istam 2019 programme schedule - indian institute of technology … 2019_tentative schedule... ·...
TRANSCRIPT
ISTAM – 2019 Programme Schedule
Day 1: December 9, 2019
Time (hrs.) Event Venue
8:00 – 9:00 Registration
Community Centre
9:00 – 10:30 Inaugural Function
10:30 – 11:00 High Tea
Lecture Name Speaker Title of the Lecture Session Chair
11:00 – 12:00 Prof. P.L. Bhatnagar Memorial Lecture Prof. Guirong Liu, University of Cincinnati, Ohio Smoothed Finite Element Methods and Big-Data for Effective Simulation of Biological Systems: Soft, Fluidic, Interactive and Adaptation
Prof. P.V.S.N. Murthy, IIT Kharagpur
12:00 – 13:00 Prof. B.R. Seth Memorial Lecture Prof. S. Kapuria, IIT Delhi Wave Packet Enriched Finite Elements for Multi-field Wave Propagation Problems in Solids under Narrowband to Broadband Excitations
Prof. D. Maity, IIT Kharagpur
13:30 – 14:30 Lunch Break SMS
Time (hrs.): 14:30 – 16:30 Invited Lectures and Technical Sessions
TS-1/Venue: SMS – 219 TS-2/Venue: SMS – 221 TS-3/Venue: SMS – 115 TS-4/Venue: SBS – 004 TS-5/Venue: SBS – 017 TS-6 @ SMS – 319
Session Chair: Prof. Guirong Liu Session Chair: Prof. A. Mandal Session Chair: Prof. Sasidhar K. Session Chair: Prof. T. Raja Sekhar Session Chair: Prof. Rathish Kumar Event details Event details Event details Event details Event details Event details
Invited Lecture
Prof. M. M. Mahapatra, IIT Bhubaneswar Title of the Talk: Residual stress in structures
Invited Lecture
Prof. S.K. Mahapatra, IIT Bhubaneswar Title of the Talk: Introduction to Bio-heat transfer
SM1/ PID-71
M. Pradhan, Static Stability Investigation of a Symmetric Sandwich Beam Tapered along width and thickness
SM2/ PID-310
K. S. Shivakumar Aradhya, Vibration Characteristics of Non-uniform Curved Beams – A Finite Element Study
FM7/ PID-4
Ramesh Chandra Nayak, Experimental and theoretical investigation of natural convection heat transfer in heated vertical tubes
FM10/ PID-42
Juhi Kesarwani, A mathematical study of counter-current imbibition in oil recovery process
FM7/ PID-54
Rony Kar, Effect of Aspect Ratio of Octagonal Plan Shaped Building in Wind Interference Condition
SM1/ PID-104
P.K. Parhi, Vibration of delaminated composite plates in thermal environment
SM2/ PID-18
Ankit Malik, Void Growth in a Class of Rubber Toughened Amorphous Glassy Polymers
FM7/ PID-9
Pentyala Srinivasa Rao, Numerical study of inclined stretchable partially heated enclosure filled with nanofluid
FM10/ PID-97
Subhadra Mishra, Wave reection from a multi-step vertical porous structure with di erent porosities
FM7/ PID-56
Shanku Mandal, Effect of aerodynamic modifications on a tall building with irregularity in plan shape
FM10/ PID-14
Om Prakash Meena, Mixed convection nanofluid flow over a vertical wedge saturated in porous medium
SM1/ PID-145
Marali Hrushikesh Maharudra,
SM2/ PID-24
Shantashree Jena, Rotordynamic Analysis of High-speed Complex
FM7/ PID-12
Prasanna S. V. S. N. D. L.,
FM10/ PID-125
Ayan Chanda, Elastic bottom effect on water wave scattering
FM7/ PID-59
E. Vignesh, Entropy Generation in Natural Convection of
FM13/PID-28
Aurabinda Swain,
Effect of spew fillet on interlaminar stresses of adhesive bonded Spar-Wingskin joint
Shape Rotor used in Cryogenic Turboexpander
Estimation and stimulation of pressures on the profile of the Spillway
by two submerged thin vertical porous plates
Nanofluid inside a Square Open Cavity Having Solid Block
Effect of Marangoni and Natural convection during Laser Melting
SM1/ PID-159
D. Muniraj, Numerical investigation of functionally graded plates under low and high velocity impact loads
SM2/ PID-64
Manushi Gupta, On the propagation of harmonic plane wave under modified Green-Lindsay thermoelasticity theory
FM7/ PID-27
Jegatheesan M., Comparative study on the effect of forced convection and natural convection on nanoparticle distribution
FM10/ PID-133
S N. Gaikwad, Onset of Double Diffusive Convection in a Maxwell Fluid Saturated Anisotropic Porous Layer with Soret Effect
FM7/ PID-60
S. Gowtham, Investigation of natural convection of ferrofluid in a parallelogrammic enclosure with a heat source
FM7/ PID-39
Bairagi A.K., Slot effect of wind load on square plan shaped tall building
SM1/ PID-162
Ankita Mohanty, Joining and microstructure analysis of Aluminum sheets by Friction Stir Welding
SM2/ PID-65
Harendra Kumar, Analytical solution for thermoelastic damping in micro-beam resonators
FM7/ PID-37
N. Sitaram, Computational Investigation of Calibration Characteristics of a Nine Hole Probe
FM10/ PID-172
R. B. Kaligatla, A wave-dissipating porous breakwater in water of uneven depth
FM7/ PID-61
