john deere catalog - sloan implement · 2019. 7. 30. · john deere catalog parts, equipment,...

John Deere CatalogParts, Equipment, Supplies, and More

Harvest 2019

12-MONTH WARRANTYon dealer-installed O.E.M. ag parts

See back cover for details.

2Page 11

Buy a 200 count bucket of Shop Towels (DRC4221) and get a 200 count bucket refill (DRC4222) for FREE! (A $12.25 value)Limit 2 per customer. Not valid with other offers.

Page 93

$17.45 Shop Towels $2.59

Dura-Twin Sections $17.99 600 Series Black Knife Guards

15% Off Genuine John Deere Coarse and Fine Tooth sickle sections. Engineered for maximum wear life and performance.

15% Off 4" standard black heat-treated knife guards for 600/700 Series Platforms.

6

Corn Head Parts

Features of Genuine John Deere Chains:■ The face of each flight is extended down to create a lip between sidebars—

this prevents debris from collecting at the roller and reduces wear on the chain and sprockets

■ The flight face slants at a 15-degree angle away from roller chains to create a self-cleaning effect as the flight moves ears towards the auger

■ Chains are coated with a rust-preventative chain lubricant

Gathering Chains

NUMBER DESCRIPTION TYPE LIST NOW

40 and 90 Series

AN102009 Black Pin Gathering Chain John Deere $ 54.96 $50.59

A-AN102009 Black Pin Gathering Chain A&I Products $ 37.90

600 Series (MY08-11) (-745100)

AH208978 Chrome Pin Gathering Chain John Deere $ 83.61 $76.89

A-AH208978 Chrome Pin Gathering Chain A&I Products $ 65.63

600 Series (MY12-17) (745100-)

AXE61091 Chrome Pin Gathering Chain John Deere $104.15 $95.79

A-AXE61091 Chrome Pin Gathering Chain A&I Products $ 77.92

Gathering chain sprockets need to be inspected and replaced as needed. It is a good practice to replace the sprockets when replacing the gathering chains. Corn heads have an upper drive sprocket and lower idler sprocket.

Gathering Chain Sprockets


40 Series

H85252 Upper Drive Sprocket John Deere $24.09 $22.19

A-H85252 Upper Drive Sprocket A&I Products $16.28

AN102448 Lower Idler Sprocket (-466449) John Deere $16.61 $15.29

AH101219 Lower Idler Sprocket (466450-) John Deere $18.48 $16.99

A-AH101219 Lower Idler Sprocket (466450-) A&I Products $13.95

90 Series



AH101219 Lower Idler Sprocket John Deere $18.48 $16.99

A-AH101219 Lower Idler Sprocket A&I Products $13.95

600 Series (MY08–11) (-745100)



AH231386 Lower Idler Sprocket John Deere $50.49 $46.49

A-AH231386 Lower Idler Sprocket A&I Products $45.11

600 Series (MY12–17) (745100-)

AXE36872 Upper Drive Sprocket John Deere $51.72 $47.59

A-AXE36872 Upper Drive Sprocket A&I Products $44.66

AXE63766 Lower Idler Sprocket John Deere $44.09 $40.59

A-AXE18770 Lower Idler Sprocket A&I Products $32.10

Trigger a chain reactionMake your corn head stronger—and last longer—with RowMax, a new retrofit solution from John Deere.

Designed exclusively for the 700C/FC corn heads and available as a retrofit for MY12-17 600C/FC corn heads, RowMax boosts row unit life by up to 50% with an advanced gathering chain featuring 12 additional links, two more sprocket teeth, and upgraded solid alloy bushings. In addition, if you replace your worn stalk rolls with opposed or intermeshing stalk rolls, you’ll get 25% more wear life thanks to an improved wear coating.

Cover more acres—and lower lifetime ownership cost—by upgrading your cornhead with an innovative, RowMax retrofit kit from John Deere.

JohnDeere.com/CombineParts 7

*Also order KXE10528 metal guide kit to complete installation.

NUMBER DESCRIPTION LIST NOW

KXE10487 RowMax Kit $468.48 $418.48

HXE110671 LH Opposed Stalk Roll $503.78 $453.78

HXE110672 RH Opposed Stalk Roll $503.78 $453.78

HXE110675 LH Intermeshing Stalk Roll $525.90 $475.90

HXE110676 RH Intermeshing Stalk Roll $525.90 $475.90

8

Stalk Rolls

Chopping Stalk Roll Blossom

John Deere’s innovative lineup of stalks rolls is now better than ever with the new CHOPPING STALK ROLLS. Featuring 10 intermeshing knives, these rolls size most residue 6 inches or less. Plus, they explode the top of the stalk for reduced tire and track wear and drop residue right on top of the row for improved planter performance in no-till or strip-till operations.

Along with the chopping stalk roll, John Deere offers other uniquely engineered solutions to meet the residue processing needs of your 600/700 SERIES CORN HEAD.

STRAIGHT FLUTED STALK ROLLS for slow residue breakdown

OPPOSED KNIFE ROLLS for moderate stalk processing

INTERMESHING KNIFE ROLLS for aggressive stalk processing

CHOPPING STALK ROLLS for highly aggressive stalk processing

Visit us to learn more about Stalk Roll Solutions.

1234

GIVE YOURSELF ACUTTING EDGE

Opposed Knife Rolls (for dry corn)

Intermeshing Knife Rolls (for moist corn)

Chopping Stalk Rolls


40 and 90 Series

H104091 LH Tapered Stalk Roll John Deere $ 167.61 $ 154.19

H104090 RH Tapered Stalk Roll John Deere $ 167.61 $ 154.19

H150139 LH Straight Fluted Stalk Roll John Deere $ 167.61 $ 154.19

H150138 RH Straight Fluted Stalk Roll John Deere $ 167.61 $ 154.19

AH227072 Knife Stalk Roll Kit John Deere $1,150.94 $1,058.89

600 Series – 606 (-740311), 608 (740473), 612 (-740749)

HXE11082 LH Straight Fluted Stalk Roll John Deere $ 437.34 $ 402.39

HXE11081 RH Straight Fluted Stalk Roll John Deere $ 437.34 $ 402.39

HXE11079 LH Opposed Knife Roll John Deere $ 480.00 $ 441.59

HXE11080 RH Opposed Knife Roll John Deere $ 480.00 $ 441.59

600/700 Series – 606 (740312-), 608 (740474-), 612 (740750-)

HXE41144 LH Straight Fluted Stalk Roll John Deere $ 472.16 $ 422.16

HXE41143 RH Straight Fluted Stalk Roll John Deere $ 472.16 $ 422.16

HXE110671 LH Opposed Stalk Roll John Deere $ 503.78 $ 453.78

HXE110672 RH Opposed Stalk Roll John Deere $ 503.78 $ 453.78

HXE110675 LH Intermeshing Stalk Roll John Deere $ 525.90 $ 475.90

HXE110676 RH Intermeshing Stalk Roll John Deere $ 525.90 $ 475.90

HXE141569 LH Chopping Stalk Roll John Deere $ 729.51 $ 679.51

HXE141570 RH Chopping Stalk Roll John Deere $ 729.51 $ 679.51

9

COMBINE PARTS

JohnDeere.com/CombineParts

Complete gear cases are available when one goes down. Choose from different options including John Deere, John Deere Reman, and A&I Products.

Row Unit Gear Cases


40 and 90 Series

PG200881 Gear Case John Deere Reman $1,865.67

A-AH209794 Gear Case A&I Products $1,701.67

600 Series (-745100)

DE30417 Gear Case John Deere $3,683.68 $3,388.99

600 Series (745100–785000)


600 Series (785001-)


Row Unit Slip ClutchesNUMBER DESCRIPTION TYPE LIST NOW

40 and 90 Series

AH146250 Slip clutch 11/8" Hex Shaft $283.37 $260.69

AH209784 Slip Clutch 11/4" Hex Shaft $247.95 $228.09

600 Series (-745100)

AH218768 Slip Clutch Without StalkMaster $236.44 $217.49

KXE10109 Slip Clutch with Hardware With StalkMaster $590.91 $543.59

AXE19434 Slip Clutch With StalkMaster $584.61 $537.79

600 Series (745100–785000)

AXE50867 Slip Clutch Without StalkMaster $339.21 $312.09


600 Series (785001-)

AXE50867 Slip Clutch Without StalkMaster $339.21 $312.09


When replacing the StalkMaster blades make sure to inspect and replace the bushings as well.

StalkMaster™ Blades


600 Series (-745100)

HXE36504 Blade John Deere $22.58 $20.79

H233284 Blade Bushing John Deere $11.60 $10.69

A-H233284 Blade Bushing A&I Products $ 8.38

600 Series (745101-)

HXE36504 Blade John Deere $22.58 $20.79

HXE24237 Blade Bushing John Deere $15.54 $14.29

A-HXE24237 Blade Bushing A&I Products $12.14

Trash DeflectorNUMBER DESCRIPTION TYPE LIST NOW

600 Series (-745100)

H227244 Deflector $157.49 $144.89

600 Series (745100-)

AXE18146 Deflector 30", 36", 38" $215.94 $198.69

AXE47158 Deflector 20", 22" $244.09 $224.59

A-AH209794

COMBINE PARTS

10

Ear-saver shields are integrated into the row-unit deck shields. The ear gates, as they are referred to, prevent ears of corn from falling out from the front of each row unit.

Ear Savers


40 and 90 Series

H166582 Ear Saver John Deere $ 5.36 $4.89

A-H166582 Ear Saver A&I Products $ 4.18

600 Series

HXE33313 Ear Saver Inner Points John Deere $10.70 $9.79

A-H226324 Ear Saver Inner Points A&I Products $ 5.58

HXE38892 Ear Saver Outer Points John Deere $10.70 $9.79

A-H226325 Ear Saver Outer Points A&I Products $ 5.83

John Deere has improved the composite shoe cover with an embedded reflective strip in the top of the cover, and simplified the installation to just snap on over the existing cast point, eliminating the need to remove the bolt.

Shoe Cover

NUMBER DESCRIPTION LIST NOWH207895 Shoe Cover $25.95 $23.89

To minimize the chance of kernel damage when harvesting high-moisture corn (greater than 25 percent moisture), an insert can be installed in the auger floor that will close the gap between the floor and the auger flighting. While not required for use with the insert, a second kit can be installed that provides a lower auger position to further enhance grain quality.

High Moisture Kits


Auger Floor Insert

BXE10960 606C, 706C Series (6-Row 30") John Deere $ 743.08 $ 683.59

BXE10962 608C, 708C Series (8-Row 30") John Deere $1,264.09 $1,162.99




KXE10428 612FC, 712FC Series (12-Row 30") John Deere $1,996.45 $1,836.69




Auger Height Adjustment Kit

BXE10973 606C, 608C, 706C, 708C (PIN -805,000) John Deere $ 163.72 $ 150.59BXE10974 612C, 616C, 618C, 712C, 716C, 718C

(PIN -805,000)John Deere $ 401.34 $ 369.19

11JohnDeere.com/CombineParts

Tapered Tip

Anti-Buildup Zone

Controlled Breakage Zone

Full Section Undergoes Austempering Heat Treatment

Innovative Engineering

John Deere sickle sections are engineered for maximum performance.■ The tapered tip and consistent serrations maintain sharpness■ The anti-buildup zone reduces clogging and increases capacity■ The innovative breakage zone allows the section to break, rather than bend, without damaging guards–all

while reducing overall cutterbar weight■ Austempering heat treatment gives the entire section strength and balanced wear

Platform Parts

Fine-Tooth Sections – Recommended for small grains. Coarse-Tooth Sections – Recommended for green-stemmed crops like soybeans. No-Till Sections – Recommended in no-till conditions to prevent corn stalks from pinching.


900, 900F, 900R Series – 3" Cutting Systems

H207929 Dura-Lite Fine-Tooth John Deere $1.94 $1.79

H207930 Dura-Lite Coarse-Tooth John Deere $1.94 $1.79

600 Series – 4" Cutting Systems Dura-Twin Sections

H153329 Fine-Tooth John Deere $3.04 $2.59

A-H153329 Fine-Tooth A&I Products $2.63

H163131 Coarse-Tooth John Deere $3.04 $2.59

A-H163131 Coarse-Tooth A&I Products $2.39

600 Series – 4" Cutting Systems No-Till Sections (Short/Long)

H215025 Fine-Tooth John Deere $3.51 $2.99

H215064 Coarse-Tooth John Deere $3.51 $2.99

A-H215064 Coarse-Tooth A&I Products $2.56

Sections

Dura-Twin

Dura-Lite

No-Till Section

12

Don’t discount your guardsOnly replacing your knives is like sharpening one side of your scissors. A dull edge on your guards can sacrifice cut quality and potentially force you to run slower…costing acres per hour.

John Deere offers green, high-wear guards that come standard from the factory. These guards go through an added boronization process that gives them twice the wear life compared with the standard black guards. If your conditions don’t require that added wear life, the standard, black guards are case hardened all the way around. This provides a longer wear life compared to some aftermarket guards that are only induction hardened at the corners of the cutting edge.

Make sure you’re using the right cutting system for your primary crop.■ Long-point guards and fine tooth sections – small grains■ Blunt-point guards and coarse-tooth sections – soybeans■ No-till sections and guards – to help prevent corn stalks from hairpinning

Visit JohnDeere.com/CombineParts to learn more.


900, 900F, 900R Series

H145791 Green, Standard Heat Treated John Deere $11.87 $10.89

H153719 Silver, Double Heat Treated John Deere $15.43 $14.19

600 Series – Long Point (Small Grains)

H213508 Black, Standard (Short-Long-Short) John Deere $21.18 $17.99

H213405 Black, Standard (Long-Short-Long) John Deere $21.18 $17.99

H229540 Green, High Wear (Short-Long-Short) John Deere $31.21 $28.69

A-H229540 High Wear (Short-Long-Short) A&I Products $18.60

H229539 Green, High Wear (Long-Short-Long) John Deere $31.21 $28.69

A-H229539 High Wear (Long-Short-Long) A&I Products $18.60

600 Series – Blunt Point (Coarse Grains)

H213507 Black, Standard (Short-Long-Short) John Deere $21.18 $17.99

H213398 Black, Standard (Long-Short-Long) John Deere $21.18 $17.99


A-H229538 High Wear (Short-Long-Short) A&I Products $15.95


A-H229537 High Wear (Long-Short-Long) A&I Products $15.95

600 Series – No-Till Blunt Point (Coarse Grains)



Blunt Point

H145791Long Point

No-Till Blunt

Guards

13

COMBINE PARTS


Reel Fingers help guide crop into the platform. John Deere reel fingers are made out of a unique high-strength poly that increases the stiffness of the fingers for increased strength.

Reel Fingers


900 Series (-645300)

H127035 Finger (Package of 100) John Deere $ 1.97 $ 1.79

900 Series (645301–685400)

AH153175 Full Bat (Package of 180) John Deere $ 3.16 $ 2.89

H142315 LH Bat John Deere $ 4.13 $ 3.79

A-H142315 LH Bat (Package of 10) A&I Products $ 3.06

H142314 RH Bat John Deere $ 4.13 $ 3.79

A-H142314 RH Bat (Package of 10) A&I Products $ 3.06

900F (685401-), 900R (685401-), 600F, 600R, 600D (-784999), 600FD (-784999) Series

AH166489 Full Bat (Package of 10) John Deere $34.49 $31.69

AH166490 LH Bat (Package of 10) John Deere $40.72 $37.49

AH166491 RH Bat (Package of 10) John Deere $40.72 $37.49

KXE10477 No Bat (Package of 10) John Deere $53.25 $48.99

HXE28926 Auxiliary Finger John Deere $15.81 $14.49

600D (785000-), 600FD (785000-), 700D Series

KXE10423 Finger (Package of 10) John Deere $73.42 $67.49

AH166489

AH166490

AH166491

AH206160

AH214869

As crop material moves to the center of the platform, auger fingers, finger bearings, and finger guides deliver material to the feeder house. The fingers and bearings should be checked periodically and replaced if there is excessive play. John Deere offers two different types of auger fingers:Steel Fingers■ John Deere fingers are made out of boron steel and heat-treated for long wear ■ A narrow, breakaway groove in the finger protects it and allows the finger to break,

rather than bend, to prevent damage to the augerComposite Fingers■ John Deere composite fingers are known for their strength and resiliency in most

crop conditions■ Reduce damage from broken fingers

Auger Fingers Kits


900, 900F, 900R Series

AH206160 Steel Finger Kit (Set of 8) John Deere $103.15 $ 94.89

AH202965 Composite Finger Kit (Set of 8) John Deere $103.53 $ 95.19

600F, 600R Series

AH214868 Steel Finger Kit (Set of 10) John Deere $121.90 $112.09

A-AH214868 Steel Finger Kit (Set of 10) A&I Products $ 89.36

AH214869 Composite Finger (Set of 10) John Deere $ 81.24 $ 74.69

A-AH214869 Composite Finger (Set of 10) A&I Products $ 55.27

COMBINE PARTS

14

Reduce wrapping of crop material in tough, wet, viney crops (such as soybeans, peas, straight-cut edible beans, and canola) with the reel tine flip-over kit, which also increases visibility to the front of the draper.

Reel Tine Flip-Over Kit


BXE10262 625D, 630D, 635D (MY08–16) and 630FD, 635FD (MY12–15) $3,424.30 $3,150.39

BXE10263 640D (MY08–16) and 640FD (MY12–15) $3,424.30 $3,150.39

BXE10760 630FD and 635FD (MY16-) $3,456.20 $3,179.69

BXE10761 640FD and 645FD (MY16-) $3,456.20 $3,179.69

BXE10873 625D, 630D, 635D (MY17) and 725D, 730D, 735D (MY18-) $3,456.20 $3,179.69

BXE10874 640D (MY17 and 740D (MY18-) $3,456.20 $3,179.69

This height-sensing bundle for 620F, 622F, 625F, 630F, and 635 HydraFlex™ Platforms adapts ground-contacting sensors for use when the flex cutterbar is locked into the rigid position. For use with 50-, 60-, 70-, and S-Series combines.

Header Height Sensors for Rigid Mode

NUMBER APPLICATION LIST NOW

BXE10119 MY 11 and newer 600 Series Flex Platforms $3,378.10 $3,107.89

The short crop dividers are recommend for small grains and standing drilled beans. The dividers knock down less crop and are a direct replacement for the long crop dividers.

Crop Dividers


900, 900F, 600F, 630FD (-784999), 635FD (-784999), 640FD (-784999)

AH147232 Crop Divider $149.25 $137.29

630FD (785000-), 635FD (785000-), 640FD (785000-), 645FD

KXE10397 Crop Divider (Set of 2) $331.85 $305.29AH147232

Feed Drum Anti-Wrap Kit – This kit is recommended for tall, damp crop conditions to reduce drum wrapping. The attachment consists of two brackets that mount near the outer edge of the feed drum and reduce the likelihood of crop wrapping the drum.Center Section Seal Kit – This kit minimizes grain loss when direct-cutting canola and can be utilized for other small grain crops with up to 45 percent decrease in losses from the center feed section compared to previous models.

Crop Feeding Enhancements


Feed Drum Anti-Wrap Kit

BXE10736 600D Series $165.39 $152.19

BXE10039 600FD Series (-764999) $552.20 $507.99

BXE10408 600FD Series (765000-) $552.20 $507.99

Center Section Seal Kit

BXE10851 600D, 700D Series $686.40 $631.49


Walker Combine Parts

StrongBox batteries are built tough to demanding John Deere factory specifications. No other brand compares with the high-quality construction and internal and external components. For a more economical alternative, our Performance branded batteries can offer a great solution in lighter-use applications.

Walker Combine Batteries

NUMBER DESCRIPTION TYPE

TY25272A 9000, 9010, 9050, 9060 Series StrongBox Activated

SWHDOE-27 9000, 9010, 9050, 9060 Series Performance

See us for pricing.

Ease the hassle of charging your combine’s battery. Convenient location makes it easy to jump-start or charge your batter at ground level. No need to lug a battery charger and booster cables up your combine’s ladder to jump-start the battery.

Battery Boost Terminal Kit


AH224079 9000, 9010, 9050, 9060 Series John Deere $93.67 $86.19

Excessive tension is a major cause of feederhouse conveyor chain wear. It is normal for center strands to sag more because of the weight of the slat and the upward force of crop material.

Walker Combine Feederhouse Chain


Feederhouse Chain (9400, 9410, 9450, 9500, 9510, 9550, 9560)

AH137604 28 Slat John Deere $ 932.34 $ 857.79

A-AH137604 28 Slat A&I Products $ 673.13

AH207777 34 Slat John Deere $1,057.31 $ 972.69


AH137845 49 Slat John Deere $1,116.99 $1,027.59


Feederhouse Chain (9600, 9610, 9650, 9660)




A-AH143400 74 Slat A&I Products $1,173.26

Feederhouse Repair Slats (Bolt-On)

H206436 9400, 9410, 9450, 9500, 9510, 9550, 9560 John Deere $ 29.66 $ 27.29

A-H206436 9400, 9410, 9450, 9500, 9510, 9550, 9560 A&I Products $ 22.32

H207776 9600, 9610, 9650, 9660 John Deere $ 25.25 $ 23.19

A-H207776 9600, 9610, 9650, 9660 A&I Products $ 17.23

The quick, easy way to change your combine’s front feederhouse drum height. Simply remove the retaining pin and position the left- and right-hand levers to the desired position for small grain or corn. Kit is not for sidehill combines.

