ipc/eia j-std-001 by the numbers: understanding the key ... · pdf fileipc/eia j-std-001 by...
TRANSCRIPT
1
IPC/EIA J-STD-001 by the Numbers:Understanding the Key SupportingDocuments
You are connected to our live presentation delivered via the internet.The webinar will begin shortly.
NEW
2
Attendee Quick Reference
Control Panel Features:Once you have joined our Webinar,you will see this GoToWebinar ControlPanel and Grab Tab. The controlpanel contains three panes that canbe expanded or collapsed by clickingthe arrow on the left side of eachpane.
To Leave a Webinar:1. From the Attendee Control PanelFile Menu, select Exit – LeaveWebinar.2. On the Leave Webinar?Confirmation dialog box, click Yes.
You can ask questions by typing text directly to thepresenter using the “Question and Answer” box
IPC/EIA J-STD-001 bythe Numbers:Understanding theKey SupportingDocuments
4
J-STD-001
5
The Specs asMentionedJ-STD-001
6
How 002 and 003 are mentioned inand used in J-STD-001
7
What Are J-STD-002 and 003
8
J-STD-002
9
J-STD-002 Coating Durability
10
IPC J-STD-003
1.5.1 Visual Acceptance Criteria Tests Test A – Edge Dip Test Test B – Rotary Dip Test Test C – Solder Float Test Test D – Wave Solder Test Test E – Surface Mount Simulation Test Test A1, B1, C1, D1 and E1 are for Lead-
free products
11
IPC J-STD-003
12
How 001 discusses 004
13
IPC J-STD-004
14
IPC J-STD-004, Flux Type
Fluxes shall also be classified accordingto the corrosive or conductive propertiesof the flux or flux residues as shown inthe following table
15
IPC J-STD-004, Test Requirements
16
IPC J-STD-004, Corrosion Testing
17
How 001 discusses 005
18
IPC J-STD-005, Requirements forSolder Paste
There are two (2) documents involvedwith solder paste. J-STD-005 Requirements for Solder Paste IPC-HDBK-005, Guide to Solder Paste
Assessment Each documents is helpful to provide the
correct information to qualify solderpaste.
19
IPC J-STD-005, Requirements forSolder Paste
This standard provides information on: Characterizing solder paste Testing solder paste
It discusses: Solder powder Paste flux Powder shapes Etc.
20
IPC J-STD-005, Requirements forSolder Paste
Section 3.3.2 Powder Size is shown intable form for Type 1 through Type 6
Each type is based upon the size of thepowder
Must be used in conjunction with the fluxspecification 004.
21
How 001 discusses 006
22
IPC J-STD-006, Requirements forSolder
This is the specification that replacedQQ-S-571, the military solder materialspecification.
23
IPC J-STD-006, Requirements forSolder
Section 1.2.3 Solder Forms
24
IPC J-STD-006, Requirements forSolder
Covers: Alloy composition Alloy impurities Solder forms
25
IPC J-STD-006, Requirements forSolder
26
IPC J-STD-006, Requirements forSolder
27
IPC J-STD-006, Requirements forSolder
Composition and Temperature Characteristicsof Common Tin-Lead Alloys
28
Conclusion
The specifications mentioned discussimportant information which needs to beunderstood
Let us know of your interest in havingsession covering these topics
29
Thank you
30
Upcoming Webinars
New Webinars added every month.Check back at:
http://www.eptac.com/webinars/upcoming.htm
Or contact us at: 1.800.643.7822
31
Further Information
For questions regarding this webinar,please contact Leo Lambert at
For information on any of EPTAC’s or IPC’sCertification Courses, please visit our
website at http://www.eptac.com