iso 527
TRANSCRIPT
Easily Conduct ISO 527 Compliant Tensile TestingSave time and money while doing it!
6000mm/min High Speed Tensile Testing
Automatically Perform 150 Consecutive Plastic Bending Testing
Easily Conduct ISO 527 Compliant Tensile Testing
Improve Efficiency with a Triple-Sample Tensile Testing System
Research and Quality Control of Epoxy Resin used in PCBs and ICs
Static Friction Coefficients and Kinetic Friction Coefficients
ISO 527 (Plastics -- Determination of Tensile Properties) specifies a specific range of data processing methods to use in obtaining data items, such as
elastic modulus. ISO 527 prescribes that elastic modulus be determined from the slope between extensions of 0.05% and 0.25%. In order to measure
these micro extensions, an accuracy of at least ±1 micron is required for the extensometer (for gauge length of 50 mm). Such measurements are not
possible with conventional automatic extensometers. However, Shimadzu´s new automatic extensometer, SIE-560S, satisfies this demand!
Additionally, the SIE-560S is capable of measuring both elastic and plastic regions, thus making it possible to measure elasticity and elongation at
break point. Another capability of the extensometer is PC control of the extensometer arm opening/closing functions and gauge length setting. This
provides ease of operation and reduction of operator-induced error, resulting in significant decreases in sample loss and reduced test-to-test time
requirements.
Features
Gauge length setting and extensometer arm opening/closing are PC controlled
Measures elastic modulus to elongation at break point (±1 micron accuracy)
Complies with ISO 527 plastic tensile testing
Semi-automation is possible
Extensometer Details
In addition to the SIE-560S introduced above, the standard model extensometer SIE-560 is also available. Please select the extensometer that best
suits your application.
Specifications
Category SIE-560S (High precision type) SIE-560 (Standard type)
Stroke Max. 560 mm (minus gauge length) Max. 560 mm (minus gauge length)
Max. 4 mm Max. 560 mm (minus gauge length)
Measurement accuracy Less than 0.5% of indicated value or ±1µm, whichever is
greater. Guaranteed in the range +18 - +28?C (Fluctuation
during testing within ±2?C)
Less than 0.5% of indicated value or ±2.5
µm, whichever is greater.Guaranteed in
the range +18 - +28?C (Fluctuation
during testing within ±2?C)
Compatible standards ISO 9513 Class 0.5 JIS B7741:1999 Class 0.5 (Method for validating
extensometers used for uniaxial testing) ASTM E83 Class B-2
(Verification and Classification of Extensometer System) JIS K7161
(ISO 527-1) JIS K7162 (ISO 527-2) (Plastics -- Determination of
tensile properties)
ISO 9513 Class 1 JIS B7741: 1999 Class 1
ASTM E83 Class C
Gauge length 50 mm (optionally variable 10 to 40 mm) 10 - 550 mm
Gauge length accuracy Less than 0.5% of set value
Sample
dimensions
Steel 0.5 - 3.2 mm (flat, dumbbell), 4 - 10 mm dia. (rod)
Aluminu
m
1 - 3 mm
Plastic 1 - 4 mm
Arm grip strength 0 to 7 N (variable)
Weight Main unit 28.5 kg; installation base 11.8 kg; adjuster 2 kg
Please inquire for sample sizes not listed above.