Feederhouse Drum Stop Kit


AH210753 9000, 9010, 9050 Series John Deere $294.75 $271.19

COMBINE PARTS

16

John Deere Black-Hardened Rasp Bars ■ Serrated rasp bar has a gently contoured surface design that wears to an even,

smooth profile■ Recommended for use in harvesting corn, popcorn, soybeans, malting barley,

edible beans, or any seed crop where high quality grain is demanded

John Deere Chrome-Hardened Rasp Bars ■ Provide twice the wear life of the non-chromed rasp bars ■ Feature a smooth, contoured profile design with sharp surface edges ■ Ideal for general use in all crops where long-lasting, efficient threshing

performance is desired

Rasp Bars


Rasp Bars (9400, 9410, 9450, 9500, 9510, 9550, 9560)

Black-HardenedAH205117 LH John Deere $411.37 $378.49AH205118 RH John Deere $411.37 $378.49

A-V12068H Includes LH, RH, and Hardware A&I Products $522.78

Chrome-Hardened

AH205119 LH John Deere $705.48 $648.99

AH205120 RH John Deere $705.48 $648.99

A-V12068C Includes LH, RH, and Hardware A&I Products $786.53

Rasp Bars (9600, 9610, 9650, 9660)

Black-Hardened

AH205122 LH John Deere $509.34 $468.59

AH205123 RH John Deere $509.34 $468.59

A-V12072H Includes LH, RH, and Hardware A&I Products $639.55

Chrome-Hardened

AH205124 LH John Deere $791.18 $727.89

AH205125 RH John Deere $791.18 $727.89

A-V12072C Includes LH, RH, and Hardware A&I Products $899.90

Black-Hardened

Chrome-Hardened

John Deere Concaves■ Strict manufacturing processes maintain the correct radius of the concave with a

tolerance of 5/64-in.■ Flame-cut sidebars ensure easier gauging of the concave-to-cylinder clearance ■ Deeper crossbars and support bars reduce concave bending ■ 13-bar concave was standard on corn and small grain combines

Concaves


AH150497 13-Bar John Deere $1,317.60 $1,212.19

A-AH150497 13-Bar A&I Products $1,028.67

AH136605 14-Bar John Deere $1,267.03 $1,165.69

A-AH136605 14-Bar A&I Products $ 989.19

AH135647 Spike Tooth John Deere $1,710.09 $1,573.29

AH150496 13-Bar John Deere $1,495.22 $1,375.59

A-AH150496 13-Bar A&I Products $1,174.42

AH136604 14-Bar John Deere $1,451.70 $1,335.59

AH135646 Spike Tooth John Deere $1,630.76 $1,500.29

AH150497

17

COMBINE PARTS


Elevator chains should be checked for stretch and adjusted or replaced as required. The rubber paddles can develop rounded corners and edges, resulting in grain leakage. The most common reason for excessive elevator chain wear is too much tension. A chain that has too much tension will get tighter as the chain conveys material and could cause shaft and bearing failures.

Clean Grain and Tailings Elevator Chains


Clean Grain Elevator Chain

AH162441 9400, 9410, 9500, 9510 John Deere $337.88 $304.09

A-AH162441 9400, 9410, 9500, 9510 A&I Products $247.13

AH162442 9600, 9610 John Deere $346.67 $311.99

A-AH162442 9600, 9610 A&I Products $278.00

AH162058 9450, 9550, 9560, 9650, 9660 John Deere $478.93 $430.99

A-AH162058 9450, 9550, 9560, 9650, 9660 A&I Products $319.44

Tailings Elevator Chain


A-AH131074 9000, 9010, 9050, 9060 Series A&I Products $227.60

Make sure the cleaning shoe auger gears are properly adjusted to prevent excessive wear. Once the gears touch, back off the clamp 0.8 mm (1/32-in.). Do not run the gears too tight.

Shoe Grain Supply Augers

NUMBER DESCRIPTION TYPE LIST NOWAH169020 LH Flighting

(9000, 9010, 9050, 9060 Series)John Deere $240.73 $216.69

A-AH169020 LH Flighting (9000, 9010, 9050, 9060 Series)

A&I Products $184.26

AH169021 RH Flighting (9000, 9010, 9050, 9060 Series)

John Deere $240.40 $216.39

A-AH169021 RH Flighting (9000, 9010, 9050, 9060 Series)


Vertical Unloading AugersNUMBER DESCRIPTION TYPE LIST NOWRegular – Standard auger from the factory on 9000, 9010, 9050 Series

AH124852 9400, 9410, 9500, 9510, 9600, 9610 John Deere $ 585.81 $ 527.19

A-AH124852 9400, 9410, 9500, 9510, 9600, 9610 A&I Products $ 413.86

AH171550 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

John Deere $ 617.72 $ 555.89

A-AH171550 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

A&I Products $ 419.47

Grass – Double-flighted auger provides gentler crop handling

AH140081 9400, 9410, 9450 (-695100), 9500, 9510, 9550 (-695200), 9600, 9610, 9650 (-695300)

John Deere $ 818.22 $ 736.39

AH171558 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

John Deere $ 973.24 $ 875.89

High Wear – Constructed with heavy-duty segmented flighting

AH154962 9400, 9410, 9500, 9510, 9600, 9610 John Deere $ 967.63 $ 870.89

A-AH154962 9400, 9410, 9500, 9510, 9600, 9610 A&I Products $ 725.63

AH171554 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660

John Deere $1,155.57 $1,039.99

A-AH171554 9450 (695101-), 9550 (695201-), 9560, 9650 (695301-), 9660


10% OffReceive 10% off list price of new John Deere O.E.M. combine augers and chains April 22 through August 9, 2019. Offer may be discontinued or modified without notice at any time. Offer cannot be combined with other offers. See your local John Deere dealer for details. Discount reflected in NOW price.

COMBINE PARTS

18

Different chaffers are available from:1. Non-Adjustable Fixed – Recommended for small grains such as wheat, barley, etc.2. Adjustable General Purpose – Recommended for corn, soybeans, grain sorghum,

small grains, oil seed crops, and specialty crops.3. Adjustable Deep Tooth – Recommended in high-yielding corn or when harvesting

on slopes where the larger louver opening of these elements can help to increase cleaning-shoe capacity.

Top Chaffer


9400, 9410, 9450, 9500, 9510, 9550, 9560

AH130486 Fixed John Deere $537.37 $494.39

A-AH130486 Fixed A&I Products $366.25

AH172949 General Purpose John Deere $396.72 $364.99

A-AH172949 General Purpose A&I Products $331.93

AH172951 Deep Tooth John Deere $422.37 $388.59

A-AH172951 Deep Tooth A&I Products $341.50

9600, 9610, 9650, 9660

AH130485 Fixed John Deere $465.69 $428.39

A-AH130485 Fixed A&I Products $345.08

AH172948 General Purpose John Deere $475.46 $437.39

A-AH172948 General Purpose A&I Products $409.92

AH172950 Deep Tooth John Deere $452.54 $416.29

A-AH172950 Deep Tooth A&I Products $383.67

Different sieves are available from:1. Non-Adjustable Fixed – Recommended for small grains such as wheat, barley, etc. 2. Adjustable General Purpose – Recommended for corn, soybeans, grain sorghum,

small grains, oil seed crops, and specialty crops.

Bottom Sieve


9400, 9410, 9450, 9500, 9510, 9550, 9560

AH131217 Fixed (1/8-in. Round Hole) John Deere $582.91 $536.29

A-AH131217 Fixed (1/8-in. Round Hole) A&I Products $307.63



AH130160 General Purpose (9400, 9500) John Deere $420.90 $387.19

A-AH130160 General Purpose (9400, 9500) A&I Products $393.53

AH172957 LH General Purpose John Deere $568.31 $522.79

AH172956 RH General Purpose John Deere $568.31 $522.79

9600, 9610, 9650, 9660





AH130159 General Purpose (9600) John Deere $464.39 $427.19

AH172955 LH Gereral Purpose John Deere $487.55 $448.49

AH172954 RH Gereral Purpose John Deere $487.55 $448.49

A-AH172951

19

COMBINE PARTS


Chopper balance must be maintained. Follow operator manual to ensure proper blades are replaced. Depending on type of chopper, either 6 or 8 blades must be replaced to keep balance.

Straw Chopper Knives


Regular Cut Straw Chopper (One Straight Blade per Support)


Fine Cut Straw Chopper (Two Straight Blades per Support)



Wide Spread Fine Cut Straw Chopper (Two Paddle Blades per Support)



AH205910

AH205909

A great way to get your grain tank cleaned out before changing crops or storing your combine for the season. Simply hang a bucket on the hinge of this high-density polyethylene chute, unsnap the access door, and capture grain without spilling. It works for draining moisture as well.

Grain Tank Cleanout Kit




Installing an additional grain-level sensor enables an operator to more easily tell when the grain tank is full when harvesting on sidehills.

Additional Grain Tank Sensor


BH78464 9050, 9060 Series John Deere $235.40 $216.59

Enhance performance on hillsides. The tall center chaffer divider and grain agitators prevent grain from shifting to one side of the cleaning shoe, keeping it spread evenly across the chaffer for reduced grain loss.

SideHill Performance Kit


AH221775 9000, 9010, 9050, 9060 Series $355.40 $326.99

Protect the floor of your combine cab with a cardboard mat. The mats are cutout specifically for the 9000, 9010, 9050, and 9060 series combines. Comes in package of five.

Cardboard Floor Mats



Make sure you are ready for harvest with Genuine John Deere OEM Filters.Please visit JohnDeere.com/FilterOverviews for more information about filters for your machine.

1 Primary and Secondary Engine Air Filters Primary – AH148880 Secondary – RE63932 9510, 9550, 9610, 9650

2 Engine Oil Filter DZ101880 9500, 9510, 9550 (-156457) 9600, 9610, 9650 (-199999)

3 Fuel Filter AR86745 9500, 9510, 9550 (-156457) 9600, 9610, 9650 (-199999)

4 Fuel Water Separator AT81478 9000 and 9010 series

5 Hydraulic/Hydrostatic/Main Engine Gearcase Filters AH128449 9000, 9010, 9050 Series

6 Cab Fresh Air Filter AH115833 (Standard), AH168783 (Heavy Duty) 9000, 9010, 9050 Series

1

2

5

6

4

3

John Deere OEM Filters

20

9070STScombine_filters_links.pdf 1 1/16/18 9:24 AM

RECIRCULATION AIR FILTERH220870Clean or replace every200 hours, and as required

HEAVY-DUTY CAB AIR FILTERAH168783Clean or replace every 200 hours, and as required.

ENGINE FUEL FILTERSRE541922 (9570)RE522878 (9570)RE525523 Filter Kit (9670 & 9770)RE532952 (Primary 9870)RE533910 (Secondary 9870)Replace fuel filters every 500 hours.

PRODRIVE™ FILTER (if equipped)AH128449 (9770–9870)Replace after first 100 hours, then every 400 hours.

ENGINE, AIR, PRIMARYAH222225Change annually and clean or change as required.

ENGINE OIL FILTERRE504836 (9570)RE509672 (9670 & 9770)RE572785 (9870)Replace after 100 hours and then every 250 hours. Fill Crankcase with seasonal viscosity grade oil or Torq-Gard™ Supreme (250 hours change interval). If using Plus-50™ oil and a John Deere filter, the service interval can be extended by 50 percent.Example: 250 hours extends to 375 hours

HYDROSTATIC CHARGE FILTER (ProDrive™ Only)AN207368 (9770 & 9870)Replace every 400 hours.

CHARGE PUMP/MAINHydraulic/Main Engine Gear Case Filter AH128449Filter change interval for all three filters is 400 hours.

CABAir FilterAH115833Clean or replace every 200 hours, and as required.

ENGINE, AIR SECONDARYAH212295Change Secondary filter only with Primary filter. Change annually, or as required with Primary Air Filter.

9070 Series STS Combines 9570 STS, 9670 STS, 9770 STS, 9870 STSFilter Overview with Service Intervals

Visit www.JohnDeere.com/FilterOverviews to find the filter guide for your model.


22

STS- and S-Series Combine Parts

StrongBox batteries are built tough to meet demanding John Deere factory specifications. No other brand compares with the high-quality construction and internal and external components. For a more economical alternative, our Performance branded batteries can offer a great solution in lighter-use applications.

STS- and S-Series Combine Batteries

NUMBER DESCRIPTION TYPETY25879A 9560, 9660, 9760, 9860, 9570, 9670,

9770, 9870, S550, S650, S660, S670StrongBox Activated

SWHP-31E 9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670

Performance

TY26783A S680, S690 StrongBox Activated

See us for pricing.

Excessive tension is a major cause of feederhouse conveyor chain wear. It is normal for center strands to sag more because of the weight of the slat and the upward force of crop material.

STS- and S-Series Feederhouse Chain


9560, 9570, S550

AH231006 Feederhouse Chain John Deere $1,123.84 $1,033.89

A-AH231006 Feederhouse Chain A&I Products $ 793.96

9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870

AH224926 Feederhouse Chain John Deere $1,076.91 $ 990.79

A-AH224926 Feederhouse Chain A&I Products $ 928.12

S650, S660, S670, S680, S690 below Serial Number -775001

AXE24307 Feederhouse Chain John Deere $1,701.52 $1,565.39

A-AXE24307 Feederhouse Chain A&I Products $1,168.75

S650, S660, S670, S680, S690 above Serial Number 775001-

AXE27247 Feederhouse Chain John Deere $2,207.21 $2,030.59

A-AXE27247 Feederhouse Chain A&I Products $1,501.65

Get the high-capacity drive power you need to harvest high-yielding corn at faster ground speeds. Compared to standard variable feederhouse drives, this heavy-duty drive offers stronger belts and larger gears along with more durable shafts and bearings.

*Not for use with 612 StalkMaster Corn Head. Combine must be equipped with heavy-duty feederhouse drive.

High-Torque Variable Speed Feederhouse Drive


9660, 9760, 9860, 9670, 9770, 9870, S660, S670, S680, S690

BH84447 High-Torque Feederhouse Drive John Deere $8,144.40 $7,492.79


Tech Tip: Keep a clearance gauge handyJohn Deere offers a convenient gauge that measures wear on threshing elements, separator tines, and concaves to help you know when it’s time to replace them. Order yours today.

Combine Clearance Gauge: AH204933 LIST $3.60 NOW $3.29

Visit JohnDeere.com/CombineParts to learn more.

It is important to note that three different threshing element designs are needed for the Bullet Rotor:■ First Row of Front Cone: Requires one kit of (3) threshing elements designed for

mounting on the front surface of the front cone.■ Second Row of Front Cone: Requires one kit of (3) threshing elements designed for

mounting on the surface of the mid-section of the front cone.■ Rear Portion: Requires three kits of (3) threshing elements designed to mount on

the rear portion of the rotor.All threshing elements listed below are available in kits of (3) only. To maintain rotor balance, all three must be installed in a row around the circumference of the rotor.

STS- and S-Series Threshing Elements


Corn and Grain Elements for 9560, 9570, S550

AH219770 1st Row John Deere Standard Wear Rifled $834.66 $767.89

AH219771 2nd Row John Deere Standard Wear Rifled $505.49 $465.09

KXE10160 3rd–5th Row John Deere Standard Wear Rifled $328.66 $302.39

AH219773 3rd–5th Row John Deere High-Wear Rifled $475.82 $437.79

Corn and Grain Elements for 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690

AH216674 1st Row John Deere Standard Wear Rifled $758.33 $697.69

A-AH216674 1st Row A&I Products High-Wear Rifled $565.33

AH216675 2nd Row John Deere Standard Wear Rifled $491.13 $451.79

A-AH216675 2nd Row A&I Products High-Wear Rifled $394.39

AH216677 3rd–5th Row John Deere Standard Wear Rifled $255.34 $234.89

A-AH216677 3rd–5th Row A&I Products Standard Wear Rifled $178.72

AH216678 3rd–5th Row John Deere High-Wear Rifled $355.61 $327.19

A-AH216678 3rd–5th Row A&I Products High-Wear Rifled $282.22

All separator tines listed below are available in kits of (3) only. To maintain rotor balance, all three must be installed in a row around the circumference of the rotor.

STS- and S-Series Separator Tines


9560, 9570, S550

AH209452 Standard John Deere $185.18 $170.39

9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690

AH208554 Standard John Deere $123.07 $113.19

A-AH208554 Standard A&I Products $ 78.73

AH209123 High Wear John Deere $195.04 $179.39

A-AH209123 High Wear A&I Products $161.73

COMBINE PARTS

24

■ Small-Wire Concaves are standard on small-grain combines and are recommended for use in wheat, barley, and other cereal crops. Additionally, they are recommended for use in specialty crops such as grass seed.

■ Large-Wire Concaves are standard on rice combines and available as an option on corn and small-grain combines. They are recommended for rice, sorghum, soybeans, and corn.

■ Round Bar Concaves are standard equipment on corn combines and are recommended for use in corn and soybeans. Additionally, they are recommended for use in specialty crops such as edible beans and food corn.

Concaves listed below come in sets of three.

STS- and S-Series Concaves


Small-Wire Concaves (9560, 9570, S550)

BH84289 Standard Wear John Deere $2,547.60 $2,343.79

A-V18054 Standard Wear A&I Products $2,181.38

Small-Wire Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690)

BXE10388 Standard Wear John Deere $3,025.00 $2,782.99

A-V18026 Standard Wear A&I Products $2,001.42

BXE10389 High Wear John Deere $3,630.00 $3,339.59

Large-Wire Concaves (9560, 9570, S550)


Large-Wire Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690)

BXE10390 Standard Wear John Deere $2,915.00 $2,681.79


Round Bar Concaves (9560, 9570, S550)


Round Bar Concaves (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690)


Concave inserts provide the additional threshing action required for harvesting small grains with the round bar concaves. Concave inserts are easy to install and remove as you switch between crops.

STS- and S-Series Concave Inserts


Concave Inserts (9560, 9570, S550)

BH84294 Set of 2 John Deere $ 905.30 $832.89

Concave Inserts (9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690)

BH84308 Set of 2 John Deere $1,018.60 $937.09

• For additional threshing in hard-to-thresh crops like wheat, barley, clover, flax, and some grass seeds

• Available for small and large wire concaves• Covers the front open portion of small and large wire concaves on the bottom side

Concave Cover Plates


9560, 9570, S550

BH84293 Cover Plates John Deere $339.90 $312.69

9650, 9750, 9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690, S760, S770, S780, S790

BH84534 Cover Plates John Deere $616.00 $566.69

A-BH81876 Cover Plates A&I Products $159.48

25

COMBINE PARTS


Elevator chains should be checked for stretch and adjusted or replaced as required. The rubber paddles can develop rounded corners and edges, resulting in grain leakage.

STS- and S-Series Elevator Chains

NUMBER DESCRIPTION TYPE LIST NOWClean Grain Elevator Chain

AXE28559 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, S550, S650, S660

John Deere $456.57 $410.89

A-AXE28559 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, S550, S650, S660


AXE28560 9770, 9870, S670, S680 John Deere $617.43 $555.69

A-AXE28560 9770, 9870, S670, S680 A&I Products $472.58

AXE16681 S690 John Deere $985.78 $887.19

Tailings Elevator Chain

AH148021 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670

John Deere $229.61 $206.59

A-AH148021 9650, 9750, 9560, 9660, 9760, 9860, 9570, 9670, 9770, 9870, S550, S650, S660, S670


AXE10556 S680 (-785000), S690 (-785000) John Deere $330.90 $297.79

AXE47615 S680 (785001-), S690 (785001-) John Deere $244.15 $219.69

Tech Tip:The most common reason for excessive elevator chain wear is too much tension. A chain that has too much tension will get tighter as the chain conveys material and could cause shaft and bearing failures.

Make sure the cleaning shoe auger gears are properly adjusted to prevent excessive wear. Once the gears touch, back off the clamp 0.8 mm (1/32-in.). Do not run the gears too tight.

STS- and S-Series Shoe Grain Supply Augers


AH146786 LH (All STS- and S-Series) John Deere $155.39 $139.89

A-AH146786 LH (All STS- and S-Series) A&I Products $103.64

AH146787 RH (All STS- and S-Series) John Deere $155.39 $139.89

A-AH146787 RH (All STS- and S-Series) A&I Products $103.64

There are three different types of vertical augers:Regular – Standard wear were base equipment on S550, S650, and S660 combines High Wear – Option on S550, S650, and S660 combines High Wear/High Unloading Rate – Standard on S670, S680, and S690

STS- and S-Series Vertical Unloading Augers


9650, 9750, 9560, 9660, 9760, 9570, 9670, S560

AH146840 Regular John Deere $ 516.30 $ 464.69

A-AH146840 Regular A&I Products $ 384.04

AH164070 High Wear John Deere $ 762.87 $ 686.59

A-AH164070 High Wear A&I Products $ 543.63

9660, 9760, 9860, 9670, 9770, 9870

AXE12921 High Wear/High Unloading Rate John Deere $1,081.55 $ 973.39

A-AXE12921 High Wear/High Unloading Rate A&I Products $ 857.92

S550, S650, S660

AXE53848 Regular John Deere $ 596.55 $ 536.89

AXE53849 High Wear John Deere $ 813.37 $ 731.99

S660, S670, S680, S690

AXE18070 High Wear/High Unloading Rate John Deere $1,164.25 $1,047.79

A-AXE18070 High Wear/High Unloading Rate A&I Products $ 819.31

10% OffReceive 10% off list price of new John Deere O.E.M. combine augers and chains April 22 through August 9, 2019. Offer may be discontinued or modified without notice at any time. Offer cannot be combined with other offers. See your local John Deere dealer for details. Discount reflected in NOW price.

COMBINE PARTS

26

Different chaffers are available from:1. Non-Adjustable Fixed – Recommended for small grains such as wheat, barley, etc.2. Adjustable General Purpose – Recommended for corn, soybeans, grain sorghum,

small grains, oil seed crops, and specialty crops.3. Adjustable Deep Tooth – Recommended in high-yielding corn or when harvesting

on slopes where the larger louver opening of these elements can help to increase cleaning-shoe capacity.

STS Top Chaffer

Different sieves are available from:1. Non-Adjustable Fixed – Recommended for small grains such as wheat, barley, etc.2. Adjustable General Purpose – Recommended for corn, soybeans, grain sorghum,

small grains, oil seed crops, and specialty crops.

STS Bottom Sieve


9650 STS, 9750 STS, 9660 STS, 9760 STS, 9860 STS, 9670 STS, 9770 STS, 9870 STS

AH211936 General Purpose John Deere $1,055.16 $ 970.69

AXE20455 General Purpose with Touchset John Deere $1,254.40 $1,153.99

AH212248 Deep Tooth John Deere $1,007.19 $ 926.59

A-AH212248 Deep Tooth A&I Products $1,099.81

AXE20457 Deep Tooth with Touchset John Deere $1,382.03 $1,271.49


9650 STS, 9750 STS, 9660 STS, 9760 STS, 9860 STS, 9670 STS, 9770 STS, 9870 STS

AH211944 General Purpose John Deere $ 967.94 $ 890.49

A-AH211944 General Purpose A&I Products $1,044.92

AXE20456 General Purpose with Touchset John Deere $1,325.03 $1,218.99

A-AH212241 General Purpose with Touchset A&I Products $ 867.24

AH213857 Fixed Tooth (1/8" Round Hole) John Deere $1,310.17 $1,205.39

AH213860 Fixed Tooth (3/8" Round Hole) John Deere $1,132.70 $1,042.09

A-AH213860 Fixed Tooth (3/8" Round Hole) A&I Products $ 825.79

AH212249 Deep Tooth John Deere $1,676.75 $1,542.59

AXE20458 Deep Tooth with Touchset John Deere $1,745.15 $1,605.49

A-AH212247 Deep Tooth with Touchset A&I Products $ 833.81

These concaves give more versatility to match varying crop conditions. Plus they’re lighter and easier to change and install. Available for S-Series and STS Combines.*

*Not available for 9560 STS, 9570, or S550 Combines.

