january 12, 2003 - tiger tanks...

Lot #22B,

LABIDCO Industrial Estate

La Brea, Trinidad, West Indies.

Ph #: 1 868 651 -1544 / 0130

Fax #: 1 868 648 - 9763

[email protected]

EQUIPMENT PROFILE

mailto:[email protected]

Tiger Tanks Trinidad Unlimited Equipment Profile.

January 2015

Dear Sirs,

Tiger Tanks Trinidad Unlimited is a fully registered local company, with equipment support from

Tiger Tanks Offshore Rental Ltd. of Beaumont, Texas, USA, which has been operating since

1997. Tiger Tanks brings to the energy industry a wealth of experience and innovative

manufacturing of Transport Containers and Storage Vessels. Since then our equipment fleet has

expanded to include, not only Cargo Carrying Equipment (CCEs), but also tanks of varying

construction and design specifications, vacuum tankers, pumps, steam cleaners, and specialized

safety equipment to name a few.

Please find attached detailed information on our equipment fleet

Should you have any queries or require additional information please do not hesitate to contact

the any of the below listed Key Personnel.

Name Position Mobile Contact

Numbers

Email Address

Denis Latiff General Manager (868) 678-9868 [email protected]

Navin Persad Assistant General

Manager

(868) 760-5756 [email protected]

Anthony

Superville Management Advisor (868) 387-1030 [email protected]

General Email Address [email protected]

Yours Respectfully,

Tiger Tanks Trinidad Unlimited

Navin Persad

Assistant General Manager

Office: (868) 651-1460/ 651-1544/ 651-0130

Fax: (868) 648-9763






January 2015

Table of Contents

1.0 Background .................................................................................................... 4

2.0 Introduction ................................................................................................... 5

3.0 Cargo Carrying Equipment (CCEs) : DNV 2.7-1 Certified ............................. 6

4.0 Cargo Carrying Equipment (CCEs) : (BS 12079 Certified) ......................... 36

5.0 Cuttings Boxes and Fluid Transport Tanks Descriptions ........................... 40

6.0 Storage Tanks Descriptions ......................................................................... 42

7.0 Pumps, Pressure Washers and Steam Cleaners ........................................... 44

8.0 Steel Vacuum Trailers ................................................................................. 46

9.0 TTTU Dry Vacuum Unit ............................................................................. 47

10.0 Tank Cleaning/ Confined Space Entry Works ............................................ 48

11.0 Cooling Tower Cleaning/ Dewatering ........................................................ 49

12.0 8’x16’ ECOmats ......................................................................................... 52

13.0 Waste Management ..................................................................................... 53

13.1 Waste Type Capabilities: ............................................................................. 57

14.0 Oil Spill Response ......................................................................................... 58

15.0 Safety Equipment Sales & Rental ............................................................... 60

16.0 Blast Resistant Buildings ............................................................................. 61


January 2015

1.0 Background

Tiger Tanks Trinidad Unlimited (referred to as “TTTU”) formed in October 2003, is the largest

supplier of Logistic Cargo Carrying Equipment in the region, supplying to ALL of the major

energy companies. As manufacturers of our own equipment, Tiger Tanks adheres to U.L. listings

STI Steel Tank Institute ABS, ASME, AWS and DOT Standards and are code rated with a “U”

and “R” stamp. All of our logistic equipment are fully tested and certified to meet British

Standard BS EN 12079. We can also provide DNV certified equipment. We take pride in

pleasing our customers, and in doing so, we can build to your required specifications and needs.

To complement our fleet of rental equipment, Tiger Tanks Trinidad Unlimited other services

include:

Confined Space Entry/ Tank Cleaning (offshore/onshore) using our portable High

Powered Vacuum Units

Solid and Liquid Waste Transport with our Vacuum Truck services and specialized

CCU’s

Waste Management

Tank repairs and Installations

Procurement and Consultancy Services

Diaphragm & centrifugal pump rentals (electric & diesel)

Pressure washer & steam cleaners rentals (electric & diesel)

Offshore Vacuum Units for liquids and solids

Cooling Tower Cleaning

Catalyst Extraction

Oil Spill Response Services

Safety Equipment Sale & Rental

Eco Mats


January 2015

2.0 Introduction

Information for the following has been provided:

1. Cargo Carrying Equipment, Cuttings Boxes, Fluid Transport Tanks, Storage Tanks,

Pumps, Pressure Washers and Steam Cleaners.

2. Vacuum Road Tank Wagons (130-bbl and 60-bbl units).

3. Specialized equipment and services

4. Safety Equipment.

5. Oil Spill Response Equipment

6. Eco Mats

7. Tank cleaning/ confined space entry equipment

8. Dewatering Equipment

9. Blast Resistant Buildings


January 2015

3.0 Cargo Carrying Equipment (CCEs) : DNV 2.7-1 Certified

10’ Half Height Containers

Built to DNV 2.7-1

Tare weight 1,880 kgs

Max gross weight 7,000 kgs

Payload 5,120 kgs

Outside dimensions:

118” long x 96” wide x 48”

high

Swinging door

20’ Half Height Containers

Built to DNV 2.7-1



Payload 9,910 kgs

Outside dimensions: 20’ long x 8’

wide x 4’3” high


January 2015

DNV 2.7-1 SST UNIT 6X6'FULL OPENING DOOR BASKET

COMMON USES: The DNV 2.7-1 Super Sack Transport [SST] is designed for secure

transportation and storage

for pre-packaged and medium to small items.

SPECIFICATIONS • Designed, tested, constructed, inspected with offshore identification markings to EN 12079-

1:2006/ DNV2.7-1: 2006 in support of IMO 860 [1998]./SEPCo OPS0055/API RP

Sec.2.4.2c&d

• Third-party certification on design, testing, construction and inspection

• Built in tie down rings for efficiently securing a load

• Design Temperature is -20C

• Internal Dimensions -

-Length: 1,676 mm [66”][5’6”]

-Width: 1,727 mm [68”][5’8”]

-Height: 1,245 mm [49’][4’1”]

• External Dimensions -

-Length: 1,930 mm [76”][6’4”]

-Width: 1,930 mm[76”][6’4”]

- Height: 1,245 mm[63”][5’3”]

. Max Gross Weight: 11,020 LBS [4,998KG]

. Est. Tare Weight: 2,820 LBS [1,279 KG]

• Pay Load Weight: 8,200 LBS [3,700 KG]


January 2015

4’ x 12’ DNV 2.7-1 Double Door Basket

Common Uses

The 4’x12’ Double Door Basket is designed for safely transporting scaffolding and scaffolding

racks. The double door gives a full opening side which allows forklift loading and unloading.

Thus reducing time and labor when compared with conventional hand or crane loading

techniques. This double door basket can be used for a variety of materials including but not

limited to tools, pipe, construction supplies, scrap and bulk waste products.

