international program double degree master of sciences in … · international program double...
TRANSCRIPT
A.A. 2011-2012
International Program Double Degree Master of Sciences in
“Production Engineering and Management”
Faculty of Engineering – University of Trieste University of Applied Sciences Hochschule Ostwestfalen-Lippe
D.M. 22.10.2004, n. 240 Seat of Pordenone
Program Coordinator : Prof. Ing. Dario Pozzetto [email protected] – tel: 040-558.3805 – fax: 040-558.3812
President of the Academic Council :
Prof. Ing. Marino Nicolich [email protected] – tel: 040-558.3825 – fax: 040-558.3812
Teaching Commission:
Vice-President:prof. Ing. Mauro Reini – [email protected]
prof. Ing. Stefano Maset – [email protected]
INTRODUCTION ACCESS TRAINING UNITS
A.A. 2011-2012
Learning outcomes, expressed by the descriptors of the European qualification
- knowledge and understanding
- applying knowledge and understanding
- making judgement
- communication skills
- learning skills
INTRODUCTION: OBJECTIVES AND GENERAL (1)
ACCESS TRAINING UNITS
A.A. 2011-2012
The graduates taking part in the MSc degree course programs must:
-Have a sound knowledge of the theoretical and scientific aspects of
mathematics and other basic sciences and be able to use this knowledge to
interpret and describe the complex problems of engineering that require an
interdisciplinary approach;
-Have a sound knowledge of the theoretical and scientific aspects of
engineering, both generally and specifically, in relation to those of
management engineering, in which they are able to identify, formulate and
solve complex problems in innovative ways or in ways that require an
interdisciplinary approach;
-Be able to conceptualise, plan, design and manage complex and / or
innovative systems, processes and services;
- Be able to design and manage highly complex experiments;
- Have knowledge of context and cross-discipline capacity;
-Have knowledge in business organisation (corporate culture) and
professional ethics;
-
- Be fluent in both written and oral forms of at least one European language
other than Italian, with particular reference to vocabulary.
INTRODUCTION: OBJECTIVES AND GENERAL (2) ACCESS TRAINING UNITS
A.A. 2011-2012
The main career opportunities provided by the Master of Science
programs are: innovation and development of production, advanced
design, planning and scheduling, management of complex systems,
both in professional services firms both in manufacturing, process or
service, public administration
Graduates may find employment in manufacturing companies, service
companies and public administration for procurement and materials
management, organization and production, organization and
automation of production systems, logistics, project management and
management control, analysis of industry sectors, evaluating
investments and industrial marketing
INTRODUCTION: OBJECTIVES AND GENERAL (3) ACCESS TRAINING UNITS
A.A. 2011-2012 INTRODUCTION ACCESS: TITLE OF STUDY TRAINING UNITS
Admission to the class of the degree course requires possession of
curricular requirements attesting to an adequately sound knowledge of
general scientific principles and methods in basic science and
engineering disciplines that are preparatory to those that characterise
this class of degree.
Admission to Double Degree Master in Production Engineeering and
Management is subject to the possession of one of the following
degrees of University of Trieste:
- Bachelor of Sciences degree in Industrial Engineering
- Bachelor of Sciences degree in Information Engineering
- For graduates with different first level degrees, or for those coming
from other universities, entry requirements will be evaluated by a
Commission (as stated by the Academic Regulations of the Faculty)
with respect to the curriculum set out in the course regulations.
A.A. 2011-2012
INTRODUCTION ACCESS: CURRICULAR CONSTRAINTS TRAINING UNITS
For ACCESS is also necessary to have at least completed the following skills credits
(ECTS) in relevant scientific sectors:
MATHEMATICS…......................................................................................................15
PHISICS ………......................................................................................................... ..5
CHEMISTRY………………………………………………………………………………….. 5
INFORMATICS ……..................................................................................................... 5
MECHANICAL TECHNOLOGY or MECHANICAL PLANTS.......................................5
ENGINEERING, ECONOMICS AND MANAGEMENT) ….............................................5
ENGLISH LANGUAGE….……………………………………………………………Level B2
A.A. 2011-2012 INTRODUCTION ACCESS: MINIMUN MARK FOR BSc DEGREE TRAINING UNITS
• The number of available seats is limited to 20 (twenty)
• Admission is annually regulated by a call
• Who wish to apply for admission, in addition to the constraints as above,
must show a BSc degree mark greater than or equal to 90/110, Italian
mark, and B2 level (CEFR) of the English language knowledge
• List of candidates will be published after the evaluation of the curriculum
and an English language interview arranged by a committee of teachers
appointed by the Faculty Council.
