it'll fight allyour battles - michigan state...

10
IT'LL FIGHT ALLYOUR BATTLES THE ULTIMATE WEAPON IN THE WAR ON GRASS AND WEEDS. So, when you're faced with a tough grounds maintenance mis- sion, get a WEED EATER trimmer -. THE ULTIMATE WEAPON. It'll fight all your cutting battles. Model 698 trims vines and limbs. For a full briefing on WEED EATER gas trimmers, write: WEED EATER, Inc., EO. Box 37347 Houston, Texas 770^6. MEED EATER WEED EATER, Inc.. a subsidiary qf Emerson Electric Co. When your job is battling tough grass and weeds, you need THE ULTIMATE WEAPON: a WEED EATER brand gasoline trimmer. Rugged, reliable, and ready- to-go, WEED EATER trimmers have powerful 2-cycle engines and heavy-duty nylon cutting line. So they'llfightyour tough cutting battles. Anytime, and every time. Model 6 0 9 is lightweight and maneuverable. When you need a quick clean-up of small areas, use the new lightweight, compact WEED EATER trimmer Model 609. It weighs just 12 lbs., and has a Tap-N-Go™head that feeds out cutting line when it is tapped on the ground. If you're facing heavy brush, or you need to prune vines or tree limbs, reach for Model 698. It has a big 21.2cc engine and two cutting lines. And its straight shaft and gear reduction unit lets you switch from the nylon line head to a metal Tri-Kut™ or sawtooth blade. It's the perfect trimmer for parks, schools, or commercial and industrial areas. The biggest battles call for the biggest trimmer: Model 657. You can handle any cutting mis- sion with its 85cc engine. It's equipped with a shoulder har- ness, four-line cutting head and has a metal blade capability. "rom golf courses to overgrown roadsides, this trimmer mows down the thickest grass and weeds. Quickly and easily

Upload: vuphuc

Post on 29-Jul-2018

217 views

Category:

Documents


0 download

TRANSCRIPT

IT'LL FIGHT ALLYOUR BATTLES

THE ULTIMATE WEAPON IN THE WAR ON GRASS AND W E E D S .

So, when you're faced with a tough grounds maintenance mis-sion, get a WEED EATER trimmer -. THE ULTIMATE WEAPON. It'll fight all your cutting battles.

Model 6 9 8 trims vines and limbs.

For a full briefing on WEED EATER gas trimmers, write: WEED EATER, Inc., EO. Box 37347 Houston, Texas 770^6.

MEED EATER WEED EATER, Inc.. a subsidiary qf Emerson Electric Co.

When your job is battling tough grass and weeds, you need THE ULTIMATE WEAPON: a WEED EATER brand gasoline trimmer.

Rugged, reliable, and ready-to-go, WEED EATER trimmers have powerful 2-cycle engines and heavy-duty nylon cutting line. So they'll fight your tough cutting battles. Anytime, and every time.

Model 6 0 9 is lightweight and maneuverable.

When you need a quick clean-up of small areas, use the new lightweight, compact WEED EATER trimmer Model 609. It weighs just 12 lbs., and has a Tap-N-Go™head that feeds out cutting line when it is tapped on the ground.

If you're facing heavy brush, or you need to prune vines or tree limbs, reach for Model 698. It has a big 21.2cc engine and two cutting lines. And its straight shaft and gear reduction unit lets you switch from the nylon line head to a metal Tri-Kut™ or sawtooth blade. It's the perfect trimmer for parks, schools, or commercial and industrial areas.

The biggest battles call for the biggest trimmer: Model 657. You can handle any cutting mis-sion with its 85cc engine. It's equipped with a shoulder har-ness, four-line cutting head and has a metal blade capability.

