install pnmt win2000
TRANSCRIPT
-
8/11/2019 Install PNMT Win2000
1/32
ROI-S06553-051E
071116
P ASOLINK
N ETWORK
M ANAGEMENT
T ERMINAL
PNMT (Java version)
Installation Manual
(Windows 2000)
NEC CorporationCopyright 2007
-
8/11/2019 Install PNMT Win2000
2/32
ROI-S06553
- i -
Table of Contents
1. Installation Sequence ...............................................................................................................1
2. Phone and Modem Options Setting...........................................................................................2
3. Installation of USB Com Port Driver (USB Connection) ...........................................................6
4. Dial-up Setting .........................................................................................................................9
5. SNMP Service Setting.............................................................................................................19
6. PNMT Setup ..........................................................................................................................24
7. Launching PNMT ..................................................................................................................29
-
8/11/2019 Install PNMT Win2000
3/32
ROI-S06553
- 1 -
1. Installation Sequence
Only Administrator group privilege level users are authorized to configure the following settings,
Step 1: Phone and Modem Options Setting
Step 2: Network and Dial-up Connection Setting
Step 3: SNMP Service Setting
Step 4: Pasolink Network Management Terminal (PNMT) Setup
Step 5: Launching PNMT
-
8/11/2019 Install PNMT Win2000
4/32
ROI-S06553
- 2 -
2. Phone and Modem Options Setting
(1) Click Start| Settings| Control Panel.
(2) Click the Phone and Modem Optionsicon in the Control Panel window to startconfiguring the modem. Select the Modem tab, and click [Add]to continue with adding thenew modem for the PNMT.
-
8/11/2019 Install PNMT Win2000
5/32
ROI-S06553
- 3 -
(3) Check Dont detect my modem... and click [Next]to continue.
(4) Select Standard Modem Typesfrom the list of Manufacturersand Standard 19200bpsModemfrom the Models. Click [Next]to continue.
-
8/11/2019 Install PNMT Win2000
6/32
ROI-S06553
- 4 -
(5) Select Selected portsand COM1, then click [Next]to continue. If you are using amulti-port configuration, select All portsto install the standard 19200 bps modem driverfor all available COM ports.
(6) Click [Finish]to complete the new modem installation.
-
8/11/2019 Install PNMT Win2000
7/32
ROI-S06553
- 5 -
(7) Verify that Standard 19200 bps Modemand COM1are displayed. Click [OK].
-
8/11/2019 Install PNMT Win2000
8/32
ROI-S06553
- 6 -
3. Installation of USB Com Port Driver (USB Connection)
This section describes the installation of a USB Modem Driver (for PASOLINK-NEO networkelements) as the dial-up connection.
Connect the PNMT computer to the LCT Port of the NE with a standard USB cable.
(1) Click [Next] to continue.
(2) Select Search for a suitable driver for my device [recommended]and click [Next] tocontinue.
-
8/11/2019 Install PNMT Win2000
9/32
ROI-S06553
- 7 -
(3) Insert the USB driver CD-ROM in the computers disk drive and check CD-ROM drivesthen,click [Next].
(4) Click [Yes]in the Hardware Installation pop-up alert, and then USB Modem DriverInstallation starts.
-
8/11/2019 Install PNMT Win2000
10/32
ROI-S06553
- 8 -
(5) USB Com Port Driver installation is complete. Click [Finish].
-
8/11/2019 Install PNMT Win2000
11/32
ROI-S06553
- 9 -
4. Dial-up Setting
(1) Click Start | Settings | Control Panel, and then in the Control Panel window, click theNetwork and Dial-up Connectionsicon to start configuring the Dial-up Setting.
(2) The Network and Dial-up Connectionswindow will appear. Click Make NewConnection..
-
8/11/2019 Install PNMT Win2000
12/32
ROI-S06553
- 10 -
(3) Click [Next]to continue.
(4) Select Dial-up to private networkand click [Next]to continue.
-
8/11/2019 Install PNMT Win2000
13/32
ROI-S06553
- 11 -
(5) Select Modem-Choose a connected port, and click [Next]to continue.
NOTE
This screen appears only when a USB Modem Driver has been
installed.
In case of connecting with RS232C-Check Modem-Standard 19200 bps Modem[COM1].
In case of connecting with USB-Check Modem-USB Modem Driver[COM3].
-
8/11/2019 Install PNMT Win2000
14/32
ROI-S06553
- 12 -
(6) Enter any desired number in the Phone numberfield. Click [Next] to continue.
(7) Verify that For all usersis checked. Click [Next] to continue.
-
8/11/2019 Install PNMT Win2000
15/32
ROI-S06553
- 13 -
(8) In the Network Connection Wizard window,input connection name into Editbox.
Click [Finish].
In case of connecting with RS232C-Type [PNMT(RS232C)]
In case of connecting with USB-Type [PNMT(USB)]
-
8/11/2019 Install PNMT Win2000
16/32
ROI-S06553
- 14 -
(9) Click [Cancel]in the Connect PNMTdial-up connection window to continue. Next clickPropertieswindow.
(10) In the Propertieswindow, click on the Generaltab .Click Configure to proceed.
RS232C setting USB setting
-
8/11/2019 Install PNMT Win2000
17/32
ROI-S06553
- 15 -
(11) In theModem Configurationwindow, uncheck all boxes in the Hardware features andInitialization fields.
