integration 2g bts using netact_rnw
TRANSCRIPT
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 1/67
1 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
INTEGRATION 2G BTS USING NOKIA
NETACT
By
Gohar Hameed Khan
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 2/67
2 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Roll-Out Procedure
Installation
Commissioning
Integration
• the network elements areconfigured
• tested as stand-alone entities
• configure interconnection betweennetwork elements
• customising the radio networkparameters
• ready for commercial use• ready for calls (circuit and packet
switched)
• physical installation of antennas,racks, subracks
• Power connections
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 3/67
3 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Integration Process
Preparation for BTS site database (Creation)
Checking and Activation of Transmission Link
Unlocking The Site
Test Call
Checking Alarm
Locking The Site and Waiting for ATP
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 4/67
4 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Prerequisites
Ensure that the following tasks have been completed:
• The BTS site and transmission commissioning tasks have been completedbefore the BTS software is activated.
• The BSC that the BTS is connected to is integrated with the NetAct.
• The ET (Exchange Terminal) for the BTS site(s) is installed and configured
in the BSC.
• The BSC ET is in working state.
• The correct BTS software package is available either in the BSC or NetAct.
• If GPRS functionality is included, the software package must includesupport for GPRS.
• The name and identification numbers of the transmission objects areavailable.
• MSC parameters have been created.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 5/67
5 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Parameter Required
ü Parameter Entry Sheet (PES) for BTS new sites from Radio NetworkPlanning Engineer.
ü Parameter of A-bis Allocation Time Slot (LAPD-Link) and ET fromTransmission Planning Engineer.
ü BSC Transmission Capacity from Transmission Planning Engineer.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 6/67
6 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Preparation for BTS Site Database
(Creation)
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 7/67
7 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Preparation for BTS Site Database(Creation)
Start
Create LAPD linksMML Command Session
Create BCFRadio Network Manager
Create BTSRadio Network Manager
Create HOC and POCRadio Network Manager
Continue…
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 8/67
8 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Continue…
Create TRX(s)Radio Network Manager
Create ADCERadio Network Manager
Create ViewsNetwork Editor
End
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 9/67
9 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create LAPD Links
• The D-channels on Abis interface are the O & M signalling link (OMU link,OMUSIG) and the telecom signalling link (TRX link, TRXSIG).
• Check the BCSU for signaling capacity then find a suitable BCSU in thecorresponding BSC with signaling capacity available for the new link.
MML command for checking : ZEEI::BCSU;Example : Checking BCSU at BSC Baturaden
Z EEI::BCSU:;
DX 200 BATURADEN 2005-01-26 13:13:39
NUMBER OF CREATED TRXS, LINKS AND REAL TCHS UNDER BCSUS:
D-CHANNEL D-CHANNEL REALUNIT TRXS TELECOM LINKS O&M LINKS TCHS======== ====== ============= ========= ======BCSU-3 57 57 6 465BCSU-1 51 51 5 565BCSU-2 51 51 12 438BCSU-4 55 55 5 495
BCSU-5 55 55 5 507BCSU-0 51 51 5 439======== ====== ======TOTAL 320 2909
HARDWARE SUPPORTED MAXIMUM TRX CAPACITY : 660HW AND SW SUPPORTED MAXIMUM TRX CAPACITY: 660
COMMAND EXECUTED
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 10/67
10 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create LAPD Links
