jlv industries pty ltd.pdf
TRANSCRIPT
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 1/38
JLV Industries Pty Ltd
“Conveying Quality”
Glideseal Idler Roller
Product Catalogue
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 2/381
Introduction 2
Company Background 4
Quality Policy 5
Conveyor Data Sheet 6
Idler Design Data Sheet 7
General Application Guide 10
Idler Roller Specications 13
Idler Roller Tolerances 14
Recommended Idler Spacing 15
Material Properties 16
Idler Roller Dimensional Charts 22
CONTENTS
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 3/382
INTRODUCTION
JLV Industries is proud of the innovative developments of the Glideseal idler roller. The Glideseal
roller directly addresses the inherent problems associated with conventional idler rollers, and in doing
so provides an environmental, personnel, and equipment friendly roller with low noise emissions,
ease of handling, and low vibration, coupled with an extremely long service life.
The Glideseal idler roller is designed for conveying applications where long life, low noise emission and
low vibration are paramount. 127mm Dia,152mm Dia and 178mm Dia rollers can be manufactured
to suit client specications. Glideseal rollers are continually developed to suit the exact requirements
of each client to obtain the most suitable roller possible.
FeaturesLong bearing life using premium quality bearing, multiple integral sealing and synthetic►
lubricants.
Polymeric end bearing housings highly resistant to degradation from stress and weathering.►
Maintenance free operation.►
Low noise and vibration emissions.►
When an aluminium shell is selected, extremely low noise emissions, low rotational mass►
reducing power draw, very low handling weight and excellent corrosion resistance are
achieved.
PerformanceGlideseal rollers are also manufactured in an extra low weight version, which is predominantly used
for long trough and return idler rollers. With this technology, single roll return rollers that normally
weigh 50 kg can now be manufactured with a mass of no more than 21 kg. This is achieved by
using our hollow shaft design. These are being mainly used on stacker / reclaimers and ship-loading
facilities where accessibility is restricted and personnel need a light product to prevent injury.
Low noise Glideseal rollers have on average a 10 dBA lower noise emission than conventional
conveyor rollers. They have been designed to operate with reduced noise and vibration emission,
which makes them suitable for application where proximity to populated buildings and areas is a
concern.
The Glideseal roller can be considered a long life roller that outlasts conventional idler rollers in
harsh environments. Glideseal rollers are currently installed in ship-loader facilities around Australia
and are performing well. Several of our clients use our rollers to transport corrosive material and
enjoy lengthier change-out frequencies than they would otherwise experience.
The JLV Glideseal idler roller has been site tested for more than fteen years with great success and
during that time signicant enhancements have been made to further improve sealing efciencies
and ultimate roller life. We believe our rollers are the correct choice for operations interested in
reducing the total cost of ownership (TCO) through extended service life and reduced change-outschedules.
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 4/383
What’s The Dif ference?The polymeric end housing incorporates multiple integral seals which prevent bearing contamination
caused by particle migration ensuring an extremely long service life. Also it reduces the transfer of
vibration from the shell to the bearings and on to the plant and equipment. The polymeric materials
used are very stable and no ill effects through stress or weathering will occur and any form of
corrosion is simply not possible. The weather seal provides effective protection keeping moisture
and particles away from the inner seals and ensure that even under deluge conditions moisture
can not enter the protective cavities. The bearings and protective cavities are lled with synthetic
grease, which is not susceptible to oil separation and will not leach ensuring that the bearings will
be well lubricated for the life of the roller. The TIR (Total Indicator Runout) and MIS (Maximumindicated Slope) are extremely low due to the stringent specication with which Glideseal idlers are
manufactured.
Glideseal Idler Roller Cut Away
INTRODUCTION
Polymeric End Housing
Sealing Cavities Filled
With Synthetic GreaseSealing Labyrinth
Bearing Filled With
Synthetic Grease &
Sealed For Life
ShaftShell
Weather Seal
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 5/38
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 6/385
QUALITY POLICY
JLV Industries Pty Ltd is involved in the design manufacture and supply of a range of rubber and
urethane products for the mining, materials handling and rening industries. It is our objective to
become the supplier of rst preference for our range of products and services, by providing our
clients an optimum level of quality, service and price. In order to achieve this objective we have
implemented a quality system based upon AS/NZS ISO 9001: 2008.
Our Quality System ensures that all activities are performed in a systematic and controlled manner
and in an environment conducive to a philosophy of continued improvement and excellence. All
employees are aware of our Quality System and appreciate and endorse the Quality Policy and
Objectives of our Company. All work is performed to pre-determined standards in order to satisfy
our clients’ requirements.
