intel® solid state drive data center tool user guide · pdf fileintel® solid state...

Download Intel® Solid State Drive Data Center Tool User Guide · PDF fileIntel® Solid State Drive Data Center Tool April 2016 User Guide 331961-007US 3 Contents 1 Introduction

If you can't read please download the document

Upload: dangdan

Post on 09-Feb-2018

229 views

Category:

Documents


12 download

TRANSCRIPT

  • Document Number: 331961-013US

    Intel Solid State Drive Data Center Tool

    User Guide

    February 2018

    Software Version 3.0.10

  • Intel Solid State Drive Data Center Tool

    User Guide February 2018

    2 331961-013US

    Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the

    absence or characteristics of any features or instructions marked "reserved" or "undefined". Intel reserves these for future

    definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The

    information here is subject to change without notice. Do not finalize a design with this information.

    Tests document performance of components on a particular test, in specific systems. Differences in hardware, software, or

    configuration will affect actual performance. Consult other sources of information to evaluate performance as you consider your

    purchase.

    No computer system can provide absolute security. Requires an enabled Intel processor, enabled chipset, firmware and/or

    software optimized to use the technologies. Consult your system manufacturer and/or software vendor for more information.

    The products described in this document may contain design defects or errors known as errata which may cause the product to

    deviate from published specifications. Current characterized errata are available on request.

    Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

    All products, computer systems, dates, and figures specified are preliminary based on current expectations, and are subject to

    change without notice.

    Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.

    *Other names and brands may be claimed as the property of others.

    Copyright 2018 Intel Corporation. All rights reserved.

  • Intel Solid State Drive Data Center Tool

    February 2018 User Guide

    331961-013US 3

    Contents

    1 Introduction ................................................................................................................................................................................................... 8

    1.1 Features ........................................................................................................................................................................................................... 8

    1.2 System Requirements ............................................................................................................................................................................... 9

    1.3 Supported SSDs ....................................................................................................................................................................................... 10

    1.4 Document Format .................................................................................................................................................................................... 10

    1.5 Running the Data Center Tool ............................................................................................................................................................ 11

    1.6 Command Syntax ..................................................................................................................................................................................... 11

    1.7 Targets .......................................................................................................................................................................................................... 11

    2 Command Line Options ........................................................................................................................................................................ 12

    2.1 Show Device Information ..................................................................................................................................................................... 14 2.1.1 Show Device ......................................................................................................................................................................... 14 2.1.2 Show Health Sensors........................................................................................................................................................ 22 2.1.3 Show SMART ........................................................................................................................................................................ 24 2.1.4 Show Performance Metrics ............................................................................................................................................ 27 2.1.5 Show Device Identification Structures ..................................................................................................................... 28 2.1.6 Show NVMe Controller Information .......................................................................................................................... 31 2.1.7 Show NVMe Log Information ........................................................................................................................................ 32 2.1.8 Show Phy Counters ........................................................................................................................................................... 34 2.1.9 Show HDA Temperature ................................................................................................................................................. 36 2.1.10 Show Read and Write Latency Statistics Tracking Information .................................................................... 38

    2.2 Configure Intel SSDs ............................................................................................................................................................................... 40 2.2.1 Firmware Update ................................................................................................................................................................ 40 2.2.2 Modify Device ....................................................................................................................................................................... 41 2.2.3 Execute Device Function ................................................................................................................................................. 44 2.2.4 Delete Device........................................................................................................................................................................ 47

    2.3 Configure Namespaces.......................................................................................................................................................................... 48 2.3.1 Create a namespace .......................................................................................................................................................... 48 2.3.2 Attach a namespace .......................................................................................................................................................... 50 2.3.3 Detach a namespace ......................................................................................................................................................... 51 2.3.4 Delete a namespace .......................................................................................................................................................... 52

    2.4 Instrumentation Commands ............................................................................................................................................................... 54 2.4.1 Show Tool Configuration ................................................................................................................................................ 54 2.4.2 Modify Tool Configuration ............................................................................................................................................. 55 2.4.3 Dump Device Data ............................................................................................................................................................. 57

    2.5 Support Commands ................................................................................................................................................................................ 59 2.5.1 Help Command ................................................................................................................................................................... 59 2.5.2 Version Command ............................................................................................................................................................. 63

    2.6 Debug ............................................................................................................................................................................................................ 65 2.6.1 Tool Debug File ................................................................................................................................................................... 65

  • Intel Solid State Drive Data Center Tool

    User Guide February 2018

    4 331961-013US

    3 Response Codes .........................................................................................................................................................