international conference on advanced communications ... cqi(23) data(1) data(13) data data data data...
TRANSCRIPT
Uplink Frame structure of Short TTI system
Eunjeong Shin*, Gwendo Jo**
*Electronics and Telecommunications Research Institute, Daejeon Korea
**Second Company, Address Including Country Name
[email protected], [email protected]
Abstract— The study item on latency reduction techniques
was considered with shorter TTI length along with reduced processing times. When TTI length is shortened, the allowed processing times should be reduced linearly to achieve optimal gains. This needs to rely on new channel design. Latency reduction techniques is important KPI. 5G requirement LTE-evo needs low latency to fulfil 5G requirements, User pane latency <0.5ms end to end, reliability 99.999% in < 1ms. There are many shorted TTI length, now days, it is discussed on symbol 2, 4, 7 length.
In this paper, the frame structure supports the Legacy LTE system and low latency. UEs, NodeBs which is support the low latency system, it can support the legacy LTE system. Low latency system can support one way end to end latency 1ms.
Keywords— Short TTI, LTE, Uplink, low latency
I. INTRODUCTION
Recently, the transmission of user data within 1 ms is one of the vision for next generation 5G mobile communication and presented by domestic and foreign organizations have. This is different from previous generations of mobile communications, and in this paper, to support the recently mentioned low-latency services Analyze trends related to required low delay requirements. On the basis of this, a delay due to the TTI (Transmit Time Interval) Time was analyzed quantitatively and shows the frame structure, procedure, BLER results.
A shorter TTI is directly proportional to the air interface delay. Shortening the TTI by reducing the number of symbols is the most promising approach when seeking to maintain backword compatibility and usability in existing LTE band, the current 1ms TTI produces in practice a 10-20ms round trip time and less than 1ms one-way delay. In this paper, shows the approach that offers further reduction end-to-end delay in content delivery. It needs 1ms from NodeB MAC to UE MAC, and UE MAC to NodeB MAC. NodeB and UEs that can support the low latency, It can support the legacy LTE system. Now we discuss of low latency system which made of 2, 4, 7 symbol. This paper shows the subslot made of 2 symbol and resource mapping. The system which supports Short TTI, can share the frequency resource with legacy LTE system. Subslot channel is designed for supporting 1ms processing time. one subslot made of 2 symbols, so 7 subslots are included in one
subframe. In this paper, shows the low latency uplink frame structure and procedure, performance analysis results.
II. DL/UL FRAME STRUCTURE
DL/UL subslot include 2 symbols, in 1ms LTE subframe, it has 7 subslot. This frame structure can support the legacy LTE system. Middle of downlink system bandwidth, legacy downlink signal is mapping on this area. PSS, SSS, PBCH, PDCCH, PDSCH, PHICH,PCFICH,CRS can be mapped.
When the UE accesses the NodeB supporting the low latency and legacy LTE systems, the UE can operate in the low latency mode after receiving the PSS, SSS, and PBCH of the legacy system first.
Figure 1. Downlink Resource & channel mapping
Figure 2. Downlink Bandwidth mapping
827International Conference on Advanced Communications Technology(ICACT)
ISBN 978-89-968650-8-7 ICACT2017 February 19 ~ 22, 2017
Figure 2 shows the allocation of resources for legacy LTE bandwidth mapping and low latency resources. Both sides of the legacy bandwidth include guard bands when LTE system BW is odd numbered RB Figure 3 shows uplink resource & channel mapping. Legacy physical channel mapped in the middle of system BW. PUCCH is mapped on each end of legacy Bandwidth and it is frequency hopped at slot boundary. The low latency system uses frequency resources on both sides of the total uplink bandwidth. The control channel that transmits the uplink ACK / NACK and CQI of the low latency system uses both end frequency resources of the low latency frequency resource Figure 4 shows the uplink system BW mapping to low latency and legacy LTE system. Both side of Legacy system. Covered by guard band to prevent interference each system.
Freq.