Kondex® Revolution™ Half-Width Concaves


BXE11144 MaxThresh™ Kit $1,961.03 $1,804.09

BXE11145 MaxRound™ Kit $1,924.89 $1,770.89

AXE76998 Plate, Concave Front Lip $ 235.71 $ 216.89

AXE76999 Concave, Half Width, MaxThresh $ 902.89 $ 830.69

AXE77000 Concave, Half Width, MaxRound $ 865.26 $ 795.99

27

COMBINE PARTS


John Deere 70- and S-Series combines use a unique wing blade. The wing blade design moves more air, providing an even spread of material across the entire width of the cutting platform. The cutting edge of the wing blade is made of wear-resistant material that extends wear life. Chopper balance must be maintained. Follow operator manual to ensure proper blades are replaced. Depending on type of chopper, either 6 or 8 blades must be replaced to keep balance.

STS- and S-Series Straw Chopper Knives


9650, 9750, 9660, 9760, 9860

AH205910 Straight Blade John Deere $ 53.70 $ 49.39

A-AH205910 Straight Blade A&I Products $ 50.59

AH205909 Paddle Blade John Deere $ 92.06 $ 84.69

A-AH205909 Paddle Blade A&I Products $ 69.15

9570, 9670, 9770, 9870, S550

AH225937 Wing Blade John Deere $138.19 $127.09

AH225940 Scoop Blade John Deere $172.24 $158.49

A-AH225940 Scoop Blade A&I Products $125.10

S660, S670, S680, S690

KXE10255 Wing Blade John Deere $175.97 $161.89

KXE10256 Straight Blade John Deere $199.66 $183.69

A-KXE10256 Straight Blade A&I Products $145.02

From the outside, aftermarket belts may look just the same, but the value of a belt is mostly found on the inside. The top section of a belt is the tension section that stretches as the belt forms around the sheave or pulley while the bottom section compresses around it.

The center section is where a belt gets its strength. Perfectly aligned cords running through the center of John Deere belts give them strength and longevity.

For more information and aftermarket comparison, visit JohnDeere.com/CombineParts.

It’s what’s on the inside that counts.

28

COMBINE ATTACHMENTS Do MoreAdd More

ActiveYield maximizes the system’s accuracy with no effort or time away from harvest. Every field, every variety, ActiveYield delivers quality yield data. ActiveYield senses the weight of the grain in the grain tank as it fills. The combine uses the weight information to calibrate the yield system continually throughout harvest. This gives the operator optimized system accuracy and reliable yield data.

ActiveYield™ Retrofit Kit


BXE10503 MY12–MY15 S-Series Combines $3,548.60 $2,798.60

BXE10797 MY16- S-Series Combines $2,641.10 $2,291.10*Compatible with corn, soybeans, wheat, barley, and canola.*Not compatible with S660 and S760 with manual grain tank extensions.

Add the Grain Tank Mirror Kit to any S-Series Combine to increase visibility of the grain tank.

Grain Tank Mirror Kit

NUMBER LIST NOW

KXE10458 $154.84 $129.84

Improve comfort while harvesting with this simple upgrade. Foot pegs can be installed on all S-Series Combines going back to MY12.

Foot Pegs

NUMBER LIST NOW

KXE10454 $198.91 $148.91

The fast, easy way to tell if your grain tank is full when harvesting on sidehills. Includes mounting hardware and clamps.

Additional Grain Tank Sensor


BH81598 70-Series $244.20 $224.69

BXE10270 S-Series $244.20 $224.69

The Unloading Auger Boot on current-model combines is now available as a retrofit for all high-unloading rate systems (3.2/3.8 bps). The design of the unloading auger boot delivers a more controlled stream of crop to the grain-handling equipment.

Unloading Auger Boot

NUMBER LIST NOW

HXE71069 $192.19 $176.79


Enjoy hands-free access and improved viewing of your iPad®, iPhone®, or other mobile device from the seat of your cab. These mounting brackets are adjustable, providing easy access without interfering with visibility or machine controls.

In-Cab Mobile Device Mounting


BXE10481 Guide Bar (MY12–MY13 S600 Series) $231.00 $212.49

BXE10927 Guide Bar (MY14–MY17 S600 Series) $196.90 $181.09

BXE10480 Slide Kit (MY12–17 S600 Series) $ 70.40 $ 64.79

BXE10479 Tablet Mount (MY12–17 S600 Series) $124.30 $114.39

BRE10015 Cell Phone Mount (MY12–17 S600 Series) $ 67.10 $ 61.69

BXE10901 9–10-in. Tablet Mount (S700 Series) $184.80 $169.99

BXE10864 11–12-in. Tablet Mount (S700 Series) $196.90 $181.09

■ Upgrade your factory lights to LED with one simple kit ■ Kit includes lights for all front headlights located at top of cab ■ Direct fit, plugs into existing machine wiring harness

LED Light Kits

NUMBER DESCRIPTION TYPE LIST

9000, 9010, 9050, 9060 Series with Rectangle Lights

A-WL9000KT Kit (6 Rectangle Lights) A&I Products $565.25

9060, 9070 Series with Oval Lights

A-WL9697KT Kit (8 Oval Lights) A&I Products $804.67

A-WL9697KT

NUMBER DESCRIPTION PKG. QTY. LIST NOW

BXE11034 ICA2 Attachment Bundle 1 $10,787.70 $9,924.69

BXE11035 ICA2 Attachment Bundle 1 $10,787.70 $9,924.69

BXE10948 Active Terrain Adjustment 1 $ 3,894.00 $3,582.49

Get Sound Advice from Combine Advisor™

With a trifecta of technologies designed to maximize your harvest, Combine Advisor is now available as a field-installed retrofit kit for S700 Series Combines (MY18 and newer). The robust suite helps you target optimal settings and then automates the combine to maintain peak performance in changing conditions. Combine Advisor includes:■ HarvestSmart™ to automate feed rate■ Active Terrain Adjustment™ to manage changing terrain■ Auto Maintain w/ActiveVision™ to monitor crop conditions

Stop by today to learn more about Combine Advisor.

TAKE’EM DOWNProtect your tires from tough corn stalks 8-position angle

height adjustment

Torsion spring for consistent down pressure

Solid bar spring limiter reduces residue entanglement

10" wide skid made of abrasion-resistant steel

Stalk Stryker™ knocks stalks over, helping to minimize tire wear for all field equipment, prevent erosion, and promote plant fiber breakdown. Available for John Deere, Case IH, New Holland, Drago, and Geringhoff.JohnDeere.com/StalkStryker

www.StalkStryker.com

15–20% lighter for reduced weight on the header

Easy 1-pin removalWithout Stalk Stryker

With Stalk Stryker

30

Battle tough corn stalks with Stalk Stryker from A&I Products. Kits without shoes include mounting fixtures and hardware, and shoes must be ordered separately. Kits with shoes include all components for operation.

Stalk Stryker™ for John Deere Heads

NUMBER DESCRIPTION APPLICATION LIST

John Deere 600 Series:

A-STR2600 2-Row Frame Kit 606, 608, 612, 616, 618 Corn Heads $ 543.43

A-STR2600C 2-Row Frame Kit with Shoes 606, 608, 612, 616, 618 Corn Heads $1,040.39

A-STR4600 4-Row Frame Kit 608, 612, 616, 618 Corn Heads $ 681.02

A-STR4600C 4-Row Frame Kit with Shoes 608, 612, 616, 618 Corn Heads $1,643.71

A-STR0606 6-Row Frame Kit 606 Corn Heads $ 905.39

A-STR0606C 6-Row Frame Kit with Shoes 606 Corn Heads $2,201.17

A-STR0808 8-Row Frame Kit 608 Corn Heads $1,205.05


A-STR6600 6-Row Frame Kit 612, 616, 618 Corn Heads $1,065.40

A-STR6600C 6-Row Frame Kit with Shoes 612, 616, 618 Corn Heads $2,393.17

A-STR1212 12-Row Frame Kit 612 Corn Heads – 30" Rows $1,751.00

A-STR1212C 12-Row Frame Kit with Shoes 612 Corn Heads – 30" Rows $4,569.42

A-STR1212N 12-Row Frame Kit 612 Corn Heads – 20" and 22" Rows $1,613.20

A-STR1212NC 12-Row Frame Kit with Shoes 612 Corn Heads – 20" and 22" Rows $4,202.22

A-STR1616 16-Row Frame Kit 616 Corn Heads $2,263.26


Accessories:

A-STR101 10" Shoe Assembly $ 227.57

A-PS101 10" Poly Skid with Hardware $ 40.35

A-STR290 Storage Bracket $ 60.57


The GT-5300 provides all the benefits of our MoistureMatch Grain Moisture Tester (SW20300) and more. Featuring cutting-edge technology, the GT-5300: ■ Automatically averages a selectable number of tests ■ Provides the actual moisture-limit percentage ■ Stores user calibration and averages for each grain ■ Offers a larger, illuminated LCD display

GT-5300 Grain Moisture Tester


SW5300 Grain Moisture Tester $310.39 $291.79

The GT-30300 Grain Moisture Tester really measures up. Featuring the latest technology, the SW30300: ■ Provides temperature range between 40–160°F ■ Measures moisture and test weight (no pre-weighing) ■ Provides moisture range between 6–45% ■ Tests 16 grains (program space for over 40 grains) ■ Connects to diagnostics via USB ■ Features large back-lit LCD screen and fonts ■ Repeatability and accuracy ± 0.2% in normal moisture range ■ Comes with 2-year limited warranty

GT-30300 Grain Moisture Tester New—Hot Grain Capabilities up to 160°F


SW30300 GT-30300 Grain Moisture Tester $504.76 $474.49

Loewen Combine Parts have built a reputation on the tradition of serving the farmer with quality, affordable aftermarket parts for almost 60 years. Loewen has been a part of the large A&I Products selection for several years, and offers an option to provide you the Right Part at the Right Price.

Loewen products are available for many makes of combines, including: John Deere, Case-IH, New Holland, Massey Ferguson, Gleaner, Challenger, and more.

Staple products include concaves, chaffers, sieves, feeder chains, elevator chains, rasp bars, and more! Ask your John Deere dealer for more information about Loewen and A&I Products.

3232

Stock Up on Precision Ag Solutions for Harvest

Get ready for harvest with the right attachments for your combine displays and receivers.

Combine – AMS Display & Receiver Brackets


PF90430 GreenStar™ Dual Display Bracket $100.36 $ 90.29

PF90500 GreenStar Display Bracket, 60 or 70 Series Combines $302.50 $272.29

BPF11186 Cornerpost Display Bracket Kit, S-Series Combines $218.90 $196.99

BPF11356 Universal GPS Bracket $237.60 $213.79

PF91009 StarFire™ Receiver Deluxe Shroud Conversion Bracket $121.00 $108.89

AH211594 Combine StarFire Position Receiver Bracket – 60 Series $134.01 $120.59

PF10758 Combine StarFire Position Receiver Bracket – 50 Series $ 61.98 $ 55.79

Mass-flow sensors are mounted in the grain tank on the top of the clean-grain elevator head assembly. The sensor is used for accurate yield measuring.

Combine Mass Flow and Moisture Sensors


PF90866 Sensor Kit, Mass Flow and Moisture – 9400, 9500, or CTS $2,783.00 $2,504.69

PF90867 Sensor Kit, Mass Flow and Moisture – 9400, 9500, or CTS $2,783.00 $2,504.69

PF90864 Sensor Kit, Mass Flow and Moisture – 9600 Models $2,783.00 $2,504.69




PF90874 Sensor Kit, Mass Flow and Moisture – 50 Series Models $3,267.00 $2,940.29

PF90873 Sensor Kit, Mass Flow and Moisture – 60 or 70 Series Models $2,963.40 $2,667.09

AutoTrac™ Intergrated Machine Kits and GreenStar™ Ready Kits make it easy for you to be Precision Ag-ready when the time arrives. The AutoTrac Machine Kits include the appropriate machine steering controller when necessary and AutoTrac Ready accessories. The display, receiver, and software to complete the system are sold separately. These field-installed kits are an integrated guidance solution for John Deere machines and are compatible with the GreenStar 3 or GreenStar 2 system components. Gain the edge and get the results you want and need with genuine John Deere AMS components.

Guidance & Machine Control

PF90697NUMBER DESCRIPTION APPLICATION LIST NOWPF90876 AutoTrac Combine Machine Kit 50 Series $6,473.50 $5,826.19

PF90875 AutoTrac Combine Machine Kit 60 Series $5,566.00 $5,009.39

PF90629 AutoTrac Combine Machine Kit 70 Series $5,566.00 $5,009.39

PF90863 AutoTrac Tractor Machine Kit 8000 Series $5,142.50 $4,628.29



BPF10139 GreenStar Ready Universal Guidance Kit, Upgradeable

John Deere and Other Makes Equipment

$ 825.00 $ 742.49

PF90742 AutoTrac RowSense Kit for Universal Sensor

Combines $ 847.00 $ 762.29

PF91001 AutoTrac RowSense Universal Sensor Corn Heads $1,023.00 $ 920.69

PF90697 AutoTrac RowSense Mechanical Feelers 30-in. or 75cm Spacing $1,023.00 $ 920.69

PF90755 AutoTrac RowSense Retrofit Kit 50 or 60 Series John Deere Combine

$ 423.50 $ 381.19

PF90757 AutoTrac RowSense Retrofit Kit 90 Series Corn Head $ 665.50 $ 598.99

Hard Urethane

Soft Urethane

Vibration Resistant Seal Design

Fully Encapsulated Pleat Ends

Rigid Structural Support

High Efficiency Nanofiber Media

NUMBER DESCRIPTION APPLICATIONRE587791 Primary Filter, 354mm 8225R (120000-), 8245R–8370R (090001-), 8320RT–8370RT (912001–920000), 8400R (115000-)

RE587792 Secondary Filter, 354mm 8225R (120000-), 8245R–8370R (090001-), 8320RT–8370RT (912001–920000), 8400R (115000-)

RE587793 Primary Filter, 320mm 8130–8530, 8230T–8430T, 8225R–8345R (000101–053099), 8295RT–8345RT (900101–907100), 8235R–8360R (016001–090000), 8310RT–8360RT (902501–912000)

RE587794 Secondary Filter, 320mm 8130–8530, 8230T–8430T, 8225R–8345R (000101–053099), 8295RT–8345RT (900101–907100), 8235R–8360R (016001–090000), 8310RT–8360RT (902501–912000)

Filters That Regenerate – With a Reduced Need for Cleaningwith Genuine John Deere Air Filters

Upgraded Air Filters For 8X30 Series and 8R Tractors■ High efficiency nonfiber media technology■ Surface loading media sheds dust with engine vibration■ More contaminate is captured on media surface compared to cellulose■ 10x fewer particles pass through filter compared to cellulose■ Available exclusively from your John Deere dealer

33JDParts.JohnDeere.com

See us for pricing.

TRACTOR PARTS

34

NUMBER DESCRIPTION TYPE LIST NOWWater Pumps:

RE546906 6010, 6030, 6003, 6005, 6015, 6D, 6030 Premium, 7210–7510, 7220–7520, 7030 Premium

John Deere $ 311.33 $286.42

SE501609 6010, 6030, 6003, 6005, 6015, 6D, 6030 Premium, 7210–7510, 7220–7520, 7030 Premium

John Deere Reman $ 219.43 $201.88

A-RE505980 6010, 6030, 6003, 6005, 6015, 6D, 6030 Premium, 7210–7510, 7220–7520, 7030 Premium


RE500214 7600, 7700, 7800, 8100–8400 (-009999) John Deere $ 441.51 $406.19

SE501012 7600, 7700, 7800, 8100–8400 (-009999) John Deere Reman $ 337.84 $310.81

A-RE500214 7600, 7700, 7800, 8100–8400 (-009999) A&I Products $ 277.34

RE521502 7610–7810, 7720–7920, 8000 (010000-), 8010, 8020, 9000, and 9020 John Deere $ 472.16 $434.39

SE501596 7610–7810, 7720–7920, 8000 (010000-), 8010, 8020, 9000, and 9020 John Deere Reman $ 362.36 $333.37

A-RE521502 7610–7810, 7720–7920, 8000 (010000-), 8010, 8020, 9000, and 9020 A&I Products $ 260.64

Radiator:

RE165030 7210–7510 John Deere $ 794.05 $730.53

A-RE165030 7210–7510 A&I Products $ 690.62

RE63188 7600–7800, 7610–7810 (SN -089999) John Deere $ 955.69 $879.23

A-RE63188 7600–7800, 7610–7810 (SN -089999) A&I Products $ 746.75

RE159541 8000 and 8010 John Deere $1,054.09 $969.76

A-RE159541 8000 and 8010 A&I Products $ 823.65

Alternators:

AL166645 6020, 6015, 6030, 7220–7520 – 90 amp John Deere $ 503.46 $463.18

SE501829 6020, 6015, 6030, 7220–7520 – 90 amp John Deere Reman $ 402.78 $370.56

A-AL166645 6020, 6015, 6030, 7220–7520 – 90 amp A&I Products $ 325.77

Cab Glass:

L213354 Door (LH), Tinted, For 6100–6400, 6110–6410, 6120–6420, 6405, 6605, 6215–6715, 7220–7520

John Deere $ 235.06 $216.26

A-L169102 Door (LH), 6100–6400, 6110–6410, 6120–6420, 6405, 6605, 6215–6715, 7220–7520


L213351 Rear Window, For 6100–6400, 6110–6410, 6120–6420, 6405, 6605, 6215–6715, 7220–7520

John Deere $ 204.43 $188.08

A-L213351 Rear Window, For 6100–6400, 6110–6410, 6120–6420, 6405, 6605, 6215–6715, 7220–7520


L213355 Door (RH), For 6200–6400, 6110–6410, 6120–6420, 6405, 6605, 6215–6715, 7220–7520

John Deere $ 251.51 $231.39

A-L169103 Glass, Door (RH), For 6200–6400, 6110–6410, 6120–6420, 6405, 6605, 6215–6715, 7220–7520


Only your John Deere dealer can offer you the value of choice by providing three options to meet your parts needs: Genuine John Deere parts, John Deere Reman, and aftermarket alternatives from A&I Products. Our extensive selection of parts means you get the right part with the right fit all at the right price.

John Deere 6000/7000/8000/9000 Series Tractor Parts

Note: For parts that have a core charge, the price shown is the exchange price after the core has been returned.


TRACTOR PARTS

John Deere released the Independent Link Suspension (ILS) with model year 2002. Since then we have made improvements to several of the components. If it’s time to replace the steering and suspension parts on your ILS front end, see your John Deere dealer. Improvements include: Easier greasing of inner tie rod. New design of outer tie rod prevents cover plates from pushing out under extreme pressures. Ball joint part improvements keep ball from pushing out the top of the knuckle.

Independent Link Suspension

NUMBER DESCRIPTION APPLICATION LIST NOWRE587967 Inner Tie Rod End All 8-Series Tractors with ILS $ 729.04 $ 692.59

RE583653 Outer Tie Rod End All 8-Series Tractors with ILS $ 514.06 $ 488.36

RE587968 Tie Rod Assembly (inner and outer)

All 8-Series Tractors with ILS $1,285.04 $1,220.79

RE580643 Control Arm Ball Joint All 8-Series Tractors with ILS $ 568.72 $ 540.28

When it’s time to replace those worn or damaged front axle parts on your John Deere tractor, we have the parts to meet your needs. We carry original equipment replacement parts, designed and tested to meet factory standards. If a value offering meets your needs, we also carry A&I Products aftermarket parts.

Front Axle Parts

NUMBER APPLICATION TYPE LIST NOWTie-Rod End:

RE12325 50, 55, 60 Series Row-Crop, 7600, 7700, 7800 John Deere $ 74.91 $ 68.92

A-RE12325 50, 55, 60 Series Row-Crop, 7600, 7700, 7800 A&I Products $ 55.43

RE12326 50, 55, 60 Series Row-Crop, 7600, 7700, 7800 John Deere $ 82.40 $ 75.81

A-RE12326 50, 55, 60 Series Row-Crop, 7600, 7700, 7800 A&I Products $ 64.54 Inner Tie-Rod End:

AR63588 30, 40, 50, and 55 Series Row-Crop (small frame) John Deere $ 32.55 $ 29.95

A-AR63588 30, 40, 50, and 55 Series Row-Crop (small frame) A&I Products $ 27.94

AR63589 30, 40, 50, 55, and 60 Series Row-Crop (large frame)

John Deere $ 43.00 $ 39.56

A-AR63589 30, 40, 50, 55, and 60 Series Row-Crop (large frame)


AR27351 3010, 3020, 4000, 4020, 4320, 4230 John Deere $ 22.21 $ 20.43

A-AR27351 3010, 3020, 4000, 4020, 4320, 4230 A&I Products $ 17.75 Outer Tie-Rod End:

AR51584 2510, 2520, 3010, 3020, 4020, 4320, 4230 John Deere $ 36.54 $ 33.62

A-AR51584 2510, 2520, 3010, 3020, 4020, 4320, 4230 A&I Products $ 29.20

AR63592 4030–4430, 4040–4440, 4050–4455 (16 1/8") John Deere $ 53.85 $ 49.54

A-AR63592 4030–4430, 4040–4440, 4050–4455 (16 1/8") A&I Products $ 43.04

AR63833 4630, 4640, 4840, 4650 , 4850, 4555–4955, 4560–4960 – Regular Front End

John Deere $ 65.91 $ 60.64

A-AR63833 4630, 4640, 4840, 4650 , 4850, 4555–4955, 4560–4960 – Regular Front End


AL168708 6000, 6005, 6010, 6015, 6020 Series – MFWD Axle – LH

John Deere $203.36 $187.09

A-AL116740 6000, 6005, 6010, 6015, 6020 Series – MFWD Axle – LH


AL168709 6000, 6005, 6010, 6015, 6020 Series – MFWD Axle – RH

John Deere $186.43 $171.52

A-AL116741 6000, 6005, 6010, 6015, 6020 Series – MFWD Axle – RH


TRACTOR PARTS

36

Beltline, post, and headliner kits are available as replacement parts for row-crop, 4WD, and utility tractors with Sound-Gard bodies. Made of pre-cut brown or black original equipment upholstery/insulation material for a precise fit. Two foam parts have been added to the row-crop kits to improve the fit behind the seat. Insulation is a full two inches thick in key areas for greater sound-deadening capacity.