It is recognised that our employees are of vital importance for our future growth and protability and
for this reason we regard employees’ health, safety, job satisfaction, and personal achievement as
of the utmost importance. Stringent standards of excellence and performance are practical within
the Company, with our suppliers, and with our customers.
……………………………………………….
Bill JohnsonManaging Director
JLV INDUSTRIES PTY LTD
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 7/38
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 8/387
IDLER DESIGN DATA SHEET
Current - Standard Roller
Dimension Trough Return
A
B
C
D
E
F
G
Shell Material
Bearing Size
JLV Idler Roller Code
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 9/388
IDLER DESIGN DATA SHEET
Current - Two Roll Suspended Set
Dimension Trough Return
A
B
C
D
E
F
G (Dia)
Shell Material
Bearing Size
Chain Link Size & Number of Links
Hanger Bracket DetailsJLV Idler Roller Code
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 10/389
IDLER DESIGN DATA SHEET
Current - Three Roll Suspended Set
Dimension Trough Return
A
B
C
D
E
F
G
H
I
J (Dia)
Shell Material
Bearing Size Center: Wing:
Chain Link Size & Number of Links
Hanger Bracket Details
JLV Idler Roller Code
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 11/3810
GENERAL
APPLICATION GUIDE
Three Roll TroughLight, medium and heavy duty up to 45 degree
trough angle, offset or inline.
Three Roll Trough Rigid
SuspendedLight, medium and heavy duty up to 45 degree
rigid suspended trough angle.
Weigher idlersBelt weighers or load cells require rollers which
are accurate in cross sectional prole, concentric
and balanced. Inline type only.
Suspended Three Roll Trough &
Impact IdlersHeavy duty having the ability to absorb high impact
and deect impact energy, Are self centring and
eliminate build up of material on structure.
Adjustable Transition IdlersUsed at head and tail position to maintain belt
edge contact.
Trough Training IdlersFor belt training using a swivel design frame.
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 12/3811
GENERAL
APPLICATION GUIDE
Return Training IdlersFor return belt training using a swivel design
frame.
Flat Carrying Plain Idlers
Light, medium and heavy duty. Used in dry andclean installations.
V Return IdlersLight, medium and heavy duty. 5 degree or 10
degree return angle.
3 Roll & 6 Roll Drop Down IdlersRollers can be easily changed over in an impact
area. The frame can be readily lowered for access
purposes using a standard jack to enable roller
replacement.
Retractable Idlers
Allows rollers to be changed under loading skirtsareas without removing adjacent idlers.
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 13/3812
Trough and Return side guide
rollersUseful for belt tracking.
WindguardsManufactured from galvanized heavy gauge
steel. Rigid construction, Slotted mounting holes
for easy attachment, Rolled safety edge, Fluted
for added strength, Supplied complete with
mounting holes.
GENERAL
APPLICATION GUIDE
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 14/3813
IDLER ROLLER
SPECIFICATIONS
Type Roller
Diameter
(mm)
Shell
Thickness
(mm)
Shaft Dia.
At
Bearing
(mm)
Min. Shaft
Dia,
Between
Bearing
(mm)
Bearing
Type
Bearing
Dynamic
Capacity
(N)
AO235327 127 3.25 25 27 6305 22 500
AO235333 127 3.25 25 33 6305 22 500
AO535527 152 5.00 25 27 6305 22 500
AO535533 152 5.00 25 33 6305 22 500
AO536533 152 5.00 30 33 6306 28 100
AO536536 152 5.00 30 36 6306 28 100
AO537538 152 5.00 35 38 6307 33 200
AO537542 152 5.00 35 42 6307 33 200
AO538542 152 5.00 40 42 6308 41 000
AO539548 152 5.00 45 48 6309 52 700
AO739548 178 5.00 45 48 6309 52 700
SO235327 127 3.25 25 27 6305 22 500
SO235333 127 3.25 25 33 6305 22 500
SO535427 152 4.00 25 27 6305 22 500
SO535433 152 4.00 25 33 6305 22 500
SO536433 152 4.00 30 33 6306 28 100
SO536436 152 4.00 30 36 6306 28 100
SO537438 152 4.00 35 38 6307 33 200
SO537442 152 4.00 35 42 6307 33 200
SO538442 152 4.00 40 42 6308 41 000
SO739548 178 4.80 45 48 6309 52 700
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 15/3814
IDLER ROLLER
TOLERANCES
TOTAL INDICATOR RUNOUT (T.I.R)
Rollers up to 1040mm long
Weigh rollers 0.13 mm
Plain rollers 0.40 mm
Rollers over 1040mm long
Weigh rollers 0.13 mm
Plain rollers 0.60 mm
BALANCE
Maximum out of balance weigh rollers 0.014 Nm
Maximum out of balance standard rollers 0.056 Nm
DEFLECTION
Maximum angular deection at bearing under full load 10 minutes
FABRICATION TOLERANCES
Roller face length: +/- 1.5 mm
Nominal O.D aluminium shell: +/- 0.2 mm
Nominal O.D. steel shell: +/- 0.3 mm
Centre roller height above base line: +/- 2.0 mm
Transverse hole centres: +/- 2.0 mm
Longitudinal hole centres: +/- 2.0 mm
Return bracket drop height: +/- 2.0 mm
Trough angle: +/- 1 deg.
