instructions for 3g-900i cellular game camera...photos are compressed to a smaller resolution to...
TRANSCRIPT
![Page 1: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/1.jpg)
CAMERA OVERVIEWI
Page 13G-900i Cellular Game Camera
Instructions for 3G-900iCellular Game Camera
THANK YOU for your purchase of the 3G-900i Cellular Game Camera. Please read this booklet before using the unit. If you should have any questions about this product or any other Moultrie product, please contact us using the information on the back of this booklet. Please register your camera at www.moultriefeeders.com/warranty.
INTERIOR VIEW
Light Sensor
LCD Display
Infrared LED Flash
OFF / SETUP / ON
OK/Select Button
Menu Button
Navigation Buttons
External Power Port Battery CompartmentUSB Port
SD Card SlotSIM Slot
Camera Lens
Motion Sensor
Important Battery lnformation- Only use Alkaline or Lithium batteries. We recommend the use of Energizer batteries.- Do not mix old and new batteries. Always replace ALL the batteries at the same time.- When the camera is not in use, please remove the batteries.
Moultrie Limited WarrantyThis product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the date of purchase for 1 year. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been found to be defective in original material or workmanship. Should you require in-warranty service, call our Customer Service Department. If your problem cannot be addressed over the telephone, we may need you to send us your defective product plus proof of purchase.
You must register your camera at www.moultriefeeders.com/warranty to activate your 1-year warranty.
TroubleshootingPlease visit www.moultriefeeders.com/contact-us for troubleshooting and helpful tips.
Returns and RepairsPlease visit http://www.moultriefeeders.com/return-policy and complete the form or our Service Department will gladly answer any questions you have. Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.
www.moultriefeeders.com
07142016 / MCG-13071
PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Calera, AL 35040
Status Indicator
Cellular InformationThis camera contains a HSPA+ cellular module to transmit pictures directly from the camera to your cellular phone and/or email address. It supports MMS/SMTP/E-mail via HSPA or GSM network. It supports four network bands: 850MHz, 900MHz, 1800MHz, and 1900MHz.
A SIM card from a compatible provider is required to transmit photos. Photos are transmitted via MMS or SMTP. Cellular charges will apply for sending photos and potentially receiving photos/emails. Video does not send via cellular network.
Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel photo is saved to the SD card for future viewing.
Cellular Antenna
FRONT VIEW
![Page 2: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/2.jpg)
Page 2 3G-900i Cellular Game Camera Page 233G-900i Cellular Game Camera
MOULTRIE ACCESSORIES (Sold Separately)O
Using the Moultrie Camera Power PanelPlace near the tree where the camera is mounted. Place for best exposure to sun. To attach to a tripod secure the power panel to the tripod angled upward for best exposure. Plug the power panel to the Power Panel Plug. This will extend the life of your camera in the field.
Note: Leave internal batteries in the cameraduring use. The Camera Power Panel needs 4 hours of sunlight to fully power the camera.
Using the Moultrie Battery BoxExtend the field life of your Moultrie camera with a long-lasting, rechargeable external power source. Place near the tree where the camera is mounted. Plug the Battery Box to the Power Panel Plug.This will extend the life of your camera in the field.
OFF / SETUP / ONAdditionally, a live view from the camera will be displayed on screen to show the area that will be captured in photos or videos.
MENU BUTTONThe Menu Button selects Camera Setup or Main Screen. When camera mode is selected, the LEFT and RIGHT buttons navigate through the menu options. The Menu Button is also used to wake-up the camera and turn on the display when the camera is in power saving (or sleep) mode.
OK, UP/DOWN and LEFT/RIGHT BUTTONSThe OK button selects the item to be changed. The UP/DOWN and LEFT/RIGHT buttons are used to step through and modify the menu options. Pressing the OK button again, selects the option indicated on the display. The OK button is also used to manually take a picture.
BATTERY COMPARTMENTThe camera is powered by twelve (12) AA alkaline or lithium batteries. Open camera to show the battery compartment. Follow engravings on battery compartment, taking care to note the correct polarity.
See Important Battery Information section on the back page of this manual.