S Priyadharshini, Entropy Generation and Natural Convection in a Nanofluid Filled Square Cavity Having Heat Generating Solid Body
FM13/PID-82
S.Shankar Narayan, Study of behavioural change in blood flow from Non-Newtonian to Newtonian
SM1/ PID-167
Raj B. Bharati, Free vibration of rotating laminated composite structures using Carrera Unified Formulation
SM2/ PID-66
D. Pandit, Simulation of Pseudo-elastic Effect in A Shape Memory Alloy Beam
FM7/ PID-41
Kamala Kumar Pradhan, Boundary layer flow of nanofluid over a continuous moving plate with the effect of electrification of particle
FM10/ PID-192
Santanu Koley, Flow Through Porous Media Multidirectional irregular waves scattering by trapezoidal porous breakwater
FM7/ PID-62
Pradeep Kumar Behera, Computational Investigation of Flow in 2 Dimensional Turbine Cascade
SM4/ PID-105
Arpita Das, Elastic behaviour of nano composite cemetitious material using various nanopolymer
SM1/ PID-260
Ankita Mohanty, Joining of Aluminum sheets by Friction Stir Welding and microstructure analysis
SM2/ PID-67
Om Namha Shivay, An investigation of the Moore-Gibson-Thompson thermoelasticity theory
FM7/ PID-45
Manish Desai, Computational Investigation of Effect of Hole Angle on Calibration Characteristics of a Seven Hole Probe
FM10/ PID-224
Tapan Kumar Hota, Effects of Viscosity Profiles on Localized Miscible Fluid in a Porous Media
FM7/ PID-63
Surabhi Nishad, EFGM simulation of Natural Convection within a Wavy Square Enclosure with line heat source filled with nanofluid
SM8/ PID-111
Dev Kunwar Singh Chauhan, Tracking of Special Objects with Parallel Manipulator using Inverse Kinematics Approach
SM3/ PID-16
Sanjukta Das, Controllability of a nonlocal impulsive stochastic damped second-order delay differential equation
SM2/ PID-69
Robin Vikram Singh, An investigation on strain and temperature rate-dependent thermoelasticity and its infinite speed behavior
FM7/ PID-46
Arghyadip Das, Effect of Changing Aspect Ratios on Corner Recessed Square Tall Building under Wind Excitation
FM10/ PID-259
Santanu Koley, Multidirectional irregular waves scattering by trapezoidal porous breakwater
FM7/ PID-70
Hitesh Kumar Sinha, Aerodynamic Analysis of Helium Lubricated Gas Foil Journal bearing
SM3/ PID-182
Jayant Prakash Varun, Modal analysis and active vibration control of laminated graphite/epoxy
SM2/ PID-74
A. K. Jha, Thermoelastic analysis of rotor
FM7/ PID-47
Rahul Venkatesan, Effect of Flow Control Devices in modified Axisymmetric Hypersonic
FM10/ PID-285
Siddabasappa C, Effect of Local Thermal Non-Equilibrium in temperature
FM8/ PID-165
Garima Varshney, Numerical Simulation of Vapour Bubble Ebullition from Discrete Cavity during Pool Boiling
Time (hrs.) Event Venue
16:30 – 16:45 Tea Break SMS/SBS
17:30 – 18:30 Lecture Name Speaker Chairperson
Community Centre Prof. A.S. Gupta Memorial Lecture Prof. B.V. Rathish Kumar, IIT Kanpur
Prof. Jitesh Gajjar
Day 2: December 10, 2019 (Tentative)
Time (hrs.): 9:00 – 11:00 Invited Lectures and Technical Sessions
TS-7/Venue: SMS – 219 TS-8 @ SMS – 221 TS-9 @ SMS – 115 TS-10 @SMS – 319 TS-11 @SBS – 004
Session Chair: Prof. B. Pattabhi Ramaiah Session Chair: Prof. M. M. Mahapatra Session Chair: Prof. Yogesh Bhumkar Session Chair: Prof. P.K. Parhi Session Chair: Prof. Vasudev Rao Allu
Event details Event details Event details Event details Event details
Invited Lecture 6
Prof. Title of the Talk:
Invited Lecture 7
Prof. V. Pandu Ranga Title of the Talk:
Invited Lecture ed L ecture 8
Prof S.V. Raghurama Rao, IISc Title of the Talk: A CFD algorithm for ideal, real and dense gas flowstle of the Talk:
Invited Lecture 9
Prof. Title of the Talk:
Invited Lecture vited Lecture 10
Prof. Rajendra Kumar Ray Title of the Talk: Structrual bifurcation analysis of Shear Flow bullf bodies
SM5/ PID-140
S D Raiyani, Experimental Study on Torsional Strengthening of RC Flanged Beam using Stainless Steel Wire Mesh
SM6/ PID-68
C. Arvind, Prediction of Crack Formation in applications involving Mechanical Structural Elements using Taylor's Series
FM7/ PID-175
H.P. Rani, Aspect ratio effects of left heated 2D Lid driven Cavity using Energy streamlines
SM2/ PID-95
Anirban Akhuli, Robust cost optimization of shallow foundation with uncertain-but-bounded type parameters
FM13/ PID-181
Motahar Reza, Numerical Experiment on H-Type Fin and Tube Heat Exchanger by Passing Coolant through the Tubes and blowing colder air across Fin
SM5/ PID-150
Ankita Mohanty, Theoretical and theoretical and experimental study of drill bit dynamics
SM6/ PID-122
Vishwanil Vishwanath Sarnaik, Effect of stacking sequence and hybridization in Lap shear joint made with laminated composite materials
