j-bolt embedment design

IMPORTER & EXPORTER OF ALL TYPE FASTENERS

ARAB BOLTS

ANCHOR BOLTS

BOLT & NUT

CABLE TRAY &

CHAINLINK

EMBEDED SHEETS

PIPE SUPPORT

PIPE CLAMPS

SHUTTERING ITEMS

SCAFFOLDING ITEMS

TURN BUCKLES

U-BOLTS

UNISTRUT CHANNEL

WOLOUF TRADING EST

ACCESSORIES

FENCE SYSTEM

Wolouf Trading Establishment (WTE) - Arab Bolts a Saudi Aramco Approved Vender No. : 10031695 &

Sabic Vender No. # 504834 was established in 1996 with the objectives of providing quality fasteners in

field of Construction, Contracting & Plant Maintenance. Since its establishment WTE is importing & stocking quality

products in fasteners from different European and Fareast Companies. WTE has successfully handled different

projects through supply of quality fasteners to reputed Construction and Contracting Companies in various

companies.

To cope up with growing activities and increasing demand of quality fasteners in The Eastern Province,

WTE has open new branch offices in Ad-Damman, Al-Jubail, Al-Khobar and Qatar. To facilitate valuable customers

WTE has got Industrial License from Industrial Ministry in the name of Wolouf Small Steel Industries and

Fabricators, Dallah Industrial Area, Dammam to Manufacture all type of Anchor Bolts (ASTM standards or any

other special standards).

Highly Qualified, Skilled and Semi Skilled workers of WTE take special care to meet project specification,

industries standard and clients requirements.

Sd/

Chairman

Anchor Bolt (Straight Type) 1

Anchor Bolt (L-TYPE) 2

Anchor Bolt (J-TYPE) 3

Anchor Bolt (JE-TYPE SLEEVE) 4

Anchor Bolt (TYPE - 1,1S,2,2S,3,3S) 5-6

Adjustable Clevis Hanger 35

Authantic Stainless Steel (Chemical & Mechnical Requirement) 72-74

Bolt Strength Requirements By Grade 20-22

Channel Clamps 36

Chain Link Fence 54-56

Chain Link Fence & Wire Rope Fittings 57

Drop in Anchor / Expansion Shield 44

Eye Bolt (Close and Open Type) 45

Fully Threaded Rod 8

Flat Washer DIN 125A/ DIN 126A 29

Fender Washer 30

Flat Washer ASTM F436 M 31

Gratings 65-68

Hexagon Head Bolt/Screw DIN 931/933 MM Thread 9

Hexagon Head Bolt/Screw DIN 931/933 UNC Thread 10

Hexagon Head Bolt/Screw ASTM A307 A 11

Hexagon Head Bolt/Screw ASTM A307 B 12

Heavy Hexagon Head Bolt/Screw ASTM A325 M 13

Heavy Hexagon Head Structural Bolts ASTM A490 14

Heavy Hexagon Head Structural Bolts ASTM A490 M 15

High Strength Hexagon Head Bolt DIN 6914 16

Hexagon Head Bolt/Screw BS4190 17

Hexagon Head Bolts/Screw BS3692 18

High Strength Hexagon Head Bolt DIN 7990 19

Hexagon Nuts ISO 934/DIN 555 23

Heavy Hexagon Nuts ASTM A563 Gr. A, C 24

Heavy Hexagon Nuts ASTM A563 M(10S) 25

Heavy Hexagon Nuts ASTM A194 26

High Strength Hexagon Nut DIN 6915 27

High Strength Hexagon Nut BS4190 28

Helical Spring Lock Washer DIN 127 32

High Temperature, High Tensile Alloy Bolt

(Chemical & Mechanical Requirement) 71

Long Spring, Short Spring and Without Spring Channel Nuts 53

Misc. Products 70

Pipe Support Clamp with and without Rubber 34

Pipe Clamps and Risers 39-41

Stud Bolt 7

Support Assembly Components 37-38

Stud Anchor (Through Bolt) 43

Unistrut Channel Fittings / Bracketery 51-52

Scaffolding and Shuttering Items 58

Scaffolding 59-60

Scaffolding Items 61-64

Turn Buckle/ Lifting Hook 42

U-BOLT 33

Unistrut Channel 47-49

Unistrut Cantilvers 50

Wolouf Unistrut Channel and Accessories 46

Wire Rope 69

(Middle East Map)

(Location Map (Wolouf Trading Est.))

PARTICULARS PAGE NO. PARTICULARS PAGE NO.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

S.NO

29.

30.

31.

32.

33.

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

47.

48.

49.

50.

51.

52.

53.

55.

54.

56.

S.NO

1/2" 12 250 40 355 80 100 4.5 6.8

" 16 250 40 355 85 125 6.8 7.7

3/4" 20 300 50 405 85 150 9.9 10.4

7/8" 22 360 50 460 85 175 14.0 13.1

1" 24 410 65 510 90 175 18.5 15.8

1-1/8" 27 460 75 560 90 200 23.4 15.8

1-1/4" 32 510 75 610 100 225 29.7 18.0

1-3/8" 36 560 90 680 100 250 35.1

1-1/2" 39 610 90 730 100 275 43.2

1-5/8" 42 660 100 800 125 300 50.9

1-3/4" 45 710 115 865 125 325 58.5

2" 50 810 125 990 150 350 77.4

2-1/4" 57 910 140 1100 150 400 101.7

2-1/2" 64 1020 160 1240 175 450 125.6

5/8

Coating: Grade :

Mill Finish, Electro Galv. & Hotdip Galv. 4.6, A307A, A307B, ASTM A36, 8.8, B7, SS304, SS316

Anchor Bolts

Dimensionin MM

Minimum EdgeDistance

Capacity

Diain

Inches

Diain

MM

MinimumDepth

ThreadLength

TotalLength

Tension ShearShear

KNTension

KN

A C L MM To Center Bolts

ANCHOR BOLTS STRAIGHT TYPE

1

1/2" 12 250 100 40 355 80 10 4.5 8.1

5/8" 16 250 100 40 355 85 125 6.8 10.4

3/4" 20 300 150 50 405 85 150 9.9 14.0

7/8" 22 360 150 50 460 85 175 14.0 18.0

1" 24 410 200 65 510 90 175 18.5 22.5

1-1/8" 27 460 200 75 560 90 200 23.4 24.3

1-1/4" 32 510 200 75 610 100 225 29.7 28.8

1-3/8" 36 560 200 90 660 100 250 35.1 33.8

1-1/2" 39 610 200 90 710 100 275 43.2 38.7

1-5/8" 42 660 200 100 760 125 300 50.9 44.1

1-3/4" 45 710 255 115 850 125 325 58.5 46.8

2" 50 810 255 125 950 150 350 77.4 58.5

2-1/4" 57 910 255 140 1070 150 400 101.7 70.7

2-1/2" 64 1020 255 160 1200 175 450 125.6 84.2

Coating: Grade :


Anchor Bolts

Dimensionin MM


Capacity

Diain

Inches

Diain

MM

MinimumDepth Bend

TotalLength

Tension ShearShear

KNTension

KN

A C L MM To Center Bolts

ThreadLength

B

ANCHOR BOLTS L - TYPE

2

ANCHOR BOLTS J - TYPE

1/2" 12 250 50 190 410 542 80 100 4.5 9.5

5/8" 16 250 60 240 420 595 85 125 6.8 14.9

3/4" 20 300 70 285 485 705 85 150 9.9 22.5

7/8" 22 360 75 335 545 787 85 175 14.0 31.1

1" 24 410 90 380 610 874 90 175 18.5 40.5

1-1/8" 27 460 100 430 675 970 90 200 23.4 51.3

1-1/4" 32 510 115 475 735 1065 100 225 29.7 65.3

1-3/8" 36 560 125 525 800 1163 100 250 35.1 78.3

1-1/2" 39 610 125 570 865 1281 100 275 43.2 95.0

1-5/8" 42 660 145 620 925 1354 125 300 50.9 108.5

1-3/4" 45 710 150 665 990 1452 125 325 58.5 128.3

2" 50 810 180 760 1120 1648 150 350 77.4 168.8

2-1/4" 57 910 200 855 1245 1861 150 400 101.7 212.0

2-1/2" 64 1020 220 955 1370 2074 175 450 125.6 258.8

Coating:Grade :


Anchor Bolts

Dimensionin MM


Capacity

Diain

Inches

Diain

MM

MinimumDepth

ThreadLength

TotalLength

Tension ShearShear

KN

TensionKN

A L MM To Center Bolts

HookLength

ECut

Length

C

Cut Length

A

3

ANCHOR BOLTS JE - TYPE SLEEVE

Coating:Grade :


Anchor Bolts

Dimensionin MM


Capacity

Diain

Inches

Diain

MMMinimum

DepthThreadLength

TotalLength Tension Shear Shear

A G L MM To Center Bolts

HookLength

ECut

Length

C

Length Sleeve

Nut onType 4

F

Tension M N

Sleeves

3/4" 20 300 70 285 50 280 355 575 85 150 9.9 22.5 50 100

7/8" 22 360 75 335 55 325 415 657 85 175 14.0 31.3 50 100

1" 24 410 90 380 65 375 475 740 90 175 18.5 40.5 75 100

1-1/8" 27 460 100 430 75 420 535 832 90 200 23.4 51.3 75 150

1-1/4" 32 510 115 475 85 465 595 926 100 225 29.7 65.3 75 150

1-3/8" 36 560 125 525 90 515 655 1018 100 250 35.1 78.3 75 150

1-1/2" 39 610 125 570 95 560 715 1111 100 275 43.2 95.0 100 150

1-5/8" 42 660 145 620 110 605 770 1199 125 300 50.9 108.5 100 150

1-3/4" 45 710 150 665 120 650 830 1292 125 325 58.5 128.3 100 200

2" 50 810 180 760 125 750 955 1484 150 350 77.4 168.8 100 200

2-1/4" 57 910 200 855 145 840 1070 1686 150 400 101.7 212.0 100 200

2-1/2" 64 1020 220 955 160 955 1190 1894 175 450 125.8 258.8 150 200

4

Hex boltHeavy Hex bolt

Rod

Rod

Bolts / Rods

Rod

ASTM A307, Grade A

ASTM A36/A36M

ASTM F1554 M GR , 36

ASTM 193/A 193M GR . B7

ASTM F1554 Gr . 105

* thru 1-1/2*Over 1-1/2

*thru 3*M12thru M72

thru 3"

*thru 3*M20 thru M72

*thru 3*M12thru M72

ASME B18.21 UNC

ASME B18 2.1 , UNC Class 2ASME B1.13M

ASME B18 2.1 , UNC Class 2

ASME B1 .1, 8 UNC Class 2ASME B1.13M

ASME B1.1, UNC Class 2

ASTM A563, Grade AHeavy Hex



ASTM A563 , DH Heavy Hex Or ASTM A 194/A 194 M

ASTM A563 , DH Heavy Hex Or ASTM A 194/A 194 M

Golvanized to ASTM A153, ClassC Or ASTM B695 ,Class 50

Golvanized to ASTM A153, Class COr ASTM B695 ,Class 50


Painted as per APCS - ICOR APCS - IF PER SAES -H- 001


Anchor MaterialSpecifications

Sizes ProfileThreadProfile

Nut MaterialSpecification

Coating Type

FORMAT FOR ANCHOR BOLTCALL OUT ON DRAWINGS

ANCHOR BOLT TYPEBOLT DIAMETER (d)

NUMBER OF NUTSAB 3S 1-1/2" 100-600(2)

BOLT LENGTH (L)

PROJECTION

INCH SIZES

ANCHOR BOLT TYPE

BOLT DIAMETER (d.)

AB 3S M24 100-600(2)

BOLT LENGTH (L)

PROJECTION

NUMBER OF NUTS

METRIC SIZES

Notes: Table-11. Minimum Edge distance is measured from the centerline of the Anchor Bolt to the EDGE of the Concrete.2. ASTM A307 Bolt lengths may not be available for the larger diameter type is Bolts.3. If the required projection exceed the maximum projection in the table above, use A type 2 Anchor Bolt.4. EDGE distance for bolts with sleeves must be increased by (SD-d.), 1/25. Spacing of Bolts with sleeves must be increased by (SD-d.)6. TPI + threads per inch

Notes: Table-21. Minimum Edge distance is measured from the centerline of the Anchor Bolt to the EDGE of the Concrete.2. EDGE distance for bolts with sleeves must be increased by (SD-d.)/23. Spacing of Bolts with Sleeves must ne increased by (SD-d.)4. TPI + thread per Inch.

Coating : Mill Finish, Electro Galv. & Hotdip Galv. and Painted

ANCHOR BOLTS - TYPE 1, 1S, 2, 2S, 3, 3S

ARAMCO STANDARD

Table 2 : ASTM A193 , F1554 Grade 105 Anchor Rods inch Series

Bolt Properties Type 1 Type 15

Size dInch

TPIStressArea

2(In )

TI2d

(mm)

Min12d.(mm)

Edge Dist4d>M+da/2

(mm)

Spacing6d.