SD CARD SLOTAccepts up to a 32GB SD card (Class 10) for photo and video storage.
NOTE: A Class 10 SD card must be installed for the camera to operate (sold separately).
USB PORTDownload still pictures and video onto your computer by connecting a micro-B to USB cable (not included) to the USB port. Also allows for attachment of Moultrie Field Modem MV1. Please visit www.moultriemodile.com for more information.
EXTERNAL POWER PORTAccepts the Moultrie PowerPanel, Moultrie AC Adapter or Moultrie Battery Box accessories (sold separately) only. Refer to www.moultriefeeders.com for more information.
NOTE: The use of any other power source will void your warranty and possibly harm your camera.
CAMERA OVERVIEW (cont.)A
Using the Universal Camera StakeSo useful you’ll wonder how you ever did without it, the Moultrie Universal Camera Stake lets you set up shop literally anywhere, no trees or poles required. A sturdy 3-prong base plants the stake securely in the ground, wherever you choose to place it—in brush, alongside trees or even amidst taller crops like corn.
![Page 3: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/3.jpg)
Page 33G-900i Cellular Game CameraPage 22 3G-900i Cellular Game Camera
There are a number of ways for you download and view the pictures, videos in the field or at another location.
Removing the SD CardTo remove the SD Memory Card, open the camera cover and push gently on the SD card and it will pop out slightlyallowing you to remove it. Load the SD card into the player or card reader to view or move stored images to another location.
ImportantMake sure that the camera is in the OFF position before removing SD card.
ln the Field
You can download the pictures, videos, and time lapse pictures with the aid of external devices. To download,use an external player or card reader that issupported by 12V DC or Mini USB Jack.
At Home
Remove the entire camera and transport to another location to download images. To connect the camera to a PC computer, turn the camera ON, press the MENU button once to change to SETUP Mode. Connect the USB cord (not included) between the USB out port and the PC computer. The computer will recognize the camera as a removable drive. The unit works with Windows XP/Vista/7 or Mac OS X 10.1 or higher. Copy the images and videos from the camera onto your PC for further editing or printing. When the USB cable is disconnected, the camera will go back to SETUP mode.
VIEWING YOUR IMAGES OFF THE CAMERAN
See the full line of Moultrie camera accessories at www.moultriefeeders.com
GeneralPHOTO RESOLUTION: 5 MP
VIDEO RESOLUTION: HD
VIDEO LENGTH: 3 SECONDS
CAMERA NAME: NONE
TEMPERATURE: FAHRENHEIT
INFOSTRIP: ON
MANAGED MEMORY: OFF
ERASE ALL IMAGES: NO
PROGRAM SECURITY CODE: NO
RESET TO FACTORY DEFAULTS: NO
UPGRADE FIRMWARE: NO
Capture ModeDEFAULT MODE: MOTION DETECT
RESET OPTIONS?: DO NOT RESET
DETECTION DELAY: 5 SECONDS
PIR SENSITIVITY: HIGH
MULTI-SHOT: 1 (OFF)
PHOTO OR VIDEO: PHOTO
Cellular Settings2G/3G SETTING: AUTO
CELLULAR PROVIDER: NONE
SEND MODE: OFF
SEND VIA: EMAIL
SEND TO: EMAIL
RECIPIENTS: NONE
UPLOAD RESOLUTION: LOW
REMOTE CONTROL: OFF
DEFAULT SETTINGS
![Page 4: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/4.jpg)
Page 4 3G-900i Cellular Game Camera Page 213G-900i Cellular Game Camera
Memory & StorageYour camera supports external SD memory cards ONLY and will accept up to a 32GB card (Class 10). Using large memory cards can slow the camera response. The camera cannot capture any photo or video without external memory. Please insert an SD memory card to operate camera. Estimates are based on the most common types of memory cards that can be purchased at electronic stores, office supply stores, or online. Estimates may vary based on camera settings or environmental conditions.
Important Always turn the unit off when inserting or removing an SD memory card to avoid damage and ensure that the camera properly updates the memory information.
