issue 02 • september 2017 page 2 · 2017. 12. 6. · issue 02 • september 2017 page 3 ... times...

Faculty of Mechanical Engineering offers postgraduate degrees in a wide range of research fields. The Faculty has strong links with automotive, manufacturing as well as oil & gas industry in the East Coast Region.

Programmes offered:Doctor of Philosophy – ResearchMaster of Science – ResearchMaster of Mechanical Engineering -Coursework

Areas of research:Automotive Engineering

Structural Integrity & VibrationManufacturing

Computer SimulationProduct Design & Development

Corrosion & FractureMaterial EngineeringEnergy Sustainability

http://fkm.ump.edu.myFOR MORE INFO, VISIT:

ISSUE 02 • SEPTEMBER 2017 PAGE 2

EDITOR-IN-CHIEF’S MESSAGE


“this new KPI

also reminds us

all faculty

members to be on

our toes at all

times as the

nation will be

watching us!”

Prof. Dr. Rizalman MamatDean, Faculty of Mechanical Engineering

It may not be a coincidence that as I sat penning down thismessage on the eve of 60th Anniversary of our NationalDay, my mind wondered around questioning what exactlyhad the Faculty of Mechanical Engineering, UMP (FKM)contributed, big or small, towards nation building. Specialthanks to faculty members for being good since 5 years ofme as a Dean of FKM.

I instantly recalled the launching event of the East CoastRail Link (ECRL) by the Prime Minister on 9 August 2017 inBandar Baru Kuantan, when Universiti Malaysia Pahang wasspecially announced to focus on railway engineering andtechnology, in addition to its existing niche in mechanicaland automotive engineering, in order that the universitywould provide support, from construction to maintenance,in the upcoming construction of the ECRL. This decisionwas made by the Prime Minister because of UMP’sstrategic location of Gambang being close to the ECRL andits position being more or less at the centre of the ECRLroute from Kuala Lumpur to Kota Bharu. UMP, particularlythe Faculty of Mechanical Engineering, is active now on thedrawing board with the ECRL Industrial Skills TrainingProgramme which is expected to begin in September thisyear with a first intake of 300 students.

One reason why the Prime Minster indicated UMP toprovide technical support to the construction of ECRL isUMP's improved world ranking being currently among thebest 300 universities globally in Mechanical EngineeringProgramme. I am indeed thankful to the faculty membersfor their contribution towards this effort. The InternationalJournal of Automotive and Mechanical Engineering (IJAME)published by Automotive Engineering Centre (AEC), FKMhad achieved its ranking as the top journal in Asia and top10 percent at world level. Another journal published byFKM is Journal of Mechanical Engineering and Sciences(JMES), indexed in Scopus in 2015 and currently ranked top10 percent at world level in Energy Engineering and 12percent in Fuel Technology.

The faculty feels proud of our academic achievements thusfar and the new tasks entrusted by the nation upon us. Butthis new KPI also reminds us all faculty members to be onour toes at all times as the nation will be watching us!

RESEARCH GRANTS, PUBLICATIONS & AWARDS

“ In 2017 FKM

managed to secure

RM 4.802 million

which records an

increment of 32%

from previous year”

Research Grants

Every year, the Faculty ofMechanical Engineering(FKM), organizes aworkshop on how towrite grant proposals inorder to assistresearchers in acquiringresearch grants fromvarious institutions,government or privatesector. The available

grants are UMP InternalGrant, Science Fund,Knowledge TransferProgramme (KTP),Exploratory ResearchGrant Scheme (ERGS),Prototype ResearchGrant Scheme (PRGS),Fundamental ResearchGrant Scheme (FRGS),Research Acculturation

Grant Scheme (RAGS),and also ResearchAcculturationCollaboration Effort(RACE). The grantssecured are allocatedunder the Focus Groupsestablished in FKM,UMP since 2011.

There are seven focusgroups established inthe Faculty ofMechanical Engineering,namely; AutomotiveEngineering Focus Group(AUTO), AdvancedStructural Integrity andVibration ResearchGroup (ASIVR), HumanEngineering Group(HEG), ManufacturingFocus Group (MFG),Energy SustainabilityFocus Group (ESFG),Structural Material andDegradation (SMD) and


2016

2017



Overview for 2017.

Contribution by focus group for 2017.

