installation standard brihtness instructions · tpl-i-45-mch-8 tivotape 45˚ mounting channel with...
TRANSCRIPT
Step 3: Peel off 3M tape backing and apply Tivotape to clean, smooth, surface area.
5/16"
5/16"
1/8"
5/16"
3M tape
SUB 24VDC White LED TivoTape
8"
8"
2" 2" 2" 2"
Copyright © 2014 Tivoli 08.12.14 - Page 1 of 3
TIVOTAPE™ INDOOR SBSTANDARD BRIGHTNESS
7170400
INSTALLATION INSTRUCTIONS
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com • [email protected]
Option 2: Mounting ChannelMounting channels are recommended for most applications to create smooth flat adhesion surface and are used for different effects.Step 1: Measure and cut mounting channel from supplied 12 ft lengths to fit full length of each tube.Step 2: Attach mounting channel by applying screws (supplied by others) with countersink heads appropriate for mounting surface, ie: wood screws for wood.Step 3: Insert Tivotape into channel. Make neccessary electrical connections (fixtures are DC powered and wires are marked for polarity).
TPL-I-MCHAN-8 Mounting Channel
Please verify the contents of the packages!
Please read instructions entirely before starting installation.Be sure power is turned off before installing or modifying the system.Call Tivoli, LLC tech support with questions.Caution: Tivotape LED is designed to work with listed Class II 24V DC transformers only. Use of any other power source could cause damage, shorten the life of the fixture and may void the warranty.
Consult any and all applicable local and national codes for installation.Do not conceal or extend exposed conductors through a building wall as per local electrical code.Warning: With any luminaire for any application, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injuries.
Installation instructions:Option 1: Direct to surfaceUse in clean, smooth, surface applicationsStep 1: Identify TivotapeTM from supplied lengths to fit the area as marked.Step 2: Trim off excess length at cutoff zones.
TPL-I-45-MCH-8 Tivotape 45˚ Mounting Channel with optional TPL-I-MCHAN-8 Mounting Channel as cover. Best for 45˚ angle application
TPL-INF-C-CHAN-8 Infinity Mounting Channel for LED protection in tight spaces
TPL-AL-CHAN-6 AL Series Channel rigid, sturdy application, protects LEDs
TPL-AL-LENS-6 AL Series Lens
TPL-AL-CHAN-6 AL Series Channel
TPL-AL-MC Mounting Clip
TPL-AL-EC AL Series End Cap
18 ga clear wires (see pg 2
for End Preps options)
Field cuttable section
Page 2 of 3 - Copyright © 2014 Tivoli 08.12.14
TIVOTAPE™ INDOOR SBSTANDARD BRIGHTNESS7170400
INSTALLATION INSTRUCTIONS
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com • [email protected]
TPL-SB-3.0-I-LEAD-C Lead/Dead End 24” 2 conductor 18ga lead wire factory attached to one end of tape with field trimmable dead end at other. Sold per each.
TPL-SB-3.0-I-LEAD-D Lead/Lead 24” 2 conductor 18ga lead wire factory attached to both ends of tape. Sold per each.
TPL-SB-3.0-I-XEP Extra lead wire Additional factory attached lead wire to extend lengths of LEAD-C and LEAD-D up to 20 ft max. Sold per foot (not shipped as spooled wire).
TPL-SB-3.0-I-CONN 18ga butt connectors. Used to interconnect factory attached lead wires. Sold per each (2 ea required per connection).
MOUNTING ACCESSORIES
.395
.698
.505
.135
.395
.698
.505
.135
TPL-AL-CHAN-1-6 AL Series Aluminum Channel with Mounting Carrier Base and Domed Lens. Available in 6 ft standard lengths.TPL-AL-CHAN-1-EC1 End Cap with no holeTPL-AL-CHAN-1-EC2 End Cap with holeTPL-AL-CHAN-1-LNSC Lens, ClearTPL-AL-CHAN-1-LNSF Lens, FrostedTPL-AL-CHAN-1-LNSO Lens, Opal
TPL-AL-CHAN-2-6 AL Series 45°Aluminum Channel with Narrow Lens. Available in 6 ft standard lengths.TPL-AL-CHAN-2-MCLP Mounting ClipTPL-AL-CHAN-2-EC1 End Cap with no holeTPL-AL-CHAN-2-EC2 End Cap with holeTPL-AL-CHAN-2-LNSC Lens, ClearTPL-AL-CHAN-2-LNSF Lens, FrostedTPL-AL-CHAN-2-LNSO Lens, Opal
TPL-AL-CHAN-3-6 AL Series small square profile Aluminum Channel with Flush Lens. Available in 6 ft standard lengthsTPL-AL-CHAN-2-MCLP Mounting ClipTPL-AL-CHAN-3-EC1 End Cap with no holeTPL-AL-CHAN-3-EC2 End Cap with holeTPL-AL-CHAN-3-LNSC Lens, ClearTPL-AL-CHAN-3-LNSF Lens, FrostedTPL-AL-CHAN-3-LNSO Lens, Opal
TPL-AL-CHAN-4-6 AL Series Recessed Profile Aluminum Channel with Flush Lens. Available in 6 ft standard lengths.TPL-AL-CHAN-4-EC1 End Cap with no holeTPL-AL-CHAN-4-EC2 End Cap with holeTPL-AL-CHAN-4-LNSC Lens, ClearTPL-AL-CHAN-4-LNSF Lens, FrostedTPL-AL-CHAN-4-LNSO Lens, Opal
TPL-INF-C-CHAN-8 ClearTPL-INF-F-CHAN-8 FrostedInfinity Mounting Channel8’ standard lengths, two piece channel is recommended for uneven mounting surfaces or for adding protection from physical access. TPL-INF-EC Infinity Channel End Cap
TPL-I-45-MCH-8 Tivotape 45˚ Mounting Channel. White PVC in 8’ lengthTPL-I-MCHAN-8 Mounting Channel can be used as cover
3/4"
1/2"
5/16"
5/8" 5/8"
11/16"
5/16"
5/8”
3/4”5/8”
1/2”
7/16”
1/2”
7/16”
1/2”
TPL-I-MCHAN-8 Mounting ChannelClear Polycarbonate in 8’ lengths.Can be used as Tivotape Mounting Channel with tape mounted directly or with the TPL-I-45-MCH-8 Tivotape 45° Mounting Channel as a cover.