Estimated transmit data usage
Specifications Operational Mode Motion Detect / Time Lapse / Motion + Time Lapse
Resolution 12.0 MP
Still Resolutions JPEG Low: 2048 x 1536, Med: 2560 x 1920 High: 3200 x 2400, Enhanced 3968 x 2976
Video Resolutions VGA 640 x 480, HD 1280 x 720
SD Memory Card Up to 32 GB SD card, Class 10 (not included)
Format JPEG - Still pictures, MOV - Video clips
Power Supply 12 AA Alkaline or Lithium batteries (not included)
Cellular 2G/3G (HSPA+)
CAMERA SPECIFICATIONSMQUICK START INSTRUCTIONSB
Use the steps below as a guide to quickly set up your camera so it will function using the factory default settings.
STEP 1Open camera cover. Install twelve (12) AA size alkaline or lithium batteries with polarities as indicated in the Battery Tray. Install your SIM and insert your SD card. We recommend that you erase the SD card (ERASE IMAGES) inside the camera before taking pictures. This will not only erase all images, but will also format your SD card for use in the camera.
STEP 2Insert SD Memory Card until you hear an audible click. Camera will not operate without SD Card.
STEP 3Mount camera in desired location using a mounting strap. NOTE: Camera must be attached to a stable object for motion detection to function properly. Mounting camera on an unstable structure may result in excess image captures with no subject (false triggers).
STEP 5 Close cover. The camera will operate using Default settings.
IMPORTANT: If using default settings, no cellular settings will be included and pictures WILL NOT transmit. Please refer to Sections I and J for cellular setup instructions.
STEP 4 Switch camera to ON. Aim camera using color view screen to determine target area. Walk in front of the camera at the desired distance and watch
Original Photo Resolution
Photo Quality: Normal Photo Quality: High
Photo Size Est. Data Size Photo Size Est. Data Size
12 MP 992 x 774 50 - 80K 2000 x 1500 ~200-400K
8 MP 800 x 600 40 - 60K 1600 x 1200 ~150-300K
5 MP 640 x 480 30 - 50K 1280 x 960 ~120-250K
TL (4:3) 640 x 480 30 - 50K 1280 x 960 ~120-250K
6 MP 768 x 432 30 - 50K 1536 x 864 ~120-200K
4 MP 640 x 360 30 - 50K 1280 x 720 ~120-200K
TL (16:9) 640 x 360 30 - 50K 1280 x 720 ~120-200K
Eyelet
Mounting Strap
Python™Cable Loop
![Page 5: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/5.jpg)
Page 53G-900i Cellular Game CameraPage 20 3G-900i Cellular Game Camera
You will see one of three status screen displays after you slide the Mode switch to the SETUP position and select the capture mode.
Capture Modes
Select your preferred capture mode according to your preferences. The capture modes are detailed below.
CAPTURE MODESC
Setting Date and TimePress the OK button. Use the Left/Right buttons to move from one value to the next and the Up/Down buttons to adjust each value. Press the OK button to lock in selections. When all your selections have been made, and the date and time has been set, press the Right button to move to the next option.
Setting Menu LanguagePress the OK button. Use the Up/Down buttons to select the language for the camera menu.
Press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
LANGUAGELTimelapse (TL) Settings
Timelapse mode allows you to select an interval for the camera to take pictures, and the hours during which the interval will take place.
For example: Settings a 60 minute interval with an ‘on time’ of 8am-8pm will result in your camera taking a picture every hour for the time alloted.
Motion + Time Lapse
The camera operates in Timelapse Mode during the programmed intervals and Motion Detect Mode for the remainder of the day.
CAPTURE MODE
X MOTION DETECT
TIMELAPSE
MOTION + TIMELAPSE
Motion Detect Settings
When the camera is set to Motion Detect Mode, the camera will take pictures or video when motion is detected, as often as your detection delay allows.
MOTION DETECT SETTINGS
DETECTION DELAY 6 Sec.
PIR SENS. High
MULTI-SHOT 1 (off)
PHOTO/VIDEO Photo
Reset Options 4
TIMELAPSE (TL) SETTINGS
INTERVAL 30 Sec.