Specifications:

Designed, tested, constructed, inspected with offshore identification markings to DNV

2.7-1, API RP 2A Sec. 2.4.2 C&D, SEPco Document OPS 0055, IMO 860, EN 12079

Third-party certification on design, testing, construction and inspection

Design Temperature is -20C

Built in tie down rings for efficiently securing a load

Stackable with Sling Connected

Easy lock devise on door assembly

Internal Dimensions:

Length: 3,561 mm [140″][11’8’]

Width: 1,082 mm [42″][3’6″]

Height: 924 mm [36″][3’]

External Dimensions:

Length: 3,904 mm [153.5″][12’9.5″]

Width: 1,296 mm [51″][4’3″]

Height: 1,118 mm [44″][3’-8″]

Max gross weight: 18,800 lbs. [8,528 KG]

Est. Tare Weight: 3,990 lbs. [1,810 KG]

Pay Load Weight: 14,810 lbs. [6,718 KG]


January 2015

6’ x 12’ Half Height

Built to DNV 2.7-1



Payload 6,220 kgs

Outside dimensions: 12’ long x 6.5’ wide x 4’ high


January 2015

4’ x 21’ DNV 2.7-1 Basket

Common Uses

Safe, secure transportation and storage of tubular casing, pipe, hoses, down hole assembles and

rods or any long in length items. Engineered to handle the long items during all-weather

offshore operations.

Specifications:





Hot Dipped Galvanized



Length: 6,040 mm [238″][19’10″]Width: 940 mm [37″][3’1″]

Height: 807 mm [30″][2’6″]


Length: 6,300 mm [248″][20’8″]

Width: 1,200 mm [48″][4’]

Height: 1,100 mm [43″][3’7″]

Max Gross Weight: 21,060 lbs. [9,550 KG]




January 2015

4’ x 27’ Cargo Basket

Built to DNV 2.7-1

Max gross mass: 12,250 Kg

Tare Mass: 2,250 Kg

Payload: 10,002 Kg

4-punched lift eyes tested to 21/2 times MGW

Walls are solid with expanded metal

Solid plate steel floor

Outside dimensions: 3' 11" wide x 27' 2” long x 3’7 high

Inside dimensions: 3' 3" wide x 26' 7" long x 3' high


Built to DNV 2.7-1

Tare Mass: 2,600 Kg


Payload: 10,000 Kg


Solid steel plate floor

Outside dimensions: 3’ 11” wide x 33’9” long x 3’7” high


January 2015


Built to DNV 2.7-1

Tare Mass: 3,000 Kg


Payload: 10,000 Kg

Outside dimensions: 39’ long x 3.9’ wide x 3.6’ high


• Built to DNV 2.7-1

• Tare weight: 3,000 Kg.

• Max gross weight: 13,000 Kg.

• Payload: 10,000 Kg.

• Outside dimensions:4’wide x 40’ long x 3’6” high

• Inside dimensions:3’2”wide x 38’3” long x 2’6” high


MGW: 15,930 Kg

Tare: 3,930 Kg

Payload: 12,000 Kg

Outside dimensions: 47’L x 3.9’W x 3.9’H


January 2015

15.85 M (52’) DNV 2.7-1 Basket


Length: 15,610 mm [612″][51’]

Width: 960 mm [37″][3’1″]

Height: 842 mm [33″][2’9″]


Length: 15,850 mm [624″][52’]

Width: 1,200 mm [48″][4’]

Height: 1,200 mm [48″][4’]

Max Gross Weight: 35,384 LBS [16,250

KG]


Pay Load Weight: 26,455 lbs. [12,000KG]


Built to DNV 2.7-1



Payload 12,000 kgs

Outside dimensions:

60’ long x 4’ wide x 4’ high


January 2015

4’ x 76’ DNV 2.7-1 Basket

Specifications








Length: 23,060 mm [908″][75’8″]

Width: 960 mm [38″][3’2″]

Height: 815 mm [32″][2’8″]


Length: 23,300 mm [917″][76’5″]

Width: 1,200 mm [48″][4’]

Height: 1,200 mm [48″][4’]

Max Gross Weight: 41,670 LBS [18,900 KGS]

Est. Tare Weight: 15,180 lbs. [6,900 KGS]

Pay Load Weight: 26,460 lbs. [12,000 KGS]


January 2015

24’ Offshore Lifting Frame

Built to DNV 2.7-1

Tare Mass: 6,000 Kg


Payload: 16,680 Kg

Outside dimensions: 24’ length x 12’ width x 5’ height

27’ Oversize Lifting Frame

Built to DNV 2.7-1

Tare Mass: 7,300 Kg


Payload: 22,700 Kg

Outside dimensions: 27’ 3” length x 10’ 9” width x 11’ 7” height


January 2015

DNV 2.7-1 5’x9’ Basket with Side Door

Common Uses

The DNV 2.7-1 5’x9’ Basket with Side Door is an all-purpose transporter that features a side

door for loading and unloading.

Specifications






Built in tie down rings for

efficiently securing a load


Length: 2,436 mm [96″][8’]

Width: 1,220 mm [48″][4’]

Height: 1,220 mm [48″][4’]


January 2015

10’ Open Top Containers

Built to DNV 2.7-1



Payload 7,950 kgs

Outside dimensions: 10’ long x 8’ wide x 8’6” high

Built to DNV 2.7-1 / EN12079 Standards


January 2015

20’ Open Top Containers

Built to DNV 2.7-1



Payload 14,500 kgs

Outside dimensions: 20’ long x 8’ wide x 8’6”

high


January 2015

8’x5’ DNV 2.7-1 Short Container

Common Uses

General purpose dry storage container perfect for transportation and storage of groceries, office

and production supplies, electronic and communication equipment, as well as general palletized

materials.

Specifications

Designed, tested, constructed, inspected with offshore identification markings to

EN12079-1:2006/DNV2.7-1: 2006 in support of IMO 860 /SEPCo OPS0055/ API RP

Sec.2.4.2c&d



Built in tie down rings for efficiently

securing a load


Length: 2,235 mm [88″][7’4″]

Width: 1,626 mm [64″][5’4″]

Height: 1,245 mm [49″][4’1″]


Length: 2,438 mm [96″][8’]

Width: 1,829 mm [72″][6’]

Height: 1,626 mm [64″][5’4″]





January 2015

8'X10' DNV Cargo Container

• Tare Weight - 2,115 kg

• Max Payload - 8,000 kg

• Max gross weight -10,115 kg

• External dimensions – 10’ long x 8’ wide x 8’5”

high


January 2015

8'X 20' DNV Cargo Container

• Tare Weight – 3,900 kg

• Max Payload - 14,100 kg

• Max gross weight -18,000

kg

• External dimensions

– 19.9’ long x 8’ wide x 8’5” high

DNV Offshore Mini Container:

TYPE A

Built to DNV 2.7-1

MGW 5,550 kg,

Tare 1,550 kg,

Payload 4,000 kg

Dimensions: (5” 6” x 6’ 4” x 8’ 8”)

TYPE B

Built to DNV 2.7-1

Tare Weight 4, 630 lbs

Max Payload 17, 637 lbs

Max gross weight 22, 267 lbs

External dimensions: 8’ long x 5’3” wide x 8’6”

high


January 2015

550 Gallon Stainless Steel Tote Tank With DNV Carrier:

Tote Tank:

Tare weight: 290 Kg

Max gross weight: 2,721 Kg

Payload: 2,431 Kg

1-2” ball valve drain w/male camlock and cap

Vented hatch and fusible vent

Top mounted drum cover

Fork liftable form three sides

All stainless steel construction

4 x 4 footprint

Dimensions: 4.6’ L x 4.1’ W x 6.25’ H

Tote Tank Carrier:

Dimensions: 4.9’ L x 3.8’ W x 7.67’ H

Tare weight: 580 Kg

Max gross weight 5,000 Kg

SWL: 4,420 Kg


January 2015

Hazardous Waste Skip

• Built to DNV 2.7-1

• Tare weight: 2,970 kg

• Max gross weight: 9,750 kg

• Payload: 6,600 kg

• Outside dimensions: 6’8” long x 6’10” wide x 7’3”high

Boat Skip

Built to DNV 2.7-1

Tare weight: 3,527lb (1,600 kg)

Max gross weight: 16, 534 (7,500 kg)

Payload: 13,007 lb (5,900 kg)

Volume: 6.5 cubic yards

Outside dimensions: 12’4” long x 6’ wide

x 5’1”high

Tool Box/ Waste Skip

Built to DNV 2.7-1



Hot Dipped Galvanized (H.D.G.)

Dimensions :

( Internal)

- Length: 1,300 mm (4.3 feet)

- Width: 1,300 mm (4.3 feet)

- Height: 1,003 mm (3.3 feet)

( External)

- Length: 1,504 mm (4.9 feet)

- Width: 1,504 mm (4.9 feet)

- Height: 1275 mm (4.2 feet)

Max gross weight: 8,800 LBS (4,000 KG)

Est. Tare Weight: 2,123 LBS (965 KG)

Max Pay Load: 6,677 LBS (3,035 KG)


January 2015

DNV 2.7-1 Waste Skip / Tool Box 2M

Common Uses

Closed Top Waste Skip / Tool Box can be used for sealed

transportation and storage of waste, tools, tool parts or any

supplies that may require being transported to and from

offshore platforms, rigs and vessels to a shore base.

Specifications

Designed, tested, constructed, inspected with

offshore identification markings to DNV2.7-1

EN12079-I / IMO 860 / SEPCo OPS00551 / API

RP 2A



Internal Cubic Capacity: 2.3M3



Length: 1,800 mm [71″][5’11″]

Width: 1,300 mm [51″] [4’3″]

Height: 965 mm [37″][3’1″]


Length: 2,000 mm [79″] [6’7″]

Width: 1,500 mm [59″][4’11″]

Height: 1,275 mm [50″][4’2″]


Est. Tare weight: 2,535 lbs. [1,150 KG]



January 2015

DNV 2.7-1 Closed Top Waste Skip

Common Uses:

Designed for drill cuttings but may be used for any sludge or solid waste per local regulations.

Specifications

Designed, tested, constructed, inspected with offshore

identification markings to DNV 2.7-

1, API RP 2A Sec. 2.4.2 C&D,

SEPco

Document OPS 0055, IMO 860, EN

12079

Third Party certification on design,

testing, construction

and inspection

Built-in nylon ratchet straps

Built in tie down rings

Design Temperature: -20° C


Lid Dimensions


Length: 2,900 mm [114″][9’6″]

Width: 1,820 mm [71″][5’11″]

Height: 1,785 mm [70″][5’10″]

Front Entry Lid:

Width: 610 mm[24″][2’]

Length: 1,448 mm [57″][4’9″]

Second Lid:

Width: 1,143 mm

[45″][3’9″]

Length: 1,448 mm

[57″][4’9″]

Last Back Lid:

Width: 1,041 mm

[41″][3’5″]

Length: 1,448 mm [57″][4’9″]

Max Gross Weight: 16,535 LBS [7,500 KG]

Est. Tare Weight: 4,497 LBS [2,040 KG]

Pay Load Weight: 12,037 LBS [5,460 KG]


January 2015

22 BBL Cuttings Boxes

• Designed, tested, constructed, inspected with offshore identification markings to DNV2.7-1

EN12079-I / IMO 860 / SEPCo OPS00551 / API RP 2A Sec.2.4.2c&d IMDG

• Max Gross Weight: 22,046 LBS [10,000 KG]

• Est. Tare Weight: 3,968 lbs [1,800 KG]

• Pay Load Weight: 18,078 lbs [8,200 KG]

• Inside Volume Capacity: 22 bbls [925

Gallons]

• Inside Cubic Capacity: 3.5 CU. M

• Design Temperature: -20° C

• Each Unit Has Two 6” Ports

• Hot Dipped Galvanized

• Inside dimensions: 80” wide x 69” deep x

39” high

• Outside dimensions: 90” wide x 77” deep x 49” high


January 2015

25 BBL DNV CUTTINGS BOX

Common Uses

Designed for transportation and storage of drill cuttings but may be used for liquids or solids

that meet the criteria for US DOT 49 CFR 176.340 for combustible liquids.

SPECIFICATIONS

• Constructed in accordance with US D.O.T. 49 CFR 176.340 for combustible liquids

. Exterior high strength frame with interior compartment tank. Meets Charpy Impact

requirements for cold weather service (design temp. -20°C, -4°F).

. Designed, tested, constructed, inspected with offshore identification markings to DNV2.7-1

EN12079-I / IMO 860 / SEPCo OPS00551 / API RP 2A Sec.2.4.2c&d IMDG

. Third Party certification on design,

testing, construction and inspection

• Hinged and gasketed lids secured with

flange nuts and swing bolts

• 3/8 inch plate floor, walls and top

• Top lift eyes with stacking pads

• Four way fork pockets

• Hot dip galvanized coating on all surfaces

• Sling angle 45 degrees

• Container design pressure 10 PSI

• Product tested at 3 PSI or PSIG Internal

with Air

• Pressure relief vent

• Max Gross Weight: 30,000 LBS. [13,608

KG]

• Est. Tare Weight: 5,400 LBS. [2,449 KG]

• Pay Load Weight: 24,600 LBS. [11,158 KG]

• Product density 23.4 LBS./GAL. (specific gravity of 2.8)

External Dimensions -Length: 2,134 mm [84”][7’]

- Width: 2,438 mm [96”][8’]

- Height to Top Lift Eye: 1,321 mm

[52”][4’4”]


- Length: 1,905 mm [75”][6’3”]

-Width: 2,108 mm [83”][6’11”]

- Height: 762 mm [30”][2’6”]


January 2015

DNV Industrial Gas Bottle Racks

Built to DNV 2.7-1

MGW 2,670 kg ,

Tare 670 kg

Payload 2,000 kg

Dimensions: (4’ x 4’ x 7’)

Built to DNV 2.7-1

Tare weight 850 kgs


Payload 2,000 kgs

Outside dimensions:

4.5’ long x 3.7’ wide x 7.7’ high


January 2015

3,055 Litre Horizontal Heli-Fuel Tank DNV 2.7-1

SPECIFICATIONS

• Designed, tested, constructed, inspected with offshore identification markings to DNV

2.7-1, API RP 2A Sec. 2.4.2 C&D, SEPco Document OPS 0055, IMO 860, EN 12079, T4

• Third Party certification on design, testing, construction and inspection.