(mm)

Min.SL+150(mm)

Edge Dist(Note b)

(mm)

Spacing(note o)(mm) SD (mm) SL (mm)

SleeveLTd + 13(mm)

1/2" 13 0.142 26 25 152 100 76 275 127 114 50 125

5/8" 11 0.226 29 32 191 110 95 325 127 129 50 175

3/4" 10 0.334 32 38 229 111 114 325 127 145 50 175

7/8" 9 0.462 35 44 267 113 133 325 127 161 50 175

1" 8 0.606 38 51 305 114 152 400 139 202 75 250

1-1/8" 7 0.752 42 57 343 116 171 421 139 218 75 250

1-4/4" 7 0.969 45 64 381 127 191 441 149 234 75 250

1-3/8" 6 1.155 48 70 419 140 210 160 160 250 75 250

1-1/2" 6 1.405 51 76 457 152 229 604 183 291 100 375

1-3/4" 5 1.899 57 89 533 178 267 642 206 322 100 375

2" 4.5 2.498 64 102 610 203 305 755 228 354 100 450

2-1/4" 4.5 3.248 70 114 686 229 343 793 250 386 100 450

2-1/2" 4.0 3.999 77 127 762 254 381 981 297 468 150 600

2-3/4" 4.0 4.934 83 140 833 279 419 1019 319 499 150 600

3" 4.0 5.967 89 152 914 305 457 1057 342 531 150 600

1/2" Hex 1.50 13 0.142 107 152 10 100 76 275 15 127 114 50 125

5/8" Hex 1.75 11 0.226 115 191 12 110 95 325 17-1/2 127 129 50 175

3/4" Hex 2.00 10 0.334 123 229 14 111 114 325 17-1/2 127 145 50 175

2/8" Hex 2.25 9 0.462 131 267 15-1/4 113 133 325 18 127 161 50 175

1" Hex 2.50 8 0.606 139 305 17-1/2 114 152 400 21 139 202 75 250

1-1/8" Hex 2.75 7 0.763 146 343 19-1/2 116 171 421 22-1/2 139 218 75 250

1-1/4" Hex 3.00 7 0.969 154 381 21 127 197 441 23-1/2 149 234 75 250

1-3/8" Hex 3.25 6 1.155 162 419 23 140 210 460 24-1/2 160 250 75 250

1-1/2" Hex 3.50 6 1.495 170 457 24-1/2 152 229 604 30-1/2 183 291 100 375

1-3/4" Heavy Hex 4.00 5 1.899 186 533 28-1/2 178 267 642 32-1/2 206 322 100 375

2" Heavy Hex 4.50 4.5 2.498 202 610 32 203 305 755 37-1/2 228 354 100 450

2-1/4" Heavy Hex 5.00 4.5 3.248 218 686 35-1/2 229 343 793 40 258 386 100 450

2-1/2" Heavy Hex 5.50 4 3.999 234 762 39 254 381 981 48 297 468 150 600

2-3/4" Heavy Hex 6.00 4 4.934 250 838 43 279 419 1019 50 319 499 150 600

3" Heavy Hex 6.50 4 5.967 266 914 46-1/2 305 457 1057 52 342 531 150 600

Table 1 : ASTM A307, Grade Sizes Inch Bolt Properties

Size dInch

Type 1 Type 15

TypeLT

(in)

StressArea

2(In )

Max. Proj.(Bolt o)(mm)

Min.12d

(mm)

Length (L)Proj.(In)

Edge Dist4d>M+da/2

(mm)

Spacing6d.

(mm)

Min.SL+150(mm)

Length (L)Proj.(In)

Edge Dist(Note dl)

(mm)

Spacing(note s)(mm)

SD (mm)

SL (mm)

TPI

Sleeve

5

3/4" 10 0.334 51 57 229 114 114 325 130 145 50 175

7/8" 9 0.462 57 67 267 133 133 325 147 161 50 175

1" 8 0.606 64 76 305 152 152 400 177 202 75 250

1-1/8" 8 0.790 70 86 343 171 171 421 195 218 75 250

1-1/4" 8 1.000 77 95 381 191 191 441 252 234 75 250

1-3/8" 8 1.234 83 105 419 210 210 460 230 250 75 250

1-1/2" 8 1.492 89 114 457 229 229 604 260 291 100 375

1-3/4" 8 2.882 102 133 533 267 267 642 294 322 100 375

2" 8 3.125 118 155 575 301 301 690 325 360 100 450

2-1/4" 8 3.557 127 171 610 343 343 793 364 386 100 450

2-1/2" 8 4.442 140 191 762 381 381 981 424 468 150 600

2-3/4" 8 5.425 153 218 838 419 419 1019 459 499 150 600

3" 8 6.506 165 229 914 457 457 1057 494 531 150 600

Notes : Table-31. Minimum EDGE distance is measured from the centerline of the Anchor Bolt to the EDGE of the Concrete, 2. EDGE distance for bolts with sleeves must be increased by (SD-d.)23. Spacing of Bolts with sleeves must be increased by (SD-d.), 4. TPI + thread per Inch

M12X1.75 84.3 25 24 144 106 72 275 125 110 50 125

M16X2 157 29 32 192 108 96 275 125 130 50 125

M20X2.5 245 33 40 240 110 120 325 125 150 50 175

M24X3 353 37 40 280 112 144 400 138 195 75 250

M27X3 459 40 54 324 114 162 400 138 210 75 250

M30X3.5 561 43 60 360 120 180 400 143 225 75 250

M36X4 817 49 72 432 144 216 525 176 280 100 375

M42X4.5 1120 55 84 504 168 252 525 197 318 100 375

M48X5 1470 61 96 576 192 288 600 218 340 100 450

M56X5.5 2030 69 112 672 224 336 672 246 380 100 450

M64X6 2680 77 126 768 256 384 768 299 470 150 600

M72X6 3460 85 144 864 288 432 864 327 510 150 600

Notes : Table-2M1. Minimum EDGE distance is measured from the centerline of the Anchor Bolt to the EDGE of the Concrete, 2. EDGE distance for bolts with sleeves must be increased by (SD-d.)23. Spacing of Bolts with sleeves must be increased by (SD-d.), 4. TPI + thread per Inch

M12X1.75 84.3 25 24 144 106 72 275 125 110 50 125

M16X2 157 29 32 192 108 96 275 125 130 50 125

M20X2.5 245 33 40 240 110 120 325 125 150 50 175

M24X3 353 37 40 280 112 144 400 138 195 75 250

M27X3 459 40 54 324 114 162 400 138 210 75 250

M30X3.5 561 43 60 360 120 180 400 143 225 75 250

M36X4 817 49 72 432 144 216 525 176 280 100 375

M42X4.5 1120 55 84 504 168 252 525 197 318 100 375

M48X5 1470 61 96 576 192 288 600 218 340 100 450

M56X5.5 2030 69 112 672 224 336 672 246 380 100 450

M64X6 2680 77 126 768 256 384 768 299 470 150 600

M72X6 3460 85 144 864 288 432 864 327 510 150 600

Notes : Table-2M1. Minimum EDGE distance is measured from the centerline of the Anchor Bolt to the EDGE of the Concrete, 2. EDGE distance for bolts with sleeves must be increased by (SD-d.)23. Spacing of Bolts with sleeves must be increased by (SD-d.), 4. TPI + thread per Inch

1. ANCHOR BOLTS SHALL BE SET ACCURATELY

AND HELD IN PLACE BY A TEMPLATE.

Notes:

2. SLEEVES SHALL BE USED WHERE SPECIFIED IN

CONSTRUCTION DRAWINGS CENTER SLEEVES

AROUND BOLTS.

3. ANCHOR BOLTS SHALL BE PLACED INSIDE PIER

THE STEEL, BUT SHALL NOT BE TIED TO OR

TOUCHING THE REBAR.

4. FULLY THREADED ASTM A36/A36M RODS MAY

BE USED TO FABRICATE TYPE 2 OR TYPE 2S

ANCHOR BOLTS.

5. FULLY THREADED ASTM A193/A19M RODS

MAY BE USED TO FABRICATE TYPE 3 OR TYPE 3S

ANCHOR BOLTS.

6. ANCHOR BOLT DESIGN SHALL COMPLY WITH

SALES O-005 AND ACI 318-02, APPENDIX D.

7. THE FINAL TIGHTENING OF ANCHOR BOLTS

SHALL BE AS FOLLOWS : AFTER GROUTING OF

THE BASE PLATE THE ANCHOR BOLTS SHALL BE

BROUGHT TO A SNUG TIGHT CONDITION. THIS

IS DEFINED AS THE TIGHTNESS THAT EXISTS

AFTER A FEW IMPACTS FROM AN IMPACT

WRENCH OR THE FULL EFFORT OF A MAN

USING A SPUD WRENCH. AT THIS POINT ALL

SURFACES SHOULD BE IN FULL CONTACT.

8. ANCHOR BOLT SLEEVES SHALL BE FULLY

GROUTED IN ACCORDANCE WITH SAES-0-010

AFTER THE BASE PLATE HAS BEEN POSITIONED.

9. THE SPACING EMBEDMENT AND EDGE DISTANCE

DIMENSIONS SHOWN ON THIS DRAWING ARE

VALUED, EVERY ANCHOR BOLT MUST BE

DESIGN PER ACI 318-02 AND MINIMUM

DIMENSIONS MAY NEED TO BE INCREASED AS

REQUIRED BY DESIGN.

10. TIGHTEN NUTS TO LOCK, APPLY TORQUE TO

BOTTOM NUS, LOCK BOTH NUTS IN POSITION

BY COUNTER PUNCHING THE THREADS AT

JUNCTURE OF NUTS AND BOLT.

DRAWING NO. : AA 036322

6

Longer length than specified could be supplied against special order . Self, Black, Electro galv. Cadmium, Hotdip Galv. Ceramic Fluorpolymer Coating. Coating : ,

Dimensions:

Note :

1. The stud bolts will generally conform to ASTM A 193 Gr: B7, B7M, B16, B8, B8M , A320 B8, B8M, L7, A307B2. Threads will conform to class 2A of united coure threads as per ANSI BI.I. 3. Material : medium carbon chromium Molybdeum steel, CR- Mo alloy Steel ( Gr-Mo).4. As per standard 5. All dimensions are in inches.

STUD BOLTS

Inch. Series , UNC/UN Dimensions

1/2" 13 - 144"

5/8" 11 - 144"

3/4" 10 - 144"

7/8" 9 - 144"

1" 8 - 144"

1-1/8" - 8 144"

1-1/4" - 8 144"

1-3/8" - 8 144"

1-1/2" - 8 144"

1-5/8" - 8 144"

1-3/4" - 8 144"

1-7/8" - 8 144"

2" - 8 144"

2-1/8" - 8 144"

2-1/4" - 8 144"

2-3/8" - 8 144"

2-1/2" - 8 144"

2-5/8" - 8 144"

2-3/4" - 8 144"

2-7/8" - 8 144"

3" - 8 144"

3-1/8" - 8 144"

3-1/4" - 8 144"

3-3/8" - 8 144"

3-1/2" - 8 144"

3-5/8" - 8 144"

3-3/4" - 8 144"

3-7/8" - 8 144"

4" - 8 144"

NominalThreadSize 'D'

TPILength

'L'UNC UN

NominalThreadSize 'D'

TPILength

'L'UNC UN

7

Coating : Grade :

Electro Galv., Hotdip Galv., Stainless Steel Brass 4.8 , 8.8, A307A, A307B, A36, SS304, SS316

Note : 1. The stud bolts will generally conform to ASTM, A307A, A307B, DIN 9752. As per standard

FULLY THREAD ROD

UNC1/4" 20

5/16" 18

3/8" 16

1/2" 13

5/8" 11

3/4" 10

7/8" 9

1" 8

1-1/8" 7

1-1/4" 7

1-1/2" 6

1-3/4" 5

2" 4

2-1/2" 4.5

PITCHMM06 1.0008 1.2510 1.5012 1.7514 2.0016 2.5018 2.5020 2.5022 3.0024 3.0027 3.0030 3.5033 3.5036 4.0039 4.0042 4.5045 4.5048 5.0052 5.0056 5.5064 6.00

PITCH

8

HEXAGON HEAD BOLT / SCREW DIN 931 / 933 (MM THREAD)

CoatingGrade :

Electro Galv., Yellow Passivassionm, Black Hotdip Galv. 4.8, 5.8, 6.8, 8.8, 10.9, 12.9, SS304, SS316

Dimension in accordance with revised standard in the process of being implemented

: ,

NormalThread

Size

Dimensions:

Note :

1. The bolts & screws will generally conform to IS0 4014 , IS0 4017 and DIN 931/933.2. Threads will conform to class 6g of IS0 965/2, Coarse Series. 3. Material High grade carbon / alloy steel.4. Heat Treatment : Property Class 8.8 or 10.9*5. Thread Length LT LT1 for L< 125 LT2 for L> 125 to 200 LT3 for L> 2006. Screw Length equal to or shorter than listed in column 'LFT' will be fully threaded. 7. All dimessions are in millimeters.