PROGRAM 4
Reset Options 4
User can send text message commands to change the remote control modes as shown in the above table. HHMM means the wake up time for Once mode. For instance, #RT11130# means change the remote control mode to once a day and the Receive Time is 11:30am.
NOTE: Once the remote control is disabled, the camera will not accept any further text message commands.
User can send text message commands to change the Time Lapse setting. NNN stands for time lapse interval in minutes.. Only 001 to 060, and then multiple of 60 (i.e. in hours) are legible. The max interval time is 720 minutes (i.e. 12 hours). For instance, #TLS0530E2130I120# means Starting Time 5:30, End Time 21:30, Interval Time 120 minutes.
Command #SNAP# allows user to catch a snapshot from camera to send to the preset recipient phone number or email.
DATE & TIMEK
DATE & TIME
01 / 01 / 2016 22:17
DD/MM/YYYY 12 HR
3 4
LANGUAGE
X English
Deutsch
Français
Italiano
Español
Svenska
![Page 6: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/6.jpg)
Page 6 3G-900i Cellular Game Camera Page 193G-900i Cellular Game Camera
MAIN MENUSD
General Settings Menu
With General Settings selected from the Main Menu, press the Right button to show the current settings. Use the Up/Down arrows to select a setting to change, and press Right to view the available options. Press the Left button to return to the Main Menu. See page 11 for more information on General Settings.
Main Menu
When the camera is placed into Setup, press the “Menu” button to show the main menu options. Use the Up and Down buttons to navigate to the settings you wish to change, and the Right button to select.
MAIN MENU
CAPTURE MODE 4
MOTION DETECT SETTINGS 4
TIMELAPSE (TL) SETTINGS 4
GENERAL SETTINGS 4
CELLULAR SETTINGS 4
DATE & TIME 4
LANGUAGE 4
Motion Detect Menu
With Motion Detect Settings selected from the Main Menu, press the Right button to show the current settings for Motion Detect. Use the Up/Down arrows to select a setting to change, and press Right to view the available options. Press the Left button to return to the Main Menu.
Timelapse (TL) Menu
With Timelapse (TL) Mode selected from the Main Menu, press the Right button to show the current settings for Timelapse. Use the Up/Down arrows to select a setting to change, and press Right to view the available options. Press the Left button to return to the Main Menu.
Motion Detect + Timelapse Menu
With Motion + TL Mode selected from the Main Menu, press the Right button to show the Motion Detect + Timelapse menu. Press the Left button to return to the Main Menu.
NOTE: Options for Motion and Time Lapse can be set in their respective option menus.
MOTION DETECT SETTINGS
DETECTION DELAY 6 Sec.
PIR SENS. High
MULTI-SHOT 1 (off)
PHOTO/VIDEO Photo
Reset Options 4
TIMELAPSE (TL) SETTINGS
INTERVAL 30 Sec.
PROGRAM 4
Reset Options 4
Selecting Remote ControlThis feature allows the user to send a text message command to change certain settings:
Disable: turns off remote control.
24 Hour: to allow camera to receive text message command in 24 hour mode. Note: this mode consumes more power since the Cellular module will be on standby all the time for incoming SMS messages, turn it off or switch to Once mode (see below) when this mode is no longer needed.
Once: The cellular module will boot up automatically every day at the ‘Receive Time’ to check if there is any text message commands. After processing the text message command, the camera will send a confirmation text message to the sender phone number. If multiple commands are received, the camera will only process the last text message command if there is any command conflict. Note: Avoid sending multiple text message commands to camera in one day.
The camera will accept text message commands in the following protocols to change the Send Mode shown in the table:
HH means hour, MM means minute, NN or NNN mean Max Number. Taking “#SMC093030” for example, this command will change the Send Mode to “Custom” with receiving time at 9:30 and Max Num. 30.
