe displayed image may differ from your TV, depending on the model.

• 43˝(Unit: mm)

70.0

152.0

556.5

199.1226.5

R3.75R9.5

135.0

• 49˝-55˝(Unit: mm)

70.0

152.0

556.5

218.4226.5

R3.75R9.5

135.0

English - 61

• 65˝(Unit: mm)

70.0

152.0

676.3

240.9355.1

R3.75R9.5

135.0

• 75˝(Unit: mm)

53.8

356.1 214.5

• NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.

English - 62

Licences

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

THIS PRODUCT IS SOLD WITH A LIMITED LICENCE AND IS AUTHORISED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWINGQUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS NOT OFFERED FOR SALE; AND (3) HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT.THIS PRODUCT MAY NOT BE USED IN CONNECTION WITH HEVC ENCODED CONTENT CREATED BY A THIRD PARTY, WHICH THE USER HAS ORDERED OR PURCHASED FROM A THIRD PARTY, UNLESS THE USER IS SEPARATELY GRANTED RIGHTS TO USE THE PRODUCT WITH SUCH CONTENT BY A LICENSED SELLER OF THE CONTENT.YOUR USE OF THIS PRODUCT IN CONNECTION WITH HEVC ENCODED CONTENT IS DEEMED ACCEPTANCE OF THE LIMITED AUTHORITY TO USE AS NOTED ABOVE.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Open Source License NoticeOpen Source used in this product can be found on the following webpage. (http://opensource.samsung.com)Open Source License Notice is written only English.

English - 63

Contact SAMSUNG WORLD WIDEIf you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country Customer Care Centre Web SiteSINGAPORE 1800 7267864 | 1800-SAMSUNG www.samsung.com/sg/supportAUSTRALIA 1300 362 603 www.samsung.com/au/supportNEW ZEALAND 0800 726 786 www.samsung.com/nz/supportVIETNAM 1800 588 889 www.samsung.com/vn/support

THAILAND 0-2689-32321800-29-3232 (Toll free) www.samsung.com/th/support

MYANMAR +95-1-2399-888 www.samsung.com/mm/support

CAMBODIA +855-23-9932321800-20-3232 (Toll free) www.samsung.com/th/support

LAOS +856-214-17333

MALAYSIA 1800-88-9999+603-7713 7420 (Overseas contact) www.samsung.com/my/support

INDONESIA 021-5699-77770800-112-8888 (All Product, Toll Free) www.samsung.com/id/support

PHILIPPINES1-800-10-726-7864 [ PLDT Toll Free ]1-800-8-726-7864 [ Globe Landline and Mobile ]02- 422-2111 [ Standard Landline ]

www.samsung.com/ph/support

TAIWAN 0800-32-9999 www.samsung.com/tw/supportJAPAN 0120-363-905 www.galaxymobile.jp/jp/supportINDIA 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free) www.samsung.com/in/support

NEPAL 16600172667 (Toll Free for NTC Only)9801572667 www.samsung.com/in/support

BANGLADESH 0961230030008000300300 (Toll free) www.samsung.com/in/support

SRI LANKA+9411SAMSUNG (+94117267864)+94117540540+94115900000

www.samsung.com/in/support

EGYPT 08000-726786416580 www.samsung.com/eg/support

ALGERIA 3004 www.samsung.com/n_africa/supportIRAN 021-8255 [CE] www.samsung.com/iran/supportISRAEL *6963 www.samsung.com/il/support

SAUDI ARABIA (+966) 8002474357 (800 24/7 HELP) www.samsung.com/sa/homewww.samsung.com/sa_en

PAKISTAN 0800-Samsung (72678) www.samsung.com/pk/supportTUNISIA 80 100 012 www.samsung.com/n_africa/supportU.A.E 800-SAMSUNG (800 - 726 7864)

www.samsung.com/ae/support (English)www.samsung.com/ae_ar/support (Arabic)

OMAN 800-SAM CS (800-72627)KUWAIT 183-CALL (183-2255)BAHRAIN 8000-GSAM (8000-4726)QATAR 800-CALL (800-2255)TURKEY 444 77 11 www.samsung.com/tr/support

JORDAN 0800-2227306 5777444

www.samsung.com/levant/supportSYRIA 962 5777444LEBANON 1299IRAQ 80010080MOROCCO 080 100 22 55 www.samsung.com/n_africa/support

© 2018 Samsung Electronics Co., Ltd. All rights reserved. AJ690U_ASIA-00

install guide - samsung display solutions...in a wet basement, or near a swimming pool, etc.). if...

Documents