P5 and P10 Full Color LED Signs

INSTRUCTION MANUAL

Contents

1.1 Introduction

1.2 Specification

2.1 Main functions & features of LedshowTW

2.2 Installation

2.3 Screen Setup

2.3.1 Set Screen Parameter

2.3.1.1 Set Controller and Communication Mode

2.3.1.2 Set Scan Configuration

2.3.1.3 Set screen dimensions

2.3.2 Display parameter configuration

2.4 Interface

2.5 Menu

2.5.1 File Menu

2.5.2 Edit Menu

2.5.3 Language Menu

2.6 Tool Bar

2.7 Program Property

1.1 Introduction

Indoor LED signs are one of the best ways to achieve this especially in public places like supermarkets, retail

stores, nail & hair salons, bars and lounges, auto dealers, restaurants, real estate companies, etc. They are the

most effective marketing tools you can have for your business. The ability to announce any sale, special or

message at any time is a powerful means to capture the attention of the thousands of people who pass your

business every day.

Resolution of LED signs is commonly measured by pitch, which is the distance between each LED cluster, or

“pixel”. Our products are high resolution 5mm and 10mm full color LED signs and made in USA.

<FRONT VIEW

<SIDE VIEW

1.2 Specifications

Indoor Full Led color scrolling signs

Pixel Pitch (mm): 5mm or 10mm

Operating temperature: -20~+55′ (Celsius degree)

Storage temperature: -30~+55′ (Celsius degree)

Super Bright Moving Messages, Images, and Effects

Large view angle with high contrast ratio 4,000:1

Change Scroll Speed Faster, Slower, Still or Flashing

Displays Date, Time, Stopwatch & Countdown Clock

Temperature Display is Optional

Advertise 24 Hours a Day with Minimal Power Usage

Support multiple languages

Life-span (50% brightness): 100,000 hours

User Friendly Software: LedshowTW2014 or LedshowTW2015

Able to show text, graphics and animation

Simple Installation (no assembly Required)

Use the USB flash disk to change message, graphics, fast program and easy to use

Made in USA

Free 1 year Warranty and free tech support

2.1 Main functions & features of LedshowTW

LedshowTW software is specially designed for LED graphic & text controller

The most completed program management functions

The most powerful materials editor

The most efficient data communication

The most innovative colorful magic screen frame

The most active animation stunt selection

Cluster system management

Group management: mostly support 256 screens

Sending modes: group mode/save data to USB equipment

Program type: normal/overall situation/ real time /sharing/self-adapt program

Play mode: play one by one/fixed time play/timing play

Program quantity: mostly support 192 programs

Area quantity: mostly support 128 areas

Support multi-languages, words spacing and lines spacing can be adjusted

Support the editing and viewing of file (*.txtf)

Support the editing and viewing of picture(*.bmp, *.jpg,)

Support the editing and viewing of Excel and table(*.tbf)

Support the editing and viewing of Avi and Flash animation (*.fxts, *.gif, *.swf)

Support the automatic conversion of Word and Excel

Clock mode

Support multi-groups of calendar and clock areas, positive and negative timing

Support multi-groups of time zones, dials

Temperature sensors/humidity sensor/noise sensor supported

2.2 Installation

Insert the CD into computer

Double click on “LedshowTW2014(14.07.30.03)_ALL” or “LedshowTW2015(15.01.23.01)_All” file

Follow the instructions to finish installing LedshowTW2014 or LedshowTW2015

2.3 Screen Setup

2.3.1 Set Screen Parameter

Open software

Go to menu Setup: select “Set Screen Parameter”

Password: 168

2.3.1.1 Set Controller and Communication Mode

Select “Screen parameters” Tab

Controller:

Select “BX-5Q full-color Series”

Select “BX-5Q1+”

Communication Mode : select “USB storage device”

Click “Save”

2.3.1.2 Set Scan Configuration

Select “Scan Configuration” Tab

For P10 Led Signs

Check “1/8”

Select the first scan

Click “Save Scan”

For P5 Led Signs

Check “1/16”

Select the first scan

Click “Save Scan”

2.3.1.3 Set screen dimensions

Go back to “Screen Parameters “Tab

Screen width: Set the number of dots on the wide side, such as 96, 128,160, etc…

Screen height: Set the number of dots on the high side, such as 32, 48, 64, 80, etc...

Click “Save” and then “Close”

2.3.2 Display parameter configuration (skip this step if P5 Led Signs)

Go to menu “Setup”: select “Display parameter configuration”

Password: 168

Check “Brightness priority” in Display Mode

Select “93” in brightness efficiency

Click “Save” and then “Close”

2.4 Interface

2.5 Menu

The menu is composited with File, Edit, AutoFit, Setup, Common Commands, Advanced Configuration,

Language and Help.

2.5.1 File Menu

New Program file: used to create a specified screen program broadcasting documents

Open Program file: used to load an edit program,(prerequisite is the program has been saved)

Program file Save As: used to save the current broadcasting files

Project file export: Save the materials. Contents of program to “Documents" &"Project list"

automatically. It is to recover the data materials when there's something wrong with the software

Project file import: Import the data materials from “Documents",” Project list" to software. Importantly,

the PC software parameters should be the same with export file

Exit

2.5.2 Edit Menu

Add General Program: add a general program

Add Image /Text Zone: add an image/text area in the preview filed

Add Subtitle Zone: add subtitle area in the preview area

Add Animation Zone: add animation area in the preview area

Add Dial Zone: add dial area in the preview area

Add Date Time Zone: add date time zone area in the preview area

Add Timer Zone: add timer area in the preview area

Delete Zone: delete select object in the preview area.

2.5.3 Language Menu

This software supports 14 languages,

and default is English. You can

select the language as your

requirement.

2.6 Tool Bar

Click new : create program in current screen

Open : click the open button and select from the saved program file, the file must be in *.pj

Save : click the save button, pop up the “save as “ dialog, save the current program file ,the file

must be in *.pj

General program : click the program button, create a new program in the current screen, as showed in

2.6.1

Picture 2.6.1

Image& text : add a new image & text area in the current screen, as showed in 2.6.2

Picture 2.6.2

Subtitle : add a new subtitle in the current screen, as showed in 2.6.3

Picture 2.6.3

Animation : add a new animation area in the current screen, as showed in 2.6.4

Picture 2.6.4

Dial : add new dial area in the current screen, as showed in 2.6.5

Picture 2.6.5

Timing : add new timing area in the current screen, as showed in 2.6.6

Picture 2.6.6

Time : add new time area in the current screen, as showed in 2.6.7

Picture 2.6.7

Delete : delete program and the areas in the program

Brightness : adjust the brightness of current screen

Correction time : correct the time with controller chip

USB : export program to USB flash drive.

2.7 Program Property

After add a new program, select the current program, and set program property in the bottom of main interface,

as showed in 2.7

Picture 2.7

Program name: set current program name

Order Play: click this button to play program according to the program order, play times could be set

as well , maximum is 255 times

Time play: click this button to set the play time, maximum is 65535 seconds

Play aging: select it to set the start time and end time for the program

Play time: select to set detailed start time and end time for program play

Play Weekly: set the date for program play, could also set any day of a week, single or multiple

selections is OK.

Program border: set borders, could be single or multi-color. Borders speed and effects can be adjusted

Program background: support *.bmp, *.jpg, *.jpeg and *. txt format