RECIPIENT EMAIL
EMAIL 1 4
EMAIL 2 4
EMAIL 3 4
EMAIL 4 4
CELLULAR SETTINGS
Send Mode Text Message Command Protocol Example
Off #SMOFF# #SMOFF#
Instant #SMINNN# #SMI050#
Customized #SMCHHMMNN# #SMC093030#
Daily Report #SMDHHMM# #SMD1930#
Text Message Command Protocol Example
Change Remote Control Mode
Disable #RTOFF# #RTOFF#
24 Hour #RT24# #RT24#
Once #RT1HHMM# #RT11130#
Change Time Lapse Setting
Disable #TLD# #TLD#
Change interval time #TLNNNM# #TL060M#
Reset time lapse setting #TLSHHMMEHHMMINNN# #TLS0530E2130I120#
Change Sending Photo Resolution
To normal #PQN# #PQN#
To high #PQH# #PQH#
Featured command
Snapshot #SNAP# #SNAP#
Additional text message commands supported are:
![Page 7: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/7.jpg)
Page 73G-900i Cellular Game CameraPage 18 3G-900i Cellular Game Camera
SETTING MOTION DETECT OPTIONSE
Setting Detection DelayDetection Delay determines the number of minutes between pictures when an animal is detected and remains in range. Press the OK button. Use the Up/Down buttons to choose between (5-59 Sec, 1-30 Min.). Press OK to lock in your selection.
MOTION DETECT SETTINGS
PIR SENS.
X HighLow
PIR SensitivityPIR Sensitivity allows you to control as to how much movement and at what distance the camera will trigger. HIGH sensitivity will allow for more distance, but will make the camera slightly more susceptible to false triggers and is ideal for open areas such as fields and food plots. LOW sensitivity will shorten the distance but lower the chance of false triggers and is ideal for close range traps and deeply wooded areas. Press the OK button. Use the Up/Down buttons to choose between (HIGH or LOW). Press OK to lock in your selection, then press Left button to go to the next option.
MOTION DETECT SETTINGS
MULTI-SHOT
X 1 (off)3 (Trig)
3 (Burst)
Setting Multi-ShotPress the OK button. Use the Up/Down buttons to choose between settings. Choose how many pictures you would like captured in a sequence when the camera is triggered (1 or 3).
Available options are:
1 (OFF) - Single photo taken per event.
3 BURST - Three rapidly captured photos taken per event. All 3 photos are captured within one second.
NOTE: Burst mode is only capable of up to 4MP captures, regardless of your resolution setting.
3 TRIGGERED - Up to three photos are captured per event with an approximate one second delay between each capture. Each subsequent photo after the first requires an individual trigger. This allows for multiple potential image captures of the same event while reducing the chance of empty images if the subject moves out of the field of view after the first shot.
Press OK to lock in your selection, then press Left button to go to the next option.
MOTION DETECT SETTINGS
DETECTION DELAY
6 S
3 4
RECIPIENT PHONE
PHONE 1 4
PHONE 2 4
PHONE 3 4
PHONE 4 4
CELLULAR SETTINGSSelecting Recipient PhoneRecipients are which phone numbers the pictures are transmitted to, and allows 4 phone numbers.
Press the OK button to confirm the selection. Press the Right or Left button to return to the Network Setup screen.
Selecting Recipient EmailRecipients are which email addresses the pictures are transmitted to, and allows 4 addresses.
Press the OK button to confirm the selection. Press the Right or Left button to return to the Network Setup screen.
RECIPIENT EMAIL
EMAIL 1 4
EMAIL 2 4
EMAIL 3 4
EMAIL 4 4
CELLULAR SETTINGS
CELLULAR SETTINGS
UPLOAD RESOLUTION
X LOWHIGH
Selecting Upload ResolutionPress the OK button. Use the Up/Down buttons to choose between 2 image resolution settings for upload:
1. LOW - lower quality, but uses less data 2. HIGH - higher quality, but uses more data
Press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
![Page 8: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/8.jpg)
Page 173G-900i Cellular Game CameraPage 8 3G-900i Cellular Game Camera
Setting Photo or VideoPress the OK button. Use the Up/Down buttons to choose between Photo, Video or Both. Press OK to lock in your selection, then press Left button to go to the next option.