PitchW

Max.C

Min.B

Max.H

Nom.R

Min. LT 1 LT 2 LT 3 LFT

LengthRange

L

Length of Thread

M 06 1.0 10.0 11.05 6.0 4.0 0.25 18 - - FT 10-150

M 08 1.25 13.0 14.98 8.0 5.3 0.4 22 28 - FT 12-150

M 10 1.5 17.0- 16.0 18.90-17.80 10.0 6.4 0.4 26 32 45 FT 16.250

M 12 1.75 19.0- 18.0 21.10-20.03 12.0 7.5 0.6 30 36 49 FT 20-250

M 14 2.0 22.0-21.0 24.49-23.25 14.0 8.8 0.6 34 40 53 FT 25-200

M 16 2.0 24.0 26.75 16.0 10.0 0.6 38 44 57 FT 25-400

M 18 2.5 27.0 30.14 18.1 11.5 0.6 42 48 61 FT 35-200

M 20 2.5 30.0 33.53 20.0 12.5 0.8 46 52 65 FT 30-400

M 22 2.5 32.0-34.0 35.72-37.72 22.0 14.0 0.8 50 56 69 FT 40-200

M 24 3.0 36.0 39.98 24.0 15.0 0.8 54 60 73 FT 50-450

M 27 3.0 41.0 45.20 27.0 17.0 1.0 60 66 79 FT 60-300

M 30 3.5 46.0 50.85 30.0 18.7 1.0 66 72 85 FT 60-400

M 33 3.5 50.0 55.37 33.0 21.0 1.0 72 78 91 FT 75-500

M 36 4.0 55.0 60.79 36.0 22.5 1.0 78 84 97 FT 80-500

M 39 4.0 60.0 66.44 39.0 25.0 1.0 84 90 103 FT 80-500

M 42 4.5 65.0 72.02 42.0 26.0 1.2 90 96 109 FT 90-500

M 45 4.5 69.5 77.00 45.0 27.8 1.2 90 96 109 FT 90-500

9

HEXAGON HEAD BOLT / SCREW DIN 931/933 UNC THREAD

CoatingGrade :

: Black Electro Galv. Hotdip Galv, Cadmium Plated 4.8, 5.8, A307A, A307B, SS304, SS316

NormalThread

Size

Dimensions :

Note :

1. The bolt will generally conform to ANSI / ASME B 18.21 Hex Bolts 2. Thread will conform to Class 2A of ANSI B1.1 Coarse Series 3. Material : Low Carbon Steel 4. Bolt lengths equal to or shorter than listed in column / LFT will be fully threaded 5. All dimensions are in inches

TPIUNC

WMax.

CMin.

BMax.

HNom.

RMin. L < 6" LFT

LengthRange

Length of Thread

1/4" 20 0.433 0.511 0.250 5/32" 0.01 3/4" 3/4" FT 1/2"-6"

5/16" 18 0.493 0.560 0.310 7/32" 0.01 7/8" 1/4" FT 1/2"-6"

3/8" 16 0.562 0.650 0.388 1/4" 0.01 1-1/2" 1-1/4" FT 1/2"-6"

1/2" 13 0.750 0.866 0.515 11/32" 0.01 1-1/4" 1-1/2" FT 3/4"-12"

5/8" 11 0.938 1.083 0.642 27/64" 0.02 1-1/2" 2" FT 1"-12"

3/4" 10 1.125 1.299 0.768 1/2" 0.02 1-3/4" 2-1/4" FT 1-1/2"-12"

7/8" 9 1.312 1.516 0.895 37/64" 0.02 2" 2-1/2" FT 1-1/2"-12"

1" 8 1.500 1.732 1.022 43/64" 0.02 2-1/4" 3" FT 1-1/2"-12"

1-1/8" 7 1.688 1.949 1.149 3/4" 0.03 2-1/2" 3-1/4" FT 2"-12"

1-1/4" 7 1.875 2.165 1.277 27/32" 0.03 2-3/4" 4" FT 2"-12"

1-3/8" 6 2.062 2.382 1.404 29/32" 0.03 3" 4-1/2" FT 2-1/2"-12"

1-1/2" 6 2.250 2.598 1.531 1" 0.03 3-1/4" 5" FT 2-1/2"-12"

L >6"

10

HEXAGON HEAD BOLT / SCREW ASTM A307A

Coating : Grade :

Black Hotdip Galv., Electro Galv.ASTM A307A

NormalThread

Size

Dimension

Note :

1. The Bolt will generally conform to ANSI / ASME B 18.2.1 Hex Bolts 2. Thread will conform to class 2A of ANSI B1.1 Coarse Series . 3. Material : Low Carbon Steel 4. Bolt lengths equal to or shorter than those listed in column / LFT will be fully threaded 5. All dimensions are in inches

TPIUNC

WMax.

CMin.

BMax.

HNom.

RMin. L < 6" LFT

LengthRange

Length of Thread

3/8" 16 0.562 0.650 0.388 1/4" 0.01 1.00 1.25 FT 1/2"-8"

1/2" 13 0.750 0.866 0.515 11/32" 0.01 1.25 1.50 FT 3/4"-12"

5/8" 11 0.938 1.083 0.642 27/64" 0.02 1.50 1.75 FT 1"-12"

3/4" 10 1.125 1.299 0.768 1/2" 0.02 1.75 2.00 FT 1-1/2"-12"

7/8" 9 1.312 1.516 0.895 37/64" 0.02 2.00 2.25 FT 1-1/2"-12"

1" 8 1.500 1.732 1.022 43/64" 0.02 2.25 2.50 FT 1-1/2"-12"

1-1/8" 7 1.688 1.949 1.149 3/4" 0.03 2.50 2.75 FT 2"-12"

1-1/4" 7 1.875 2.165 1.277 27/32" 0.03 2.75 3.00 FT 2"-12"

1-3/8" 6 2.062 2.382 1.404 29/32" 0.03 3.00 3.25 FT 2-1/2"-12"

1-1/2" 6 2.250 2.598 1.531 1" 0.03 3.25 3.50 FT 2-1/2"-12"

L > 6"

11

HEXAGON HEAD BOLT/ SCREW ASTM A307B

Coating :Grade :

Black, Hotdip Galv., Electro Galv.ASTM A307B

NormalThread

Size

Dimension

NOTE:

1. The Balts will generally conform to ASNI / ASME B18.2.1Hex Bolts2. Threards will conform to class 2A of ANSI B.1.1.Coarse series3. Material : low corbon steel 4. Bolt lengths equal to or shorter than those listed in column / LFT will be fully threaded. Thread length LT5.ALL dimensions are in inches

TPIUNC

WMax.

CMin.

BMax.

HNom.

RMin. L < 6" LFT

LengthRange

Length of Thread

1/2" 13 0.875 1.010 0.515 11/32" 0.01 1.25 1.50 FT 3/4"-12"

5/8" 11 1.062 1.227 0.642 27/64" 0.02 1.50 1.75 FT 1"-12"

3/4" 10 1.250 1.443 0.768 1/2" 0.02 1.75 2.00 FT 1-1/2"-12"

7/8" 9 1.438 1.660 0.895 37/64" 0.02 2.00 2.25 FT 1-1/2-12"

1" 8 1.625 1.876 1.022 43/64" 0.03 2.25 2.50 FT 1-1/2"-12"

1-1/8" 7 1.812 2.093 1.149 3/4" 0.03 2.50 2.75 FT 2"-16"

1-1/4" 7 2.000 2.309 1.277 27/32" 0.03 2.75 3.00 FT 2"-16"

1-3/8" 6 2.188 2.526 1.404 29/32" 0.03 3.00 3.25 FT 2-1/2"-16"

1-1/2" 6 2.375 2.742 1.531 1" 0.03 3.25 3.50 FT 2-12"-16"

1-5/8" 5 2.618 3.022 1.680 1.10" 0.03 3.50 3.75 FT 3"-16"

1-3/4" 5 2.805 3.238 1.800 1.18" 0.04 3.50 3.75 FT 3-1/2"-16"

1-7/8" 4.5 3.000 3.450 1.928 1.26" 0.04 4.00 4.25 FT 4"-16"

2" 4.5 3.160 3.650 2.041 1.33" 0.04 4.25 4.50 FT 4-1/2"-16"

2-1/4" 4.5 3.550 4.100 2.100 1.495" 0.04 5.00 5.25 FT 5"-16"

2-1/2" 4.0 3.950 4.570 2.234 1.66" 0.04 5.50 5.75 FT 5-1/2"-16"

L > 6"

12

HEAVY HEXAGON HEAD BOLT - / SCREW ASTM A325M

NormalThread

Size

Dimension

Note :

1. The bolts will generally conform to ANSI / ASME 818.2.3.7M Metric heavy Hex Structural Bolts 2. Threads will conform to Class 6g of ANSI B.1.13M Coarse Series 3. Material : High Grade Carbon / Alloy Steel 4. Heat Treatment as per ASTM A325M or ASTM F568M Class 8.85. Thread Length LT LT 1 for L < 100 LT 2 for L > 100 6. All dimensions are in millimeters .

TPIUNC

WMax.

CMin.

BMax.

HNom.

RMin. L T-1 LFT

LengthRange

Length of Thread

M 12 1.75 22.00 25.40 12.70 8.00 0.60 25 25 FT 25-150

M 16 2.00 27.00 31.88 16.70 10.00 0.60 31 38 FT 30-300

M 20 2.50 34.00 39.26 20.84 12.50 0.80 36 43 FT 35-300

M 22 2.50 36.00 41.57 22.84 14.00 0.80 38 45 FT 40-300

M 24 3.00 41.00 47.34 24.84 15.00 1.00 41 48 FT 40-300

M 27 3.00 46.00 52.12 27.84 17.00 1.20 44 51 FT 60-300

M 30 3.50 50.00 57.74 30.84 18.70 1.20 49 56 FT 60-400

M 36 4.00 60.00 69.28 37.00 22.50 1.50 56 63 FT 70-300

M 39 4.00 65.00 75.00 39.50 24.37 1.62 61 68 FT 75-300

LT-2

CoatingGrade :

: Black , Hotdip Galv. Electro Galv.ASTM A325M

13

HEAVY HEXAGON HEAD STRUCTURAL BOLTS ASTM A490

Coating :Grade :

Black, Hotdip Galv., Electro Galv.ASTM A490

NormalThread

Size

Dimension

Note :

1. The Bolts will generally conform to ANSI / ASME B18.2.1 Heavy Hex Structural Bolts 2. Thread will conform to Class 2A of ANSI B.1.1 Coarse Series 3. Material : Alloy Steel 4. Heat Treatment : As per ASTM A490 Type-15. All Dimensions are in inches

TPIUNC

WMax.

CMin.

BMax.

HNom.

RMin. L T

LengthRange

Length of Thread

1/2" 13 0.875 1.010 0.515 5/16" 0.009" 1.00" 1-1/2"-4"

5/8" 11 1.062 1.227 0.642 25/64" 0.021" 1.25" 1-1/2"-8"

3/4" 10 1.250 1.443 0.768 15/32" 0.021" 1.38" 1-1/2"-8"

7/8" 9 1.438 1.660 0.895 35/64" 0.031" 1.50" 1-1/2"-8"

1" 8 1.625 1.876 1.022 39/64" 0.062" 1.75" 1-1/2"-8"

1-1/8" 8 1.812 2.093 1.149 11/16" 0.062" 2.00" 2"-8"

1-1/4" 8 2.000 2.309 1.277 25/32" 0.062" 2.00" 2"-8"

1-3/8" 8 2.188 2.526 1.404 27/32" 0.062" 2.00" 2-1/2"-8"

1-1/2" 8 2.375 2.742 1.531 25/32" 0.062" 2.00" 2-1/2"-8"

14

HEAVY HEXAGON HEAD STRUCTURAL BOLTS ASTM A490M

Coating : Grade :

Black, Hotdip Galv., Electro Galv.ASTM A490M

NormalThread

Size

Dimension

Note :

1. The Bolts will generally conform ANSI / ASME B18.2.3.7M Metric Heavy Hex Structural Bolts 2. Threads will conform to Class 6g of ANSI B.1.13M Coarse Series 3. Material : Carbon / Alloy Steel 4. Heat Treatment as per ASTM A490 OR ASTM F568M Class 10.9 5. Thread Length LT LT1 for L < 100 LT2 for L > 100 6. All dimensions are in millimeters

PitchW

Max.C

Min.B

Max.H

Nom.R

Min. L T-1

LengthRange

L

Length of Thread

M 12 1.75 22.00 25.40 12.70 8.00 0.60 25 25 30-100

M 16 2.00 27.00 31.88 16.70 10.0 0.60 31 38 30-300

M 20 2.50 34.00 39.26 20.84 12.5 0.80 36 43 35-300

M 22 2.50 36.00 41.57 22.84 14.0 0.80 38 45 50-200

M 24 3.00 41.00 47.34 24.84 15.0 1.00 41 48 40-200

M 27 3.00 46.00 52.12 27.84 17.0 1.20 44 51 60-300

M 30 3.50 50.00 57.74 30.84 18.7 1.20 49 56 60-400

M 36 4.00 60.00 69.28 37.00 22.50 1.50 56 63 70-300

M 39 4.00 65.00 75.00 39.5 24.37 1.62 61 68 75-300

L T-2

15

HIGH STRENGTH HEXAGON HEAD BOLTS DIN 6914

Coating : Grade :

Black, Hotdip Galv., Electro Galv.DIN 6914

NormalThread

Size

Dimension

Note :

1. The Bolts will generally conform to DIN 6914 High Strength Hex Head Bolts 2. Threads will conform to Class 6g of DIN 13 Coarse Series 3. Material : High Grade Carbon / Alloy Steel 4. Heat Treatment : To achieve mechanical properties of Class 10.9 5. Thread Length LT1& LT2 6. All dimensions are in millimeters

