Autodesk Robot Structural Analysis Pro 2014 01. Install the application and enter the following product information: Serial number: 667-98989898 or 400-45454545 or 666-69696969 (or anything mat ching these templates). Product key: 547F1 02. After installation, run the application as administrator and click the 'Acti vate' button. (IMPORTANT: Disconnect your Internet connection before running the applicati on). 03. On the following screen you will be prompted with "Internet Connection Requi red" message. Just click 'Close' button to cancel the online activation. Click 'Yes' to co nfirm. 04. Click on the 'Activate' button again. On the following screen, please take n ote of the given "Request code". Below, choose "I have an activation code from Auto desk" option. 05. Now, unzip/extract the included keygen (xf-rsapro-kg_x64.zip) to your Deskto p. Run the keygen as administrator and press the 'Patch' button (IMPORTANT). You should see the message "Successfully patched". Click 'OK' button to clos e the message box. NOtE: Disable your antivirus program before unzipping and running the keygen. 06. Switch back to Autodesk activation screen, copy [CTRL+C] the given "Request code" and paste [CTRL+V] it into the keygen's 'Request' box/field. Click the keygen's 'Generate' button to generate the Activation code. 07. Copy [CTRL+C] the generated Activation code and paste [CTRL+V] it into the first box/field of Autodesk activation screen then press the 'Next' button. 08. The application should be now activated! Press 'Finish' button to continue o pening the application. 09. Done! You can now quit the keygen, reconnect your Internet connection and st art using the application. >:-) --------------------------------------------------------------------------------------------------------NOTES ABOUT THE KEYGEN: You must run the application and keygen as administrator in Windows 7, 8 and Vis ta. Disable your antivirus program if you are having problem running the keygen. You should use the provided keygen according to your Windows platform (32-bit or64-bit). If you install the 32-bit version of Autodesk product in 64-bit Windows environm ent, you should use the 32-bit version of the keygen to activate the product. ---------------------------------------------------------------------------------------------------------