FM7/ PID-176
H.P. Rani, Unsteady Rotating Fluid Flow past a Vertical Cylinder under Influence of uniform Magnetic Field
SM2/ PID-113
Sourav Banerjee, Static Bending Analysis of Micro-sized Euler-Bernoulli and Timoshenko Beam with Modified Couple Stress Theory
FM13/ PID-20
Eadala Sarath Yadav, Relay Based identification and control of SISO process –An experimental approach via conical tank
SM5/ PID-157
Sunil Manohar Maharana, Impact of Layering Sequence and Nanofiller Reinforcement on the Mechanical and Interlaminar Fracture Toughness
SM6/ PID-163
Umed Singh, Failure analysis of quasi-brittle materials using cohesive zone model assisted XFEM
FM7/ PID-187
Subhashree Panda, Boundary Layer Flow Of Nanofluid Over A Moving Plate With Viscous Dissipation And Electrification Of Particles
SM2/ PID-119
Ravi Jangid, A Finite Element Study on Buckling of Thin Walled Steel Hollow Sections Using Geometric and Material Nonlinearity
FM13/ PID-25
Panduranga K., Hypersingular integral equation approach for submerged flexible membrane in finite water depth
SM5/ PID-263
Ankita Mohanty, Theoretical and Experimental Study of Drill Bit Dynamics
SM6/ PID-164
Aakash Soni, Crack Propagation Study in a Cortical Bone Using Extended Isogeometric Analysis
FM7/ PID-209
Ram Prakash Sharma, Heat and mass transfer effect of MHD rotating fluid past a vertical surface with variable thermal conductivity
SM2/ PID-123
Suman Pal, Axisymmetric free vibration behaviour of BFGM rotating micro-disk based on modified couple stress theory
FM13/ PID-36
Amandeep Kaur, An algebraic least square method for the solution of diffraction of water waves by a series of two asymmetric trenches
SM5/ PID-282
K. Rishwanth, Analysis of glass fiber reinforced epoxy based composite repair systems in the repair of corroded steel pipelines
SM6/ PID-220
Pankaj P. Desai, Inverse Problem of Beam with Inclined Edge Crack
FM7/ PID-216
Sri Ramya, Analysis and stimulation of flow over stepped sipllways using ANSYS-CFD
SM2/ PID-128
S. S. Godara, Effect of interface on Hybrid Nano Composites
FM13/ PID-58
S. Chakraborty, Weakly nonlinear stability analysis for a salt-finger convecting layer
SM5/ PID-287
P. Nitheesh Kumar, Design and Development of a repair methodology for the live repair of through thickness corrosion/leaking defects
SM6/ PID-228
Ajinkya R. Dusane, Crack growth studies in laminated composites using coupled cohesive zone and phase field approach
FM7/ PID-217
G. Krishna Veni, A RBF based partition of unity method for unsteady incompressible viscous flows
SM2/ PID-138
K. Udaya Bhaskara Reddy, Strain energy based and Frequency based topology optimization of laminated composite
FM13/ PID-134
M. A. Rawoof-Sayeed, Finite Amplitude Cellular Convection under the Influence of a Vertical Magnetic Field in Liquid Gallium
SM5/ PID-289
Y. Subbalakshmi Accelerated environmental assessment of polymeric composite material used to repair pipelines
SM6/ PID-230
S.D.V.S.S. Varma Siruvuri, Studies on influence of cracks on the performance of photovoltaic solar cells: MD simulations
FM7/ PID-234
Bapuji Sahoo, Higher Order Compact Scheme for Flow Past a Spinning Higher Order Compact Scheme for Flow Past a Spinning
SM2/ PID-142
Geetha L., Performance prediction of GGBFS modified concrete bridge using ANSYS
FM13/ PID-141
M. K. Chaube, Effect of electro-osmotic slip velocity on flow of a micropolar fluid through a flexible tube
SM5/ PID-309
Amruta Ranjan Behera, Experimental demonstration of the super stable second mode excitation in buckled micro-beams
SM6/ PID-240
Ranjan K. Behera, Effect of combined tensile-torsional loads on the structural integrity of adhesively bonded curved laminated FRP composite single lap join
FM7/ PID-276
Shalini Singh, Higher Order Compact (HOC) Solution For Solute Transport Along and Against the Groundwater Flow
SM2/ PID-146
Manash Malik, Free flexural vibration analysis of rotating nano-beam using non-local theory
FM13/ PID-158
D. M. Surwase Soret Effect on the Onset of Convective Instabilities in Binary Nanofluids with fast Chemical Reaction
SM6/ PID-19
Md Intaf Alam, Effect of crack tip shape on fatigue crack growth in plastically compressible hardening solids
SM3/ PID-223
K. K. Bera, Active control of futter of a cable-stayed bridge using winglets
FM7/ PID-77
Sukanya Padhi, Implicit finite difference solution of MHD flow analysis of a second grade fluid over a linearly stretching sheet
SM2/ PID-148
Surya Dutta Aravapalli, Robust design optimization of underground concrete tunnel subjected to seismic excitation.