57 92 12Total: 161

Publications

Advanced Liquid FocusGroup (ALFG). TheAdvanced Liquid FocusGroup is the mostrecently formed as amore focused sub-groupof the AutomotiveEngineering FocusGroup. Every year, eachgroup plans and aspiresto secure higher amountof research grant. Theabove figures illustratelatest total amount ofresearch grants securedin 2016 and 2017.

Most of the FocusGroups received grantsfrom Universiti MalaysiaPahang Internal Granttotally amounting toRM1.238 million in 2016and RM 1.725 million in2017. The secondhighest grants receivedwas from FRGSamounting to RM 1.571million. This is followedby KTP, Seed Money,RAGS, PRGS, ScienceFund and RACE. Thetotal amount of grantssecured by all six FocusGroups for the year2016 was RM 2.461million. In 2017 FKMmanaged to secure RM4.802 million whichrecords an increment of32.23%. The most

research active FocusGroup in 2017 isAutomotive EngineeringFocus Group whomanaged to secure RM1.614 million. Eventhough the allocatedamount of grant keepsdecreasing year by year,FKM research groupsmaintain at their best bysecuring higher amountof grants.

“Eventhough the

allocated amount

of grant keeps

decreasing year by

year, FKM

research groups

maintain at their

best by securing

higher amount of

grants.”

AwardsThe faculty has onceagain cemented itsposition as a leadingfaculty in UMP in termsof publication andcitation. This is provenby the number ofCendekia Bitararecipients from FKM.Cendekia Bitara is anannual academic awardsceremony that wascreated by UMP andorganized by Research &Innovation Departmentto recognize excellenceamong its staff. The


categories awarded thisyear and the numberfrom which are FKMstaff members areshown in the bar chart.

Excellent achievementhas also beendemonstrated by thenumber of medals wonin CITREX by FKM’s focusgroups as shown above.

FKM has also collectivelywon two awards whichare Anugerah MeritKualiti Naib Canselor(AKNC), and AnugerahKecemerlangan Industridan Masyarakat (BestIndustrial Partnerpresented to Dr. DaingMohd Nafiz )

Cendekia Bitara Awards and FKM’s achivement

FKM’s achievement in CITREX 2017 (Creation,

Innovation, Technology & Research Exposition)

Name Position

DR ZAKRI GHAZALLI Senior Lecturer (DS52)

DR GAN LEONG MING Senior Lecturer (DS52)

DR SAIFUL ANWAR CHE GHANI Senior Lecturer (DS52)

DR DAING MOHD NAFIZ DAING IDRIS Senior Lecturer (DS52)

DR WAN AZMI WAN HAMZAH Senior Lecturer (DS52)

DR FATIMAH DHAZARUDIN Senior Lecturer (DS52)

DR FTWI YOHANES HOGES Senior Lecturer (DS52)

IR. JAMILUDDIN JAAFARPEGAWAI LATIHAN VOKASIONAL (DV-44-A)

PUAN SUHAIDA MOHD SALLEH PEMBANTU TADBIR (N19-A)

PUAN RAIHAN AB MAJID PEMBANTU TADBIR (N19-A)

Recipients of Anugerah Perkhidmatan Cemerlang (APC) 2017



0

2

4

6

8

10

AERG MFG HEG ASIVR ESFG SMD

CITREX 2017

GOLD SILVER BRONZE


“ For the first time,

UMP is listed in QS

World University

Rankings thanks to

Mechanical

Engineering

Programme”

Mechanical Engineering of UMP ranked at #251-300 in QS

Ranking by Subject

For the first time ever,Mechanical EngineeringProgramme in UMP hasemerged among theworld’s top 300 bestprogramme in university,according toQuacquarelli Symonds(QS) World UniversityRankings by Subjects for2017. The resultindicates that thefaculty, in general, isimproving its reputationamong both the globalacademic communityand the world’semployers. According tothe QS World UniversityRankings report, theplacings are based onthe expert opinion of

75,015 academics and40,455 employers, afteranalysing 12.3 millionpapers and 75.1 millioncitations from thebibliometric databaseScopus/Elsevier, tomeasure the impact ofthe research producedby the universitiesranked.

The ranking of #251-300is based on the scoringof 61.2 in academicreputation, 65.8 incitations per paper, 49.8in employer reputationand 61.1 H-indexcitations. It is anoutstandingachievement as

Mechanical Engineeringis the only programme inUMP being placed in theprestigious ranking after13 years. Facultymembers and studentsare absolutely delightedwith the news and feelproud of theirachievement. BravoFKM!