• Vessel 316L Stainless Steel

• Equipped with retractable fall protection

anchorage

• Grounding studs on tank and grounding plates

on skid for static elimination during fueling

operations.

• Separate sampling valve

• Removable drip pan

•Anti-slip ladder installed

• Gauging stick on tank to verify fluid level

• Closed-loop vapor recovery system

• Test Pressure 4 BAR - 58 PSI

• Tank Design Temperature: -40C

• Working Pressure: 2.7 BAR - 38.7 PSI

• Fork liftable from two sides

• External Dimensions:

Length: 2,120 mm [84”][7’]

Width: 1,700 mm [67”][5’7”]

Height: 2,331 mm [92”][7’8”]

• Maximum Gross Weight:

12,125 lbs. [5,500 KG]

• Pay Load Weight:

8,047 lbs [3,650 KG]

• Est. Tare Weight

4,078 lbs. [1,850 KG]

• 3,055 Liters - 807 Gallons

Common Uses:

Used for the storage and transport of Jet A1 fuel for the purpose of on-site helicopter refueling.


January 2015

47.5 BBL 2.7-1 Stainless Steel Tank

SPECIFICATIONS

• Designed, tested, constructed, inspected with offshore identification markings to DNV

2.7-1, API RP2A Sec. 2.4.2 C&D, SEPco Document OPS 0055, IMO 860, EN 12079, US

DOT

• ASME VIII-1 [NCS] / T11 UN Portable Tank /

IMDG - RID/ADR


• Equipped with separate valve for drawing

sample of tank contents

• Level gauge included to monitor fluid levels

• Capable of venting air at ground level by

way of contol handle

• Test Pressure: 6 BAR - 87 PSI

• Working Pressure: 4 BAR - 58 PSI

• Third-party certification on design, testing,

construction and inspection

• Frame Design Temperature is -20C

• Tank Design Temperature is -40C

• ISO Corner Blocks - 8’ x 10’ with CSC Safety

Approval Plate

• One 3” Discharge valve

• Built in ladder and walk way

• Equipped with a retractable fall protection anchorage rod

• 20” Top Hatch

• Three-way closure discharge valve

• Four-Point Lfting Eyes


• 47.5 BBL = 2,000 Gallons = 7,600 Liters

• Frame Dimensions -

Length: 2,991 mm [118”][9’10”]

Width: 2,438 mm [96”][8’]

Height: 2,591 mm [102”][8’6”]

• Max gross weight: 33,069 lbs. [15,000 KG]

• Est. Tare Weight: 5,511 lbs. [2,500 KG]

• Pay Load Weight: 27,558 lbs. [12,500 KG]

Common Uses: Secure transportation and storage of drilling, production and completion fluids

as well as fuels and other similar liquids compatible with 316L stainless steel.


January 2015

125 BBL DNV 2.7-1 Stainless Steel Tank

SPECIFICATIONS

• Designed, tested, constructed, inspected with offshore identification markings to DNV 2.7-

1, API RP2A Sec. 2.4.2 C&D, SEPco Document OPS 0055, IMO 860, EN 12079-1,

US/DOT & UK DFT

• ASME VIII-1 [NCS] / T11 UN Portable Tank / IMDG - RID/ADR

• ISO - 1493-3:1995 with CSC Safety Approval Plate for 8’x20’ Container


• Test Pressure: 6 BAR - 87 PSI

• Working Pressure: 4 BAR - 58 PSI

• Third-party certification on design, testing, construction and inspection

• ISO Corner Blocks - 8’ x 20’

• 125.78 BBL = 5,283 = 20,000 Liters

• Frame Design Temperature is -20C

• Tank Design Temperature is -40C

• 20” Hatch

• One 4” Discharge valve

• Built in ladder and walk way

• Two retractable fall protection anchorage

rods


• Three-way discharge closure valve

• Equipped with separate valve for drawing sample of

tank contents

• Level gauge included to monitor fluid levels

• Capable of venting air at ground level by way of control handle

• Frame Dimensions -

Length: 6,058 mm [238”][19’10”]

Width: 2,438 mm [96”][8’]

Height: 2,591 mm [102”][8’6”]

• 4-Point Lifting Eyes


Weights for EN 12079-1 / IMO 860 /

SEPco OPS50055 / APR RP 2A / CSC / ISO 1493




Weights for DNV 2.7-1 [max limit of spec]




Common Uses: Secure transportation and storage of drilling, production and completion fluids

as well as fuels and other similar liquids compatible with stainless steel.


January 2015

550 Gallon Acid Tank Package

Common Uses

The 550 Gallon Acid Tank (poly IBC) is built for safely moving hazardous fluids offshore. The

tank is designed for corrosives, acids and solvents that are compatible with polyethylene. This

is a dependable and versatile package for the Offshore E&P Industry.

Specifications

UN/D.O.T. certified (UN31H2/HM-181E)

1/2″ rotationally molded polyethylene

6.5″ GEM Cap

Molded in gallonage marker for easy

monitoring

Structural rib design for added strength

2″ valve with two serial mounted closures

Pay Load Weight (Tank): 5,600 lbs.

[2,540 KG]

Frame:



Est. Payload Weight: 6,390 lbs. [2,898 KG]


January 2015

25 BBL SS Low Profile DNV Vertical Tank

Common Uses

The 25 Barrel Stainless Steel Low Profile DNV 2.7-1 Vertical Tank is built for safely moving

hazardous fluids offshore. It is designed for drilling, completion, production, P&A and work

over fluids that are compatible with 316 stainless steel. This package is dependable and

versatile for the Offshore E&P Industry.

Specifications

Designed for offshore dynamic lifting in accordance with the provisions of DNV 2.7-1,

EN 12079, API RP 2A and SEPco document OPS0055

Tank Inner Diameter: Ø 2,000 mm = 78.75″

Manhole Diameter: Ø 500 mm = 19.69″

Nominal Capacity: 4,000 L = 1,056 gal. = 25.16

bbls.

Design Pressure: 2.67 bar = 38.7 PSI

Test Pressure: 4.0 bar = 58 PSI

Tank Material: Stainless Steel 316

Seal Gasket: FKM (A chemically resistant

fluorinated rubber.)

Finish: 3 Part Poly Exterior Coating

Third-party Approval: DNV2.7-1 IMDG

Design Code: DNV2.7-1 IMDG, ASME VIII

Div. 1

Dimensions:

Length: 2,268 mm [89″][7’5″]

Width: 2,268 mm [89″][7’5″]

Height: 2,500 mm [98″][8’2″]





January 2015

8’X20’ DNV 2.7-1 Reefer Unit

Common Uses

Portable cold storage of frozen and refrigerated foods and other perishable items.