Create LAPD Link Using MML CommandZDSE:<D-channel link set name>:<unit type>,<unit index>:<service access pointidentifier>,<terminal end point identifier>:<bit rate>,<PCM-TSL of D-channel>;
Naming convention for LAPD link name (D-Channel link set name) :
For O & M signaling link (OMU link,OMUSIG) : OM<BCFid>
For telecom signaling link (TRX link,TRXSIG):T<BCFid><TRXid>
Where : BCFid = BCF number in 3 digit decimal format,
TRXid = TRX number in 1 digit hexadecimal format,
Unit Type : BCSU
Unit Index : BCSU index for the new l ink created
Service Access Point Identifier (SAPI) : For OMUSIG, SAPI =62, For TRXSIG, SAPI =0
Terminal End Point Identifier (TEI) : For OMUSIG, TEI =1, For TRXSIG, TEI= 1-12 ß CORRESPOND WITH TRX NUMBER
Example : If the BCF id =1, and PCM/ET ID = 98, configuration 3/3/3 TRX
ZDSE:OM001:BCSU,1:62,1:16,98-31,0;
ZDSE:T0011:BCSU,1:0,1:32,98-25,0;ZDSE:T0012:BCSU,1:0,2:32,98-25,4;ZDSE:T0013:BCSU,1,0,3:32,98-26,0;ZDSE:T0015:BCSU,1,0,5:32,98-27,0;ZDSE:T0016:BCSU,1,0,6:32,98-27,4;ZDSE:T0017:BCSU,1,0,7:32,98-28,0;ZDSE:T0019:BCSU,1,0,9:32,98-29,0;ZDSE:T001A:BCSU,1,0,10:32,98-29,4;ZDSE:T001B:BCSU,1,0,11:32,98-30,0;
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 11/67
11 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BCF
Creating a BCF is done by RNW Manager application.To create a BCF:
1. Open RNW Manager from Top Level User Interface ® Utils ® Network Configuration Mgmt ® RNW Manager
2. Expand the browser at the left until you see the BSC for this BCF
3. Highlight the BSC then press Select
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 12/67
12 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BCF
4. On the menu, click Add Child ®
Child by Object Class and choose BCF then press OK5. Fill in the Objects info in the Objects folder: identification of the BCF (BCF number), Name, Address, Maintenance Region
and coordinate of the BCF.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 13/67
13 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BCF
6. Go to the General folder and choose the correct LAPD link, BCF type and other parameters
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 14/67
14 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BCF
7. Fill in the necessary Outputs and Inputs (External Alarm) definition if needed.8. Once all parameters have been set, on the menu click File ® Send to Network to create the BCF in the
BSC.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 15/67
15 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
CREATING EXTERNAL ALARM SYSTEMUSING MML
ZEFX:001:INBR=1:ROU=ACT,POL=OPEN,:SEV=AL1,TID=1,:;ZEFX:001:INBR=2:ROU=ACT,POL=OPEN,:SEV=AL3,TID=2,:;
ZEFX:001:INBR=3:ROU=ACT,POL=OPEN,:SEV=AL1,TID=3,:;
ZEFX:001:INBR=4:ROU=ACT,POL=OPEN,:SEV=AL2,TID=4,:;
ZEFX:001:INBR=5:ROU=ACT,POL=OPEN,:SEV=AL3,TID=5,:;
ZEFX:001:INBR=6:ROU=ACT,POL=OPEN,:SEV=AL2,TID=6,:;ZEFX:001:INBR=7:ROU=ACT,POL=OPEN,:SEV=AL1,TID=7,:;
ZEFX:001:INBR=8:ROU=ACT,POL=OPEN,:SEV=AL3,TID=8,:;
ZEFX:001:INBR=9:ROU=ACT,POL=OPEN,:SEV=AL3,TID=9,:;
ZEFX:001:INBR=11:ROU=ACT,POL=OPEN,:SEV=AL3,TID=11,:;
ZEFX:001:INBR=12:ROU=ACT,POL=OPEN,:SEV=AL3,TID=12,:;
ZEFX:001:INBR=14:ROU=NOT,POL=OPEN,:SEV=AL3,TID=14,:;
ZEFX:001:INBR=15:ROU=NOT,POL=OPEN,:SEV=AL3,TID=15,:;
ZEFX:001:INBR=16:ROU=NOT,POL=OPEN,:SEV=AL3,TID=16,:;
BCFid in 3 Digit
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 16/67
16 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
EXTERNAL ALARM
• External alarm defined for indosat network is described as below :
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 17/67
17 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
ss gnmen o x erna arm or ra eBTS
Low Volt Battery
Main (PLN OFF)
Spare
Arrester Fail
Outdoor Unit AC
AVR Automatic Bypass
Major Rectifier
Temperature
ATS Fail
Genset Run
Fire
Door
Alarm Description
Major12
Critical11
-10
Minor9
Major8
Minor7
Major6
Major5
Minor4
Minor3
Critical2
Critical1
SeverityAL No.
