6m

6m

JAMES DONALDSON TIMBER LTD

Few additions to the home or garden can match a timber deck for usefulness, natural beauty and sheer enjoyment. Decks offer an outdoor living space for dining, entertaining or simply relaxing.This range of decking components offers a choice of modern or traditional designs to create your ideal deck.

Design is straight forward using timber joists, deck boards, posts, handrails, baserails and spindles to create safe and attractive decking areas. No advanced carpentry skills are required. If you can drill holes, tighten screws and bolts, read a spirit level and use a saw then building a deck should not pose a problem.

Structural Components

Decking

DIMENSIONS47mm x 100mm 4.8m47mm x 150mm 4.8m

USED FORTo create the framework of the deck.

DIMENSIONS33mm x 120mm Various lengths 28mm x 145mm 3.6, 4.2, 4.8m

USED FORFitted to the frame creating the surface. Deck boards are reversible offering either a grooved or smooth surface.

DIMENSIONS70mm x 70mm Various lengths90mm x 90mm Various lengths

USED FORTo create a raised deck or level a sloping site. Can also be extended through the deck to create posts for railings.

Deck Joist

Deck Boards

Deck Post

DIMENSIONS33mm x 75mm Various lengths

USED FORTo create decorative balustrading in conjunction with spindles and baserail.

Handrail

DIMENSIONS82mm x 82mm x 1250mm

USED FORTo create decorative balustrading with other components.

Edwardian Ball Cap Posts

DIMENSIONS42mm x 42mm x 900mm

USED FORTo create decorative balustrading in conjunction with handrails and baserail.

DIMENSIONS82mm x 82mm Various Lengths

USED FORTo create decorative balustrading with other components

Spindles

Patrice Newel R4A

Osmose Naturewood preserved wood is the name given to timber that has been preserved with an Osmose preservative system which is based on copper and an organic co-biocide (Alkaline Copper Quaternary). ACQ systems have provided proven performance for over a decade in locations throughout Europe, North America, Australia and Japan.

Osmose Naturewood preserved wood can be used for fencing, timber decking, landscaping timbers and construction timbers.

DIMENSIONS33mm x 78mm

USED FORTo create decorative balustrading in conjunction with spindles and handrail.

Baserail

DIMENSIONS12mm x 42mm Various Lengths

USED FORTo infill between spindles.

Baserail Spacer

Osmose Naturewood is the brand name for wood pressure treated with a copper and organic co-biocide based preservative system.• Wear a dust mask and goggles when cutting or sanding wood.• Wear gloves when working with wood.• Some preservative may migrate from the treated wood into soil/ water or may dislodge from the treated

wood surface upon contact with skin. Wash exposed skin areas thoroughly.• All sawdust and construction debris should be cleaned up and disposed of after construction.• Do not burn preserved wood.• Wash work clothes separately from other household clothing before re-use.• Preserved wood should not be used where it may come into direct contact or indirect contact with

drinking water, except for uses involving incidental contact such as fresh water docks and bridges.• Do not use preserved wood under circumstances where the preservative may become a component

of food, animal feed, or beehives.• Do not use preserved wood for mulch.• Only preserved wood that is visibly clean and free of surface residue should be used.• Do not use preserved wood in direct contact with aluminium. • If wood is to be used in an interior application and becomes wet during construction, it should be

allowed to dry before being covered or enclosed.• Disposal Recommendations: Preserved wood may be disposed of in landfills or burned in commercial

or industrial incinerators or boilers in accordance with National and Regional regulations.• If you desire to apply a paint, stain, clear water repellent or other finish to your preservative treated

wood, we recommend following the manufacturers instructions and label of the finishing product. Before you start, we recommend you apply the finishing product to a small test area before finishing the entire project to ensure it provides the intended result before proceeding.

• Certain metal products (Inc fastener, hardware and flashing) may corrode when in direct contact with wood treated with copper based preservatives. To prevent premature corrosion and failure it is important to follow the recommendations of the manufacturer for all metal products.

• Mould growth can and does occur on the surface of many products, including treated or untreated wood, during prolonged surface exposure to excessive moisture conditions. To remove mould from treated wood surfaces, wood should be allowed to dry. Typically, mild soap and water can be used to remove surface mould.

For further information visit www.osmose-europe.com

Contact Details

JAMES DONALDSON TIMBER LTD

Important Information

*Registered Trademarks and Trademarks of Protim Solignum Limited.*All products are produced by independently owned and operated wood processing facilities. All other Registered Trademarks and Trademarks are Trademarks of their respective owners.