Internal Doorsets

Taking our responsibilities seriouslyWithin this policy we have adopted the ISO14001 Environmental Management Standard to maintain and ensure continual improvement of our environmental performance.

It is our policy to operate our business in the following manner:

To comply with all UK Environmental legislation and prevent pollution. All emissions from our operations will be maintained within the standards required by local and national regulations.

To maintain the high ethical standards set by JELD-WEN Inc with every business, organisation, community and individual we have contact with, directly and indirectly.

To source all our materials from legal sources. In addition, we are committed to achieving the position where all timber purchases are from certificated legal and sustainable sources. We operate independently certificated and audited Chain of Custody procedures in each of our factories providing Chain of Custody product certification where required by our customers. We will use materials from CPET recognised certification schemes where suitable materials are available outside Chain of Custody certification. We seek to eliminate all other timber and wood-based materials from our business.

We support industry initiatives to provide environmental profiles for products of the type manufactured by JELD-WEN UK. Where environmental profiles produced by industry bodies do not adequately describe the profile of our products, we will seek unique profiles of JELD-WEN products.

We operate a transport policy with the objective of reducing carbon emissions through the use of the following standardising on use of diesel powered vehicles; standardising on vehicles equipped with satellite navigation systems, to improve vehicle use efficiency and encourage the use of shared vehicles and rail travel where opportunities permit within the needs of the business.

We work with suppliers to promote responsible ethical conduct of their businesses. Additionally, we support local charitable and community causes particularly where common shared interests exist.

We have a programme of employee awareness, training and education across our business to ensure this policy is communicated and understood by our employees. We also publish this policy through our website to ensure it is publicly available and constantly up to date.

2 3

ContentsReadyfitTM Standard Specification 4-5

ReadyfitTM Fire Doorsets Additional Components 6

ReadyfitTM Guide 8

ReadyfitTM Door Range 10

ReadyfitTM Installation Guide 14

SecurefitTM High Performance 16

SecurefitTM Component Breakdown 17

SecurefitTM Door Range 18

Additional Information 19

ReadyfitTM Internal Doorsets are supplied fully assembled with ironmongery, lining, architrave and doorstops supplied loose.(pairs are supplied un-assembled)

ReadyfitTM Internal Fire Doorsets have the same pre-assembled components as the standard ReadyfitTM Doorset but are supplied with an FD30 Firedoor and intumescent strip pre-fitted into the door frame.

Securefit Internal Flat Entrance Doorsets are pre-hung in a frame with intumescent strip with acoustic seal and have a drop-down seal for further reduction in sound transmission. They are FD30 and FD60 fire rated, acoustically improved, exceeding the requirements of Approved Document E of the Building Regulations, and meet PAS23-24 enhanced security requirements.

FSC® or PEFC specifiation available on request and must be agreed prior to order

PEFC/16-37-79

ReadyFitTM • Standard Specifications - MDF Lining4 Standard Specifications - Timber Lining • ReadyFitTM 5

Standard Specifications - MDF Lining

Standard Specifications - Timber Lining

1

2 3

4

5

6

7

8

9

1) HingesDoorsets are supplied with three 100mm hinges in gold effect, bright nickel effect, satin or white finishes.

2) Architrave Supplied un-assembled, ready for fitting on site and manufactured from moisture resistant foil wrapped MDF, giving superb quality appearance. Available in the following styles: Ogee / Ovolo / Torus / Twice Rounded.

3) Ironmongery Options include: 65mm tubular latch or 65mm bath lock - both available in bright polished steel or gold effect.

4) Lining Moisture resistant foil wrapped MDF (Medium Density Fibreboard) linings are 25mm thick plus 13mm for the stop, giving a total thickness of 38mm. Linings are available to suit all door thicknesses including hollowcore and FD30 fire doorsets. Size options are: 77mm / 90mm / 95mm / 100mm 115mm / 120mm / 125mm / 130mm / 140mm / 150mm

5) Door Stops Supplied loose for ease of installation, stops are machined to complement our range of 35, 40 and 44mm doors. Door stops are supplied in two sizes 27mm or 71mm according to the lining width.