Sound-Gard® Body Upholstery Kits

NUMBER DESCRIPTION APPLICATION LIST NOWRE52945 Beltline Acoustical Upholstery – Black (SGB # -185706) 40 Series Row Crop Tractors $294.30 $270.76

RE57259 Beltline Acoustical Upholstery – Black (SGB # 185707-) 40 Series Row Crop Tractors $339.81 $312.63

RE48532 Post Kit (Black) 30 and 40 Series Row Crop Tractors $129.67 $119.30

RE223619 Headliner Kit, 30 and 40 Series Row Crop Tractors 30 and 40 Series Row Crop Tractors $586.10 $539.21

RE52947 Beltline Acoustical Upholstery – Brown 50 Series Row Crop Tractors $383.37 $352.70

RE155148 Beltline Acoustical Upholstery – Brown 55 and 60 Series Row Crop Tractors $397.81 $365.99

RE155149 Cab Post Kit 55 and 60 Series Row Crop Tractors $113.00 $103.96

Cab Upholstery Kits for 7-, 8-, and 9-Series TractorsNUMBER DESCRIPTION APPLICATION LIST NOWRE221550 LH Fender, w/ Field Office 8000, 8010, 8020, 9000, 9020 $283.99 $261.27

RE221551 LH Fender, w/ Instructional Seat 8000, 8010, 8020, 9000, 9020 $319.85 $294.26

RE221549 LH Fender, w/ Cup Holder 8000, 8010, 8020, 9000, 9020 $284.01 $261.29

R221552 Upholstery, RH Console (SN 010000-) 8000, 8010, 8020 $251.33 $231.22

R257816 Rear RH Cab Post 7720–7920, 8000, 8010, 8020, 8030, 9020 $ 84.25 $ 77.51

R257815 Rear LH Cab Post 7720–7920, 8000, 8010, 8020, 8030, 9020 $ 87.06 $ 80.10

R124235 Rear RH Upper Trim 8000, 8010, 8020, 9000, 9020 $ 90.43 $ 83.20

R134755 Rear LH Upper Trim 8000, 8010, 8020, 9000, 9020 $ 98.25 $ 90.39

RE215719 Upholstery Kit 7000, 7010 $731.27 $672.77

RE183605 Headliner, Fabic 7000, 7010 $344.06 $316.54

RE43477 Headliner, Vinyl 7000, 7010 $301.48 $277.36

A&I Sound-Gard Cab Upholstery KitsNUMBER DESCRIPTION APPLICATION LISTA-CKT300E Cab Foam Kit – Early 40 Series, Black 3040, 3140, 3640, 4040, 4240, 4440, 4640, 4840 for

Sound-Gard Cab Serial Number 185706 and Below$142.79

A-CKT305L Cab Foam Kit – Late 40 Series, Black 3040, 3140, 3640, 4040, 4240, 4440, 4640, 4840 for Sound-Gard Cab SN 185707 and Above

$176.25

A-CKT310E Cab Foam Kit – Early 30 Series, Black 4030, 4230, 4430, 4630 for Sound-Gard Cab Serial Number 63623 and Below

$123.86

A-CKT315L Cab Foam Kit – Late 30 Series, Black 4030, 4230, 4430, 4630 for Sound-Gard Cab Serial Number 63624 and Above

$138.42

A-CPK400 Corner Post Upholstery Kit, Black 4040 (2WD), 4240 (2WD), 4440 (2WD), 4640 (2WD), 4840 (2WD)

$ 87.42


TRACTOR PARTS

Tractor Hydraulic Pumps

Note: For parts that have a core, the price shown is the exchange price after the core has been returned.

Clutch PartsNUMBER DESCRIPTION TYPE LIST NOWClutch Disk with Facing

RE234264 4030, 4040–4640, 4050–4650, 4055–4755, 4560–4760 – Quad Range John Deere $ 76.07 $ 69.98

A-AR95827 4030, 4040–4640, 4050–4650, 4055–4755, 4560–4760 – Quad Range A&I Products $ 60.79

RE234306 4030, 4040–4640, 4050–4650, 4055–4755, 4560–4760 – Quad Range John Deere $ 82.67 $ 76.06

A-RE17420 4030, 4040–4640, 4050–4650, 4055–4755, 4560–4760 – Quad Range A&I Products $ 62.14

RE238331 4520–4620, 4430–4630, 4240–4840 – Powershift John Deere $ 61.58 $ 56.65

A-RE28023 4520–4620, 4430–4630, 4240–4840 – Powershift A&I Products $ 47.87

RE234259 4520, 4620, 4640–4840, 4650–4850, 4555–4955, 4560–4960 – Powershift John Deere $ 50.79 $ 46.73

A-RE62897 4520, 4620, 4640–4840, 4650–4850, 4555–4955, 4560–4960 – Powershift A&I Products $ 41.49

Clutch Plate

R544016 4030, 4040–4440, 4050–4450, 4055–4455 – Quad Range John Deere $172.42 $158.63

A-R112385 4030, 4040–4440, 4050–4450, 4055–4455 – Quad Range A&I Products $135.41

R61066 4030, 4040–4640, 4050–4650, 4055–4755, 4560–4760 – Quad Range John Deere $132.33 $121.74

A-R61066 4030, 4040–4640, 4050–4650, 4055–4755, 4560–4760 – Quad Range A&I Products $ 98.67

R46418 4520, 4620, 4430–4630, 4240–4840 – Powershift John Deere $ 23.64 $ 21.75

A-R46418 4520, 4620, 4430–4630, 4240–4840 – Powershift A&I Products $ 17.45

R85626 4050–4850, 4055–4955, 4760–4960 – Powershift John Deere $ 98.52 $ 90.64

A-R85626 4050–4850, 4055–4955, 4760–4960 – Powershift A&I Products $ 75.05


AR94660 50ccm – 4010, 4020, 4030, 4040, 4050, 4055 Series – 2WD John Deere $1,676.25 $1,542.15

A-AR94660 50ccm – 4010, 4020, 4030, 4040, 4050, 4055 Series – 2WD A&I Products $1,161.06

AR94661 65ccm – 4000, 4020, 4030, 4040, 4650–4850 FWD, 30 and 40 Series 4WD John Deere $1,796.93 $1,653.18

A-AR94661 65ccm – 4000, 4020, 4030, 4040, 4650–4850 FWD, 30 and 40 Series 4WD A&I Products $1,051.94

RE20839 65ccm – 4555–4955, 4560–4960 John Deere $2,879.51 $2,649.15

AL161041 25ccm – 6000, 6010, 6020, 7200–7200, 7210–7410 John Deere $ 863.52 $ 794.44

PG200864 25ccm – 6000, 6010, 6020, 7200–7200, 7210–7410 John Deere Reman $ 604.39 $ 556.04

AL200830 28ccm – 6010, 6020, 6030, 6M John Deere $ 623.18 $ 573.33

A-AL200830 28ccm – 6010, 6020, 6030, 6M A&I Products $ 497.89

AL202473 35ccm – 6030, 6M John Deere $1,300.42 $1,196.39

AL161043 41ccm – 6000, 6010, 6020, 7000, 7010 John Deere $1,942.01 $1,786.65

PG200865 41ccm – 6000, 6010, 6020, 7000, 7010 John Deere Reman $1,359.40 $1,250.65

RE60267 45ccm – 8000, 8010 John Deere $2,226.94 $2,048.78

PG203168 45ccm – 8020 John Deere Reman $1,558.81 $1,434.11

PG203172 57ccm – 8000, 8010 John Deere Reman $2,178.03 $2,003.79

RE563717 85ccm – 8130–8530 John Deere $5,317.03 $4,891.67

PG204251 85ccm – 8130–8530 John Deere Reman $3,721.93 $3,424.18

RE228005 74ccm – 9000, 9020, 9030, 9360R–9560R John Deere $4,509.30 $4,148.56

PG202076 74ccm – 9000, 9020, 9030, 9360R–9560R John Deere Reman $3,156.51 $2,903.99

TRACTOR PARTS

38

Hydraulic quick disconnect couplers are available in both standard and deluxe versions. The standard couplers allow coupling and uncoupling of hydraulics with pressure from the implement side. The deluxe couplers allow for coupling and uncoupling of hydraulics with pressure from the tractor and/or implement side.

Hydraulic Quick Couplers

NUMBER DESCRIPTION SERIES LIST NOWAL200979 Hydraulic Quick Coupler,

Standard6030, 6030 Premium, 6M, 6R $ 91.55 $ 84.23

AL221083 Hydraulic Quick Coupler, Deluxe 6M, 7330 $111.19 $102.29

RE577560 Deluxe Quick Coupler 7000, 7010, 7020, 7030, 8020, 8030, 8R, 9020, 9030, 9R

$100.97 $ 92.89

RE52981 Deluxe Quick Coupler 8000, 8010 $155.13 $142.72

RE206778 Retrofit kit to ISO Couplers Converts 20, 30, and 40 Series JD to ISO Style Couplers

$203.51 $187.23

Tractor Hydraulic PartsNUMBER DESCRIPTION TYPE LIST NOWHydraulic Repair Kits

RE29103 Hydraulic Pump Repair Kit – 10–40 Series Row Crop Tractors (49 ccm pumps)

John Deere $ 89.73 $ 82.55

A-RE29103 Hydraulic Pump Seal Kit – 10–40 Series Row Crop Tractors (for 49 and 66 ccm pumps)

A&I Prodcuts $ 69.04

AR82570 Breakaway Coupler Overhaul Kit for 10–40 Series Utility, Row Crop and 4WD Tractors

John Deere $ 29.04 $ 26.72

A-AR82570 Breakaway Coupler Overhaul Kit for 10–40 Series Utility, Row Crop and 4WD Tractors


RE10924 SCV Overhaul Kit for 40–55 Series Utility, 20–60 Series Row Crop and 40-70 Series 4WD

John Deere $ 42.64 $ 39.23

A-RE10924 SCV Overhaul Kit for 40–55 Series Utility, 20–60 Series Row Crop and 40–70 Series 4WD


RE206776 ISO Coupler Overhaul Kit for 10, 20, 30, 40 Series Row Crop and 4WD Tractors

John Deere $ 30.01 $ 27.61

A-RE206776 ISO Coupler Overhaul Kit for 10, 20, 30, 40 Series Row Crop and 4WD Tractors


RE241164 SCV Repair Kit for 300 Series Valves – 6000, 6010, 6020

John Deere $ 121.40 $ 111.69

Load-Control Shafts

R46513 20–40 Series Row Crop Tractors (small frame) John Deere $ 115.87 $ 106.60

A-R46513 20–40 Series Row Crop Tractors (small frame) A&I Products $ 89.57

R33883 2010, 3010, 3020, 4030 Tractors John Deere $ 119.30 $ 109.76

A-R33883 2010, 3010, 3020, 4030 Tractors A&I Products $ 91.85

Valves

AR86535 Valve, Poppet Assembly for 40–55 Series Utility, 20–60 Series Row Crop and 40–70 Series 4WD

John Deere $ 38.64 $ 35.55

A-AR86535 Valve, Poppet Assembly for 40–55 Series Utility, 20–60 Series Row Crop and 40–70 Series 4WD


AL171118 SCV Valve Assembly (200 Series) – 6000, 6010, 6020, 7000 Series

John Deere $1,301.26 $1,197.16

RE239127 SCV Valve Assembly (300 Series) – 6000, 6010, 6020, 7630–7930

John Deere $1,518.53 $1,397.05

RE61121 SCV Valve Assembly 8000, 8010, 9000 John Deere $3,676.36 $3,382.25


TRACTOR PARTS

When things heat up and you need to replace your AC compressor, make sure you talk to the experts at your John Deere dealer. Many aftermarket offerings are automotive-style compressors and not meant for off-road applications. Compressor offerings from John Deere include original equipment new compressors, John Deere Reman compressors, and A&I Products. John Deere Reman compressors are remanufactured back to the original John Deere specifications. A&I Products offer AC compressors without the oil so they can be used in either R12 or R134a applications.

AC Compressors

NUMBER DESCRIPTION STYLE TYPE LIST NOWAL176857 6200–6400, 6210–6410, 6405, 6605 10PA John Deere $570.13 $524.52

SE503057 6200–6400, 6210–6410, 6405, 6605 10PA John Deere Reman $456.12 $419.63

A-AL155836 6200–6400, 6210–6410 10PA A&I Products $397.00

AH169875 72–7400, 7210–7510, 7020, 7030, 8000, 8010, 8020, 8030, 8R, 9020, and 9030 10PA John Deere $720.22 $662.60

SE503065 72–7400, 7210–7510, 7020, 7030, 8000, 8010, 8020, 8030, 8R, 9020, and 9030 10PA John Deere Reman $580.13 $533.72

A-AH169875 Denso Style w/ Clutch – 72–7400, 7210–7510, 7020, 7030, 8000, 8010, 8020, 8030, 8R, 9020, and 9030

10PA A&I Products $360.86

SE503047 4000, 4020–4620, 4030–4630, 4040–4840, 5020, 6030, 7020, 8430–8630, 8440–8640, – R134a

A6 John Deere Reman $495.99 $456.31

A-RE60697 Compressor, New w/ Clutch (1 groove 5.75" pulley, 12V) – 4030–4630, 4040–4840, 8430–8630, 8440–8640

A6 A&I Products $406.51

SE503051 4230–4630, 4040–4840, 4050–4850, 4055–4955, 4560–4960, 8450–8850, 8560–8960 – R134a

6E John Deere Reman $454.76 $418.38

A-RE12513 Compressor, New, Denso Style w/ Clutch (ear mtd., 5.75" pulley) 4050–4650, 4055–4755, 4560–4960, 8450–8850, 8560–8960

6E A&I Products $361.36

Note: For parts that have a core charge, the price shown is the exchange price after core has been returned.

The receiver/drier is designed to remove moisture from the air-conditioning system. Over time, it will become saturated with moisture. Moisture combines with refrigerants and creates acids that accelerate the corrosion of internal component parts. Therefore, if an air-conditioning system has been in service for any extended period of time and is opened for service, it is wise to replace the receiver/drier.

Receiver Drier

NUMBER DESCRIPTION TYPE LIST NOWRE576834 4050, 4055, 8040, 7000, 7010, 7030, 9000, 9020, 9030, 7R, 8R, 8RT, 9R, 9RT John Deere $ 46.51 $ 42.79

A-804-464 R12/R134a Filter Drier A&I Products $ 31.29

AT162848 8100–8400, 8100T–8400T, 8110–8410, 8110T–8410T John Deere $ 61.12 $ 56.23

A-AT162848 8100–8400, 8100T–8400T, 8110–8410, 8110T–8410T A&I Products $ 43.33

RE576835 7720–7920, 8120–8520, 8120T–8520T, 8130–8430 John Deere $104.19 $ 95.85

AL220790 40, 50, 55, 6000, 6010 Series Utility Tractors – R134A John Deere $ 83.97 $ 77.25

AL220792 6015, 6020 Series John Deere $122.25 $112.47

Expansion ValveNUMBER DESCRIPTION LIST NOWRE577432 2050, 2055, 3050, 3055, 4050, 4055, 4060, 8040, and 8050

Series Tractors$ 60.13 $ 55.32

AL219020 5E, 5M, 5R, 5420, 5520, 5425, 6020, 6030, 6003, 6D, 6M, and 7130–7530 Series Tractors

$145.62 $133.97

RE283957 5010, 6010, 8000, 7020, 7030, 8000, 8010, 8020, 8030, 8R, 9000, 9020, 9030, and 9R Series Tractors

$ 80.48 $ 74.04

TRACTOR PARTS

40

DrawbarNUMBER APPLICATION TYPE LIST NOWL203949 6000, 6005, 6010, 6015, 6020, 6030, 7130,

7230, 6M, 6R – 39" LengthJohn Deere $515.70 $474.44

L114953 6000, 6005, 6010, 6020, 6015, 6030, 7230, 7330 Series Tractors – 45" Length

John Deere $453.27 $417.01

A-L114953 6000, 6005, 6010, 6020, 6015, 6030, 7230, 7330 Series Tractors – 45" Length


R61184 4240, 4440, 4050, 4250, 4450, 4350, 4055, 4255, 4455

John Deere $277.90 $255.67

A-R61184 4240, 4440, 4050, 4250, 4450, 4350, 4055, 4255, 4455


L76093 7000, 7010 Series Tractors John Deere $611.70 $562.76

A-L76093 7000, 7010 Series Tractors A&I Products $312.89

L115073 7420, 7520, 7330, 7430, 6150M, 6170M, 6R John Deere $463.06 $426.02

A-L115073 7420, 7520, 7330, 7430, 6150M, 6170M, 6R A&I Products $306.75

R297783 8100–8400, 8110–8310, 8120–8320 – Cat IV

John Deere $436.52 $401.60

R297781 8400, 8410, 8120–8420, 8R – Cat. III John Deere $410.70 $377.84

Drawbar Pins

AL180110 6000, 6005, 6010, 6015, 6020, 6030, 7130, 7230, 6M, 6R – Cat. 2

John Deere $ 56.86 $ 52.31

AR69988 Multiple Applications John Deere $ 45.11 $ 41.50

RE173568 Pin with Handle, Cat. IV – Multiple Applications

John Deere $110.22 $101.40

RE150871 Pin with Handle, Cat. IV – Multiple Applications

John Deere $ 62.79 $ 57.77

Adjustable stabilizer bars allow the operator to manually adjust the lateral movement of the draft links. The adjustable stabilizer bar can be mounted on the right- and left-hand side of the draft links.

Stabilizer Bars


RE73363 5020, 5025, 5E $233.30 $214.64

RE242457 5M, 5R $204.45 $188.09

RE199501 7020, 7030 $302.18 $278.01

Stabilizer Bar Parts

L175355 Yoke End – 6010, 6020, 6030, 6M, 6R $ 42.42 $ 39.03

AL201044 Link Body – 6010, 6020, 6030, 6M, 6R $135.33 $124.50

AL201045 Link End – 6010, 6020, 6030, 6M, 6R $123.99 $114.07

Made with aluminized steel, these mufflers are sure to hold their strength meeting the durability and reliability you’ve come to expect.

Mufflers


RE20224 4450 Row-Crop Tractor $189.19 $174.05

RE20222 4640, 4650, 4840, and 4850 Row-Crop Tractors $262.82 $241.79

RE222217 4040, 4050, 4240, 4250, 4440, and 4450 Row-Crop Tractors $123.52 $113.64

RE44716 8000, 8000T, 8010, and 8010T Series Tractors $420.03 $357.03


TRACTOR PARTS

Telescopic rearview mirrors provide operators with a wide rear view of the field or road. These mirrors are especially useful when towing wagons or large implements.

Telescopic Mirrors

Add a camera and get a whole new view! The 6R, 7R, 8R, and 9R Series Tractors come equipped with built-in video capability for those who want better visibility when operating large machinery. You can use Voyager cameras, cables, and a special adapter harness on the new R Series Tractors equipped with the touchscreen CommandCenter™ or the GreenStar™ (GS3) 2630 display. These units can utilize one video input.

Voyager Camera System

NUMBER DESCRIPTION APPLICATION LIST NOWSWVCMS20B Voyager Camera with

Mounting Bracket6R/7R/8R/9R Series Tractors $187.76 $176.49

SWCEC25 25-ft. Extension Harness 7R/8R/9R Series Tractors $ 28.26 $ 26.56

SWTY26834 Adapter Harness – R Tractors 7R/8R/9R Series Tractors $103.21 $ 97.02

SWTY26845 Adapter Harness IVS 2630 Monitor

7R/8R/9R Series Tractors $168.93 $158.79

SWTY27027 6R Camera Harness Kit $299.99 $281.99

Our seat covers are designed for maximum operator comfort—with a durable, thick-foam backrest and no seam to dig into the operator’s legs. Compare our quality and prices to see how we outrank locally manufactured new and remanufactured seats.

Replacement Seat Cushions

NUMBER DESCRIPTION LIST

TY26541 Seat Cushion Kit, Black Vinyl, 2-Piece $288.33

TY26545 Seat Cushion Kit, Yellow Vinyl, 3-Piece $146.30

TY26546 Seat Cover, Brown Fabric, 2-Piece $ 56.25

TY26549 Seat Cushion Kit, Brown Fabric $280.22

TY26550 Seat Cushion Kit, Yellow Vinyl, Contoured $330.38TY15953 Complete Seat Top for 30 and 40 Series Row-Crop and 4WD Tractors with

Mechanical-Suspension Seats, 4400, 4420, and 6600 Side Hill, and 6620, 7700, 7720, 8800, and 8820 Combines, 9920, 9930, 9950, and 9960 Cotton Pickers, and 7445 Cotton Stripper

$636.21

NUMBER DESCRIPTION APPLICATION TYPE LIST NOWAL78021 Mirror Head Complete Multiple Applications John Deere $ 79.96 $ 73.56

A-AL78021 Mirror Head; LH or RH Outer Rear View

Multiple Applications A&I Products $ 60.86

AL80126 Left-Hand Manual Telescopic Mirror Kit

Fits 5020, 5025, 5E, 5M, 6000–6030, 6215–6715, 6M, and 7000–7030 Series

John Deere $188.10 $173.05

AL80127 Right-Hand Manual Telescopic Mirror Kit

Fits 5020, 5025, 5E, 5M, 6000–6030, 6215–6715, and 7000–7030 Series

John Deere $188.10 $173.05

A-RE52668 RH Outer Mirror Arm, Non-Telescoping

7000, 7010, 8000, 8010, 8020 Series


A-RE52669 LH Outer Mirror Arm, Non-Telescoping

7000, 7010, 8000, 8010, 8020 Series


BL16110 Mechanical Wide-Angle Telescoping Mirror

Fits 6020 Prem, 6030 Prem, 6M, and 6R

Left-Hand $253.56 $233.28

BL16111 Mechanical Wide-Angle Telescoping Mirror

Fits 6020 Prem, 6030 Prem, 6M, and 6R

Right-Hand $253.56 $233.28

TRACTOR HOT BUYS

Step Kits30-55 Series Row-Crop Tractors.RE61690 LIST – $333.21 NOW – $283.23

3010, 3020, 4010, 4020 Row-Crop Tractors.RE62856 LIST – $349.67 NOW – $297.22

Multiple-Power Outlet StripFits John Deere tractors, combines, sprayers, and other self-propelled equipment.RE68495 LIST – $56.07 NOW – $47.66

Seat AssembliesSuper Comfort Seat Assembly for 6 Series Tractors – MSG95.BL15038 LIST – $2,125.20 NOW – $1,806.42

Instructional Seat for 6020, 6030, 6030 Premium, 7030, 7030 Premium, and 6M Tractors.AL173569 LIST – $ 691.90 NOW – $ 588.12

Tractor Cab Mounting Bracket7R, 8R, and 9R Series Tractors using the existing mount holes.RE317435 LIST – $141.90 NOW – $120.62

Bottom Seat Cushion4055–4455, 4560–4960, 7200–7800, 7210–7810, 8560–8960, 8000, and 9000 Series Tractors.RE163027 LIST – $148.25 NOW – $126.01

See your John Deere dealer to take advantage of these limited time special prices on the parts and attachments listed below.