FM14/ PID-38
Natasha Sharma, Far - from - equilibrium stochastic bidirectional transport systems with constrained entrances
Time (hrs.) Event Venue
11:00 – 11:15 Tea Break SMS/SBS
Time (hrs.): 11:15 – 13:30 Technical Sessions
TS-12 @ SMS – 219 TS-13 @ SMS – 221 TS-14 @ SMS – 115 TS-15 @ SBS – 004 TS-16 @ SMS – 319
Session Chair: Prof. P.K. Mahato, IIT (ISM) Session Chair: Session Chair: Prof. S. N.Panigrahi Session Chair: Prof. Sunanda Saha, Dayananda Sagar University
Session Chair:
Event details Event details Event details Event details Event details
SM2/ PID-178
Bhakti N. Patel, Post-buckling involving large deflection of micro-cantilever using the consistent couple stress theory
SM8/ PID-7
Unnikrishnan S. Nair, Stability of steady frictional sliding at an interface between viscoelastic solids
SM2/ PID-83
Ajeyo Mukherjee, On some aspects of stress distribution scenario within the earthen dams under static loading condition
FM7/ PID-49
Amlan Kumar Bairagi, Comparative study of power spectra between square and setback building due to wind load
SM8/ PID-112
Viswas Andrews, Design and Development of Flapping Wing Dynamic Simulator
SM2/ PID-190
Tripuresh Deb Singha, Free vibration characteristics of pretwisted FGM sandwich conical shells in thermal environment
SM8/ PID-85
Gudlavalleti V V S Vara Prasad, Magneto-elastic effects in non-Newtonian ferrofluid droplet impact
SM2/ PID-90
Pankaj Chauhan, Estimation of Elastic moduli of defective Multi-walled Carbon Nanotubes by Finite Element Approach
FM7/ PID-50
Gayathri Bolugoddu, Computational Investigation of Effect of Hole Angle on Calibration Characteristics of a Five Hole Probe
SM8/ PID-132
A. Srivastava, Influence of viscoelasticity on reflection of three dimensional plane waves in highly anisotropic medium
SM2/ PID-191
Shashank Pandey, Bending Analyses of Skew Laminated Composite Plates using a Higher-Order Layerwise Theory
SM8/ PID-86
Machha Rajesh, Pulse controlled engine
SM2/ PID-91
R. Lalthlamuana, Updating model parameters of a bridge using heterogeneous field test data
FM7/ PID-53
Pritam Majumder, Significance of Duct Position in Combine Effect of Propeller Boss Cap Fin (PBCF) and Propeller Duct to Improve Efficiency
FM12/ PID-152
Raghunath Patra, Thermal Transport of Elecyromagnetohydrodynamic flow of Casson-nano fluid through a Porous Microtube under the effect of Streaming Potential
SM2/ PID-195
Kavikant Mahapatra, Effect of Coupling Conditions on the Vibration Characteristics of an L-Shaped Built-up Isotropic Plate Structure
SM8/ PID-107
B.K Tiwari, Mechanics Driven Simulation Based Design and Analysis of Variable Buoyancy System for Depth Control of AUVs
SM2/ PID-151
Rakesh Dangal Deore, A Computational (FEM) Analysis of Single Point Incremental Forming (SPIF) of a Steel Alloys Using Roller Ball Tool
FM7/ PID-80
Sarvalogapathi. S., Numerical study on flow past circular cylinder with strakes
SM2/ PID-173
Prashant Kumar Choudhary, Thermal buckling analysis of laminated composite plates containing an elliptical cutout
SM2/ PID-214
Pradeeptta Kumar Taraphdar, Evaluation of through-thickness residual stresses in narrow gap dissimilar weld joint of ferritic to austenitic stainless steels
SM8/ PID-124
Narendra Kumar Kolla, Design and Development of Dual Arm Mobile Robotic Platform for Warehouse Applications
SM2/ PID-154
Pankaj Chauhan, Estimation of Elastic moduli of defective Multi-walled Carbon Nanotubes by Finite Element Approach
FM7/ PID-298
Gayathri M., Effects of Magnetic Field and Internal Heat Generation on Triple Diffusive Convection in an Oldroyd-B Liquid
SM5/ PID-180
Saibal Kanchan Barik, Effect of impact loading on the deformation behaviour of AA 5052-H32 sheet
SM2/ PID-222
Royal Madan, Stresses and limit elastic speed of P- FGM rotating disks
SM8/ PID-170
R. Yogeshwar Rao, Motion planning of serial manipulator using pseudoinverse Jacobian method
SM2/ PID-174
Abhishek Mishra, A DML based artificial neural network approach to solve transient wave equations using the collocation method
FM7/ PID-299
Sumana Krishna Prasad, Numerical Solution of MHD Nanofluid Flow over a Permeable Stretching Sheet using Haar wavelets
SM5/ PID-185
Saibal Kanchan Barik, High velocity forming behaviour of metallic sheet thorugh impact loading using a shock yube
SM2/ PID-235
Ramit Ashutosh Machhan, Investigation of different types of damping effects for automotive components –Preliminary work
SM8/ PID-179
Rohan Vailala Thoma, Design and development of mobile manipulator for space application
SM2/ PID-256
Kuldeep Sharma, Distributed Dislocation Technique for Study of Modified Polarization Saturation Models in Finite Piezoelectric Media
FM7/ PID-300
Acha C. S., Numerical Solution of MHD Stagnation Point Casson Fluid Flow with Partial Slip using Haar wavelets
FM6/ PID-225
D.Siva Krishna Reddy, Numerical Prediction of aerodynamic and Magnus coefficients of a supersonic spinning artillery projectile
SM2/ PID-251
Shivam Sharma, Deep machine learning approach for the design of smart interphase in nacre-like structures
SM8/ PID-193
T.Siddharth, Development of prosthetic knee joints for developing countries: a review
SM2/ PID-265
Chellapilla Kameswara Rao, Torsional Buckling of Thin-Walled Beams of Open Section Resting on Variable Winkler Foundation
FM10/ PID-227