SETTING MOTION DETECT OPTIONS (cont.)E
MOTION DETECT SETTINGS
PHOTO/VIDEO
X PhotoVideo
Both
SETTING TIMELAPSE OPTIONSF
Interval Time SettingPress the OK button. Use the Up/Down buttons to choose between 20-59 Sec, 1-59 Min, 1-24 Hours. When your selection has been made, press the Left button to go to the next option.
TIMELAPSE (TL) SETTINGS
INTERVAL
30 S 3
4
Setting Program Wake upPress the OK button. Use the Up/Down buttons to choose between 24 different settings: any hour from MlDNlGHT to 11 PM. This will determine what time the camera will wake up during the program and begin its time lapse program. Pressing “V” will choose always on, and Pressing “X” will remove all current selections. Press save to lock in your changes, or cancel to remove them.
TL PROGRAM
0
6
12
18
1
7
13
19
2
8
14
20
3
9
15
21
4
10
16
22
5
11
17
23
V X Save Cancel
CELLULAR SETTINGS
SEND MODE
X OFFINSTANTCUSTOM
DAILY
Selecting Send ModePress the OK button. Use the Up/Down buttons to choose between 4 delivery time options for photo and video:
OFF: Turns off the cellular portion of the camera. No images will be transmitted
INSTANT: Sends a picture instantly upon capture
CUSTOM: Sends pictures at a user-defined time during the day
DAILY: Sends a Text Message at a user defined time. The text message report includes total picture/video numbers capturing during the past 24 hours, the battery level and the remaining SD Card storage space
Press the OK button to confirm the selection. Press the Right or Left button to return to the Network Setup screen.
CELLULAR SETTINGS
SEND VIA
X MMSEMAIL
Selecting Send ViaThe camera provides two solutions, i.e. MMS or SMTP, to send the pictures to the desired phone numbers and email addresses:
MMS: uses MMS cellular plan
If MMS is selected, pictures will be sent to the preset phone numbers (maximum 4 numbers allowed) and email addresses (maximum 4 addresses allowed) or both phone number and email address (use semicolon “;” between each phone number and email address).
SMTP: uses Data cellular plan
If SMTP is selected, pictures will be sent from one preset sending email address to one or multiple email addresses via HSPA network using the SIM card data plan.
Press the OK button to confirm the selection. Press the Right or Left button to return to the Network Setup screen.
CELLULAR SETTINGS
SEND TO
X PHONEEMAILBOTH
Selecting Send ToThis is to set the destination where the MMS/SMTP goes to.
Phone: pictures to phone numbers (maximum 4 numbers)
Email: pictures to email addresses (maximum 4 addresses)
Both: pictures to both phone numbers and email addresses.
NOTE: the ‘Both’ and ‘Phone’ options are only possible for MMS, not for SMTP. SMTP pictures can only be sent to email addresses (not phone numbers). Using more phone numbers and emails will result in more battery usage.
Press the OK button to confirm the selection. Press the Right or Left button to return to the Network Setup screen.
![Page 9: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/9.jpg)
Page 93G-900i Cellular Game CameraPage 16 3G-900i Cellular Game Camera
General SettingsFrom the Main Screen, use the Up/Down buttons to navigate to General Settings. Press the Right button to select.
TIMELAPSE (TL) MODE
RESET OPTIONS
X Do Not ResetFactory Defaults
Reset OptionsPress the OK button. Use the Up/Down buttons to choose between to reset your Timelapse options.
GENERAL SETTINGS
PHOTO RESOLUTION 5MP
VIDEO RESOLUTION HD
VIDEO LENGTH 8 Sec.
