installation and service manual...tool 3,4 4 5 6 ok yes no no drive over 2,500kg. at max. 50km/h. 1...
TRANSCRIPT
![Page 1: INSTALLATION AND SERVICE MANUAL...TOOL 3,4 4 5 6 OK YES NO NO Drive over 2,500kg. at max. 50km/h. 1 2 3 Cable OD Min 6mm. Max 12mm. EMBOSS FRAME KI-60731 FLAT FRAME KI-60741 6 20 30](https://reader034.vdocuments.net/reader034/viewer/2022042107/5e874f2c23a2b6379c679ae4/html5/thumbnails/1.jpg)
TOOL
3,4
4 5 6
OKYES
NO
NO
Drive over 2,500kg. at max. 50km/h.
1 2 3
Cable ODMin 6mm.Max 12mm.
EMBOSS FRAME KI-60731
FLAT FRAME KI-60741
6
20 30
CABLE SIZE : 3x1.0mm ²
Ta 25°cGlass surface tempKI-60731 = 45.0°c
Ta 25°cGlass surface tempKI-60741 = 45.0°c
IP67 IK10 CLASS I 0.5m
INSTALLATION AND SERVICE MANUAL
Product drawing (dimensions)
For Installation of Kios Inground uplight round dia. 220mm. and dia. 216mm. LED.Model. KI-60731 and KI-60741
L i g m a n L i g h t i n gTechnical amendments and modifications techniques reserved.
■ LIGMAN standard products are supplied with the control gear 220-240V 50/60Hz. The control gear for other voltages and frequencies is available upon request, please consult us for more details.■ LIGMAN luminaires are designed to conform IEC 60598 2-13 standard.
FM-TS-13-1/13-03-2561/REV.4M KI-60731/03/09/16/REV.2
1/2
Europe HeadquartersLigman Europe s.r.o.VGP Park Usti nad Labem, P 2Prestanov 113403 17 PrestanovCzech RepublicTel. +420 608 740 504 | [email protected]
www.ligman.com
Ligman LtdRegus House, Victory WayCrossways Business ParkDartford DA2 6QDTel. 0800 975 [email protected]
Thailand HeadquartersLigman Lighting Co., Ltd.17/2 Moo 4, Monthong, BangnampreawChachoengsao 24150 ThailandTel : +66 (2) [email protected]
![Page 2: INSTALLATION AND SERVICE MANUAL...TOOL 3,4 4 5 6 OK YES NO NO Drive over 2,500kg. at max. 50km/h. 1 2 3 Cable OD Min 6mm. Max 12mm. EMBOSS FRAME KI-60731 FLAT FRAME KI-60741 6 20 30](https://reader034.vdocuments.net/reader034/viewer/2022042107/5e874f2c23a2b6379c679ae4/html5/thumbnails/2.jpg)
LN 7 8 9
10 11 12
13 14 15
16 17 18
ROTATE 360 ˚
10 ˚
5 ˚
0 ˚
LAMP POSITION ADJUSTABLE0 ˚ or 5˚ or 10 ˚
SEE MARKPOINT
Note : Brush finish stainless steel products requirement to wipe the product periodically with a light oil (WD40 or equivalent) to remove any staining.
Torque:3.75Nm. Torque :3.0Nm.
Torque :4.3Nm.
Torque :2.0Nm.
Torque :1.0Nm.
Torque :4.3Nm.
Push
PULL THE LAMPAND ROTATE
M KI-60731/03/09/16/REV.22/2