john deere combines 9570 sts corn combine · pdf file9570 sts combine deluxe operator's...

9570 STS COMBINE

DELUXE OPERATOR'S CAB:Pressurized Cab with HVAC ClimaTrak

Automatic Temperature Control2 Large Convex, Rearview MirrorsWindshield Wiper (1-Blade) with WasherTilt-Telescoping Steering ColumnComfortCommand Seat with Air SuspensionTraining SeatDriver and Training Seat BeltsSun Visor, Coat Hook, and Operator's

Manual Storage3-Position Pivoting Operator's LadderLarge Cup HolderAuxiliary Power Outlet StripBusiness Band Radio Pre-wireRadio Ready with two Pre-wired

Speakers and Antenna

CONTROLS AND INSTRUMENTATION:CommandTouch Operator Control Console

with Electro-Hydraulic ControlledHeader and Separator Controls

Dial-A-Speed (Automatic Reel Speed Control)Header Reverser with Reel Reverse Feature for

Flex and Rigid PlatformsCommandCenter Armrest Display Unit for:

HarvestSmartTouchSet (Automatic Combine Adjustment)Harvester MonitorWarning Alarm and Diagnostic Information

CenterGreenStar AutoTrac Ready Wiring Harness andSteering Components

with Harvester Monitor System LESS GreenStarDisplay

JDLink Hardware Mounting CompatibleHydrostatic Ground Speed Control

Handle with Integral Buttons for:Reel Height and Fore/Aft RemoteReel Control or FeederhouseBackshaft Speed2-Speed Header Raise and Lower

Contour-Master Tilt Control3-Position Header Height and

Reel Resume5-Position Unloading Auger Swing and

Unloading Auger Engage ControlsQuick-Stop Header/Unloading Auger

Disengage SwitchDraper Variable Belt Speed In-Cab ControlTouchSet (Automatic Combine Adjustment) includes:

Full Automatic Adjustment or IndividualRemote Adjustment for Rotor Speed,Concave Spacing, Cleaning Fan RPM,and Chaffer/Sieve Element Opening

GreenStar Harvest Monitoring(Yield and Moisture)

Multi-Function CommandTouch CornerPost Display with:3-Line Digital TachometerVisionTrak Grain Loss

and Tailings MonitorActive Header Control and Header

Float DisplayPremium Header Control Package Includes:

3-Position Header Height Resume, ReelResume, Active Header Float Systemand Header Height Sensing System

LIGHTING:High Intensity 65 Watt Infrared Halogen

Transport and Field Lamps (6)Grain Tank and Unloading Auger Lamps (2)Warning and Tail Lamps with Integral

Turn Signals (4)

Rotating beacon lights with Grain Cart Call (3)SideFinder Lights (2)Cleaning Shoe LightsExit LightingRear Residue Discharge Lights (2)Stubble Lights (2)Deceleration Warning Light

FEEDERHOUSE:Standard Duty FeederhouseContour-Master Feederhouse with Reverser and

Heavy-Duty Variable Speed Drive System (Corn)Level Land Feederhouse with Reverser and

Fixed Speed Drive System (Small Grain)17 Degree Fore/Aft Adjustable

Front Tilt FrameHeavy-Duty Reverser with Push Button

Electro-Hydraulic Shift EngagementSingle-Point Electric Hydraulic Hookup

and Latching System2-Speed Feeder ChainFront Drum Side Shields

THRESHING AND SEPARATING:Bullet Rotor Threshing Technology

24 In. Diameter (600 mm) Feeding andThreshing Section

27 In. Diameter (678 mm) SeparatingSection

Total Rotor Length of 124.5 In. (3164 mm)Feed Accelerator 10-Wing 17 In. Diameter

(420 mm) with 2-Speed Drive (440/800 RPM)Stone Trap with Remote Dump5 Wings 17 In. Diameter (420 mm)

Discharge Beater and Grate3 Concave Sections 0.9 Sq. Meter

Total AreaRound Bar Concave (Corn)Small Wire Concave

(Small Grain)15 Threshing Bars16 Open Row Separator Grates

1.3 Sq. Meter Total AreaDischarge Beater Grate 0.3 Sq.Meter Total Area

230-1300 RPM Dual-Range Posi-TorqSeparator Drive

CLEANING:2-Stage Dyna-Flo II Cleaning System has:

12 Blades 20 In. Diameter (500 mm)Dual Discharge Cleaning Fan

Deep Tooth Remote Adjustable Chafferand Sieve (Corn)

General Purpose Remote Adjustable Chafferand Sieve (Small Grain)Non-Adjustable Front Chaffer

Separator Air Discharge Chute Agitators

RESIDUE MANAGEMENT:Wing Blade Wide-Spread, Fine Cut, 2-Speed

Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

GRAIN HANDLING:250 Bushel (8850L) Grain Tank2.2 Bushels Per Second (average),

2.5 Bushels Per Second (instantaneous),Unloading System with 18.5 Ft. (5.6M)Unloading Auger

25 Ft. (7.6M) Unloading Auger - fromCombine Centerline

Manual Folding Grain Tank Loading Auger

ENGINE:John Deere 6 Cylinder 6068H (6.8L)

PowerTech Plus Diesel Engine Technology

AGRICULTURAL PRODUCTSJOHN DEERE COMBINES

9570 STS Corn Combine (Model Year 2011)Equipment for Base Machine

06 May 2011 US & Canada3-Combines-00100- 1

with TurboCharger and Air-to-AirAftercooler265 Hp (198 KW) at 2400 RPM,284 Hp Max Power Bulge at 2400 RPM and294 Hp Max Unloading Power Boost

Electronically Controlled Fuel Injectionand Fuel Shutoff

200 AMP Alternator200 Gal. (757 L) Fuel TankRotary Screen Air Intake with Vacuum PickupAutomatically Tensioned Poly-V Accessory

Drive BeltsStandard Capacity Engine Pre-Cleaner and

Air Cleaner Filter SystemHigh Capacity Wide Spaced Tube RadiatorAir Scoop Cooling TechnologyExport Complaint Power unit. (Export only exceptAustralia and Mexico)

WHEELS AND DRIVES:30.5L-32 In. 14PR Cleat (R1)

Drive Wheels and Tires16.9R-26 In. Two Star Cleat (R1)

Steering Wheels and TiresHeavy-Duty (105cc High-Torque) Variable

Speed Hydrostatic Ground Drive Systemwith 3-Speed Transmission (20K Transmission -Export Russia only)

Heavy-Duty Final DriveAdjustable Rear Axle with Heavy-Duty

Spindles

HYDRAULICS:Open Center Hydraulic System with

Proportional Header Height, Reeland Spreader Speed Control withHigh Capacity (15 GPM) System andSingle Piece Integral Valve Assembly

Header Suspension System with ActiveFloat Mode and .7 Liter Accumulator

Feederhouse Lift Cylinders2.75 In. (70 mm) Diameter

Reel Fore/Aft Hydraulics

SERVICEABILITY:Full Composite Flip-Open Side ShieldsCentral Lube ChartsEasy Access Lube BanksHydraulic Diagnostic ReceptaclesSteel Tool Box with TrayBattery Storage Container to Ground Level -

Extend Battery Posts and Cut-Off Switch

MISCELLANEOUS:One 10-Lb. Type ABC Fire Extinguisher

(Front Mounted) - Not included forRussia

One 2.5 Gal. Water Fire Extinguisher. Shippedempty, requires filling at pre-delivery.

(Rear Mounted) - Not included forRussia

Independent Hydraulic BrakesManual Park BrakeBack Up AlarmComposite Styling with Air Scoop

Advanced Air IntakeCAN-BUS Electronic On-Board Communication

System with Solid State Power DistributionCenters

Temporary Surface Rust/Corrosion Protection (ExportOnly)

LESS HEADER EQUIPMENT

CODEATTACHMENTIDENTIFIER DESCRIPTION

SUGGESTEDLIST PRICE

USD ($)

Select One Code From Each Required Category

BASE MACHINEEX-WORKS East Moline, Illinois

160KH 9570 STS Corn Combine (Model Year 2011)For use with Non-StalkMaster Corn Heads up to 8 Rows, StalkMaster Corn Heads up to 6Rows, Platforms up to 30 Ft., Draper Platforms up to 30 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms or size.

268,216.00

VALUE PACKAGE CONFIGURATIONSWhen selecting a package, review header compatibility information listed within the BASEMACHINE section.


9570 STS Corn Combine (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)

VALUE PACKAGE CONFIGURATIONS ...Continued...

Corn and Soybean Packages:0521 Performance with 18.5 Ft. Unloading Auger

>> Corn and Soybean Customer**IF GREENSTAR DISPLAY IS REQUIRED, ORDER DIRECTLY FROM AMS**

Features:(1560) Contour-Master Feederhouse with Heavy-Duty Variable Speed Drive(1975) Premium Header Control Package(2805) Round Bar Concave(3530) Deep Tooth Chaffer and Sieve(3710) General Purpose/Regular-Duty Clean Grain Elevator, Grain

Tank Vertical Unloading Auger and Cross Augers(3904) General Purpose Grain Handling System with Standard Unloading

Rate and 18.5 Ft. Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated

Chaff Spreader and Single-Point Adjustable Knife Bank

-705.00

0522 Performance with 21.5 Ft. Unloading Auger>> Corn and Soybean Customer

> Operating wider platforms**IF GREENSTAR DISPLAY IS REQUIRED, ORDER DIRECTLY FROM AMS**

Features:(1560) Contour-Master Feederhouse with Heavy-Duty Variable Speed Drive(1975) Premium Header Control Package(2805) Round Bar Concave(3530) Deep Tooth Chaffer and Sieve(3710) General Purpose/Regular-Duty Clean Grain Elevator, Grain

Tank Vertical Unloading Auger and Cross Augers(3920) General Purpose Grain Handling System with Standard Unloading

Rate and 21.5 Ft. Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated


-705.00

0532 Performance with 21.5 Ft. Unloading Auger and SLS>> Corn and Soybean Customer

> Operating wider platforms> Operating on slopes

**IF GREENSTAR DISPLAY IS REQUIRED, ORDER DIRECTLY FROM AMS**

Features:(1560) Contour-Master Feederhouse with Heavy-Duty Variable Speed Drive(1975) Premium Header Control Package(2805) Round Bar Concave(3535) Deep Tooth Chaffer and Sieve with SLS(3710) General Purpose/Regular-Duty Clean Grain Elevator, GrainTank Vertical Unloading Auger and Cross Augers(3920) General Purpose Grain Handling System with Standard UnloadingRate and 21.5 Ft. Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-705.00





SUGGESTEDLIST PRICE

USD ($)

VALUE PACKAGE CONFIGURATIONS ...Continued...0524 Smart Performance with 21.5 Ft. Unloading Auger

>> Corn and Soybean Customer> Operating wider platforms> Requires the productivity enhancement of GreenStar

AutoTrac Ready assisted steering> Requires HarvestSmart Feedrate Control System


Features:(1560) Contour-Master Feederhouse with Heavy-Duty Variable Speed Drive(1985) HarvestSmart Feedrate Control and Premium Header Control Package(2805) Round Bar Concave(3530) Deep Tooth Adjustable Chaffer and Bottom Sieve(3710) General Purpose/Regular-Duty Clean Grain Elevator, GrainTank Vertical Unloading Auger and Cross Augers(3920) General Purpose Grain Handling System with Standard UnloadingRate and 21.5 Ft. Unloading Auger(4160) Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated ChaffSpreader and Single-Point Adjustable Knife Bank

-2,820.00

0599 No PackageOrder one code from each box in price pages.

In Base Price

CAB TYPE0810 Deluxe Cab

Includes base cab with windshield washer and radio ready (two pre-wired speakers andantenna).

In Base Price

0820 Premium CabIncludes base cab with windshield washer, Deere-Delco AM/FM stereo radio withweatherband, antenna, two speakers, and service lights.

1,113.00

0830 Premier CabIncludes base cab with windshield washer, Deere-Delco AM/FM stereo radio withweatherband and single-play CD player, antenna, two speakers, service lights, FieldVisionXenon HID lighting, and training seat with Field Office.

3,564.00

0840 Premier Cab Less RadioIncludes base cab with windshield washer, radio ready (two pre-wired speakers and antenna),service lights, FieldVision Xenon HID lighting, and training seat with Field Office.Export only.