"rom golf courses to overgrown roadsides, this

trimmer mows down the thickest

grass and weeds. Quickly and easily

One man's way of expressing himself by Ron Morris, Managing Editor

" H e c a m e up h e r e a b o u t 12 y e a r s ago a n d bought this v a l l e y . H e l ikes to golf a n d h a s a lways d r e a m e d about bu i ld ing a golf course . N o w , he ' s not an a r c h i t e c t or a n y t h i n g e lse . H e didn't k n o w the first thing about it. But he just h a d this t r e m e n d o u s strong d e s i r e to c o m e up h e r e a n d do th i s . "

Dick B a i l e y , now with J a c k l i n S e e d C o m p a n y , i n t r o d u c e d m e to E l k h o r n V a l l e y Gol f C o u r s e , bui l t , owned , m a n a g e d a n d m a i n t a i n e d b y D o n Cut ler . Se t t ing high in the C a s c a d e s n e a r M e h a m a , O r e g o n , E l k h o r n V a l l e y is an e x p e r i e n c e in s c e n i c golf ing. It is a lso a g o l f e r ' s golf course .

B e i n g a g o l f e r , r a t h e r than an a r c h i t e c t , C u t l e r d e s i g n e d his c o u r s e with a golf c l u b and a b u c k e t of ba l l s . H e hit the b a l l s and bui l t the ho les . (That ' s not the r e c o m m e n d e d pro-c e d u r e u n l e s s you h a v e 12 y e a r s and lots of support . )

C u t l e r a n d h i s f r i e n d , A u s t i n L o c k e , did all of the c o n s t r u c t i o n work. L o c k e did the g r a d i n g with a C a t e r p i l l a r and Cut ler h a u l e d soil in an old U k e n a m e d the " W e e B o n n i e H e a t h e r " . L o c k e ' s m e c h a n i c a l ab i l i ty k e e p s the c o u r s e going a n d h e wil l b e in the s e a t again w h e n c o n s t r u c t i o n b e g i n s on the b a c k n i n e , n e x t y e a r .

N a t u r a l and m a n - m a d e h a z a r d s

m a k e it rough to p lay a r o u n d wi thout losing a ba l l . T h e h a z a r d r u l e s on the s c o r e c a r d r e a d :

C A N Y O N — O n N o s . 6 & 8, M e a d o w on lef t of No. 9 c o n s i d e r e d lost bal l . P e n a l t y s t roke and d i s t a n c e .

L A K E S — Nos . 3 & 5 — w a t e r -h a z a r d — k e e p w a t e r b e t w e e n you a n d the h o l e . O n e s troke p e n a l t y .

L A T E R A L H A Z A R D S — Nos . 2, 4 & 8 — Drop wi th in two c lu b l e n g t h s of point of entry . O n e s t roke p e n a l t y .

F E N C E — O n h o l e s No. 1, 2, 3, 4 & 5 — Lay a w a y two c lub lengths , no c l o s e r to the h o l e . No p e n a l t y .

An 8-foot high f e n c e h a d to b e put up a r o u n d the e n t i r e c o u r s e . S h o r t l y a f t e r it w a s f irst s e e d e d , in 1975, a h e r d of elk c a m e down to p lay a n d did the " e l k s t o m p " through the e n t i r e c o u r s e . M u c h w o r k had to b e d o n e to r e t u r n the s m o o t h n e s s of the g r e e n s , f a i r w a y s a n d tees .

T h e f a i r w a y s w e r e s e e d e d to a m i x t u r e of 1 / 3 r y e g r a s s ( M a n h a t t a n ) , 1 / 3 K e n t u c k y b l u e g r a s s (1 /3 G a l a x y 1 / 3 Fylking, 1 / 3 M e r i o n ) , a n d 1 / 3 f e s c u e ( J a m e s t o w n a n d F o r t r e s s ) . B a i l e y d e s i g n e d the m i x t u r e s .

T h e g r e e n s a r e s e e d e d w i t h P e n n c r o s s b e n t g r a s s and the t e e s a re p r i m a r i l y ryegrass . T h e resul t s a r e an

e x a m p l e of what good grass s e e d c a n do. T h e course is a p ic ture of d e n s e , h e a l t h y turf. N u m b e r four g r e e n w a s the b a c k d r o p for the w i d e l y e x p o s e d P e n n c r o s s a d v e r t i s e m e n t w i t h t h e b i r d f ly ing across a P e n n c r o s s g r e e n .

