iplex sewerplex nusewers system · iplex sewerplex nusewers system may 2007 page 1 ... wormall...
TRANSCRIPT
IPLEX SEWERPLEX NUSEWERS SYSTEM
Disclaimer
All information contained in this brochure should serve as a guide only and is subject to change without notice. IPlex Pipelines Australia Pty Ltd does not invite any person
to act or rely upon such information and liability for such information is excluded. In particular, as new technology is developed rapidly, product specifications, designs
and components may change and IPlex Pipelines Australia Pty Ltd reserves the right in its discretion to make such changes as it sees fit.
The information contained in this catalogue does not form part of the terms and conditions of sale or constitute the description of any goods to be supplied by IPlex
Pipelines Australia Pty Ltd or its distributors. Before purchasing a good, customers should source current product information from their distributor and seek expert advice
on their particular intended use and application for the product.
Copyright © 2007 IPlex Pipelines Australia Pty Ltd. No part of this catalogue may be reproduced, stored in a retrieval system of transmitted in any form, electronic,
mechanical recording or otherwise without the consent of IPlex Pipelines Australia Pty Ltd.
PRODUCT RANGE
IPLEX SewerPlex Nusewers System
May 2007 Page 1
12m ‘A’
SewerPlex Pipe Metric - 12mtr Lengths - PE100 Coextruded Grey:
+GF+ ELGEF Electrofusion Couplers:
+GF+ ELGEF Electrofusion Caps:
Diameter(mm)
‘A’
NominalLength
(meters)
Productcode
Typical dimension
PHXC08110M
PHXC08160M
PHXC08250M
110
160
250
12
12
12
NominalDiameter (mm)
Dim.(mm)
‘A’
Productcode
Typical dimension
EG07110
EG0710160
EG0710250
110
160
250
145
180
244
NominalDiameter (mm)
Dim.(mm)
‘A’
Productcode
Typical dimension
PMH6010110
PMH6010160
PMH6010250
110
160
250
100
120
230
‘A’
‘A’
110
110
160
550
680
720
150
190
110
160
SewerPlex 88° Sweep Junctions:
Reducing:
Equal:
Productcode
Typical dimension
PMHX4408161188
PMHX4408251188
PMHX4408251688
160
250
250
Dia.(mm)
‘A’
Dim.(mm)
‘B’
190
250
250
Dim.(mm)
‘C’
Dia.(mm)
‘D’
Productcode
Typical dimension
PMHX440811088
PMHX440816088
110
160
Dia.(mm)
‘A’
Dim.(mm)
‘B’
Dim.(mm)
‘C’
480
600
Dia.(mm)
‘D’
88°‘A’
‘A’
‘C’
‘B’
‘B’
‘C’
‘D’
‘D’88°
IPLEX SewerPlex Nusewers System
SewerPlex 45° Junctions:
PRODUCT RANGE
May 2007Page 2
Equal:
Productcode
Typical dimension
PMHX440811045
PMHX440816045
PMHX440825045
480
600
880
Dim.(mm)
‘A’
110
160
250
Dia.(mm)
‘B’
150
190
250
Dim.(mm)
‘C’
300
400
580
Dim.(mm)
‘D’
‘A’
‘C’ 45°
‘B’
‘D’
Reducing:
Productcode
Typical dimension
PMHX4408161145
PMHX4408251145
PMHX4408251645
550
680
720
Dim.(mm)
‘A’
160
250
250
Dia.(mm)
‘B’
190
250
250
Dim.(mm)
‘C’
110
110
160
Dia.(mm)
‘E’
280
280
280
Dim.(mm)
‘D’
45°‘C’
‘B’
‘E’
‘A’
‘D’
DN110 x 750mm Radius SewerPlex Sweep Bends:
Productcode
Typical dimension
PMHX200811015SP
PMHX200811030SP
PMHX200811045SP
PMHX200811090SP
Angle of Bend (°)
‘A’
15
30
45
90
NominalDiameter (mm)
110
110
110
110
DN160 x 750mm Radius SewerPlex Sweep Bends:
Angle of Bend (°)
‘A’
NominalDiameter (mm)
Productcode
Typical dimension
PMHX200816010SP
PMHX200816015SP
PMHX200816030SP
PMHX200816045SP
PMHX200816090SP
10
15
30
45
90
160
160
160
160
160
110
110‘A’
110
160
160
160
‘A’
DN250 x 750mm Radius SewerPlex Sweep Bends:
Angle of Bend (°)
‘A’
Dim.(mm)
‘B’
Productcode
Typical dimension
PMHX200825015SP
PMHX200825030SP
PMHX200825045SP
PMHX200825090SP
15
30
45
90
250
250
250
250
250
250
250
‘A’
PRODUCT RANGE
IPLEX SewerPlex Nusewers System