PitchW

Max.C

Min.B

Max.H

Nom.R

Min. L T-1

LengthRange

L

Length of Thread

M 12 1.75 22.00 23.91 12.70 8.00 1.20 25 25 30-200

M 16 2.00 27.00 29.56 16.70 10.0 1.20 31 38 35-200

M 20 2.50 34.00 35.03 20.84 12.5 1.50 36 43 40-300

M 22 2.50 36.00 39.55 22.84 14.0 1.50 38 45 50-200

M 24 3.00 41.00 45.20 24.84 15.0 1.50 41 48 50-300

M 27 3.00 46.00 50.85 27.84 17.0 2.00 44 51 60-200

M 30 3.50 50.00 55.37 30.84 18.7 2.00 49 56 60-300

M 36 4.00 60.00 66.44 37.00 22.50 2.00 56 63 70-300

M 39 4.00 65.00 75.00 39.5 24.37 1.62 61 68 75-300

L T-2

16

HEXAGON HEAD BOLTS / SCREWS /BS 4190

Coating : Grade :

Mill finish, Electro Galv. & Hotdip Galv.BS 4190

NormalThread

Size

Dimension

Note :

1. The Bolts and Screws will generally conform to BS 4190 2. Threads will conform to Class 6g of BS 4190 Coarse Series 3. Material : Carbon / Alloy Steel 4. Thread Length LT LT1 for L < 125 LT2 for L < 125 to 200 LT3 for L > 200 5. In Bolts / Nut assembly , tightening should be done by rotation of nuts . 6. All dimensions are in millimeters

PitchW

Max.C

Min.B

Max.H

Nom.R

Min.L T-1

LengthRange

L

Length of Thread

M 06 1.00 10.0 11.05 6.0 4.0 0.25 18 - - 25 10-150

M 08 1.25 13.0 14.98 8.0 5.3 0.4 22 28 - 30 12-150

M 10 1.5 17.0-16.0 18.90-17.80 10.0 6.4 0.4 26 32 45 35 16-250

M 12 1.75 19.0-18.0 21.10-20.03 12.0 7.5 0.6 30 36 49 40 20-250

M 16 2.0 24.0 26.75 16.0 10.0 0.6 38 44 57 50 25-400

M 20 2.5 30.0 33.53 20.0 12.5 0.8 46 52 65 60 30-400

M 22 2.5 32.0-34.0 35.72.37.72 22.0 14.0 0.8 50 56 69 65 40-200

M 24 3.0 36.0 39.98 24.0 15.0 0.8 54 60 73 75 50-450

M 27 3.0 41.0 45.20 27.0 17.0 1.0 60 66 79 85 60-300

M 30 3.5 46.0 50.85 30.0 18.7 1.0 66 72 85 85 60-400

M 33 3.5 50.0 55.37 33.0 21.0 1.0 72 78 91 95 75-500

M 36 4.0 55.0 60.79 36.0 22.5 1.0 78 84 97 100 80-500

M 39 4.0 60.0 66.44 39.0 25.0 1.0 84 90 103 110 80-500

M 42 4.5 65.0 72.02 42.0 26.0 1.2 90 96 109 120 90-500

L T-2 L T-3 LFT

17

HEXAGON HEAD BOLTS / SCREWS BS 3692

Coating : Grade :

Mill Finish, Electro Galv. & Hotdip Galv.BS 3692

NormalThread

SizePitch

WMax.

CMin.

BMax.

HNom.

RMin. L T-1

LengthRange

L

Length of Thread

M 06 1.00 10.0 11.05 6.0 4.0 0.25 18 - - 25 10-150

M 08 1.25 13.0 14.98 8.0 5.3 0.4 22 28 - 30 12-150

M 10 1.50 17.0-16.0 18.90-17.80 10.0 6.4 0.4 26 32 45 35 16-250

M 12 1.75 19.0-18.0 21.10-20.03 12.0 7.5 0.6 30 36 49 40 20-250

M 14 2.00 22.0-21.0 24.49-23.25 14.0 8.8 0.6 34 40 53 45 25-200

M 16 2.00 24.0 26.75 16.0 10.0 0.6 38 44 57 50 25-400

M 18 2.50 27.0 30.14 18.0 11.5 0.6 42 48 61 60 35-200

M 20 2.50 30.0 33.53 20.0 12.5 0.8 46 52 65 60 30-400

M 22 2.50 32.0-34.0 35.72-35.72 22.0 14.0 0.8 50 56 69 65 40-200

M 24 3.00 36.0 39.98 24.0 15.0 0.8 54 60 73 75 50-450

M 27 3.00 41.0 45.20 27.0 17.0 1.0 60 66 79 85 60-300

M 30 3.50 46.0 50.85 30.0 18.7 1.0 66 72 85 85 60-400

M 33 3.50 50.0 55.37 33.0 21.0 1.0 72 78 91 95 75-500

M 36 4.00 55.0 60.79 36.0 22.5 1.0 78 84 97 100 80-500

M 39 4.00 60.0 66.44 39.0 25.0 1.0 84 90 103 110 80-500

M 42 4.50 65.0 72.02 42.0 26.0 1.2 90 96 109 120 90-500

L T-2 L T-3 LFT

Dimension

Note :

1. The Bolts and Screws will generally conform to BS 3692 2. Threads will conform to Class 6g of BS 3643 Coarse Series 3. Material : Carbon / Alloy Steel 4. Thread Length LT LT1 L < 125 LT2 for L < 125 to 200 LT3 for L > 200 5. In Bolts / Nut assembly , tightening should be done by rotation of nuts 6. All dimension are in millimeters .

18

HIGH STRENGTH HEXAGON HEAD BOLTS DIN 7990

Coating : Grade :

Black, Hotdip Galv. & Electro Galv.4.6, 5.8, 6.8, 8.8, 10.9

NormalThread

Size

Dimension

Note :

1. The Bolts & Screws will generally conform to DIN 7990 2. Threads will conform to Class 6g of DIN 13 Coarse Series 3. Material : Carbon / Alloy Steel 4. Heat Treatment : To achieve Mechanical properties of Class 4.6, 5.8, 6.8, 8.8, 10.9 5. All dimensions are in millimeters

PitchW

Max.C

Min.B

Max.H

Nom.R

Min. L T-1

LengthRange

L

Length of Thread

M 12 1.75 19.0 21.10 12.70 8.00 0.60 17.75 25-120

M 16 2.00 24.0 26.16 16.70 10.0 0.60 21.00 30-150

M 20 2.50 30.0 32.95 20.84 12.5 0.80 23.50 35-200

M 22 2.50 32.0 35.03 22.84 14.0 0.80 25.50 45-200

M 24 3.00 36.0 39.55 24.84 15.0 0.80 26.00 50-200

M 27 3.00 41.0 45.20 27.84 17.0 1.00 29.00 70-200

M 30 3.50 46.0 50.85 30.84 19.0 1.00 30.50 80-300

19

WTE

WTE

307A

WTE

307B

WTE

307C

WTE

AB36

WTE

AB55

WTE

WTE

B8

WTE

B8M

BOLT STRENGTH REQUIREMENTS BY GRADE

20

A325M

WTE

WTE

A325

WTE

WTE

A449

WTE

B7

WTE

BC

WTE

AB105

WTE

L7

WTE

L43

M12 - M24

M27 - M39

4

4

8S

21

WTE

A 490

WTE

A 490

WTE

WTE

BD

22

Dimensions:-

Note :

1. The nut will generally conform to DIN 934 , DIN 555 & BS3692.2. Thread will conform to class 6H of DIN 13 Coarse Series 3. Heat Treatment : to achieve mechanical properties to property Class 8 or 10 4. Nuts of property Class 8 are used with bolts of property Class 8.8 Nuts of property Class 10 are used with bolts of property Class 10.9 (In general nuts of a highter property class can replace nut of lower property class in a joint) 5. In Bolts / Nut assembly tightening should be done by rotation of nuts 6. All dimension are in millimeters

HEXAGON NUTS ISO 934 / DIN 555

Coating : Grade :

Electro Galv., Black, Hotdip Galv., Cadmium Plated 4, 6, 8, 10, SS304, SS316

ThreadSize

M06 1.00 10.00 11.05 5.00M08 1.25 13.00 14.38 6.50M10 1.50 17.00 18.90 8.00M12 1.75 19.00 21.00 10.00M14 2.00 22.00 24.49 11.00M16 2.00 24.00 26.75 13.00M18 2.50 27.00 29.56 15.00M20 2.50 30.00 32.95 16.00M22 2.50 32.00 35.03 18.00M24 3.00 36.00 39.55 19.00M27 3.00 41.00 45.20 22.00M30 3.50 46.00 50.85 24.00M33 3.50 50.00 55.37 26.00M36 4.00 55.00 60.79 29.00M39 4.00 60.00 66.44 31.00M42 4.50 65.00 71.30 34.00M45 4.50 69.64 76.25 36.40M48 5.00 74.28 81.40 38.75M52 5.00 80.00 88.00 51.00M56 5.50 86.50 96.00 54.75M60 5.50 92.85 101.50 58.50M64 6.00 99.00 108.00 62.25

PitchW

Max.C

Max.H

Norm.

23

HEAVY HEXAGON NUTS ASTM A563/Gr. A & C

Coating : Grade :

Electro Galv., Black, Hotdip Galv.ASTM, A563 , Gr. A&C

ThreadSize

Dimension in inch series UNC/UNF.

Note :

1. The nut will generally conform ANSI / ASME 18.2.2 heavy hex nuts.2. Threads will conform to class 2B of ANSI B1.1 3. In Bolts / Nut assembly tightening should be done by rotation of nuts. Torque values as recommended in tables for bolt 4. All dimension are in inches.

1/2" 13 0.875" 1.010" 0.484"9/16" 12 0.938" 1.083" 0.547"5/8" 11 1.062" 1.227" 0.609"3/4" 10 1.250" 1.443" 0.734"7/8" 9 1.238" 1.660" 0.859"

1" 8 1.625" 1.876" 0.984"1-1/8" 7 1.812" 2.093" 1.109"1-1/4" 7 2.000" 2.309" 1.219"1-3/8" 6 2.188" 2.526" 1.344"1-1/2" 6 2.375" 2.742" 1.469"1-5/8" 5 2.562" 2.959" 1.594"1-3/4" 5 2.750" 3.175" 1.719"1-7/8" 4.5 2.938" 3.392" 1.844"

2" 4.5 3.125" 3.608" 1.969"2-1/4" 4 3.500" 4.041" 2.203"2-1/2" 4 3.875" 4.474" 2.453"2-3/4" 4 4.250" 4.907" 2.703"

3" 4 4.625" 5.340" 2.953"3-1/4" 4 5.000" 5.774" 3.188"3-1/2" 4 5.375" 6.207" 3.438"3-3/4" 4 5.755" 6.650" 3.683"

4" 4 6.142" 7.093" 3.930"

PTIUNC/UN

WMax.

CMax.

HNorm.

24

HEAVY HEXAGON NUTS ASTM A563 M (10S)

Coating : Grade :

Electro Galv., Black, Hotdip Galv. ASTM A563-10S

ThreadSize

Dimensions:

Note :

1. The nut will generally conform ANSI B18.2.4.6M metric Heavy Hex Nuts.2. Threads will conform to class 6H of ANSI B1.1.13M for coarse series. 3. Heat Treatment : to achieve mechanical properties of Property Class 8S or 10S of ASTM A563M.4. Nuts of property Class 8S are used with bolts of ASTM A325M type 1 and 2 ( con coated).5. Nuts of property Class 10S are used with Bolts of ASTM A325M Type 1 & 2 (zinc - coated).6. In general Nuts of a higher properties Class can replace Nuts of Lower properties Class in a joint.7. In Bolts / Nut assembly tightening should be done by rotation of nuts.8. Sizes in brackets are non preferred standards.9. All dimension are in millimeter.

M12 1.75 21.00 24.25 12.10M14 2.00 24.00 27.71 13.95M16 2.00 27.00 31.18 16.75M20 2.50 34.00 39.26 20.05M22 2.50 36.00 41.57 22.95M24 3.00 41.00 47.34 23.55M27 3.00 46.00 53.12 26.95M30 3.50 50.00 57.74 29.90M33 3.50 56.00 65.00 32.90M36 4.00 61.00 71.00 35.90M39 4.00 66.00 77.00 38.90M42 4.50 71.00 83.00 41.90M45 4.50 76.00 89.00 44.90M48 5.00 82.00 95.00 42.90M52 5.00 86.50 100.30 51.00M56 5.50 93.00 107.00 54.75M60 5.50 100.00 115.00 58.50M64 6.00 106.00 123.00 62.25M72 6.00 120.00 138.00 70.00M76 6.00 126.50 146.00 74.00M82 6.00 136.50 157.00 80.00M90 6.00 136.50 173.00 87.50

PitchW

Max.C

Max.H

Norm.

25

HEAVY HEXAGON NUTS ASTM A-194

Coating : Grade :

Electro Galv., Black, Hotdip Galv.2H, 2HM, GR4, GR7, B8, B8M

ThreadSize

Dimension:-

Note :

1. The nut will generally conform ANSI / ASME B 18 .2.2 Heavy Hex Nuts.2. Threads will conform to class 2B of ANSI B1.1.3. Material and heat treatment : To achive mechanical properties of grade 2H, 4 and 7 which conform the requirements of ASTM A194.4. In Bolts / Nut assembly , Tightening should be done by rotaion of nut Tarque values as recommended in tables for bolts.5. All dimensions are in inches. Inch series , UNC / UNF dimensions

PTIUNC/UN

WMax.