Academic

Reputation

Citations per

Paper

Employers

Reputation

H-index

Citations

61.2 65.8 49.8 61.1

QS Ranking scoring for FKM.



FOCUS GROUP : MANUFACTURING FOCUS

GROUP (MFG)

“Not only active in

fundamental

research, MFG

members are also

embarking on

GREEN technology

research“

Established in 2011, MFGconsists of a few sub-groupsmainly known asManufacturing Processes,Materials, SurfaceModification, Joining and

Members: CEO - Ir. Dr. Akhtar Razali • Mentor - Dr Ahmad Nasser A.P. Dr. Mahadzir Ishak• A. P. Dr. Syarifah Nur Aqida • Ir. Dr. Rashidi Maarof • Ir. Dr. Asnul Hadi Ahmad • Ir. Dr. NikMohd Zuki • Dr. Fadhlur Rahman • Dr. Jasri Mohamed • Dr. Fadzil Faisae • Dr. Siti Haryani •Dr. Mas Ayu • Mr. Rosdi Daud • Dr. Siti Rabiatull Aisha • Dr. Nurzalikha Khalil • Dr. AimanMohd Halil • Mr. Hadi Salam • Mr. Mohd Reza Zalani •

Welding, Industrial Engineering, Machine Designand Automation.The group is broadly active in different activitiessuch as research and publications, consultancy,training, charity, and symposium. Here, we highlight some of the the group’sachievements in 2017.

Continuous Development Programme

Meeting at Sapura Technical Centre

Visit from Helan No.1 Ningxia School China to

Joining and Welding laboratory

A training session conducted by

Dr Fadzil Faisae on genetic

algorithm optimization on 7-8

August

One of the modules

published

Awards won by Mr Rosdi and Dr Mas Ayu in CIREx

Vision , mission and strategy meeting

FOCUS GROUP : AUTOMOTIVE ENGINEERING

RESEARCH GROUP (AERG)


Members: CEO - Dr. Devarajan Rama • Mentor - Dr. Muhamad Mat Noor • Prof. Dr.Rizalman Mamat • Prof. Dato’ Dr. Rosli Abu Bakar • Prof. Dr. Md Mustafizur Rahman • A. P.Dr. Kumaran Kadirgama • A. P. Dr. Abdul Adam Abdullah • Dr. Gan Leong Ming • Dr. FtwiYohaness Hagos • Dr. Mohamad Heerwan Piee • Dr. Mohd Razali Hanipah • Dr. Fitri Yusop •Dr Wan Azmi Wan Hamzah • Dr. Mahendran Samykano •Hj. Amirruddin Abdul Kadir •DrAdnin Hamidi• Dr. Nurul Akmal • Dr Izhak Ishak • Fadzil Rahim • Dr Sudhakar

Established in May 2008, the main objective of AERG is to address the need ofautomotive industries in research and development; to contribute to thenation for collaboration research, consultation and professional works; toincrease knowledgeable and competent human capital especially ResearchScientists and Engineers (RSE) as well as to provide technical support to theautomotive - based industries.

As the breadth of knowledge increases, oneAERG member was appointed as visiting lecturerat MEGATECH INTERNATIONAL COLLEGE (MITC).

CITREX 2017 winnersVehicle Electronics-CAN/LIN Bus

Vektor system testing and

development benchmarking with

Prof. Dr. Peter Neugebauer (HsKA).

Energy Audit Training for members

In March 2017, The CEO of AERG, was called together with FKM managementto sign a MOU collaboration with MITC.

Visiting lecturer and MoU signingAERG members invited as

jury during IID in March

AERG and other Faculty Members meeting with the Dean

Target 2017

FOCUS GROUP : ENERGY SUSTAINABILITY

FOCUS GROUP (ESFG)


ESFG is a group of 11 researchers who areactively involved in various energy researchfields including photovoltaic solar system,fluidized bed combustion, bee farmingtechnology, vortex tube, refrigeration, air-conditioning and building energy consumption.