Specifications-

Electrical

Designed, tested, constructed, inspected with

offshore identification markings to EN12079-

1:2006/DNV2.7-1: 2006 in support of IMO

860, SEPCo OPS0055/ API RP Sec.2.4.2c&d

Third-party certification on design, testing,

construction and inspection

Built in tie down rings for efficiently securing a

load

380/460V, 3-phase, 50/60 Hz

18 meter (60 ft) 11/4 power cable Equipment Features

Fresh air exchange adjustable from 0-285 m³/hr (0-150 ft³/min)

Non-corrosive sea-going construction – (Aluminum, Stainless Steel, etc.)

Show More

Demand defrost and supplemental timed defrost with selectable intervals

Cool, Modulation Cool, Null, Heat, Defrost, In-Range and alarm indicator lights

Time delay start sequence

ABS certification

USDA “Cold Treatment” provision

Dehumidification on control


Length: 5,450 mm [215″][17’9″]

Width: 2,294 mm [90″][7’5″]

Height: 2,166 mm [85″][7’1″]


Length: 6,058 mm [240″][20’]

Width: 2,438 mm [96″][8’]

Height: 2,591 mm [102″][8’6″]

Max Gross Weight:

[Offshore Container]: 20,000 KG [44,090 LBS]

[ISO Container]: 30,480 KG [67,200 LBS]

Est. Tare Weight:

[Excluding Reefer]: 4,870 KG [10,740 LBS]

[Including Reefer]: 5,270 KG [11,620 LBS]

Pay Load Weight:

[Offshore Container]: 14,730 KG [32,470 LBS]

[ISO Container]: 25,210 KG [55,580 LBS]


January 2015

8’X20’ DNV 2.7-1 Reefer Unit - Continued

Microprocessor Controlled Temperature

Precise temperature control from -35°C to +30°C. (-31°F-86°F)

Any box temperature (-35°C (-31°F) and above)

In any ambient temperature even 50°C (122°F)

Less complexity/higher reliability

Data logging (adjustable time points) review-able on unit or by download

Digital status readout window and keypad controller

PTI programs, manual test, self-diagnostic test, advanced service information and

service help functions


January 2015

4.0 Cargo Carrying Equipment (CCEs) : (BS 12079 Certified)

Industrial Gas Bottle Rack

Common uses: security of, and multiple, separate packaging of oxygen, acetylene, and nitrogen

bottles and other similar products while in storage or transportation during offshore operations.

Tare weight: 2,600 lbs

Max gross weight: 5,200 lbs

Fold down security door on both sides

Fork liftable from two sides


2 sides to separate cargo

2-3” 3M ratchet straps to secure cargo

One side accepts bottles up to 12” wide; other

side accepts bottles up to 10” wide

All 661/2” high

Completely galvanized

Dimensions: 4’ 8” wide x 60” long x 64”

high

SST Transport Unit

Common uses are for security of single and multiple (compatible) packaging of pre-packaged

medium to large items during storage or transportation while reducing safety hazards during

offshore operations.

Tare weight 2.480 lbs

Max gross weight 10,000 lbs

Inside dimensions: 64” wide x 64” deep x 48” high

Door opening: 64” wide


All hinges with grease serts

Stackable

Outside dimensions: 72” wide x 72” deep x 57-1/2” high


January 2015

4'X8' Cargo Basket

Tare weight 1,500 lbs.

Max gross weight 11,500 lbs.


Fork liftable from two sides


Outside dimensions: 50" wide x 8' long x 44 1/2" high

Inside dimensions: 42-1/2" wide x 89-1/2" long x 36"

high

Solid Floor with Drains

6'6"X 16' Cargo Basket

Common Uses: Engineered extra heavy duty to take the rigors of offshore daily

operations.

Tare weight 5,320 lbs

Max gross weight: 30,000 lbs.


Heavy duty expanded metal walls and ends

Solid steel plate floor


Outside dimensions: 6' 6" wide x 16' long x 3'

8" high

Inside dimensions: 5' 10" wide x 15' 4" long x 3'

high


January 2015

8'X24' Cargo Basket

Tare weight 9,000 lbs

Max gross weight 40,000 lbs

4-punched lift eyes tested to 21/2 times

MGW

Walls are solid with expanded metal

Solid plate steel floor


Outside dimensions: 8' 6" wide x 24' long x 45" high

Inside dimensions: 7' 3" wide x 23' 2" long x 3' high


• Tare weight: 11,000 lbs.

• Max gross weight: 20,000 lbs.

• Solid steel plate floor

• Completely galvanized

• Outside dimensions:4’wide x 52’ long x 4’ high


January 2015

6'X6'X6' Pallet Container

For shipping palletized materials, supplies, dry storage items, computers, cardboard boxes,

drums, caustics and shore based or rig based dry storage.

Some common uses are for storage and transportation of single or multiple items that require

protection from the elements for cargo and reducing the total number of crane lifts associated

with offshore operations.

Tare weight 3,500 LBS

Max gross weight 7,000 LBS


Inside free space :65” wide x 62” deep x 60” high

Door opening: 64” wide x 60” high

Water resistant reefer style doors and locks

Stackable

6-heavy duty hinges with grease serts


Double Tall Pallet Box

Some common uses are for storage and transportation of single or multiple items that

require element resistance while providing protection of cargo reducing the total number

of crane lifts associated with offshore operations.

Tare weight 4,500 LBS.

Max gross weight 15,000 LBS.

Heavy duty 1/4" steel construction

3" thick insulation around sides, door and roof


Full open reefer style door

4 heavy duty hinges with grease zerts

Outside dimensions: 10' 6' x 5'-6" x 5'-6"

Inside dimensions: 10'3"x 5'-3" x 5'-3"


January 2015

5.0 Cuttings Boxes and Fluid Transport Tanks Descriptions

25 BBL Cuttings Boxes

Container constructed to meet DOT/Coast Guard regulation 49 CFR 176.340 for

combustible liquids, with 1/2" plate floor and top, 3/8” walls and lids, 2 hinged and

gasketed lids secured with flange nuts and swing bolts, bottom lifts eyes, top lift eyes

with stacking pads, pressure relief vent set at 5 PSI.

Tare weight 5.360 LBS

Max gross weight 30,000 LBS

Lid opening :72” wide x 22” deep

Test pressure: 15 PSI

Design pressure :10 PSI

Product density 23.4 LBS./GAL (specific gravity 2.8)

Aluminium vacuum lids available



January 2015

25 BBL IM 101 Transport Tanks

Tank constructed to meet all applicable requirements of the ASME Boiler & Pressure Vessel

Code, Section VIII, Division 1 and CFR 49, Section 270 & 271. Tank Configuration Code T8.

Tank constructed with 3/8", SA-36 PL cylinder, and 3/8" SA-516, GR 70 PL heads. Pressure and

vacuum relief vent flow rate of 4208 cubic feet of free air per minute as required by CFR 49,

178.270-11. Top manway and all other top nozzles meet all ASME requirements. Nozzles and

valves meet the requirements of CFR 49, 178.270-12.