Rashmi Dubey, The onset of double-diffusive convection in a fluid-saturated inclined porous layer with permeable boundaries
SM2/ PID-252
Rajneesh Awasthia, Optimisation studies of piezoelectric energy harvester using deep machine learning
SM8/ PID-257
S. Deepak Kumar, Development of a 6-DOF Parallel Robotic Cell
SM2/ PID-254
Srinivasu Chadaram, Evaluation of stress intensity factors (SIF) for elliptical crack in Piezoelectric material (PZT-5H) using XFEM
FM10/ PID-305
B.Mallikarjun, A study of Cu/Ag nanoparticle based heat transfer augmentation in Darcy Brinkmann Forchheimer flow in square cavity
Time (hrs.) Event Venue
13:30 – 14:30 Lunch Break SMS
Time (hrs.): 14:30 – 16:30
Technical Sessions
TS-17 @ SMS – 219 TS-18 @ SMS – 221 YSAS @ SMS – G22 TS-19 @ SBS – 004 TS-20 @ SMS – 319
Session Chair: Session Chair: Session Chair: Session Chair: Session Chair:
Event details Event details Event details Event details Event details
SM2/ PID-267
N. V. Swamy Naidu, Buckling analysis of FG circular columns based on Weak finite element formulation
SM6/ PID-26
S. K. Panda, Adhesion failure resistance techniques in T-type composite joints
SM7/ PID-8 Mriganka Shekhar Chaki,
Anti-plane waves in piezoelectric materials with surface elasticity
FM7/ PID-246
Subharthi Sarkar, Influence of magnetic field in controlling Taylor Column in the slow translation of a sphere in a rotating fluid
SM7/ PID-226
Apurba Das, Natural frequencies of porous exponential functionally graded conical shell under rotation
SM2/ PID-272
Aswathy M., Stochastic meshless method for Euler-Bernoulli beams with spatially varying Young’s modulus
SM6/ PID-30
Shushant Singh., Effect of crack tip radius on fatigue crack radius growth in plastically compressible hardening solids
FM7/ PID-32
S.Anitha, Heat transfer capability of CNT-TiO2 /water hybrid nanofluid flowing in cylindrical tube
FM7/ PID-248
D. Siva Krishna Reddy, Computational studies of mixing process in domestic cooking LPG stove
SM6/ PID-229
Alok Negi, Modeling size effects in quasi-brittle materials using a smoothed stress-based localizing gradient damage model
SM2/ PID-290
Arya Prakash Padhi Phase Field Topology Optimization Considering Geometric Nonlinearity
SM6/ PID-44
Vaibhav Sonkar, XFEM Simulation of Cracked 3D Domain Graded in Parallel and Perpendicular Direction
SM7/ PID-114
Kaustav Bakshi, A Nonlinear Finite Element Failure Study of Laminated Composite Cylindrical Shell Panels
FM7/ PID-262
Subhashree Panda, Boundary Layer Flow Of Nanofluid Over A Moving Plate With Viscous Dissipation And Electrification Of Particles
FM7/ PID-293
Maria Anncy S., Study of Linear and Non-linear Analysis of Suction-Injection-Combination on the onset of Rayleigh-Bènard-Chandrashekar convection in a Micropolar Fluid over a Porous Medium
SM2/ PID-297
K. S. Shivakumar Aradhya, Vibration Characteristics of Non-uniform Curved Beams – A Finite Element Study
SM6/ PID-284
Nitheesh Kumar P., Failure Analysis of Composite Repair of Corroded Steel Pipelines subjected to Cyclic Loading
FM4/ PID-186
A Karthik, Statistical Analysis of the Mathematical Models for Blood Flow in Arteries
FM7/ PID-268
Chandan Kumar, Flow Analysis Over Supercritical Airfoil with and without Slotted Flap
SM2/PID-307
Rupinderjit Kaur, Infuence of irregular geologies and inhomogeneity on SH-wave propagation
SM6/PID-286
P Nitheesh Kumar, Failure analysis of composite repair of through thickness corrosion/leaking defects in corroded steel pipelines subjected to short term static pressure loading
FM7/ PID-275
Ansa Mathew, Effect of double-frequency gravity modulation on the onset of Rayleigh-Bénard convection
FM7/ PID-269
Rajdip Paul, Wind Effects on Cross Plan Shaped Tall Building
SM2/ PID-308
Ansuman Padhi, Comparative study of mechanical behaviour of Basalt fibre reinforced sandwich composites
SM3/ PID-266
R. Suresh Kumar, Active Damping of Laminated Composite Cylindrical Panels Composed of Fuzzy Fiber Reinforced Composite layers
FM7/ PID-278
Neha Aanam A, Study thermorheological and magnetorheological effects in a ferrofluid with roatation modulation
FM7/ PID-57
Prasanna S. V. S. N. D. L., Evaluation and simulation of minor losses using ANSYS-CFD
SM2/ PID-315
Vaishali, Radial basis function based probabilistic dynamic stability of doubly curved shells
SM4/ PID-253
Sumit Kumar Vishwakarma, Love wave dispersion in an inhomogeneous Earth’s crust lying over a pre-stressed inhomogeneous mantle
FM13/ PID-279
Sushma T. S., Study of Rayleigh- Bernerd Brinkmann convection in enclosures using center manifold theory
FM7/ PID-283
Mohammad Athar Khan, Effect of thermal buoyancy on vortex induced vibration of square cylinder
FM2/ PID-247
D. Siva Krishna Reddy, CFD Studies of Rocket Nozzle Flows with Supersonic Film Cooling
FM7/ PID-291
S. Pranesh, Linear and non-linear analyses of sinusoidal and non- sinusoidal time dependent Coriolis force modulation on the onset of triple-diffusive convection
FM10/ PID-280
Lakshmi K. M., Regular and chaotic convection of hybrid nanoliquid confined in low-porosity cylindrical enclosures
FM7/ PID-281
Meghana J., Effect of Sinusoidal and non-Sinusoidal Gravity modulation on Rayleigh-Bénard Ferroconvection in Couple Stress Fluid
Time (hrs.) Event Venue
16:30 – 16:45 Tea Break SMS/SBS
17:00 – 18:00 Lecture name Speaker Chairperson Community Centre