CMax.

HNorm.

1/2" 13 0.875" 1.010" 0.4849/16" 12 0.938" 1.083" 0.547

5/8" 11 1.062" 1.227" 0.6093/4" 10 1.150" 1.443" 0.7347/8" 9 1.238" 1.660" 0.859

1" 8 1.625" 1.876" 0.9841-1/8" 8 1.812" 2.093" 1.1091-1/4" 8 2.000" 2.309" 1.2191-3/8" 8 2.188" 2.526" 1.3441-1/2" 8 2.375" 2.742" 1.4691-5/8" 8 2.562" 2.959" 1.5941-3/4" 8 2.750" 3.175" 1.7191-7/8" 8 2.938" 3.392" 1.844

2" 8 3.125" 3.608" 1.9692-1/4" 8 3.500" 4.041" 2.2032-1/2" 8 3.875" 4.474" 2.4532-3/4" 8 4.250" 4.907" 2.703

3" 8 4.625" 5.340" 2.9533-1/4" 8 5.000" 5.774" 3.1883-1/2" 8 5.375" 6.207" 3.4383-3/4" 8 5.755" 6.650" 3.683

4" 8 6.142" 7.093" 3.930

26

HIGH STRENGTH HEXAGON NUTS DIN 6915

Dimensions

Note :

1. The nuts will generally conform DIN 6915.2. Threads will conform to Class 6H of DIN-13 Coarse Series.3. Heat treatment : To achieve mechanical properties of Class 10.9.4. Nuts of Property Class 10 are used with bolts of Property Class 10.9 ( In general nuts of a higher property class can replace nuts of a lower property class in a joint.5. In Bolts/Nut assembly, tightening should be done by rotation of nuts.6. All dimensions are in millimeters.

M16 2.00 24.00 26.75 13.00

M18 2.50 27.00 29.56 15.00

M20 2.50 30.00 32.95 16.00

M22 2.50 32.00 35.03 18.00

M24 3.00 36.00 39.55 19.00

M27 3.00 41.00 45.20 22.00

M30 3.50 46.00 50.85 24.00

M33 3.50 50.00 55.37 26.00

M36 4.00 55.00 60.79 29.00

M39 4.00 60.00 66.44 31.00

M42 4.50 65.00 71.30 34.00

Coating : Grade :

Mill Finish, Electro Galv. & Hotdip Galv.DIN 6915

27

HIGH STRENGTH HEXAGON NUTS BS 4190

Dimensions

Note :

1. The Hex nuts will generally conform to BS 4190.2. Threads will conform to Class 6H of BS 3643 Coarse Series.3. Heat treatment : To achieve mechanical properties of Class 8 or 10.4. Nuts of Property class 8 are used with bolts of property Class 10.9 (In general nuts of a higher property class can replace nuts of a lower property class in a joint).5. In bolts / Nut assembly , tightening should be done by rotation of nuts. All dimensions are in millimeters

M06 1.00 10.00 10.89 5.375

M08 1.25 13.00 14.25 6.875

M10 1.50 17.00 18.72 80.450

M12 1.75 19.00 20.88 10.450

M16 2.00 24.30 26.17 13.550

M20 2.50 30.00 32.53 16.550

M22 2.50 32.00 35.03 18.550

M24 3.00 36.00 39.55 19.650

M27 3.00 41.00 45.20 22.650

M30 3.50 46.00 50.85 24.650

M33 3.50 50.00 55.37 26.650

M36 4.00 55.00 60.79 29.650

M39 4.00 60.00 66.44 31.800

M42 4.50 65.00 72.09 34.800

Coating :Grade :

Mill finish, Electro Galv. & Hotdip Galv.BS 4190

28

FLAT WASHER DIN 125 A / DIN 126 A

Coating : Grade :

Black, Electro Galv., Cadmium Plated & Hotdip Galv.ASTM A36, C45, CRC, SS 304, SS316, Brass, Copper, Silicon Branze

M 06 6.6 12.5 1.60

M 08 8.6 16 1.60

M 10 11 21 2.00

M 12 14 24 2.50

M 14 16 28 2.50

M 16 18 30 3.15

M 18 20 34 3.15

M 20 22 37 3.15

M 22 24 39 3.15

M 24 26 44 4.00

M 27 30 50 4.00

M 30 33 56 4.00

M 33 36 60 5.00

M 36 39 66 5.00

M 39 42 72 6.00

M 42 45 78 6.00

M 45 48 85 8.00

M 48 22 92 8.00

M 52 56 100 8.00

M 56 60 108 8.00

M 60 64 116 8.00

M 64 68 124 8.00

MMInternal

DiaExternal

DiaThickness

29

FENDER WASHER

Coating : Grade :

Self, Black, Electro Galv. Cadmium, Hotdip Galv.ASTM A36, CRC, SS 304, SS 316, Brass, Copper, Silicon Branze

04 4.3 12 1.00

05 5.3 15 1.20

06 6.4 18 1.60

08 8.4 24 2.00

10 10.5 30 2.50

12 13 37 3.00

14 15 44 3.00

16 17 50 3.00

20 21 60 3.50

22 23.5 68 3.50

24 25.5 72 3.50

MMInternal

DiaExternal

DiaThickness

30

FLAT WASHER ASTM F436 M

Coating : Grade :

Self, Black, Electro Galv., Hotdip Galv, Ceramic Fluoropolymer Coatings SAE1045, Hardened

12 13.50 17.5 1.50

16 17.50 24.0 3.00

20 20.60 38.0 3.00

22 26.50 45.0 3.50

24 28.50 50.0 3.50

27 30.00 60.0 3.50

30 32.50 62.0 3.50

33 34.50 68.0 4.00

36 38.00 74.0 4.50

39 42.00 76.0 4.50

42 45.60 84.0 4.50

45 48.60 92.0 4.50

48 52.70 95.0 4.50

52 58.70 104.0 6.10

56 62.70 107.0 6.10

60 66.60 114.0 6.10

64 70.70 118.0 6.10

72 78.70 130.0 6.10

76 82.80 137.0 6.10

80 86.90 142.0 6.10

90 96.90 159.0 6.10

100 107.90 176.0 6.10

MMInternal

DiaExternal

DiaThickness

F 436

WTE

31

HELICAL SPRING LOCK WAHERS DIN 127

Coating : Grade :

Black, Electro Galv. Hotdip Galv.SAE1045 , Hardened, A36, C4S, SS304, SS316, Brass Copper

06 6.5 9.00 1.20

08 8.5 12.00 1.25

10 10.5 15.00 1.50

12 13.50 17.50 1.50

16 17.50 24.00 3.00

20 20.60 38.00 3.00

22 23.50 45.00 3.50

24 28.50 50.00 3.50

27 30.00 60.00 3.50

30 32.50 62.00 3.50

33 34.50 68.00 4.00

36 38.00 74.00 4.50

39 42.00 76.00 4.50

MMInternal

DiaExternal

DiaThickness

32

U - BOLT

Coating : Grade :

Electro Galv., Hotdip Galv., PVC Coating and Stainless Steel ASTM A36, A307, SS 304, SS 316, B7 and 8.8

Pipe Size

1/2" M08 32 55 30

3/4" M08 38 60 32

1" M08 44 75 40

1-1/4" M10 55 85 45

1-1/2" M10 61 95 45

2" M13 78 105 50

2-1/2" M13 92 118 50

3" M13 104 130 50

4" M13 130 160 50

6" M16 187 215 60

8" M16 236 265 60

10" M16 292 315 60

12" M18 345 370 60

14" M18 377 410 70

16" M22 430 465 80

18" M22 484 515 90

20" M25 535 570 90

22" M25 595 635 90

24" M25 637 670 90

D L SV

33

PIPE SUPPORT CLAMPS WITH AND WITHOUT RUBBER

Hotdip Galv., PVC Coating and Electro Galv.ASTM A36, SS304, SS316

Coating : Grade :

3/8" 600 KG 200KG 17-20

1/2" 600 KG 200KG 21-24

3/4" 600 KG 200KG 25-28

1" 600 KG 200KG 32-35

1-1/4" 600 KG 200KG 42-45

1-1/2" 600 KG 200KG 48-51

2" 600 KG 200KG 58-63

2-1/2" 600 KG 200KG 62-78

3" 600 KG 200KG 84-89

3-1/2" 600 KG 200KG 96-102

4" 600 KG 200KG 109-114

4-1/2" 600 KG 200KG 121-127

5" 600 KG 200KG 133-140

6" 600 KG 200KG 159-168

8" 600 KG 200KG 207-219

10" 600 KG 200KG 265-276

12" 600 KG 200KG 315-330

16" 600 KG 200KG 419-435

Size Breaking Load Maximum Load Span Range

COMBINATION NUT WELD M 8 & M10 Thickness : Dia < 100 MM 2 mm, Dia > 100 MM 2.5 mmWidth : 20 mmM6 Safety Screw

34

ADJUSTABLE CLEVIS HANGER

Size Range :Max Temp : 650 F.Features : Designed with the yoke outside of lower U- strap so the yoke cannot slide. toward the center of the bolt , thus bending of the bolt is minimized . Spacer sleeves used for size 16 thru 36 Components : Top yoke , bottom strap and bolt or stud with nut assembled. Installation : Hanger load nut ABOVE clevis must be tightened securely to assure proper hanger performance

Note : Punched forming holes may be present on certain sizes of this clevis hanger. These holes are solely for the purpose of manufacturing and do not affect structural integrity or load carrying capacities of these Hangers.

inches thru 36 inches

CoatingGrade :

: Electro Galv., Hotdip Galv.ASTM A36, SS304, SS316

PipeSize

Max.Recom. Load

Ibs.

Weight(Approx) Ibs.

per 100 Upper Lower

Size of Steel

A B C DAdjustment

F GE

1/2" 610 34 1/8 x 1" 1/8" x1" 3/8" 11-1/16" 2-1/8" 2-1/2" 7/8" 7/16" 1/4"

3/4" 610 39 1/8 x 1" 1/8" x1" 3/8" 1-7/8" 2-7/16" 2-1/2" 1" 1/2" 1/4"

1" 730 44 1/8 x 1" 1/8" x1" 3/8" 2-1/8" 2-13/16" 2-1/2" 1-1/4" 5/8" 1/4"

1.1/4" 730 45 1/8 x 1" 1/8" x1" 3/8" 2-9/16" 3-7/16" 2-1/2" 1-3/4" 7/8" 1/4"

1.1/2" 730 55 1/8 x 1" 1/8" x1" 3/8" 3" 4" 2-1/2" 2-1/8" 1-1/16" 1/4"

2" 730 61 1/8 x 1" 1/8" x1" 3/8" 3-1/16" 4-7/8" 2-1/2" 2-15/16" 1-5/8" 1/4"

2.1/2" 1350 140 3/16" x 1-1/4" 3/16" x 1-1/4" 1/2" 4-1/16" 6-1/8" 3" 3-13/16" 2" 3/8"

3" 1350 152 3/16" x 1-1/4" 3/16" x 1-1/4" 1/2" 4-3/4" 6-9/16" 3" 3-7/8" 1-3/4" 3/8"

3.1/2" 1350 170 3/16" x 1-1/4" 3/16" x 1-1/4" 1/2" 4.15/16" 6-15/16" 3" 4-1/16" 1-3/4" 3/8"

4" 1430 213 1/4 " x 1-1/4" 3/16" x 1-1/4" 5/8" 5-9/16" 7-13/16" 3-1/2" 4-1/2" 1-15/16" 3/8"

5" 1430 244 1/4 x 1-1/4" 3/16" x 1-1/4" 5/8" 6-3/16" 9" 3-1/2" 5-1/8" 1-3/4" 1/2"

6" 1940 357 1/4 x 1-1/4" 3/16" x 1-1/2" 3/4" 6-15/16" 10-1/8" 4" 5-5/8" 1-7/8" 1/2"

8" 2000 497 1/4" x 1-1/2" 3/16" x 1-3/4" 7/8" 8-3/8" 12-5/8" 4-1/4" 7" 2-1/8" 5/8"

10" 3600 880 1/4" x 1-3/4" 1/4" x 1-3/4" 7/8" 9-7/8" 15-1/4" 4-1/2" 8-3/8" 2-1/4" 3/4"

12" 3800 1142 3/8" x 2" 1/4" x 2" 7/8" 11-1/2" 18" 4-1/2" 10-3/16" 3" 3/4"

14" 4200 1484 1/2" x 2" 1/4" x 2" 1" 12-7/16" 19-7/16" 5-1/4" 10-13/16" 2-15/16" 7/8"

16" 4600 2104 1/2" x 2-1/2 " 1/4" x 2 " 1" 14-1/16" 22-1/16" 6" 12-7/16" 2-5/8" 1"

18" 4800 2442 1/2" x 2-1/2 " 1/4" x 2 " 1" 15-1/2" 24-3/4" 6-1/2" 13-15/16" 3-7/8" 1-1/8"

20" 4800 4265 3/4" x 3" 3/8" x 3" 1-1/4" 17-1/4" 27-3/8" 7" 14-7/16" 4" 1-1/4"

24" 4800 4853 3/4" x 3" 3/8" x 3" 1-1/4" 19-5/8" 31-5/8" 7-1/2" 17-1/2" 4-1/4" 1-1/4"

30" 6000 6994 1 x 3" 3/8" x 3" 1-1/4" 24-1/8" 39-1/8" 8-1/4" 21-7/8" 5" 1-1/4"