Exterior Coatings, Zinc rich epoxy primer, polyurethane top

coat

Interior Coatings, high-build epoxy lining system

Tank test pressure 39 psi

Tank maximum working pressure 26 psi

Tank maximum temperature 200°F

Tank Gross Weight 30,000 lbs.

Tank Tare Weight 5220 lb.

Tank Volume 25 BBL. 1052 Gal.

Tank Dimensions, Base 72" x 96", Height 84


January 2015

6.0 Storage Tanks Descriptions

205 bbl L-Skid Stationary Storage Tank

Put these versatile stationary tanks to work in either the vertical or horizontal position. There are

three (3) 4-inch male camlocks with caps in the vertical position and two (2) 4-inch male

camlocks in the horizontal position. 21-inch manway. Epoxy lined for easy fast clean out. Forks

lift slots and lifting eyes for easy handling.

Empty weight 12,000 lbs

Vertical dimensions: 8’ 6” wide x 10’ 3” long x 18’ 5” tall

Horizontal dimensions: 8’ 6” wide x 18’ 5” long x 10’ 3” tall

8” pressure release vent / chemical resistant liner


January 2015

500 bbl Frac Tank

The 500 bbl Corrugated Wall, Liquid Storage Tank come equipped with new running gear, 10

mil DFT chemical resistant liners.

Floor: 1/4” PL, V-Bottom with integral formed side channels

Floor Support: 10" channel longitudinal runners with 8" channel and formed 1/4” PL

channel cross-members

Walls: 1/4” PL solid welded, corrugated steel, corrugations 15" on center

Roof: Flat top, 1/4” PL solid welded with channel supports outside

Front/Rear: 1/4” PL solid welded, corrugated steel, 10" radius at vertical outside corners

Drain/Fill: 4" floor drain at rear end, 3" fill pipe to roof at rear, 4" suction line

connection at front, 4" mid high connection at front, 8" flanged front manifold

connection with turn down to floor sump

Manway: 21" manway on front, side, (3) non-sealed hatches on roof

Pick Up: Standard 5th wheel king pin

Welds: All welds continuous except substructure cross-members

Axle: 25,000 lb. axle with air brakes, 11.00 x 22.5 bias tires on steel disc wheels

Access: Front stairway

Hydrotesting: Full capacity static test

Dimensions: 45’ long, 8’-6" wide, 10’ high; 500 barrel capacity

Tank pressure/ vacuum relief vent

Level gauging


January 2015

7.0 Pumps, Pressure Washers and Steam Cleaners

(a) 2" & 3” Versamatic Air Diaphragm Pump

Air operated M15 Pump comes complete with 25 ft. of suction

hose, 25 ft. of discharge hose and 50 ft. of air hose at NO

ADDITIONAL COST.

(b) 250 Series Centrifugal Pump Specifications

The concentric housing is 35% thicker for extra strength and

extended service life and reduces the radial load of the bearings.

Open-vaned impeller is designed to reduce turbulence, eliminate

recirculation, lower radial and thrust load, and provide a smooth

flow of fluids.

The larger diameter shaft gives heavy-duty performance with minimum shaft deflection. Heavy-

duty outboard bearing assembly consists of a pair of angular contact bearings with high thrust

load rating and zero end play. The heavy-duty inboard bearing is a double row ball-bearing with

high radial load rating to compensate for the larger size impeller and heavy-duty applications.

The oil bath lubrication system is designed with a larger oil reservoir, which provides free

circulation of oil and better heat dissipation for longer bearing life.

6"X8" Centrifugal Pump- with

100 HP Motor/ 3-71 Diesel

Engine with 5x6 Centrifugal

Pump

6"X5" Centrifugal Pump-with

75 HP Motor


January 2015

3.5 K & 5 K Elec. Explosion Proof Pressure Washer Hot/Cold

3,500 PSI (4 gpm), 5,000 PSI (5 gpm)

Offshore ready

4 gallons per minute

Stainless steel cage

480 volt, 100 amp

Up to 170 degree heat

Dimensions: 39" l x 57" w x 50" h

Shipping weight: 1,557 lbs.


January 2015

Suitable for the transport of

hazardous waste products and

built according to

the design rules for vacuum

operated waste tankers

8.0 Steel Vacuum Trailers

130 BBL

Capacity: 5460 gallons, plus 2%

Design Pressure: 15 psi internal, 22 in hg

external, 23 psig hydrostatic test

Shell: 1/4 pl x 60 in od.

60 BBL

Pressure-Vacuum Tank Shape Cylindrical shaped tank

Material Stainless steel

Volume 9500 L (2509.634 gal)

Design Pressure Full vacuum

Working pressure －0.9bar

Vacuum Pump Type Liquid ring vacuum pump

Air flow 1350 m³/hr (790 cfm)

Max Vacuum 90％


January 2015

9.0 TTTU Dry Vacuum Unit

Sound Attenuated

2000 CFM Liquid Ring Stainless

Steel Vacuum Pump

Easy Operation

27” Hg Vacuum

Emergency Shut-Downs

Low Maintenance

User Friendly Control Panel

Skid Tare Weight 9,500 lbs.

TTTU vacuum systems are distinguished by their compact footprint, mobility and

industrial strength. The 2000 Series system is diesel powered and mounted on a skid

package.

TTTU’s vacuum systems use industry standard size motors and pumps, yet an innovative

filtration system affords industrial power compressed into a fraction of the system

footprint - Powerful and Compact!

This new innovation has also made the process safer and the operation easier, bringing it

into the customer environment and removing the necessity for licensed third party

intervention.

Safety was an important factor in the design of the new system. TTTU systems eliminate

personnel exposure and reduce operator risk due to the lesser CFM rate.

The TTTU high performance vacuum system can be utilized where restricted space is

available for maneuvering of industrial vacuum tankers. Triton's portable high

performance vacuum systems reduce operations costs and reduce the timeframes of

downtime operations where vacuum services are required.

APPLICATIONS

intense cleaning power and a lot more-fume removal,

liquid spill pickup,

hazardous and recyclable goods collection,

bulk material conveying


January 2015

10.0 Tank Cleaning/ Confined Space Entry Works

Tank cleaning by its very nature, is an operation that poses serious risks to human health.

This is due oftentimes attributed to the type of vessel to be cleaned, the nature of the

material previously stored in the vessel and the methodology employed.

Risks to human health include suffocation, poisoning, sprained or fractured body parts,

dehydration / heat stroke and fires and explosions. Tiger Tanks employs a methodology

that mitigates against all of the above impacts.

Prior to even embarking on a job, TTTU ensures that all the requisite equipment checks

are performed to minimize accidents due to equipment failure. In addition, we ensure

that all our personnel receive the appropriate health and safety training and understand

the safe operating procedures governing the execution of the job.

TTTU provides the requisite emergency response and safety equipment based on the

nature of the job. Manning this equipment is the TTTU On-site Safety Officer.

The methodology used by Tiger Tanks for the removal of liquids and sludge, involves the

use of pressurized water to remove any solids or semi solids from the walls and floor of

the tank. Then, using a 100 HP wet vacuum system; the material is removed and

transferred via hoses to an appropriate storage unit (e.g. vacuum tank, cuttings box).