6) Fixing Brackets These brackets are supplied reversed for transport and can be easily adjusted when fitting the doorset.

7) Strap Banded & Braced For ease of distribution and handling during fitting.

8) Carpet Clearance Supplied with a 15mm carpet clearance beneath the door.

9) Transporting Bracket Supplied fitted to keep the door closed during the fitting process.

image to come

1) Hinges Doorsets are supplied with three 100mm hinges in gold effect, bright nickel effect, satin or white finishes.

2) Ironmongery Options include: 65mm tubular latch or 65mm bath lock - both available in bright polished steel or gold effect.

3) Lining Untreated timber lining are 28mm thick plus 13mm for the stop giving total thickness of 41mm, all door thicknesses including hollowcore and FD30 fire doorsets. Size options are: 77mm / 90mm / 95mm / 100mm 115mm / 120mm / 125mm / 130mm / 140mm / 150mm

4) Strap Banded & Braced For ease of distribution and handling during fitting.

5) Carpet Clearance Supplied with a 15mm carpet clearance beneath the door.

6) Transporting Bracket Supplied fitted to keep the door closed during the fitting process.

7) Stops 27mm or 71mm x 13mm timber stops, pinned to the outside of the frame for fixing on site.

NB Pairs of doorsets are supplied unasswmbled.

1

2

4

3

5

6

7

Subject

to minimum

orders

requirement

NB Pairs of doorsets are supplied unassembled.

ReadyFitTM • Additional Components6 7

Additional Components

1

1) LiningSame options as the standard specification but supplied fitted with 10mm x 4mm intumescent strip to the jambs and head to achieve 30 minute fire protection when fitted with an appropriate JELD-WEN fire door.

Readyfit fire doorsets are also available with a FD60 rating. A hardwood unfinished frame with two 15mm x 4mm intumescent strips to the jambs and head.

2) Door Closer*Can be supplied loose, ready for fitting below the centre hinge on site.(not available to FD60 doorsets)

JELD-WEN is a member of the BWF-CERTIFIRE Fire Door & Doorset Scheme

*JELD-WEN are not liable for the effectiveness of the closing force to latch the door as many other factors influence effectiveness.

2

Available in a wide range of door types. See pages 10, 11, 12 and 13.

ReadyFitTM • Guide8 Guide • ReadyFitTM 9

ReadyfitTM GuideFEaturES & BEnEFItS MDF Linings:

• Solid reliable fixing system through the lining into the core of the wall, (required for the fire resisting doors, optional on non-fire resisting doors)

• Architrave tongue is self-adjusting to accommodate minor inaccuracies in partition widths

• Interlocking mechanical joints for a tight accurate fit of architrave

• MDF moisture resistant foil wrapped linings, stops and architraves

Doorsets can be delivered in house plots, with standard ironmongery fitted. Architraves and doorstops are fully machined and packed with the door. Fixing brackets are pre-fitted to the side of the frames. The doorstop groove in the lining facilitates the concealed fixing of the lining to the wall.

FEaturES & BEnEFItS Softwood timber Linings:

• Architrave not included

• Untreated ready for finishing on site

• 28mm thickness

• Stops pinned to the outside of the doorset

• Primed available to special order

• Engineered knot free timber

FEaturES & BEnEFItS Hardwood timber Linings:

• Architrave not included

• Untreated ready for finishing on site

• 55mm thickness

• Integral stop

Fire Doorsets - MDF Softwood and Hardwood timber Linings

Fire doorsets are available as FD30 or FD60 with intumescent strip or FD30S and FD60S with intumescent strip and smoke seal, fitted to the head and jambs of the lining. Door pairs are supplied un-assembled for ease of handling on site.

MobilityClear opening dimensions for doors are determined by a number of components. The table summarises this information by door size.