36" - 7716 1 x 3" 3/8" x 3" 1-1/4" 27-1/8" 46-3/16" 8-1/4" 25-1/2" 5-1/2" 1-1/4"

35

CHANNEL CLAMPS

Coating : Grade :

Electro Galv., Hotdip Galv., PVC Coated ASTM A36, SS304, SS316

1/4" .060 400 83/8" .060 400 8 CPLT1/2" .060 400 9 CPLT5/8" .060 400 10 CPLT3/4" .060 400 117/8" .060 400 12 CPLT

1" .075 600 141-1/8" .075 600 15 SS CPLT1-1/4" .075 600 16 SS1-3/8" .075 600 17 SS CPLT1-1/2" .075 600 18 SS1-5/8" .075 600 19 SS CPLT1-3/4" .105 800 29 SS1-7/8" .105 800 28 SS

2" .105 800 31 SS2-1/8" .105 800 32 SS CPLT2-1/4" .105 800 33 SS2-3/8" .105 800 34 SS2-1/2" .105 800 35 SS2-5/8" .105 800 37 SS CPLT2-3/4" .105 800 38 SS2-7/8" .105 800 40 SS

3" .105 800 41 SS3-1/8" .105 800 43 SS CPLT3-1/4" .105 800 45 SS3-3/8" .105 800 46 SS3-1/2" .105 800 47 SS3-5/8" .105 800 56 SS CPLT3-3/4" .105 800 58 SS3-7/8" .125 1,000 60 SS

4" .125 1,000 62 SS4-1/8" .125 1,000 62 SS CPLT4-1/4" .125 1,000 64 SS4-3/8" .125 1,000 66 SS4-1/2" .125 1,000 67 SS

4-5/8" .125 1,000 704-3/4" .125 1,000 724-7/8" .125 1,000 73

5" .125 1,000 745-1/8" .125 1,000 765-1/4" .125 1,000 775-3/8" .125 1,000 785-1/2" .125 1,000 795-5/8" .135 1,000 885-3/4" .135 1,000 905-7/8" .135 1,000 92

6" .135 1,000 946-1/8" .135 1,000 966-1/4" .135 1,000 986-3/8" .135 1,000 996-1/2" .135 1,000 1006-5/8" .135 1,000 1026-3/4" .135 1,000 1046-7/8" .135 1,000 106

7" .135 1,000 1087-1/8" .135 1,000 1107-1/4" .135 1,000 1127-1/2" .135 1,000 1147-1/2" .135 1,000 1167-5/8" .135 1,000 1177-3/4" .135 1,000 1197-7/8" .135 1,000 121

8" .135 1,000 1238-1/8" .135 1,000 1258-1/4" .135 1,000 1268-3/8" .135 1,000 1288-1/2" .135 1,000 1298-5/8" .135 1,000 130

O.D.Size

StockThickness

HangingLoad

Rating/ibs.

Wt./100 pcs

Other FinishesAvailable

StockThickness

Wt./100 pcs

HangingLoad

Rating/ibs.

O.D.Size

36

SUPPORT ASSEMBLY COMPONENTS

O.D.Size

ThicknessGages

AWt./

100 pcs

1/4" 1-3/16" 16 4

3/8" 1-5/16" 16 51/2" 1-7/16" 16 65/8" 1-5/8" 14 83/4" 1-3/4" 14 97/8" 1-7/8" 14 10

1" 2" 14 11

3/8" 300 27

1/2" 300 29

3/4" 300 30

1" 400 31

1-1/4" 400 38

1-1/2" 500 40

2" 500 47

2-1/2" 500 66

3" 500 78

3-1/2" 500 87

4" 500 90

PipeSize

LoadRating

Wt./100 pcs

PipeSize

A B CDesignLoad

Wt./100 pcs

1/2" 2-7/8" 9/32" 7/16" 500 233/4" 3-1/8" 9/32" 7/16" 500 26

1" 3-3/8" 9/32" 7/16" 500 311-1/4" 3-3/4" 9/32" 7/16" 500 351-1/2" 3-7/8" 9/32" 7/16" 500 39

2" 5-3/4" 7/16" 11/16" 1,000 942-1/2" 6-1/4" 7/16" 11/16" 1,000 114

3" 6-7/8" 7/16" 11/16" 1,000 1333-1/2" 7-3/8" 7/16" 11/16" 1,000 152

4" 7-7/8" 7/16" 11/16" 1,000 1765" 9" 7/16" 11/16" 1,000 1986" 10" 7/16" 11/16" 1,000 225

37

SUPPORT ASSEMBLY COMPONENTS

Part No. Max

O.D. Size A B

Wt/100 pcs

C

Note: Available in Electro-Galv. steel, Type 304Stainless Steel or Aluminum

PS 3101 3/8" 7/16" 1-5/8" 14 6

PS 3102 1/2" 9/16" 1-3/4" 14 7

PS 3103 3/4" 1-3/16" 2" 14 12

PS 3104 1" 1-1/16" 2-1/2" 14 15

PS 3105 1-1/4" 1-5/16" 2-1/2" 14 19

PS 3106 1-1/2" 1-9/16" 2-3/4" 14 20

PS 3107 1-3/4" 1-13/16" 3" 12 25

PS 3108 2" 2-1/16" 3-1/4" 12 35

PS 3109 2-3/8" 2-7/16" 3-5/8" 12 41

PS 3110 2-3/4" 2-13/16" 4" 12 60

PS 3111 3-1/4" 3-5/16" 4-1/2" 12 74

PS 3112 3-3/4" 3-13/16" 5" 12 91

PS 3113 4" 4-1/16" 5-1/4" 12 100

PS 3114 4-3/8" 4-7/16" 5-5/8" 12 115

PS 3115 4-3/4" 4-13/16" 6" 12 125

38

PIPE CLAMP AND RISERS

LIGHT DUTY PIPE CLAMP-2 BOLT Size Range : inch thru 36 inches

Coating : Grade :

Electro Galv., Hotdip Galv., PVC CoatingASTM A36, SS304, SS316

PipeSize 0@ 650 F B C D E F

Stock SizeG H

Approx. WeightIbs. Per Each

1/2" 500 445 1" 1/2" 1-17/32" 1" 5/16" 1/8" x 1" 1-17/32" 0.29

3/4" 500 445 1-1/8" 1/2" 1-21/32" 1-1/8" 5/16" 1/8" x 1" 1-21/32" 0.33

1" 500 445 1-1/8" 1/2" 1-29/32" 1-3/8" 5/16" 1/8" x 1" 1-21/32" 0.35

1.1/4" 500 445 1-7/16" 1/2" 1-31/32" 1-7/16" 5/16" 1/8" x 1" 1-31/32" 0.37

1.1/2" 800 715 1-9/16" 1/2" 2-5/32" 1-5/8" 5/16" 1/8" x 1" 2-3/32" 0.43

2" 1040 930 2-1/8" 1/2" 2-3/4" 2-1/8" 1/2" 1/4" x 1" 2-3/4" 1.1

2.1/2" 1040 930 2-1/2" 5/8" 3-1/4" 2-5/8" 1/2" 1/4" x 1" 3-1/8" 1.2

3" 1040 930 2-13/16" 5/8" 3-9/16" 2-15/16" 1/2" 1/4" x 1" 3-7/16" 1.4

3.1/2" 1040 930 3-1/8" 5/8" 3-13/16" 33/16" 1/2" 1/4" x 1" 3-3/4" 1.5

4" 1040 930 3-4/16" 3/4" 4-3/8" 35/8" 5/8" 1/4" x1-1/4" 4-3/16" 2.3

5" 1040 930 4" 3/4" 4-15/16" 43/16" 5/8" 1/4" x1-1/4" 4-3/4" 2.3

6" 1615 1440 4-7/8" 7/8" 5-7/8" 5" 3/4" 3/8" x 1-1/4" 5-3/4" 5.4

8" 1615 1440 6" 1" 7" 61/8" 3/4" 3/8" x 1-1/4" 6-7/8" 6.5

10" 2490 2220 7-5/16" 1" 8-9/16" 77/16" 7/8" 1/2" x 2" 8-7/16" 13.6

12" 2490 2220 8-1/4" 1" 9-9/16" 87/16" 7/8" 1/2" x 2" 9-3/8" 15.2

14" 2490 2220 9" 1-1/8" 10-5/8" 91/4" 7/8" 1/2" x 2-1/2" 10-3/8" 20.5

16" 2490 2220 10" 1-1/8" 11-5/8" 101/4" 7/8" 1/2" x 2-1/2" 11-3/8" 22.3

18" 3060 2730 11-1/2" 1-1/4" 13" 115/8" 1" 5/8" x 2-1/2" 12.7/8" 31.6

20" 3060 2730 12-1/2" 1-3/8" 14-1/8" 123/4" 11/8" 5/8" x 2-1/2" 13-7/8" 35.8

24" 3060 2730 15" 1-5/8" 16-7/8" 151/4" 11/4" 5/8" x 3" 16-5/8" 53.1

30" 3500 3360 18-1/4" 2" 21-1/4" 19" 13/4" 3/4" x 4" 20-5/8" 113.9

36" 4000 3570 22-1/2" 2-1/2" 25-1/2" 23" 2" 1" x 5" 25" 219.0

0@ 750 F

Max. Recom. Load, Ibs.

39

PIPE CLAMPS AND RISERS

LIGHT DUTY PIPE CLAMP - THREE BOLTSize Range : inch thru 24 inches

Coating :Grade :

Electro Galv., Hotdip Galv., PVC Coating ASTM A36, SS 304, SS316

PipeSize 0@ 650 F B C D E F

Stock SizeG H

Approx. WeightIbs. Per Each

1/2" 950 850 15/16" 5/16" 2-7/8" 2-7/16" 3/8" 3/16" x 1" 1-3/8" 0.66

3/4" 950 850 15/16" 5/8" 2-7/8" 2-7/16" 3/8" 3/16" x 1" 1-3/8" 0.70

1" 950 850 1-1/16" 5/8" 3" 2-9/16" 3/8" 3/16" x 1" 1-1/2" 0.76

1-1/4" 950 850 1-1/4" 5/8" 3-1/8" 2-11/16" 3/8" 3/16" x 1" 1-11/16" 0.81

1-1/2" 1545 1380 1-.13/16" 11/16" 4-7/8" 4-1/8" 5/8" 1/4" x 1.1/4" 2-3/8" 2.30

2" 1545 1380 2-1/8" 11/16" 5-7/8" 5-1/8" 5/8" 1/4" x 1.1/4" 2-11/16" 2.30

2-1/2" 1545 1380 2-5/16" 11/16" 6-1/8" 5-3/8" 5/8" 1/4" x 1.1/4" 2-15/16" 2.70

3" 1545 1380 2-3/4" 11/16" 6-11/16" 5-15/16" 5/8" 1/4" x 1.1/4" 3-1/2" 3.00

4" 2500 2230 3-3/8" 11/16" 7-5/8" 6-1/2" 3/4" 5/16" x 2" 4-1/2" 6.70

5" 2500 2230 3-15/16" 11/16" 8-1/8" 7" 3/4" 5/16" x 2" 5" 7.00

6" 2865 2555 4-3/4" 17/16" 9-11/16" 8-9/16" 7/8" 3/8" x 2.1/2" 6-1/8" 11.50

8" 2865 2555 5-3/4" 17/16" 10-11/16" 9-9/16" 7/8" 3/8" x 1/2" 7-1/8" 13.20

10" 3240 2890 6-7/8" 17/16" 12" 10-7/16" 1" 1/2" x 2.1/2" 8-1/4" 19.80

12" 3240 2890 7-7/8" 17/16" 13" 11-7/16" 1" 1/2" x 2.1/2" 9-1/4" 22.30

14" 4300 3835 9-1/16" 2" 14-5/16" 12-11/16" 1-1/4" 5/8" x 3" 10-11/16" 37.70

16" 4300 3835 10-1/16" 2" 15-5/16" 13-11/16" 1-1/4" 5/8" x 3" 11-11/16" 41.40

18" 4300 3835 11-1/16" 2" 16-5/16" 14-11/16" 1-1/4" 5/8" x 3" 12-11/16" 44.90

20" 5490 4900 12-3/8" 2" 17-5/8" 15-7/8" 1-1/2" 3/4" x 3" 14" 57.30

24" 4500 4015 14-3/8" 2" 19-5/8" 17-7/8" 1-1/2" 3/4" x 3" 16" 65.90

28" 6000 4015 17-1/2" 2.1/4" 24-1/4" 21-3/4" 1-1/2" 3/4" x 4" 20" 112.30

30" 7500 5340 18-1/2" 2.1/2" 26-1/8" 23-3/8" 1-1/2" 3/4" x 5" 21-1/4" 150.00

36" 10500 6675 22-1/2" 3" 32-1/4" 28-3/4" 1-3/4" 1 x 5" 26" 257.00

0@ 750 F

Max. Recom. Load, Ibs.

40

G

PIPE CLAMP & RISERS

HEAVY DUTY PIPE CLAMP - DOUBLE BOLT

Dimension:-Size to 24

Coating : Grade :

Electro Galv., Hotdip Galv., PVC Coating ASTM A36, SS304, SS316

Pipe Size Max. Reco. Loadlbs.