C u t l e r is e x t r e m e l y p l e a s e d with the r y e g r a s s on the tees . " Y o u can take a s l i c e out and it just c o m e s right b a c k . It 's f a n t a s t i c ! "

W h i l e the c o u r s e is only n i n e h o l e s right n ow, Cut ler h a s provided t h r e e t ees for e a c h ho le . E a c h r e q u i r e s a

The "Real Mr. Cutler" as his T-shirt states, and golfing partner Dick Frank talk with Dick Bailey about a seed mixture for the back nine.

C u t l e r doesn't mow roughs. "If a golfer hits in there, he's in trouble," he says. The 8-foot fence keeps the elk out and probably cuts down on vandalism.

This is number four where the Penncross ad w a s s h o t . Cutler moved most of these trees in himself, with a tree spade.

The canyon separating the tee and green on number six is home for many golf balls. The golfer on the tee has just sent it another resident.

Cutler has built his house in the middle of the course. Everywhere you look, the mountains provide a beautiful backdrop. Part of the m a i n irrigation pond is in the foreground. This is the o n e Don will enlarge.

This is a high ground view of number o n e and n u m b e r nine. The island in the upper bend of the Little North Fork will be the site of number 15.

This Uke hauled all the soil that was moved during course construction. It is n a m e d after Don's wife, whose encouragement helped him to realize his dream of building a golf course.

loro waters 52 of America's top TORO'sbeen

around the greens for 60 years. And we've grown to become the leading name

in golf course irrigation. That can mean a lot; whether you're

replacing a few heads or specifying a fully-automated pushbutton system. You'll be dealing with the company that

irrigates the majority of U. S. courses. And that includes over half of Golf Digest's top-100 list.

Put in TORO automatic sprinklers and at the crack of the day's first drive you know your course is ready. Greens have been watered in their own special way. Fairways, tees and rough got customized sprinkling. Frost or dew has been syringed off the greens. Yet nobody has been near the course all night long.

But the newest thing about TORO

100 golf courses. Let that soak in. automatic sprinkler systems is that the cost is less than ever. For example, our new hydraulically-controlled MPC system brings automatic within reach of just about everybody. Because we don't have to dig up your turf, you don't have to dig down into your pocket to afford the conversion.

And the solid-state VT 3 system we've just introduced bucks the rising tide of inflation with more control for less money. It's pushbutton irrigation nobody

else can touch. You don't have to be in Pebble Beach

or Augusta to have a great golf course. Just call our Golf Course Marketing Manager John Skidgel today. His 24-hour number is 714-359-0701. It could be the biggest step you ever took toward Golf Digest's top 100 list. Did that soak in?

The TORO Company, Irrigation Division, P.O. Box489, Riverside, CA 92502. International Telex: 676-490.

Circle 107 on free information card

Power on the Fairways, Finesse around the green.

I t ' s n e v e r h a r d t o s p o t t h e p r o s - T h e I n t e r n a t i o n a l 1 8 4 a n d 2 8 4 c o m p a c t t r a c t o r s a r e a s p r o f e s s i o n a l a s y o u c a n g e t . T h e 1 8 . 5 h p . , 1 8 4 h a s a l o w a n d w i d e s t a n c e t h a t d e l i v e r s p r e c i s i o n , a g i l i t y a n d s t a b i l i t y w h e r e v e r y o u n e e d i t . T h e 2 8 4 C o m p a c t T r a c t o r ' s h u s k y 2 8 h p p u t s t u r f - c o m m a n d i n g p o w e r i n y o u r h a n d s f o r t h o s e b i g w i d e - o p e n j o b s . B u i l t s i m p l e a n d s o l i d , t h e s e t r a c t o r s a r e e n g i n e e r e d t o m i n i m i z e m a i n t e n a n c e a n d d o w n t i m e . A n d w i t h a l o n g l i s t o f a t t a c h m e n t s t h e r e ' s p r a c t i c a l l y n o j o b t h e y c a n ' t d o . C h e c k o u t t h e I n t e r n a t i o n a l 1 8 4 a n d 2 8 4 a t y o u r n e a r e s t ' I n t e r n a t i o n a l H a r v e s t e r d e a l e r . * '* ^ j j j .