Clear opening width

Door Standard Clear FD30 Clear FD60 Clear Width Door Opening Fire Door Opening Fire Door Opening Thickness Thickness Thickness

457mm 35mm 412 44mm 403

533mm 35mm 488 44mm 479

610mm 35mm 565 44mm 556

686mm 35mm 641 44mm 632

711mm 35mm 666 44mm 657

762mm 35mm 717 44mm 708

838mm 35mm 793 44mm 784 54mm 774

864mm 35mm 819 44mm 810 54mm 800

914mm 35mm 869 44mm 860 54mm 850

526mm 40mm 476 44mm 472

626mm 40mm 576 44mm 572

726mm 40mm 676 44mm 672

826mm 40mm 776 44mm 772

926mm 40mm 876 44mm 872 54mm 862

Clear opening calculation =

Door width + 6mm for internal head size of frame

-51mm for 35mm thick doors

-56mm for 40mm thick doors

-60mm for 44mm thick doors

-70mm for 54mm thick doors

Based on a 13mm stop and 3mm edge gap.

BuILDInG rEGuLatIOnS Part M

LHH RHH

A 65mm tubular latch is supplied as standard, available in polished steel or gold effect. A 65mm bath option with thumbturn is also available. Both options are supplied with a fully adjustable keep to prevent door rattle once fitted on site.

MDF architrave is supplied foil-wrapped in white and is available in a choice of four styles. Architrave is pre-cut to length with a Hoffmann joint pre-machined when ordered with MDF linings, not available with timber linings.

Ogee (69 & 50mm) Torus (69 & 59mm) Twice Rounded (69 & 45mm)

Ovolo (69mm)

1. Structural opening size 2. Required door type 3. Door handing

4. Lining width5. Architrave type6. Ironmongery options

SIx POIntS tO nOtE BEFOrE OrDErInG JELD-WEn rEaDyFIttM DOOrSEtS

Door Size Structural Opening Size: (Imperial) MDF (NON FD+FD30) Timber Timber (FD60)

1981 x 457mm (6’6” x 1’6”) 2036 x 522mm 2036 x 527mm

1981 x 533mm (6’6” x 1’9”) 2036 x 598mm 2036 x 603mm

1981 x 610mm (6’6” x 2’0”) 2036 x 675mm 2036 x 680mm

1981 x 686mm (6’6” x 2’3”) 2036 x 751mm 2036 x 756mm

1981 x 762mm (6’6” x 2’6”) 2036 x 827mm 2036 x 832mm

1981 x 838mm (6’6” x 2’9”) 2036 x 903mm 2036 x 908mm 2051 x 938mm

1981 x 864mm (6’6” x 2’10”) 2036 x 929mm 2036 x 934mm 2051 x 964mm

1981 x 914mm (6’6” x 3’0”) 2036 x 979mm 2036 x 984mm 2051 x 1014mm

Door Size Structural Opening Size: (Metric) MDF (NON FD+FD30) Timber Timber (FD60)

2040 x 526mm 2095 x 591mm 2095 x 596mm

2040 x 626mm 2095 x 691mm 2095 x 696mm

2040 x 726mm 2095 x 791mm 2095 x 796mm

2040 x 826mm 2095 x 891mm 2095 x 896mm

2040 x 926mm 2095 x 991mm 2095 x 996mm 2110 x 1026mm

IrOnMOnGEry & COMPOnEntS

Doorsets are supplied with three 100mm hinges and are available in a choice of finishes.

Gold Effect Bright Nickel or Satin

White

HandingSupplied assembled and handed as per your order. Handing is viewed from the knuckle of the hinge as the door opens, towards you. Please state whether you require right or left hand when ordering.

