Weatherfold 4s 50 & 100INSTBWS1 ADDENDUM REV B - APR 2016

Note: The following steps have been amended for the replacement of a new adjustable top pivot for BWS1-100.

BWS1-100H

Page 3

H type hinge shown

BODYHORIZONTALLYADJUSTS

LOCKINGSCREW

ADJUSTMENTCAM

BUTTON TO RELEASEBOLT TO VERTICALLYADJUST

Adjustable top pivot features

Adjustable top pivot and cover

OPTION A - Allows access to hangers through notch in track OPTION B - Allows access tohangers by removing track section

Track Preparation width)track and chanel cut to length ‘W’ (finished opening

Brio AustraliaP: +61 2 87186718W: E: brio.sales@allegion.com

brio.com.au

Brio UK P: +44 191 2291224W: E:

briouk.combrio.sales.uk@allegion.com

Brio USA P: +1 585 3195599W: E:

briousa.combrio.sales.usa@allegion.com

CUT TRACK56[2.21]

40[1.58] 56[2.21]

Use cover as a jig and align to edge of thetrack to drill 2 x Ø5.0[0.2] holes

40[1.58]

2 x Ø5[0.2]

COVER

ALIGN

COVER

PIVOT

MACHINE SCREWS

With the panels closed, loosen toppivot locking screw and adjust tocentralise door panels. Then lockoff top pivot and mark the positionof the bottom pivot

= =

PA

NEL

JA

MB

JA

MB

Mark theposition of the bottom pivot

MARK

Installing Hardware and Hanging Panels clean down inside of track and channelJA

MB

Viewed from outside, insert rollers through access notch in correct order

JAM

B

Fix top pivot into position withmachine screws supplied

JAM

B

MACHINESCREWS

Place bottom pivot in channel

Screws pass through assembly

SILL or CHANNEL14[0.55]

JAM

B

PIVOT BODY

Loosen locking screw and adjusttop pivot so that hinge is touchingthe jamb Lock off when in position.

JAM

B

HINGETOUCHINGJAMB

PA

NEL

ADJUST

Adjustment hinge pin locking mechanism applied to all hangers and top pivot

Open the panels and adjust the bottom pivot to the mark. Thentighten locking screws

CHANNEL

PANEL

PANELPANEL

JAM

B

ALIGNTOMARK

Adjust all hangers and top pivot until panels are parallel with 7mmgap between the track

7[0.28]

Page 8

Page 9

Loosen locking screws and adjustbottom pivot so that hinge is touching the jamb. Lock off when in position.

ADJUST

LOCKINGSCREWS

JAM

B

HINGETOUCHINGJAMB

TRACK

PANEL

PANEL

To adjust height, depress buttonand wind bolt. Bolt locks offautomatically on flats.

depressbutton

Close doors & fix cover into pivot to cover notch.

Now that the doors are in place, open doors and loosen locking screws.

Viewed frominside

CHANNEL JAMB

JA

MB TRACK

COVER