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 16/3815
RECOMMENDED
IDLER SPACING
Material density – kilograms per cubic metre
Belt width
(mm) 480 800 1200 1600 2000 2400
300-400 1.7 1.7 1.5 - - -
450-500 1.7 1.7 1.5 1.5 - -
600 1.7 1.7 1.5 1.5 1.4 1.0
650 1.5 1.5 1.4 1.4 1.3 1.0
750 1.5 1.5 1.4 1.4 1.3 1.0
800 1.5 1.5 1.4 1.4 1.2 1.0
900 1.5 1.5 1.4 1.4 1.2 1.0
1000 1.5 1.4 1.2 1.2 1.0 1.0
1050 1.5 1.4 1.2 1.2 1.0 0.9
1200 1.5 1.4 1.0 1.0 0.9 0.8
1350 1.4 1.2 0.9 0.9 0.8 0.8
1400 1.2 1.2 0.9 0.9 0.8 0.8
1500 1.2 1.2 0.9 0.9 0.8 0.8
1600 1.2 1.2 0.8 0.8 0.8 0.6
1700 1.2 1.2 0.8 0.8 0.8 0.6
1800 1.2 1.2 0.8 0.8 0.8 0.6
2000 1.2 1.2 0.8 0.8 0.8 0.6
2200 1.2 1.2 0.8 0.8 0.8 0.6
2400 1.2 1.2 0.8 0.8 0.8 0.6
2500 1.2 1.2 0.8 0.8 0.8 0.6
Note: Spacing is in metres.
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 17/3816
MATERIAL PROPERTIES
Abrasiveness NA – Non Abrasive MA – Mildly Abrasive VA – Very AbrasiveCorrosiveness NC – Non Corrosive MC – Mildly Corrosive VC – Very Corrosive
Material Mass Kg/m3 Surcharge
Angle
Angle
of
Repose
Max
Conveyor
Slope
A b r a s i v e n e s s
C o r r o s i v e n e s s
Alumina 800-1040 10° 22° 12° VA NC
Aluminium Chips 110-240 30° 45° 27° MA NC
Aluminium Sulphate 864 20° 32° 17° NA NC
Aluminium Oxide 1120-1920 15° 29° 15° VA NC
Aluminium Silicate 784 5° 30-44° 10° VA NC
Ammonium Chloride 832 10° 30-44° 10° NA VC
Ammonium Nitrate 720 25° 30-44° 23° MA VC
Ammonium Sulphate 720-930 10° 32° 10° MA VC
Asbestos Ore or Rock 1296 20° 30-44° 18° VA NC
Asbestos, Shred 320-400 30° 45° 30° MA NC
Ashes, Coal, Dry to 75mm 560-640 25° 40° 23° MA NC
Ashes, Fly 640-720 30° 42° 23° VA NC
Asphalt, Binder for Paving 1280-1360 30° 45° 30° NA NC
Barytes 2280 20° 30-44° 15° NA NC
Bauxite, Mine Run 1280-1440 20° 31° 17° VA NC
Bauxite, Crushed to 75mm 1200-1360 20° 30-44° 20° VA NCBauxite, Ground Dried 1090 20° 20-29° 18° VA NC
Bentonite, Crude 540-640 20° 42-44° 20° MA NC
Bentonite, 100 Mesh 800-960 20° 42° 20° MA NC
Bicarbonate of Soda 656 20° 32° 17° NA VC
Borax, Lumps 960-1040 20° 30-44° 20° MA NC
Brick, Hard 2000 30° 42° 27° VA NC
Brick, Soft 1600 30° 42° 27° VA NC
Carbon Black, Powder 60-110 10° 30-44° 12° NA NC
Cast Iron Chips 2080-3200 30° 45° 27° MA NC
Cement, Portland 1504 25° 30-44° 20° MA NC
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 18/3817
Material Mass Kg/m3 Surcharge
Angle
Angle
of
Repose
Max
Conveyor
Slope
A b r a s i v e n e s s
C o r r o s i v e n e s s
Cement, Portland, Loose 960-1200 20° 39° 15° MA NC
Cement Clinker 1200-1520 25° 30-40° 18° VA NC
Chalk, Lumps 1200-1360 10° 45° 15° NA NC
Chalk, 100 Mesh 1040-1200 25° 45° 28° NA NC
Charcoal 290-400 25° 35° 22° NA NC
Clay, Dry, Fines 1600-1920 20° 35° 22° VA NC