January 2015

The use of the hoses minimizes the likelihood of spills from the operation. In the event

of any spills, TTTU has the capability to provide twenty four (24) hour Oil Spill Response

Services to the energy industry. In the instance where the material to be removed is dry

solid, a dry vacuum system is used.

The TTTU methodology is less labor-intensive than simply using a bucket and shovels

and does not employ the use of hazardous chemicals. The operation is always closely

monitored by a TTTU Supervisor.

As a result of health and safety concerns as well as regulatory obligations, as stated in the

OSH Act 2004 (Amendment 2006) and industry best practices for confined space entry,

outlined in OSHA 1910.146 Subpart J, it has become necessary for the deployment of a

certified Rescue Team during tank cleaning operations. This includes provision of the

following:

1. Two (2) – person confined space standby rescue team

2. Confined space rescue kit, which includes the primary access line, a belay/

retrieval system and gear for the rescue team. The kit contains a rescue pulley for

a 4:1 lowering and raising system the SKED Tripod for the overhead anchor point.

11.0 Cooling Tower Cleaning/ Dewatering

The emergence of the Petro Chemical industry and the associated cooling towers has spawned

the need for cooling tower cleaning and maintenance.

The current practice is to pump out the free water, after which the concentrated sludge/slurry is

removed/transferred using vacuum tankers into to storage boxes for transport to the designated

disposal site.

This process is slow and tedious and requires that the cooling tower be pumped out and shut

down to facilitate the operation.

While Tiger Tanks Trinidad Unlimited maintains a comprehensive stock of the equipment and

the in house technical and support staff to execute such projects, we are in the process of

procuring the necessary equipment to execute In situ cooling tower cleaning, i.e. during the

normal operation of the cooling towers.

The process encompasses the use of vacuum tankers, pumps, storage tanks, dewatering tanks (see

below) and polishing filters.

The basic concept of the operation is to extricate the sludge from the bottom of the basin. The

sludge will then be fed into a vacuum assisted dewatering tank consisting of a stainless steel

retainer support screen topped with filter fabric with the desired opening size (< 100 microns).

All particles greater than 100 microns would be retained in the dewatering tank while the filtrate

from this process would be pumped through a polishing (< 60 microns) before re-entering the

cooling tower basin.


January 2015

Dewatering Units – Vacuum Box with Filter Basket

FLOOR: 1/4” PLone piece

CROSSMEMBER: 3 x 4.1 channel 12" on center

WALLS/ROOF: 1/4” PL solid welded, inside liner hooks

STRUCTURE: Tubing and formed channel supports rated to operated at 30" hg

DOOR: 1/4” PL with tubing frame

FRONT: 1/4” PL with push plates

PICK UP: Standard cable with 2” x 6” x 1/4” rails, gusset at each crossmember

WHEELS: (4) 10” DIA x 9” long with grease fittings

DOOR LATCH: (4) independent ratchet binders with chains, vertical second latch

GASKETS: Extruded rubber seal with metal retainers

WELDS:All welds continuous except sub structure crossmembers

FINISH: Coated inside and out with direct to metal, rust inhibiting acrylic enamel color

coat

HYDROTESTING: Full capacity static test

DIMENSIONS: 22'-11" long (21'-8" inside), 94" wide (83" inside)


January 2015

Dewatering Units – Heavy Duty Open Top Container with Filter Basket

FLOOR: 3/16” PL one piece

CROSSMEMBER: 3 x 4.1 channel 16" on center

WALLS: 3/16” PL solid welded with tubing top, inside liner hooks

DOOR: 3/16” PL with tubing frame

FRONT: 3/16” PL slant formed

PICK UP: Standard cable with 2” x 6” x 1/4” rails, gusset at each crossmember

WHEELS: (4) 10” DIA x 9 long with grease fittings

DOOR LATCH: (3) Independent ratchet binders with chains, vertical second latch

GASKETS: Extruded rubber seal with metal retainers

WELDS: All welds continuous except substructure crossmembers

FINISH: Coated inside and out with direct to metal, rust inhibiting acrylic enamel color

coat

HYDROTESTING: Full capacity static test

DIMENSIONS: 22'-11" long (21'-8" inside), 99" wide (88" inside), see drawing for

height


January 2015

12.0 8’x16’ ECOmats

Common Uses:Temporary road, parking area, dock side support heli pad or other hard

surfacing needs.

Specifications:

• 2,850 Lbs.

• UV Inhibitors

• Galvanized 3 Channel Runners

• Mats are lighter than oak-Increased freight savings

• Not labor intensive - no bolting to layer & attach

• Loads, off loads, lays and moves easily with a fork truck or D rings for easy lifting.

• 3 ply • 8’ x 16’, (128 sq. ft. coverage)

• No nails - all bolted

• Fire Spread Rating

• Anti-Static Inhibitors

• Proprietary Traction Grain Pattern

• NO liquid absorption - easily washed


January 2015

13.0 Waste Management

Background

TTTU on tank cleaning and other similar projects is normally the lead contractor and as such is

responsible for the management (temporary storage, waste transfer and disposal) of generated

wastes and other residual material.

Historically, we utilized local disposal facilities for waste disposal. However, oftentimes this

proved to be a challenge based on site limitations to receiving waste generated from our tank

cleaning activities. In this regard, in 2011 we investigated the BAT (Best Available Technology)

for the cost effective treatment and disposal of sludge and tank bottoms recovered from cleaning

operations and acquired three thermal units:

One Direct Fired Thermal Desorption Unit (TDU) and

Two Infrared Thermal Evaporation units; this system has a patented system for the

recovery of oil.

Our operation is governed by a CEC granted by the EMA. The units are fully commissioned and

have been operational for 1-year.

Each waste stream generated must be analytically profiled prior to acceptance to confirm the

anticipated disposal method and ensure that the disposal criteria are met. If elevated heavy metal

concentrations are found in the waste stream an alternative method must be determined (for e.g.

for solids, stabilization in a cement matrix followed by land-filling). Baseline analytical testing

(full suite of parameters) will be performed on each waste stream. During the project lifetime,

once the waste streams do not change, random routine analytical testing (selected parameters

only) will be conducted for confirmatory purposes.

Once the waste has been successfully remediated and / or treated (as determined by analytical

testing) an “End of Life” Certificate will be issued for your waste management records. This

Certificate will document such information as:

Waste Generator

Waste Source

Date Received

Date Completed

Volume and Type of Waste Received

Initial Analytical Profile

Final Analytical Profile


January 2015

Direct Fired Thermal Desorption Unit (DTDU)

The DTDU’s primary soil treatment system consists of three component sub-systems which are:

the soil feed system, dryer/Soil Cleaning Unit (rotary drum), and the pugmill which is the treated

material cooling/re-moisturization/discharge system. System is illustrated below.