AM/FM/WB Radio7000, 7010, 7020, 8000, 8010, 8020, 9000, and 9020 Series Tractors.RE575067 LIST – $359.60 NOW – $305.66

Gas Strut – DoorFits 5E, 5M, 5R, 6020, 6030, 6M, and 6R Series Tractor Cabs.AL174358 LIST – $29.87 NOW – $25.39

Fits 6000 and 6010 Series Tractor Cabs.AL110629 LIST – $41.27 NOW – $35.08

Fits 7020, 7030, 8010, 8020, 8030 Series Tractor Cabs.RE234165 LIST – $42.16 NOW – $35.84

MufflerFits 8000, 8000T, 8010, and 8010T Series Tractors.RE44716 LIST – $420.03 NOW – $357.03

42


TRACTOR PARTS

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick Hitch. The iMatch Quick Hitch provides easy hookup and a guaranteed fit for all Category 1 implements designed to meet the ASAE Category 1 Standard S278.6 for quick- attach hitches.

iMatch Quick Hitch

NUMBER DESCRIPTION APPLICATION LIST NOWLVB25976 iMatch Quick Hitch Category 1 with

Adjustable Top Hook. Includes One Set of Bushings (LVU15507)

Category 1, 3-pt. Hitch $376.20 $357.39

LVU12858 One iMatch Quick Hitch Lower Adapter Bushing – Length 33mm (1.3-in.)

$ 24.54 $ 20.89

LVU15507 One iMatch Quick Hitch Lower Adapter Bushing – Length 50mm (1.97-in.)

$ 26.00 $ 22.09

Protect your investment and your pocketbook from potentially costly repairs by installing a John Deere hood guard. Built to withstand tough daily chores, the hood guard provides protection from adverse conditions and potential operational mishaps. See us for the correct hood guard for your machine.

Hood Guards

NUMBER APPLICATION LIST NOWBW15217 Fits 2025R, 2320, 2210, and 2305 Tractors $259.60 $228.39

LVB25998 Fits 3E Tractors $275.00 $241.99

BW15848 Fits 3005, 4005 Tractors $275.00 $241.99

BW15219 Fits 3X20 Series Tractors $275.00 $241.99

BW15221 Fits 4X20 Series Tractors $275.00 $241.99

BW16585 Deluxe Hood Guard Attachment – 3X20 and 4X20 Series, and 3R Tractors

$336.60 $296.19

BW16335 Fits 4M and 4R Series Tractors (less loader only) $298.10 $262.29

BW16989 Deluxe Hood Guard Attachment – 4M and 4R Tractors $170.50 $149.99

BW16765 Fits 5090E, 5090EL, 5090M, 5090R, 5100E, 5100M, 5100MH, 5100R, 5115M, 5115R, 5125R Tractors

$440.00 $387.19

BW15800 Fits 6D Tractors MY12 and Prior (6100D, 6115D, 6130D, 6140D) BW16146

$452.10 $397.79

BW16146 Fits 6D – IT4; MY13–MY15 (6105D, 6115D, 6130D, and 6140D) and 6E-FT4; (6105E, 6120E, 6135E) Tractors

$452.10 $397.79

AXX10012 Fits 6M and 6R Series Tractors $530.20 $466.59

Don’t have a radio head unit in your tractor, no problem! Remove the radio cover, and plug the amplifier directly into your John Deere radio harness and pair your device to stream your music through the factory cab speakers. Place amplifier in the opening, replace the cover and enjoy your favorite music!Features:■ 80 watts max (40-watt RMS) ■ Bluetooth audio (A2DP) ■ Waterproof (IPX6) ■ Operating voltage: 10 - 18VDC ■ Bluetooth pairing button can be flush mounted ■ 10 amp fuse in waterproof container

2-Channel Bluetooth® Amplifier


SWJAHD240BT 2-Channel Bluetooth Amplifier $114.28 $107.42

TRACTOR ATTACHMENTS Add More

44

Adding a Third or Fourth and Fifth Selective Control Valve (SCV) to your machine can provide enhanced functionality when using hydraulically controlled implements and attachments.

Additional parts may be required for complete setup. OOS denotes Open Operator Station. Please see us for details.

Compact Utility Tractor Additional SCVs

NUMBER DESCRIPTION APPLICATION LIST NOWBLV10838 Third SCV 1E and 1R Series Tractors $ 630.34 $ 598.79

BLV10731 Third SCV Kit w/o Detent 2X20 and 2R Series Tractors $1,178.10 $1,119.19

LVB24845 Third SCV 3X20 Series Tractors $ 352.00 $ 334.39

LVB26030 EH Third SCV, OOS 3320–3720 and 4105 Series $1,255.10 $1,192.29

LVB26031 EH Third SCV, Cab 3320–3720 Series Tractors $1,184.70 $1,125.49

BLV10500 EH Third SCV, OOS MY15 – 3R Series Tractors $ 941.60 $ 894.49

BLV10887 EH Third SCV, Cab MY14 – 3R Series Tractors $1,220.87 $1,159.79

BLV10961 EH Third SCV Open Station – MY14, Cab MY15 – 3R Series Tractors

$ 941.60 $ 894.49

BLV10761 Fourth and Fifth SCV 3X20 and 3R Series Tractors $ 882.20 $ 838.09

LVB25089 Third SCV 4510–4710 Series Tractors $ 327.80 $ 311.39

LVB25513 Third SCV, OOS 4X20 Series Tractors $ 293.70 $ 278.99

LVB26077 Electric Diverter Kit, OOS 4X20 Series Tractors $1,576.30 $1,497.49

LVB26033 EH Third SCV, Cab 4320–4720 Series Tractors $1,184.70 $1,125.49

LVB24855 Flow Diverter Kit 4320–4720 Series Tractors $1,576.30 $1,497.49

LVB26037 Fourth and Fifth SCV, OOS 4X20 Series Tractors $ 908.60 $ 863.19

LVB26072 EH Fourth and Fifth SCV, Cab 4320–4720 Series Tractors $1,455.30 $1,382.49

BLV10764 EH Third SCV, OOS 4M and 4R Series Tractors $1,005.40 $ 955.09

BLV10050 Dual Rear SCV, OOS 4M and 4R Series Tractors $ 918.50 $ 872.59

BLV10763 EH Third SCV, Cab 4R Series Tractors $1,005.40 $ 955.09

BLV10045 Dual Rear SCV, Cab 4R Series Tractors $ 999.90 $ 949.89

Additional SCVs for Utility TractorsNUMBER DESCRIPTION APPLICATION LIST NOWSJ289614 Dual Rear SCV 5103–5403 Tractors $ 809.60 $ 769.09

RE73288 Rear SCV 5105, 5205 Tractors $ 809.60 $ 769.09

BSJ10190 Second Rear SCV 5045D, 5055D, 5045E–5075E Tier 2 Engine Tractors

$ 833.80 $ 792.09

SJ13780 Dual Rear SCV 5083E Limited, 5093E Limited, 5101E Limited Tractors

$2,336.40 $2,219.59

SJ11114 Dual Rear SCV w/Lever 5083E Limited, 5093E Limited, 5101E Limited Tractors

$ 387.20 $ 367.79

RE270429 Triple Rear SCV w/Lever 5083E Limited, 5093E Limited, 5101E Limited Tractors

$1,317.80 $1,251.89

RE248038 Dual Rear SCV 5065M–5115M IT4 Tractors $1,661.25 $1,578.19

RE272024 Triple Rear SCV 5065M–5115M IT4 Tractors $3,693.37 $3,508.69

RE228060 Dual Rear SCV 5225–5625 Tractors $1,618.10 $1,537.19

RE228062 Triple Rear SCV 5225–5625 Tractors $2,336.40 $2,219.59

BSJ10002 Rear SCV 5045E–5075E FT4 Tractors $1,330.79 $1,264.29

BSJ10441 Rear SCV 5075M–5115M, 5100MH Tractors

$1,004.30 $ 954.09

BSJ10110 Dual to Triple Rear SCV 5090E, 5100E, 5100M, 5100MH, 5115M Tractors

$1,004.30 $ 954.09

BSJ10234 4th SCV, Open Center 5090R–5125R Tractors $ 795.30 $ 755.49

BSJ10245 4th SCV, Pressure Flow Compensated

5090R–5125R Tractors $1,101.10 $1,045.99


Add More TRACTOR ATTACHMENTS

Increase illumination while working in dark conditions with these work lights for your compact tractor. From halogen to LED, you can choose the lights that are right for your needs.

Work Light Kits

NUMBER APPLICATION LIST NOWLVB25547 Rear Work Light Kit (1 light) – Fits 1, 2, 3, 4 Series, 5D, and 5E

Series Open Station Tractors$ 66.00 $ 62.69

LVB25546 Forward Lighting Kit (2 lights) – Fits 1, 2, 3, and 4 Series Open Station Tractors

$112.20 $106.59

LVB24853 Rear Work Light Kit (2 lights) – Fits 3000 Twenty, 4000 Twenty, 3R, 4M, and 4R Series Cab Tractors Only

$156.20 $148.39

BLV10497 LED Work Light Kit (2 lights) – 1, 2, 3, and 4 Series Open Station Tractors

$312.40 $296.79

BLV10400 Warning Light Brush Guard Kit – 1023E, 1025R, 2R, 3E, 4M $ 82.50 $ 78.39

BSJ10163 Floodlamp/Work Lights, LED, (4 lights) – Compatible with 5085E, 5100E, 5085M, 5075M, 5090M, 5100M, 5115M, 5100MH Cab Models

$455.40 $432.59

A new seat can bring back the same wonderful feeling you had the first time you sat down on your machine. Whether it is the weather, time, or a tear that is making your seat less than new, you can ride comfortably with a replacement seat from John Deere.

*Check machine serial number for correct parts

Compact Utility Tractor Seats

NUMBER APPLICATION TYPE LIST NOWCH16115 650, 750, 850, 950, 900HC, and 1050 John Deere $ 220.21 $ 193.79

AM107759 655, 755, 756, 855, 856, 955 John Deere $ 174.22 $ 153.29

A-AM107759 655, 755, 756, 855, 856, 955 A&I Products $ 131.95

M805158 670,770, 790, 870,970, 990, 1070, 3005, and 4005

John Deere $ 284.17 $ 250.09

A-M805158 670,770, 790, 870,970, 990, 1070, 3005, and 4005


AM879503 4010, 4100, 4110, and 4115 John Deere $ 258.98 $ 227.89

A-AM879503 4010, 4100, 4110, and 4115 A&I Products $ 186.10

LVA10029 4X00 and 4X10 Series Tractors John Deere $ 116.38 $ 102.39

A-LVA10029 4X00 and 4X10 Series Tractors A&I Products $ 86.43

LVA12909 3X20, 4X10, 4X20, and 3R John Deere $ 385.13 $ 338.89

LVA12330 3320–3720, 4310–4710, 4320–4720, and 3R

John Deere $ 479.24 $ 421.69

LVA19221 3203, 1E, and 3E John Deere $ 170.03 $ 149.59

LVA14067 2210, 2305, 2X20, and 2R John Deere $ 253.10 $ 222.69

LVA19040 Seat Assembly – 4M Series Tractors John Deere $ 197.83 $ 174.09

LVA19041 Seat Assembly – 4R Series Tractors John Deere $1,348.24 $1,186.49

Fuel Protect Benefits include: • Lubricity Improver—prevents injector & fuel pump wear• Cetane Improver—improves combustion; reduces emissions• Reduce biological growth caused by water• Prevents and removes deposits

Tech Tip:To aid in better performance and starting when storing your equipment for extended periods of times and to combat poor quality fuel, consider John Deere Fuel Protect Products.

TY26788Fuel Protect/ Winter Formula

TY26785Fuel Protect/ Summer Formula

ENGINE & REMAN PARTS

46

Here are some examples that make the John Deere OE engine overhaul kits the “Best” choice. John Deere liners are heat-treated to a precise hardness and depth to increase durability and life. Proper heat-treat hardness provides a hard surface with good wear characteristics. Pre-assembled piston liner kits eliminate the chance for broken or improperly installed piston rings, which can cause power loss, oil consumption, and excessive wear, leading to seized pistons and potentially premature engine failure. Fiber-reinforced piston bowl rings provide more than twice the yield strength of aluminum alloy and increase the operating pressure and temperature range without the risk of cracking. John Deere uses two layers of metal alloy on the ID face of the main bearings to protect them from the constant rotational forces of the crankshaft.

John Deere OE Engine Overhaul Kits

*Expanded engine overhaul kits include rod bolts, rod bushings, piston pins, and camshaft bushings.

NUMBER APPLICATION KIT TYPE LIST NOW

RE524374 4010 and 4020 (SN -200999) Expanded Kit* $1,966.58 $1,868.25

RE526966 6605 and 6615–6715 Tractors Standard Kit $1,759.57 $1,671.59RE527299 5210–5510, 5420–5520, and 5325–5525 Standard Kit $1,195.70 $1,135.92

RE524411 4440, 4640, and 4840 Row-Crop Tractors; 8440 and 8450 4WD Tractors; 5720 Forage Harvester; 6620, 6620SH, 7720, and 8820 Combines; and 9940 Cotton Picker

Standard Kit $1,954.51 $1,856.78

RE525437 4440, 4640, and 4840 Row-Crop Tractors; 8440 and 8450 4WD Tractors; 5720 Forage Harvester; 6620, 6620SH, 7720, and 8820 Combines; and 9940 Cotton Picker

Expanded Kit* $2,357.60 $2,239.72

RE524625 4055, 4255, 4455, 4555, 4560, 4755, and 4760 Row-Crop Tractors; 8430, 8440 (572027-), and 8450 4WD Tractors; 5730 Forage Harvester; 8820 Combine; and 9940 and 9950 Cotton Pickers

Standard Kit $2,300.09 $2,185.09

RE526727 8120, 8220, and 8320 Row-Crop Tractors Standard Kit $3,150.91 $2,993.36


Standard Kit $2,686.94 $2,552.59


Expanded Kit* $2,633.63 $2,501.95

RE526726 8420 and 8520 Row-Crop and 9120 4WD Standard Kit $3,043.22 $2,891.06

RE524630 4555–4955, 4560–4960, and 8560–8960 Standard Kit $2,215.09 $2,104.34

RE524636 4555–4955, 4560–4960, and 8560–8960 Expanded Kit* $2,783.12 $2,643.96

RE526971 6010 and 6020 Series Tractors, and 6215–6415 and 3800 Telehandlers

Standard Kit $1,403.06 $1,332.91

Standard Kit: ■ Rod, main, and thrust bearings ■ Thrust washers ■ Oil pan split gasket ■ Factory assembled piston/liner kits ■ Liner packings ■ Front and rear seals ■ Gasket rings ■ Snap rings

Expanded Kit: ■ Standard kit contents ■ Rod bolts and bushings ■ Piston pins ■ Camshaft bushings

If you’re looking for a quality offering at an economical price, we also offer A&I Engine Overhaul kits for John Deere and competitive machines. A&I works with quality suppliers to ensure that all parts included in an A&I engine kit perform and fit as they were meant to. Our engine kits offer: cam ground pistons, ni-resist inserts, spun cast liners, and cylinder components designed as a package. Note: In-Frame Kits typically include Pistons, Liners, Rings, Rod Bearings, & Gaskets and Major Kits typically include Pistons, Liners, Rings, Rod Bearings, Rod Bushings, Rod Capscrews, Cam Bearings, Main Bearings, Thrust Bearings/Washers, Crankshaft Seals, and Gaskets.

A&I Engine Overhaul Kits

NUMBER APPLICATION KIT TYPE LISTA-RE524345 4010 and 4020 (SN -214999) Major Engine $1,689.38

A-RE66093 5410, 5510, 5425, 5425N Major Engine $1,281.55

A-RG18845 4440, 4640, 4840 (SN -253372), 8430, 8440, 8450 (SN -253372)

Major Engine $1,575.11

A-RE64212 4055–4755, 4560, 4760, 8570 (SN 568445-), 8100–8300 (6076 engine)


A-RG17892 4320, 4430, 4630 Tractors; 6600 and 7700 Combine (SN 335845-)


A-RE66094 6110–6410, 6120–6420, 6405 and 6605 Tractors Major Engine $1,333.87

A-OK504201 7710–7810 (SN -089999), 8100–8400 (6081 engine), 8110–8410 Tractors



REPAIR LEVEL DESCRIPTION LIST

Evaluation Charge For all components listed below, the cost to evaluate the repair will only be charged when component can not be repaired, or if customer decides not to complete the recommended repairs.

See Us

Starfire 3000

Primary Inspection and Repair Replace damaged dome and base housing with original-equipment John Deere dome and housing. Includes light pipe and decals. Unit will be fully functionally tested.

$775.00

Comprehensive Inspection and Repair Repair all points of failure to hardware within the SF3000 receiver. John Deere original equipment testing, processes, and procedures used to bring SF3000 back to like new condition. Includes electronic components, connectors, cables and solder reflow.

$975.00

*All Repairs Include new Dome and new Lower Housing

Greenstar 1800 Display

Complete Repair Repair all hardware failure points within the 1800 Display. John Deere original equipment testing, processes, and procedures used to bring 1800 Display back to like new condition. Includes electronic components, connectors, audio alarm, housings, and solder reflow.

$475.00


Complete Repair Repair all hardware failure points within the 2600 Display. John Deere original equipment testing, processes, and procedures used to bring 2600 Display back to like new condition. Includes electronic components, connectors, membrane switch, card reader, audio alarm, touchscreen replacement, housing, and calibration.

$620.00


Complete Repair Repair all hardware failure points within the 2630 Display. John Deere original equipment testing, processes, and procedures used to bring 2630 Display back to like new condition. Includes electronic components, connectors, membrane switch, USB cover, audio alarm rear housing, air-gap LCD touchscreen with front housing and bezel assembly, and calibration.

$870.00

Brand New. All For You.Introducing Electronics Repair & Return from John DeereSkilled technicians. Quick turnaround. Competitive pricing. It’s what you need when electronics go on the fritz and what you get from Electronics Repair & Return by John Deere Reman.Now available, this convenient service offers you a true John Deere solution for the OEM repair of some of your most important electronic components. And better yet, it’s all backed by a valuable 12-month Limited Warranty** that’s sure to please.Turn to John Deere for electronics repair and be rewarded with fast, reliable service to get your machine up to speed again.

GreenStar™ 3 Display 2630 StarFire™ 3000GreenStar™ 2 Display 2600 GreenStar™ 1800 Display

** The John Deere Reman Electronic Repair & Return 12-month Limited Warranty covers specific repairs on each component as noted on the Service Repair Card received with repaired unit. John Deere Reman will repair or replace unit during the applicable warranty period but is not responsible for any labor costs associated with the removal and installation of the components.

48

Add More ProductivitySpecific crop conditions — Abrasive (Peanut Hay and Cornstalks)

Talk to us today about how attachments can help you Do More with your baler.

Cornstalk Compression Rack

Push Bar

Cornstalk Compression RackFeed tough, abrasive cornstalk windrows into your baler with greater ease while protecting your equipment. This hardworking rack contains a solid steel shaft that’s heavy enough to help compact stalks and leaves against the pickup. For use with cornstalks on 5-foot MegaWide™ Plus Pickup. Change out when baling other crops.

BE32257 558, 559, 568, 569, 550M/R,

MegaWide Plus Pickup or HC2 Pickup required

Side-sheet Enhancement Protect your round baler where you need it most — inside the walls. Made with rugged carbon-manganese steel that withstands extremely abrasive crop and field conditions, it delivers a dramatic increase in your baler’s service life.

BE32101 468, 469, 568, 569, 460M/R, and 560M/R


1 Push Bar Now you don’t have to back up to eject bales. With two long spring-loaded arms and a center bar, this baler bar pushes each bale rearward with a positive force to ensure clearance for closing the gate.

BE32556 567, 568, 569, and 560M/R BE32555

2

3

3

2

1

Side-sheet Enhancement

BUY NOW, PAY LATERWhen you put it on your

multi-use account. Ask us for details!

John Deere Round Baler attachments

BE32141 467 and 567

467, 468, 469, and 460M/R and 560M/R

*Offer valid July 1, 2019–September 30, 2019. Receive 10% off of select John Deere Round Baler attachments, to be applied to the total before applicable taxes, shipping rates, and delivery charges. Standard shipping rates only. Redeemable at participating John Deere dealers in the U.S. and Canada and online at JDParts.com. If redeeming online at JDParts.com, enter coupon code “75687” at checkout to receive 10% off of a qualifying John Deere Round Baler attachment purchase. Qualifying attachments include Side Sheet Enhancement (part numbers BE32101 and BE32141), Corn Cob Filler Plates (part number BE32310), Corn Stalk Compression Rack (part number BE32257), and DiamondTough™ Pro Baler Belts (part numbers AFH210848, AFH212598, AFH210849, and AFH212599).

OFF Select John Deere Round Baler Attachments.*10%

Attachments

Corncob Filler PlatesKeep threshed corncobs moving smoothly into the baler without snags. These plates also help to eliminate tooth breakage from cobs or other material that gets caught between the pickup strippers. Available for MegaWide™ Plus Pickups, these plates will improve pickup tooth and rotor tine reliability.BE32310


Variable-Core Valve KitControl hydraulic pressure for easier starts, even in difficult conditions. Reduces core density to your preference.BE32298 BE24159 457, 458, 459, 557, 558, 559, 450M, and 550M BE23827

*Available only for machines ordered with option 5050-Electirc Tie for BE32298 only

DiamondTough™ Pro Baler Belts Most wear- and tear-resistant belt in the industry. Provides greater performance, increased uptime and reduced cost of operation in tough baling conditions.