3,032.00

FEEDERHOUSE TYPE1510 Level Land Feederhouse with Reverser and Regular-Duty Variable

Speed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 6 Rows and less, Rigid Platforms 30Ft. and less, 25 Ft. Draper Platform, and the 615 Belt Pickup.

-7,316.00

1520 Level Land Feederhouse with Reverser and Heavy-Duty VariableSpeed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 8 Rows and less, StalkMaster CornHeads 6 Rows and less, Rigid Platforms 30 Ft. and less, 25 Ft. Draper Platform, and the 615Belt Pickup.

-5,849.00

1560 Contour-Master Feederhouse with Reverser and Heavy-Duty VariableSpeed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 8 Rows and less, StalkMaster CornHeads 6 Rows and less, Flex Platforms 30 Ft. and less, Rigid Platforms 30 Ft. and less, 25 Ft.

In Base Price





SUGGESTEDLIST PRICE

USD ($)

FEEDERHOUSE TYPE ...Continued...Draper Platform, and the 615 Belt Pickup. Contour-Master is recommended to maximizeperformance of 600D Draper Platforms when operating in rolling terrain.

FEEDERHOUSE LIFT CYLINDERS1720 2.75 In. (70 mm) Feederhouse Lift Cylinders In Base Price

COMBINE/HEADER CONTROL SYSTEMS1975 Premium Header Control Package

Includes: 3-Position Header Height Resume, Reel Resume, Active Header Float System andHHS (Header Height Sensing). For combines operating with platforms equipped with HHS(Header Height Sensing).

In Base Price

1985 HarvestSmart Feedrate Control and Premium Header Control PackageIncludes: 3-Position Header Height Resume, Reel Resume, Active Header Float System andHHS (Header Height Sensing) System. For combines operating with platforms equipped withHHS (Header Height Sensing). Also includes: Feedrate Control System Sensors, WireHarness and Electronic Controls. HarvestSmart Feedrate Control is not recommended for usein harvesting operations that are consistently limited by header capability, and is notrecommended for use in very muddy conditions or where sidehill losses are the limit ofcombine capacity.

8,356.00

CONCAVES AND EXTENDED WEAR SEPARATOR PACKAGESFor specific recommended crop applications for each of the three type Concaves offered, referto the Agricultural Sales Manual.

Regular Duty Concaves:2805 Round Bar Concave

Only first concave section heat-treated.Use for Multi-Crop Harvesting.

In Base Price

Extended Wear Concaves/Separator Package:Extended Wear Concaves and Separator Packages are recommended for combines that will beharvesting in large amounts of abrasive crop conditions such as rice, edible beans, highyielding irrigated or hard to thresh crops. STS Rice Combines include the Extended WearLarge Wire Concave and Extended Wear Separator Parts in base equipment.

2825 Extended Wear Round Bar Concave and Extended WearSeparator PackageIncludes: Heat-treated Round Bar Concaves (all three sections), Extended Wear ThreshingElements, Separator Tines and Rotor Top Covers.Use for multi-crop harvesting.

1,668.00

CHAFFER/SIEVE TYPE3510 General Purpose Adjustable Chaffer and Bottom Sieve Same Price

3530 Deep Tooth Adjustable Chaffer and Bottom SieveNot recommended for use in food corn, popcorn or small grains.

In Base Price

3535 SLS - Automatic Self Leveling Shoe with Deep Tooth Adjustable Chaffer and Bottom SieveNot recommended for use in food corn, popcorn or small grains.Provides automatic cleaning shoe leveling on slopes up to 14% (8 degrees).

7,044.00





SUGGESTEDLIST PRICE

USD ($)

CHAFFER/SIEVE TYPE ...Continued...Requires TouchSet.Note: Not available for Russia and JDIN.

3515 SLS - Automatic Self Leveling Shoe with General Purpose Adjustable Chaffer and BottomSieveProvides automatic cleaning shoe leveling on slopes up to 14% (8 degrees).Requires TouchSet.Note: Not available for Russia and JDIN.

7,044.00

GRAIN HANDLING SYSTEM3710 General Purpose/Regular-Duty Clean Grain Elevator, Grain Tank

Vertical Unloading Auger and Cross AugersIn Base Price

3730 Extended Wear Grain Handling SystemIncludes: Stainless Steel Clean Grain Elevator, Stainless Steel Grain Tank Cross AugerTroughs and Charge Housing, Stainless Steel Grain Tank Loading Auger Housing, HeavyDuty Grain Tank Cross Augers and Vertical Unloading Auger.

3,589.00

UNLOADING AUGERS3900 General Purpose Grain Handling System with Standard Unloading Rate and

15.5 Ft. (4.8M) 1-Piece Unloading Auger with Boot removed (Export only)-385.00

3904 General Purpose Grain Handling System with Standard Unloading Rate and18.5 Ft. (5.6M) Unloading Auger

In Base Price

3906 General Purpose Grain Handling System with Standard Unloading Rate and18.5 Ft. (5.6M) 1-Piece Unloading Auger with Boot removed(Export only - Not for Turkmenistan)

129.00

3912 General Purpose Grain Handling System with Standard Unloading Rate and18.5 Ft. (5.6M) Perforated Unloading Auger (Not available for Export)

439.00

3920 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) Unloading Auger (Not available for Export)

788.00

3924 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 2-Piece Unloading Auger (Export only)

1,806.00

3928 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) Perforated Unloading Auger

1,184.00

RESIDUE DISPOSAL4100 Less Residue (Export only) -9,841.00

4160 Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with IntegratedChaff Spreader and Single-Point Adjustable Knife Bank

In Base Price

4190 Wide-Spread, Twin Disk Straw Spreader with Integrated Chaff Spreader,Barrier Hoops and In-Cab Variable Speed ControlRecommended for Platforms 30 Ft. and less. Not available with Export Tow Hitch OptionCodes 7500.

-4,088.00

DRIVE WHEELS AND TIRES





SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS AND TIRES ...Continued...Important Note:Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,Ballast recommendations and detailed Header Compatibility information.

For Codes 4622, 4624, 4643, 4562 and 4567 below, High Flotation Tires include a LadderLanding Extension which will cause ladder interference with the uncut crop when harvestingwith 6 Row Narrow or smaller heads.

For tire preference choice, see "Attachments - Order as Desired, Tire Brand Preference"listing.-Tires are available in Firestone or Goodyear unless otherwise noted.-If only one tire brand is listed, then code 9988 (No Brand Preference) is required.-If a tire preference code is NOT chosen, then code 9988 (No Brand Preference) is assumedand the brand is determined by the factory.-Steering tire brand preference is determined by drive tire and brand preference choice.

For Header Sizes up to and including 8-Row Corn, 15 Ft. Belt Pickup,30 Ft. Flexible, 30 Ft. Rigid, and 30 Ft. Draper Platforms:

4531 30.5L-32 In. 14PR R1 In Base Price

4535 30.5L-32 In. 14PR R2 Cane and Rice 978.00

4539 800/65R32 172A8 R1 Radial (30.5LR32)Goodyear (Titan Tire) tire is 800/65R32 172A8 R1. Firestone tire is 30.5LR32 R1. If you wantone tire over the other, you need to select a tire preference. If you select no preference, youwill get one or the other.

290.00

4556 800/65R32 172A8 R1W 290.00

4560 800/70R38 173A8 R1W 2,032.00

4622 480/80R38 149A8 R1 RadialWide Spaced Duals for use in 30 In. RowsIncludes required axle spacer and ladder landing extension. Comparable to 18.4R-38.

2,479.00


8,783.00


5,859.00

Less Drive Wheels and Tires:4697 Less Drive Wheels and Tires

Includes 37 In. (940 mm) Ladder Extension. Refer to Tire Compatibility Charts for tireselections.

-4,996.00

4699 Less Drive Wheels and TiresIncludes 55 In. (1390 mm) Ladder Extension. Refer to Tire Compatibility Charts for tireselections.

-4,587.00

REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVERefer to the Tire Compatibility Charts shown in the "Tire Information" section of theAgricultural Sales Manual to verify front-to-rear compatibility, height profile for tire, andwheel spindle selection.





SUGGESTEDLIST PRICE

USD ($)

REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE...Continued...

Rear Axle Without 4-Wheel Drive:4920 Adjustable Rear Axle with Heavy-Duty Spindles In Base Price

Rear Axle with 2-Speed, 4-Wheel Drive:4975 Adjustable Rear Axle and 2-Speed, 4-Wheel Drive

1868cc Displacement.Required in steep terrain for mobility.

20,330.00

STEERING WHEELS AND TIRESSteering tire brand preference is determined by drive tire brand preference. Tires areavailable in Firestone or Goodyear unless otherwise noted.

Refer to the Tire Compatibility Charts shown in the "Tire Information" section of theAgricultural Sales Manual to verify front-to-rear compatibility, height profile for tire, andwheel spindle selection.

For use with or without 4-Wheel Drive:5115 420/85R26 138A8 R1

Comparable to 16.9R26.In Base Price

5132 18.4-26 12PR R1 88.00

5140 480/85R26 140A8 R1Comparable to 18.4R26.

324.00

5155 18.4-30 10PR R2 Cane and RiceFor adjustable rear axle only. Available in Firestone and Goodyear brand only.

992.00

5160 480/70R30 152A8 R1WFor adjustable rear axle only.

1,010.00

5170 600/65R28 154A8 R1W 2,272.00

Less Steering Wheels and Tires:5199 Less Steering Wheels and Tires

For use with all steering tires EXCEPT 28L-26 In.-1,587.00

TEMPORARY RUST PROTECTION6700 Temporary Surface Rust/Corrosion Protection

Required for protection of combine from road salt corrosion during transport from factory inwinter months and export shipment overseas. Required for Export.

253.00

6705 Less Temporary Surface Rust/Corrosion ProtectionNot Available for Export.

In Base Price

SPECIAL EQUIPMENT - FACTORY INSTALLED7030 Engine Coolant Heater - 110 Volt (Not available for Export) 58.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...

7032 Engine Coolant Heater - 220 Volt (Export only) 90.00

7145 Feed Accelerator Slow Speed Drive320-770 RPM. Recommended for use in edible beans, food corn, or where optimum grainquality is desired. Not recommended for Rice.

406.00

7150 Clean Grain Auger and Fan Bottom Protection Shielding 250.00

7415 Fuel Filter/Water Separator, Severe DutyIn addition to Water Separator in base equipment.Recommended where fuel quality is a concern.

503.00

7470 Less TouchSet (Automatic Combine Adjustment) (Export only) -2,241.00

7500 Semi-AutoMatic Rear Hitch with Wiring Harness, allows a single operator to connect trailerto combine. (For Export Only, Not Available for Australia)Rated 3500 Kg.

873.00

7505 Manual Rear Hitch with Wiring Harness for Towing Header Trailer - (For Export Only, NotAvailable for Australia)Rated 3500 Kg.

646.00

7700 SideHill Ready Configuration for combines ordered with Dual WheelDrive TiresIncludes BH81747, less Axle Spacer and Truss Rod. Reference DTAC Solution 61907 forinformation needed for proper wheel and tire equipment in a sidehill application.Not available with Code 3535 or 3515 SLS (Self Leveling Shoe).

-1,335.00

7701 SideHill Ready Configuration for combines ordered with Single Drive TiresIncludes BH81747, 1390 mm Ladder Landing Extension and related parts. Reference DTACSolution 61907 for information needed for proper wheel and tire equipment in a sidehillapplication.Not available with Code 3535 or 3515 SLS (Self Leveling Shoe).

834.00

7705 LESS Harvest Monitor System (which includes the Mass Flow Sensor and the MoistureSensor). Export onlyIncludes factory installation of combine specific Wiring Harness and steering components forGreenStar AutoTrac System. Also includes: Mounting Bracket for Position Reciever,Mounting Bracket for GreenStar GS2 Display. Does not include Mass Flow Sensor or CropMoisture Sensor. (Export only)

-2,657.00

ATTACHMENTS - ORDER AS DESIRED- FIELD INSTALLEDOPTIONS

Customer Gold Key Programs:9076 Gold Key Customer Experience Tour

This personal guided tour provides you with the unique opportunity to watch a similar machineto the one you are purchasing during its final stages of manufacturing. This tour will bescheduled in advance and can occur at your convenience during a 60 day window (30 daysprior to or 30 days after your machine#s expected warehouse date). For more information,visit www.deere.com/goldkey.