Prof B. Karunes Memorial Lecture Prof Rama Govindarajan, International Centre for Theoretical Sciences, TIFR
Prof. Jitesh Gajjar
Day 3: December 11, 2019 (Tentative) Time (hrs.): 9:00 – 11:00
Invited Lectures and Technical Sessions
TS-21 @ SMS – 219 TS-22 @ SMS – 221 TS-23 @ SMS – 115 TS-24 @ SBS – 004 TS-25 @ SBS – 017
Session Chair: Prof. P. Rath Session Chair: Session Chair: Prof. D. Maity Session Chair: Session Chair:
Event details Event details Event details Event details Event details
Invited Lecture
Prof. Suman Chakraborty, IIT Kharagpur Title of the Talk: Phase-field Modelling and CFD
Invited Lecture
Prof. Amit Agrawal, IIT Bombay Title of the Talk: Quest for Equations beyond the Navier-Stokes
Invited Lecture
Dr. B. Santosh, VSSC, ISRO, Trivandrum Title of the Talk: Evolution of Composite Structures for Launch Vehicles
FM8/ PID-29
Subhakanta Moharana, Mathematical Modelling of Single and Multiple Bubbles during Boiling
FM1/ PID-48
Thillaikumar T., Experimental Studies on the Thrust Vector Control of a Supersonic Nozzle using Struts
SM4/ PID-31
S. Satpathy, Three dimensional modal analysis and prediction of fatigue life of a connecting rod
FM7/ PID-81
Sumit Kumar Saha, Effect of guide vane on Dean Vortex for single-phase turbulent flow through 90 degree pipe bend
FM7/ PID-155
Rojalin Pattnaik, Effect of electrification of nanoparticles on the flow and heat transfer over an exponentially stretching surface
FM8/ PID-130
Anjanna Matta, Double diffusive convection in a horizontal porous layer with e ect of variable gravity and internal heat source
FM1/ PID-118
J. Naresh, Aeroelastic flutter analysis of sandwich panel in thermal environment
SM4/ PID-101
Vanita Sharma, Effect of micropolarity on propagation of SH-waves in an elastic layer overlying micropolar substrate
FM7/ PID-92
Vaibhav Rastogi, Numerical Investigation of the Flow Parameters inside a Tunnel when a High Speed Train is passed through it
FM7/ PID-158
Samarendra Panda, Effect of Strouhal number on the flow field of Synthetic Jet
FM8/ PID-169
Rajiva Lochan Mohanty, Prediction of Vapor Bubble Departure Diameter during Pool Boiling using ANFIS
FM1/ PID-10
Dr. Twinkle, Solution of Non-linear Partial Differential Equation Arising in Porous Media in Horizontal Direction By Combination of Elzaki Transform and Adomian Decomposition Method
SM4/ PID-147
Gaurav Mittal, A well posed problem of fractional thermoelasticity with finite wave speed
FM7/ PID-108
Siddhartha Sankar Das, Numerical investigation of effect of inlet temperature on hydrodynamic properties and convective heat transfer
FM7/ PID-166
Rajendra K. Ray, A Numerical Study of Forced Convection from a Circular Cylinder with Time Periodic Pulsating Temperature
FM10/ PID-311
D. Srinivasacharya, Linear Stability of Mixed Convection in a Vertical Channel Filled with Nanofluid Saturated Porous medium
FM1/ PID-22
Ankush Raje, Unsteady MHD flow and heat transfer of immiscible micropolar and Newtonian fluids through a circular pipe filled with porous medium
SM4/PID-188
Md Abul Kashim Molla, Time-Fractional Generalized Thermoelasticity Formulation for Two-Temperature Three-Phase-Lag Model: An Application to Viscoelastic Medium with Spherical Cavity
FM7/ PID-115
Md. Reyaz Arif, Effect of cylinder inclination and heating on mixed convective flows past a square cylinder using non-Boussinesq model
FM11/ PID-249
V.R.K.Reddy, Necessary conditions for spatial inviscid instability in sea straits with arbitrary cross-sections
FM11/ PID-51
Lopamudra Das, Interaction of waves with an immersed sphere in a sea with flexible bottom surface
FM12/ PID-11
Dharmendra Tripathi, Electroosmotic flow of Hybrid Nanofluids in asymmetric microchannel with Low Reynolds number
SM4/ PID-197
V. R. Manthena, Thermoelasticity of a functionally graded rectangular plate with internal heat generation
FM7/ PID-121
Debasish Kumar Aerodynamic behaviour of cross plan shaped tall buildings under wind load – A Numerical Approach
FM13/ PID-255
Ch.Divya, Effect of mathematical model on optimization of process parameters using genetic algorithm in turning process
FM11/ PID-52
Sagarika Khuntia, Wave diffraction by a small base deformation on a flexible bed in an ice-covered fluid
FM12/ PID-87
Tarun Kumar Dey, Study of bulk viscosity and shear viscosity of two component fluids
SM4/ PID-198
N. K. Lamba, Hygrothermoelastic response of a finite hollow circular cylinder
FM7/ PID-127
P. Gokulavani, Natural convection in a ventilation cavity with protruding object
FM13/ PID-274
Uppara Manjula, Real hypersurface of a nearly Kaehler manifold
FM11/ PID-171
Manjari Sidharth, Transient fexural gravity wave motion on a permeable bed in three dimensions
FM12/ PID-88
Anjana Kumari, Theoretical study of surface property of Lennard-Jones fluids
SM4/ PID-199
S. D. Warbhe, Fractional order theory of thermal stresses in a simply supported late with thermal bending moments
FM7/ PID-137
G. Srinivas, Linear Stability Analysis of Electrothermoconvection in a Rotating Plane Layer
FM12/ PID-102
Mukesh Kumar Sinha, Differential Cross- Section of e+ - He+ Scattering
FM11/ PID-221
Satyanarayana Badeti Influence of an axial velocity on a linear Ekman boundary layer
FM12/ PID-99
Gunsagar Yadav, Influence of acoustical character of nano ferro -fluids
SM4/ PID-200