RS232C setting USB setting
(12) Retain the default setting displayed on the Optiontab, and click the Securitytab.
RS232C setting USB setting
-
8/11/2019 Install PNMT Win2000
18/32
ROI-S06553
- 16 -
(13) Retain the default setting displayed on the Securitytab and click the Networkingtab.
RS232C setting USB setting
(14) Verify that PPP:is displayed in the Type of dial-up server I am callingfield, and that Fileand Printer...and Client for Microsoft... are unchecked on the Networking tab.
RS232C setting USB setting
-
8/11/2019 Install PNMT Win2000
19/32
ROI-S06553
- 17 -
(15) Click Settings. Uncheck all boxes so that the window will look exactly as shown below.Click [OK]to go back to the previous window. Highlight Internet Protocol (TCP/IP) andthen clickProperties.
(16) Verify that both Obtain an IP address automaticallyand Obtain DNS server addressautomatically are selected.
-
8/11/2019 Install PNMT Win2000
20/32
ROI-S06553
- 18 -
(17) In the Advanced TCP/IP Settingswindow, uncheck Use IP header compressionin thePPP link field on the Generaltab. Click [OK].
-
8/11/2019 Install PNMT Win2000
21/32
ROI-S06553
- 19 -
5. SNMP Service Setting
NOTE
It is necessary to remove SNMP Service or to stop it if it has
already been installed.
To Remove SNMP Service:
(1) Select Start Setting Control Panel, then in the Add/Remove Programswindow,click Add/Remove Windows Components.
(2) The Windows Components Wizardwindow appears. Remove the check fromManagement and Monitoring Toolsand click Details...
-
8/11/2019 Install PNMT Win2000
22/32
ROI-S06553
- 20 -
(3) The Management and Monitoring Toolswindow appears. Confirm that Simple NetworkManagement Protocolis not checked and click [OK]. Return to above window and click[Next].
(4) Click [Finish]to complete the removal of SNMP Service.
-
8/11/2019 Install PNMT Win2000
23/32
ROI-S06553
- 21 -
To Stop SNMP Service:
(5) To stop SNMP Service without removing it, click Administrative Toolsin the ControlPanelwindow.
(6) Click Services in the Administrative Toolswindow.
-
8/11/2019 Install PNMT Win2000
24/32
ROI-S06553
- 22 -
(7) Confirm that SNMP Service is installed and that it has started automatically. Select ActionPropertieson the menu bar of the Serviceswindow, or right-click SNMP Serviceandthen click Propertiesin the SNMP Servicemenu.
(8) Select Manualin the Startup typefield and click Stopin the Service statusfield on theGeneraltab. Click [OK]or [Apply].
-
8/11/2019 Install PNMT Win2000
25/32
ROI-S06553
- 23 -
(9) Confirm that the Status of both SNMP Service and SNMP Trap Service is stopped, and thatthe Startup condition for each one is Manual.
(10) Restart the computer.
-
8/11/2019 Install PNMT Win2000
26/32
ROI-S06553
- 24 -
6. PNMT Setup
NOTE
If PNMT software has already been installed, please uninstall
it before you install a new version.
(1) Insert the PNMT Installation CDROM. Open the CDROM folder and double-clickinstall.exe.
(2) The following window appears until loading is completed.
-
8/11/2019 Install PNMT Win2000
27/32
ROI-S06553
- 25 -
(3) Introduction window appears. Click [Next]
(4) Specify the directory where the PNMT is to be installed. Click [Next].
Restore Default Folder:Click this button to revert to default folder
Choose:Click this button to select another directory
NOTE
The default path is C:\PNMTj. It is not possible to include
blank spaces as in Program Files. (Cdenotes thedirectory where the currently running OS is installed)
-
8/11/2019 Install PNMT Win2000
28/32
ROI-S06553
- 26 -
(5) Specify the License Key file if one is available. Click [Next].
Restore Default Folder:Click this button to revert to default folder
Choose:Click this button to choose the license key folder
NOTE
If no License Key file is available, operation in the Trial
mode is possible.
IMPORTANT: IMMEDIATE IMPORT OF LICENSE
You may use the PNMT on a trial basis for 30 days. Afterthat the PNMT can ONLY be used IF the license has been
imported (activated). To obtain the license please contactNEC.
-
8/11/2019 Install PNMT Win2000
29/32
ROI-S06553
- 27 -
(6) Click [Install].
(7) During installation, this window appears.
-
8/11/2019 Install PNMT Win2000
30/32
ROI-S06553
- 28 -
(8) Click [Done]to close the PNMT installation wizard.
-
8/11/2019 Install PNMT Win2000
31/32
ROI-S06553
- 29 -
7. Launching PNMT
(1) Click Start | Programs | PNMTj | PNMTto start the application.
(2) Enter User nameand Passwordand select ConnectionEntry:
After installation of PNMT, the initial / default password will be:-.
User name: adminPassword: (There is no initial password . Just press Enter.
A password can then be set.)Connection
: SelectDialup
andPNMT(RS232C)/PNMT(USB)
entry.
-
8/11/2019 Install PNMT Win2000
32/32
ROI-S06553
NOTE
If another application is using the SNMP Port, applicationinitialization will not be possible; the application will shutdown, and the following message will appear.