Clay, Dry, Lumps 960-1200 20° 35° 20° VA NC
Coal, Anthracite 960 20° 27° 18° MA NC
Coal, Bituminous, 100 Mesh 800-860 25° 45° 20° NA MC
Coal, Bituminous, 12mm 690-800 25° 40° 22° NA MC
Iron Chips 2000 30° 30° 15° MA NC
Iron Ore 1600-3200 20° 35° 20° VA NC
Iron Ore, Crushed 2160-2400 20° 30° 20° VA NC
Iron Oxide, Pigment 400 30° 40° 23° VA NC
Iron Pellets 2100-2800 10° 35° 14° VA NC
Kaolin, up to 75mm Lumps 1008 20° 35° 15° NA NC
Kaolin, 100 Mesh 670-900 30° 45° 23° NA NC
Lactose 512 10° 30-44° 14° NA MC
Lead Arsenate 1152 25° 45° 20° NA MC
Lead Ores 3200-4320 10° 30° 15° MA NC
Lead Oxides 960-2400 25° 45° 20° NA MC
Lime, Ground to 3mm 960 30° 43° 23° NA NC
Lime Hydrated 510-640 25° 42° 22° NA NC
Limestone, Agricultural, 3mm 1088 10° 30-44° 20° MA NC
Limestone, Crushed 1360-1440 25° 35° 18° MA NC
Magnesium Chloride 528 25° 40° 23° MA MC
Magnesium Sulphates 1120 20° 30-44° 15° MA MC
Magnesium Dioxide 1280 20° 30-44° 15° MA NC
MATERIAL PROPERTIES
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 19/3818
Material Mass Kg/m3 Surcharge
Angle
Angle
of
Repose
Max
Conveyor
Slope
A b r a s i v e n e s s
C o r r o s i v e n e s s
Manganese Ore 2000-2240 25° 39° 20° MA NC
Manganese Sulphate 1120 10° 30-44° 15° VA NC
Marble Crushed to 12mm 1440-1520 10° 30-44° 15° MA NC
Molybdenite, Powdered 1712 20° 40° 25° NA NC
Nickel Ore 2400 35° 30-44° 20° VA MC
Paper, Pulp 640-960 5° 19° 7° NA VC
Peanuts – in Shell 560 10° 30-44° 8° NA NC
Peas, Raw Dry 720-800 5° 19° 8° NA NC
Phosphate, Rock 1200-1360 10° 30-40° 12-15° MA NC
Phosphate, Super, Ground 816 30° 45° 30° MA MC
Potash Salts 1280 10° 20-29° 15° NA MC
Potassium Carbonate 816 10° 20-29° 15° MA MC
Potassium Chloride, Pellets 1920-2080 15° 30-44° 18° MA NC
Potassium Nitrate 1216 10° 20-29° 15° MA MC
Potassium Sulphate 670-770 30° 45° 30° MA MC
Pyrites – Iron 50 to 75 2160-2320 20° 20-29° 17° MA MC
Pyrites – Pellets 1920-2080 10° 30-44° 15° MA MC
Quartz 38 to 75mm 1360-1520 25° 35° 20° VA NC
Coal, Bituminous ROM 720-880 25° 38° 18° NA MC
Coal, Lignite 640-720 25° 38° 22° NA MC
Coke, Loose 370-560 30° 30-44° 18° VA MC
Coke, Petroleum, Calcined 560-720 20° 30-44° 20° NA NC
Coke Breeze, 6mm 400-800 25° 30-44° 20° NA MC
Compost 480-800 25° 30-44° 20° NA MC
Concrete, Blocks 2080-2400 - - - VA NC
Concrete, Slag 1140-1760 20° 30° 17° VA NC
Concrete, Wet 1760-2400 5° 10° 10° VA MC
Copper, Ore 1920-2400 25° 30-44° 20° VA MC
MATERIAL PROPERTIES
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 20/38
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 21/3820
Material Mass Kg/m3 Surcharge
Angle
Angle
of
Repose
Max
Conveyor
Slope
A b r a s i v e n e s s
C o r r o s i v e n e s s
Rock, Soft, Excavated 1600-1760 20° 30-44° 22° MA NC