Remarks:1. Cable pair no 1 – 6 to be used for external control output2. For Eltek Rectifier, the assignment of Eltek’s alarms are matched with the following description
• Load Fuse trip à alarm no 7. AVR Automatic bypass• Rectifier/Module Fail à Major Rectifier• Battery fuse trip : not connected at the moment
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 18/67
18 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BTSCreating a BTS is done by RNW Manager application.
To create a BTS:Open RNW Manager application if not opened yet from Top Level User Interface ® Utils ® Network Configuration Mgmt ® RNW Manager…
Expand the browser on the left for the destination BSC and the BCF where you need to create BTS to.
Highlight the BCF and press Select. Go to the Template and select the Template.
On the menu, click Add Child ® Child by Object Class then select BTS then press OK.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 19/67
19 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BTS5. Fill in the object information on the Objects folder: BTS id (number), Name, and Network Name.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 20/67
20 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BTS6. On the General folder, fill in the Cell id, MNC, MCC, LAC, RAC, NCC, BCC, Hopping Mode, GPRS parameters, Frequency Band in use and other
necessary parameters.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 21/67
21 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BTS7. On Additionals folder, Diversity used is chosen (“on”)
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 22/67
22 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create BTSOn Cell Access folder, fill in Rx Lev Access Min Rx Level and MS Tx Pwr Max CCH
The parameters at other folder (CCH & Interference, Quequeing & C2, etc) if necessary
Once all parameter is set, on the menu click Fi le ® Send to network to create the BTS.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 23/67
23 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create HOC and POCCreating HOC and POC are done by RNW Manager application.
To create a BTS:Open RNW Manager application if not opened yet from Top Level User Interface ® Utils ® Network Configuration Mgmt ® RNW Manager…
Expand the browser on the left for the destination BSC-BCF-BTS where you need to create HOC to Highlight the BTS and press Select. Go to the Template andselect the Template.
Highlight the BTS and press Select. Go to the Template and select the Template.
On the menu, click Add Child ® Child by object class then select HOC then press OK.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 24/67
24 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create HOC and POC
Fill in the object information on the Objects folder: HOC id (number).
Fill in also the necessary parameters in General, Averaging, etc folder.
Once all parameter is set, on the menu click Fi le ® Send to network to create the HOC.
Repeat the procedure from step 1-3 to create POC (but when click Add Child ® Child by object class then select POC then press OK. )
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 25/67
25 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create HOC and POC
Fill in the object information on the Objects folder: POC id (number).
Fill in also the necessary parameters in General, Averaging, etc folder.
Once all parameter is set, on the menu click Fi le ® Send to network to create the POC.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 26/67
26 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create TRXTRX(s) is done by RNW Manager application.
To create a TRX:Open RNW Manager application if not opened yet from Top Level User Interface ® Utils ® Network Configuration Mgmt ® RNW Manager…
Expand the browser on the left for the destination BSC-BCF-BTS where you need to create HOC
Highlight the BTS and press Select.
On the menu, click Add Child ® Child by object class then select TRX then press OK.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 27/67
27 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create TRX
5. Fill in the object information on the Objects folder: TRX id (number)
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 28/67
28 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create TRX
6. Fill in the General information: Initial Frequency, EDGE Availability, TSC (=BCC), GPRS Parameters, LAPD link and other required parameters.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 29/67
29 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create TRX
Fill in the PCM-TSL and channel type in the Channels folder
Fill in also the necessary parameters in other folders
Once all parameter is set, on the menu click Fi le ® Send to network to create the TRX
Repeat the procedure from step 2-9 to create other TRXs.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 30/67
30 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create ADCEADCE is done by RNW Manager application.
To create ADCE :Open RNW Manager application if not opened yet from Top Level User Interface ® Utils ® Network Configuration Mgmt ® RNW Manager…
Expand the browser on the left for the destination BSC-BCF-BTS where you need to create ADCE
Highlight the BTS and press Select.
