integrated power assemblies (ipas)
TRANSCRIPT
Eaton CorporationCutler-Hammer business unit1000 Cherrington ParkwayMoon Township, PA 15108-4312USAtel: 1-800-525-2000www.cutler-hammer.eaton.com
© 2003 Eaton CorporationAll Rights ReservedPrinted in USAPublication No. BR02300001EFebruary 2003
Integrated Power Assemblies: Electro/CentersEPower and Industrial Control
In a Pre-Assembled System
Delivered Ready to Connect
Eaton’s Cutler-Hammer business is a worldwide leader providing customer-driven solutions. From power distribution and electrical control products toindustrial automation, the Cutler-Hammer business utilizes advanced productdevelopment, world-class manufacturing, and offers global engineering servicesand support. To learn more about Eaton’s innovative Cutler-Hammer products andsolutions call 1-800-525-2000, for engineering services call 1-800-498-2678, or visit www.cutler-hammer.eaton.com.
Eaton Corporation is a global $7.3 billion diversified industrial manufacturer thatis a leader in fluid power systems; electrical power quality, distribution and control; automotive engine air management and fuel economy; and intelligenttruck systems for fuel economy and safety. Eaton has 48,000 employees and sellsproducts in more than 50 countries. For more information, visit www.eaton.com.
Whether single unit, multi-story, manned or unmanned,
Cutler-Hammer IPAs can be constructed out of galvanized
steel, stainless steel, or aluminum and feature a rugged,
welded I-Beam base providing a solid foundation allowing
either slab or “raised on piers” installation. In addition to
Cutler-Hammer Electrical Switchgear, Motor Control Centers,
Breakers, Power Quality Devices, Operator Interfaces,
Computers, Software and Communications Systems —
IPAs contain equipment such as fire protection,
air conditioning and battery systems.
Cutler-HammerIntegrated Power Assemblies (IPAs)
are prefabricated metal enclosurescontaining Power and Industrial Control Products.
Cutler-Hammer Integrated Power Assemblies provide pre-engineered, power and industrial
control delivered in a rugged, prefabricated
metal building ready to go online upon
delivery. IPAs are also less costly than
a building constructed on-site.
Please review the enclosed
CD which contains an
informational film, as
well as other information
on the benefits of the
IPA and a link to the
IPA Internet site.
Integrated Power Assemblies (IPAs)
Faster and At Lower CostIn every industry, facilities managers must build new plants and add capacity at existingfacilities using fewer resources and in shortertime frames than ever before.
Completing construction projects quicklyrequires detailed coordination. From design and engineering to equipment purchase toinstallation and startup — precise organizationis critical.
Yet, there are challenges. Equipment must bedelivered on time. Weather cannot delay the project. And various construction trade personnelmust be rigorously scheduled and managed.
A Skilled PartnerDespite these challenges, you must completethe task with limited resources while simul-taneously maintaining existing processes and operations. It is a huge task.
You need a partner who can answer the questions raised by the demands of shorter time frames and lower costs.
That partner is Eaton’s Cutler-Hammer business— and the answer is the Integrated PowerAssembly (Electro/CenterE).
Pre-Engineered, Ready to
Go, Ready to ExpandThe Cutler-Hammer Integrated Power Assembly(IPA) is a prefabricated metal enclosure contain-ing Cutler-Hammer Power Distribution andIndustrial Control products.
In addition to Cutler-Hammer ElectricalSwitchgear, Motor Control Centers andCommunication Systems — IPAs contain otherauxiliary equipment necessary to complete thework scope — per specifications.
Cutler-Hammer IPAs reduce your engineeringload. Simply describe what you need and let the Cutler-Hammer business do the rest.
A design layout and detailed bill of materialtakes you from concept to the approval stage of a project quickly.
As part of the engineering process, the Cutler-Hammer value-added engineering provides recommendations designed to lower your costs,ease installation and simplify future expansion.
No Integration,
Easy InstallationOn-site coordination and installation problems are eliminated because all equipment is installed,tested and ready to use upon delivery. Simplyconnect line and load cables and you are online.
No need to juggle complex delivery schedules or coordinate multiple trade service crewsbecause the Cutler-Hammer business does it all for you. You not only save time needed to get new equipment up and running, but you have more time available to keep your facility’sday-to-day operations on track.
And, because IPAs arrive at your site fully com-pleted, you will never experience the weather-related delays and cost associated overruns thatoften plague on-site construction projects.
Rugged, Versatile
ConstructionWhether single unit, multi-story, manned orunmanned, Cutler-Hammer IPAs are constructedusing a rugged, welded I-Beam base providing a solid foundation for internally mounted components allowing either slab or “raised on piers” installation. The use of galvanizedsteel, stainless steel, or aluminum constructionprovides application flexibility for a wide varietyof site conditions.
Construction details are engineered to ensurethat both customer specifications and buildingcodes are met for each installation.
Lower Cost The IPA’s pre-engineering and prefabricationreduce overall project costs through:■ Coordinated single shipment
eliminating multiple on-site handling and storage expenses.
■ “One Stop” documentation.■ Timeline to completion reduced allowing
earlier start-up of facility/process revenue stream.
In fact, an IEEE study has demonstrated that anIPA costs considerably less to engineer, integrateand construct than a structure built on site.*
In addition, IPAs can be depreciated over a shorterequipment schedule than “brick-and-mortar”buildings adding tax advantage benefits. Butinstallation cost is only part of the story.