• This evaluation shall also be taken by foreign graduates
A.A. 2011-2012 INTRODUCTION ACCESS TRAINING UNITS: GENERAL INFORMATION (1)
CHARACTERISING ACTIVITIES (B): 59 ECTS
- ING-IND/16 Technologies and processing systems 22 ECTS
- ING-IND/17 Industrial mechanical plants 27 ECTS
- ING-IND/35 Engineering economics and management 10 ECTS
- ING-INF/04 Automatic
INTERGRATIVE ACTIVITIES (C): 29 CFU
- MAT/08 – Numerical analysis 10 ECTS
- ING-IND/09 - Systems for energy and the environment 9 ECTS
- ING-IND/10 – Thermal phisics
- ING-IND/22 - Science and Technology of Materials 10 ECTS
A.A. 2011-2012
OTHERS: 32 CFU
- Free choise (D) : 8 ECTS
- Internship (F): 6 ECTS
- Thesis (E) : 18 ECTS
- TOTAL: 120 ECTS
INTRODUCTION ACCESS TRAINING UNITS: GENERAL INFORMATION (2)
FOR THE ACADEMIC COUNCIL ALL PROFESSORS WHO CARRY OUT TEACHING ACTIVITIES IN THE PROGRAM
DEAN OF THE FACULTY INGEGNERIA - UNITS
APPOINTS
ACADEMIC COUNCIL (TEACHING COORDINATION)
APPOINTS PRESIDENT
VICE PRESIDENT (IN ROTATION UNITS – HS-OWL)
DEAN OF THE FACULTY PRODUCTION ENG. AND ECONOMICS - HS-OWL
APPOINTS
THEY (President and VicePresident) APPOINT THE
TEACHING COMMISSION
- PRESIDENT
- VICE PRESIDENT
- 1 UNITS PROFESSOR
- 1 HS-OWL PROFESSOR
- 2 UNITS STUDENTS
- 2 HS-OWL STUDENTS
- WORK OUT TIMETABLE OF DIDACTIC ACTIVITIES
- ANY EVENTUAL CHANGES DURING THE YEAR
- WILL VALUE ALL DIDACTIC ACTIVITIES SUBMITTED BY STUDENTS
SUBMIT TO
IN ROTATION
UNITS – HS-OWL
A.A. 2011-2012 INTERNATIONAL MSc “PRODUCTION ENGINEERING AND MANAGEMENT” with University of Applied Sciences Ostwestfalen-Lippe
IV Sem
Certificate
OWL Certificate
UNITS Exams
Master Thesis 18 ECTS
Master Thesis 18 ECTS
Internship 6 ECTS
Together OWL and UNITS or separate
Internship 6 ECTS
Free Choice 8 ECTS
ECTS Free Choice 8 ECTS
1
III Sem
Management and information techniques of SME
Specialised wood processing Product and process development and optimization 3
Supply Chain Strategy 5ECTS
Enterprise resource planning 5 ECTS
Information technologies in furniture industry 5 ECTS
Non destructive testing of wood materials 5 ECTS
Advanced surface technologies 5 ECTS
Industrial bonding technologies 5 ECTS
Rapid development 5 ECTS
Advanced production technologies and optimization 5 ECTS
Advanced wood based materials 5 ECTS
II Sem Engineering Planning and Control Furniture technology Operations management 3
Product design and engineering of woodproducts 6 ECTS
Production planning and control 6 ECTS
Special machineries and facilities for wood and furniture 6 ECTS
Materials and technologies of the wood and furniture industry 6 ECTS
Operations management 6 ECTS
International Competencies Cogenerazione and industrial energy management 9 ECTS 1
Business English Intecultural Competencies
Industrial plants 9 ECTS 1
I Sem Wood Technology Quantitative methods for engineering 1
Production Technology Models and methods for logistics 5 ECTS
Scientific Computation and applied statistics 5 ECTS
Management
A.A. 2011-2012 INTRODUCTION ACCESS TRAINING UNITS: STRUCTURE OF THE DEGREE (1)
RECOMMENDED PLAN
---------------------------------------------------------------------------------------------------------------
COURSE SSD ECTS
----------------------------------------------------------------------------------------------------------------
1st year
----------------------------------------------------------------------------------------------------------------
Cogeneration and industrial energy management (C) ING-IND/09 9
Engineering Planning and Control (B) ING-IND/16 12
Furniture technology (B) ING-IND/17 12
Industrial Plants (B) ING-IND/17 9
Operations management (B) ING-IND/17 6
Quantitative methods for engineering (C) MAT/08 10
-------------------------------------------------------------------------- 58
A.A. 2011-2012
RECOMMENDED PLAN
---------------------------------------------------------------------------------------------------------------
CORSO SSD ECTS
----------------------------------------------------------------------------------------------------------------
2nd year
----------------------------------------------------------------------------------------------------------------
Management and information techniques of SME (B) ING-IND/35 10
Specialised wood processing (C) ING-INF/22 10
Product and process development and optimization (B) ING-IND/16 10
Free choice (D) 8
Internship (F) 6
Master thesis (E) 18
---------------------------------------------------------------------------- 62
INTRODUCTION ACCESS TRAINING UNITS: STRUCTURE OF THE DEGREE (2)
A.A. 2011-2012
RECOMMENDED PLAN
---------------------------------------------------------------------------------------------------------------
- The free choice course, according to DM 270/04, the choice is free, but
must be consistent with the training project
- The consistency will be assessed case by case by the Teaching
Commission
- Consistencies identified are: Thermal plants - ING-IND/11(8 ECTS) or
Mechanical Industrial plants II – ING-IND/17 (8 ECTS)