*Please note: Handles are not supplied with ReadyfitTM Doorsets

StruCturaL OPEnInG SIZES

10 11ReadyFitTM • Door Range Door Range • ReadyFitTM

ReadyfitTM Door RangeChoose a core type:

MOuLDED DOOrS

Standard: Standard specification with approximate doorset weight of 18kg

Middleweight: Semi solid core with heavier feel - approximate doorset weight is 21kg

Heavyweight: Extra component providing a solid feel with improved acoustic properties - approximate doorset weight 34kg

Fire Doors: FD30 Fire Doors achieving a 30 minute fire protection when fitted in a JELD-WEN ReadyfitTM Fire Doorset - approximate doorset weight 39kg

StanDarD GLaZED DOOrS

SPECIaL GLaZED DOOrS

Twin TopClear

Half LightClear

3 LightClear

rEaL WOOD OVEr VEnEEr DOOrS

African Maple Sapele Beech Oak Koto Ash

FOIL VEnEEr DOOrS

Ash Beech Oak

PaInt GraDE & MDF VEnEEr DOOrS

Ply MDF

Newark CubeLinea

NEW NEW NEW

NEW NEWNEW

Smooth 6 Light Clear

Smooth 10 Light Clear

Woodgrain 6 Light Clear

Woodgrain 10 Light Clear

Woodgrain 6 Light Etch

Camden Woodgrain 6 Light Clear

Camden Woodgrain 10 Light Clear

Camden Woodgrain 6 Light Etch

2 Light Clear Newark Vertical Etch

Newark 6 Light Etch

Linea 1 Light Etch

Linea 5 Light Clear

Cube 5 Light Clear

Cube 1 Light Clear

NEWNEW

NEW Glazing

apertures

Rockport Smooth

Arlington Smooth

Atherton Smooth

Cambridge Smooth

Camden Woodgrain

Bostonian Woodgrain

Oakfield Woodgrain

Available as an FD30 Fire Doorset

rEaL WOOD OVEr VEnEEr CLEar nOn-WIrED StanDarD GLaZED FD30 FIrE DOOrS

GC01 GC05 GC07GC06 GC08

All available in Ash, White Oak, African Maple, Beech, Sapele and Koto

PaInt GraDE CLEar GEOrGIan WIrED GLaZED FD30 FIrE DOOrS

GG01 GG05 GG06

Glazing Aperture Sizes

GO Size top Margin Side Distance Between

01 457 x 457 150 150 -

05 760 x 150 150 150 225

460 x 150

06 1410 x 150 150 150 -

07 1700 x 90 150 150 100

08 225 x 225 150 central 120

09 1700 x 457 150 150 -

10 915 x 510 150 150 -

11 1150 x 150 410 150 -

12 915 x 150 150 150 -

12 13ReadyFitTM • Door Range Door Range • ReadyFitTM

FEaturE OaK DOOrS

6 Panel Flat 4 Panel Flat 4 Panel Flat Clear Glazed

Cottage Etch Cottage

aston Panel aston Clear Glazed

aston Obscure Glazed

Shaker 1 Panel

Shaker 1 Light Clear

Shaker 1 Light Obscure

Shaker 4 Panel

Shaker 4 Light Clear

MobilityClear opening dimensions for doors are determined by a number of components. The table summarises this information by door size.

Clear opening width

BuILDInG rEGuLatIOnS Part M

rEaL WOOD OVEr VEnEEr CLEar nOn-WIrED SPECIaL GLaZED FD30 FIrE DOOrS

GC09 GC12GC10 GC11

NEW Glazing

apertures

NEW Doorrange

Available as an FD30 Fire Doorset

14 15ReadyFitTM • Installation Guide Installation Guide • ReadyFitTM

ReadyfitTM Installation Guide

STep 1: Unscrew all fixing brackets, reverse them and re-fit ready to offer the doorset to the opening.

STep 2: Offer up the doorset into the opening, use packers on the edges of the doorset if required. To increase carpet clearance space packers may be positioned under each jamb.

STep 3: Screw the fixing brackets to the wall. Only screw them hand tight at this stage until step 4 is completed.

STep 4: Using a spirit level ensure the doorset is positioned square in the opening on all edges. Once this is achieved fully tighten the screws holding the fixing brackets.

STep 5: Now the doorset is in place, remove the banding and the packing bars.

STep 6: Unscrew and remove the transport bracket at the top of the doorset, holding the door slab in place.