Jyoti Verma, Time fractional hygrothermoelastic problem for a hollo cylinder subjected to constant heat and moisture flux
FM7/ PID-139
Satadru Bhattacharya, Effect of Wind Load on Regular and Irregular Plan Shaped Building
FM12/ PID-109
Brahma Nand Jha, Study of Semiconductor devices simulation using numerical methods
FM11/ PID-236
A.K. Mohapatra Effect of sea bed profiles on the wave interaction of a horizontal submerged plate attached to a vertical wall
FM13/ PID-250
Rahul R., Mathematical Modeling of Drug Dynamics in Arterial Drug-eluting stent
SM4/ PID-201
N. J. Wange, On fractional order temperature distribution in a multilayer composite hollow sphere with internal hear source
FM7/ PID-78
Rajdip Paul, Wind Effects on Cross Plan Shaped Tall Building
FM1/ PID-292
Sushil Kumar Singh, Aerofoil-turbulence noise reductions using non-uniform wavy serrations
Time (hrs.) Event Venue
11:00 – 11:15 Tea Break SMS/SBS
11:45 – 12:45 Lecture Name Speaker Chairperson Community Centre Prof. G.I. Taylor Memorial Lecture Prof. Jitesh Gajjar, University of Manchester, UK Prof. T.V.S. Sekhar
13:30 – 14:30 Lunch Break SMS
Time (hrs.): 14:30 – 16:30
Invited Lectures and Technical Sessions
TS-26 @ SMS – 219 TS-27 @ SMS – 221 TS-28 @ SMS – 115 TS-29 @ SBS – 004 TS-30 @ SBS – 017
Session Chair: Prof. S. K. Mahapatra Session Chair: Prof. D.K. Maiti Session Chair: Prof. M.M. Mahapatra Session Chair: Session Chair:
Event details Event details Event details Event details Event details
Invited Lecture
Prof. Rudra Pratap, IISc Bangalore Title of the Talk: Residual Stress Modulated Distinctions in the Dynamics of Microresonators
Invited Lecture
Dr. N. K. Sura Scientist F, ADA, Bangalore Title of the Talk: Autopilot for High Performance Aircraft: Design, Development, Evaluation and Testing
Invited Lecture
Dr. Kamal Sharma, BARC, Mumbai Title of the Talk: Application of Ball Indentation Technique for Mechanical Property Estimation of Nuclear Power Plants Material
SM4/ PID-202
G.D. Kedar, Effect of Rosenthal heat source in a thermoelastic plate in time fractional heat conduction context
SM7/ PID-13
Madhumita Mohanty, Dynamic stability analysis of a rotating symmetric sandwich beam subjected to axial pulsating load
SM7/ PID-94
Ajeesh C., Experimental and numerical free vibration analysis of laminated composite shells
FM5/ PID-15
K. Choudhury, Heat and Mass Transfer in Three Dimensional Flow through a Porous Medium with Periodic Permeability
FM4/ PID-35
R. Ponalagusamy, Computational Model on Pulsatile Electro-Magneto Hydrodynamic Blood Flow in a Balloon Catheterized Arterial Stenosis
SM4/ PID-203
V. B. Srinivas, Heat conduction and thermal stresses of a thermosensitive rectangular plate with internal heat generation
SM7/ PID-17
Nipu Modak, Experimental and finite element investigation of carbon fiber reinforced composites
SM7/ PID-116
Tapas Ranjan Panigrahi Love wave dispersion in an earth’s crust lying over a pre-stressed mantle
FM5/ PID-79
P. Ragupathi, Numerical study on the rotating flow of Casson- Carreau fluid
FM4/ PID-43
Abhisek Gupta, Mechanical response of different types of scaffolds for biomedical application
SM4/ PID-204
N. P. Gaikwad, LRS Bianchi Type II Cosmological Model with Bulk Viscous Fluid in Rosen’s Gravity
SM7/ PID-23
Tanushree Dalai, Experimental and Numerical Studies on Free Vibration of Natural Fiber Laminated Composite Plates
SM7/ PID-135
Bablu Kumar Jha, Electro-elasto-static analysis of Laminated Piezoelectric Energy Harvester Composed of Composite Beam Substrates
FM5/ PID-106
S. Talukdar, Transient MHD Casson fluid flow past an inclined surface
FM4/ PID-84
G. Manoj Kumar, Thermal modelling of human cornea and its experimental validation
SM4/ PID-205
P. R. Dhongle, Bianchi Type I String Dust Model with Magnetic Field in Stationary Space-Time
SM7/ PID-34
Swagatika Behera, Experimental and Numerical Studies on Dynamic Behavior of Laminated Composite Plate with Cut-Out
SM7/ PID-143
S K Panda, A Review on Piezoelectric Actuators and Piezocomposite Structures
FM5/ PID-117
Pankaj, Higher Order Compact Simulation of Unsteady Natural Convection In a Square Cavity with Bottom Undulations
FM4/ PID-149
Vaibhavsingh S. Varma, Human muscle activity observations for predefined biped kinematics using musculoskeletal simulator
SM4/ PID-206
M.S. Borkar, LRS Bianchi Type-II Cosmological Model with String Bulk Viscous Fluid and Magnetic Field in Barber’s Second Self Creation Theory
SM7/ PID-40
Kamala Kumar Pradhan, Boundary layer flow of nanofluid over a continuous moving plate with the effect of electrification of particle
SM7/ PID-168
Anil K. Vashishth, Reflection and transmission of olane waves at an interface between Piezo- thermoelastic solid and porous Piezo- thermoelatic solid media
FM5/ PID-156
Motahar Reza, Soret and Dufour effects on entropy generation for 𝐴𝐼𝑁 𝑎𝑛𝑑 𝐴𝑙2𝑂3 Hybrid Nanofluid Flow over past a stretching sheet in porous media
FM4/ PID-184
Md. Hasan, Effect of arterial constitutive models on blood flow characteristics in aortic bifurcation using one dimensional wave
SM4/ PID-207
S. S. Charjan, Viscous fluid string Cosmological model with term in Bimetric theory of gravitation
SM7/ PID-55
Y. Sharath Chandra Mouli, Low-velocity impact behaviour on in-house prepreg made composite laminates
SM7/ PID-196