Copyright © 2014 Tivoli 08.12.14 - Page 3 of 3
TIVOTAPE™ INDOOR SBSTANDARD BRIGHTNESS
7170400
INSTALLATION INSTRUCTIONS
Tivoli, LLC • 15602 Mosher Ave, Tustin, CA 92780 • ph 714 957-6101 fx 714 427-3458 • www.tivolilighting.com • [email protected]
MTBFMean Time Between Failures (MTBF) for LEDs: While Tivoli utilizes LEDs provided by industry leading vendors, these are electrical components with calculated manufacturers mean time between failures (MTBF). MTBF is rated as the average point at which 1/2 of color LEDs will lose 50% of their original brightness. MTBF for White LEDs is based on when 1/2 are reduced to 70% of their original brightness.
Typically, LED product failures occur within fixture construction, interdependent component failure, or operation under adverse conditions. Tivoli operates LEDs at a derated current to insure that LED MTBF values are based on product fixture construction and real application standards.
Still, conditions such as excessive voltage, vibration, heat, and other adverse conditions may negatively effect the life of LEDs.
TIVOLI24V DCPOWERSUPPLY
Standard ULlisted J-Boxby Others
PrimaryWiring Input
Wiring from Transformer to
J-Box must be to Class II standards.
Refer to NEC and local code requirements.
Tivotape
RECOMMENDED POWER SUPPLIES
CAT NO APPLICATION PRIMARY AND SECONDARY
TOTAL WATTAGE / AMPERAGE PER BREAKER LISTING DIMENSIONS ELECTRONIC OR
AC MAGNETICDIMMABLE (Y OR N)
ADUL-120-1-4-24-D Indoor 90-305V AC / 24V DC 96W / 1X4A CULUS 10”W X 10”L X 4”D Electronic Y: F
ADUL-240-2-4-24-D 90-305V AC / 24V DC 192W / 2X4A CULUS 10”W X 10”L X 4”D Electronic Y: F
ADUL-320-3-4-24-D 90-305V AC / 24V DC 288W / 3X4A CULUS 10”W X 10”L X 4”D Electronic Y: F
JT-100-1-4-24-D 120V AC / 24V DC 96W / 1X4A CETLUS 4.25”W X 11.00”L X 4.00”D Magnetic Y: A, C, E & F
JTH-100-1-4-24-D 277V AC / 24V DC 96W / 1X4A CETLUS 4.25”W X 11.00”L X 4.00”D Magnetic Y: B, D & F
JT-300-3-4-24-D 120V AC / 24V DC 288W / 3X4A CETLUS 8.50”W X 16.00”L X 4.50”D Magnetic Y: A, C, E & F
JTH-300-3-4-24-D 277V AC / 24V DC 288W / 3X4A CETLUS 8.50”W X 16.00”L X 4.50”D Magnetic Y: B, D & F
MW-120-1-4-24-D 90-305V AC / 24V DC 96W / 1X4A UL/CE 8.66”W X 2.67”L X 1.53”D Electronic Y: F
DIMMERS
SELECTOR DIMMER TYPE CONTROL SIGNAL
INPUT VOLTAGE
OUTPUT VOLTAGE
MAX LOAD
BREAKER RATING DIMENSIONS
A N-600 AC Magnetic N/A 120V AC 120V AC 450W N/A Recessed Single Gang Box
B NH-600 AC Magnetic N/A 277V AC 277V AC 450W N/A Recessed Single Gang Box
C N-1000 AC Magnetic N/A 120V AC 120V AC 800W N/A Recessed Dual Gang Box
D NH-1000 AC Magnetic N/A 277V AC 277V AC 800W N/A Recessed Dual Gang Box
E N-1500 AC Magnetic N/A 120V AC 120V AC 1200W N/A Recessed Dual Gang Box
F DIM-OT-1-4-D Control Interface 0-10V DC 24V DC 24V DC 96W 4A* 7"L X 1½"W X ¾"H
*DIM-OT applications require 1 each DIM-OT per 4 amp circuit
DIM-OT is a full range control interface that receives dimming signal from various controllers (0-10V DC). Consult factory for more information.
PRODUCT SPECIFICATION GUIDELIGHT SOURCE
MAX. LEDS PER 4 AMP CIRCUIT
MAX CONTINUOUS RUN LENGTH*
All color temperatures 1,008 (28 ft) 22 ft*Max continuous run lengths based on 3.0A load.