January 2015

Mobile Units – Thermal Evaporation Systems

VIR


January 2015


January 2015

13.1 Waste Type Capabilities:

TTTU’s Waste Type Capabilities stretch far beyond hazardous and non-hazardous waste from

the Petro Chemical industry and Energy sector. We also cover non-energy sectors for waste

disposal. Some of TTTU’s Waste Type Capabilities are as follows:

WASTE CATEGORIES

HAZARDOUS NON- HAZARDOUS

Waste Chemicals Galley Waste

Paint Residue General Refuse

Paint Thinners Packaging Material

Aerosol Cans Wooden Pallets

Cleaning Solvents Empty Drums (triple rinsed)

Batteries Cooking Oils

Acids Glass

Bases Scrap Metals

Waxes Paper

Waste Grease Cardboard

Asbestos Based Waste

Fluorescent Bulbs

Contaminated Waste Oil

Medical Waste

Empty Drums with Residual

Chemical

Glycol

Gas Hydrate Chemicals

Oily Sludge (tank bottoms)

Radioactive Isotopes

Synthetic Based Mud

Barite

Cement

TTTU is concerned with Waste Source Reduction, Recycling and Reusing, Treatment and

Disposal when it comes to our Waste Management Capabilities. Our capabilities further involve

Waste Segregation, Waste Remediation (thermal), Waste Destruction (incineration), Landfilling

and Specialized Disposal.


January 2015

14.0 Oil Spill Response

The PRIMARY tools used to respond to oil spills are mechanical containment, recovery, and

cleanup equipment. Such equipment includes a variety of booms, barriers, and skimmers, as

well as natural and synthetic sorbent materials.

A key to effectively combating spilled oil is careful selection and proper use of the equipment

and materials most suited to the type of oil and the conditions at the spill site. Most spill response

equipment and materials are greatly affected by such factors as conditions at sea, water currents,

and wind. Damage to spill-contaminated shorelines and dangers to other threatened areas can be

reduced by timely and proper use of containment and recovery equipment.


January 2015

Tiger Tanks Trinidad Unlimited has a stock of oil spill response equipment available for

deployment 24-hours a day, 7-days a week. Listed below is current stock equipment.

Sorbent Boom 5" x 10'

Sorbent Pads

Sorbent Socks

Spill Kits

Peat Moss

Containment Boom

Rope Mop Skimmer

Pressure Washers

PPE

Disposal Bags

Spark Resistant Tools

Pumps

Vacuum Systems

Tank Wagons

Handheld Gas Monitors

Temporary Storage


January 2015

15.0 Safety Equipment Sales & Rental

Services

Confined Space Rescue Teams

Contingency Plans

Gas Detection and Other Safety Equipment (includes calibration)

Safety Products Sales & Rentals

H2S Safety Equipment Packages

Self Contained Breathing Apparatus (5-min, 30-min, 4-hr)

Cascade Systems

Breathing Air Compressors

Fixed and Portable Gas Detection Systems (including wireless gas detection)

Calibration Gas

Fall Protection and Rescue Systems

Explosion Proof Lighting

Vent Ignitor Systems

Intrinsically Safe Portable Communication

Sorbent Pads, Booms and Rolls

Personal Protection Equipment

o Fall Lanyards with shock

o Full Body Harness

o Lifelines

o Self Retracting Lifelines

o Spider Beam Clamps

Rescue Boxes (blower, light stand, lock out kit, tripod stand, 100 ft. lifeline rope,

first aid kit, potable eyewash station, harness and lanyard, air hose (25, 50 & 100

ft.) and manifold).


January 2015

16.0 Blast Resistant Buildings

5.0PSI “SUPER MOBILE” BLAST RESISTANT BUILDING

QUICK FACTS

• 5.0 PSI

• 40’x8’

• 3rd party review of all designs

• 3rd party quality inspections

• Non permit required load

• Available for Sale or Lease

STANDARD SPECS

• 5.0 PSI – 150 msec -Medium

Response

• WxLxH = 8’x 40’x 8’6”

• Weight – 20,000 lbs

• (4) Lifting lugs

• (2) HVAC – Redundant units, non-classified electrical

• Insulated

• (1) 240 V, 100 A, single phase, non-classified electrical

• (2) Blast rated doors

• (2) Blast rated windows

• Easy access wall penetrations

• (6) 4’ long dual bulb fluorescent lights

• (6) duplex electrical outlets

• (2) Data ports

• (2) Phone ports

• Interior wall covering - plywood

• Heavy industrial wood floor

• Exterior paint - Direct to metal, rust inhibiting, high solids urethane (steel grit blast prep)

RENTAL FLEET OPTIONS

• Tool/material racks and cabinets

• Split floor design with private office

• Electronic upgrade options

- H2S alarm system

- LEL alarm system

- Alarm Control Panel

- Wireless/radio signal amplifier

Additional Custom Unit Options (Purchase)

• Toilets facilities

• Break room with kitchen area

• Locker rooms

• Decon/ Shower units


January 2015

8.0PSI MODULAR BUILT BLAST RESISTANT BUILDING

QUICK FACTS

• 8.0 PSI

• 40’x12’

• 3rd party review of all designs

• 3rd party quality inspections

• Stackable

• Available for Sale or Lease

STANDARD SPECS

• 8.0 PSI – 200 msec Medium Response

• WxLxH = 12’x40’x10’6”

• (4) Lifting lugs

• (1) HVAC – Class I Div II, Central Air

• Insulated

• 240 V, 100 A, single phase, Class I Div

II external electrical connection

• (2) Blast rated doors

• (2) Blast rated windows

• Central Alarm Panel

• Easy access wall penetrations

• (1) Smoke detector located in supply air

duct with alarm panel

• (1) Smoke detectors located in interior of building

• (8) 4’ long dual bulb fluorescent lights

• (11) duplex electrical outlets

• (10) Data ports

• (10) Phone ports

• Interior wall covering - Aluminized textured sheet rock

• Heavy industrial rubberized tile floors

• Exterior paint - Direct to metal, rust inhibiting, high solids urethane (steel grit blast prep)

• Data/Phone connection system – 25 pair with fuses,110 punch panel & CAT 5 patch panel.

• Easy access plumbing and sewage ports

RENTAL FLEET OPTIONS

• Floor plans

- Meeting room floor plan

- (2) office with wash room

• Electronic upgrade options

- H2S alarm system

- LEL alarm system

- Wireless signal amplifier

-

Additional Custom Unit Options (Purchase)

• Multi unit complexes

• Positive pressure interiors


January 2015

Many other equipment types are available, including potable water tanks, 50 bbl open top tanks

with a hydraulic blending unit, ISO tanks, offshore vacuums for platform oil spills etc.

All of our equipment and services provided can be viewed at our website

www.tigertankstrinidad.com or at www.modernusa.com

We thank you for having afforded us the privilege of satisfying your needs in the areas identified,

and do hope that we are favorably considered to provide our specialized services to your

organization. Should you have any questions or require any further information of the matters

contained herein, please do not hesitate to contact the undersigned.

Yours Respectfully,

Tiger Tanks Trinidad Unlimited

Navin Persad

Assistant General Manager

http://www.tigertankstrinidad.com/

http://www.modernusa.com/

january 12, 2003 - tiger tanks...

Documents