On the browser, search the destination BTS by expanding the destination BSC-BCF until you see the target BTS
Highlight both source BTS and target BTS (Hint: press and hold CTRL button to select multiple objects)
On the menu, click Add Child ® Adjacent Cell if you need to create one-direction adjacency or select Multiple Adjacenct Cells for bi-directional adjacencies
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 31/67
31 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create ADCE7. If you only need to select one-directional adjacency, you can swap the source and target or create bi-directional adjacencies automatically
8. If you only choose to create one-direction adjacency, check and change the parameters before sending it to network by File ® Send to Network. Note:before sending to network, the Adjacency’s CI, LAC, BSIC and BCCH Frequency will be zero. It will be updated after sending to network.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 32/67
32 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create ADCE
8. If you only choose to create one-direction adjacency, check and change the parameters before sending it to network by File ® Send to Network. Note:before sending to network, the Adjacency’s CI, LAC, BSIC and BCCH Frequency will be zero. It will be updated after sending tonetwork. Change anynecessary parameters at the folders
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 33/67
33 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Create ADCE
9. When you create Multiple Adjacency (in step 6), the system will only ask for your confirmation to create multiple adjacenciesand then sendto network automatically. This will create incoming and outgoing adjacencies.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 34/67
34 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Checking and Activation
Transmission Link
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 35/67
35 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Checking and Activation Transmission Link
Start
Checking ET (Exchange Terminal)MML Command Session
Activate the ETMML Command Session
Checking D-ChannelMML Command Session
Activate the D-ChannelMML Command Session
End
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 36/67
36 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Checking ET (Exchange Terminal)
Checking the state of ET using MML command sessionZUSI: INTERROGATE UNIT STATE
USI:[<unit type> | ALL def], [<unit index>... |
<unit group>..., <unit index>... |<all> def]:
[<configuration> | <own side> def]:
[<name of remote station> | <all remote units within given type> def];
Example : Checking PCM/ET ID = 98
BASE STATION CONTROLLER HANDLING COMMAND <EE_>
< ZUSI:ET,61;
LOADING PROGRAM VERSION 19.10-1
EXECUTION STARTED
DX 200 BATURADEN 2005-02-28 15:55:58
WORKING STATE OF UNITS
UNIT PHYS STATE LOCATION INFO
ET-61 WO-EX 1A005-00 BCSU-0 -
TOTAL OF 1 UNITS
COMMAND EXECUTED
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 37/67
37 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Activate The ET
Working State : SE - NH (Separate No Hardware) --> initial condition
SE - OU
TE - EX
WO – EX (Working Execute)
Activate the ET using MML command session
ZUSC: CHANGE UNIT STATE
USC:<unit type>, [<unit index> | <unit group>, <unit index> ]:
<working state>, [FCD | <controlled transition> def]:
[C= (<code load mode> | OPT def )| F= (<file load mode> | VIRT def) ]...;
Example : Activae PCM/ET ID = 98USC:ET,98 :WO,FCD;
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 38/67
38 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Checking D-Channel
Checking the state D-Channel using MML command sessionThere are 2 command used :
DTI: INTERROGATE D-CHANNEL WORKING STATEUse this command to interrogate the working states of the D-channels in a D-channel link set.
DTI:[[NAME=<D-channel link set name> | <all> def] |
[NUMBER=<D-channel link set number> | <all> def]]:
[[<unit type> | <all> def], [<unit index> | <all> def]]:
[[SAPI=<service access point identifier> | <all> def] |
[PCM=<external PCM of D-channel> | <all> def]]:
[<D-channel working state> | <all> def];
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 39/67
39 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Checking D-Channel
Example : Checking D-Channel at ET/PCM=61< ZDTI:::PCM=61;
LOADING PROGRAM VERSION 8.12-0
DX 200 BATURADEN 2005-02-28 15:58:18
INTERROGATING D-CHANNEL WORKING STATE
INTERFACE EXT SUB WORKING
NAME NUM UNIT SIDE PCM-TSL-TSL SAPI STATE
----- --- ------ --------- ----------- ---- -------
OM001 15 BCSU-0 NETW 61-31-00 62 WO-EX
T0011 16 BCSU-0 NETW 61-25-00 0 WO-EX
T0012 17 BCSU-0 NETW 61-25-04 0 WO-EX
T0013 18 BCSU-0 NETW 61-26-00 0 WO-EX
T0014 19 BCSU-0 NETW 61-26-04 0 WO-EX
T0015 20 BCSU-0 NETW 61-27-00 0 WO-EX
T0016 21 BCSU-0 NETW 61-27-04 0 WO-EX
T0017 22 BCSU-0 NETW 61-28-00 0 WO-EX
T0018 23 BCSU-0 NETW 61-28-04 0 WO-EX
T0019 24 BCSU-0 NETW 61-29-00 0 WO-EX
T001A 25 BCSU-0 NETW 61-29-04 0 WO-EX
T001B 26 BCSU-0 NETW 61-30-00 0 WO-EX
T001C 27 BCSU-0 NETW 61-30-04 0 WO-EX
COMMAND EXECUTED
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 40/67
40 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Checking D-Channel
ZDSB: INTERROGATE BASE STATION CONTROLLER D-CHANNELDATAUse this command to interrogate the data on the specified or all existing D-channels on the base station controller.