F o r p r o f e s s i o n a l r e s u l t s , t r u s t a s e a s o n e d h a n d . INTERNATIONAL HARVESTER

Circle 108 on free information card

d i f f e r e n t a p p r o a c h s h o t . H e h a s avoided label ing the tees, allowing a golfer to play whichever he thinks he can. They do increase in difficulty.

The Cutler family is the mainte-nance crew. Son Bruce mows greens, daughter Liz mows tees, mom Bonnie runs the pro shop, and Don mows fair-ways.

Because of the climate, the course can rece ive 100 inches of rain a year, mowing b e c o m e s a problem. Bruce will double-cut the greens whenever he can. He mows with a Tr ip lex with brushes. He spikes the greens once a month and verti-cuts every two weeks. Still, thatch is becoming a problem. The course is in its third full year and a p p r o x i m a t e l y an i n c h h a s a c -cumulated. Cutler has purchased a Ryan topdresser and will begin top-dressing with sand this year .

No drainage was instal led during construction. However, there is a need and Cutler will install l ines under four, five, seven and possibly number one. He plans on putting l ines under each green on the back nine, during construction.

Most of the rain comes during the winter. The course is irrigated with a Rainbird automatic system during ap-proximately three to four months of the summer. Cutler built a 3- to 4-acre holding pond approximately 10 feet deep, but it does not provide enough water. He has got water rights to the Little North Fork which flows into the Santiam River and will have plenty of water this year .

The Little North Fork runs directly

This is the site of the back nine. While Cutler had to move trees in for the front nine, here he has to take them out.

behind the front nine and will be instrumental in designing the back nine . Cutler plans one hole on an island that the river flows around.

Native Poa trivialis is becoming a problem, showing up in the fairways and contrasting with the dark green mixture. Bai ley suggested to Cutler that he take care of that and what little Poa annua there is with Roundup.

Bruce follows a Scotts program on the greens. He fert i l izes lightly once a month, alternating between straight nitrogen and a 27-10-5 analysis. He also uses Scotts fungicides for disease. Snow mold is a problem, although the area receives little snow. The course was frozen solid for three months this year , a rare occurrence in that part of the country. Don had just talked to a fe l low living in the area s ince 1910 who said it was the worst winter as far as freezing, that h e had seen.

The course is c losed from the first of N o v e m b e r through m i d - M a r c h . However , Cutler plans to sell lots this winter to f inance construction of a n e w clubhouse, and the course will stay open through the winter when the new residents move in.

Don still has his work cut out for him. He has one last project he wants to finish on the front nine b e f o r e he begins on the back. He is going to put an L-shaped island in one of the ponds and enlarge it. W h e n the course is fin-ished, what is now number nine will be number one, and number eight will be nine. The new clubhouse will set on a knoll overlooking the back nine.

As Dick Bai ley puts it: " I t ' s amaz-ing. Most people get tons of equip-ment , get somebody to design it, and hire a construction firm. This guy just goes out and builds it h imse l f . "

Cutler comments "This is my way of expressing myse l f . "

GOLF BUSINESS/JUNE 17

You may retire

before our mower does.

We give it Ryan's modular parts replace-ment system. So if a breakdown does occur, you can have the Commercial Mower back on your course quickly.

But we also make it easy to use. With a l .25-gallon fuel tank for longer running, five adjustable cut-ting heights, a two-speed thrott le and fold-down handle for storage or transpor-tation.