No Charge





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS - ORDER AS DESIRED- FIELD INSTALLEDOPTIONS ...Continued...

Ag Management Solutions:9001 GreenStar 2, SF2 AutoTrac (Platform-Specific) and Harvest Doc Package for Ukraine,

Kazakhstan, and South Africa - Includes GreenStar Harvest Monitor, Harvest Doc, AutoTracSF2 Activation for GS2 Display, GS2 2600 Display and SF2 Ready StarFire Receiver withterrain compensationFactory installation of combine specific wiring harness, steering components for AutoTracSystem, mounting bracket for StarFire Receiver, mounting bracket for GS2 2600 Display, MassFlow Sensor and Crop Moisture Sensor. The GS2 2600 Display and StarFire Receiver aresupplied in a bundle with the combine for dealer installation and activation. An SF2subscription, purchased separately, is required to operate SF2 AutoTrac. AutoTrac forcombines will not provide row following capability for harvesting corn unless operated with a600C Corn Head equipped with the row guidance feature ordered separately from AMS.Available for Ukraine, Kazakhstan, and South Africa only.

18,330.00

9002 GreenStar 2, SF2 AutoTrac and Harvest Doc Package for Argentina and Mexico - IncludesGreenStar Harvest Monitor, Harvest Doc, AutoTrac SF2 Activation, GS2 2600 Display andSF2 Ready StarFire Receiver with terrain compensationFactory installation of combine specific wiring harness, steering components for AutoTracSystem, mounting bracket for StarFire Receiver, mounting bracket for GS2 2600 Display, MassFlow Sensor and Crop Moisture Sensor. The GS2 2600 Display and StarFire Receiver aresupplied in a bundle with the combine for dealer installation and activation. An SF2subscription, purchased separately, is required to operate SF2 AutoTrac. AutoTrac forcombines will not provide row following capability for harvesting corn. Available forArgentina and Mexico only.

18,330.00

9003 GreenStar 2, SF2 AutoTrac (Platform-Specific) and Harvest Doc Package LESS StarFireReceiver for Russia only - Includes GreenStar Harvest Monitor, Harvest Doc, AutoTrac SF2Activation for GS2 Display and GS2 2600 DisplayFactory installation of combine specific wiring harness, steering components for AutoTracSystem, mounting bracket for StarFire Receiver, mounting bracket for GS2 2600 Display, MassFlow Sensor and Crop Moisture Sensor. The GS2 2600 Display is supplied in a bundle withthe combine for Dealer installation and activation. An SF2 subscription, purchasedseparately, is required to operate SF2 AutoTrac. AutoTrac for combines will not provide rowfollowing capability for harvesting corn unless operated with a 600C Corn Head equippedwith the row guidance feature ordered separately from AMS. StarFire Receiver to be orderedseparately. Available for Russia only.

13,619.00

Cab and Controls:9010 Power Adjust Heated Rear View Mirrors

For 60 and 70 Series Combines (PIN 715301 and Up).683.00

9020 Video Camera Observation System (NTSC System)Includes: Mounting Brackets, Harnessing, Color Visual Display and two Video Cameraswhich can be mounted on the Unloading Auger, in the Grain Tank, or the rear of the combineto observe combine functions as desired.System is self-contained. However, if PAL is preferred, order BZ100067 from EPDC Europe.

2,511.00

Cutting and Feeding:9030 Feed Accelerator Slow Speed Drive

320-770 RPM. Recommended for use in edible beans, food corn or where optimum grainquality is desired. Not recommended for use in Rice.

1,496.00

Threshing:9200 Concave Cover Plates (Set of 3) for Large Wire and

Small Wire Concaves onlyFor additional threshing in hard to thresh crops. For 9560 STS and 9570 STS Combines.

248.00





SUGGESTEDLIST PRICE

USD ($)


9220 Additional Threshing Concave Insert Bars for RoundBar Concaves (Set of 2)One set required per concave section. Use if harvesting small grains with Round BarConcaves.

663.00

9230 Extended Wear (Heat-Treated) Round Bar Concaves (Set of 3)Recommended for corn and soybeans. Use in high yielding or abrasive conditions.

2,839.00

9240 Small Wire Concaves (Set of 3)Not recommended for corn.

2,941.00

9250 Large Wire Concaves (Set of 3)Recommended for use in sorghum and soybeans.

2,694.00

Cleaning:9346 SideHill Performance Package

Helps reduce losses on slopes. Includes full-length tall chaffer dividers, two grain return panpartitions, two grain conveyor auger bed extensions, and grain agitator paddles. Not for usewith Code 3535 or 3515.

432.00

Grain Handling:9510 Perforated Elevator Boots, Doors, and Clean Grain Cross Auger Trough

Not for use with Code 7150.319.00

9530 Additional "Full" Grain Tank SensorFor sidehill applications.

178.00

Axles and Wheels:Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,Ballast recommendations and detailed Header Compatibility information.

Spacers:All spacers, except Code 9710, include required Ladder Extension.

9710 4 In. (100 mm) Wheel Hub Spacer (no Ladder Extension) 672.00

9725 4 In. (105 mm) Axle SpacerFor increased mud clearance.

1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00

Tire Brand Preference:Tire brand preference choice is for both front and rear tires.Rear tire brand is determined by front drive tire preference choice.

9988 No Brand PreferenceRequired if only one brand of drive tire is listed.

No Charge





SUGGESTEDLIST PRICE

USD ($)


9992 Firestone Brand PreferredThis Code is not required if Firestone is the only brand listed for drive tire. Use Code 9988.

524.00

9993 Goodyear Brand PreferredThis Code is not required if Goodyear is the only brand listed for drive tire. Use Code 9988.

524.00

Operator's Manuals:9804 Portuguese Operator's Manual (Export only) No Charge

9805 French Operator's Manual/French Decals No Charge

9809 Russian Operator's Manual (Export only) No Charge

9810 Spanish Operator's Manual/Spanish Decals No Charge

9815 Hebrew Operator's Manual (Export only) No Charge

9819 Chinese Operator's Manual (Export only) No Charge

9825 Arabic Operator's Manual (Export only) No Charge

ATTACHMENTS FOR FIELD CONVERSION

2-Speed, 4-Wheel Drive Conversions:BH90116 1886cc 2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 715000 - 730100)

For 9570 and S560 Combines. 2-Wheel Drive Axles have a different wheel bolt pattern than isused on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel Drive Wheel Rims arerequired when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed, 4-Wheel Drive Rimsthrough Service Parts.

25,533.00

Cab and Controls:BH84485 Power Adjust Heated Rear View Mirrors


BH90100 TouchSet Automatic Combine Adjustment for 60 and 70 SeriesCombines only with TouchSet In-Cab DisplayIncludes: TouchSet Cornerpost Display, Wiring Harness, Actuators for Chaffer and Sieve,Ground Level Activation Switches, Circuit Board, Wedge Box and Software. Requires Chafferand Sieve elements for use with TouchSet Remote Shoe Feature. Order through Service Parts.

1,848.00

BH84475 Video Camera Observation System (NTSC System)Includes: Mounting Brackets, Harnessing, Color Visual Display and two Video Cameraswhich can be mounted on the Unloading Auger, in the Grain Tank, or the rear of the combineto observe combine functions as desired.System is self-contained. However, if PAL is preferred, order BZ100067 from EPDC Europe.

2,511.00

BH84043 Windshield Washer for 60 and 70 Series Combines 193.00

Cleaning:AH213860 10 mm Fixed Round Hole Sieve See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AH213857 3 mm Fixed Round Hole Sieve See Parts

BH90073 Clean Grain Auger and Fan Bottom Protection ShieldingFor 9560 STS and 9570 STS Combines only.

237.00

AH212260 Deep Tooth ChafferFor 9560 STS and 9570 STS.For use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Sieve. Not recommended for use in food corn, popcorn or small grains. Forcombines without TouchSet Remote Combine Adjustment.

See Parts

AH212261 Deep Tooth SieveFor 9560 STS and 9570 STS.For use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Chaffer. Not recommended for use in food corn, popcorn, or small grains. Forcombines without TouchSet Remote Combine Adjustment.

See Parts

BXE10019 SideHill Performance PackageHelps reduce losses on slopes. Includes full-length tall chaffer dividers, two grain return panpartitions, two grain conveyor auger bed extensions, and grain agitator paddles. Not for usewith Code 3535 or 3515.

432.00

Cutting and Feeding:BH84027 Contoured Serrated Feed Accelerator Wings

Provides fast yet gentler handling than the standard Serrated Wear Strips. Recommended whenharvesting viney crops such as edible beans.

872.00

BH84497 Expanded Stone Trap Door with two-piece feed floor for improved rockprotection for 9560 STS and 9570 STS Combines (PIN 720101 and ABOVE).May reduce capacity in tough green stemmed crops.

1,095.00

BH81691 Feed Accelerator Slow Speed Drive320-770 RPM. Recommended for use in edible beans, food corn or where optimum grainquality is desired. Not recommended for use in Rice.

1,496.00

BH81489 Feed Accelerator Smooth Wear Strips (Set of 30)For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops suchas popcorn, food corn, etc.

290.00

BH84479 Feederhouse Drive Oil CoolerFor PIN 700801 and above.

1,054.00

BH84533 HarvestSmart Feedrate Control System - provides automatic combine groundspeed control to maintain a consistent crop load (feedrate) through the combinefor increased productivity, lower loss levels, and reduced operator fatigueFor 9570 STS with 105cc hydro, 9670 STS, 9770 STS and 9870 STS. Requires softwareupdates through Service Advisor. HarvestSmart is not recommended for use in harvestingoperations that are consistently limited by header capability and is not recommended for use invery muddy conditions or where sidehill losses are the limit of combine capacity.

9,192.00

Grain Handling:BH81598 Additional "Full" Grain Tank Sensor

For sidehill applications.178.00

BH80611 Perforated Elevator Boots, Doors, and Clean Grain Cross Auger TroughNot for use with Code 7150.

288.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH90075 Perforated Elevator Boots, Doors, and Clean Grain Cross Auger Trough


BH84034 Slow Speed Clean Grain Elevator DriveReduces speed of Clean Grain Elevator from 400 RPM to 250 RPM. Recommended for ediblebeans or soybeans only. Not recommended for crops in excess of 50 bushel/acre yield. Refer tothe Agricultural Sales Manual for additional ordering information and GreenStar limitations.

447.00

H86760 Steel Paddle Tailing Elevator for all 50 Series, 60 Seriesand 70 Series Combines (Parts)

See Parts

H229907 Steel Paddle Tailing Elevator for all 9770 STS, 9870 STS and S690 Combines See Parts

Ladder Extensions:BH80980 37 In. (940 mm) Ladder Extension

Includes Warning Lamps and Brackets.1,044.00

BH80964 55 In. (1390 mm) Ladder ExtensionIncludes Warning Lamps and Brackets.

1,359.00

Lighting:BH84557 FieldVision Xenon HID Lighting Package

For 60 and 70 Series Combines (PIN 715301 and Up). Increases illumination for nighttimeoperations.

825.00

BH84501 Service Lights 624.00

Residue Disposal:BH84554 Electric Tailboard to convert Manual Adjust Chopper Tailboard to Electrically Adjusted

Chopper TailboardFor 9570 STS. For Export Only.

1,368.00

Spacers:BH80839 12 In. (300 mm) Axle Spacer

For 36 In. rows with 24.5-32 In. Tires. Requires 55 In. (1390 mm) Ladder Extension.1,891.00

BH80836 16 In. (400 mm) Axle SpacerFor 36 In. and 38 In. rows with 30.5L-32 In. 14PR, 800/65R32 and 900/65R-32 In. Tires.Requires 55 In. (1390 mm) Ladder Extension.

1,949.00

BH80837 18 In. (454 mm) Axle SpacerFor 40 In. rows with 30.5L-32 In. 14PR Drive Tires. Requires 55 In. (1390 mm) LadderExtension. For 38 In. and 40 In. rows with 24.5L-32 In. Drive Tires. Requires 55 In. (1390mm) Ladder Extension.

2,202.00

BH90109 4 In. (100 mm) Wheel Hub Spacer (No Ladder Extension)For 9560 STS, 9570 STS, 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860STS and 9870 STS Combines with Heavy-Duty Final.

672.00

BH80985 4 In. (105 mm) Axle SpacerFor extra mud clearance. Requires 37 In. (940 mm) Ladder Extension.