DSB:[[NAME=<D-channel link set names> | <all> def] |
[NUMBER=<D-channel link set numbers> | <all> def]]:
[[<unit type> | <all> def] | [<unit index> | <all> def]]:
[[<SAPI=<service access point identifier> | <all> def] |
[PCM=<external PCM of D-channel> | <all> def]];
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 41/67
41 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Checking D-Channel
Example : Checking D-Channel at ET/PCM=98
< ZDSB:::PCM=61;
LOADING PROGRAM VERSION 9.14-0
DX 200 BATURADEN 2005-02-28 15:59:58
INTERROGATING BASE STATION CONTROLLER D-CHANNEL DATA
EXT SUB TERM LOG LOG INT
NAME NUM SAPI TEI BR PCM-TSL-TSL C UNIT TERM FUNC UNIT TERM PCM-TSL
----- --- ---- --- -- ----------- - --------------- ---------- -------
OM001 15 62 1 16 61-31-0 BCSU-0 1 3 4160H 13 6-03
T0011 16 0 1 32 61-25-0 BCSU-0 2 3 4160H 14 64-03
T0012 17 0 2 32 61-25-4 BCSU-0 1 4 4160H 15 6-04
T0013 18 0 3 32 61-26-0 BCSU-0 2 4 4160H 16 64-04
T0014 19 0 4 32 61-26-4 BCSU-0 1 5 4160H 17 6-05
T0015 20 0 5 32 61-27-0 BCSU-0 2 5 4160H 18 64-05
T0016 21 0 6 32 61-27-4 BCSU-0 0 6 4160H 19 5-06
T0017 22 0 7 32 61-28-0 BCSU-0 1 6 4160H 20 6-06
T0018 23 0 8 32 61-28-4 BCSU-0 2 6 4160H 21 64-06
T0019 24 0 9 32 61-29-0 BCSU-0 0 7 4160H 22 5-07
T001A 25 0 10 32 61-29-4 BCSU-0 1 7 4160H 23 6-07
T001B 26 0 11 32 61-30-0 BCSU-0 2 7 4160H 24 64-07
T001C 27 0 12 32 61-30-4 BCSU-0 0 8 4160H 25 5-08
COMMAND EXECUTED
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 42/67
42 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Activate The D-Channel
From the user's point of view, the D-channel has the following working states:· working, WO-EX
· blocked, BL-XX
* blocked by system, BL-SY
* blocked by user, BL-US
· activation denied, UA-AD.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 43/67
43 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Activate The D-Channel
Activate the D-Channel using MML command sessionZDTC: MODIFY D-CHANNEL WORKING STATE
Use this command to modify the working state of a D-channel in a D-channel link set.
DTC: <D-channel link set name>:
<D-channel state change>;
Example : Activate the D-channel for BCF id =1, and PCM/ET ID = 98 (created at slide# 10)
ZDTC:OM031;WO
ZDTC:T0311:WO;
ZDTC:T0312:WO;
ZDTC:T0313:WO;
ZDTC:T0315:WO;
ZDTC:T0316:WO;
ZDTC:T0317:WO;
ZDTC:T0319:WO;
ZDTC:T031A:WO;
ZDTC:T031B:WO;
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 44/67
44 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
UNLOCKING THE SITE
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 45/67
45 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Unlocking The SiteTo unlock the site using RNW Manager:
1. Open RNW Manager application if not opened yet from Top Level User Interface ® Utils ® Network Configuration Mgmt ®RNW
Manager…
2. Expand the browser on the left for the destination BSC and the BCF which you want to unlock
3. Highlight the BCF then press Select
4. On the menu, click State ® Unlock
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 46/67
46 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Unlocking The Site5. Select Unlock children also to unlock the BTSs and TRXs then select OK.