Led by CEO Dr. Mohd Hazwan Yusof andmentored by Dr. Firdaus Basrawi, the work ofESFG group is widely recognized throughpublications in international journals,memorandum of understanding and researchgrant funding from Japan. In the local arena,apart from organizing the annual Symposiumon Energy Sustainability (SES) in collaborationwith Universiti Teknologi PETRONAS (UTP), theFocus Group has been involved in developingfor the community in the mechanization of beefarming.At the national level, multiple grants includingFRGS, KTP and PPRN have been secured. At theinternational level, one international grant froma Japanese company, Eco 24 Co. Ltd. has beenawarded. All these grants have resulted inseveral research papers have been producedincluding 9 ISI articles.

Energy audit and visits to industries arefrequently done in order to enhance and sharethe group’s knowledge in the particular area.For a better energy usage and sustainability incampus, ESFG helped UMP to install aphotovoltaic solar system on a walkway’s roof.ESFG also joined an expedition with the localcommunity to comprehend and support theeconomic activity of the local community. Forstudents, ESFG creates ESFG Open Day eventwith help from MECHAPRO to give students anearly approach to research exposure. Suffice tosay, the exploration of learning and servingcommunity is an endless journey for the teamin ESFG.

SES2017 preparation (30/3/2017)

Photovoltaic

Solar System

installation

(5/4/2017)

Energy Audit of

Crystal Clear

Technology Sdn Bhd

(17/7/2017

Presenting an Energy Audit Report to

Kobelco Material Copper Tube Sdn Bhd

(17/7/2017)

ESFG Open Day

(26/4/2017)

Expedition

Kelulut Tok Gajah

(30/5/2017)

FOCUS GROUP : STRUCTURAL MATERIAL &

DEGRADATION (SMD)

The mission of SMD covers the needs to developand improve structural materials, including metalsand polymer/composite for sustainable and highperformance materials.

Led by the CEO, Dr. Juliawati Alias and Dr. AhmadSyahrizan Sulaiman as the mentor, the group with11 active members are engaged in several researchprojects and commited to fostering skills andexpertise in the undergraduate and postgraduatestudents research. The focus group is also involvedin industrial and consultation projects. As for now,SMD is dedicatedly engaged with 14 activepostgraduate supervision, with over 18 internaland external grants for the current year thatcontributes to over RM1 million since the past 5years.

As continuation of their expanding research andfuture collaboration with the industries, the groupis involved in several visits, activities and trainingsession. Sharing skills and knowledge in corrosion,a brief lecture and short demo on electrochemicalmeasurement and corrosion was conducted on 3May 2017, followed by another short lecture onceramic degradation by a visiting lecturer fromAKPrind Institute, Jogjakarta Indonesia on 16 May2017. A training on mechanical testing forpolymer/composite materials was also conductedto enhance the students’ knowledge and skills aswell as aimed for the benefit of future graduateemployability. A technical visit to Norimax Malaysiain Puchong for future collaboration in corrosionprotection was held on 9 May 2017.

Industrial visit to Norimax,

Puchong on 9th May 2017

Electrochemical measurement

and corrosion short demo on 3rd

May 2017

A photo session after a short

lecture on ceramic degradation

by Dr Wawan from AKPrind

institute on 16th May 2017

Training on mechanical testing

for polymer-composite materials

on 24th May 2017


To better understand the nature problems of corrosion and the commoncorrosion protection, the group has been given the opportunity to shareresearch experience, skills and moving towards improved laboratorytechniques, standards and technologies, particularly in structural materialsresearch areas.

FOCUS GROUP : ADVANCED STRUCTURAL

INTEGRITY & VIBRATION RESEARCH (ASIVR)

Members: CEO - Dr. Ngui Wai Keng • Mentor - Prof. Ir. Dr. Nik Abdullah Nik Mohamed • Ir.Dr. Zamri Mohamed • Ir. Dr. Mohd Fairusham Ghazali • Dr. Gigih Priyandoko • Dr. MohdHafizi Zohari • Dr. Mohd Shahrir Mohd Sani • Mr. Mohd Firdaus Hassan • Mr. Cke Ku EddyNizwan Che Ku Husin • Mr. Rosmazi Rosli • Mr. Mohd Fadhlan Mohd Yusof • Ms. NurazimaIsmail

ASIVR researchers at CITREX 2017

ASIVR researcher at

Malaysia Technology

Expo (MTE 2017)

• ASIVR Focuses on areas of vibration & structural integrity with researchcovering noise & vibration, machine structural dynamic, signal processing &machine learning, material fatigue and integrity.