INTRODUCTION ACCESS TRAINING UNITS: STRUCTURE OF THE DEGREE (4)
A.A. 2011-2012
MASTER THESIS : 18 ECTS
--------------------------------------------------------------------------------------------------------------- The final exam consists in a discussion with a Commission, following the
academic regulations of the Faculty and the regulations to be agreed between
the Partner Universities, of a thesis that will demonstrate the attainment of the
skills set out by the educational objectives.
The thesis that is proposed for the final test should to be linked to a meaningful
experience reflecting the student’s interest as follows:
- An original design activity;
- A study on a topic of basic or of applied research;
- An experimental research carried out in university laboratories or in external
institutions.
The topic will be relevant to the internship, it will be carried out under the
guidance of a supervisor professor and of an external tutor if the thesis work is
carried out in collaboration with companies or public organisations.
INTRODUCTION ACCESS TRAINING UNITS: STRUCTURE OF THE DEGREE (5)
A.A. 2011-2012 INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (1)
COGENERATION AND INDUSTRIAL ENERGY MANAGEMENT
ING-IND/09 (9 ECTS)
--------------------------------------------------------------------------------------------------------------- - Students will be able to define simple steady state models of basic
components of energy systems.
- Students will be able to identify opportunity for energy saving, applying
cogeneration and integrating renewable energy sources into industrial energy
systems.
- Students will be able to use software for case studies.
A.A. 2011-2012
QUANTITATIVE METHODS FOR ENGINEERING
MAT/08 (10 ECTS)
^ Models and methods for logistics 5 ECTS
^ Scientific computation and applied statistics 5 ECTS
--------------------------------------------------------------------------------------------------------------- - Students will be able to approach some logistic problems.
- Students will be able to solve factory problems with exact models and
heuristic approach.
-Students will be able to use and develop software for case studies.
-Students will be able to solve mathematical problems arising in engineering.
- Students will be able to analyze data for understanding complex phenomena
and for decision making.
INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (2)
A.A. 2011-2012
INDUSTRIAL PLANTS
ING-IND/17 (9 ECTS)
--------------------------------------------------------------------------------------------------------------- Students will understand the importance of location, capacity and layout of a
plant
- Students will be able to choose a building design and general service
- Students will be able to design an internal transport and storage system
- Students will be able to design some general plants
INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (3)
A.A. 2011-2012
ENGINEERING PLANNING AND CONTROL
ING-IND/16 (12 ECTS)
--------------------------------------------------------------------------------------------------------------- - Students will be able to understand the product design and engineering process.
- Students will be able to apply the most important tools and methodologies in
process design.
-Students will be able to use and develop individual solutions for product design
and engineering optimization.
-Students will understand the manufacturing part flow through production
systems.
- Students will know standard tools and models for optimising the process
planning.
- Students will be able to detail programming (scheduling).
INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (4)
x y
z
A.A. 2011-2012
FURNITURE TECHNOLOGY
ING-IND/17 (12 ECTS)
^ Special machineries and facilities for wood and furniture 6CFU
^ Materials and technologies of the wood and furniture industry 6CFU
--------------------------------------------------------------------------------------------------------------- -Students will know the basic materials and technologies used in the wood and furniture
sector
-Students will know the properties of the finished products depending on the raw
materials and technologies used in the production processes
- Students will know all machinery, tools and facilities
- Students will know technology under different points of view: construction, engineering
and final use
- Students become able to design production departments, calculate capacity and
productivity, define material flows and production steps by respecting quantity and
quality requirements
INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (5)
A.A. 2011-2012
OPERATIONS MANAGEMENT
ING-IND/17 (6 ECTS)
---------------------------------------------------------------------------------------------------------------
- Students will develop an understanding of the main operations management
principles, techniques and tools to analyze, diagnose and then to improve
processes.