Rubber, Pelletized 800-880 20° 35° 22° NA NC
Rubber, Reclaimed 400-480 20° 32° 18° NA NC
Salt, Dry, Course 640-880 20° 35° 20° MA NC
Salt, Dry, Fine 1120-1280 5° 25° 11° MA MC
Sand, Siliceous, Dry 200 10° 20-29° 12° VA NC
Sand, Littoral, Damp 1760-2080 25° 45° 22° VA NC
Sand, Littoral, Dry 1440-1760 20° 35° 18° VA NC
Sand, Foundry, Prepared 1440-1600 30° 30-44° 24° VA NC
Sand, Foundry, shakeout 1440-1600 25° 39° 22° VA NC
Sandstone, Chips 1360-1440 20° 30-44° 20° VA NC
Sawdust 160-210 5° 36° 22° NA NC
Sewage (Sludge) 640-800 10° 20-29° 15° NA NC
Shale, Broken 1440-1600 10° 20-29° 18° MA NC
Shale, Crushed 1360-1440 25° 39° 22° MA NC
Slag, Blast Furnace, Crushed 1280-1440 10° 25° 10° VA NC
Soap Powder 320-400 5° 20° 8° NA NC
Soda ASM 880-1040 25° 32° 19° MA NC
Sugar, Powdered 800-960 10° 30-44° 15° NA MC
Sugar, Raw, Cane 880-1040 20° 45° 22° MA MC
Sugar, Wet, Beet 880-1040 20° 30° 22° MA MC
Sugar Cane, Knifed 240-290 30° 45° 25° MA MC
Sugar Beet, Pulp (Dry) 190-240 30° 35° 25° MA NC
Sugar Beet, Pulp (Wet) 400-720 30° 35° 25° NA MC
Sulphur, Crushed < 12mm 800-960 15° 30-44° 20° NA VC
Sulphur, up to 75mm 1280-1360 15° 30-44° 18° NA VC
Talc, 12mm Screenings 1280-1440 10° 20-29° 15° NA NC
Talc, Powder 800-960 10° 20° 12° NA NC
MATERIAL PROPERTIES
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 22/3821
Material Mass Kg/m3 Surcharge
Angle
Angle
of
Repose
Max
Conveyor
Slope
A b r a s i v e n e s s
C o r r o s i v e n e s s
Wheat 720-770 10° 28° 12 NA NC
Wood Chips 160-480 30° 45° 27° NA NC
Zinc Concentrates 1200-1280 5° 25° 8° MA NC
Zinc Ore Crushed 2560 20° 38° 22° MA NC
Zinc Oxide, Heavy 480-560 10° 45-55° 12° NA NC
Zinc Oxide, Light 160-240 10° 45° 12° NA NC
MATERIAL PROPERTIES
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 23/3822
IDLER ROLLER
DIMENSIONAL CHARTS
SERIES _ _2353_ _ROLLER DIA. 127
BEARING 6305
BEARING RATING 2100 kg
SLOT ACROSS FLATS 14.3 A/F
3 ROLL INLINE TROUGH IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F ANGLE
SIZE
SHAFT
DIA.
400 154 650 140 204 50 27
450 172 700 140 204 50 27
500 189 750 140 204 50 27
600 224 850 140 204 50 27
650 244 900 140 204 50 27
750 278 1000 140 204 50 27
800 294 1050 150 214 65 27
900 331 1150 150 214 65 27
1000 358 1250 165 221 75 27
1050 383 1300 165 221 75 27
1200 436 1450 180 231 90 27
1350 488 1650 180 231 90 33
1400 494 1700 180 231 90 33
1500 541 1800 200 240 100 33
1600 561 2000 240 257 125 33
1800 625 2200 240 257 125 33
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 24/3823
SERIES _ _5355_ _ ROLLER DIA. 152
BEARING 6305
BEARING RATING 2100 kg
SLOT ACROSS FLATS 14.3 A/F
3 ROLL INLINE TROUGH IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F ANGLE
SIZE
SHAFT
DIA.