CAMERA NAME 4
TEMPERATURE UNITS ºF
INFOSTRIP OFF
MANAGED MEMORY OFF
ERASE ALL IMAGES NO
SECURITY CODE NO
FACTORY RESET NO
UPGRADE FIRMWARE NO
GENERAL SETTINGSG
GENERAL SETTINGS
PHOTO RESOLUTION
3MPX 5MP 8MP
12MP
Setting Photo ResolutionPress the OK button. Use the Up/Down buttons to choose between 4 image resolution settings. 1. 3MP 2. 5MP 3. 8MP 4. 12MPPress the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
GENERAL SETTINGS
VIDEO RESOLUTION
X HD VGA
Setting Video ResolutionPress the OK button. Use the Up/Down buttons to choose between 2 video quality settings.1. HD: 1280 x 7202. VGA: 640 x 480
Press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
CELLULAR SETTINGSJThis menu is for setting up the cellular network. Cellular setup can be accomplished either by using the Download Tool with a computer (for comprehensive settings) or by direct setup on camera (for quick and basic settings).
CELLULAR SETTINGS
NETWORK SETUP 4
SEND MODE OFF
SEND VIA MMS
SEND TO PHONE
RECIPIENT PHONE 4
RECIPIENT EMAIL 4
UPLOAD RESOULTION LOW
REMOTE CONTROL OFF
IMEI 4
DOWNLOAD TOOL 4
CELLULAR SETTINGS
NETWORK SETUP
2G/3G SETTING AUTO
COUNTRY 4
Network SetupPress the OK button. Use the Up/Down buttons to choose between 3 options for 2G/3G coverage:
1. AUTO2. 2G3. 3G
Press the OK button to confirm the selection. Press the Right or Left button to return to the Network Setup screen.
Use the Up/Down buttons to choose the Country setting and press the Right button to bring up the list of countries. Use the Up/Down buttons to choose the country where the camera will be used. Press the OK button to confirm the selection. Press the Right or Left button to return to the Network Setup screen.
CELLULAR SETTINGS
NETWORK SETUP
2G/3G SETTING AUTO
COUNTRY 4
![Page 10: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/10.jpg)
Page 10 3G-900i Cellular Game Camera Page 153G-900i Cellular Game Camera
Setting Camera Name Press the OK button. Use theUp/Down and Left/Right buttons to select an identity for your camera. For example, you can use a name or a location; the identity you wish to use is up to you. Select the on-screen SAVE button and then press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
Setting Video LengthPress the OK button. Use the Up/Down buttons to choose between video length settings (3 seconds - 5 minutes). Press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
GENERAL SETTINGS
VIDEO LENGTH
30 S
3 4
CAMERA NAME 0/11
A
K
U
B
L
V
C
M
W
D
N
X
E
O
Y
F
P
Z
G
Q
H
R
I
S
J
T
A/a 123 Save Cancel
del Space
GENERAL SETTINGS
TEMPERATURE UNITS
X ºFºC
Selecting Temperature UnitsThe temperature is imprinted on each photo and can be in degrees Fahrenheit or Celsius. To change the temperature units, press the Up/Down buttons to highlight the desired setting. Press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
Infostrip ActiveUse the Up/Down buttons to choose between:
YES - Camera Name, Time, etc, information will be imprinted at the bottom of the image/video as an infromation bar
NO - No information bar will be imprinted.
Press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
GENERAL SETTINGS
INFOSTRIP
ONX OFF
Managed MemorySelecting the ON option will cause the oldest files to be overwritten with new captures when the SD card reaches its capacity. With the OFF option selected, the camera will cease image capture once the SD card reaches capacity. Press the OK button to select. Press the Right or Left button to return to the General Settings screen.
GENERAL SETTINGS
MANAGED MEMORY
ONX OFF
H. Camera Name
• User can input a camera name in the form of 4 digits; the camera name will be shown on the right corner of time stamp of each picture taken.
NOTE: only 4 digits (0~9) are allowed, DO NOT use Space between digits.
I. PATH
• Click the “Save” button and a file named “SETUP.bin” will be generated in the designated location. Copy the “SETUP.bin” file onto the ROOT directory of a SD card (not in DCIM) and insert the SD card into the camera.
NOTE: Switch the camera to “SETUP” and after a few seconds, the camera will display “Update Success”.
![Page 11: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/11.jpg)
Page 14 3G-900i Cellular Game Camera Page 113G-900i Cellular Game Camera
Erase All ImagesPress the OK button. Use the Up/Down buttons to choose between:
Yes - erase all imagesNo - does not change stored images.