- Students will understand the concepts and techniques of inventory
management for independent and dependent demand items.
- Students will know the differences between push and pull systems.
-Students will be able to apply some quantitative tools to support decisions
concerning operations planning.
INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (6)
A.A. 2011-2012
MANAGEMENT AND INFORMATION TECHNIQUES OF SME
ING-IND/35 (10 ECTS)
^ Supply Chain Strategy 5 ECTS
^ Enterprise resource planning 5 ECTS
^ Information technologies in furniture industry 5 ECTS
--------------------------------------------------------------------------------------------------------------- - Students are knowing the systematic of the strategic management (steps,
procedures and main tools) and to apply the main tools to other new situations.
Use the whole concept as a current analysis to check the strategic situation of a
company and develop the necessary measures to optimize the situation
- Students learn fundamentals of Enterprise Resource Planning (ERP) and the
importance of integrated information systems. Earn basic knowledge of working
with ERP systems and understand different process modeling methods.
- Students learn the specifics of information technologies in furniture industry.
Earn basic knowledge of working with CAD, CAM and ERP systems and able to
apply different methods of data modeling
INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (7)
A.A. 2011-2012 INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (8)
SPECIALIZED WOOD PROCESSING
ING-IND/22 (10 ECTS)
-^ Non destructive testing of wood materials 5 ECTS
^ Advanced surface technologies 5 ECTS
^ Industrial bonding technologies 5 ECTS
-------------------------------------------------------------------------------------------------------------- - Students are knowing the anatomy of wood, it´s physical and elasto-
mechanical properties, methods for non-destructive testing of wood and
wood based materials.
- Students are knowing the functions of a surface and treatments improving
these functions and are able to setup the process chain in surface
technologies to optimize the surface quality.
- Students will develop and understanding the concepts and techniques of
wood bonding
A.A. 2011-2012
PRODUCT AND PROCESS DEVELOPMENT AND OPTIMIZATION
ING-IND/16 (10 ECTS)
^Rapid development 5 ECTS
^Advanced production technologies and optimization 5 ECTS
^Advanced wood based materials 5 ECTS
-----------------------------------------------------------------------------------------------------------
Students know about the entire development process from idea to launch.They are
aware of principals and methods of time compression in development cycles.
They understand different technologies of additive fabrication and are able to
apply them.
- Students are able to face production processes by using experimental, statistical
and engineering methods. They are able to work out strategies to control these
processes by different means.
- Students are knowing different wood based materials and related production
processes.They are able to manage optimization processes for wood based
materials.
INTRODUCTION ACCESS TRAINING UNITS: PROGRAM OF COURSES (9)
A.A. 2011-2012 INTRODUCTION ACCESS TRAINING UNITS: PROGRAMMI DEI CORSI (11)
MECHANICAL INDUSTRIAL PLANT II
ING-IND/17 (8 ECTS)
Free Choice
---------------------------------------------------------------------------------------------------------------
- design of industrial services (water distribution systems, sewers and
waste-water treatment, fire fighting equipment and devices, production
facilities and distribution of compressed air, fuel systems for the service,
industrial lighting, industrial electrical systems)
- design of special facilities (industrial air conditioning systems, heating
and air conditioning industry, waste treatment plants, biomass plants,
cogeneration systems, solar thermal and photovoltaic)
A.A. 2011-2012 INTRODUCTION ACCESS TRAINING UNITS: PROGRAMMI DEI CORSI (11)
ORGANISATIONAL BEHAVIOUR AND DESIGN
SECS-P/10 (8 ECTS)
Free Choice
---------------------------------------------------------------------------------------------------------------
- The underlying theme of the course is the need for organisational
effectiveness based on an understanding of organisational behaviour, the
people resource and the role of management as an integrating activity.
- Adopting a managerial perspective, the course provides a clear focus of
attention and helps to overcomes any perceived distinction between
organisational behaviour and organisational analysis.
A.A. 2011-2012 INTRODUCTION ACCESS TRAINING UNITS: PROGRAMMI DEI CORSI (11)
INDUSTRIAL ORGANISATION
SECS-P/06 (8 ECTS)
Free Choice
---------------------------------------------------------------------------------------------------------------
- The aim of the course is to study how to model and empirically analyse
markets characterised by strategic interaction among firms.
- The course focuses on theory of the firm and the industry, with an
emphasis on oligopoly theory, including oligopoly pricing and production,
strategic entry deterrence, anticompetitive strategies, product
differentiation and contractual relation between firms.