Is Your Vehicle Wrap-Ready?

Mobile advertising considerations by NW Sign Solutions

Here are some considerations to ensure you get the best return on your investment – saving time and

money and extending the life of your vehicle wrap.

Before you bring it in...Most wraps, once scheduled, can be completed within 24-48 hours. Here are some helpful steps to ensure a good investment and the fastest turnaround time.

1.The vehicle should be thoroughly washed prior to the wrap install. A carwash is fine, but, please, no wax. If you forget, and wax is applied, we can remove it, but it does take a little more time (and cost).

Before you bring it in... (cont.)2. All surfaces need to completely dry prior to application. We usually advise bringing your vehicle to our shop the day before installation, so we can pull it inside to dry overnight.

3. If the vehicle has a rack, ensure a better wrap by removing it before you bring the vehicle in.

4. Be aware that wrap vinyl cannot be installed over rubber or plastic. Generally, all emblems, name plates, dealer stickers, and rubber or plastic trim should be removed.

Paint ConsiderationA common concern is whether a wrap could damage the vehicle.

Actually, for a vehicle whose paint is currently in good condition, a quality installation can protect and extend the life of the paint. Professional removal of the wrap within its 3-5 year lifespan will, in most circumstances, leave the paint looking good as new.

It’s when the paint is oxidized or peeling or poor quality that the wrap may be prone to failure and lifting. Non factory paint is a factor that can cause removal problems. To reduce these risks, installation and removal by experienced technicians is a must.

Stay tuned for our follow-up post on care and maintenance after the wrap install!