Make sure you haveall components of yourReadyfitTM Doorset. Doorsets are supplied banded with a packer for

distribution and ease of handling during fitting.

STep 12: Apply an appropriate grab adhesive to the groove in the lining that the architrave will be positioned in.

STep 13: Press the two pieces of architrave in place, making sure that all areas are clicked into position and the corner joint is a tight fit.

STep 14: Add the final vertical piece of architrave, using a soft mallet if required.Make sure all is level. Repeat steps 11 to 15 on the reverse side of the door. The installation process is now complete.

STep 7: Make sure the door and the frame is plumb and square.

STep 8: Screw through the lining into the wall where machined for the door stops, in recommended fixing positions to further strengthen the fitting of the doorset.

STep 9: Fix the vertical door stops in position, using an appropriate grab adhesive.

STep 10: Take two pieces of the architrave, one edge and the top piece and offer them together.

STep 11: Using the Hoffmann Key provided assemble both pieces of the architrave together.

100m

m60

0mm

600m

m10

0mm

= Fixing points through the doorstop groove in the lining.

NB Fire doorsets require additional fixings, please refer to CERTIFIRE label.

16 SecureFit • High Performance

High PerformanceJELD-WEN SecurefitTM Doorsets are designed specifically for flat and apartment entrance situations where the highest standards in product performance are required. These doorsets comply with building regulations Part M, Part B, Part E and Part L.

JELD-WEN is a member of the BWF-CERTIFIRE Fire Door & Door Set Scheme

Part M: Available in a range of sizes for wider access.

Part B: Securefit doorsets are tested to BS476 Part 22 and perform to FD30 and FD60 requirement providing 30-minute and 60-minute fire protection. This product is also supported by the BWF-CERTIFIRE Fire Door Set Scheme.

Part E: The core construction, acoustic seals and drop down seals assist this product in compliance with acoustic regulations where flat entrance doors are required to have a sound reduction index of 29dBRW.

Part L: JELD-WEN SecurefitTM Doorsets provide improved conservation of fuel and power, plus have a U value of 1.60 W/m2k or better, meeting the requirements of this regulation.

SECurEFIt DOOrSEt BuILDInG rEGuLatIOn COMPLIanCE

pAS 23: General performance requirements for door assemblies:• Latching test• Hardware operating test• Initiate movement test• Resistance to vertical loads• Resistance to static torsion• Slamming resistance• Resistance to humidity• Resistance to thermal variation

pAS 24: Enhanced security performance requirements for door assemblies:• Hard and soft impact test• Mechanical loading test• Cutting and manipulation test• Security hardware test

U Values: FD30 Moulded: 2.0 W/m2k FD60 Moulded: 2.0 W/m2k

FD30 Flush: 2.0 W/m2k FD60 Flush: 1.8 W/m2k

Meets the requirements of PaS 23/24 Secured By Design

NEW FD60

Specification

available

17Component Breakdown • SecureFit

2. ADJUSTABLe Keep Door keeps are fully adjustable for ease when fitting on site.

4. HANDLe Lever handle supplied and available in gold effect or silver effect finish, incorporating an anti-bump thumb turn cylinder and cylinder guard. Supplied loose for site fixing.

5. HINGeS Supplied with three steel hinges in a choice of gold or silver effect. Hinges are CE Certified.

6. DROp DOWN SeAL a lorient drop down seal is supplied for improved acoustic performance.

7. INTUMeSCeNT &ACOUSTIC SeALS Fitted into the head and jambs of the frames, are intumescent strip including smoke and acoustic seals.

1. VIeWeR Door viewer is fitted as standard. these are available in gold or silver effect.

Component Breakdown

1

2

3

4

5

67

External View

Internal View

additional items available – FD30 letterplate and cowl and aluminium threshold strip.

3. eSpAGNOLeTTe LOCK 3-Point espagnolette lock, police approved under the requirement of PaS 23/24

Note: Handing is viewed from outside flat/apartment.