1,474.00

BH84364 6.5 In. (165 mm) Axle Spacer 1,811.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...

Steering Wheels and Tires for 2-Speed, 4-Wheel Drive Only:BH84261 600/65R28 147A8 R1W

Steering Wheels and Tires for 2-Speed, 4-Wheel DriveThe 600/65R28 does not sit exactly on 30 In. rows. 30 In. row spacing = 120 In., 600/65R282WD = 125.5 In., and 600/65R28 4WD = 128 In.

5,617.00

Steering Wheels and Tires for use without 2-Speed, 4-Wheel Drive:BH84262 600/65R28 147A8 R1W

For all 50, 60 and 70 Series Combines.For use with 1600cc 4-Wheel Drive, or 2-Wheel Drive Axle with Heavy Duty Rear Spindleonly.The 600/65R28 does not sit exactly on 30 In. rows. 30 In. row spacing = 120 In., 600/65R282WD = 125.5 In., and 600/65R28 4WD = 128 In.

5,617.00

Threshing:BH84294 Additional Threshing Concave Insert Bars for Round

Bar Concaves (Set of 2)One set required per concave section. Use if harvesting small grains with Round BarConcaves.

663.00

BH84293 Concave Cover Plates (Set of 3) for Large Wire andSmall Wire Concaves onlyFor additional threshing in hard to thresh crops. For 9560 STS and 9570 STS Combines.

248.00

BH84291 Extended Wear (Heat-Treated) Round Bar Concaves (Set of 3)Recommended for corn and soybeans. Use in high yielding or abrasive conditions.

2,839.00

BH84290 Large Wire Concaves (Set of 3)Recommended for use in sorghum and soybeans.

2,694.00

BH84289 Small Wire Concaves (Set of 3)Not recommended for corn.

2,941.00

BH84578 Towing Hitch for 50, 60 and 70 Series Combines. (For Export Only, Not available forAustralia)

854.00






THIS PAGE IS INTENTIONALLY LEFT BLANK


9570 STS COMBINE













Handle with Integral Buttons for:Reel Height and Fore/Aft RemoteReel Control or FeederhouseBackshaft Speed2-Speed Header Raise and Lower

Contour-Master Tilt Control3-Position Header Height and

Reel Resume5-Position Unloading Auger Swing and





Multi-Function CommandTouch CornerPost Display with:3-Line Digital TachometerVisionTrak Grain Loss

and Tailings MonitorActive Header Control and Header


3-Position Header Height Resume, ReelResume, Active Header Float Systemand Header Height Sensing System



Turn Signals (4)

Rotating beacon lights with Grain Cart Call (3)SideFinder Lights (2)Cleaning Shoe LightsExit LightingRear Residue Discharge Lights (2)Stubble Lights (2)Deceleration Warning Light

FEEDERHOUSE:Standard Duty FeederhouseContour-Master Feederhouse with Reverser and

Heavy-Duty Variable Speed Drive System (Corn)Level Land Feederhouse with Reverser and

Fixed Speed Drive System (Small Grain)17 Degree Fore/Aft Adjustable

Front Tilt FrameHeavy-Duty Reverser with Push Button

Electro-Hydraulic Shift EngagementSingle-Point Electric Hydraulic Hookup

and Latching System2-Speed Feeder ChainFront Drum Side Shields

THRESHING AND SEPARATING:Bullet Rotor Threshing Technology

24 In. Diameter (600 mm) Feeding andThreshing Section


Total Rotor Length of 124.5 In. (3164 mm)Feed Accelerator 10-Wing 17 In. Diameter

(420 mm) with 2-Speed Drive (440/800 RPM)Stone Trap with Remote Dump5 Wings 17 In. Diameter (420 mm)



(Small Grain)15 Threshing Bars16 Open Row Separator Grates

1.3 Sq. Meter Total AreaDischarge Beater Grate 0.3 Sq.Meter Total Area




Deep Tooth Remote Adjustable Chafferand Sieve (Corn)

General Purpose Remote Adjustable Chafferand Sieve (Small Grain)Non-Adjustable Front Chaffer

Separator Air Discharge Chute Agitators



GRAIN HANDLING:250 Bushel (8850L) Grain Tank2.2 Bushels Per Second (average),





PowerTech Plus Diesel Engine Technology


9570 STS Small Grain Combine (Model Year 2011)Equipment for Base Machine


with TurboCharger and Air-to-AirAftercooler265 Hp (198 KW) at 2400 RPM,284 Hp Max Power Bulge at 2400 RPM and294 Hp Max Unloading Power Boost



Drive BeltsStandard Capacity Engine Pre-Cleaner and

Air Cleaner Filter SystemHigh Capacity Wide Spaced Tube RadiatorAir Scoop Cooling TechnologyExport Complaint Power unit. (Export only exceptAustralia and Mexico)

WHEELS AND DRIVES:30.5L-32 In. 14PR Cleat (R1)

Drive Wheels and Tires16.9R-26 In. Two Star Cleat (R1)

Steering Wheels and TiresHeavy-Duty (105cc High-Torque) Variable

Speed Hydrostatic Ground Drive Systemwith 3-Speed Transmission (20K Transmission -Export Russia only)

Heavy-Duty Final DriveAdjustable Rear Axle with Heavy-Duty

Spindles







Extend Battery Posts and Cut-Off Switch











SUGGESTEDLIST PRICE

USD ($)



160LH 9570 STS Small Grain Combine (Model Year 2011)For use with Non-StalkMaster Corn Heads up to 8 Rows, StalkMaster Corn Heads up to 6Rows, Platforms up to 30 Ft., Draper Platforms up to 30 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms or size.

258,985.00

VALUE PACKAGE CONFIGURATIONS0599 No Package

Order one code from each box in price pages.In Base Price


Includes base cab with windshield washer and radio ready (two pre-wired speakers andIn Base Price


9570 STS Small Grain Combine (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)

CAB TYPE ...Continued...antenna).


1,113.00


3,564.00


3,032.00

FEEDERHOUSE TYPE1510 Level Land Feederhouse with Reverser and Regular-Duty Variable

Speed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 6 Rows and less, Rigid Platforms 30Ft. and less, 25 Ft. Draper Platform, and the 615 Belt Pickup.

2,378.00

1520 Level Land Feederhouse with Reverser and Heavy-Duty VariableSpeed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 8 Rows and less, StalkMaster CornHeads 6 Rows and less, Rigid Platforms 30 Ft. and less, 25 Ft. Draper Platform, and the 615Belt Pickup.

3,843.00

1530 Level Land Feederhouse with Reverser and Fixed Speed Drive SystemRecommended for use with Rigid Platforms 30 Ft. and less, 25 Ft. Draper Platform, and the615 Belt Pickup.

In Base Price

1560 Contour-Master Feederhouse with Reverser and Heavy-Duty VariableSpeed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 8 Rows and less, StalkMaster CornHeads 6 Rows and less, Flex Platforms 30 Ft. and less, Rigid Platforms 30 Ft. and less, 25 Ft.Draper Platform, and the 615 Belt Pickup. Contour-Master is recommended to maximizeperformance of 600D Draper Platforms when operating in rolling terrain.

9,693.00

FEEDERHOUSE LIFT CYLINDERS1720 2.75 In. (70 mm) Feederhouse Lift Cylinders In Base Price



In Base Price


8,356.00





SUGGESTEDLIST PRICE

USD ($)

COMBINE/HEADER CONTROL SYSTEMS ...Continued...


Regular Duty Concaves:2810 Small Wire Concave (Not available for Australia)

All three concave sections heat-treated.Use for small grain harvesting.

In Base Price


2830 Extended Wear Small Wire Concave and Extended Wear Separator Package(Not available for Australia)Includes: Extended Wear (boronized) Small Wire Concaves, Extended Wear ThreshingElements, Separator Tines and Rotor Top Covers.

3,475.00

CHAFFER/SIEVE TYPE3510 General Purpose Adjustable Chaffer and Bottom Sieve In Base Price


7,044.00

GRAIN HANDLING SYSTEM3710 General Purpose/Regular-Duty Clean Grain Elevator, Grain Tank

Vertical Unloading Auger and Cross AugersIn Base Price

3730 Extended Wear Grain Handling SystemIncludes: Stainless Steel Clean Grain Elevator, Stainless Steel Grain Tank Cross AugerTroughs and Charge Housing, Stainless Steel Grain Tank Loading Auger Housing, HeavyDuty Grain Tank Cross Augers and Vertical Unloading Auger.

3,589.00

UNLOADING AUGERS3900 General Purpose Grain Handling System with Standard Unloading Rate and

15.5 Ft. (4.8M) 1-Piece Unloading Auger with Boot removed (Export only)-385.00

3904 General Purpose Grain Handling System with Standard Unloading Rate and18.5 Ft. (5.6M) Unloading Auger

In Base Price

3906 General Purpose Grain Handling System with Standard Unloading Rate and18.5 Ft. (5.6M) 1-Piece Unloading Auger with Boot removed(Export only - Not for Turkmenistan)

129.00





SUGGESTEDLIST PRICE

USD ($)

UNLOADING AUGERS ...Continued...3912 General Purpose Grain Handling System with Standard Unloading Rate and

18.5 Ft. (5.6M) Perforated Unloading Auger (Not available for Export)439.00

3920 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) Unloading Auger (Not available for Export)

788.00


1,806.00

3928 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) Perforated Unloading Auger

1,184.00



In Base Price


-4,088.00

DRIVE WHEELS AND TIRESImportant Note:Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,Ballast recommendations and detailed Header Compatibility information.




4531 30.5L-32 In. 14PR R1 In Base Price

4535 30.5L-32 In. 14PR R2 Cane and Rice 978.00

4539 800/65R32 172A8 R1 Radial (30.5LR32)Goodyear (Titan Tire) tire is 800/65R32 172A8 R1. Firestone tire is 30.5LR32 R1. If you wantone tire over the other, you need to select a tire preference. If you select no preference, youwill get one or the other.

290.00

4556 800/65R32 172A8 R1W 290.00

4560 800/70R38 173A8 R1W 2,032.00





SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS AND TIRES ...Continued...4622 480/80R38 149A8 R1 Radial

Wide Spaced Duals for use in 30 In. RowsIncludes required axle spacer and ladder landing extension. Comparable to 18.4R-38.

2,479.00


8,783.00


5,859.00



-4,996.00


-4,587.00




1868cc Displacement.Required in steep terrain for mobility.

20,330.00





5132 18.4-26 12PR R1 88.00


324.00





SUGGESTEDLIST PRICE

USD ($)

STEERING WHEELS AND TIRES ...Continued...5155 18.4-30 10PR R2 Cane and Rice

For adjustable rear axle only. Available in Firestone and Goodyear brand only.992.00


1,010.00

5170 600/65R28 154A8 R1W 2,272.00





253.00


In Base Price




406.00


7415 Fuel Filter/Water Separator, Severe DutyIn addition to Water Separator in base equipment.Recommended where fuel quality is a concern.

503.00


7500 Semi-AutoMatic Rear Hitch with Wiring Harness, allows a single operator to connect trailerto combine. (For Export Only, Not Available for Australia)Rated 3500 Kg.

873.00

7505 Manual Rear Hitch with Wiring Harness for Towing Header Trailer - (For Export Only, NotAvailable for Australia)Rated 3500 Kg.

646.00


-1,335.00

7701 SideHill Ready Configuration for combines ordered with Single Drive TiresIncludes BH81747, 1390 mm Ladder Landing Extension and related parts. Reference DTACSolution 61907 for information needed for proper wheel and tire equipment in a sidehill

834.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...application.Not available with Code 3535 or 3515 SLS (Self Leveling Shoe).


-2,657.00




No Charge



18,330.00


18,330.00


13,619.00





SUGGESTEDLIST PRICE

USD ($)





2,511.00



1,496.00

Threshing:9200 Concave Cover Plates (Set of 3) for Large Wire and

Small Wire Concaves onlyFor additional threshing in hard to thresh crops. For 9560 STS and 9570 STS Combines.

248.00


663.00


2,839.00

9240 Small Wire Concaves (Set of 3)Not recommended for corn.

2,941.00


2,694.00



432.00




178.00





SUGGESTEDLIST PRICE

USD ($)


Axles and Wheels:Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,Ballast recommendations and detailed Header Compatibility information.