Sayan Roy, A Study on Flexural Rigidity of Hexagonal Honeycomb Sandwich Structures using Finite Element Analysis
FM5/ PID-213
Chandra Shekara G, Study of Finite amplitude instability of double diffusive time –dependent flows in a fluid layer
FM4/ PID-219
Sriram Mahitha, Behaviour of stem cells and substrates under mechanical stimuli – a finite element approach
SM4/ PID-208
L.C. Bawankar, Generalized magneto- thermoelastic problem with thermosensitive material properties
SM7/ PID-73
A. Pradhan, An ABAQUS plugin to generate RVE with random fibre arrangement and estimation of effective properties
SM7/ PID-227
Ajinkya R. Dusane, Crack growth studies in laminated composites using coupled cohesive zone Crack growth studies in laminated composites using coupled cohesive zone
FM5/ PID-215
Golam Mortuja Sarkar, Stability analysis of non-Newtonian boundary layer flow with partial slip
FM4/ PID-237
Rajnandini Das, Development and Application of metamaterials
SM4/ PID-210
P.V. Gayakwad, Bulk Viscous Bianchi Type I Barotropic Fluid Cosmological Model with Varying Λ and Functional Relation on
SM7/ PID-76
Yathish Muddappa P.P., Vibration and Buckling behavior of Interlaminar Hybrid Fiber Metal Laminate
SM7/ PID-242
Ujwal Shende, An analysis of Surface Wave like Modes in Lamb Wave Propagation for Plates of
FM5/ PID-218
Suman Sarkar, Existence and Uniqueness Result of Nonlinear Boundary Value Problem Arising Due to Hiemenz
FM4/ PID-295
Ankush Pratap Singh, Finite element analysis for evaluation of post implant axial loading condition of femur fracture fixation plate made of
Hubble Parameter in Bimetric Theory of Gravitation
subjected to uniaxial compressive load
Fiber-Reinforced Functionally Graded Material
Flow with Slip Boundary Conditions
shape memory alloy for optimum healing
SM2/ PID-261
Shafee. P. P., A finite element study of flexible pavement : an attempt towards application of ldpe in road construction
SM7/ PID-93
Subham Patra, Effect of fibre orientation on the free vibration characteristics of laminated composite plates
SM8/ PID-288
K. Deepak, Design and development of a Pick and place manipulator as a part of Rubber Ply Handling System for Green Tyre Manufacturing Process
FM4/ PID-303
Dr. Nidhi S Vaishnaw, Stability analysis of mathematical model for depression in young women students
FM1/ PID-302
Jithin P. N., Numerical studies on the height stability of a shape optimized NACA 0012 In- GroundEffect
Time (hrs.) Event Venue
16:30 – 16:45 Tea Break SMS/SBS
Time (hrs.): 16:45 – 18:15 Technical Sessions
TS-31 @ SMS – 219 TS-32 @ SMS – 221 TS-33 @ SMS – 115 TS-34 @ SBS – 004 TS-35 @ SBS – 017
Session Chair: Session Chair: Session Chair: Session Chair: Session Chair:
Event details Event details Event details Event details Event details
SM7/ PID-264
Dona Chatterjee, First Ply Failure Analysis of Laminated Composite Skew Plates Using ANSYS
FM5/ PID-258
Gangamani, H.V., Nanofluid flow Model over a Stretching Sheet using DTM-Pade Approximation
FM7/ PID-239
Pooja Gupta, Solution of Riemann problem for non-ideal magnetogasdynamic flow
FM9/ PID-9
Ramesh Chandra Nayak, Validation by theoretical with experimental results for heat transfer from the internal surface of vertical tubes having with and without internal rings
Reserved
SM7/ PID-271
Abhirami A J, Analysis of Failure Modes in a Unidirectional Bio-inspired Regular Staggered Composite
FM5/ PID-270
Debasish Kumar, Aerodynamic behaviour of two cross plan shaped tall buildings
FM7/ PID-241
Shobhit Kumar Srivastava, On the evolution of finite and small amplitude waves in non –ideal gas with dust particles
FM9/ PID-72
Shantashree Jena, Modelling and analysis of Pneumatic artificial muscle testrig
SM7/ PID-273
B.N.Dhanunjayarao, Prediction of Effective Elastic Properties of h-BN/Epoxy Composite using multi-scale FEM Approach
FM5/ PID-296
Sameena Tarannum, Sinusoidal and non-sinusoidal temperature modulations on three- component convection in a Newtonian fluid
FM7/ PID-243
Paramananda Padhi, Effect of Magnetic Field on the Mixed Convection Nanofluid flow in Lid Driven Cavity
FM13/ PID-161
Kshma Trivedi, Mathematical Modeling of OWC wave energy converter devices over undulated sea bed
SM7/ PID-294
Surya Dev Singh, Static analysis of CNT reinforced polymer composite
FM6/PID-33
Revathi Ravilisetty, Solution of One dimensional Strong Converging Cylindrical and Spherical Shock Waves in Non Ideal Gas
FM7/ PdID-238
Rahul Kumar Chaturvedi, Solution of generalized Riemann problem for hyperbolic p-system with damping
FM13/ PID-212
Harsha S. V. , Pseudo-spectral solution of thermal instability of nanofluid flow through a channel
SM7/ PID-301
Y. B. Sudhir Sastry, Modelling, Structural and Vibrational Analysis using SiC Composite Material Nose Cone dome for Re-entry Vehicles
FM6/PID-211
Sarswati Shah, Propagation of shock wave in a non-ideal reacting gas
FM7/ PID-245
Samit Ghosh, MHD forced convection flow in spherical geometry considering induced magnetic field in the entire domain
FM13/ PID-244
M.N. Srinivas, Stochastic, diffusive and time delay analysis of a stage structure fishery model with feedback controls
Time (hrs.) Event Venue
18:30 – 19:00 Valedictory Function SMS-304
Day 4: December 12, 2019
Leisure day
TS: Technical Sessions
YSAS: Young Scientist Award Session
SMS: School of Mechanical Sciences
SBS: School of Basic Sciences