400 154 650 140 217 50 27
450 172 700 140 217 50 27
500 189 750 140 217 50 27
600 224 850 140 217 50 27
650 224 900 140 217 50 27
750 278 1000 140 217 50 27
800 294 1050 150 227 65 27
900 331 1150 150 227 65 27
1000 358 1250 165 233 75 27
1050 383 1300 165 233 75 27
1200 436 1450 180 244 90 27
1350 488 1650 180 244 90 33
1400 494 1700 180 244 90 33
1500 541 1800 200 252 100 33
1600 561 2000 240 270 125 33
1800 625 2200 240 270 125 33
IDLER ROLLER
DIMENSIONAL CHARTS
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 25/3824
IDLER ROLLER
DIMENSIONAL CHARTS
SERIES _ _5365_ _ ROLLER DIA. 152
BEARING 6306
BEARING RATING 2720 kg
SLOT ACROSS FLATS 22 A/F
3 ROLL INLINE TROUGH IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F ANGLESIZE
SHAFTDIA.
600 230 850 140 229 50 33
650 250 900 140 229 50 33
750 284 1000 140 229 50 33
800 300 1050 150 239 65 33
900 337 1150 150 239 65 33
1000 364 1250 165 245 75 331050 389 1300 165 245 75 33
1200 442 1450 180 256 90 33
1350 494 1650 180 256 90 33
1400 500 1700 200 264 100 33
1500 547 1800 200 264 100 36
1600 567 2000 240 282 125 36
1800 631 2200 240 282 125 36
2000 706 2400 280 303 150 36
2200 785 2600 280 303 150 36
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 26/3825
SERIES _ _5375_ _ ROLLER DIA. 152
BEARING 6307
BEARING RATING 3400 kg
SLOT ACROSS FLATS 22 A/F
3 ROLL INLINE TROUGH IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F ANGLESIZE
SHAFTDIA.
600 230 850 40 231 50 38
650 250 900 140 231 50 38
750 284 1000 140 231 50 38
800 300 1050 150 242 65 38
900 337 1150 150 242 65 38
1000 364 1250 165 248 75 381050 389 1300 165 248 75 38
1200 442 1450 180 259 90 38
1350 494 1650 180 259 90 38
1400 500 1700 200 267 100 38
1500 547 1800 200 267 100 38
1600 567 2000 240 285 125 38
1800 631 2200 240 285 125 38
2000 706 2400 280 305 150 38
2200 785 2600 280 305 150 42
IDLER ROLLER
DIMENSIONAL CHARTS
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 27/3826
IDLER ROLLER
DIMENSIONAL CHARTS
SERIES _ _5385_ _ ROLLER DIA. 152
BEARING 6308
BEARING RATING 4150 kg
SLOT ACROSS FLATS 22 A/F
3 ROLL INLINE TROUGH IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F ANGLE
SIZE
SHAFT
DIA.
600 230 850 140 234 50 42
650 250 900 140 234 50 42
750 284 1000 140 234 50 42
800 300 1050 150 244 65 42
900 337 1150 150 244 65 421000 364 1250 165 250 75 42
1050 389 1300 165 250 75 42
1200 442 1450 180 261 90 42
1350 494 1650 180 261 90 42
1400 500 1700 200 269 100 42
1500 547 1800 200 269 100 42
1600 567 2000 240 287 125 42
1800 631 2200 240 287 125 42
2000 706 2400 280 308 150 42
2200 785 2600 280 308 150 42
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 28/3827
SERIES _ _2353_ _ ROLLER DIA. 127
BEARING 6305
BEARING RATING 2100 kg
SLOT ACROSS FLATS 14.3 A/F
2 ROLL VEE RETURN IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B C ANGLE
SIZE
SHAFT
DIA.
600 341 850 56 65 27
650 363 900 56 65 27
750 417 1000 56 65 27
800 436 1050 56 65 27
900 488 1150 56 65 27
1000 541 1250 56 65 27
1050 561 1300 56 75 27
1200 646 1450 56 75 27
1350 745 1651 56 75 27
1400 765 1700 56 75 27
1500 815 1800 56 75 27
1600 915 2000 56 75 27
1800 1015 2200 56 90 27
2000 1115 2400 56 100 33
2200 1215 2600 56 125 33
2400 1315 2800 56 125 33
2500 1365 2900 56 125 33
IDLER ROLLER
DIMENSIONAL CHARTS
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 29/3828
IDLER ROLLER
DIMENSIONAL CHARTS
SERIES _ _5355_ _ ROLLER DIA. 152
BEARING 6305
BEARING RATING 2100 kg
SLOT ACROSS FLATS 14.3 A/F
2 ROLL VEE RETURN IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B C ANGLE
SIZE
SHAFT
DIA.