Together, these features make the C o m -mercial Mower the right tool for profes-sional turf maintenance. Ask your Ryan dealer today about the Ryan Commercial Mower. The one machine that may outlast even the most dependable worker on your course: you.

Commercial Mower. Easy to use, built to last.

RYAN T U R F - C A R E E Q U I P M E N T OMC Lincoln, a Division of Outboard Marine Corporation 6724 Cushman P.O. Box 82409 Lincoln, NB 68501

79-CUR-1

That 's the way we build the Ryan C o m -mercial Mower: to last.

W e use a rugged, 2-cycle engine with electronic ignition and a quick-response governor that keeps the power coming even

in tall or thick grass. ( B e c a u s e i t 's a 2-cycle, you get con-stant engine lubrica-t i o n w i t h o u t t h e danger of oil starva-tion when mowing on slopes.)

W e put that engine on a 12-gauge steel h o u s i n g a n d s u r -r o u n d it w i t h a tubular steel frame, to protec t it while mowing under shrubs or bushes.

Redesigning and

by Michael J. Hurdzan, Ph.D.

Redesigning a putting green assumes that it is not adequately serving its intend-ed function. If it were, it would not need to be redesigned. This process can be com-pared to Darwin's Theory of Natural Selection that says, in essence, that those entities that fail to adapt to environmental pressure will be replaced. With some poetic license it can be said that a golf green, or a golf course for that matter, must be functional if it is to persist and the form that an installation takes is a result of the fuction it must serve. The design adage is "form follows function".

In a building, the form of a door, for in-stance, is a result of the function it must serve. Some parameters of form are com-mon to most all doors if their function is to permit easy entry of people. As an exam-ple, most doors are 6V2' - 7' high so a per-son could walk through erect and most are at least 36" or so wide so one doesn't have to squeeze through. Then it should be c lear that the function of the door determines the form of the door. If large volumes of people must use the doorway or if other special requirements are

Michael J. Hurd-zan, Ph.D., is a p a r t n e r in the golf course architectural firm of Kidwell & Hurdzan, Inc., Columbus, Ohio. He is a member of the American Society of Golf Course Archi-tects and the

American Society of Landscape Archi-tects. He is currently writing a book on the history of golf course architecture.

1. Golfer pleasure, ease of maintenance and aesthetics are functions to consider when determining form. 2. Pitch, or slope, determines water movement, shown here by heavy arrows. 3. Drainage lines are in, grade stakes in place, and topsoil is being moved.

recognized, then this function influences the form it must take.

The form of a green is determined by the functions it must serve. However, a green does not serve just one function. Golfer pleasure, ease of maintenance, and aesthetics should be considered. The amount of money available to build the green will also influence the form or at least temper the relationship of form and function.

Size is primarily a maintenance func-tion. In general we are concerned not with total size of the putting surface but rather total cupset area. A green should have enough cupset positions so that the super-intendent is not forced to return to an old cupset until it has time to fully heal itself from traffic damage. If it takes twenty-one days to heal an area in the heat of summer, and cups are changed once a day, then there should be twenty-one cupset posi-tions. If the traffic damage area around a cup is a 16' circle then the area =7rr2 or 3.14 x(8)2 = 3.14 x 64 = 200 sq. ft. x 21 positions = 4220.16 sq. ft. of cupset space. Then if you add in setback area of perimeter of the putting surface, usually 9 - 12', and allow for undulations that do not provide fair cupsets, the total size of the modern green is about 6,000 sq. ft. Like the door example, if the volume of traffic requires more or less than daily cup changes, then the total form is enlarged or reduced accordingly.

Next consider pitch or slope of a green.

Pitch or slope is usually lower in front and rising to the back. This elevation differ-ence serves the function of receiving the impact of the golf ball and lessening its roll. Pitch also determines surface drain-age while pitch and undulation in a putting surface can be used to drain the water from the green in several directions and not just out the front. Needless to say, the more pitch and undulation in a green, the more difficult it becomes to read and make a putt and the more visually aesthetic the green becomes.