`
SC 0
SC 1200
NumRB
Legacy Band
Low Laterncy Band
Low Laterncy Band
sample0PUCCH
sPUCCH
PUSCH
sPUSCH Figure 3. Uplink resource and Channel mapping
Figure 4. Uplink bandwidth mapping
i + 6
7 8 9 a b0 1 2 3 4 5 6
sTTI 0
sPDCCH + sPDSCH
Enc/Mod
c d
1ms
sPDCCH
DL DatasPDSCH
UL DatasPUSCH
sPDCCH/sPDSCH
Demod/Dec
DL Data
sTTI 1 sTTI 2 sTTI 3 sTTI 4 sTTI 5 sTTI 6
7 8 9 a b0 1 2 3 4 5 6
sTTI 7
c d
sTTI 8 sTTI 9 sTTI 0 sTTI 1 sTTI 2 sTTI 3
sTTI 0 sTTI 1 sTTI 2 sTTI 3 sTTI 4 sTTI 5 sTTI 6 sTTI 7 sTTI 8 sTTI 9
7 8 9 a b0 1 2 3 4 5 6 c d 7 8 9 a b0 1 2 3 4 5 6 c d
UL Grant
sPUCCH / sPUSCHEnc/Mod
UL Data
DL NacksPUCCH
sPUCCH + sPUSCH Demod/Dec
0 1
sTTI 4
sPDCCH
DL DatasPDSCH
sPDCCH + sPDSCH
Enc/Mod
DL Data
DL Ack/Nack
2 3 4 5
sTTI 5 sTTI 6
UL CRC UL Sch
DL-DCI
UL-DCI
DL-DCI
UL-DCI
Rx
Tx
Tx
Rx
eNB
PHY
MAC
UE
PHY
MAC
Rx
Tx
Rx
Tx
UL Data
DL Data
UL Sch
sTTI 4 sTTI 5 sTTI 6sTTI 0 sTTI 1 sTTI 2 sTTI 3
0 1 2 3 4 5
DL Sch
DL Sch
DL: 12 symbolUL: 13 symbol
i + 6
UL Sch
Figure 5. DL/UL low Latency system end-to-end processing Time
Figure 5 shows the end-to-end low-delay channel transmission and processing time. The downlink channel, sPDSCH, SPDCCH that started to prepare for transmission in subslot # 2 is transmitted from subslot 4 to the air. The UE receives the sPDSCH, sPDCCH in subslot 4 and demodulates sPDCCH, sPDSCH for 2.5 slot times. The ack / anck for the demodulated sPDSCH is transmitted through the sPUCCH and the sPDCCH including the uplink DCI is received, thereby transmitting the sPUSCH.
III. UPLINK DATA CHANNEL STRUCTURE
The low latency uplink data channel is transmitted in subslot units consisting of two consecutive symbols. The first symbol in a subslot maps to a reference signal every 3 subcarrier indexes.
Figure 6. DMRS and Data mapping in short Uplink TTI
CQI(0)
CQI(12)
CQI(24)
Data(2)
Data(14)
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
CQI(1)
CQI(13)
CQI(25)
Data(3)
Data(15)
Data
Data
Data
Data
Data
Data
Data
CQI(2)
CQI
CQI
Data(4)
Data
Data
Data
Data
Data
Data
Data
Data
CQI(3)
CQI
CQI
Dat a(5)
Data
Data
Data
Data
Data
Data
Data
Data
CQI(4)
CQI
CQI
Data
Data
Data
Data
Data
Data
Data
Data
Data
CQI(5)
CQI
CQI
Data
Data
Data
Data
Data
Data
Data
Data
Data
CQI(6)
CQI
CQI
Data
Data
Data
Data
Data
Data
Data
Data
Data
CQI(7)
CQI
CQI(31)
Data
Data
Data
Data
Data
Data
Data
Data
Data
CQI (8)
CQI
CQI(32)
Data
Data
Data
Data
Data
Data
Data
Data
Data
CQI(9)
CQI
CQI(33)
Data
Data
Data
Data
Data
Data
Data
Data
Data
CQI(10)
CQI(22)
Data(0)
Data(12)
Data
Data
Data
Data
Data
Data
Data
Data
CQI(11)
CQI(23)
Data(1)
Data(13)
Data
Data
Data
Data
Data
Data
Data
Data
CQI
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data (50 8)
Data (51 6)
Data
Data
Data
Data
Data
Data
Data
RI(16)
RI(12)
RI(8)
RI(4)
RI(0)
Data
Data
Data
Data
Data
Data
Data
Data
Data
ACK(8)
ACK(4)
ACK(0)
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
ACK(7)
ACK(3)
Data
Data
Data
Data
Data
Data
Data
Data
RI(15)
RI(11)
RI(7)
RI(3)
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Da ta (511)
Da ta (519)