600 341 850 56 65 27
650 363 900 56 65 27
750 417 1000 56 65 27
800 436 1050 56 65 27
900 488 1150 56 65 27
1000 541 1250 56 65 27
1050 561 1300 56 75 27
1200 646 1450 56 75 27
1350 745 1650 56 75 27
1400 765 1700 56 75 27
1500 815 1800 56 75 27
1600 915 2000 56 75 27
1800 1015 2200 56 90 27
2000 1115 2400 56 100 33
2200 1215 2600 56 125 33
2400 1315 2800 56 125 33
2500 1365 2900 56 125 33
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 30/3829
SERIES _ _5365_ _ ROLLER DIA. 152
BEARING 6306
BEARING RATING 2720 kg
SLOT ACROSS FLATS 22 A/F
2 ROLL VEE RETURN IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B C ANGLE
SIZE
SHAFT
DIA.
600 347 850 56 65 33
650 369 900 56 65 33
750 423 1000 56 65 33
800 442 1050 56 65 33
900 494 1150 56 65 33
1000 547 1250 56 65 33
1050 567 1300 56 75 33
1200 652 1450 56 75 33
1350 751 1650 56 75 33
1400 771 1700 56 75 33
1500 821 1800 56 75 33
1600 921 2000 56 75 33
1800 1021 2200 56 90 33
2000 1121 2400 56 100 33
2200 1221 2600 56 125 33
2400 1321 2800 56 125 33
2500 1371 2900 56 125 33
IDLER ROLLER
DIMENSIONAL CHARTS
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 31/3830
IDLER ROLLER
DIMENSIONAL CHARTS
SERIES _ _5375_ _ ROLLER DIA. 152
BEARING 6307
BEARING RATING 3400 kg
SLOT ACROSS FLATS 22 A/F
2 ROLL VEE RETURN IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B C ANGLE
SIZE
SHAFT
DIA.
600 347 850 56 65 38
650 369 900 56 65 38
750 423 1000 56 65 38
800 442 1050 56 65 38
900 494 1150 56 65 38
1000 547 1250 56 65 38
1050 567 1300 56 75 38
1200 652 1450 56 75 38
1350 751 1650 56 75 38
1400 771 1700 56 75 38
1500 821 1800 56 75 38
1600 921 2000 56 75 38
1800 1021 2200 56 90 38
2000 1121 2400 56 100 38
2200 1221 2600 56 125 38
2400 1321 2800 56 125 38
2500 1371 2900 56 125 38
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 32/3831
SERIES _ _5385_ _ ROLLER DIA. 152
BEARING 6308
BEARING RATING 4150 kg
SLOT ACROSS FLATS 22 A/F
2 ROLL VEE RETURN IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B C ANGLE
SIZE
SHAFT
DIA.
600 347 850 56 65 42
650 369 900 56 65 42
750 423 1000 56 65 42
800 442 1050 56 65 42
900 494 1150 56 65 42
1000 547 1250 56 65 42
1050 567 1300 56 75 42
1200 652 1450 56 75 42
1350 751 1650 56 75 42
1400 771 1700 56 75 42
1500 821 1800 56 75 42
1600 921 2000 56 75 42
1800 1021 2200 56 90 42
2000 1121 2400 56 100 42
2200 1221 2600 56 125 42
2400 1321 2800 56 125 42
2500 1371 2900 56 125 42
IDLER ROLLER
DIMENSIONAL CHARTS
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 33/3832
IDLER ROLLER
DIMENSIONAL CHARTS
SERIES _ _2353_ _ ROLLER DIA. 127
BEARING 6305
BEARING RATING 2100 kg
SLOT ACROSS FLATS 14.3 A/F
FLAT RETURN & CARRY IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F G SHAFTDIA.
