interface a up to 24 kv - thorne and derrick uk€¦ · · 2009-11-16interface a application up...
TRANSCRIPT
16
ACCESSORIESINTERFACE A
Up to 24 kVApplicationFor use with connectors andbushings with an interface Aas described by CENELEC EN50180 and 50181.
Technical characteristicsAll these products, except theearthing plug, are tested forAC withstand and partialdischarge prior to leaving thefactory.
6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV
12/20 (24) kV12.7/22 (24) kV
250GPEarthing plugIs designed to support andearth connectors with a type Ainterface when removed fromequipment.
Ordering instructionsOrder250GP for 12 kV or 24 kVapplications.
Ordering instructionsOrder151SOP for 12 kV orK151SOP for 24 kVapplications.
151SOPStand-off plugIs designed to support and'dead-end' connectors with atype A interface when removedfrom equipment.
150DPDead-end plugPlugs into connectors orreceptacles to provide 'dead-end' facility.Renders the assemblywatertight
Ordering instructionsOrder150DP for 12 kV orK150DP for 24 kVapplications.
150DRDead-end receptacleFits over a bushing with a typeA interface to provide 'dead-end' facility.Renders the assemblywatertight.
Ordering instructionsOrder150DR for 12 kV orK150DR for 24 kVapplications.The dead-end receptacle canbe supplied with an earth lead.Order: -/G. E.g. K150DR/G.
17
Kit MTEarthing kit for coppertape screened cablesContains a tinned copper braid(25 mm² - L=500 mm), atinned copper wire for cleatingand water sealing mastic.
Ordering instructionsOrderKit MT for 12 kV or 24 kVapplications.
200XSeparable cross connectorIs designed to connect fourcables of the same or varyingsizes or three cables toequipment.For an adapted bail, pleaserefer to the catalogue orcontact our representative.
Ordering instructionsOrder200X for 12 kV orK200X for 24 kVapplications.
1501J3-U-8Three-way junctionProvides a flexible means ofconnecting two or three cablesof the same or varying sizes.For an adapted bail, pleaserefer to the catalogue orcontact our representative.
Ordering instructionsOrder1501J3-U-8 for 12 kV orK1501J3-U-8 for 24 kVapplications.
200TSeparable tee connectorIs designed to connectthree cables of the same orvarying sizes or two cables toequipment.For an adapted bail, pleaserefer to the catalogue orcontact our representative.
Ordering instructionsOrder200T for 12 kV orK200T for 24 kVapplications.