instructions (continued) mini envelope favors …

1
• We R Mini Envelope Punch Board #30193341 or Regular Envelope Punch Board #30144425 • 2 qty. – 4 7/8” x 4 7/8” Black Cardstock • 1” x 2” Bright Green Cardstock for eyes • 1” x 1” White Cardstock for fangs • 1/4” Double Stick Tape #30013284 • Black Fine Tip Sharpie Marker #91029 • White pencil or marker • Pencil for drawing and tracing • Ruler • 3/4” Circle Punch #30028718 • Scissors • Tacky Glue #1360916 NOTE: For the Mini Envelope Punch Board, the finished size of the envelope fits a 2 1/2” x 3 1/2” card. If you are using the regular sized Envelope Punch Board, you will use paper size 5” x 5” and use the first measurement guide for a Gift Card (2” x 3 1/2”). 1. Following the manufacturer’s instructions, take the two 4 7/8” x 4 7/8” black cardstocks and use the We R Mini Envelope Punch Board to cut out two envelopes. 2. Take one envelope piece and place it in the portrait orientation in front of you. Use the pencil to draw the curved edge of a bat wing on one of the side flaps. Cut out the curved edges of the wing. 3. Use the cut-out piece from the first wing as a template and trace on the other wing and cut out. Measure down 1/2” from the top of the wings along the straight creased lines on each side. Snip and cut to the outside edge of the wings, as shown. MATERIALS & TOOLS INSTRUCTIONS MINI ENVELOPE FAVORS Halloween Bat 4. On the top flap, draw two small triangles along the crease line for the bat’s ears. Cut out leaving the triangles attached and remove the excess from the flap. Trim off the bottom flap, straight across the creased line. 7. Place the envelope behind the bat and tape together to create the favor pocket. 5. Using the 3/4” circle punch, make two bright green circles. Use the black marker to draw in pupils for eyes. Glue eyes to the main portion of the envelope, below the ears. Using the scrap of white cardstock, cut out two tiny curved triangles for fangs. You can use a white marker to draw in a mouth if you want. You can also add a little red ink to the tips of the fangs for “blood”. 8. Fill the pocket with treats or a gift card. You can add To/From and/or a message to the pocket side. 6. Take the second envelope piece and fold in the sides and bottom flaps. Tape up to make an envelope. Trim off the top flap. Add double stick tape on the side of the envelope with the folds. Not for re-sale. Property of HouseMart Ben Franklin Crafts ©2021 benfranklinhawaii.com INSTRUCTIONS (Continued)

Upload: others

Post on 26-Nov-2021

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: INSTRUCTIONS (Continued) MINI ENVELOPE FAVORS …

• We R Mini Envelope Punch Board #30193341 or Regular Envelope Punch Board #30144425• 2 qty. – 4 7/8” x 4 7/8” Black Cardstock • 1” x 2” Bright Green Cardstock for eyes• 1” x 1” White Cardstock for fangs• 1/4” Double Stick Tape #30013284• Black Fine Tip Sharpie Marker #91029• White pencil or marker• Pencil for drawing and tracing• Ruler• 3/4” Circle Punch #30028718• Scissors• Tacky Glue #1360916

NOTE: For the Mini Envelope Punch Board, the finished size of the envelope fits a2 1/2” x 3 1/2” card. If you are using the regular sized Envelope Punch Board, you will use paper size 5” x 5” and use the first measurement guide for a Gift Card (2” x 3 1/2”).

1. Following the manufacturer’s instructions, take the two 4 7/8” x 4 7/8” black cardstocks and use the We R Mini Envelope Punch Board to cut out two envelopes.

2. Take one envelope piece and place it in the portrait orientation in front of you.

Use the pencil to draw the curved edge of a bat wing on one of the side flaps. Cut out the curved edges of the wing.

3. Use the cut-out piece from the first wing as a template and trace on the other wing and cut out.

Measure down 1/2” from the top of the wings along the straight creased lines on each side. Snip and cut to the outside edge of the wings, as shown.

MATERIALS & TOOLS

INSTRUCTIONS

MINI ENVELOPE FAVORS Halloween Bat

4. On the top flap, draw two small triangles along the crease line for the bat’s ears. Cut out leaving the triangles attached and remove the excess from the flap.

Trim off the bottom flap, straight across the creased line.

7. Place the envelope behind the bat and tape together to create the favor pocket.

5. Using the 3/4” circle punch, make two bright green circles. Use the black marker to draw in pupils for eyes. Glue eyes to the main portion of the envelope, below the ears.

Using the scrap of white cardstock, cut out two tiny curved triangles for fangs. You can use a white marker to draw in a mouth if you want. You can also add a little red ink to the tips of the fangs for “blood”.

8. Fill the pocket with treats or a gift card. You can add To/From and/or a message to the pocket side.

6. Take the second envelope piece and fold in the sides and bottom flaps. Tape up to make an envelope.

Trim off the top flap.

Add double stick tape on the side of the envelope with the folds.

Not for re-sale. Property of HouseMart Ben Franklin Crafts ©2021

benfranklinhawaii.comMĀPUNAPUNA · PEARL CITY · MARKET CITY · ENCHANTED LAKE · KAHULUI · HILO

benfranklinhawaii.comPearl City Shopping Center • 850 Kamehameha Hwy., Pearl City, HI 96782 • (808) 455-1909

benfranklinhawaii.comMarket City Shopping Center • 2919 Kapiolani Blvd., Honolulu, HI 96826 • (808) 735-4211

benfranklinhawaii.comEnchanted Lake Shopping Center • 1020 Keolu Dr., Kailua, HI 96734 • (808) 261-4621

benfranklinhawaii.comMapunapuna • 2810 Pa’a St., Honolulu, HI 96819 • (808) 833-3800

benfranklinhawaii.comHilo • 333 Kilauea Ave., Suite 115, Hilo, HI 96720• (808) 935-0005

benfranklinhawaii.comKahului • 275 W. Kaahumanu Ave., Kahului, HI 96732 • (808) 877-3337

benfranklinhawaii.comLihue • 4100 Rice St., Lihue, HI 96766• (808) 245-4091

benfranklinhawaii.com

INSTRUCTIONS (Continued)