400 494 650 56 22 156 27
450 544 700 56 22 156 27
500 594 750 56 22 156 27
600 694 850 56 22 156 27
650 744 900 56 22 156 27
750 844 1000 56 22 156 27
800 894 1050 56 22 156 27
900 994 1150 56 22 156 33
1000 1094 1250 56 22 156 33
1050 1144 1300 56 22 156 33
1200 1294 1450 56 22 156 33
1350 1494 1650 56 22 156 33
1400 1544 1700 56 22 156 33
1500 1644 1800 56 22 156 331600 1844 2000 56 22 156 33
1800 2044 2200 56 22 156 33
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 34/3833
SERIES _ _5355_ _ ROLLER DIA. 152
BEARING 6305
BEARING RATING 2100 kg
SLOT ACROSS FLATS 14.3 A/F
FLAT RETURN & CARRY IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F G SHAFTDIA.
400 494 650 56 35 169 27
450 544 700 56 35 169 27
500 594 750 56 35 169 27
600 694 850 56 35 169 27
650 744 900 56 35 169 27
750 844 1000 56 35 169 27
800 894 1050 56 35 169 27
900 994 1150 56 35 169 33
1000 1094 1250 56 35 169 33
1050 1144 1300 56 35 169 33
1200 1294 1450 56 35 169 33
1350 1494 1650 56 35 169 33
1400 1544 1700 56 35 169 33
1500 1644 1800 56 35 169 331600 1844 2000 56 35 169 33
1800 2044 2200 56 35 169 33
IDLER ROLLER
DIMENSIONAL CHARTS
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 35/3834
IDLER ROLLER
DIMENSIONAL CHARTS
SERIES _ _5365_ _ ROLLER DIA. 152
BEARING 6306
BEARING RATING 2720 kg
SLOT ACROSS FLATS 22 A/F
FLAT RETURN & CARRY IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F G SHAFTDIA.
400 500 650 56 32 164 33
450 550 700 56 32 164 33
500 600 750 56 32 164 33
600 700 850 56 32 164 33
650 750 900 56 32 164 33
750 850 1000 56 32 164 33
800 900 1050 56 32 164 33
900 1000 1150 56 32 164 33
1000 1100 1250 56 32 164 33
1050 1150 1300 56 32 164 33
1200 1300 1450 56 32 164 33
1350 1500 1650 56 32 164 36
1400 1550 1700 56 32 164 36
1500 1650 1800 56 32 164 361600 1850 2000 56 32 164 36
1800 2050 2200 56 32 164 36
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 36/3835
SERIES _ _5375_ _ ROLLER DIA. 152
BEARING 6307
BEARING RATING 3400 kg
SLOT ACROSS FLATS 22 A/F
FLAT RETURN & CARRY IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F G SHAFTDIA.
600 700 850 56 35 167 38
650 750 900 56 35 167 38
750 850 1000 56 35 167 38
800 900 1050 56 35 167 38
900 1000 1150 56 35 167 38
1000 1100 1250 56 35 167 38
1050 1150 1300 56 35 167 38
1200 1300 1450 56 35 167 38
1350 1500 1650 56 35 167 38
1400 1550 1700 56 35 167 38
1500 1650 1800 56 35 167 38
1600 1850 2000 56 35 167 38
1800 2050 2200 56 35 167 42
2000 2250 2400 56 35 167 42
IDLER ROLLER
DIMENSIONAL CHARTS
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 37/3836
IDLER ROLLER
DIMENSIONAL CHARTS
SERIES _ _5385_ _ ROLLER DIA. 152
BEARING 6308
BEARING RATING 4150 kg
SLOT ACROSS FLATS 22 A/F
FLAT RETURN & CARRY IDLERS
IDLER DIMENSIONS mm
BELT WIDTH A B E F G SHAFT
DIA.
600 700 850 56 35 169 42
650 750 900 56 37 169 42
750 850 1000 56 37 169 42
800 900 1050 56 37 169 42
900 1000 1150 56 37 169 42
1000 1100 1250 56 37 169 42
1050 1150 1300 56 37 169 42
1200 1300 1450 56 37 169 42
1350 1500 1650 56 37 169 42
1400 1550 1700 56 37 169 42
1500 1650 1800 56 37 169 42
1600 1850 2000 56 37 169 42
1800 2050 2200 56 37 169 42
2000 2250 2400 56 37 169 42
8/10/2019 JLV Industries Pty Ltd.pdf
http://slidepdf.com/reader/full/jlv-industries-pty-ltdpdf 38/38
PO Box 343
Harvey
WA 6220
Australia
www.jlv.com.au
JLV Industries Pty Ltd
Harvey Factory
Cnr Turnbull & Morton Streets
Harvey
WA 6220
Postal Address