1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00













SUGGESTEDLIST PRICE

USD ($)



For 9570 and S560 Combines. 2-Wheel Drive Axles have a different wheel bolt pattern than isused on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel Drive Wheel Rims arerequired when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed, 4-Wheel Drive Rimsthrough Service Parts.

25,533.00




1,848.00


2,511.00



AH213857 3 mm Fixed Round Hole Sieve See Parts

BH90073 Clean Grain Auger and Fan Bottom Protection ShieldingFor 9560 STS and 9570 STS Combines only.

237.00

AH212260 Deep Tooth ChafferFor 9560 STS and 9570 STS.For use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Sieve. Not recommended for use in food corn, popcorn or small grains. Forcombines without TouchSet Remote Combine Adjustment.

See Parts

AH212261 Deep Tooth SieveFor 9560 STS and 9570 STS.For use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Chaffer. Not recommended for use in food corn, popcorn, or small grains. Forcombines without TouchSet Remote Combine Adjustment.

See Parts

BXE10019 SideHill Performance PackageHelps reduce losses on slopes. Includes full-length tall chaffer dividers, two grain return panpartitions, two grain conveyor auger bed extensions, and grain agitator paddles. Not for usewith Code 3535 or 3515.

432.00


Provides fast yet gentler handling than the standard Serrated Wear Strips. Recommended whenharvesting viney crops such as edible beans.

872.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84497 Expanded Stone Trap Door with two-piece feed floor for improved rock

protection for 9560 STS and 9570 STS Combines (PIN 720101 and ABOVE).May reduce capacity in tough green stemmed crops.

1,095.00


1,496.00

BH81489 Feed Accelerator Smooth Wear Strips (Set of 30)For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops suchas popcorn, food corn, etc.

290.00


1,054.00


9,192.00




288.00


319.00


447.00


See Parts





1,359.00



825.00






SUGGESTEDLIST PRICE

USD ($)


Residue Disposal:BH84554 Electric Tailboard to convert Manual Adjust Chopper Tailboard to Electrically Adjusted

Chopper TailboardFor 9570 STS. For Export Only.

1,368.00

Spacers:BH80839 12 In. (300 mm) Axle Spacer

For 36 In. rows with 24.5-32 In. Tires. Requires 55 In. (1390 mm) Ladder Extension.1,891.00

BH80836 16 In. (400 mm) Axle SpacerFor 36 In. and 38 In. rows with 30.5L-32 In. 14PR, 800/65R32 and 900/65R-32 In. Tires.Requires 55 In. (1390 mm) Ladder Extension.

1,949.00


2,202.00


672.00

BH80985 4 In. (105 mm) Axle SpacerFor extra mud clearance. Requires 37 In. (940 mm) Ladder Extension.

1,474.00




5,617.00



5,617.00



663.00

BH84293 Concave Cover Plates (Set of 3) for Large Wire andSmall Wire Concaves onlyFor additional threshing in hard to thresh crops. For 9560 STS and 9570 STS Combines.

248.00


2,839.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84290 Large Wire Concaves (Set of 3)

Recommended for use in sorghum and soybeans.2,694.00

BH84289 Small Wire Concaves (Set of 3)Not recommended for corn.

2,941.00


854.00




9670 STS COMBINE













Handle with Integral Buttons for:Reel Height and Fore/Aft Remote Reel

Control or Feederhouse Backshaft Speed2-Speed Header Raise and Lower

Contour-Master Tilt Control3-Position Header Height and Reel Resume5-Position Unloading Auger Swing and





Multi-Function CommandTouch Corner PostDisplay with:3-Line Digital TachometerVisionTrak Grain Loss and

Tailings MonitorActive Header Control and Header


3-Position Header Height Resume,Reel Resume, Active HeaderFloat System and Header HeightSensing System



Turn Signals (4)Rotating beacon lights with Grain Cart Call (3)

SideFinder Lights (2)Cleaning Shoe Lights (2)Exit LightingRear Residue Discharge Lights (2)Stubble Lights (2)Deceleration Warning Light

FEEDERHOUSE:Heavy-Duty 4x4 Feederhouse (compatible with 40 ft.header equipment)Contour-Master Feederhouse with Reverser and

Heavy-Duty Variable Speed Drive System (Corn)Contour-Master Feederhouse with Reverser and

High-Torque Fixed Speed Drive System (SmallGrain)

Level Land Feederhouse with Reverser andFixed Speed Drive System (Rice)

Heavy-Duty Front Drum17 Degree Fore/Aft Adjustable

Front Tilt FramePush Button Electro-Hydraulic Shift

Feederhouse Reverser EngagementSingle-Point Header Latching and

Electric Hydraulic Hookup2-Speed Feeder Chain

(Corn and Small Grain)(Rice)Front Drum Side Shields

THRESHING AND SEPARATING:Bullet Rotor Threshing Technology15 Threshing Elements (Corn and Small Grain)Single Tine Separator (STS)

30 In. Diameter (762 mm) Feedingand Threshing Section


Total Rotor Length of 123 In. (3124 mm)Feed Accelerator 10-Wing 17 In.(420 mm) Diameter

with Heavy-Duty, 2-Speed Drive440/800 RPM (Corn and Grain)510/1000 RPM (Rice)

Multi-Serrated Feed Accelerator (Rice)Stone Trap with Remote Dump5 Wings 17 In. Diameter (420 mm)



(Small Grain)Large Wire Concave (Rice)19 Open Row Separator Grates 1.54 Sq.

Meter Total Area (Small Grainincludes 20 Separator Grate Covers)

Discharge Beater Grate 0.36 Sq. MeterTotal Area


CLEANING:2-Stage Dyna-Flo II Plus Cleaning System has:


Deep Tooth Remote Adjustable Chaffer andSieve (Corn)

General Purpose Remote AdjustableChaffer and Sieve (Small Grainand Rice)

Non-Adjustable Front ChafferSeparator Air Discharge Chute Agitators


Chopper with Integrated Chaff Spreaderand Single-Point Adjustment Knife Bank




GRAIN HANDLING:Corn and Small Grain Combine:

300 Bushel (10,572L) Grain TankGeneral Purpose Grain Handling SystemHigh Capacity 3.3 Bushels Per Second

(average), 3.6 Bushels Per Second(instantaneous), Unloading Systemwith 22.5 Ft. (6.9M) Unloading Auger


Manual Folding Grain Tank Loading AugerRice Combine:

300 Bushel (10,572L) Grain TankExtended Wear Grain Handling SystemHigh Capacity 3.3 Bushels Per Second





PowerTech Plus Diesel Engine Technologywith TurboCharger and Air-to-AirAftercooler305 Hp at 2200 RPM326 Hp Max Power Bulge at 2100 RPM338 Hp Max Unloading Power Boost



Drive BeltsHigh Capacity Wide Spaced Tube Radiator and

Air Scoop Cooling TechnologyHigh Capacity Engine Pre-Cleaner

and Air FilterExport Complaint Power unit. (Export only exceptAustralia and Mexico)

WHEELS AND DRIVES:30.5LR-32 In. Three Star (R1) Radial

Drive Tires18.4R-26 In. 2 Star (R1)

Steering TiresHeavy-Duty (105cc High-Torque) Variable

Hydrostatic Ground Drive with3-Speed Transmission (20K Transmission - ExportRussia only)

Heavy-Duty Final Drive (Corn andSmall Grain)

High Clearance Heavy-Duty FinalDrive (Rice)

Adjustable Rear Axle with Heavy-DutySpindles (Corn and Small Grain)

Adjustable Rear Axle with 2-Speed,4-Wheel Drive (2100cc Displacement) Rice)







External Battery Posts and Cut-off Switch











SUGGESTEDLIST PRICE

USD ($)



161KH 9670 STS Corn Combine (Model Year 2011)For use with Non-StalkMaster Corn Heads up to 12 Rows, StalkMaster Corn Heads up to 8Rows, Platforms up to 35 Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms or size (i.e. 12 Row Non-StalkMaster

307,520.00





SUGGESTEDLIST PRICE

USD ($)

BASE MACHINE ...Continued...Corn Heads, 8 Row StalkMaster Corn Heads, or 635 Flex).


Corn and Soybean Packages:0501 Performance

>> Corn and Soybean Customer> High yielding or high moisture corn

>> Not recommended for use in small grains**IF GREENSTAR DISPLAY IS REQUIRED, ORDER DIRECTLY FROM AMS**

Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2805) Round Bar Concave(3530) Deep Tooth Chaffer and Sieve(3825) General Purpose Grain Handling System with High Capacity

Unloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated


-705.00

0503 Performance Plus>> Corn and Soybean Customer

> High yielding or high moisture corn> Requires the advantages of extended wear components


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2825) Extended Wear Round Bar Concave and Extended Wear

Separator Package(3530) Deep Tooth Chaffer and Sieve(3835) Extended Wear Grain Handling System with High Capacity



-1,411.00





SUGGESTEDLIST PRICE

USD ($)

VALUE PACKAGE CONFIGURATIONS ...Continued...0533 Performance Plus with SLS

>> Corn and Soybean Customer> High yielding or high moisture corn> Requires the advantages of extended wear components> Operating on slopes


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3535) Deep Tooth Chaffer and Sieve with SLS(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00

0504 Performance Plus Custom>> Custom Cutter or Small Grain, Corn and Soybean Customer

> Requires small grain harvesting capability> Requires advantages of extended wear components


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2832) Factory installed Extended Wear Small Wire Concave and Extended

Wear Separator Package (includes 20 Separator Grate Coversand Extended Wear Round Bar Concaves for field installation)

(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High Capacity



-1,411.00

0505 Performance Plus with Spreader>> Corn and Soybean Customer

> High yielding or high moisture corn> Requires the advantages of extended wear components> Does not chop residue


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2825) Extended Wear Round Bar Concave and Extended Wear


Unloading System and 22.5 Ft. One-Piece Unloading Auger(4190) Wide-Spread, Twin Disk Straw Spreader with Integrated Chaff

Spreader, Barrier Hoops and In-Cab Variable Speed Control

-1,411.00





SUGGESTEDLIST PRICE

USD ($)

VALUE PACKAGE CONFIGURATIONS ...Continued...0535 Performance Plus for Large Headers

>> Corn and Soybean Customer> High yielding or high moisture corn> Requires the advantages of extended wear components> Operating larger header equipment


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3530) Deep Tooth Chaffer and Sieve(3865) Extended Wear Grain Handling System with High CapacityUnloading System and 26 Ft. One-Piece Unloading Auger(4170) Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated Chaff Spreaderand PowerCast Powered Tailboard Residue Management System

-1,411.00

0507 Smart Performance Plus>> Corn and Soybean Customer

> High yielding or high moisture corn> Requires the advantages of extended wear components> Requires HarvestSmart Feedrate Control System


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1985) HarvestSmart Feedrate Control and Premium Header Control Package(2825) Extended Wear Round Bar Concave and Extended Wear


Unloading System and 22.5 Ft. One-Piece Unloading Auger(4170) Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated Chaff

Spreader and PowerCast Powered Tailboard Residue Management System

-2,820.00


In Base Price



In Base Price


1,113.00


3,564.00


3,032.00





SUGGESTEDLIST PRICE

USD ($)

CAB TYPE ...Continued...

FEEDERHOUSE TYPE1520 Level Land Feederhouse with Reverser and Heavy-Duty Variable

Speed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 8 Rows and less, StalkMaster CornHeads 6 Rows and less, Rigid Platforms 30 Ft. and less, Draper Platforms 25 Ft. and less, andthe 615 Belt Pickup.

-5,849.00

1525 Level Land Feederhouse with Reverser and High-TorqueVariable Speed Drive SystemRecommended for use with StalkMaster Corn Heads 8 Rows and less, Non-StalkMaster CornHeads 12 Rows and less, Flex Platforms 30 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 35 Ft. and less, and the 615 Belt Pickup. Requires Code 1730.

-4,533.00

1560 Contour-Master Feederhouse with Reverser and Heavy-Duty VariableSpeed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 8 Rows and less, StalkMaster CornHeads 6 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 35 Ft. and less, and the 615 Belt Pickup. Contour-Master is recommendedto maximize performance of 600D Draper Platforms when operating in rolling terrain.

In Base Price

1570 Contour-Master Feederhouse with Reverser and High-TorqueVariable Speed Drive SystemRecommended for use with StalkMaster Corn Heads 8 Rows and less, Non-StalkMaster CornHeads 12 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 40 Ft. and less, and the 615 Belt Pickup. Contour-Master is recommendedto maximize performance of 600D Draper Platforms when operating in rolling terrain.