Pitch should be at least 2% to provide good drainage and still be a fair test of golf. If steeper than 4%, a putted golf ball tends to increase its velocity as it rolls down the slope and putting is no longer a test of skill but luck. Greens are raised above grade to present better targets and permit tile drainage to fall and thus . . . form follows function on slope.

Other examples of form and function are the distance of sandtraps from greens. If the sole function is to test the golfer, then traps are built within two or three feet of the green. If function is more con-cerned with having adequate space to turn a greens mower and other equipment, spreading out foot traffic on the apron, and preventing large quantities of sand from being blasted out onto the green, then traps are placed 10-12 feet from the putting surface. Sandtrap lips made higher than surrounding areas also prevent water from

establishing an existing putting green

4. T h e first four steps in the construction sequence are done. 5. Quality topsoil is being worked in to improve the soil structure of this future green. 6. A straw mulch will prevent erosion and help keep the seedbed moist. 7. It is essential to keep the seedbed moist, often watering eight times daily for 5-8 minutes. 8. The author is shown, using a walk behind greens mower with a drum roller. It is important to roll the green with the reels disengaged and weight in the basket for the first 5-6 times.

running into the trap and eroding the sand. Thus a new green is designed to pro-

vide the golfer with a clearly defined and challenging target area but also to permit efficient maintenance.

How does redesign of a green take place? The most efficient and positive method is to produce a scaled drawing of the existing green and then design in desired features on paper. This method of using a scaled drawing provides those paying the bills of fifteen to twenty-five thousand dollars a chance to see what they are buying, gives the contractor or work-men a guide to establish the cost before construction, permits competitive bidding, assists construction and provides a perma-nent record of the green and its substruc-ture.

Another method is to simply bulldoze out the old green and " fee l " in a new green. This works only if the person directing the work has " fe l t " in many greens before and can envision the design and set appropriate controls. If not, then it bcomes a case of "move some dirt here and if that doesn't work, move it back" — This is sort of how many wives arrange furniture. This approach is risky, time con-suming and many times the finished pro-duct is less than good.

Whatever method for establishing the new design is chosen, the construction of the g r e e n must fo l low an o r d e r e d sequence. This sequence is:

1) Remove irrigation 2) Strip off good sod for resodding 3) Strip off bad sod for disposal 4) Strip and store topsoil 5) Do earthwork — compact and

shape 6) Bring green to final smooth sub-

grade 7) Install tile drainage 8) Re-establish the contours 9) Retopsoil perimeter of green and

banks 10) Install irrigation — re-establish

contour 11) Haul in sand or amended soils 12) Mix and spread sand or amended

soil 13) Compact putting surface 14) Grade out entire green 15) Seed, compact, fertilize, mulch and

water Now the green is properly built and

soon the grass starts coming up through the mulch. The maintenance practices that should be followed on this seedling turf are much different than those followed for mature plants. New greens can cause a superintendent many sleepless nights if he does not understand the principles and practices of establishing new turf. Perhaps reviewing these principles and practices will prove beneficial.

WATER — New greens should NEVER be allowed to dry out on the SURFACE. This may mean watering as often as eight times a day for 5-8 minutes on each watering. Daily climatic conditions will determine the frequency and duration of the watering cycle. It is possible that if the

soils on the outslopes of the banks are par-ticularly tight, they will not accept this watering schedule and will become too soft and saturated for their own establish-ment. Then handwatering of the putting surface may become necessary.

MULCH REMOVAL — If the mulch were ideally and properly applied, the seedlings would grow through the mulch and none of it would need to be removed. But the inconsis tency of the mulch material, the conditions when it was ap-plied, or operator error may result in an uneven covering of mulch; thus some must be removed.

One method of removing mulch is by using a broom or leaf rake and very care-fully rake off the excess mulch. This oper-ation can do much more damage than good if the "raker" doesn't use the touch of a surgeon, for he will rake up as much seedling turf as he will mulch.