May 2007 Page 3
Spigot Fitted with Hydrophilic Seals:
PMHX2016090BDEXT
Productcode
160x90D SewerPlex Bend PE100 Ext B/Drop CW Hydro
Description
DN160 External Blackdrop Bend Fitted with Hydrophilic Seals:
600
12512
‘A’ ‘B’
PMHX4416090BD
Productcode
160x90D SDR21 SewerPlex Junc PE100 - B/Drop CW Hydro
Description
DN160 External 90° Backdrop Junction Fitted with Hydrophilic Seals:
160
660
210
330
160 300
12512
160
300
25012
330
330
Dim.(mm)
‘A’
Dim.(mm)
‘B’
Productcode
Typical dimension
PMHX110SPIGOT
PMHX160SPIGOT
PMHX250SPIGOT
110
160
250
300
250
390
External 45° Backdrop Junction Fitted with Hydrophilic Seals:
‘B’
250 12
325 850
‘A’
45°
900
Dia.(mm)
‘A’
Dia.(mm)
‘B’
Productcode
Typical dimension
PMHX4416045BD
PMHX4425045BD
300
390
160
250
‘B’
PMHX2016090BDINT
Productcode
160x90D SewerPlex Bend PE100 Int B/Drop
Description
IPLEX SewerPlex Nusewers System
DN160 Internal Blackdrop Bend:
PMHX4308161188
Productcode
160x110x88D SewerPlex Riser PE100 CW Cap
Description
Vertical Riser Connection with Welded Cap:
PMHX44082516MSD
Productcode
250x160 SDR21 SewerPlex Junc PE100 Red - MS Drop
Description
DN250 x DN160 MS Drop Junction:
PRODUCT RANGE
May 2007Page 4
180
160
330
88°110
110
160
500
190
160
250
680
200
615
215
PMH47110160SED
45° Electrofusion Wastewater Saddles:
Dia.(mm)
‘A’
Productcode
Typical dimension
PMHX0516011045
PMHX0522511045
160
225-250
110
45°
‘A’
PRODUCT RANGE
IPLEX SewerPlex Nusewers System
May 2007 Page 5
PMH47110160SED
Productcode
110X160 PE100 SewerPlex Trap Sediment - CW SP ACC Coup
Description
DN110 Polyethylene Sediment Trap With PVC Cap & Coupling:
245 170170 140
160
110
40
2150
245 170170 140
160
110
40
780
PMH47110160SEDB15
Productcode
110x160x2.15M PE100 Extended SewerPlex Trap - CW SP ACC Coup
Description
Standard Single Connection
88o Reducing Sweep Junction
DN110 EF Couplers and Sewerplex Pipe
DN110 Sediment Trap
DN250 or DN160 Couplers and Sewerplex Pipe
Twin Property Connection
DN250 or DN160 Couplers and Sewerplex Pipe
88o Reducing Sweep Junction
DN110 x 45o
Equal Junction
DN110 x 45o
Sweep Bend
Optional Extended DN110 Sediment Trap
DN110 Sediment Traps
Slope Connection
DN110 EF Couplers and Sewerplex Pipe
DN110 Sediment Trap DN110 Sweep Bend (angle to suit slope)
DN250 or DN160 x 45o
Reducing Junction
DN110 x 45o
Sweep Bend
DN250 or DN160 Couplers and Sewerplex Pipe
Vertical Riser Single or Double Connections
DN250 Couplers and Sewerplex Pipe
DN250 x 160 x 45o
Reducing Junction
DN160 x 45o
Sweep Bend
DN160 x 110 x 88o Reducing Sweep Junction
DN110 Sediment Trap
DN110 EF Couplers and Sewerplex Pipe
DN160 x110 x 88o
Vertical RiserOptional Extended DN110 Sediment Trap
DN160 Connection and Terminal Entry Point
DN250 Couplers and Sewerplex Pipe
DN250 x DN160 x 45o
Reducing Junction
DN160 Sweep Bend (angle to suit slope)
DN250 x 90o Sweep Bend
DN160 Couplers, End Cap and Sewerplex Pipe
AYMROO DN250 Access Cap
DN160 x 45o
Sweep Bend
Maintenance Shaft Drop
Wormall Poo-Pit (supplied by others)
DN250 x 160 Maintenance Shaft Drop
DN160 Couplers and Sewerplex Pipe
DN250 or DN160 Couplers and Sewerplex Pipe
AYMROO DN250 Access Cap
Type A Manhole
DN250, DN160 or DN110 Spigot
DN250, DN160 or DN110 Spigot
Type C Oblique Backdrop
DN250 or DN160 Spigot
DN250 or DN160 x 45o
Backdrop Junction
Type D External Backdrop
DN160 Spigot
DN160 x 90o
Backdrop Bend
DN160 x 90o
Backdrop Junction and Coupler
COPYRIGHT © 2007 IPLEX PIPELINES AUSTRALIA PTY. LTD.
ABN 56 079 613 308
FOR ALL ENQUIRIES AND ORDERS CONTACT IPLEX ONLINE:
Phone: 13 18 40Fax: 13 18 60
www.iplex.com.au