1,318.00

FEEDERHOUSE LIFT CYLINDERS1720 2.75 In. (70 mm) Feederhouse Lift Cylinders

For use with Headers up to and including 8-Row Wide Corn Heads, 12-Row 22 In. CornHeads, 36 Ft. Platforms, and 35 Ft. Draper Platforms.

In Base Price

1730 3.15 In. (80 mm) Feederhouse Lift CylindersRequired for use with 12 Row StalkMaster and Non-StalkMaster Corn Heads, 35 Ft. and 40 Ft.Draper Platforms.

912.00



In Base Price


8,356.00

CONCAVES AND EXTENDED WEAR SEPARATOR PACKAGES





SUGGESTEDLIST PRICE

USD ($)

CONCAVES AND EXTENDED WEAR SEPARATOR PACKAGES...Continued...For specific recommended crop applications for each of the three type Concaves offered, referto the Agricultural Sales Manual.



In Base Price

2815 Large Wire ConcaveAll three concave sections heat-treated.

276.00



1,668.00

2828 Extended Wear Large Wire Concave and Extended Wear Separator PackageIncludes: Extended Wear (boronized) Large Wire Concaves, Extended Wear ThreshingElements, Separator Tines and Rotor Top Covers.

3,475.00

2832 Custom Cutters Extended Wear Concave and Extended WearSeparator PackageIncludes: Factory installed Extended Wear (boronized) Small Wire Concaves, Extended WearThreshing Elements, Separator Tines and Rotor Top Covers. Also includes: 20 SeparatorGrate Covers and Extended Wear Round Bar Concaves for field installation. Requires Code3510 (General Purpose Chaffer and Sieve) or Code 3515 (SLS General Purpose Chaffer andSieve).

6,683.00

CHAFFER/SIEVE TYPE3510 General Purpose Adjustable Chaffer and Bottom Sieve

Required when Code 2832 is selected and Code 3515 is not.Same Price


In Base Price

3535 SLS - Automatic Self Leveling Shoe with Deep Tooth Adjustable Chaffer and Bottom SieveNot recommended for use in food corn, popcorn or small grains.Provides automatic cleaning shoe leveling on slopes up to 14% (8 degrees).Requires TouchSet.Note: Not available for Russia and JDIN.

7,044.00

3515 SLS - Automatic Self Leveling Shoe with General Purpose Adjustable Chaffer and BottomSieveProvides automatic cleaning shoe leveling on slopes up to 14% (8 degrees). RequiresTouchSet. Not available for Export. Required when Code 2832 is selected and Code 3510 isnot.Note: Not available for Russia and JDIN.

7,044.00





SUGGESTEDLIST PRICE

USD ($)

GRAIN HANDLING AND UNLOADING SYSTEMS

General Purpose Grain Handling System with Standard (2.2 Bu/Sec)Unloading Rate and 250 Bushel Grain Tank:Includes: Regular Duty Clean Grain Elevator, Grain Tank Cross Augers and VerticalUnloading Auger, and 21.5 Ft. Unloading Auger with 2.2 Bu/Sec Unloading Rate. Notrecommended for use with 35 Ft. Flexible Platforms.

3805 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 1-Piece Unloading Auger (Not available for Export)

-4,053.00


-3,033.00

3810 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 1-Piece Perforated Unloading Auger (Not available forExport)

-3,325.00

Extended Wear Grain Handling System with Standard (2.2 Bu/Sec)Unloading Rate and 250 Bushel Grain Tank:Includes: Extended Wear Clean Grain Elevator, Grain Tank Cross Auger, Vertical UnloadingAuger, and 21.5 Ft. Unloading Auger with 2.2 Bu/Sec Unloading Rate. Not recommended foruse with 35 Ft. Flexible Platforms.

3815 Extended Wear Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 1-Piece Unloading Auger (Not available for Export)

-1,520.00

3817 Extended Wear Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 2-Piece Unloading Auger (Export only)

-499.00

General Purpose Grain Handling System with High Capacity (3.3 Bu/Sec)Unloading System, 22.5 Ft. Unloading Auger and 300 Bushel Grain TankExtension:Includes: Regular Duty Clean Grain Elevator, Grain Tank Cross Auger, Vertical UnloadingAuger, High Capacity 22.5 Ft. Unloading Auger with 3.3 Bu/Sec Unloading Rate, and 300Bushel Grain Tank. Recommended for use with 35 Ft. Flexible Platforms.

3825 General Purpose Grain Handling System with High Capacity UnloadingSystem and 22.5 Ft. (6.9M) 1-Piece Unloading Auger (Not availablefor Export)

In Base Price

3827 General Purpose Grain Handling System with High Capacity UnloadingSystem and 22.5 Ft (6.9M) 2-Piece Unloading Auger (Export only)Unloading Auger unassembled and crated; requires Dealer installation.

1,021.00

3830 General Purpose Grain Handling System with High Capacity UnloadingSystem and 22.5 Ft. (6.9M) 1-Piece Perforated Unloading Auger(Not available for Export)

439.00





SUGGESTEDLIST PRICE

USD ($)

GRAIN HANDLING AND UNLOADING SYSTEMS ...Continued...

General Purpose Grain Handling System with High Capacity (3.3 Bu/Sec)Unloading System, 26 Ft. Unloading Auger and 300 Bushel Grain TankExtension:Includes: Regular Duty Clean Grain Elevator, Grain Tank Cross Auger, Vertical UnloadingAuger, High Capacity 26 Ft. Unloading Auger with 3.3 Bu/Sec Unloading Rate, and 300Bushel Grain Tank. Recommended for use with 40 Ft. Draper Platforms.

3855 General Purpose Grain Handling System with High Capacity Unloading System and 26 Ft.(7.9M) 1-Piece Unloading Auger(Not available for Export)

2,043.00

3857 General Purpose Grain Handling System with High Capacity Unloading System and 26 Ft.(7.9M) 2-Piece Unloading Auger (Export only)Unloading Auger unassembled and crated; requires Dealer installation.

3,064.00

Extended Wear Grain Handling System with High Capacity (3.3 Bu/Sec)Unloading System and 300 Bushel Grain Tank Extension:Includes: Extended Wear Stainless Steel Clean Grain Elevator, Stainless Steel Grain TankCharge Housing, Stainless Steel Grain Tank Loading Auger Housing, Heavy-Duty Grain TankCross Augers, Vertical Unloading Auger and High Capacity 22.5 Ft. Unloading Auger with3.3 Bu/Sec Unloading Rate and 300 Bushel Grain Tank Extensions. Recommended for use with35 Ft. Flexible Platforms.

3835 Extended Wear Grain Handling System with High Capacity UnloadingSystem and 22.5 Ft. (6.9M) 1-Piece Unloading Auger (Not availablefor Export)

3,589.00

3836 Extended Wear Grain Handling System with High Capacity Unloadingand Powered Folding of the end of the Unloading Auger - Unloadlength 22.5 Ft. (6.9M)

8,602.00

3837 Extended Wear Grain Handling System with High Capacity UnloadingSystem and 22.5 Ft. (6.9M) 1-Piece Unloading Auger (Export only)Unloading Auger unassembled and crated; requires Dealer installation.

4,609.00

3840 Extended Wear Grain Handling System with High Capacity UnloadingSystem and 22.5 Ft. (6.9M) 1-Piece Perforated Unloading Auger(Not available for Export)

3,841.00

Extended Wear Grain Handling System with High Capacity (3.3 Bu/Sec)Unloading System, 26 Ft. Unloading Auger and 300 Bushel Grain TankExtension:Includes: Extended Wear Stainless Steel Clean Grain Elevator, Stainless Steel Grain TankCharge Housing, Stainless Steel Grain Tank Loading Auger Housing, Heavy-Duty Grain TankCross Augers, Vertical Unloading Auger and High Capacity 26 Ft. Unloading Auger with 3.3Bu/Sec Unloading Rate and 300 Bushel Grain Tank Extensions. Recommended for use with 40Ft. Draper Platforms.

3865 Extended Wear Grain Handling System with High Capacity Unloading System and 26 Ft.(7.9M) 1-Piece Unloading Auger(Not available for Export)

4,209.00

3867 Extended Wear Grain Handling System with High Capacity Unloading System and 26 Ft.(7.9M) 2-Piece Unloading Auger (Export only)Unloading Auger unassembled and crated; requires Dealer installation.

5,229.00





SUGGESTEDLIST PRICE

USD ($)



In Base Price

4170 Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated ChaffSpreader and PowerCast Powered Tailboard Residue Management SystemRecommended for Platforms 30 Ft. and greater. Not for use on Rice Combines.

5,981.00


-4,088.00

FINAL DRIVE TYPE4320 Heavy-Duty Final Drive and Heavy-Duty Hydrostatic Drive System In Base Price





4531 30.5L-32 In. 14PR R1Not for use with Codes 3825, 3827, 3830, 3835, 3836, 3837, 3840, 3855, 3857, 3865 and 3867(High Unload Rate systems).

-290.00

4535 30.5L-32 In. 14PR R2 Cane and RiceNot for use with Codes 3825, 3827, 3830, 3835, 3836, 3837, 3840, 3855, 3857, 3865and 3867 (High Unload Rate systems).

688.00

For Header Sizes up to and including 8-Row Corn,15 Ft. Belt Pickup, 35 Ft. Flexible, 30 Ft. Rigid,and 35 Ft. Draper Platforms:For Codes 4582, 4624, 4643, 4646, 4647 and 4650 below, High Flotation Tires include aLadder Landing Extension which will cause ladder interference with the uncut crop whenharvesting with 6 Row Narrow or smaller heads.

4539 800/65R32 172A8 R1 Radial (30.5LR32)Goodyear (Titan Tire) tire is 800/65R32 172A8 R1. Firestone tire is 30.5LR32 R1. If you wantone tire over the other, you need to select a tire preference. If you select no preference, youwill get one or the other. Not for use with 35 Ft. Draper Platforms.

In Base Price





SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS AND TIRES ...Continued...4556 800/65R32 172A8 R1W

Not for use with 35 Ft. Draper Platforms.Same Price

4560 800/70R38 173A8 R1W 1,738.00

4565 900/65R32 178A8 R2 RadialAvailable in Goodyear brand only. Not for use with 35 Ft. Draper Platforms.

4,174.00


8,489.00


5,425.00


9,177.00

4647 520/85R42 157A8 R2 Radial Cane & RiceIncludes required axle spacer and ladder landing extension. Comparable to 20.8R-42.

10,685.00

For Header Sizes up to and including 12-Row Corn,15 Ft. Belt Pickup, 35 Ft. Flexible,30 Ft. Rigid, and 40 Ft. Draper Platforms:For Codes 4562, 4567, 4582, 4624, 4643, 4646, 4647 and 4650 below, High Flotation Tiresinclude a Ladder Landing Extension which will cause ladder interference with the uncut cropwhen harvesting with 6 Row Narrow or smaller heads.

4562 900/60R32 176A8 R1Available in Firestone brand only.

1,550.00

4567 900/60R32 176A8 R1WAvailable in Goodyear brand only.

1,550.00

4650 650/85R38 173A8 R1W RadialWide Spaced Duals for use in 30 In. RowsAvailable in any brand except Titan. Tire width will cause contact with stalk stubble. Includesrequired axle spacer and ladder landing extension. Not available with rear tire Codes 5140,5155 and 5160.

15,793.00

4582 76X50-32 HF3 16PR High FlotationAvailable in Firestone brand only. Requires Code 9988 (No Charge). Includes required axlespacer and ladder landing extension.

14,951.00



-5,156.00


-4,747.00

REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE





SUGGESTEDLIST PRICE

USD ($)

REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE...Continued...Refer to the Tire Compatibility Charts shown in the "Tire Information" section of theAgricultural Sales Manual to verify front-to-rear compatibility, height profile for tire, andwheel spindle selection.



1868cc Displacement.20,330.00



For use with or without 4-Wheel Drive:5132 18.4-26 12PR R1

Not for use with Codes 3825, 3827, 3830, 3835, 3836, 3737, 3840, 3855, 3857, 3865 and 3867.-236.00


In Base Price


668.00


686.00

5170 600/65R28 154A8 R1W 1,948.00

5180 28L-26 In. 12PR R1For adjustable rear axle only.

1,878.00

5184 28L-26 In. 12PR R2 Cane and RiceFor adjustable rear axle only.