As the breadth of knowledge expands, an ASIVR member has been appointedas visiting lecturer at Universitas Muhammadiyah, Banda Aceh, Indonesia. InApril 2017, 3 lectures were delivered, namely; how to develop focus universityin engineering and technology, vibration in designing a bridge, and how toproduce good research proposal. Other than that, ASIVR is also active inperforming community services. In April 2017, one ASIVR member was invitedto give a motivational talk for students in Banda Aceh, Indonesia

Motivational talk by ASIVR member for

students in Banda Aceh, Indonesia

Dr. Mohd Shahrir, FKM’s Visiting Lecturer to

Universitas Muhammadiyah, Banda Aceh, Indonesia

Consultation project presentation by ASIVR

in Photonic Research Centre, UM

In the area of consultation, in early2017, an interactive motor control withgraphical user interface for laserablation position was designed byASIVR for Photonic Research Centre,University of Malaya.


FOCUS GROUP : HUMAN ENGINERING GROUP

(HEG)

CITREX ‘17

Arduino training conducted in FKM,

UMP on 15-16 April 2017

National Symposium on Powder Metallurgy and Particulate Materials 2017, UTP (17 April 2017)

Invited speaker for Offshore Structure Modeling Competition, OCMC2017 (10 April 2017)

Tissue Engineering And Regenerative Medicine (Term) - A Holistic Approach (25 May 2017)

Road to commercialization at UPM-MTDC (24 February 2017)

Research Meeting with UIA, UNITEN, USM and University of Canterburry at HUIAM ICU (2-3 February 2017)

Building Information Modeling Management for Landmark Project (21 March 2017)

AINEX 2017

The Human Engineering Group (HEG) conductsresearch which includes application in areassuch as the development of medical devices andtechnology for diverse user groups, includingpatients, medical doctors and physiotherapists.The group believes that the combination ofknowledge from a myriad of fields which includes engineering, physiotherapy,rehabilitation and medicine together with technology is key in improving medicaland healthcare systems, human health and quality of life. HEG has participated innumerous exhibitions including Creation, Innovation, Technology & ResearchExposition (CITREX) and Advanced Innovation & Engineering Exhibition (AINEX)2017 to showcase its new ideas in innovation.

HEG has actively organized seminars incollaboration with various groups and HEGmembers are also invited as speakers at variousforums and conferences.HEG also provides consultation and training in itsexpert areas. Among projects that can be cited areArduino Workshop, Software , Development for

Appointment Scheduling in Klinik Kesihatan Pekan, Replacement of Gondola onMBKT New Building. HEG is also currently in progress toward commercializationof a rehab device to assist brain injury patient.


STUDENT ACTIVITIES

“MECHAPRO hosts

various activities

throughout the year to

encourage student

development outside

the classroom. ”

Mechanical Engineering Professional Students Club(MECHAPRO) hosts various of activities throughoutthe year to encourage student developmentoutside the classroom. Activities include FocusGroup Open Day, which exposes students toresearch opportunities in higher degreeprogrammes while forging a better relationshipbetween lecturers and students. The club was alsoresponsible in organizing TRIUMP 2017 whichattracted 100 participants consisting of UMP

students and high school students in the viscinity of Kuantan and Pekan.The main objective of this programme is to train the next generation inproduct design and to encourage new innovative ideas.

TRIUMP 2017

Educational Visit to LIMA Exhibition 2017, Langkawi

The Sponsorship Movement 2.0 UIA & UMP Beach Cleaning


STUDENT ACTIVITIES

Engineering for Awesome Programme

ESFG Open Day


Graduate Employability Talk

Industrial Visit to Composites Technology Research Malaysia (CTRM) Sdn. Bhd., Melaka FKM Annual Dinner

Presentation of Mementos to Mobility Students

from HsKA

Trip to Kilim Geoforest Park, Langkawi Futsal Tournament at Taman Melur

FACULTY ACTIVITIES


FACULTY ACTIVITIES

Prof Dr. Rizalman as a Visiting

Professor at HsKA Germany

(January 2017)

Exchange students at HsKA Germany.

Photo session with Prof Dr-Ing Dorschner, after his

last class on Signals and Systems (March 2017)

Photo session with Prof Dr. rer. nat.

