installation instructions for drywall flange kit
TRANSCRIPT
DuoT1 Installation Instructions for Drywall Flange Kit
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING.RISK OF FIRE AND ELECTRICAL SHOCK. FIXTURE MUST BE INSTALLEDBY A QUALIFIED ELECTRICIAN. ALL INSTALLS SHOULD BE IN ACCORDANCE WITH NATIONAL, LOCAL BUILDING AND ELECTIRCALCODES. ALL WIRES AND MATERIALS USED FOR INPUT/OUTPUTMUST BE UL APPROVED.
Opening DimensionsProduct Opening Length (X) Opening Width (Y)
DuoT1-2FADuoT1-4FADuoT1-6FADuoT1-8FA
25”49”73”97”
6.9”6.9”6.9”6.9”
Installation Steps
Designed and Manufactured in the USAwww.aronlighting.com
Page 1
1 Cut hole in ceiling according to measurements in table.
2 Insert Flange Kit into ceiling, fasten kit to wooden frameor hang kit using hanging wires. Ensure tight �t against ceiling.
3 Attach BX cable to access plate and connect wires.Fasten access plate back on to driver box.
4 Insert �xture into opening in �ange kit.
X
Y
Designed and Manufactured in the USAwww.aronlighting.com
Page 2
*These components are not supplied
5 Lower �xture onto drywall �ange kit and ensure itsits securely on the �anges.
6 Power on �xture.