18 19SecureFit • Door Range

MOuLDED DOOrS

RockportSmooth

ArlingtonSmooth

AthertonSmooth

CambridgeSmooth

CamdenWoodgrain

BostonianWoodgrain

OakfieldWoodgrain

rEaL WOOD OVEr VEnEEr DOOrS

African Maple Sapele Beech White Oak Koto Ash

PaInt GraDE VEnEEr

Ply MDF

Door Size Structural Clear Opening Size Opening Size FD30 FD60

1981 x 838 2051 x 938mm 784mm 774mm

1981 x 864 2051 x 964mm 810mm 800mm

1981 x 914 2051 x 1014mm 860mm 850mm

2040 x 926 2110 x 1026mm 872mm 862mm

StruCturaL & CLEar OPEnInGS

Clear opening width

FraME SECtIOnS

FD30 FD60

CarPEt CLEaranCE - 20mm (10mm infill, 10mm drop seal action)

Clearance can be adjusted by cutting or packing each jamb at the time of installation.

Securefit Door Range

BuILDInG rEGuLatIOnS Part M

DeliveryJELD-WEN doorsets should arrive on site no more than two days prior to installation; this will avoid unnecessary damage through handling and general site conditions. Product should be thoroughly checked when delivered to ensure no damage has occurred during transport.

StorageDoorsets should be stored in a cool, dry place and stacked level in a horizontal position with a sufficient gap below the stack to allow air circulation. Please note: do not store doorsets in buildings that are being plastered or have recently been completed.

Installation - readyfitWhen installing the doorset where possible the fixing brackets should be used. In the event of an impractical wall it is possible to just screw through doorstop groove along the jambs in the illustrated locations on page 11.

When fitting a fire doorset it is essential that additional fixing takes place through the groove in the jambs. If there are any spaces (must be no more than 3mm) between the frame and the wall then an appropriate fire-resisting material must be used to fill those gaps.

Installation - readyfit Doorset FD30To add extra support due to the weight of the FD30 Fire Door. We recommend that one of the frame side hinge screws on the top two hinges, is replaced by a 50mm screw (not supplied) This should be driven through the frame into the supporting studwork should it be felt necessary on site.

Installation - SecurefitFull fitting instructions for Securefit doorsets are available on our website www.jeld-wen.co.uk

DecorationIf doors are supplied unfinished they should be decorated in accordance with British Standard Code of Practice BS6150: 2006 and BS8000 Part 5:1990. The stain or paint manufacturers instructions must be followed.

All surfaces must be treated (sealed) at the same time to prevent distortion from moisture imbalance. A base coat stain or paint primer are in themselves not a seal.

MDF foil wrapped linings, architraves and side panels can be left unfinished, however, if you wish to decorate we recommend one coat of water based gloss.

MaintenanceAll ironmongery should be lubricated on a regular basis to ensure smooth and correct functioning. JELD-WEN interior doors can be cleaned using a damp cloth, no abrasive materials should be used as this can damage the face of the door.

GuaranteesJELD-WEN Readyfit and Securefit doorsets have a 10 year guarantee against manufacturing defects. Factory finishing has a 5 year guarantee providing regular maintenance has been given to the door. Ironmongery carries a 1 year guarantee.

For full terms and conditions along with further information on guarantees please refer to our current Doors Catalogue or request details at www.jeld-wen.co.uk

Additional Information

Information

43

66

20 13

42

15 15 13

87

43

66

20 13

42

15 15 13

87

Newark CubeLinea

NEW NEWNEW

Softwood frame Hardwood frame

SS/MF/JWD1366/3k/MAY2012

JELD-WEN also manufacture a wide range of external doos, patio doors, windows and stairs.To request a brochure, call 01344 350270 or visit our website at www.jeld-wen.co.uk

JELD-WEN UK LTD

Retford Road, Woodhouse Mill, Sheffield, South Yorkshire, S13 9WH

T. 0845 122 2890 F. 0114 254 2365 E. marketing@jeld-wen.co.uk

Visit us at www.jeld-wen.co.uk Or scan our QR code with your smartphone.