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 47/67
47 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
TEST CALL
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 48/67
48 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
TEST CALL
The purpose of test call is for ensuring that the BTS is ready for commercialused and capable of handling traffic.
During test call, coordinating with drive test team and BTS engineer, check theoccupied TRX and RTSL.
Check the status of occupied TRX and RTSL from MML Command session.
ZERO: OUTPUT TRANSCEIVER PARAMETERSERO :( BCF = <BCF identification> ... |
BTS = <BTS identification> ... |
NAME = <BTS name> ... |
SEG = <segment identification> <option> ... |
SEGNAME = <segment name> <option> ... ) ,
[ TRX = <transceiver identification> ... |
IFREQ = <TRX identification with frequency> ... ] ;
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 49/67
49 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
TEST CALL
Example :ZERO:BCF=1,;
DX 200 BATURADEN 2005-02-28 16:05:15
TRANSCEIVER DATA
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-001 ADIPALA1
BTS-001 ADIPALA1 UNLOCKED WO
TRX-001 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX N
FREQ 5 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 50/67
50 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 16 T0011
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 1 0 TCHF 0 UNLOCKED WO FR
1 61- 1 1 TCHF 0 UNLOCKED WO ID
2 61- 1 2 TCHF 0 UNLOCKED WO FR
3 61- 1 3 TCHF 0 UNLOCKED WO ID
4 61- 2 0 TCHF 0 UNLOCKED WO ID
5 61- 2 1 TCHF 0 UNLOCKED WO ID
6 61- 2 2 TCHF 0 UNLOCKED WO ID
7 61- 2 3 TCHF 0 UNLOCKED WO ID
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-001 ADIPALA1
BTS-001 ADIPALA1 UNLOCKED WO
TRX-002 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX N
FREQ 40 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 51/67
51 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 17 T0012
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61 - MBCCH - UNLOCKED WO
1 61 - SDCCH - UNLOCKED WO
2 61 - SDCCH - UNLOCKED WO
3 61- 3 3 TCHF 0 UNLOCKED WO FR
4 61- 4 0 TCHF 0 UNLOCKED WO FR
5 61- 4 1 TCHF 0 UNLOCKED WO FR
6 61- 4 2 TCHF 0 UNLOCKED WO FR
7 61- 4 3 TCHF 0 UNLOCKED WO FR
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-001 ADIPALA1
BTS-001 ADIPALA1 UNLOCKED WO
TRX-003 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX Y
FREQ 1 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 52/67
52 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 18 T0013
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 5 0 TCHF 0 UNLOCKED WO ID
1 61- 5 1 TCHF 0 UNLOCKED WO ID
2 61- 5 2 TCHF 0 UNLOCKED WO FR
3 61- 5 3 TCHF 0 UNLOCKED WO ID
4 61- 6 0 TCHF 0 UNLOCKED WO ID
5 61- 6 1 TCHF 0 UNLOCKED WO ID
6 61- 6 2 TCHF 0 UNLOCKED WO GP
7 61- 6 3 TCHF 0 UNLOCKED WO GP
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-001 ADIPALA1
BTS-001 ADIPALA1 UNLOCKED WO
TRX-004 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX Y
FREQ 3 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 53/67
53 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 19 T0014
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 7 0 TCHF 0 UNLOCKED WO ID
1 61- 7 1 TCHF 0 UNLOCKED WO ID
2 61- 7 2 TCHF 0 UNLOCKED WO ID
3 61- 7 3 TCHF 0 UNLOCKED WO ID
4 61- 8 0 TCHF 0 UNLOCKED WO ID
5 61- 8 1 TCHF 0 UNLOCKED WO ID
6 61- 8 2 TCHF 0 UNLOCKED WO ID
7 61- 8 3 TCHF 0 UNLOCKED WO ID
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-002 ADIPALA2
BTS-002 ADIPALA2 UNLOCKED WO
TRX-005 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX N
FREQ 28 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 54/67