2,618.00


For use with 28L-26 In. steering tires only. Includes extra axle stops.-1,746.00

5199 Less Steering Wheels and TiresFor use with all steering tires EXCEPT 28L-26 In.

-1,766.00

TEMPORARY RUST PROTECTION6700 Temporary Surface Rust/Corrosion Protection 253.00





SUGGESTEDLIST PRICE

USD ($)

TEMPORARY RUST PROTECTION ...Continued...Required for protection of combine from road salt corrosion during transport from factory inwinter months and export shipment overseas. Required for Export.


In Base Price



7045 Australian 3-Speed Transmission (Australia only)Only available for 9670 STS Combine.

No Charge


406.00


7205 300 Bushel Grain Tank ExtensionFor use with Standard Unload Rate Codes 3805, 3807, 3810, 3815 and 3817 only.The 300 bushel grain tank extensions do not include windows. Windows are featured in the300 bushel grain tank extension design that is included with the optional high capacityunloading system (3.3 bu/sec) for the 9670 STS corn and small grain combines. The 9670 STSrice combines have the high capacity unloading system with the 300 bushel grain tankextension with windows in base equipment.

1,529.00

7415 Fuel Filter/Water Separator, Severe DutyIn place of Base Equipment Filter/Water Separator.Recommended where fuel quality is a concern.

503.00


7500 Semi-AutoMatic Rear Hitch with Wiring Harness, allows a single operator to connect trailerto combine. (For Export Only, Not Available for Australia)Rated 4500 Kg. Required in Germany when towing more than 3,500 kg load.

873.00

7505 Manual Rear Hitch with Wiring Harness for Towing Header Trailer - (For Export Only, NotAvailable for Australia)Rated 4500 Kg. Some exceptions apply. Check LOCAL REGULATIONS.

646.00


-1,335.00


834.00

7705 LESS Harvest Monitor System (which includes the Mass Flow Sensor and the MoistureSensor). Export onlyIncludes factory installation of combine specific Wiring Harness and steering components forGreenStar AutoTrac System. Also includes: Mounting Bracket for Position Reciever,

-2,657.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...Mounting Bracket for GreenStar GS2 Display. Does not include Mass Flow Sensor or CropMoisture Sensor. (Export only)




No Charge



18,330.00


18,330.00


13,619.00







SUGGESTEDLIST PRICE

USD ($)



2,511.00



1,496.00

Threshing:9200 Sectionalized Concave Cover Plates (Set of 3 covers with 4 pieces to make one complete

cover)for Large Wire and Small Wire Concaves onlyFor additional threshing in hard to thresh crops. Not for use with 9560 STS and 9570 STSCombines.

967.00

9210 Sectionalized Concave Cover Plates (Set of 3) Round Bar Concaves onlyThis cover assembly is used to even out the distribution of crop to the cleaning shoe.

191.00


743.00


2,962.00

9240 Small Wire Concaves (Set of 3)Not recommended for corn. Recommended for small grains and very brittle straw.

3,160.00

9242 Extended Wear Small Wire Concaves (Set of 3)Recommended for high yielding crops or abrasive crop conditions.

4,512.00


3,042.00

9252 Extended Wear Large Wire Concaves (Set of 3)Recommended for high yielding crops or abrasive crop conditions.

4,204.00

Separating:9340 Separator Grate Covers (Set of 20)

Used when harvesting very dry small grain. Reduces chaff load to the cleaning shoe. In baseequipment for Small Grain combines.

1,003.00



707.00





SUGGESTEDLIST PRICE

USD ($)





178.00

Axles and Wheels:Wheel and tire attachments are for conversion of new machines only. Refer to AgriculturalSales Manual Tire Compatibility Charts for Wheel Track Dimensions, Ballastrecommendations and detailed Header Compatibility information.



9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00









SUGGESTEDLIST PRICE

USD ($)







For 9670, 9770, 9870 and S690 Combines not equipped with ProDrive. Not recommended foruse on Rice Combines.2-Wheel Drive Axles have a different wheel bolt pattern than is used on the 2-Speed, 4-WheelDrive System. Therefore, new 4-Wheel Drive Wheel Rims are required when converting to the2-Speed, 4-Wheel Drive. Order 2-Speed, 4-Wheel Drive Rims through Service Parts.

25,533.00

BXE10007 Plumbing, Valves and Hardware for 2100cc or 1886cc 2-Speed, 4-Wheel Drive Motors forAdjustable Rear AxleFor use on Combines NOT Equipped ProDrive Only. PIN 730000 to 736099.Requires Right Hand and Left Hand 1886cc 4-Wheel Drive Motors be ordered through ServiceParts (AH21891/AXE13854). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). For specific motor size recommend usingthe FAL. 2-Wheel Drive Axles have a different wheel bolt pattern than is used on the 2-Speed,4-Wheel Drive System. Therefore, new 4-Wheel Drive Wheel Rims are required whenconverting to the 2-Speed, 4-Wheel Drive. Order 2-Speed, 4-Wheel Drive Rims through ServiceParts. See Parts Catalog for correct Tie Rod End Assemblies. Order separately from PDC.

3,204.00

BXE10103 Plumbing, Valves and Hardware for 2100cc or 1886cc 2-Speed, 4-Wheel Drive Motors forAdjustable Rear AxleFor use on Combines NOT Equipped ProDrive Only. PIN 736100 and up.Requires Right Hand and Left Hand 1886cc 4-Wheel Drive Motors be ordered through ServiceParts (AH21891/AXE13854). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). For specific motor size recommend usingthe FAL. 2-Wheel Drive Axles have a different wheel bolt pattern than is used on the 2-Speed,4-Wheel Drive System. Therefore, new 4-Wheel Drive Wheel Rims are required whenconverting to the 2-Speed, 4-Wheel Drive. Order 2-Speed, 4-Wheel Drive Rims through ServiceParts. See Parts Catalog for correct Tie Rod End Assemblies. Order separately from PDC.

3,204.00




1,848.00


2,511.00






SUGGESTEDLIST PRICE

USD ($)




AH212248 Deep Tooth ChafferFor use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Sieve. Not recommended for use in food corn, popcorn or small grains. Forcombines without TouchSet Remote Combine Adjustment.

See Parts

AH212245 Deep Tooth Chaffer - For TouchSet Remote Combine AdjustmentFor use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Sieve. Not recommended for use in food corn, popcorn or small grains.

See Parts

AH212249 Deep Tooth SieveFor use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Chaffer. Not recommended for use in food corn, popcorn or small grains. Forcombines without TouchSet Remote Combine Adjustment.

See Parts

AH212247 Deep Tooth Sieve - For TouchSet Remote Combine AdjustmentFor use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Chaffer. Not recommended for use in food corn, popcorn or small grains.

See Parts

BH84524 SideHill Performance PackageHelps reduce losses on slopes. Includes full-length tall chaffer dividers, two grain return panpartitions, two grain conveyor auger bed extensions, and grain agitator paddles. Not for usewith Code 3535 or 3515.

707.00


Provides fast yet gentler handling than the standard Serrated Wear Strips. Recommendedwhen harvesting viney crops such as edible beans. Not for use in Rice.

872.00

BH84496 Expanded Stone Trap Door with two-piece feed floor for improved rockprotection for 9660 STS, 9670 STS, 9760 STS, 9770STS, 9860 STSand 9870 STS Combines (PIN 720101 and ABOVE).May reduce capacity in tough green stemmed crops.

1,220.00


1,496.00

BH81489 Feed Accelerator Smooth Wear Strips (Set of 30)For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops suchas popcorn, food corn, etc. Not for use in Rice.

290.00


1,054.00


9,192.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84447 High Torque, Posi-Torq Variable Speed Feederhouse Drive Conversion

for combines equipped with the Heavy Duty Posi-Torq Variable SpeedDrive SystemRecommended for use with chopping corn heads 8 Rows and larger, or high yielding greenstem corn conditions with non-chopping corn heads 12 Rows and larger. For 9660 STS,9670STS, 9760 STS, 9770STS, 9860 STS and 9870 STS combines.

5,929.00




288.00

BH84034 Slow Speed Clean Grain Elevator DriveReduces speed of Clean Grain Elevator from 400 RPM to 250 RPM.Recommended for edible beans or soybeans only. Not recommended for cropsin excess of 50 bushel/acre yield. Refer to the Agricultural Sales Manual foradditional ordering information and GreenStar limitations.

SPECIAL NOTE:The following Edible Bean Grain Handling Kits are available from AmadasIndustries. All Amadas bundles are supported by Amadas Industries which issolely responsible for the performance and quality of the product. Amadas isalso responsible for all technical support, warranty and service publications ofthese products. For exact pricing and availability call Amadas Industries(757-539-0231).

BUCKET CONVEYOR KIT (replaces Paddle Chain Conveyor)Recommended for edible beans only. Requires BH84034 Slow-Speed CleanGrain Elevator Drive.

SLOW-SPEED GRAIN TANK LEVELING AUGERRecommended for edible beans only. See Agricultural Sales Manual for morespecific requirements.Also requires the In-Cab Electronic Control Panel and Hydraulic Drive System(order separately from Amadas Industries).

BELT UNLOADING CONVEYORRecommended for edible beans. See Agricultural Sales Manual for morespecific information.Also requires the In-Cab Electronic Control Panel and Hydraulic Drive System(order separately from Amadas Industries).

IN-CAB ELECTRONIC CONTROL PANEL AND HYDRAULIC DRIVESYSTEMRequired to operate the Belt Unloading Conveyor system and/or theSlow-Speed Grain Tank Leveling Auger system.

447.00


See Parts


High Flotation Drive Tires:BH90058 76x50-32 HF3 16PR High Flotation Drive Tires

For 9660 CTS, 9660 STS, 9670 STS, 9760 STS, 9770 STS, 9860 STS and 9870 STS Combines.25,172.00





SUGGESTEDLIST PRICE

USD ($)





1,359.00



825.00


Residue Disposal:BH90153 12 Vane Tailboard to PowerCast

For 9670 STS, 9770 STS and 9870 STS.6,579.00

BH90151 Spreader to Wingblade Chopper with 12 Vane Tailboard and DrivesFor 9670 STS Only.

11,661.00

BH84523 Straw Spreader Parts, Extra Wide, for use on Twin Disk, Wide Spreadwith Integrated Chaff SpreaderFor 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS and 9870 STS.For spread width up to 40 Ft.

1,507.00

Separating:BH81947 Separator Grate Covers (Set of 4)

In base equipment for Small Grain Combines.5 Sets are required.Recommended for harvesting small grains to reduce cleaning shoe loads.

200.00

Spacers:BH80839 12 In. (300 mm) Axle Spacer 1,891.00

BH80836 16 In. (400 mm) Axle Spacer 1,949.00


2,202.00


672.00

BH80985 4 In. (105 mm) Axle SpacerFor extra mud clearance.

1,474.00






SUGGESTEDLIST PRICE

USD ($)




5,617.00



5,617.00



743.00

BH84225 Concave Inserts - Set of 20For 9600 and 9660 WTS Combines. For Rasp Bar or Spike Tooth Concave (PIN 635975 andup). PIN 630101 - 635974 requires concave modification.

471.00


2,962.00

BH84286 Extended Wear Large Wire Concaves (Set of 3)Recommended for high yielding crops or abrasive crop conditions.

4,204.00

BH84285 Extended Wear Small Wire Concaves (Set of 3)Recommended for high yielding crops or abrasive crop conditions.

4,512.00


3,042.00

BH84534 Sectionalized Concave Cover Plates (Set of 3 covers with 4 pieces to make one completecover)for Large Wire and Small Wire Concaves onlyFor additional threshing in hard to thresh crops. Not for use with 9560 STS and 9570 STSCombines.

967.00

BH84535 Sectionalized Concave Cover Plates (Set of 3) Round Bar Concaves onlyThis cover assembly is used to even out the distribution of crop to the cleaning shoe.

191.00

BH84229 Small Wire Concaves (Set of 3)Not recommended for corn. Recommended for small grains and very brittle straw.