Neugebauer, after his last class on

Vehicle Electronics 2 (March 2017)

Team of Future Fuels project

involving members from Germany,

Malaysia, Iran and Canada.(May

2017)

BBQ activity of Automotive-German students at Pantai Sepat (May 2017)

Anugerah Merit Kualiti Naib Canselor (AKNC) and Anugerah Pekerja Cemerlang (APC): A Celebration of

Excellence and Achievement


Anugerah Merit Kualiti Naib Canselor (AKNC) and

Anugerah Pekerja Cemerlang (APC):

UMP FKM-HsKA

FACULTY ACTIVITIES


Visit of Institut Sains Teknologi (IST) AKPRIND Yogyakarta Delegation: Strengthening International Relation

Visit of Institut Sains Teknologi (IST) AKPRIND

Yogyakarta Delegation

BKSS (Badan Kebajikan & Sukan Staf) Activities

Inter-PTJ Sport Day

FKM Bowling Tournament2017 Hari Raya feast

FKM Adventure Based Challenge & Team Building, at Gopeng, Perak

NEW STAFF INTRODUCTORY


Dr. Mohd Jamil Bin Mohamed Mokhtaruddin

It has been my dream todo a PhD since I was in mystudies of BiomedicalEngineering degree inUniversity of Malaya. Itwas the interest tocomprehend the humanbrain that made medecide to pursue my PhDat the University ofOxford, United Kingdom.My research focuses in theunderstanding of braintissue swelling followingan ischaemic-reperfusiontreatment usingmathematical modelling.

I did my research with thePhysiologicalUnderstanding throughModelling (PUMMA)research group headed byAssoc. Prof. StephenPayne. There are several

research areas in thisgroup, which include brainstroke, neurodegenerativedisease, cerebralautoregulation, cancer,and respiration. The groupconsists of about 10 to 15PhD students andPostdoctorates. Assoc.Prof. Stephen encouragedeveryone to use availableopen-source numericalsimulations software(except Matlab) as theyare free, are extensivelyused worldwide, and alsoto cultivate theirdevelopment for the useof other researchcommunity. In addition,the group works closelywith clinical collaboratorsto explore the potentialapplications of theresearch to improve thehealthcare.

The environment inOxford had allowed me toalso gain extracurricularexperience through myinvolvement with the localcommunity in the OxfordGamelan Society led byMr. Peter Smith. Weperformed in many gigsincluding for charity,wayang-kulit show, and forformal occasion. This hastaught me to develop awork-life balance which isimportant to improvework efficiency andpersonal health.

NEW STAFF INTRODUCTORY


Dr. Muhammad Hilmi Bin Jalil

Research background -For my PhD, my study wasmainly focusing on theevaluation andcharacterization offabricating method fororthopedic polymerimplant using additivemanufacturing method.The Three-D printing waschosen as the mainfabrication method toproduce porous scaffoldand spinal cage implant.Characterization of porousscaffold was done tounderstand the effect ofporous packing method,porosity percentage andporous size of theunidirectional andcomplex porous scaffold.

Campus life - Life in Japanas a foreigner was noteasy at the beginning. The

Japanese preparatorycourses that I took 3 yearsin UNISEL had saved me alot of hassles. My PhDjourney in KyushuUniversity started in theChikushi Campus, acampus mainly forresearchers andpostgraduate students.There are also othercampuses wherepostgraduate courses areoffer such as Hakozaki, Itoand Ohashi campus. InChikushi Campus, theInterdisciplinary GraduateSchool of EngineeringSciences (IGSES) is the oneresponsible for managingpostgraduate students likeme. There are 5Department in IGSES, andone of it is theDepartment of Molecularand Material Sciences

(MMS) in which Ibelonged to.

Others experience - Thereare many things that wecould derive from theirtechnology and society.These knowledge and valuescould be adapted based onour local environment forthe benefit of Malaysia. Theopportunities to study inJapan, specifically KyushuUniversity are wide enoughfor foreigners. For example,there are the Green Asiaprogramme andMonbukagakushoScholarship that providefinancial aid for excellentforeign students who wantto advance their study inJapan. UMP itself isbecoming a distinguishedtechnology university and isoffering a wide range ofengineering courses suitablefor the latest industrydemand.