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data (51 2)
Data (52 0)
Data
Data
Data
Data
Data
Data
Data
Data
RI(14)
RI(10)
RI(6)
RI(2)
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
ACK(6)
ACK(2)
Data
Data
Data
Data
Data
Data
Data
Data
Data
ACK(9)
ACK(5)
ACK(1)
Data
Data
Data
Data
Data
Data
Data
RI(17)
RI(13)
RI(9)
RI(5)
RI(1)
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Da ta (515)
Da ta (523)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
muxR
muxC
0 1 2 3 4 5 6 7 8 9 10 11
RI(0)
RI(2)
RI(4)
RI(6)
RI(8)
RI(10)
CQI(0)
CQI(2)
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI(28)
CQI(30)
Data(0)
Data(2)
RI(1)
RI(3)
RI(5)
RI(7)
RI(9)
RI(11)
CQI(1)
CQI(3)
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI
CQI(29)
CQI(31)
Data(1)
Data(3)
0
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 0
2 1
2 2
2 3
2 4
2 5
muxC
0 1
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data(72)
Data(74)
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data
Data(73)
Data(75)
muxR
4 8
4 9
5 0
5 1
5 2
5 3
5 4
5 5
5 6
5 7
5 8
5 9
Data(4)
Data
Data(5)
Data
The 1st OFDM symbol
Figure 7. Resource mapping LTE PUSCH vs sPUSCH
Figure 7 shows the placement of resources that can be mapped to the sPUSCH in one subslot. The sPUSCH can transmit the CQI and RI information in addition to the uplink data. However, the ACK / NACK information is transmitted only through the sPUCCH. The CQI, RI, and UL-SCH information are sequentially mapped according to available subcarrier indexes. The following formula shows the TB size that can be transmitted in one subslot. TBS 'is the TB size of legacy LTE.
8 '/ 7 / 8TBS TBS
sPUSCH transport channel encoding is the same as legacy LTE PUSCH channel except for channel interleaver mapping.
828International Conference on Advanced Communications Technology(ICACT)
ISBN 978-89-968650-8-7 ICACT2017 February 19 ~ 22, 2017
Encoded data are scrambled then symbol mapping, layer mapping is done after symbol mapping, then it mapped DFT engine. First symbol of sPUSCH has 8 subcarrier resource per 1 resource block. the second has 12 subcarriers. So the DFT engine size is 8xN size for first symbol, 12xN for second symbol. The DFTed symbol is mapped to a valid resource in a symbol not allocated to the DMRS in one subslot. The sPUSCH demodulation reference signal sequence is defined by
( )( ) ( )sPUSCH ,( ) /u v OCCr n w m r n L
LOCC=1 and ( ) ( ) 1w m for DCI format 0,if the higher-
layer parameter Acivate-DMRS-with OCC is not set.
The following simulation results show the low latency uplink data channel. The simulation results are similar with LTE Uplink Data channel.
Figure 8. AWGN sPUSCH simulation results
Figure 9. EPA sPUSCH simulation results
Figure 10. EVA sPUSCH simulation results
IV. UPLINK CONTROL CHANNEL STRUCTURE
Figure 11 shows the sPUCCH resource mapping in Uplink
frequency, time resources. sPUSCCH use the both side of low latency bandwidth. Reference symbol is mapped on even subcarrier index at the first symbol. Reference signal generation is the same as Legacy LTE system.
