instruction 2010

7/28/2019 Instruction 2010

1/16

KREAXIONS (M) SDN. BHD.( Company No.: 771725-x)

Address: No. 34-1, Jalan Melaka Raya 32.

Taman Melaka Raya 1, 75000 Melaka.

Jason: 016-5008391 , Eric: 012-5053832, Chan: 012-4086894 & Terry: 016-3333079

Email: [email protected]

Each punches comes with 3 different attachment, guide to create 2 different borders and 2

different corners (4 different using one punch)

(Designed to be used with 120-200gsm card, normal A4 paper not encouraged.)

These punches are designed to create a continuous border trip as long as you want, makingcards and even home decorate you want

Picture show as above is punch itself

Include with the 3 different sets of guides

Sets are labelled as "A" "B" and "C" and each set contains 2 guides that clip together

Insert the guides labelled "A" for a border punch, the guides labelled "B" for a style of corner

and "C" guides for another different corner style

Guide labelled "A"

Step 1 Step2 Step3

Insert paper into the punch with Cover half of the first flower as above Continuous punch until

the guide A and begin to punch to punch for second flower completed a nice border

at border

A series of 4 in 1 punches are to create beautiful corners and borders

When punches are turned upside down

they do not fall over so your precision work is much easier to do


2/16

Guide labelled "B"Step1 Step2

~Insert corner of the paper by use the punch with ~This step is for all angle

the corner tool B and begin the punch at angle

Guide labelleld "C"Step1 Step2

~Insert corner of the paper by use the punch with ~This step is for all edge

the corner tool C and begin the punch angle

Without Guide ToolStep1 Step2 Step3

~Insert the paper by use the punch without ~Take a half of pattern (refer the line ~Continuous punch by repea

guides for border as above ) punch for second pattern step 2 until completed a bor

~Sample card completed by use the guide "A" , "B" and "C" and without guide

Plastic Square Help FrameStep1 Step2 Step3

~Put either one of the plastic square ~Draw the lines by follow the plastic ~Hold tight to the Circle Cutter

help frame on top of the paper square help frame and pull the paper to cut the circle


3/16

t the

der


4/16

Step 5

~Turn over the punch and put in the punch inside of the ~ Picture above show a sample card of the circle done

circle and follow the centre line to punch the pattern by using circle cutter n plastic square help frame

Star Help FrameStep 1 Step 2 Step 3

~Draw the star shape by using ~Put in the star corner and ~Sample star after done by using star help frame

star help frame then cut out punch with the guides A

Oval Help FrameStep 1 Step 2

~Use pencil mark all the points

cutter on the point B to cut from B1 to B2

Step 3 Step 4 Step 5

~Hold the circle cutter on the point C, ~Hold the circle cutter on the point D, ~Sample of oval done by

then pull the paper cut from point B2 to A1 then pull the paper cut from point A2 to B1 oval help frame

A1 to A2, using the same measurement and hold the circle

~Hold the circle cutter on point A, then pull the paper cut from

Step4

B

C

D

A1

A2 B1

B2

AB

C

D

A1

A2 B1

B2

A

B

C

D

A1

A2 B1

B2

A


5/16


6/16


7/16


8/16


9/16


10/16


11/16


12/16


13/16


14/16


15/16

Sample bookmarks & cards done by using 4 in 1 punchers.

~901 ~902 ~903 ~904 ~905

~906 ~909 ~910 ~911 ~912 ~913

~915 ~917 ~918 ~919 ~920

~921 ~922 ~923 ~924 ~302

~303 ~304 ~305 ~306 ~307

~601 ~602 ~603 ~604 ~606 ~609


16/16

instruction 2010

Documents