New AppointmentNAME POSITION APPOINTMENT

DR. ZAKRI GHAZALLIDEPUTY DEAN (RESEARCH AND

POST GRADUATE)13/03/2017

DR. DAING MOHD NAFIZ DAING IDRISHEAD PROGRAMME OF MASTER

BY COURSE01/05/2017

DR. MOHD HAFIZI ZOHARI HEAD OF TECHNICAL 02/03/2017

New StaffNAME GRED JOINING DATE

DR. MUHAMMAD HILMI JALIL DS51 31/05/2017

EN. MOHD JAMIL MOHAMED MOKHTARUDIN

DA41 20/04/2017

PromotionNAME GRED PROMOTION DATE

PROF. MADYA DR. WAN AZMI WAN HAZMAH DS 52 TO DS 54 08/06/2017

PROF. MADYA DR. SYARIFAH NUR AQIDA SYED AHMAD DS 52 TO DS 54 08/06/2017

DR. MOHD FIRDAUS HASSAN DS 45 TO DS 52 15/06/2017

DR. MOHD AZRUL HISHAM BIN MOHD ADIB DS 45 TO DS 52 25/04/2017

DR. NGUI WAI KENG DA41 TO DS 51 27/02/2017

DR. NURUL AKMAL BCHE LAH DA41 TO DS 51 12/01/2017

DR. AHMMAD SHUKRIE MD YUDIN DA41 TO DS 51 31/05/2017

EN. KHAIRUL AZHA A. JALAL DV29-A TO DV36-A 05/06/2017

Appointment of Visiting Professor/Lecturer/Post Doctoral

PROFESOR IR. DR. HASSAN IBRAHIM VISITING PROFESSOR, UMP 1 YEAR

DR. JIANG XIAOXIAVISITING LECTURER, NINGXIA

UNIVERSITY, CHINA1 YEAR

PROFESSOR DR. FERDINAND OLAWSKYVISITING PROFESSOR, HsKA

GERMANY 6 MONTHS

DR. MOINUDDIN MOHAMED QUAZI POST-DOCT. FELLOW, UM 1 YEAR

PROFESSOR DR. GUOQING JING

VISITING PROFESSOR, BEIJING JIAOTONG UNIVERSITY

1 YEAR

PROFESSOR DR. JUN QING LEI

PROFESSOR DR. YUPENG SHEN

PROFESSOR DR. YINGJIE WANG

PROFESSOR DR. XU WU

PROFESSOR DR. NAN ZHANG

PROFESSOR DR. LIHONG CHEN

ANNOUNCEMENTS

ANNOUNCEMENTS


Baby Birth

DR. MOHD FIRDAUS BASRAWIANAK KE -3 (PEREMPUAN, Syifa Kamilah Binti

Mohamad Firdaus)17/03/2017

DR. SAIFUL ANWAR CHE GHANI

ANAK KE -4 (LELAKI, Nafiu Ali bin SaifulAnwar)

29/03/2017

DR. MOHD AZRI HIZAMI RASIDAnak ke-3 (LELAKI, Haroun Ansori B. Mohd

Azri Hizami)12/06/2017

IR. DR. ZAMRI MOHAMED ANAK KE 4 (LELAKI, Yasra Shazil b Zamri) 11/04/2017

EN. MUHAMMAD ZUHAIRI SULAIMAN

ANAK KE 5 (LELAKI, Ahmad Arhamuddin Bin Muahamad Zuhairi)

15/03/2017

EN. MOHAMAD FAIZAL ZAHRI & DR. UMMU KHULTUM JAMALUDIN

ANAK KE 2 (LELAKI, Faqeeh Uqailah Bin Mohamad Faizal)

03/07/2017

DR. MOHD HAFIZI ZOHARIANAK KE -3 (LELAKI, Muhammad Fitri Bin

Mohd Hafizi) 17/07/2017

MarriagePUAN RAIHAN BINTI ABDUL MAJID

Spouse: Mohamad Alias bin Kamaruddin 28/01/2017

Ode to FKM Family

Thou art my family now and then,

Camaraderie flows in our vein,

Moments together of sound and bad,

O'er the times of jovial and sad

The acquaintance here shalt last long,

Thanks to thou we linger strong,

Hath vast impact unto our life,

Dwelling in Pekan - we shalt survive

For life is a journey - hast to make do,

Methinks we would make it through,

Never forsake, the perspire and pray,

FKM family is here to stay

- Dr. Azizuddin Abd Aziz

RecognitionNAME RECOGNITION

IR. DR. ASNUL HADI AHMAD PROFFESIONAL ENGINEER 2017

IR. JAMILUDDIN JAAFAR PROFFESIONAL ENGINEER 2017

issue 02 • september 2017 page 2 · 2017. 12. 6. · issue 02 • september 2017 page 3 ... times...

Documents