Approx. Weightlbs. Per 100

Length A

Stock Size Bolt Size

1/2" 255 123 9-3/8" 3/16" x 1-1/4" 3/8" x 1-1/2" 3/4" 255 136 9-3/8" 3/16" x 1-1/4" 3/8" x 1-1/2"

1" 255 138 9-5/8" 3/16" x 1-1/4" 3/8" x 1-1/2" 1-1/4" 255 195 10" 1/4" x 1-1/4" 3/8" x 1-1/2" 1-1/2" 255 201 10-3/8" 1/4" x 1-1/4" 3/8" x 1-1/2"

2" 255 217 10-3/4" 1/4" x 1-1/4" 7/16" x 2" 2-1/2" 390 229 11-1/4" 1/4" x 1-1/4" 7/16" x 2"

3" 530 250 12" 1/4" x 1-1/4" 7/16" x 2"3-1/2" 670 330 13" 1/4" x 1-1/2" 1/2" x 2"

4" 810 242 13-1/2" 1/4" x 1-1/2" 1/2" x 2" 5" 1160 493 14-1/2" 1/4" x 2" 1/2" x 2" 6" 1570 526 15-1/2" 1/4" x 2" 1/2" x 2" 8" 2500 986 18-1/2" 3/8" x 2" 5/8 x 2-1/2"

10" 2500 1112 20-1/4" 3/8" x 2" 5/8 x 2-1/2"12" 2700 1662 22-3/4" 1/2" x 2" 5/8 x 3"14" 2700 1925 24" 1/2" x 2" 5/8 x 3"16" 2900 3250 26" 5/8" x 2-1/2" 3/4" x 3-1/2" 18" 2900 3375 28" 3/8" x 2-1/2" 3/4" x 3-1/2" 20" 2900 3500 30" 5/8" x 2-1/2" 3/4" x 3-1/2" 24" 2900 5070 36" 5/8" x 3" 7/8" x 3-1/2"

A

41

TURN BUCKLE

Coating : Black, Hotdip Galv. & Electro Galv.

Material : Forged steel Service: Provides adjustment up to 6 inches for heavy loads Ordering : Specify red size , figure number, name and finish

3/8" 730 540 7-1/4" 3/8" 341/2" 1350 1010 7-1/2" 3/4" 475/8" 2160 1610 7-3/4" 7/8" 863/4" 3230 2420 8-1/4" 1.1/8" 1347/8" 4480 3360 8-1/2" 1.1/4" 190

1" 5900 4420 8-1/2" 1.1/2" 2471-1/8" 7660 5560 9" 1.5/8" 3381-1/4" 8500 7140 9" 1.5/8" 3301-1/2" 13800 10370 9-3/4" 1.7/8" 6301-3/4" 18600 14000 10-1/2" 2.1/4" 780

2" 24600 18460 11" 2.1/2" 11952-1/4" 32300 24260 12-1/4" 3.1/8" 27002-1/2" 39800 29880 12-1/4" 3.1/8" 2690

0@650 FTS Bolt SizePipe Size 0@750 F

Max. Recom. Load lbs.

Material : Service :

Forged steel for use high temperature piping installations

Features : Supports loads equal to the full limitation of the hanger rod provides flexible connection when use with straight thread rods Ordering : Specify Size number, figure number name rod tapping finish

1 3/8" 730 540 1-1/2" 1-3/16" 1/2" 2" 1-3/8" 11/16" 20

1/2" 1350 1010 57

5/8" 2160 1610 55

3/4" 3230 2420 170

2 7/8" 4480 3360 2" 3/4" 3/4" 2-5/8" 1-15/16" 1" 165

1" 5900 4420 380

3 1-1/8" 7660 5560 2-1/2" 1" 1" 3-3/8" 2-3/8" 1-1/4" 373

1-1/4" 9500 7140 364

1-1/2" 13800 10370 345

4 1-3/4" 18600 14000 4" 1-1/2" 1-1/2" 6-1/4" 4" 2-1/4" 1628

2" 24600 18460 1675

5 2-1/4" 32300 24260 4" 1-1/2" 1-1/2" 6-1/4" 4" 2-1/4" 1675

2-1/2" 39800 29880 1695

PipeSize

Road SizeA

B C D E F GApprox. Weight

lbs. Per Each0@650 F 0@750 F

Max. Recom. Load lbs.

T

S

A

O

F

C

E

C

E

F

D

LIFTING HOOK

42

STUD ANCHOR ( THROUGH BOLT )

Coating : Grade :

Electro Galv. Yellow, Hotdip Galv.4.8, 8.8, SS304, SS316

Length M 06 M 10 M 16 M 24M 20M 08 M 12

M 40

M 45

M 50

M 60

M 70

M 80

M 90

M100

M110

M120

M130

M140

M150

M160

M170

M180

M190

M200

M210

M220

M230

M240

M250

M275

M300

M350

M400

M450

43

EXPANSION SHIELD ( FIX BOLT )

Coating :Grade :

Yellow, White and Hotdip 4.8, 8.8, SS 304, SS316, Brass

M 06 1.00 M 08 25 MM 2.1 10

M 08 1.25 M 10 30 MM 2.8 14

M 10 1.50 M 12 40 MM 4.2 19

M 12 1.-75 M 16 50 MM 6.2 22

M 16 2.00 M 20 65 MM 10.2 30

M 20 2.50 M 25 80 MM 15.7 38

M 24 3.00 M 30 110 MM 20.0 55

PictchSafe Load

(Kn)Anchor Length

l (mm)Thread Depth

C (mm)Size A(mm)

Anchor OuterDia d (mm)

DROP IN ANCHOR (UNIFIX )

C

d a

Type A (Polish)

Type B (Knurling)

Coating :Grade :

Yellow White and Zinc Plated 4.8, 8.8, SS304 (A2), SS316 (A4), BRASS

Size A(mm) Pictch

Anchor OuterDia d (mm)

Anchor Lengthl (mm)

Safe Working Load(kn)

Recmd. Torquee for300 N/mm2

Bolt Length(mm)

M 06 1.00 M 12 45 MM 3.3 2.1 6.5 50,60,65,80,100

M 08 1.25 M 14 55 MM 4.8 4.4 15.0 60,65,75,90,100,120,140

M 10 1.50 M 16 65 MM 6.2 6.1 27.0 75,90,100,120,140,150,160

M 12 1.75 M 20 85 MM 9.7 12.4 50.0 90,100,120,140,150,170

M 16 2.00 M 25 425 MM 21.3 27.6 120.0 180,200

M 20 2.50 M 32 140 MM 31.2 36.4 230.0 150,175,200,250

M 24 3.00 M 38 160 MM 38.0 50.0 400.0 200,250,300

44

EYE BOLT CLOSE & OPEN TYPE

Coating :Grade :

Electro Galv., Hotdip Galv.ASTM A36, A307B, SS304, SS316

M 40

M 45

M 50

M 60

M 70

M 80

M 90

M 100

M 110

M 120

M 130

M 140

M 150

M 200

M 250

M 300

Length M 06 M 10M 08 M 12

45

WOLOUF UNISTRUT CHANNEL & ACCESSORIES

46

UNISTRUT CHANNEL

Plain Channel W1000 ( 41 x 41 )

SPAN OR COLUMNUNSUPPORTEDHEIGHT IN MM

UNIFORM LOAD AT175 N / mm2

STRESS KG.

DEFLECTION INMM AT 175N / mm2

UNIFORM LOAD MAX.DEFLEC. OF

1/200th SPAN KG

MAX LOAD OFCOLUMN LOADED@ CENTROID KG.

MAX LOAD OFCOLUMN LOADED@ SLOT FACE KG.


1/360th SPAN KG

SLOTTED CHANNEL

Coating : Grade :

Electro Galv., Hotdip Galv.ASTM A36, SS304, SS316

Slotted Channel W 1000T ( 41X 41)

250 1638 0.27 - - 5351 1660

500 819 1.05 - - 5100 1635

750 546 2.35 - 483 4412 1557

1000 409 4.18 - 217 3284 1389

1250 327 6.54 313 174 2436 1211

1500 273 2.41 217 120 1899 1062

1750 234 12.81 159 88 1546 941

2000 204 16.73 122 67 1297 843

2250 182 21.18 96 53 1113 761

2500 163 26.15 78 43 970 691

2750 148 31.64 64 35 (855) (631)

3000 136 37.65 54 30 (761) (578)


UNIFORM LOAD AT175 N / mm2

STRESS KG.

DEFLECTION INMM AT 175N / mm2


1/200th SPAN KG




1/360th SPAN KG

250 1769 0.23 - - 5869 1693

500 884 0.95 - - 5379 1650

750 589 2.15 - 571 4479 1554

1000 442 3.82 - 321 3373 1395

1250 353 5.97 - 205 2556 1232

1500 294 8.60 257 142 2020 1093

1750 252 11.70 188 104 1656 976

2000 221 15.29 144 80 1395 879

2250 196 19.35 114 63 1198 797

2500 176 23.89 92 51 1044 725

2750 160 28.91 76 42 (919) (663)

3000 147 34.40 64 35 (816) (607)

W1000

W1000T

2.88

2.73

1.5 to 3.0

1.5 to 3.0

3 Mtr

3 Mtr

6 Mtr

6 Mtr

PL

PL

PG

PG

HG

HG

SS

SS

3.35

3.00

Kg/m mm 2cm r cm4I cm 4I cm3Z cm 3Z cm r cm7.21

6.10

3.10

2.87

1.46

1.42

9.23

9.17

4.47

4.44

1.66

1.74

Part No WeightMaterialThickness

StandardLength

FinishArea ofSection

Elements of SectionAxis X-X

Elements of SectionAxis Y-Y

47

Coating : Grade :


UNISTRUT CHANNEL

250 - - - - 11952 2880

500 - - - - 11682 2864

750 1670 1.21 - - 11186 2833

1000 1253 2.15 - - 10451 2783

1250 1002 3.36 - - 9305 2695

1500 835 4.84 - 718 7790 2551

1750 716 6.59 - 523 6293 2367

2000 626 8.61 - 404 5068 2170

2250 556 10.89 - 319 4127 1977

2500 501 13.45 465 258 3410 1796

2750 455 16.27 384 213 2858 1630

3000 417 19.37 323 179 (2427) (1480)


UNIFORM LOAD AT2175 N / mm

STRESS KG.

DEFLECTION INMM AT 175

2N / mm


1/200 SPAN KG.




1/360 SPAN KG.

Combination Channel (Back to Back) W 1001 ( 41 x 82 )

W10001 5.77 1.5 to 3.0 3 Mtr 6 Mtr PL PG HG SS 6.70

Kg/m mm 2cm r cm4I cm 4I cm3Z cm 3Z cm r cm

36.27 8.78 2.32 18.46 8.94 1.66


StandardLength




82

48

UNISTRUT CHANNEL

Coating : Grade :


Plain channel W 3300 (41 x 21)



STRESS KG.


2N / mm


1/200th SPAN KG




1/360th SPAN KG

250 553 0.45 - - 3393 1042

500 276 1.81 - 212 3379 995

750 184 4.07 169 94 2198 859

1000 138 7.24 95 53 1353 690

1250 110 11.32 61 33 896 548

1500 92 16.30 42 23 (634) (437)

1750 79 22.19 31 - (471) (353)

2000 69 28.99 23 - - -

Slotted Channel W 3300 ( 41 x 21 )



STRESS KG.


2N / mm


1/200th SPAN KG




1/360th SPAN KG

250 508 0.50 - - - -

500 254 2.01 - 174 - -

750 169 4.54 139 77 - -

1000 127 8.07 78 43 - -

1250 101 12.61 50 27 - -

1500 84 18.17 34 - - -

1750 72 24.73 25 - - -

2000 63 32.30 - - - -

W3300

W3300T

1.91

1.76

1.5 to 3.0

1.5 to 3.0

3 Mtr

3 Mtr

6 Mtr

6 Mtr

PL

PL

PG

PG

HG

HG

SS

SS

2.32

1.97

Kg/m mm 2cm r cm4I cm 4I cm3Z cm 3Z cm r cm1.19

0.98

0.97

0.89

0.71

0.70

5.34

5.29

2.59

2.56

1.51

1.63


StandardLength




49

CoatingGrade :

: Electro Galv., Hotdip Galv.ASTM A36, SS304, SS316

UNISTRUT CANTILVERS

CANTILEVERSCantilever Arm Hot Dipped Galvanised Two hole fixing Shallow slotted arm Length 325mm

Cantilever Arm Hot Dipped Galvanised Two hole fixing Shallow slotted arm Length 475mm



Cantilever Arm Hot Dipped Galvanised Two hole fixing shallow slotted side mounted arm Length 160mm



Cantilever Arm Hot Dipped Galvanised Two hole fixing Deep plain arm length 160mm





Cantilever Arm Hot Dipped Galvanised Two hole fixing Deep slotted arm length 175mm

Cantilever Arm Zinc Platted Two hole fixing Deep slotted arm length 175mm



STAINLESS STEEL ALSO AVAILABLE ON SPECIAL ORDER







Deep Back to Back Cantilever Arms Hot Dipped Galvanised two hole fixing Length 160mm





Cantilever Arm Hot Dipped Galvanised Two hole fixing Deep plain side mounted arm Length 160mm




50

UNISTRUT CHANNEL FITTINGS / BRACKETERY

51

UNISTRUT CHANNEL FITTINGS / BRACKETERY

52

LONG SPRING , SHORT SPRING AND WITHOUT SPRING CHANNEL NUTS

Coating : Grade :

Electro Galv., Hotdip Galv.ASTM A36, SS304 , SS316

M6 x 34.5 x 19 x 6 1/4 x 1 /4"

M8 x 34.5 x 19 x 8 5/16" x 5 / 16"

M10 x 34.5 x 19 x 9.2 3/8 "x 3 /8 "

M12 x 34.5 x 19 x 9.2 1/2" x 3/8"

M16 x 34.5 x 19 x 12 1/2" x 1 /2 "

M6 x 34.5 x 19 x 6 1/4 x 1 /4"

M8 x 34.5 x 19 x 8 5/16" x 5 / 16"

M10 x 34.5 x 19 x 9.2 3/8 "x 3 /8 "

M12 x 34.5 x 19 x 9.2 1/2" x 3/8"

M16 x 34.5 x 19 x 12 1/2" x 1 /2 "

M6 x 34.5 x 19 x 6 1/4 x 1 /4"

M8 x 34.5 x 19 x 8 5/16" x 5 / 16"

M10 x 34.5 x 19 x 9.2 3/8 "x 3 /8 "

M12 x 34.5 x 19 x 9.2 1/2" x 3/8"

M16 x 34.5 x 19 x 12 1/2" x 1 /2 "

Long Spring Channel Nut (Spring 35-40) Size (MM) x (H) Size (Inch) x (H)

Short Spring Channel Nut (Spring 18-20)

Channel Nut Without Spring

53

CHAIN LINK FENCE

54

CHAIN LINK FENCE

55

CHAIN LINK FENCE

56

AR

A

B B SOLT

CHAIN LINK FENCE FITTINGS

WIRE ROPE FITTINGS

57

SCAFFOLDING & SHUTTERING ITEMS

SCAFFOLD TUBES

FEATURES

Tubes and fittings scaffolding are widely used for supporting man and materials , tools and

tackles during construction , alternation , demolition and maintences worke because of

their several advantages over conventional type of timber / bamboo scaffolding .

