Inverpul SpecialtiesInverpul Specialties

*INVERPUL EPOXY PRIMER ANTICORROSIVE

*INVERPUL EPOXY PRIMER ANTICORROSIVE

Inverpul SpecialtiesInverpul Specialties

Thermosetting powder with epoxy resins cured with a fit hardener,containing special anticorrosive pigments, zinc metallic free. Theproduct is used for anticorrosive protection of metal structures, mainly on sand blasted to the Sa 2½-3 grade supports, like aprimer (thickness 50-70 Micron) before further coating with InverpulPolyester or Epoxypolyester powder and 2K liquid enamel likeInverplast and Inverpur.

GENERAL FEATURES

Cod. 87130*INVERPUL EPOXY PRIMER

ANTICORROSIVE

Cod. 87130*INVERPUL EPOXY PRIMER

ANTICORROSIVE

Inverpul SpecialtiesInverpul Specialties

Result after 1 year of exposure in industrial environment

Support used: Sand blasted steel Sa 2½

grade

Cycle with Polyester Extra 120 m in all

Cod. 87130*INVERPUL EPOXY PRIMER

ANTICORROSIVE

Cod. 87130*INVERPUL EPOXY PRIMER

ANTICORROSIVE

Inverpul SpecialtiesInverpul Specialties

Results after 750 hours of salt spray test

Competitor zinc rich Primer

Inver Primer

Cycle with Polyestere Extra

120 m in all

Cod. 87130*INVERPUL EPOXY PRIMER

ANTICORROSIVE

Cod. 87130*INVERPUL EPOXY PRIMER

ANTICORROSIVE

Results after 750 hours of salt spray test (comparison among Inver epoxy primer with zinc phosphates and

competitors zinc rich primers)

Competitor 1 Competitor 2 Inver

Competitor 3

Cod. 87130*INVERPUL EPOXY PRIMER FZ GREY

Cod. 87130*INVERPUL EPOXY PRIMER FZ GREY

Support used: Sand blasted steel

Sa 2½ grade

Inverpul SpecialtiesInverpul Specialties

Principal differences between a rich zinc primer (competitors) and the cod. 87130 Inver

Cod. 87130*INVERPUL EPOXY PRIMER

ANTICORROSIVE

Cod. 87130*INVERPUL EPOXY PRIMER

ANTICORROSIVE

Competitors Inver

Tap bulk density

1,4 0,675

Yield at 1 m 365 m2 675 m2

(+ 85%)

Salt spray test on

smooth steel (250 h)

No adhesion Good resistance