54 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 20 T0015
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61 - MBCCH - UNLOCKED WO
1 61 - SDCCH - UNLOCKED WO
2 61 - SDCCH - UNLOCKED WO
3 61- 9 3 TCHD 0 UNLOCKED WO ID ID
4 61- 10 0 TCHD 0 UNLOCKED WO FR
5 61- 10 1 TCHD 0 UNLOCKED WO ID ID
6 61- 10 2 TCHD 0 UNLOCKED WO FR
7 61- 10 3 TCHD 0 UNLOCKED WO ID ID
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-002 ADIPALA2
BTS-002 ADIPALA2 UNLOCKED WO
TRX-006 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX N
FREQ 7 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 55/67
55 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 21 T0016
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 11 0 TCHD 0 UNLOCKED WO ID ID
1 61- 11 1 TCHD 0 UNLOCKED WO ID ID
2 61- 11 2 TCHD 0 UNLOCKED WO ID ID
3 61- 11 3 TCHD 0 UNLOCKED WO ID ID
4 61- 12 0 TCHD 0 UNLOCKED WO ID ID
5 61- 12 1 TCHD 0 UNLOCKED WO FR
6 61- 12 2 TCHD 0 UNLOCKED WO ID ID
7 61- 12 3 TCHD 0 UNLOCKED WO ID ID
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-002 ADIPALA2
BTS-002 ADIPALA2 UNLOCKED WO
TRX-007 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX Y
FREQ 9 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 56/67
56 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 22 T0017
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 13 0 TCHD 0 UNLOCKED WO ID ID
1 61- 13 1 TCHD 0 UNLOCKED WO ID ID
2 61- 13 2 TCHD 0 UNLOCKED WO ID ID
3 61- 13 3 TCHD 0 UNLOCKED WO ID ID
4 61- 14 0 TCHD 0 UNLOCKED WO ID ID
5 61- 14 1 TCHD 0 UNLOCKED WO ID ID
6 61- 14 2 TCHD 0 UNLOCKED WO GP
7 61- 14 3 TCHD 0 UNLOCKED WO GP
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-002 ADIPALA2
BTS-002 ADIPALA2 UNLOCKED WO
TRX-008 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX Y
FREQ 11 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 57/67
57 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 23 T0018
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 15 0 TCHD 0 UNLOCKED WO ID ID
1 61- 15 1 TCHD 0 UNLOCKED WO ID ID
2 61- 15 2 TCHD 0 UNLOCKED WO ID ID
3 61- 15 3 TCHD 0 UNLOCKED WO ID ID
4 61- 16 0 TCHD 0 UNLOCKED WO ID ID
5 61- 16 1 TCHD 0 UNLOCKED WO ID ID
6 61- 16 2 TCHD 0 UNLOCKED WO ID ID
7 61- 16 3 TCHD 0 UNLOCKED WO ID ID
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-003 ADIPALA3
BTS-003 ADIPALA3 UNLOCKED WO
TRX-009 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX N
FREQ 35 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 58/67
58 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 24 T0019
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61 - MBCCH - UNLOCKED WO
1 61 - SDCCH - UNLOCKED WO
2 61 - SDCCH - UNLOCKED WO
3 61- 17 3 TCHF 0 UNLOCKED WO ID
4 61- 18 0 TCHF 0 UNLOCKED WO ID
5 61- 18 1 TCHF 0 UNLOCKED WO ID
6 61- 18 2 TCHF 0 UNLOCKED WO ID
7 61- 18 3 TCHF 0 UNLOCKED WO ID
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-003 ADIPALA3
BTS-003 ADIPALA3 UNLOCKED WO
TRX-010 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX N
FREQ 13 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 59/67
59 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 25 T001A
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 19 0 TCHF 0 UNLOCKED WO ID
1 61- 19 1 TCHF 0 UNLOCKED WO ID
2 61- 19 2 TCHF 0 UNLOCKED WO ID
3 61- 19 3 TCHF 0 UNLOCKED WO ID
4 61- 20 0 TCHF 0 UNLOCKED WO ID
5 61- 20 1 TCHF 0 UNLOCKED WO ID
6 61- 20 2 TCHF 0 UNLOCKED WO ID
7 61- 20 3 TCHF 0 UNLOCKED WO ID
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-003 ADIPALA3
BTS-003 ADIPALA3 UNLOCKED WO
TRX-011 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX Y
FREQ 15 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 60/67
