1

Install & Set 3M QS1000 - MK2 AT9000 Passport Reader Driver

Virgo Technical Support team welcomes all inquiries and is ready to

provide free technical support to install and set the reader, through

direct access to technical support:

https://goo.gl/LHzPd2

Define the electronic reader within the computer:

Download the file from the link below if windows 64bit

http://downloads.idscan.net/3M%20Page%20Reader%20SDK%20x64%203.3.3.10%20Setup.exe

Or download the file from the link below if windows 32bit

http://downloads.idscan.net/3M%20Page%20Reader%20SDK%203.3.3.10%20Setup.exe

then the application Run as administrator

2

Follow the steps below

3

4

5

6

7

8

9

10

From start menu, we write 3M and choose 3M Reader Expo

11

As shown below screen

We go to path D:\Virgo\VirgoOffline1438,create folder and name it Data

12

Then right click folder Data and choose properties

13

From tap Security choose your user and click Edit, give your user the permission for authenticated user is Full control and click OK

14

From 3M Reader Expo screen choose Change Save Directory from Image menu, and choose folder Data then click Open

15

From Image menu choose Image Encoding > JPEG, and check Save All

16

From Scheme menu we choose for example QS1000 then click Select

then from tap Selected Panels we need to following options:

- Document Summary

- ePassport : when exist RFID but in QS1000 not exist, so not check option.

- IR Image

- Machine Readable Zone

- Visible Image

17

Then click Save Changes and click Select

When this becomes the reader state is Enabled as shown below screen

18

Try now read a passport, we will find that it's read as shown following screen

19

Note: If the RFID chip image isn't read, we make sure the Capture minimal RF data, using DG1 and DG2 option is activated on tap Scheme Options.

20

we read the passport, we find that the slide image RFID is got as shown in the following screen

21

Finally, we go to the System settings Virgo Offline from Other menu

from tap General choose Reader Path D:\Virgo\VirgoOffline1438\Data and Passport Reader type is 3M Full Page also, we choose External Reader Application then click OK

22