Another method of reducing mulch on a green is to use a rotary mower at 3A" to 1 " high to chop the excess mulch. This pro-cedure also serves as a method of first-cutting the greens.

Not all mulch should be removed for it can provide exce l lent protect ion to seedlings against winter dessication and erosion. In early spring, the mulch may prevent turf loss from lack of water when days are warm enough for growth but nights are too cold to allow keeping the irrigation system charged. Mulch that remains on the greens will be chopped up by the mower and will simply decompose.

FERTILIZER — Very few superinten-dents adequately fertilize new greens because it is so different from normal schedules. We commonly recommend one pound of " N " per thousand square feet per week for 6-8 weeks in the spring. This heavy fertilization rate is because much of the nitrogen is tied up by the mulch which probably has a very high carbon to nitro-gen ratio, some " N " is leached out of the amended soil profile, and the new plants need plenty of nutrients. The fertilizer ratio should be 3-1-2 with no more than 33% water insoluble nitrogen.

No lime or carbonate base material should be applied, ever, to a green until soil tests indicate the requirement. This is because most native sands are limestone sands with high carbonate content. There-fore acid-forming fertilizers are desired. Likewise, it may be necessary to apply ele-mental sulfur to help keep the soil solution slightly acid.

Routine application of micronutrients, e s p e c i a l l y i ron , is n e c e s s a r y . T h e amended soils or sand mix on the greens is naturally an almost inert or sterile media. Except for the limited number of cation exchange sites on the organic amendment, few nutrients are going to be retained by the entire profile. A product like iron-plus works well.

MOWING — Greens should not be mowed until they are at least 1" high. Then it may be that using the rotary mower to chop the mulch will provide adequate

mowing for a few weeks. As the green grows more dense and vigorously, initial mowing with a greens mower may begin but with radically modified methods.

The only acceptable mower for bring-ing a new green is a walk-behind with a drum roller and caster wheels (not a grooved-front Roller). The operator should be instructed to roll the green with the mower with reels not engaged and some weight in the catcher basket for the first five to six times. He should walk very slowly and flat-footed to avoid distorting the soft surface. Upon reaching the edge of the green he does not make a swinging turn, but rather he disengages the clutch and makes a slow broad turn so he does not damage or rip out seedlings growing on the collar.

Roll the green by this method until the mower does not 'track', then the mower should be set at 3A" and mowing begins. Gradually the height of cut should be lowered to V2" and remain there into win-ter. The following spring the same rolling and then cutting procedure with the walk-behind should be followed to minimize the disruptions caused by the winter freezing and thawing.

Most superintendents find it is 6-8 weeks before the greens and the collars can support a riding greens mower. Topdressing of new greens is not neces-sary if acceptable grade was achieved before seeding and the procedure with the greens mower is properly done. The height of cut can slowly be lowered to whatever the superintendent wishes usually by mid-May to early June. We strongly recom-mend that a green seeded in the fall and even mowed three to four times, should not be opened until around June 1. The turf stand must be mature before it is sub-jected the rigors of play.

Perhaps the most controversial subject about early maintenance practices is the use of PESTICIDES. It is well recognized that under certain conditions any pesticide can be phytotoxic. Hence judicious use of any chemical is the rule.

We recommend no pesticides the first fall and winter unless there is reason to suspect an infection or infestation. We all know that spontaneous generation does not occur so if there is to be pest injury, there must be a pest present on the new turf.

In the fall, we usually find no insect in-jury so insecticides are strongly avoided. With diseases, the situation is slightly different. There is the possibility of snow mold on new turf in the spring but only if there is a source of inoculum.

If new greens are built in areas surrounded by existing sod that has shown previous evidence of snow mold infection, then it is possible that the oversummering form of the disease may have gotten dragged, washed, or carried on the new green and could cause infection. If the decision is made to apply a pre-emergence chemical, it should be done as late in the year as possible to give the grass more maturation time. p