60 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny Company Confidential
Test Call
D-CH TELECOM LINK SET 26 T001B
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 21 0 TCHF 0 UNLOCKED WO ID
1 61- 21 1 TCHF 0 UNLOCKED WO ID
2 61- 21 2 TCHF 0 UNLOCKED WO ID
3 61- 21 3 TCHF 0 UNLOCKED WO ID
4 61- 22 0 TCHF 0 UNLOCKED WO ID
5 61- 22 1 TCHF 0 UNLOCKED WO ID
6 61- 22 2 TCHF 0 UNLOCKED WO GP
7 61- 22 3 TCHF 0 UNLOCKED WO GP
ADM.STATE OP.STATE
--------------------------------------
BCF-001 UNLOCKED WO
SEG-003 ADIPALA3
BTS-003 ADIPALA3 UNLOCKED WO
TRX-012 EDGE UNLOCKED WO
BCSU-0
TRA NORM HRS Y PREF N
GTRX Y
FREQ 17 TSC 1 FRT 0 (REGULAR) LEV N (NOT USED)
BFREQ - BTSC - BFRT - BLEV -
DAL N (NOT USED) LEVD - 77 dBm
BDAL -
MA FREQUENCY LIST 32 SIGN 0
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 61/67
61 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny
Company Confidential
Test Call
D-CH TELECOM LINK SET 27 T001C
RTSL PCM-TSL SUB_TSL TYPE I.LEV ADM.STATE OP.STATE CH.STATUS
------------------------------------------------------------------------------
0 61- 23 0 TCHF 0 UNLOCKED WO ID
1 61- 23 1 TCHF 0 UNLOCKED WO ID
2 61- 23 2 TCHF 0 UNLOCKED WO ID
3 61- 23 3 TCHF 0 UNLOCKED WO ID
4 61- 24 0 TCHF 0 UNLOCKED WO ID
5 61- 24 1 TCHF 0 UNLOCKED WO ID
6 61- 24 2 TCHF 0 UNLOCKED WO ID
7 61- 24 3 TCHF 0 UNLOCKED WO ID
COMMAND EXECUTED
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 62/67
62 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny
Company Confidential
CHECKING ALARM
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 63/67
63 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny
Company Confidential
Checking Alarm
ZEOL: LIST ALARMS CURRENTLY ONWith the EOL command you print the BTS alarms that are currently on
EOL [ <BCF identification> ... | <all> def ] :
[[ NR = <BTS alarm number> | <all> def ] |
[ CLS = <alarm class> | <all> def ]] ;
Example : Check alarm currently on at BCF=01 at BSC Baturaden
ZEOL:1:;
TS ALARM LISTING
BATURADEN BCF-001 ENVIR 2005-02-23 00:13:04.31
*** ALARM
(10201) 7412 EXTERNAL AL 12
LOW VOLTAGE BATTERY
END OF BTS ALARM LISTING
COMMAND EXECUTED
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 64/67
64 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny
Company Confidential
Locking and Waiting for ATP
(Acceptance Test Protocol/Procedure)
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 65/67
65 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny
Company Confidential
Locking The Site and Wait for ATP
The purpose of Integration is for :
1. configuring interconnection between network elements
2. customising the radio network parameters
3. ready for commercial use
4. ready for calls (circuit and packet switched)
After integration process done successfully, then the site should be locked again (BCF-BTS-TRX’s) and waiting
for ATP (Acceptance Test Protocol/Procedure).
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 66/67
66 © NOKIA Integration 2G BTS Using Nokia NetAct.PPT / 28-02-2005 / Henny
Company Confidential
Locking The Site and Wait for ATPTo lock the site using RNW Manager:
1. Open RNW Manager application if not opened yet from Top Level User Interface ® Utils ® Network Configuration Mgmt ®RNW
Manager…
2. Expand the browser on the left for the destination BSC and the BCF which you want to lock
3. Highlight the BCF then press Select
4. On the menu, click State ® lock
8/2/2019 Integration 2G BTS Using NetAct_RNW
http://slidepdf.com/reader/full/integration-2g-bts-using-netactrnw 67/67
67 © NOKIA I t ti 2G BTS U i N ki N tA t PPT / 28 02 2005 / H
Locking The Site and Wait for ATP5. Select lock children also to lock the BTSs and TRXs then select OK.