Short: AFH210848 469, 569, 460M/R, and 560M/R Short: AFH212598 459, 459E, 559, 450E/M, and 550M Long: AFH210849 469, 569, 460M/R, and 560M/R Long: AFH212599 459, 459E, 559, 450E/M, and 550M

Add More Productivitywith John Deere Round Baler Crop-Specific attachmentsCrop Conditions—Abrasive (Peanut Hay and Cornstalks)

7, 8, 9, and Zero Series

459* and 450E

467, 468, 469, 567, 568, 569, 460M, and 560M


HAY & FORAGE PARTS

5050

This newly advanced Hay, Straw, and Silage Tester is the most efficient probe on the market. The 20" stainless steel probe and tip provides accuracy, versatility, and durability. The SW07305 will measure push force to determine whether it’s a high- or low-density bale, then adjusts the moisture result for more precise accuracy.Features:■ Measures 8–72% moisture content ■ Temperature range 32–185°F (0–85°C) ■ Automatic Density Compensation ■ Choice of hay or straw bales, separate mode for silage ■ Memory can store results up to 64 bales with a total of 1,000 savable moisture and

temperature readings■ Continuous reading as you probe bale

Advanced Hay, Straw, and Silage Tester


SW007305 Hay, Straw, and Silage Tester $340.95 $320.49

Hay Probes and Baler Mounted TestersNUMBER DESCRIPTION LIST NOW

Handheld Moisture Testers:

Moisture Testers:

SW16136 18-in. Probe (testing range from 14–44%) $205.72 $193.38


Low-Moisture:


SW007321 10-in. Probe (testing range from 8–44%) $230.48 $216.65Baler-Mounted Hay Testers:

SW07350 Tester mounts inside the baler for direct readout of moisture while baling (testing range from 8–44%)

$312.39 $293.65

SW007360 Advanced Baler-Mounted Hay Moisture Tester (BHT-2) $432.39 $406.45

NEW!

Developed by farmer for farmers. The Hay Core Sampler ensures fast and contamination-free sampling from hay bales for testing purposes.Features: ■ Sampling depth is 20"■ Sampler can be used with either a 3/8" or 1/2" drill. 1/2" recommended for best results■ The inside diameter of the shaft is 7/8" allowing samples to stay loose for easy

bagging with the cleanout rod between samplings■ Includes cleanout rod for pushing hay into provided zip-lock sample bag■ Shaft and connections are made of stainless steel■ Replaceable core sampler tip

Hay Core Sampler


SW007390 Hay Core Sampler $181.63 $170.73

NEW!

JDParts.JohnDeere.com Cot-1

All John Deere spindles are manufactured in John Deere facilities utilizing next-generation heat treat controls to create the most consistent heat-treated spindles on the market. Plus, 25 unique quality checks at 7 manufacturing points ensure the highest quality product.

For average annual usage and picking conditions, the John Deere PRO Series Spindles offer a reliable value-priced option. For higher annual usage or harsh picking conditions, Pro-XL™ Spindles offer up to 50 percent longer life than the John Deere PRO Series Spindles.

Individual spindles and convenient spindle assemblies are now available for both PRO and Pro-XL spindles … take your pick.

Take Your Pick

■ John Deere controls the entire manufacturing process including heat treatment, chroming, and quality inspections

■ A unique data matrix on each spindle ensures quality control, consistency, and traceability

■ Three sets of 12 barbs per flute for efficient picking■ Case hardening ensures the spindles will break and not bend when striking solid

objects to minimize damage to the picking units■ Chrome-nickel plating for long life

Spindles

NUMBER STYLE APPLICATION LIST NOW

PRO:

KK40195 Right-hand All John Deere cotton pickers $4.77 $4.39

N190333 Left-hand All John Deere cotton pickers $5.57 $5.09

PRO-XL:

KK28390 Right-hand All John Deere cotton pickers $5.32 $4.89

Replacing worn spindles cuts the chance of stripping drive gears and damaging the picker bar. Reduce downtime by using the all-in-one, factory-made spindle assembly.

Spindle Assembly


PRO:

AKK24309 Right-hand All John Deere cotton pickers $7.68 $7.09

PRO-XL:

AKK18840 Right-hand All John Deere cotton pickers $8.52 $7.79

COTTON HARVESTING PARTS

Cot-2

Save time with ready-to-use, spindle-nut assemblies. No more need to press the bushings into the nut.

Spindle-Nut Assembly


AN111948 Right-hand All John Deere cotton pickers $4.27 $3.89

AN111949 Left-hand All John Deere cotton pickers $4.31 $3.99

Even the smallest parts of your cotton picker are designed to the highest quality standards.

Spindle Drive Components

NUMBER STYLE APPLICATION LIST NOWL2456N Bevel Drive Gear All John Deere cotton pickers

(except 9970, 9986, 9996, 7660, 7760, and CP690)

$ 3.40 $ 3.09

N371626 Bevel Drive Gear 9970, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 3.42 $ 3.09

JD8804 Needle Bearing All John Deere cotton pickers $ 1.33 $ 1.19N278037 Shaft for 18 Spindles All John Deere cotton pickers

(except 9970, 9986, 9996, 7660, 7760, and CP690)

$36.25 $33.39

N371720 Shaft for 18 Spindles 9970, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$36.61 $33.69

N275212 Shaft for 20 Spindles 9965 and 9976 cotton pickers $44.25 $40.69N371572 Shaft for 20 Spindles 9986, 9996, 7660, 7760, and

CP690 cotton pickers$44.93 $41.29

N118289 14T Gear All John Deere cotton pickers $10.54 $ 9.69

John Deere cotton pickers use hardened spindles with razor-sharp barbs rotating at high rpm. But these spindles don’t work in isolation. When needed, replace the driveshaft assembly with a factory-assembled shaft.

Spindle Driveshaft Assembly

NUMBER DESCRIPTION APPLICATION LIST NOWAN276743 18 Spindle, PRO-SERIES™ 9970 cotton pickers and

PRO-12 VRS$165.16 $151.89

AN276737 20 Spindle 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$212.09 $195.09

Even a bit of wear or a tiny bend reduces performance. That’s why John Deere offers precisely machined components for precision performance, longer life, quick field replacement, reduced downtime, and smooth and quiet operation.

Picker Bars and Assemblies

NUMBER DESCRIPTION APPLICATION LIST NOW

Bar Assembly:

AN276740 18 Spindle 9970 cotton pickers and PRO-12 VRS

$ 994.31 $914.79

AN276734 20 Spindle 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$1,000.82 $920.79

Bar with Bushing and Sleeve:

AN274501 Right-hand 9970 cotton pickers $ 162.45 $149.49

AN273434 Right-hand 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 165.72 $152.49


Cot-3JDParts.JohnDeere.com

John Deere urethane doffers greatly reduce contamination and offer increased wear life. They’re specially designed for balanced, smooth operation—even at high speeds. Our doffers are precision engineered to reduce the need for grinding or shimming and are heat- and oil-resistant. Save time with ready-to-install doffer assemblies straight from the factory!

Doffers, Doffer Parts, and Doffer Assemblies

NUMBER DESCRIPTION MODEL LIST NOWAN406038 Urethane Doffer CP690 cotton pickers

(hollow-core shaft)$ 12.63 $ 11.59

AN272152 Urethane Doffer Cotton pickers including 9986, 9996, 7660, and 7760 (solid shaft)

$ 12.30 $ 11.29

AN273953 Column Housing All John Deere cotton pickers $ 68.82 $ 63.29JD10123 Shaft Ball Bearing John Deere cotton pickers

(except 9970, 9976, 9986, 9996, 7660, 7760, and CP690)

$ 17.75 $ 16.29

L3197N Shim All John Deere cotton pickers $ 0.67 $ 0.59

Assembly with Urethane Doffers:

AN274508 Doffer Assembly Pro 12 and Pro 12 VRS row units

$708.24 $651.59

AKK17562 Doffer Assembly Cotton pickers including 9986, 9996, 7660, 7760, and CP690 (Pro-16 row units)

$774.06 $712.09

These specially designed pads feature an X pattern to ensure proper moisture distribution on picking spindles operating in all types of conditions. Precise fins provide an even flow of cleaner from the pad to the spindle, ensuring optimum picking performance. Pads are made of long-lasting urethane. A tight fit keeps debris from plugging the moistener system or tearing the pad off during harvest.

Moistener Pads


N275607 Urethane Moistener Pad $2.72 $2.49

Our pressure plates, pressure plate extensions, and scrapping plates provide a profile that will keep the cotton plant in the picking zone longer, giving the spindle more opportunity to harvest the cotton off the plant.

Pressure and Scrapping Plates

NUMBER DESCRIPTION APPLICATION LIST NOWPressure Doors:

AN279557 Pressure Door, PRO-12™ Units, Front and Rear (2 per row)

9970 cotton pickers and PRO-12 VRS

$350.33 $322.29

AN279558 Pressure Door, PRO-16™ Units, Front (1 per row)

9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$384.54 $353.79

Pressure Plate Extensions:

N278127 Extension, Pressure Plate, PRO-12 (2 per row)

9970 cotton pickers and PRO-12 VRS

$ 63.53 $ 58.39

N274103 Extension, Pressure Plate, PRO-16 (2 per row)

9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 65.30 $ 60.09

Scrapping Plates:

N372970 Scrapping Plate (10 spindle), PRO-12 (2 per row), PRO-16 (4 per row)

9970, 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 70.31 $ 64.69

N372971 Scrapping Plate (4 spindle), PRO-12 (4 per row)

9970, 7660, 7760, and CP690 cotton pickers and PRO-12 VRS

$ 44.55 $ 40.99


Cot-4

Replace with genuine John Deere quality and ask us about low-cost installation.

Drum and Head Parts


JD8823 Lower 9965 cotton picker $20.37 $18.69JD9323 Spindle Drive Bearing, Lower All Pro Series row units,

including 9986, 9996, 7660, 7760, and CP690)

$25.43 $23.39

JD9324 Upper 9965, 9970, 9976, 9986, 9996, 7660, 7760, and CP690 cotton pickers

$ 6.91 $ 6.39

AN190474 Drum Seal, Lower All John Deere cotton pickers $16.01 $14.69N377420 Height-Sensing Shoe All Pro Series row units,

including 9986, 9996, 7660, 7760, and CP690

$23.06 $21.19

N112291 Picker Bar, Pivot All John Deere cotton pickers $ 5.34 $ 4.89

Essential lubricantsJohn Deere Spindle Cleaner and Grease boost your harvesting performance and reduce your operating and maintenance costs.

■ Spindle Cleaner Spindle Cleaner protects your cotton picker’s mechanical parts from rust, oxidation,

and corrosion—yet it won’t wash spindle grease off bushings and attachments.

■ Spindle Grease John Deere Spindle Grease is an all-in-one, lithium-based lubricating grease, gear

lubricant, penetrating oil, and corrosion protector. It reduces the amount of wear from metal-to-metal contact in your picker head, and it extends the service life of high-wear parts.

Call us today to learn more.

Spindle Grease and CleanerNUMBER DESCRIPTION

Spindle Grease

AN113719 30-lb.

AN31360 120-lb.

TY25845 2,000-lb.

Spindle Cleaner

AN114022 5 Gallon

AN114023 55 Gallon

See us for pricing.

TRANSMISSIONLube Pump FilterLVA10419Replace every 400 hours.

HYDRAULICSSpin-On FilterLVA10419 (P.I.N. -39000)AH128449 (P.I.N. 39001-)Replace every 400 hours.

HYDRAULICSPump Drive Gearbox FilterLVA10419Replace initially after 100 hours, then every 400 hours.

CABFresh Air FilterAH115833Clean or replace every 100 hours or as required.

HYDRAULICSPrimary Hydraulic FilterRE210857Replace every 400 hours.

PICKING UNITLubrication System FiltersAN192848Replace (2) every 250 hours.

HYDRAULICSPropel System FilterAN373366Replace every 400 hours.

ENGINEOil FilterRE572785Replace after first 100 hours, then every 250 hours. If Plus-50™ oil is used, along with a John Deere oil filter, the oil change interval may be extended by 50 percent. For example, 250 hours extends to 375 hours.

ENGINEPrimary Air FilterAH212294 (P.I.N. -39000)AH222225 (P.I.N. 39001-)Replace every year and as required.

ENGINESecondary Air FilterAH212295Replace every year and as required.

CABRecirculation Air FilterH220870Clean or replace every 200 hours or as required.

TIER 2 AND 3 ENGINEPrimary Fuel FilterRE532952Secondary Fuel FilterRE533910Replace every 400 hours.

iT4 ENGINEPrimary Fuel FilterRE539465Secondary Fuel FilterRE533910

HYDRAULICSUnit Drive FilterAH128449Replace every 400 hours.

7760 Cotton PickerFilter Overview with Service Intervals

Visit www.JohnDeere.com/FilterOverviews to find the filter guide for your model. Cot-5

Cot-6

COTTON HARVESTING ATTACHMENTS Do MoreAdd More

Scrapping plates boost harvest efficiency by pushing cotton further into the spindle picking zone.

Scrapping Plates

NUMBER MODEL LIST NOW

BN272408 PRO-16 Units $301.40 $277.29

Vine cutters help slice through vines and weeds, preventing them from plugging row units.

Vine Cutters


BN272178 PRO-12, PRO-16, VRS Units $319.00 $293.49

Stalklifter rods allow you to harvest low-hanging bolls more easily by improving the row unit’s lifting action.

Stalklifter Rods


BN272534 PRO-12, PRO-16, VRS Units $394.90 $363.29

On 7760 and CP690 cotton pickers prior to MY16, the gate latch hook end can wear to a point where the gate will not latch or will unlatch during module formation. The gate latch wear plate provides heat-treated hardened plates and a mounting plate which welds over the hook. These plates provide replaceable wear surfaces which provide longer wear at the critical latch point.

Gate Latch Wear Plate Kit


AKK21134 7760, CP690, CS690 $132.96 $122.29

Proper adjustment of the cotton feeder belt is critical for performance and reliability of the round module cotton harvester. If the feeder belt tension is set too loose, the belt can slip. If it is set too tight, damage to the lace and/or belt can occur. The spring tension feeder belt kit makes it easier to properly set the feeder belt tension during machine operation.

Spring Tension Feeder Belt Kit


AKK21021 7760, CP690, CS690 $3,728.93 $3,430.59

The CP690 offers an optional active rotating belt cleaning brush that provides improved RMB belt cleaning in tougher, higher-moisture harvesting conditions.

Active RMB Belt Cleaning Brush


BKK10319 CP690, CS690 $2,971.10 $2,733.39

Mud scrapers may be installed to help clean drive tires in muddy conditions.

Mud Scrapers


KK24399 7760, CP690, CS690 $303.04 $278.79

KK24400 7760, CP690, CS690 $316.49 $291.19

N380682 7760, CP690, CS690 $ 69.09 $ 63.59

N380870 7760, CP690, CS690 $213.36 $196.29


Cot-7JDParts.JohnDeere.com

Worn bats and brushes leave more cotton in the field and less in your module. To ensure peak harvesting efficiency, you’ll want to monitor their condition and replace worn components. John Deere cotton stripper bats and brushes are manufactured from the highest quality raw materials. Their steel channels are electro-galvanized to prevent rust. Finally, products are thoroughly inspected to ensure quality.

Cotton Stripper Bats and Brushes

NUMBER DESCRIPTION LENGTH LIST NOW

Bats

AN123046 1-Ply Bat 40" $12.36 $ 9.29

AN122821 1-Ply Bat 40" $ 9.65 $ 8.89

Row Unit Brushes

AN50702 Stripper Brush 10" $ 2.35 $ 1.99



AN220018 Mud Brush 40" $ 7.85 $ 7.19

Cleaner Brushes

AN221023 Doffer Brush – 2" Trim 59.25" $12.81 $10.89

AN221813 Doffer Brush – 17/8" Trim 59.25" $12.19 $10.99AN221683 Notched Reclaimer

(landlord brush)59.375" $37.56 $28.19

AN123628 3" Burr Reclaimer 59.5" $41.28 $37.19

AN123721 Doffer Brush 59.5" $10.16 $ 9.29

AN220747 Burr Reclaimer (fire brush) 59.5" $37.56 $28.19

AKK11599 Brush CS690 Cleaner Air Duct 11" $ 2.35 $ 2.19

AKK11600 Brush CS690 Cleaner Air Brush 20" $ 6.19 $ 5.69

Whiskers

AN122263 Cat Whisker 9" $ 4.45 $ 4.09

AN221395 Cat Whisker w/o Notches 9" $ 4.39 $ 3.99

AN123821 Cat Whisker 22" $12.12 $ 9.09

AN273317 Cat Whisker w/o Notches 37.5" $15.25 $13.99

AN220022 Cat Whisker w/o Notches 48" $24.71 $22.69

AN221228 Cat Whisker w/o Notches 52" $29.33 $26.99

John Deere saw blades feature a consistent tooth profile spacing for even cleaning and rugged performance. Saw blades are heat-treated for excellent tooth rigidity and long life.

Cotton Stripper Saw Blades and Drums


Saw Blades

N221590 Regular Tooth $ 4.17 $3.79

PMF969534 Regular Tooth $ 1.68

PMBCS705 Deep Tooth $ 1.68

Complete Saw Drum Assembly

AN220732 7445, 7450, 7455, 7460 $1,714.81

AN405199 CS690 $1,714.81

CABRecirculation Air FilterL155288Clean or replace as required.

ENGINEDiesel Exhaust Fluid (DEF) Tank Header Suction FilterDZ103739Replace as indicated by DiagnosticTrouble Code.

ENGINECoolant FilterREC405896500 (8700–8800)Replace every 250 hours.

HYDRAULICS (ProDrive™ only)Oil FilterAXE27449Replace after the first 100 hours, then every 1,000 hours and as indicated by Diagnostic Trouble Code.

ENGINEDiesel Exhaust Fluid (DEF) Tank Vent FilterH216169Replace after the first year, then every 4,500 hours or three years, whichever occurs first.

ENGINESecondary Air CleanerHXE43546 (8100–8200)HXE60967 (8300–8600)AZ104111 (8700–8800)Replace with each primary air cleaner change.

ENGINEOil FilterRE509672 (8100–8200)RE572785 (8300–8600)RE574468 (8700–8800) – Qty. 2Replace after initial 100 hours, then every 250 hours.If Plus-50™ II oil is used, interval may be extended to 500 hours.

ENGINEFuel FilterRE539465 & RE533910 (8100–8600)RECFS1976300 (8700–8800)RECFF0578200 (8700–8800) – Qty. 2Replace every 500 hours and as indicated by Diagnostic Trouble Code.

HYDRAULICSPower Distribution Gear Oil FilterAXE27449Replace after the first 100 hours, then every 1,000 hours and as indicated by Diagnostic Trouble Code.

ENGINEDiesel Exhaust Fluid (DEF) Dosing Unit FilterRE554498Replace after the first year, then every4,500 hours or three years, whichever occurs first.

HYDRAULICSHydraulic Reservoir Oil FilterAXE27447Replace every 1,000 hours or two years, whichever occurs first, and as indicated by Diagnostic Trouble Code.

ENGINEPrimary Air CleanerHXE43545 (8100–8200)HXE60966 (8300–8600)AZ104110 (8700–8800)Clean as required (up to six times). Replace every 1,500 hours.

CABFresh Air FilterRE284091Clean or replace as required.

8000 Final Tier 4 (FT4) Series Self-Propelled Forage Harvesters – 8100, 8200, 8300, 8400, 8500, 8600, 8700, 8800Filter Overview with Service Intervals

Visit www.JohnDeere.com/FilterOverviews to find the filter guide for your model. FH-1

One shearbar. Every crop.Dura Line™ Plus from John Deere

It’s a fact: the less time you spend replacing parts, the more time you have in the field. And now there’s a longer-lasting solution for your most frequently replaced part—shearbars.

John Deere Dura Line Plus shearbars set a new standard for wear resistance thanks to their high-tech factory coating that fuses a chrome-carbide layer to base metal parts at 2,462°F.

Dura Line Plus shearbars offer: ■ Real ALL-CROP capability ■ Three times the wear life of standard shearbars ■ Minimal shear gap to keep fuel consumption constant ■ Factory-fitted or aftermarket retrofitted options

Learn how new Dura Line Plus shearbars can keep you productive in the field longer. Talk to us today.

FH-2

Cutterhead knives: Why ours last longer

The cutterhead plays a critical role in forage harvester performance. Which is why it’s so important to choose knives that fit, perform, and last. John Deere cutterhead knives do all that. And they’re manufactured specifically for your John Deere forage harvester.

Highlights: Sandblasted surface ensures precise clamping forces Induction-hardened cutting zone provides long-lasting sharpness Tough body minimizes risk of breakage Extended knife body supports retraction in case of impact with an object Trademarks identify the genuine John Deere knife

A

B

C

D

E

How to identify low-quality knife coatingsAt a glance, most knives look very similar. But take a look at the knife coatings on the right—the real difference is on the bottom where the hard-facing is bonded to the knife body.

Hard-working, longer-lasting John Deere cutterhead knives keep you in the field until harvest is done. Talk to us today about your specific cutterhead needs.

BC

D E

A

John Deere

Knife is 3/4 worn, but coating remains intact.

Competitor #1

Coating is flaking due to bonding failures.

Competitor #2

Premature wear is due to low carbide content.

Helpful HintTo examine knives mounted on a drum, use a small, handheld mirror to look under the knife surface.

One shearbar. Every crop.Dura Line™ Plus from John Deere

It’s a fact: the less time you spend replacing parts, the more time you have in the field. And now there’s a longer-lasting solution for your most frequently replaced part—shearbars.

John Deere Dura Line Plus shearbars set a new standard for wear resistance thanks to their high-tech factory coating that fuses a chrome-carbide layer to base metal parts at 2,462°F.

Dura Line Plus shearbars offer: ■ Real ALL-CROP capability ■ Three times the wear life of standard shearbars ■ Minimal shear gap to keep fuel consumption constant ■ Factory-fitted or aftermarket retrofitted options

Learn how new Dura Line Plus shearbars can keep you productive in the field longer. Talk to us today.