RSsc0,..., 1
' 0,1
n M
m
Figure 11. sPUCCH Format 0 structure
The complex-valued symbol d(0) shall be multiplied with
cyclically shifted length sPUCCHseq,lN sequence )(
)(,
~nr p
vu
for each
of the P antenna ports used for sPUCCH transmission according to
( )( ) sPUCCH, seq,
scale,
1( ) (0) ( ), 0,1,..., 1pp
l u v l l l
l
y n d r n n NP
sPUCCHseq, scale,
6 if 02 if 0
12 if 1 , if 1
0 otherwisel l
lP l
N l PP l
Generation of complex valued symbol d(0) is same as
Legacy LTE system. The block of complex valued symbol ( ) ( ) sPUCCH
seq,(0),..., ( 1)p ply y N
shall be scrambled by
( ')S m according to
1( ) sPUCCH sPUCCH ( )
seq, seq, 10' ( ')
Lp pl l lll
z m N l N n S m y n
Scramble code S(m’) is same as legacy LTE system. Resource used for transmission of sPUCCH format 1,1,a,1b are identified by a resource index (1, )
sPUCCHpn from which the
cyclic shift ss( , ', )p n m l
is determined according to
( ) sPUCCHss cs ss seq,
( ) cell sPUCCH sPUCCHcs ss cs ss shift seq,
( , ', ) 2 ( , ', )
( , ', ) ( , ', ) 1 ( ') mod
pp l
pp l
n m l n n m l N
n n m l n n m l l n m N
DeltaPUCCH shift sPUCCHshift is provide by higher layer.
The resource indics within the two short resource blocks in a sublsot to which the sPUCCH is mapeed are given by fro m’ = 0
(1, ) sPUCCH sPUCCHsPUCCH seq,0 shift( ') modp
pn m n N
Otherwise
829International Conference on Advanced Communications Technology(ICACT)
ISBN 978-89-968650-8-7 ICACT2017 February 19 ~ 22, 2017
sPUCCH sPUCCH sPUCCH sPUCCHseq,0 shift seq,0 shift( ') ( ' 1) 1 mod 1 1p pn m n m N N
Figure 12 shows the DER of sPUCCH format 1. It simulation
results are similar with Legacy LTE system.
Figure 12. DER of sPUCCH Format 1
V. CONCLUSIONS
The transmission of user data within 1 ms is one of the vision for next generation 5G mobile communication. This is different from previous generations of mobile communications, and in this paper shows low latency system structure and signal processing. It is based on Legacy LTE system and share the resources. The low latency system in this paper can be supports 1ms end-to-end transmission and show performance analysis results that similar with Legacy LTE system
ACKNOWLEDGMENT
This work was supported by the Institute for Information & communications Technology Promotion(IITP) grant funded by the Korea government(MSIP) [No. R0101-15-244, Development of 5G Mobile Communication Technologies for Hyper-connected smart services].
REFERENCES
[1] NOKIA Networks LTE-Advanced Pro Pushing LTE capabilities towards 5G
[2] NTT docomo, NTT DOCOMOS’s Activities Toward 5G [3] QUALCOMM, Leading the path towards 5G with LTE Advanced Pro [4] 3GPP 36.211, Physical channel and modulation
Eunjeong SHIN received the M.S. degree in telecommunication Engineering from Chungbuk University, South Korea in 2001. She has been working for Electronics and Telecommunications Research Institute (ETRI) as a researcher since 2001. She is currently a director of radio transmission technology section in ETRI. Her current research interests include 5G mobile telecommunication, D2D and M2M,NB-IoT
Gweondo Jo received the B.S. degree in electronics engineering and M.S. degree in mobile communications from Chonnam University, Gwang-ju,Korea, in 1991 and 1994, respectively, and the Ph.D.degree in computer and communication engineering from Chungbuk National University, Cheongju, Korea, in 2005.Since February 1994, he has been with Electronics and Telecommunications Research Institute (ETRI), Daejeon,Korea, where he has engaged in the research and development of third- and fourth-generation mobile
communication systems and softwaredefined radio (SDR). He is currently the Principal Engineer with the Internet Research Division, ETRI. His current research interests include digital predistortion for power amplifier linearization, IQ data compression, and beam space MIMO antenna system, NB-IoT
,
[2]
830International Conference on Advanced Communications Technology(ICACT)
ISBN 978-89-968650-8-7 ICACT2017 February 19 ~ 22, 2017