installation instructions for your toyota 4runner …
TRANSCRIPT
6575.doc04/14/03
THANK YOU FOR SELECTING A HUSKY FLOOR LINERFROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take
the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats
before installing your new floor liner. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass
Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products
make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA4RUNNER SECOND SEAT FLOOR LINER
IF YOUR 4RUNNER IS EQUIPPED WITH THE FACTORY POWER SEAT OPTION, IT MAY BENECESSARY TO TRIM YOUR LINER TO AVOID INTERFERENCE WITH THE SEAT TRACKS. TODETERMINE IF TRIMMING IS NECESSARY, FIRST INSTALL YOUR LINER, POSITIONING IT INYOUR VEHICLE AS SHOWN ABOVE. TO EASE INSTALLATION, MOVE THE SEATS TO THEIR MOSTFORWARD POSITION BEFORE INSTALLING THE LINER. ONCE THE LINER IS IN PLACE, MOVE THESEATS SLOWLY BACK, CHECKING FOR INTERFERENCE WITH THE LINER. IF INTERFERENCEOCCURS, TRIM AWAY THE MATERIAL IN THE TWO LOWERED AREAS ON THE LINER AS SHOWNABOVE AND ALSO IN THE PHOTOS ON THE REVERSE SIDE OF THIS PAGE. TRIMMING IS EASILYDONE USING A UTILITY KNIFE OR HEAVY SHEARS.
FRONT OFVEHICLE