iso class 1-4 torque tool - eclipse · 2014-04-19 · rov umbilical spare data channel hydraulics...
TRANSCRIPT
I S O C L A S S 1 - 4 T O R Q U E T O O L
FEATURES
• ISO 13628-8 Class 1-4 Torque
• 80-400ft lbs/ 400-2000 ft lbs Dual Range
• Torque Feedback
• Turns Counter
• Latching Wings
WHAT'S INCLUDED
A019-959-959/01•TorqueTool•Class1&2Socket(11/16”Sq)•Class3socket(1-1/8”Sq)•Class4socket(1-1/2”Sq)•FishTailhandleandcage•HoseSet(JICwithSwagelokadaptors) •Lowrangeconvertor•Manual
SPECIFICATIONS
Interface: ISO 13628-8 Fig Class 1-4Maximum Torque: With gearbox multiplier 400-2000 ft lbsRecommended Range: (540-2700 Nm) With internal 1:1 drive 80-400 ft lbs (108-540 Nm)Motor Size: 236 ccLatching Strength: 1 tonne @ 160 BarMaterials: Steel motor and gearbox, Duplex socket, Aluminium housing, Acetal noseWeight: 34 kg in air / 28 kg in waterHydraulic: Mineral OilElectrical: 8 Pin Connector-Speed and Torque Feedback
THIS TORQUE TOOL has been specifically developed to provide the highest level of performance. It has integral torque and turns counting sensors for accurate control. When matched with a PSSL Torque Tool Control System, it can provide precise feedback on torque response of any subsea operation.
The tool conforms to the ISO 13628-8 Fig 18 class 1-4 bucket style used extensively in the subsea industry for valve overrides operated by ROV. The tool has latching wings allowing the tool to hold on to the interface. The latching wings are hydraulically driven forward and spring retracted. Thus in the case of a loss of hydraulic power the wings will release. The tool uses a high specification drive motor for consistent torque output characteristics, even if used with direct hydraulic pressure control without the feedback sensor. The motor shares casing oil with the gearbox therefore avoiding the need for a separate compensator.
Note: For applying torques less than 80 ft lbs we recommend the class 1&2 tool.
EGI_Torque_Tool_PRINT.indd 1 9/25/13 2:27 PM
PC
RS485
SURFACE
ROV UMBILICALSPARE DATA CHANNEL
HYDRAULICSCLASS 1-4 TORQUE TOOLWITH TORQUE FEEDBACKAND TURNS COUNTER CLASS 4 SOCKET 1-1/2" SQR
2000 ftlbs NOMINAL
CLASS 3 SOCKET 1-1/8" SQR1000 ftlbs NOMINAL
CLASS 1/2 SOCKET 11/16" SQR200 ftlbs NOMINAL
TORQUE TOOLCONTROLMANIFOLDWITH ELECTRONICS
ROV SYSTEM110 Vac
TORQUE TOOL & CONTROL SYSTEM CONFIGURATION
A & B PORTSSAE 04 15
196.5
150
SENSOR CONNECTIONBURTON 5507-1508
DRAIN & LATCHPORTS SAE 04
224
260
14.9
30
38 ISO
(1.5")
CLASS 4 SOCKET
170
OVERALL DIMENSIONS
I S O C L A S S 1 - 4 T O R Q U E T O O L
Eclipse Group, Inc. 1997 Annapolis Exchange Parkway, Suite 300
Annapolis, MD 21401, USA
Tel: +1 410 533 3041
E-mail: [email protected]
www.eclipse.us.com
A019-959-959/01 Torque Tool System with sockets, case, hoses, handle A019-959-959/02 Torque Tool System with sockets, case, hoses, handle and USD A019-959-202/01/S Spares Kit TX00105-100-00 Surface Verification Unit TL0011-0000-00 Subsea Verification Unit TL0017-0000-00 Flying Lead Tool A286-001-050/04 Torque Tool Control System A019-901-102 3 Stage Manifold (Use instead of Torque Tool Control System) A019-959-150 17H (High Torque) Nose Adapter A019-959-400 Petrobras Nose Adapter KitData Sheet: A001-350-006 issue 9
PART NUMBERS & OPTIONS
EGI_Torque_Tool_PRINT.indd 2 9/25/13 2:27 PM