Press the OK button to select. Press the Right or Left button to return to the General Settings screen.
NOTE: This will also format your SD card for use in your camera.
GENERAL SETTINGS
ERASE ALL IMAGES
X NOYES
GENERAL SETTINGS
SECURITY CODE
0 0 0 0 0
Security Code Press the OK button. Use the Up/Down and Left/Right buttons to select a 5 digit security code for your camera. Press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
NOTE: Please remember your security code. If the code is lost, you can contact Moultrie customer support to reset the password (charges may apply). Also, use caution when navigating through the Security Code option as not to set a code by mistake. For no Security Code, the setting should remain as “00000”.
GENERAL SETTINGS
SECURITY CODE
X NOYES
Factory ResetUse the Up/Down buttons to choose whether or not to reset your camera to factory defaults. Press the OK button to confirm the selection. Press the Right or Left button to return to the General Settings screen.
GENERAL SETTINGS
FACTORY RESET
X NOYES
Upgrade Firmware The firmware version is displayed. Press Up/Down to choose setting:
YES - To upgrade firmware. NO - Keep current firmware.
NOTE: This operation should only be performed when prompted by a technician to do so.
GENERAL SETTINGS
UPGRADE FIRMWARE
X NOYES
D. Operator Parameter
• Select the manufacturer Pre-programmed country and operator information
• If your country/provider is not shown, choose “Other” and select the Custom Button
– Provide the operator information (this can be obtained through your cellular service provider).
T-Mobile Germany example shown:
E. Recipients
• Enter Phone/Email numbers as picture recipients
NOTE: Do not put a space after the semicolon.
F. Remote Control
• Disable: turns off remote control.
• 24 Hour: to allow camera to receive text message command in 24 hour mode.
NOTE: this mode consumes significantly more power.
• Once: Set desired time for camera to wake once per day and check for text commands
• Refer to Section J for remote control codes
G. Photo Quality
• Normal
• High
![Page 12: Instructions for 3G-900i Cellular Game Camera...Photos are compressed to a smaller resolution to transmit over the network, while the full megapixel ... When camera mode is selected,](https://reader034.vdocuments.net/reader034/viewer/2022042112/5e8e64ce8b2ea13c4546cdcd/html5/thumbnails/12.jpg)
Page 133G-900i Cellular Game CameraPage 12 3G-900i Cellular Game Camera
Using Download Tool to set up Cellular Network Settings
1. Insert a SD card and a SIM card into camera2. Access CELLULAR SETTINGS from Main Menu and select DOWNLOAD TOOL3. Select “YES” and press “OK” to download the “setup.zip” onto the SD card4. Use a computer to unzip the ZIP file, and then open “setup.exe” file
A. Send Mode
OFF: turns off the cellular function; camera functions without cellular functionality.
INSTANT: to send a picture instantly when the camera captures a picture. NOTE: The Max Num. cannot exceed 200 in Instant mode.
CUSTOM: to send the pictures at a user-defined time in one day. NOTE: The Max Num. cannot exceed 50 in Custom mode.
DAILY REPORT: Send a once daily SMS report with total pictures in the last 24 hours, battery level and remaining SD Card space.
CELLULAR SETUP - WITH COMPUTERI
Cellular setup can be accomplished either by using the Download Tool with a computer (for comprehensive settings) or by direct setup on camera (for quick and basic settings).
NOTE: Skip to the “CELLULAR SETUP - WITH CAMERA” section to setup cellular network if you want to avoid using a computer to setup.
B. Send Via
MMS: uses MMS cellular plan
SMTP: uses Data cellular plan
• If SMTP is selected, pictures will be sent from a preset sending email address
• Click the “Sending Email” button
• Complete the below form with your own information and click “OK to save”
NOTE: User can send email with SSL encryption (by choosing “Use SSL”)
C. Send To
Phone: pictures to phone numbers (maximum 4 numbers)
Email: pictures to email addresses (maximum 4 addresses)
Both: pictures to both phone numbers and email addresses.
NOTE: the ‘Both’ and ‘Phone’ options are only possible for MMS, not for SMTP.