Single Source Responsible A Cutler-Hammer IPA makes your job easier. You have only one order to write, one set ofengineering documentation to review, one set of terms and conditions to understand, one shipment to receive, and one invoice to pay.
From installed equipment to wiring to downspoutsyou have only one supplier responsible to meetyour needs — Eaton’s Cutler-Hammer business.
The IPA AdvantageWe even have a value calculator to help youdetermine how much you’ll save. Contact yourCutler-Hammer sales engineer to see a demo, or use the disk enclosed.
Can you get a new building or add capacityfaster, at lower cost and with higher quality than ever before?
The answer is YES if it’s a value engineeredCutler-Hammer Integrated Power Assembly.
* IEEE paper No. PCIC-84-11 “Installation Economics:Onsite Construction Vs. Packaged Power Control Assemblies”indicated a 14% installed cost advantage using theElectro/Center concept.
Eaton CorporationCutler-Hammer business unit1000 Cherrington ParkwayMoon Township, PA 15108-4312USAtel: 1-800-525-2000www.cutler-hammer.eaton.com
© 2003 Eaton CorporationAll Rights ReservedPrinted in USAPublication No. BR02300001EFebruary 2003
Integrated Power Assemblies: Electro/CentersEPower and Industrial Control
In a Pre-Assembled System
Delivered Ready to Connect
Eaton’s Cutler-Hammer business is a worldwide leader providing customer-driven solutions. From power distribution and electrical control products toindustrial automation, the Cutler-Hammer business utilizes advanced productdevelopment, world-class manufacturing, and offers global engineering servicesand support. To learn more about Eaton’s innovative Cutler-Hammer products andsolutions call 1-800-525-2000, for engineering services call 1-800-498-2678, or visit www.cutler-hammer.eaton.com.
Eaton Corporation is a global $7.3 billion diversified industrial manufacturer thatis a leader in fluid power systems; electrical power quality, distribution and control; automotive engine air management and fuel economy; and intelligenttruck systems for fuel economy and safety. Eaton has 48,000 employees and sellsproducts in more than 50 countries. For more information, visit www.eaton.com.
Whether single unit, multi-story, manned or unmanned,
Cutler-Hammer IPAs can be constructed out of galvanized
steel, stainless steel, or aluminum and feature a rugged,
welded I-Beam base providing a solid foundation allowing
either slab or “raised on piers” installation. In addition to
Cutler-Hammer Electrical Switchgear, Motor Control Centers,
Breakers, Power Quality Devices, Operator Interfaces,
Computers, Software and Communications Systems —
IPAs contain equipment such as fire protection,
air conditioning and battery systems.
Cutler-HammerIntegrated Power Assemblies (IPAs)
are prefabricated metal enclosurescontaining Power and Industrial Control Products.
Cutler-Hammer Integrated Power Assemblies provide pre-engineered, power and industrial
control delivered in a rugged, prefabricated
metal building ready to go online upon
delivery. IPAs are also less costly than
a building constructed on-site.
Please review the enclosed
CD which contains an
informational film, as
well as other information
on the benefits of the
IPA and a link to the
IPA Internet site.
Integrated Power Assemblies (IPAs)
Eaton CorporationCutler-Hammer business unit1000 Cherrington ParkwayMoon Township, PA 15108-4312USAtel: 1-800-525-2000www.cutler-hammer.eaton.com
© 2003 Eaton CorporationAll Rights ReservedPrinted in USAPublication No. BR02300001EFebruary 2003
Integrated Power Assemblies: Electro/CentersEPower and Industrial Control
In a Pre-Assembled System
Delivered Ready to Connect
Eaton’s Cutler-Hammer business is a worldwide leader providing customer-driven solutions. From power distribution and electrical control products toindustrial automation, the Cutler-Hammer business utilizes advanced productdevelopment, world-class manufacturing, and offers global engineering servicesand support. To learn more about Eaton’s innovative Cutler-Hammer products andsolutions call 1-800-525-2000, for engineering services call 1-800-498-2678, or visit www.cutler-hammer.eaton.com.
Eaton Corporation is a global $7.3 billion diversified industrial manufacturer thatis a leader in fluid power systems; electrical power quality, distribution and control; automotive engine air management and fuel economy; and intelligenttruck systems for fuel economy and safety. Eaton has 48,000 employees and sellsproducts in more than 50 countries. For more information, visit www.eaton.com.
Whether single unit, multi-story, manned or unmanned,
Cutler-Hammer IPAs can be constructed out of galvanized
steel, stainless steel, or aluminum and feature a rugged,
welded I-Beam base providing a solid foundation allowing
either slab or “raised on piers” installation. In addition to
Cutler-Hammer Electrical Switchgear, Motor Control Centers,
Breakers, Power Quality Devices, Operator Interfaces,
Computers, Software and Communications Systems —
IPAs contain equipment such as fire protection,
air conditioning and battery systems.
Cutler-HammerIntegrated Power Assemblies (IPAs)
are prefabricated metal enclosurescontaining Power and Industrial Control Products.
Cutler-Hammer Integrated Power Assemblies provide pre-engineered, power and industrial
control delivered in a rugged, prefabricated
metal building ready to go online upon
delivery. IPAs are also less costly than
a building constructed on-site.
Please review the enclosed
CD which contains an
informational film, as
well as other information
on the benefits of the
IPA and a link to the
IPA Internet site.
Integrated Power Assemblies (IPAs)