FORAGE HARVESTER PARTS

Cutterhead KnivesNUMBER DESCRIPTION APPLICATION LIST NOWZ63136 Corn 6000 Series, 7200–7500,

7250–7550, and 7180–7580$23.27 $21.39

Z72500 Corn 7700–7800, 7750–7950, and 7780–7980 Series

$27.40 $25.19

Z62075 Corn, Angled, Right-hand 6000 Series, 7200–7500, 7250–7550, and 7180–7580

$30.06 $27.69

Z62076 Corn, Angled, Left-hand 6000 Series, 7200–7500, 7250–7550, and 7180–7580

$30.06 $27.69

Z69500 Grass 6000 Series, 7200–7500, 7250–7550, and 7180–7580

$21.06 $19.39

Z81123 Grass 7700–7800, 7750–7950, and 7780–7980 Series

$25.58 $23.49

HXE53570 Corn 8100, 8200, 8300, 8400, and 8500

$30.42 $27.99

HXE52950 Corn 8600, 8700, and 8800 $36.52 $33.59

HXE53568 Grass 8100, 8200, 8300, 8400, and 8500

$28.28 $25.99

HXE52933 Grass 8600, 8700, and 8800 $32.43 $29.79

RUN UP THE SCORE WITH XSTREAM™ KPPut your forage harvester into better scoring position with the XStream Kernel Processor from John Deere. No matter the length of cut, you’ll get high corn silage processing scores with XStream KP thanks to 10-inch diameter rolls and 50 percent speed differential that provide consistently smashed kernels and thoroughly processed plant material.

Manufactured in partnership with Scherer Inc., the XStream KP also features a quick-exchange system and pressurized oil lubrication along with your choice of Dura Line sawtooth rolls, XCut rolls or whole crop XCut rolls. Score big with XStream KP.

Ask us about XStream KP today.

XStream Kernel Processor

AVAILABLE FOR 9000 SERIES AS WELL AS 8300-8600 SELF-PROPELLED FORAGE HARVESTERS

FORAGE HARVESTER PARTS

FH-4FH-4

Genuine John Deere ShearbarsNUMBER DESCRIPTION APPLICATION LIST NOWKIT – Stationary Knife with Bearings:

AXE37631 Dura Line™ Plus Shear Bar 7200–7500, 7250–7550, and 7180–7580

$1,687.94 $1,552.89

AXE37632 Dura Line Plus Shear Bar 7700–7800, 7750–7950, and 7780–7980

$1,994.84 $1,835.29

AZ47614 Corn 6000 Series $ 557.37 $ 512.79AZ53906 Corn, Raised 6000 Series, 7200–7500, and

7250–7550$ 562.64 $ 517.59

AZ64735 Corn, Raised 7700–7800 and 7750–7950 Series

$ 664.94 $ 611.69

AZ103105 Grass 6000 Series $ 570.36 $ 524.69AZ103112 Grass, Raised 6000 Series, 7200–7500,

and 7250–7550$ 562.64 $ 517.59

AZ103113 Grass, Raised 7700–7800 and 7750–7950 $ 664.94 $ 611.69

AZ50122 Corn and Grass, Heavy-duty 6000 Series $ 804.39 $ 739.99AZ57685 Corn and Grass, Heavy-duty,

Raised 6000 Series, 7200–7500, and 7250–7550 Series

$1,160.19 $1,067.39

AZ64737 Stationary Knife, Corn and Grass, Heavy-duty, Raised

7700–7800 and 7750–7950 Series

$1,440.25 $1,324.99

Straps:

Z49449 Strap 6000 Series, 7200–7500, 7250–7550, and 7180–7580 Series

$ 102.91 $ 94.69

Z72486 Strap 7700–7800, 7750–7950, and 7780–7980 Series

$ 150.82 $ 138.79

Perfect for reducing buildup on the feedroll frame and kernel processor. Also makes it easier to clean the machine at the end of the day.

Anti-Debris Roller Curtain


BZ100189 7050 and 7080 Series $798.60 $734.69

Designed for the rear storage compartment on the 8000 series, this accordion-style toolbox features multiple compartments and easy-to-carry handles. The SPFH toolbox may also be used in other applications. Note: Tools not included.

SPFH Toolbox

NUMBER APPLICATION LIST

FH330251 8000 Series $107.41

FH-6

Kernel Processor RollsNUMBER DESCRIPTION APPLICATION LIST NOW

Standard Triangle:

AZ102631 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,483.34 $1,364.69

AZ102632 2 Needed 7700–7800, 7750–7950, 7780–7980 $1,739.09 $1,599.99

AXE43638 2 Needed 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,563.99

AXE43491 2 Needed 8600, 8700, 8800 $1,800.00 $1,655.99

Saw Tooth Standard:

AZ101800 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,483.34 $1,364.69

AZ102602 2 Needed 7700–7800, 7750–7950, 7780–7980 $1,739.09 $1,599.99

AXE43571 Front Roll 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,563.99

AXE43572 Rear Roll 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,563.99

AXE43163 Front Roll 8600, 8700, 8800 $1,841.39 $1,694.09

AXE43182 Rear Roll 8600, 8700, 8800 $1,841.39 $1,694.09

Saw Tooth Chrome:

AZ101376 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,994.84 $1,835.29

AZ101377 2 Needed 7700–7800, 7750–7950, 7780–7980 $2,455.19 $2,258.79

AXE43639 Front Roll 8100, 8200, 8300, 8400, 8500 $2,455.19 $2,258.79

AXE43640 Rear Roll 8100, 8200, 8300, 8400, 8500 $2,400.00 $2,207.99

AXE43492 Front Roll 8600, 8700, 8800 $2,608.64 $2,399.89

AXE43493 Rear Roll 8600, 8700, 8800 $2,608.64 $2,399.89

32% Saw Tooth Chrome (Rear Roll Reversed):

AXE43639 2 Needed 8100, 8200, 8300, 8400, 8500 $2,455.19 $2,258.79

AXE43492 2 Needed 8600, 8700, 8800 $2,608.64 $2,399.89

Saw Tooth Whole Crop:

AZ102633 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,483.34 $1,364.69

AXE43641 Front Roll 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,563.99

AXE43642 Rear Roll 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,563.99

AXE43494 Front Roll 8600, 8700, 8800 $1,841.39 $1,694.09

AXE43495 Rear Roll 8600, 8700, 8800 $1,841.39 $1,694.09

Triangle Milo/Sorghum:

AZ54513 2 Needed 7200–7500, 7250–7550, 7180–7580 $1,450.00 $1,333.99

AXE43643 2 Needed 8100, 8200, 8300, 8400, 8500 $1,700.00 $1,563.99

AXE43496 2 Needed 8600, 8700, 8800 $1,800.00 $1,655.99

Kernel Processor Rolls

Cutting section

Type Standard Saw Tooth Standard Saw Tooth Chrome Saw Tooth Whole Crop Triangle Milo

Application Standard corn condition Corn – provides higher aggressiveness

Corn – provides increased lifetime due to the hard chroming

All whole crop application

Alkalage and milo

Gap Recommendation 2.5–3mm 2.5–3mm 2.5–3mm 0.5–1mm 0.5–1mm

Different Speed 21% 21% 21% 32% 32%

The John Deere kernel processor is induction-hardened rather than flame-hardened, like many competitors’ rolls. What does that mean to you? Hardening is much more consistent, resulting in a longer life and fewer repair costs. The hardening zones of a John Deere roll are shown in the illustration to the right.

3

2

4

5 6

1

1. Corn header Use an air compressor to blow off major buildups of debris and residue, then wash thoroughly with a power washer.

2. Blades For fast, efficient harvesting, sharp blades are a must. Check the blades and scrapers, and replace any that are bent, damaged, or worn.

3. Worn points If you notice teeth are blunt or damaged, replace with new points. Points must be installed in pairs on opposite sides of the drum. Refer to your operator’s manual for detailed instructions.

4. Scrapers You’ll get better results when you have sharp scrapers. Check scrapers and replace any that are damaged or missing on the rotor cleaning drums. Also, check the bolts to make sure they’re tight.

5. Gathering drums Inspect the teeth on the gathering drums. Make sure teeth are sharp to ensure smooth crop flow.

6. High-performance scrapers With the convenient bolt-on design, you can use each side of the scraper so you’ll have fewer maintenance costs.

Corn Headers

FH-7JDParts.JohnDeere.com

3

2

4

5 6

1

1. Corn header Use an air compressor to blow off major buildups of debris and residue, then wash thoroughly with a power washer.

2. Blades For fast, efficient harvesting, sharp blades are a must. Check the blades and scrapers, and replace any that are bent, damaged, or worn.

3. Worn points If you notice teeth are blunt or damaged, replace with new points. Points must be installed in pairs on opposite sides of the drum. Refer to your operator’s manual for detailed instructions.

4. Scrapers You’ll get better results when you have sharp scrapers. Check scrapers and replace any that are damaged or missing on the rotor cleaning drums. Also, check the bolts to make sure they’re tight.

5. Gathering drums Inspect the teeth on the gathering drums. Make sure teeth are sharp to ensure smooth crop flow.

6. High-performance scrapers With the convenient bolt-on design, you can use each side of the scraper so you’ll have fewer maintenance costs.

Corn Headers

With a specially bonded coating along the cutting edge and rugged tungsten- carbide construction, these knives deliver exceptional cutting, acre after acre.

Rotary Harvesting Unit Parts

NUMBER DESCRIPTION APPLICATION LIST NOWKnives:

LCA79040 Tungsten-coated Knives, Cleaners, and Hardware

684, 686, 688, and 710 $ 564.52 $ 519.39

LCA109994 Small Drum Service Kit 676 $ 440.09 $ 404.89

LCA109995 Big Drum Service Kit 676 $ 749.33 $ 689.39LCA89940 Tungsten-coated Knives,

Cleaners, and Hardware678 $1,039.60 $ 956.39

LCA78553 Non-coated Knives for Two Drums

684, 686, 688, and 710 $ 390.70 $ 359.39

LCA95957 Knife – Non-coated 684, 686, 688, and 710 $ 52.42 $ 48.19LCA95959 Knife – Tungsten-coated,

Right-hand684, 686, 688, and 710 $ 71.58 $ 65.89

LCA95958 Knife – Tungsten-coated, Left-hand

684, 686, 688, and 710 $ 71.58 $ 65.89

Crop cleaners and scrapers:

LCA67156 Cleaner, Left-hand 676 and 678 $ 13.96 $ 12.79

LCA69805 Cleaner, Left-hand 684, 686, 688, and 710 $ 13.31 $ 12.19

LCA67157 Cleaner, Right-hand 676 and 678 $ 13.31 $ 12.19

LCA69806 Cleaner, Right-hand 684, 686, 688, and 710 $ 13.31 $ 12.19

LCA72851 Scraper, Left-hand 684, 686, 688, and 710 $ 8.84 $ 8.09

LCA72852 Scraper, Right-hand 684, 686, 688, and 710 $ 8.66 $ 7.99

Skid plates:

LCA64910 Center 676 and 678 $ 63.45 $ 58.39

LCA84040 Skid Plate (-2002) 684, 686, 688, and 710 $ 102.84 $ 94.59

DC38275 Wing Drive Coupler 676, 684, 686, 688, and 710 $ 131.70 $ 121.19

LCA93831 Drum Clutch, Water-cooled 684, 686, 688, and 710 $3,548.06 $3,264.19

Divider points:

LCA98764 Gatherer Point, Left-hand 678 $ 952.46 $ 876.29

LCA98765 Gatherer Point, Right-hand 678 $ 952.46 $ 876.29

LCA97977 Gatherer Point, Left-hand 678 $ 944.60 $ 868.99LCA97978 Gatherer Point, Right-hand 678 $ 944.60 $ 868.99

Get the most from your Self-Propelled Forage Harvester (SPFH) this season with a comprehensive inspection from John Deere. Our certified technicians can save you time and money by prepping your machine for the long haul before ever heading out to the field. So inspect now to minimize downtime in the future.

Is your SPFH “good-to-go” for harvest?

Find out with a comprehensive inspection from John Deere.

Call us today to schedule your appointment.

Get ready for the season aheadAn SPFH inspection from a John Deere technician covers the most vital aspects of your machine, including:

■ Engine, Cooling, & Fuel Systems ■ Steering & Brakes ■ Electrical ■ Hydraulic Systems ■ Operator’s Station ■ Safety ■ Feedroll Housing ■ Metal Detector ■ Cutterhead ■ Kernel Processor ■ Spout ■ Blower

Make an appointment today.

FH-8

NUMBER DESCRIPTION/APPLICATION LIST NOW

Blades:

CX15, HX15, and MX15:

FH329908 Suction Blade Center, CCW (Order 2) $ 43.28 $ 39.79

FH329915 Suction Blade Right-Hand, CCW (Order 2) $ 35.76 $ 32.89

FH329914 Suction Blade Left-Hand, CW (Order 2) $ 35.76 $ 32.89

FH329918 Shredding Attachment Upper, CW (Order 2) $ 38.12 $ 35.09

FH329919 Shredding Attachment Upper, CCW (Order 4) $ 38.12 $ 35.09

FH329914 Shredding Attachment Lower, CW (Order 2) $ 35.76 $ 32.89

FH329915 Shredding Attachment Lower, CCW (Order 4) $ 35.76 $ 32.89

CX20 and HX20:

FH329920 Suction Blade, CW (Order 2) $ 43.58 $ 40.09

FH329909 Suction Blade, CCW (Order 4) $ 49.34 $ 45.39

FH329918 Shredding Attachment Upper, CW (Order 2) $ 38.12 $ 35.09

FH329919 Shredding Attachment Upper, CCW (Order 4) $ 38.12 $ 35.09

FH329914 Shredding Attachment Lower, CW (Order 2) $ 35.76 $ 32.89

FH329915 Shredding Attachment Lower, CCW (Order 4) $ 35.76 $ 32.89

Wheels and Tires for Tough Conditions:

CX15, HX15, CX20 and HX20:

AP41020 Wheel, 16PR Foam-Filled Tire, 21 x 7 x 12-in. $290.66 $247.09

AP41022 Wheel, 24PR Foam-Filled Tire 26 x 9 x 14.5-in. $521.17 $442.99

CX15, HX15, MX15, CX20, HX20

John Deere Blades are designed for the toughest conditions—no matter the field you are in.


Making the cut in the field—and in your wallet

Earth-shattering performanceLaserRip™ II Ripper Points

Lifts: Lifts and opens soil for improved root penetration and water percolation.

Fractures: Fractures every soil type efficiently and effectively, potentially improving yield.

When soil compaction is a problem, you need ripper points that stand up to the toughest conditions. The wing profile creates less draft for easier pulling and lower horsepower requirements. Critical wear areas are thicker for longer wear life, and our exclusive cast material resists rock chipping.

52

10" LaserRipPart Number: N400740Applications: DMIFits: 1 ½-in. Parabolic Standard

Part Number: N237223Application: SunflowerFits: 1 ¼-in. Parabolic Standard

Part Number: N236412 Application: DMIFits: 1 ½-in. Parabolic Standard

Part Number: N237224Application: SunflowerFits: 1 ¼-in. Parabolic Standard

Part Number: N400739Applications: DMIFits: 1 ½-in. Parabolic Standard

7" LaserRip II Part Number: KK28541Application: DeereFits: 1 ¼-in. Parabolic Standard

Wingless LaserRip IIPart Number: KK28539Application: DeereFits: 1 ¼-in. Parabolic Standard



LIST $102.43NOW $ 92.19

LIST $109.33NOW $ 98.39

LIST $133.51NOW $120.19

LIST $168.31NOW $151.49

LIST $161.99NOW $145.79

LIST $92.09NOW $82.89

LIST $92.09NOW $82.89

LIST $112.79NOW $101.49

LIST $134.82NOW $121.29

LaserRip™ II

LaserRip

2 ¾" LaserRip 7" LaserRip

See us to learn more about our LaserRip Points today.

53Deere.com/RipperPoints

TILLAGE PARTS

54

■ Wingless points provide ultra-low surface-soil disturbance ■ Choose 7-in. points for moderate soil disturbance ■ 10-in. points deliver low surface-soil disturbance ■ Fits John Deere 913 and 915 Rippers and 2100 Min-Till Ripper

Min-Till Ripper Points

NUMBER WING WIDTH LIST NOWJohn Deere LaserRip Min-till 3/4-in. Straight Standard (ultra-low-to-moderate soil disturbance):N262903 Wingless $120.84 $108.79

N262740 7-in. $125.01 $112.49

N262902 10-in. $125.01 $112.49

■ Designed for highly abrasive soils ■ An economical way to meet standard tillage needs■ Fits common Integral Min-Till V-Rippers and Disk Rippers

Steel Ripper Points

NUMBER SIZE THICKNESS/TYPE LIST NOW

Regular-Duty Steel Ripper Points – 3/4-in. thickness

AA21507 2 1/4-in. x 3/4-in. 3/4-in. – Standard $32.51 $29.29

AN260481 3-in. x 3/4-in. 3/4-in. Single Capped (3 3/4-in.) $41.49 $37.29

AN260482 3-in. x 3/4-in. 3/4-in. Double Capped (7 1/2-in.) $57.33 $51.59

Heavy-Duty Steel Ripper Points – 1 1/4-in. thickness

AP39487 2 1/2-in. x 1 1/4-in. 1/4-in. – Standard $43.58 $39.19AP39496 3-in. x 1 1/4-in. 1/4-in. Single Chrome Capped

(3 3/4-in.)$58.79 $52.89

AP39491 3-in. x 1 1/4-in. 1 1/4-in. Full; Cover Chrome Capped (10-in.)

$74.27 $66.79

■ For use with LaserRip points on 1 1/4-in. and 1 1/2-in. parabolic standards: John Deere, Case, and DMI

■ Move more soil and bury residue ■ Fits John Deere 2700 Mulch Ripper and 2730 Combination Ripper ■ Not for use with wear shins

Coverboards

NUMBER SIZE LIST NOW

N262718 4-in. $34.94 $31.39

N262719 6-in. $42.54 $38.29

N262720 8-in. $44.85 $40.39


Both low- and medium-crown wing designs provide excellent soil mixing and residue retention.

Conventional Chisel Plow Sweeps

NUMBER SIZE CROWN WING LIST NOW

N130188 6 1/2-in. Medium Medium $14.73 $12.49

N130188XLT 6 1/2-in. Medium Medium $36.84 $31.29

47CP014 14-in. Medium Medium $22.79 $19.39

N130182 14-in. Medium Medium $21.55 $18.29

N130182XLT 14-in. Medium Medium $45.67 $38.79


N130177 16-in. Low Narrow $20.28 $17.19




N130178XLT 18-in. Low Narrow $56.73 $48.19




N188290 24-in. Low Medium $46.69 $39.69

N130188

N130185

*Receive 15% off the purchase of one or more John Deere Conventional Chisel Plow Sweeps through October 15, 2019, at participating John Deere Dealers. Discount reflected in NOW price shown. See your participating John Deere Dealer for details.

GET SWEPT UP IN SAVINGSGet 15% off Conventional Chisel Plow Sweeps through October 15th.*

Contact us today!

TILLAGE PARTS

56

The unique wing design of Tru-Width sweeps ensures that they maintain their original cutting width and a sharp point. These sweeps fit John Deere and most brands of chisel plows, mulch tillers, and air seeders.

Tru-Width™ Chisel Plow Sweeps

NUMBER SIZE SHANK ANGLE LIST NOW

Medium-Crown Sweeps

N182044 8-in. regular wing 51 deg. $16.16 $14.49



N182035 12-in. wide wing 51 deg. $16.60 $14.89

N182036 14-in. wide wing 51 deg. $20.21 $18.19

N182037 16-in. wide wing 51 deg. $20.63 $18.59

N182038 18-in. wide wing 51 deg. $25.24 $22.69

Low-Crown (Conservation) Sweeps

N402442 12-in. 51 deg. $21.19 $19.09

N402449 14-in. 51 deg. $24.94 $22.39

N402453 16-in. 51 deg. $24.00 $21.59

N402276 18-in. 51 deg. $35.18 $31.69

High-carbon steel for long life and superior performance. Retains original shape and stays sharp, even after considerable use.

Chisel Points

NUMBER SIZE THICKNESS LIST NOW

Chisel Points for Heel Sweeps, Double Point

N130189 2-in. x 14-in. 5/8-in. $17.58 $15.79

N130190 2-in. x 16-in. 5/8-in. $19.03 $17.09

N130193 4-in. x 14 1/2-in. 3/8-in. $19.28 $17.39

Single-Point Chrome Cap

N237890 2-in. x 12-in. 7/8-in. $35.81 $32.09

AN231796 2-in. x 12-in. 7/8-in. $34.06 $30.69

Heavy-Duty Double Point

N237910 2-in. x 16-in. 7/8-in. $27.00 $24.29

Heel Sweeps for Chisel Points

NUMBER SIZE THICKNESS LIST NOW

N237718 16-in. 1/4-in. $20.54 $18.49

N237719 18-in. 1/4-in. $22.91 $20.59

Chisel and cultivate at the same time, optimizing soil conditions.


Managing crop residue and distribution in any field condition is vital for optimal yield. Inspect your disk harrow today and replace worn components with John Deere genuine OEM parts to ensure performance.

■ Disk Blades – John Deere Diamond Series disk blades are made of micro-alloy steel and heat treated to maximize wear resistance while ensuring flexibility and impact absorption

■ Scrapers – high-strength, heat-treated steel for longer life and to help prevent wear on the blade■ Bearings – manufactured and tested to stand up to extreme use■ Spools – OEM designed to handle constant hammering to the gang and prevent flexing when an obstacle is struck■ Sleeves – made of high-carbon seamless tubing for long wear life■ Gang Bolts – made of high-carbon, heat-treated steel to prevent bending and boxing

See us today so we can help you keep your disk harrow in top shape.

Renew your disk harrow with genuine OEM parts

■ Made of reliable, long-lasting steel for high-performance disking ■ Precision-sharp edges for proper residue cutting and sizing ■ Made in the U.S.A.