Ease and speed in erection and dismantling

Scopes for multiple and varied re - use ( Life and Flexibility in use )

Rigidly and stability during erection "Ease in storing and maintenance

Reliable assessment of performance with adequate scopes for safety

Eco Friendly

PRESSED COUPLER PRESSED COUPER

Pressed double Coupler is used for joining 40 mm NB tubes at 90 degress angle to

other tubes, ledgers or props .

Size

48.3 x 48.3 mm 0.0

48.30 x 60.30 mm 0.0

Sleeve coupler designed with wrapping facility for end to end connection of my

scoffold tube to form buff joint connection . Suitable for joints where tension will be

developed in the tubes .

FORGED COUPLERS FORGED DOUBLE COUPLER

Forged double couples provides stronger grip easier to handle when connecting standard or

ledger to ledger or to my tube or right angle .

FORGED SWIVEL COUPLER

Features the same facilities as the pressed type except that it is design with added

grip strength and easier to handle .

COUPLERS

58

SCAFFOLDING

59

SCAFFOLDING

60

SCAFFOLDING ITEM

SOLIDER SYSTEM

CORNER SOLUTIONS

HORIZONTAL SHORING

This system designed to cover wide ranges of construction and to with stand the high pressure exerted

while pouring concrete members . The soldiers which is produced in many lengths , can be assembled in

combination to suit any height of pouring . Clear unobstructed webs provides for easy fixing of the

system . which means infinite flexibility in design . On the other hand , the holes in the web provides

additional options for fixing and also for accessories . The comprehensive range of accessories enables

the system to assemble rigid Structure used for both temporary and permanent works, The system can

be used for extensive applications . e.g single or double soldiers shuttering system , inclined support ,

vertical shoring , horizontal support , supporting beam , and as space frame .

The rods have been specifically to match load capacity of the soldier . The tie rod in 17 mm in diameter

and uses a self cleaning coil thread to reduce the maintenance The full of 60 kn permissible load can be

fitted to the soldier of any heights to form a conventional platforms for pouring of concrete . On higher

forms platform on another level can be provided to enables the fixing and removal of lies on complete

safety , To support the forms during erection and between use, stabilizes can be fitted , These have a

wide base for safety and are easily adjustable for angle, For higher pours or when extra required ,

inclined struts can be used as push - pull props .

SOLDIER SYSTEM - Features and Benefits Wide range of size ( any size can be accommodated ) .

Versatile .

In ladder frame

Full design flexibility .

Less labor work ( man power and time , form of removal and placement , Excellent face surface of

concrete , higher pressure can be accommodated , vertical shoring )

Soldiers can be used as heavy duty vertical shores. In this application the system can achieve up to 100

KN depending on the un - braced length protion of the soldiers - Conventional tubes , can be used to

brace the soldiers structure for extra stability . The system provides safety and simplicity in erection and

service stages. By adding the adjustable shoring adapter at top and bottom with the heavy duty fork

head at top, efficient sharing system can be formed to support very heavy loads. Many other uses can

be covered by this system such as a black propping for heavy londs in site location , support of pre- cast

units temporary suppot during steel work erection operations and many more application .

In this applications the system used to provide safe and heavy duty struts for excavation works or to

support existing building during reconstruction , special plates are erected of ends to ensure to ensure

maximum safety in use. The socket fits over the end of shoring adapters and angle ledge ensures that

the shore is supported safety on the walling timber or steel 1-5 .

61

SCAFFOLDING ITEM

COLUMN CLAMPS

CUP LOCK

ADJUSTABLE JACKS

Available in solid & hollow design with various adjustments from 75 mm to 660 mm with malleable / cast

iron nuts . Ease and speed erection and dismantling . Scope for multiple and varied re - use ( Life and

flexibility in use ) Rigidity and stability Ease in storing and maintenance . Reliable assessment of

performance with adequate so, Adjustable Stirrp Head available in sold and hollow design with various from

75 mm to 660mm with molleble / cast from nuts , to accept steel or timber runners at top of scaffold verticals

Standardsizes

32 min dia, 225 mm adjustment

36 mm dia, 350 mm adjustment

36 mm dia , 450 mm adjustment

COLUMN CLAMPS COLUMN CLAMPS Consist of tour arms manufactured from 6 mm and 8 mm flat mind

steel to suit a wide range of column dimension as given in this table below . FRO GREATER SPEED &

ECONOMY Fitex industries limited is uickely adjusted and secured to ensure to ensure absolute rigidly

of steel and timber forwork for concreate columns , beans hanging sofhits and casting to steel

stanctions . They save time, labour and material by completely eliminating the cutting to waste of

timber and eventual deterioration and scrapping of materials The arms of all three sizes are

interchangeable and suitable for square and rectangular sections . The slot arrangement allows for

simple , speedy and accurate adjustment to my dimensions with in the size range . Three are no loose

part to be last or mislaid and the clamps can be used and unlimited number of times. Wadge are secured

to the arms by a flexible galvanized steel wire instead of the usual chain and ring. The greater strength

and pliability of this wire provides the solution to the perpetual and costly problem of broken chains

last wedges , CUP LOCK is a proven multipurpose scaffolding system which can be used for all forms of access and support structures

in the building and construction industries .

SPEED OF ERECTION CUPLOCK

Provides major savings in erection and dismantling times thus minimizing on site cast .it can be erected 75 faster

traditional scaffoldings. When not in use, its medular construction ensure space requirements for storage .

SIMPLICITY AND STRENGTH The success of cuplock lies in the node point or faster method . Four can be fastened of one

time making a very rigid connection . the horizontal directely on the verticals and are firmly clamped by the action of

the cup. There are no loose parts to lose . The rigid node point allows for high horizontal loads experienced with a 57

KN leg load .

VERSATALITY

When investing in equipments it must be as versatile as possible . Cuplock can erected for straight , curved and circular

configuration for both access and support , and for independent and mobile towers .

DURABILITY

With no loose part and with corrosion protection it can be easily stored and maintained. Designed to be tough. Cuplock

is highly resistance to damage. When not in use , its modular construction ensure minimal space requirement for

storage . 62

SCAFFOLDING ITEM :

BEAM CLAMPS

VERTICAL/STANDARD CUPLOCK

DROP HEAD

BEAM CLAMPS are used on the beam supports. and can be removed with in 52 hours of concreting.

Beam clamps are suitable for use with steel shuttering . FOR FAST ACCURATE AND RIGID CLAMPING OF

BEAM FORM WORK AND CASTING . The fasted method of clamping beam form work and casting .

simple , speedy and accurate adjustment to any dimension with in the size range . Longer base tubes

of ordinary scaffold tube can be use of extra wide beams . Can be used with both steel & timber

shuttering . Rabust, light weight construction , No tools required, Easily dismantled for compact

storage and transport .

Cuplocks unique locking device is formed by two cups a fixed lower cup which cup which is welds to the vertical at

preloaded intervals and a sliding uppers cup . The forged blads ends of the horizontal are located in to the lower cup, the

upper cup is moved down and rotated to sucure the components in place . and the connection is tightened by a hammer

blow to give a positive and rigid fit, Cuplock cup joint make it ideal for circular scaffolding , providing access to tanks and

tower . The flexibllity makes the system particulary suited to oil refineries and chemical plants , Cuplocks horizontal can

be positioned at any from 0 to 360 degrees . This features will accommodate any radius or curve without the need for

tube and clamps , boys may be either trapezium shapped or alternately rectangular and trapezium shaped .

The quick action drop head supplied complete with nuts and bolts is designed to fit on standard props or adaptors for

Cuplocks scaffolding . They allow panels and beams to be struck and re - used ofter only 3 or 4 days , leaving the

support in position for the remainder or the curing period of the concrete slab . The primary head remains in contact

with the concerte while the secondary head and its supporting wedge are released by a single hammer blow. The

height of the drop head in 214 mm and the striking distance allows the beans and panelsto drop only 115 mm for

the their safe removal a marked improvement in terms of speed and safety compared with other system . The

drophead had a load carrying capacity of 40 KN . Special care has been taken to ensure that beams cannot be

accidentally dislodged once with the drop head primed.

63

SCAFFOLDING ITEM

VERTICAL PROPS AND TYPES

PROPS , provides the ideal and the mast economics method of support of all kinds of form work, slabs ,

beams , walls and columns . They are also invaluable for a wide variety of applications in general building

construction and repair work. Eliminate the costly labor and time consumed in cutting to length , wedging

nailing when used in the vertical as a prop .

1. The high tensile steel pin is located a slot in the outer section and a hole on the inner section for coarse

adjustment . The cast collar located the pin gives adjustment for lending and striking .

2. A self cleaning device on the collar , nut which automatically clears the thread of concreate , and dirt

where the nut in rotated thus assuring quick east adjustment .

3. A hole boss on the collar nut which make it easy to turn in confined space. By interesting. a bar in the hole

base plates and head pates are holed for use with slab form work .

4. TPI ACME square thread ensure load bearing strength at this critical point .

5. Standard special shores pins are also available on request.

6. Bean type or U head props are also available according to customers requirement .

We have quickly adjusted and secured to ensure absolute of steel and timber form work for concreate

columns, beans, hanging soffits and casting to steel stanchions.

They save time, labour and material by completely eliminating the cutting of waste of timber and eventual

deterioration and scarping of materils . The arm of al three sizes are interchangeable and suitable for

square and rectangular sections . The stot arrangement allows for simple, speedy and accurate adjustment

to any dimension with in the size range . There are no loose parts to be mislaid and the clamps can be used on

unlimited number of times.

Wadge are secured to the arms by a flexible galvanized steel wire instead of the usual chain and ring . The

greater strength and pliability of this wire provides the solution to the perpetual and costly problem of

broken chains and wedges .

Unique Features

FOR GREATER SPEED & ECONOMY

64

GRATINGS

65

GRATINGS

Pre - straightened and cut

66

GRATINGS

TYPE OF GRATINGS

67

GRATINGS

LOAD TABLE FOR ELECTROFORGED STEEL GRATING-METRIC

U- Uniformly distributed load in kg/sq.mC- Concentrated load in kg/meter width atmid-spanD - Deflection in millimenters

Spans to left of heavy line producea deflection of 6 mm of less undera uniform load of 500 kg/sq.m Thisdeflection is recommended as perBS 4592-1970

Unit Stress - 1650 kg/Sq m.

LOAD FACTOR

Wolouf

For different types of Wolouf floor grating

29.5

to us

68

To convert to kilonwtons ( KN) multiply ( nominal breaking strength ) by 8.896 ; 1lb = new tons ( n ) for regular Galv. Strength , Deduct 10%

WIRE ROPE

6 X 16 Classification / Bright ( Uncoated ) , or Drawn Galvanized , Fiber Core7 X 16 Classification / Bright ( Uncoated ) , or Drawn Galvanized , Steel Core

Nominal Diameter Nominal Strength Approximate Mass

Improved Plow Steel

Inches MM Tons Metric Tons LB/FT KG/M

1/4"5/16"3/8"

7/16"1/2"

9/16"5/8"3/4"7/8"

1"1-1/8"1-1/4"1-3/8"1-1/2"1-5/8"1-3/4"1-7/8"

2"2-1/8"2-1/4"2-3/8"2-1/2"2-5/8"2-3/4"

6.58.09.5

j-bolt embedment design

Documents

hexagon head boltscrew

hexagon head boltscrew

anchor bolt type

heavy hexagon nuts astm

high strength hexagon

hexagon nuts iso

hexagon head boltsscrew

anchor bolt jtype