John Deere Diamond Series Disk Blades


Spherical, Plain Edge:

B31315 18-in. x .138, 1 1/8 x 1 1/4-in. dual square $28.73 $26.39

A47239 18-in. x .197, 1 1/8 x 1 1/4-in. dual square $30.65 $28.19B31318 20-in. x .177, 1 1/8 x 1 1/4-in. dual square

(2.03-in. concavity)$35.21 $32.39

N231991 20-in. x .177, 1 1/8 x 1 1/4-in. dual square (1.63-in. concavity)

$34.77 $31.99

N330738 20-in. x .197, 1 1/8 x 1 1/4-in. dual square $36.89 $33.89

A49254 22-in. x .177, 1 1/8 x 1 1/4-in. dual square $42.21 $38.79


P22177118S 22-in. x .177, 1 1/8-in. square $42.21 $38.79

A42170 22-in. x .256, 1 1/2-in. round $46.28 $42.59

P22256118S 22-in. x .256, 1 1/8-in. square $52.56 $48.39

A27767 22-in. x .256, 1.547 x 1.672-in. dual square $52.56 $48.39




B35606 24-in. x .256, 1 1/8 x 1 1/4-in. dual square $53.53 $49.19



B35608 26-in. x .256, 1 1/4-in. square $74.79 $68.79

N242039 26-in. x .256, 1 1/4-in. square $82.79 $76.19

Conical, Plain Edge:


K33524 24-in. x .187, 1 1/2-in. round $56.01 $51.49

B32715 24-in. x .256, 1 1/4-in. square $69.96 $64.39

B28211 24-in. x .256, 1 1/2-in. square $71.89 $66.09

B32717 26-in. x .256, 1 1/4-in. square $74.79 $68.79

B29353 26-in. x .256, 1 1/2-in. square $74.79 $68.79

BEARINGS

58

John Deere Dura-Flex bearings continue to offer superior quality and consistency that is unmatched by aftermarket will-fit bearings. Introduced in 2005, they are used on disk gang assemblies and rolling baskets up to the 2600 series disks.Dura-Flex Bearing Features: ■ Includes 2-year warranty ■ Built using a ball ridging, one-piece, molded nylon cage for perfect alignment ■ Engineered with a thicker inner bearing race that creates a stronger cross section

to withstand tough loads■ Designed with a heavy-duty bearing so the ball is harder than the rings ■ Provides total clearance between rings and rolling elements for optimal load

distribution and free rotation to allow for thermal expansion■ Prevents premature bearing failure with smooth rolling bearings ■ Contains a chamfer in the lubrication hole to ensure proper grease flow ■ Increased uptime with a recommended grease interval of 50 hours ■ Features seals of a longer length and high-quality material with smooth edges,

providing a tight seal to withstand tough conditions

Dura-Flex Bearings

Maintenance-free bearings were introduced with the 2600 series disks. They are used on disk gangs and rolling baskets.Maintenance-Free Bearing Features: ■ Includes 2-year warranty ■ Increases productivity by reducing the amount of required service time ■ Packaged with rust-preventative paper for added protection

Maintenance-Free Bearings

NUMBER DESCRIPTION APPLICATION LIST NOWAKK16196 Maintenance-Free Bearing Disks: 2620, 2623, 2623VT,

and 2625 Rippers: 2720 and 2730

$87.49 $78.69

NUMBER DESCRIPTION APPLICATION LIST NOWAA28184 Dura-Flex Bearing Disks: 210, 215, 220, 230, 235, 621, 627, 630, 637 (Rigid

Standards) Seedbed Finisher: 200 Mulch Finishers: 722, 724, 726, and 2310 Mulch Tillers: 710, 712, and 714 Field Cultivators: 980 and 2210 Air Disk Drill: 730 and 730LL

$23.33 $20.99

A-AA28184 Bearing Disks: 210, 215, 220, 230, 235, 621, 627, 630, 637 (Rigid Standards) Seedbed Finisher: 200 Mulch Finishers: 722, 724, 726, and 2310 Mulch Tillers: 710, 712, and 714 Field Cultivators: 980 and 2210 Air Disk Drill: 730 and 730LL

$21.36 $19.19

AA28186 Dura-Flex Bearing Disks: 310, 315, 330, 331, 335, 340, 350, 355, 360, 370, 375, 635, 637 (C-Spring Standards), 640, and 650 Rippers: 510 and 512

$37.79 $33.99

A-AA28186 Bearing Disks: 310, 315, 330, 331, 335, 340, 350, 355, 360, 370, 375, 635, 637 (C-Spring Standards), 640, and 650 Rippers: 510 and 512

$37.69 $33.89

AA30941 Dura-Flex Bearing Kit Includes: AA28184 bearing, flanges, gasket, bolts, and nuts

Disks: 210, 215, 220, 230, 235, 621, 627, 630, and 637 (Rigid Standards) Mulch Tillers: 710, 712, and 714

$40.15 $36.09

A-AA30941 Bearing Kit Includes: AA28184 bearing, flanges, gasket, bolts, and nuts

Disks: 210, 215, 220, 230, 235, 621, 627, 630, and 637 (Rigid Standards) Mulch Tillers: 710, 712, and 714

$41.47 $37.29

AA30942 Dura-Flex Bearing Kit Includes: AA28186 bearing, flanges, gasket, bolts, and nuts

Disks: 310, 315, 330, 331, 335, 340, 350, 360, 370, 637 (C-Spring Standards), 640, and 650 Rippers: 510 and 512

$57.39 $51.69

A-AA30942 Bearing Kit Includes: AA28186 bearing, flanges, gasket, bolts, and nuts

Disks: 310, 315, 330, 331, 335, 340, 350, 360, 370, 637 (C-Spring Standards), 640, and 650 Rippers: 510 and 512

$66.14 $59.49

AKK22197 Extended Life Greasable Bearing Disks: 2600 Series $59.96 $53.99

AIR SEEDER AND DRILL PARTS

60

Use the low meter roller for seeds such as flax, canola, and alfalfa. The medium roller is best when planting wheat, barley, canola, and small soybeans up to 1/4 inch in diameter and with medium rates of fertilizer. The high rate roller is for high rates of fertilizer and large soybeans bigger than 1/4 inch in diameter. The very high rate roller is best used when planting barley and oats with beards, large seeds such as garbanzo beans, and with very high fertilizer rates. Fine tuning rings reduce the amount of product available to meter for increased accuracy.

Meters, Rollers, and Tuning Rings for John Deere Air Seeders

NUMBER METER TYPE APPLICATION RATE LIST NOW

Meter Roller Kits:

AA45605 Low 1–20 lb. per acre $64.32 $59.19

AA45606 Regular 20–130 lb. per acre $93.09 $85.59

AA45607 High Rate 30–220 lb. per acre $84.42 $77.69

Meter Rollers:

A58874 Low 1–20 lb. per acre $53.88 $49.59

A58473 Regular 20–130 lb. per acre $40.67 $37.39

A58479 High Rate 30–220 lb. per acre $34.57 $31.79

A69212 Very High Rate 50–265 lb. per acre $33.36 $30.69

Fine-Tuning Rings:

A57192 Low $ 7.67 $ 7.09

A57197 Regular $ 7.67 $ 7.09

A57195 High Rate $ 7.67 $ 7.09

A70069 Very High Rate $ 6.75 $ 6.19

John Deere offers 1-in., 1 1/4-in., and 2 1/2-in. diameter, green, black, or clear helix hose for air seeder applications. This clear, smooth-core PVC hose is recommended for heavy-duty suction and discharge of seed, as well as for agricultural chemicals, marine, and liquid waste.

Air Seeder Hose—Low Pressure

NUMBER ID. OD LIST NOW

PM112CL200 1-in. 1.25-in. $2.36 $2.12

PM112GR125 1 1/4-in. 1.47-in. $0.92 $0.83

PM112BK250 2 1/2-in. 2.84-in. $2.35 $2.12 Price shown is per foot.

Air Cart PartsNUMBER DESCRIPTION LIST NOW

A59680 Tank Seal (qty. 4 required) $ 11.76 $ 10.79

AA58783 Belt Set – Conveyor Short 250/270/340 Bushel $2,555.63 $2,351.19

AA58782 Belt Set – Conveyor Long 350/430/550 Bushel $2,720.52 $2,502.89

A81561 Belt Splice $ 81.33 $ 74.79

A81562 Belt Lace $ 75.27 $ 69.19

AA46566 Steel Auger – 8" $ 901.84 $ 829.69

AA46590 Brush Auger 250/270/340 Bushel – 8" $ 726.76 $ 668.59

AA46589 Brush Auger – 8" $ 973.24 $ 895.39

AA46567 Steel Auger 250/270/340 Bushel – 8" $ 799.87 $ 735.89



Seed BootN284045

90 Series Opener Parts

Opener BladesN283804

Closing WheelN283866

Spoke Gauge WheelAA86055


Opener Parts

N283804 Opener Blade 1890/1590 $ 34.32 $ 31.59

N219547 Arm Bushing 1890/1590 $ 4.61 $ 4.19

A85727 Seal 1890/1590 $ 7.06 $ 6.49

N282536 Pin 1890/1590 $ 32.90 $ 30.29

W33806 Sleeve 1890/1590 $ 6.81 $ 6.29

N284055 Leaf Spring 1890/1590 $ 4.57 $ 4.19

N219982 Seed Tab 1890/1590 $ 2.03 $ 1.89

N284044 Standard Seed Boot, RH 1890/1590 $ 39.15 $ 35.99

N284045 Standard Seed Boot, LH 1890/1590 $ 39.15 $ 35.99

N284024 Extended-Wear Seed Boot, RH 1890/1590 $101.95 $ 93.79

N284025 Extended Wear Seed Boot, LH 1890/1590 $101.95 $ 93.79

AN281856 Hub Assembly 1890/1590 $ 81.54 $ 74.99

N283293 Bushing 1890/1590 $ 14.18 $ 12.99

B13294 Seal 1890/1590 $ 6.57 $ 5.99

AA92485 Arm 1890/1590 $ 71.15 $ 65.49

Press Wheel Parts

N281706 Press Wheel 1890/1590, s/n: -710100 $ 15.52 $ 14.29

N281714 Press Wheel Tire 1890/1590, s/n: -710100 $ 9.36 $ 8.59

AN281357 Ball Bearing 1890/1590 $ 5.93 $ 5.49

N284111 Press Wheel 1890/1590, s/n: 710101- $ 15.52 $ 14.29

N284110 Press Wheel Tire 1890/1590, s/n: 710101- $ 11.45 $ 10.49

19H3107 Cap Screw 1890/1590 $ 4.41 $ 4.09

Gauge Wheel Parts

AA66599 Steel Gauge Wheel Assembly 1890/1590 $ 82.30 $ 75.69

AN212132 Bearing 1890/1590 $ 13.51 $ 12.39

A84050 Tire, Semi-Pneumatic, 4.5 x 16-in. 1890/1590 $ 34.06 $ 31.29AA66604 Wheel and Tire Assembly

Offset Gauge1890/1590 $100.46 $ 92.39

A84062 Tire, Gauge Wheel, 4.5 x 16-in. 1890/1590 $ 38.76 $ 35.69

AA66988 Narrow Gauge Wheel Assembly 1890/1590 $ 84.79 $ 77.99

A85133 3-in. Narrow Tire 1890/1590 $ 42.76 $ 39.29

AA98187 Spoked Gauge Wheel Assembly 1890/1590 $143.21 $131.79AA98189 Conservation Wheel and

Tire Assembly1890/1590 $155.48 $142.99

Closing Wheel Parts

N283932 Closing Wheel Spring, RH 1890/1590 $ 24.43 $ 22.49

N283933 Closing Wheel Spring, LH 1890/1590 $ 22.79 $ 20.99

AN282190 Closing Arm Assembly, RH 1890/1590 $266.53 $245.19

AN282191 Closing Arm Assembly, LH 1890/1590 $271.96 $250.19

N283866 Closing Wheel 1890/1590 $ 53.48 $ 49.19


62

60-Series Opener PartsNUMBER DESCRIPTION APPLICATION LIST NOW

Opener Parts

N283636 Bushing 1560/1860 $ 6.10 $ 5.59

N219547 Bushing 1560/1860 $ 4.61 $ 4.19

A85727 Seal 1560/1860 $ 7.06 $ 6.49

N282536 Pin 1560/1860 $ 32.90 $ 30.29

N282087 Sleeve 1560/1860 $ 38.48 $ 35.39

N284055 Leaf Spring 1560/1860 $ 4.57 $ 4.19

N283432 Seed Boot, RH – Lower, Extended Wear 1560/1860 $ 39.01 $ 35.89

N282788 Seed Boot, RH – Upper 1560/1860 $ 37.40 $ 34.39

N282789 Seed Boot, LH – Upper 1560/1860 $ 37.40 $ 34.39

N283433 Seed Boot, LH – Lower, Extended Wear 1560/1860 $ 39.01 $ 35.89

N283804 Opener Blade 1560/1860 $ 34.32 $ 31.59

AA71196 Arm, RH 1860 $661.42 $608.49

AA71197 Arm, LH 1860 $695.51 $639.89

N282817 Rear Rank Opener Seed Tube 1560 $ 48.42 $ 44.49

N282720 Front Rank Opener Seed Tube 1560 $ 49.13 $ 45.19

N282719 Separate Placement Fertilizer Tube 1560 $ 49.72 $ 45.69

A63630 Seed Tube, Straight 1860 $ 67.47 $ 62.09

A63632 Seed Tube, RH 1860 $ 83.25 $ 76.59

A63631 Seed Tube, LH 1860 $ 89.06 $ 81.89

Press Wheel Parts

N281706 Wheel 1560/1860 $ 15.52 $ 14.29

N281714 Tire, 1 x 10-in., Semi-Pneumatic 1560/1860 $ 9.36 $ 8.59

AN281357 Ball Bearing 1560/1860 $ 5.93 $ 5.49

N284111 Press Wheel 1560/1860 $ 15.52 $ 14.29

N284110 Press Wheel Tire 1560/1860 $ 11.45 $ 10.49

Gauge Wheel Parts

AA66599 Steel Gauge Wheel Assembly 1560/1860 $ 82.30 $ 75.69

AA66604 Smooth Gauge Wheel Assembly 1560/1860 $100.46 $ 92.39

A84050 Tire, Pneumatic 4.5 x 16-in., Smooth Sided/Steel 1560/1860 $ 34.06 $ 31.29

AN212132 Bearing 1560/1860 $ 13.51 $ 12.39

A84062 Tire, 4.5 x 16-in. for Offset Gauge Wheel 1560/1860 $ 38.76 $ 35.69

A84451 Conservation Tire, 4.5 x 16-in. 1560/1860 $ 44.93 $ 41.29

AA98189 Conservation Wheel and Tire Assembly 1560/1860 $155.48 $142.99

AA98188 Narrow Gauge Wheel Assembly 1560/1860 $143.21 $131.79

AA98187 Spoked Gauge Wheel Assembly 1560/1860 $143.21 $131.79

Closing Wheel Parts

N283994 Closing Wheel Spring, RH 1560 $ 10.42 $ 9.59

N283995 Closing Wheel Spring, LH 1560 $ 10.42 $ 9.59

AN281170 Arm, RH 1560/1860 $245.45 $225.79

AN281171 Arm, LH 1560/1860 $245.45 $225.79

N282110 Closing Wheel 1560/1860 $ 40.51 $ 37.29

N283994 Closing Wheel Spring, RH 1860 $ 10.42 $ 9.59

N283995 Closing Wheel Spring, LH 1860 $ 10.42 $ 9.59

Opener BladeN283804

Press Wheel TireN284110

Front Rank Opener Seed TubeN282720

Closing WheelN282110

63


JDParts.JohnDeere.com

Air Hoe Drill PartsNUMBER DESCRIPTION APPLICATION LIST NOW

Points

N219619 Point, Spear 1820/1830 $ 24.03 $ 22.09

M15012 Single-Point, Wrap-Around 1820/1830 $ 12.24 $ 11.29

AA71412 Point, Seed, Single Row 1870 $112.33 $103.29

AA74427 Point, Seed, Paired Row 1870 $176.52 $162.39

AA74478 Aqua Anhydrous Point 1870 $163.33 $150.29

AA69276 Anhydrous Hi-Top Point 1870 $163.33 $150.29

AA74476 Liquid and Dry Fertilzer Point 1870 $163.33 $150.29

Shovels

AN213462 Shovel Weldment, Spear Point 1820/1830 $109.34 $100.59

N219423 Seed Deflector 1820 (s/n: -705100)/1830 $ 14.49 $ 13.29

Openers

N280371 Standard, Hoe Opener 1820/1830 $104.07 $ 95.69

A57995 Standard, Spring Cushion LH Offset 1820/1830 $218.78 $201.29

A57996 Standard, Spring Cushion RH Offset 1820/1830 $218.78 $201.29

N217347 Link Spring 1820/1830 $ 5.64 $ 5.19

N217747 Seed Tube 1820/1830 $ 69.13 $ 63.59

Press Wheels and Tires

A81731 3 x 21-in., Semi-Pneumatic 1820/1830 $ 78.97 $ 72.69

A93809 4 x 21-in., Press Wheel Tire 1820/1830 $100.28 $ 92.29

AA79788 4 x 21-in., Semi-Pneumatic, Middle 1820/1830 $444.91 $409.29

AA48855 3-in. Steel Middle Press Wheel 1820/1830 $256.79 $236.19

AA49031 3-in. Steel End Press Wheel 1820/1830 $272.87 $250.99

AA48605 4-in. Steel Middle Press Wheel 1820/1830 $272.87 $250.99AA48606 4-in. Steel End Press Wheel,

Weldment1820/1830 $264.84 $243.69

AA58273 Split Middle Press Wheel 1820/1830 $283.34 $260.69

AA69721 Split End Press Wheel 1820/1830 $134.51 $123.69

A61674 4 x 22-in. Steel Press Wheel 1820/1830 $ 57.25 $ 52.69

A64409 3 x 21-in. Steel Press Wheel 1820/1830 $ 51.85 $ 47.69

A84897 5.5 x 21-in., Semi-Pneumatic 1830 $199.21 $183.29

AA64754 3 x 21-in., Semi-Pneumatic, Middle 1830 $415.81 $382.49

AA64755 3 x 21-in., Semi-Pneumatic, End 1830 $422.22 $388.39AA67808 5.5 x 21-in., Semi-Pneumatic,

Middle1830 $507.52 $466.89

AA67809 5.5 x 21-in., Concave, Semi-Pneumatic, End

1830 $535.45 $492.59

A96468 Support, Scraper RH 1870 $ 70.70 $ 64.99

A107101 Support, Scraper LH 1870 $ 70.70 $ 64.99

AA73487 Tire and Wheel Assembly 1870 $245.48 $225.79

PointM15012

Standard Hoe OpenerN280371

Press WheelA61674

ShovelAN213462

Conventional Drill Parts

Press Wheel162400 Double Disk Opener Blade

N283805

NUMBER DESCRIPTION APPLICATION LIST NOWN283805 Double Disk Opener Blades, 13.5-in. 450, 455, 8000, 8500, 9400 $16.47 $15.19

AN162400 Press Wheel, Wheel Assembly 2 x 13-in. Tire

450, 455, 8000, 8500 $64.31 $59.19

AN281598 Press Wheel, Wheel Assembly, 2 x 13-in. Smooth Side

450, 455, 8000, 8500 $90.39 $83.19

AN281357 Gauge Wheel Bearing 450, 750, 8000, 8500, 9400 $ 5.93 $ 5.49

N407659 Rubber Tube/Hose – Seed, Fertilizer 450, 750, 8000, 8500, 9000 $ 8.64 $ 7.89

64

Sprayer NozzlesQuick Change Nozzles with ExactApply™ Compatibility

■ Delivers up to 10% increase in weed control over conventional flat fans■ 50–75% less drift compared to flat fan nozzles■ Tight, inclined spray pattern is designed to be installed alternating forward and

backward to provide 3-dimensional coverage on hard-to-hit targets■ High-velocity droplets provide excellent canopy penetrations■ ExactApply compatible with 30Hz PWM, AutoSelect A/B and conventional

3D – All-Purpose Coverage Nozzle


PS3DQ00015 3D Quick Change Nozzle $6.33 $5.82









Ultra Low-drift (ULD) – Pre- and Post-Emerge Systemic Herbicides■ Included on Dicamba and 2,4-D chemical labels. Ideal for use when drift reduction

is paramount■ Air-induced droplets provide precise droplet control to minimize drift potential■ 60° thick spray pattern and 120° wide spray angle enables lower boom height to

further decrease drift■ ExactApply compatible with AutoSelect A/B and conventionalNUMBER DESCRIPTION LIST NOW

PSULDQ20015 Ultra Low-drift Quick Change Nozzle $7.99 $7.35






PSULDQ2006 Ultra Low-drift Quick-Change Nozzle $7.99 $7.35

PSULDQ2008 Ultra Low-drift Quick-Change Nozzle $7.99 $7.35

■ Tapered wide-angle fan style promotes uniform nutrient application■ Wide 140° pattern allows low boom height, minimizing corrosive effects on

application equipment■ Large droplets reduce drift compared to flood or deflect nozzles■ ExactApply compatible with 15Hz & 30Hz PWM, AutoSelect A/B and conventional

High Flow (HF) – Pre- and Post-Emerge Fertilizer


PSHFQ4008 High Flow Quick Change Nozzle $9.06 $8.33








65

Sprayer NozzlesQuick Change Nozzles with ExactApply™ Compatibility

■ Twin 30° forward and rear facing dual angles for superior coverage■ Medium and Coarse droplets across wide operating range and sizes to meet speed/

rate needs■ ExactApply compatible with 15Hz and 30Hz PWM, AutoSelect A/B, and

conventional spraying■ John Deere exclusive

Low-drift Twin (LDT) – Plant Health and Contact Herbicides


PSLDTQ1003 Low-drift Twin Quick Change Nozzle $9.74 $8.96








■ 120° wide spray angle and 60° thick pattern provides optimum coverage while maintaining overlap at low boom heights

■ Dual pre-orifice nozzle delivering Coarse, Very Coarse, and Extremely Coarse droplets to reduce drift

■ ExactApply compatible with 15Hz and 30Hz PWM, AutoSelect A/B, and conventional spraying

■ John Deere exclusive

Low-drift Max (LDM) – Post-Emerge Systemic Herbicides

■ Ideal for Dicamba and 2,4-D applications (check chemical labels for approvals)■ 130° spray angle allows lower boom heights to reduce drift and prevent pattern

collapse when using drift reduction adjuvants■ Extremely Coarse and Ultra Coarse droplets for 90–95% drift reduction compared

to standard flat fan nozzle■ Air filled droplets to reduce drift■ ExactApply compatible with AutoSelect A/B and conventional spraying

Ultra Low-drift™ Max (ULDM) – Post-Emerge Systemic Herbicides


PSULDMQ3004 Ultra Low-drift Max Quick Change Nozzle $10.83 $9.96




JohnDeere.com/SprayerParts


PSLDMQ2003 Low-drift Max Quick Change Nozzle $10.83 $9.96






john deere catalog - sloan implement · 2019. 7. 30. · john deere catalog parts, equipment,...

Documents