3,160.00


854.00




9670 STS COMBINE




































































































SUGGESTEDLIST PRICE

USD ($)



161LH 9670 STS Small Grain Combine (Model Year 2011)For use with Non-StalkMaster Corn Heads up to 12 Rows, StalkMaster Corn Heads up to 8Rows, Platforms up to 35 Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms or size (i.e. 12 Row Non-StalkMaster

310,809.00





SUGGESTEDLIST PRICE

USD ($)



Small Grain Packages:0509 Performance

>> Small Grain Customer> Requires high unload rate capability


Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2810) Small Wire Concave(3510) General Purpose Chaffer and Sieve(3825) General Purpose Grain Handling System with High Capacity



-705.00

0513 Performance Plus>> Small Grain Customer

> Requires high unload rate capability> Requires the advantages of extended wear components


Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2830) Extended Wear Small Wire Concave and Extended Wear

Separator Package(3510) General Purpose Chaffer and Sieve(3825) General Purpose Grain Handling System with High Capacity



-1,411.00

0538 Performance Plus with SLS>> Small Grain Customer

> Requires high unload rate capability> Requires the advantages of extended wear components> Operating on slopes


Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2830) Extended Wear Small Wire Concave and Extended WearSeparator Package(3515) General Purpose Chaffer and Sieve with SLS(3825) General Purpose Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00





SUGGESTEDLIST PRICE

USD ($)


>> Small Grain Customer> Requires high unload rate capability> Requires the advantages of extended wear components> Operating large header equipment


Features:(1585) Contour-Master Feederhouse with Reverser and High-TorqueFixed Speed Drive System(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2830) Extended Wear Small Wire Concave and Extended WearSeparator Package(3510) General Purpose Chaffer and Sieve(3855) General Purpose Grain Handling System with High CapacityUnloading System and 26 Ft. One-Piece Unloading Auger(4170) Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated Chaff Spreaderand PowerCast Powered Tailboard Residue Management System

-1,411.00

0515 Smart Performance Plus>> Small Grain Customer

> Requires the advantages of extended wear components> Requires HarvestSmart Feedrate Control System


Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(1985) HarvestSmart Feedrate Control and Premium Header Control Package(2830) Extended Wear Small Wire Concave and Extended Wear

Separator Package(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High Capacity

Unloading System and 22.5 Ft. One-Piece Unloading Auger(4170) Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated Chaff

Spreader and PowerCast Powered Tailboard Residue Management System

-2,820.00


In Base Price



In Base Price


1,113.00


3,564.00


3,032.00





SUGGESTEDLIST PRICE

USD ($)



-2,006.00


-687.00

1530 Level Land Feederhouse with Reverser and Fixed Speed Drive SystemRecommended for use with Rigid Platforms 30 Ft. and less, Draper Platforms 25 Ft. and less,and the 615 Belt Pickup.

-5,849.00

1560 Contour-Master Feederhouse with Reverser and Heavy-Duty VariableSpeed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 8 Rows and less, StalkMaster CornHeads 6 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 35 Ft. and less, and the 615 Belt Pickup. Contour-Master is recommendedto maximize performance of 600D Draper Platforms when operating in rolling terrain.

3,844.00


5,161.00

1585 Contour-Master Feederhouse with Reverser and High-TorqueFixed Speed Drive SystemRecommended for use with StalkMaster Corn Heads 12 Rows and less except for 12 row 30 In.spacing, Non-StalkMaster Corn Heads 12 Rows and less, Flex Platforms 35 Ft. and less, RigidPlatforms 30 Ft. and less, Draper Platforms 40 Ft. and less, and the 615 Belt Pickup.Contour-Master is recommended to maximize performance of 600D Draper Platforms whenoperating in rolling terrain.

In Base Price



In Base Price


912.00



In Base Price

1985 HarvestSmart Feedrate Control and Premium Header Control PackageIncludes: 3-Position Header Height Resume, Reel Resume, Active Header Float System andHHS (Header Height Sensing) System. For combines operating with platforms equipped withHHS (Header Height Sensing). Also includes: Feedrate Control System Sensors, WireHarness and Electronic Controls. HarvestSmart Feedrate Control is not recommended for use

8,356.00





SUGGESTEDLIST PRICE

USD ($)

COMBINE/HEADER CONTROL SYSTEMS ...Continued...in harvesting operations that are consistently limited by header capability, and is notrecommended for use in very muddy conditions or where sidehill losses are the limit ofcombine capacity.




In Base Price

2811 Extended Wear Small Grain Combination Concave (Australia only)Includes: Extended Wear (boronized) Combination Small Wire Concaves (31-wire front and25-wire mid and rear concaves).

1,229.00


-107.00



3,093.00


3,475.00

2831 Extended Wear Small Wire Combination Concave and Extended WearSeparator Package (Australia only)Includes: Extended Wear (boronized) Combination Small Wire Concaves (31-wire front and25-wire mid and rear concaves), Extended Wear Threshing Elements, Separator Tines andRotor Top Covers.

3,475.00



7,044.00






SUGGESTEDLIST PRICE

USD ($)


General Purpose Grain Handling System with Standard (2.2 Bu/Sec)Unloading Rate and 250 Bushel Grain Tank:Includes: Regular Duty Clean Grain Elevator, Grain Tank Cross Augers and VerticalUnloading Auger, and 21.5 Ft. Unloading Auger with 2.2 Bu/Sec Unloading Rate. Notrecommended for use with 35 Ft. Flexible Platforms.

3805 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 1-Piece Unloading Auger (Not available for Export)

-4,053.00


-3,033.00

3810 General Purpose Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 1-Piece Perforated Unloading Auger (Not available forExport)

-3,325.00

Extended Wear Grain Handling System with Standard (2.2 Bu/Sec)Unloading Rate and 250 Bushel Grain Tank:Includes: Extended Wear Clean Grain Elevator, Grain Tank Cross Auger, Vertical UnloadingAuger, and 21.5 Ft. Unloading Auger with 2.2 Bu/Sec Unloading Rate. Not recommended foruse with 35 Ft. Flexible Platforms.

3815 Extended Wear Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 1-Piece Unloading Auger (Not available for Export)

-1,520.00

3817 Extended Wear Grain Handling System with Standard Unloading Rate and21.5 Ft. (6.6M) 2-Piece Unloading Auger (Export only)

-499.00



In Base Price


1,021.00


439.00





SUGGESTEDLIST PRICE

USD ($)




2,043.00


3,064.00



3,589.00


8,602.00


4,609.00


3,841.00



4,209.00


5,229.00





SUGGESTEDLIST PRICE

USD ($)



In Base Price


5,981.00


-4,088.00






4531 30.5L-32 In. 14PR R1Not for use with Codes 3825, 3827, 3830, 3835, 3836, 3837, 3840, 3855, 3857, 3865 and 3867(High Unload Rate systems).

-290.00

4535 30.5L-32 In. 14PR R2 Cane and RiceNot for use with Codes 3825, 3827, 3830, 3835, 3836, 3837, 3840, 3855, 3857, 3865and 3867 (High Unload Rate systems).

688.00



In Base Price





SUGGESTEDLIST PRICE

USD ($)



4560 800/70R38 173A8 R1W 1,738.00

4565 900/65R32 178A8 R2 RadialAvailable in Goodyear brand only. Not for use with 35 Ft. Draper Platforms.

4,174.00


8,489.00


5,425.00


9,177.00


10,685.00



1,550.00


1,550.00


15,793.00


14,951.00



-5,156.00


-4,747.00






SUGGESTEDLIST PRICE

USD ($)

REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE...Continued...Refer to the Tire Compatibility Charts shown in the "Tire Information" section of theAgricultural Sales Manual to verify front-to-rear compatibility, height profile for tire, andwheel spindle selection.


4950 Fixed Rear Axle with Heavy-Duty Spindles -514.00








In Base Price


668.00


686.00

5170 600/65R28 154A8 R1W 1,948.00


1,878.00


2,618.00




-1,766.00





SUGGESTEDLIST PRICE

USD ($)



253.00


In Base Price



7045 Australian 3-Speed Transmission (Australia only)Only available for 9670 STS Combine.

No Charge

7140 High Capacity Feeding PackageIncludes: High Speed Feed Accelerator Drive (510/1000 RPM), Multi-Serrated FeedAccelerator Wear Strips. Recommended for use in tough, heavy windrowed crops only. Notrecommended for use in corn, edible beans or seed crops.

793.00


406.00


7205 300 Bushel Grain Tank ExtensionFor use with Standard Unload Rate Codes 3805, 3807, 3810, 3815 and 3817 only.The 300 bushel grain tank extensions do not include windows. Windows are featured in the300 bushel grain tank extension design that is included with the optional high capacityunloading system (3.3 bu/sec) for the 9670 STS corn and small grain combines. The 9670 STSrice combines have the high capacity unloading system with the 300 bushel grain tankextension with windows in base equipment.

1,529.00


503.00



873.00


646.00


-1,335.00

7701 SideHill Ready Configuration for combines ordered with Single Drive TiresIncludes BH81747, 1390 mm Ladder Landing Extension and related parts. Reference DTACSolution 61907 for information needed for proper wheel and tire equipment in a sidehillapplication.

834.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...Not available with Code 3535 or 3515 SLS (Self Leveling Shoe).


-2,657.00




No Charge



18,330.00


18,330.00


13,619.00





SUGGESTEDLIST PRICE

USD ($)





2,511.00



1,496.00



967.00


191.00


743.00


2,962.00


3,160.00


4,512.00


3,042.00


4,204.00



707.00





SUGGESTEDLIST PRICE

USD ($)





178.00




9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00









SUGGESTEDLIST PRICE

USD ($)








25,533.00


3,204.00


3,204.00




1,848.00


2,511.00






SUGGESTEDLIST PRICE

USD ($)





See Parts


See Parts


See Parts


See Parts


707.00



872.00


1,220.00


1,496.00


290.00


1,054.00


9,192.00





SUGGESTEDLIST PRICE

USD ($)



5,929.00




288.00







447.00


See Parts








SUGGESTEDLIST PRICE

USD ($)





1,359.00



825.00





11,661.00


1,507.00



200.00




2,202.00


672.00


1,474.00






SUGGESTEDLIST PRICE

USD ($)




5,617.00



5,617.00



743.00


471.00


2,962.00


4,204.00


4,512.00


3,042.00


967.00


191.00


3,160.00


854.00




9670 STS COMBINE

























































9670 STS Rice Combine (Model Year 2011)Equipment for Base Machine











































SUGGESTEDLIST PRICE

USD ($)



161MH 9670 STS Rice Combine (Model Year 2011)For use with Non-StalkMaster Corn Heads up to 12 Rows, StalkMaster Corn Heads up to 8Rows, Platforms up to 35 Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms or size (i.e. 12 Row Non-StalkMaster

331,443.00


9670 STS Rice Combine (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)



Rice Packages:0516 Performance Plus with Level Land and Spreader

>> Rice Customer> Requires a Level Land Feederhouse> Does not chop residue


Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2828) Extended Wear Large Wire Concave and Extended Wear




-1,411.00

0517 Performance Plus with Countour-Master and Spreader>> Rice Customer

> Requires a Contour-Master Feederhouse> Does not chop residue


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2828) Extended Wear Large Wire Concave and Extended Wear




-1,411.00

0518 Performance Plus with Level Land and Chopper>> Rice Customer

> Requires a Level Land Feederhouse> Requires the ability to chop residue


Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2828) Extended Wear Large Wire Concave and Extended Wear




-1,411.00





SUGGESTEDLIST PRICE

USD ($)

VALUE PACKAGE CONFIGURATIONS ...Continued...0519 Performance Plus with Contour-Master and Chopper

>> Rice Customer> Requires a Contour-Master Feederhouse> Requires the ability to chop residue


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(1975) Premium Header Control Package(2828) Extended Wear Large Wire Concave and Extended Wear




-1,411.00


In Base Price



In Base Price


1,113.00


3,564.00


3,032.00



3,843.00


5,161.00


In Base Price

1560 Contour-Master Feederhouse with Reverser and Heavy-Duty Variable 9,693.00





SUGGESTEDLIST PRICE

USD ($)

FEEDERHOUSE TYPE ...Continued...Speed Drive SystemRecommended for use with Non-StalkMaster Corn Heads 8 Rows and less, StalkMaster CornHeads 6 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 35 Ft. and less, and the 615 Belt Pickup. Contour-Master is recommendedto maximize performance of 600D Draper Platforms when operating in rolling terrain.


11,010.00



In Base Price


912.00



In Base Price


8,356.00




-1,806.00





SUGGESTEDLIST PRICE

USD ($)

CONCAVES AND EXTENDED WEAR SEPARATOR PACKAGES...Continued...


In Base Price



7,044.00




In Base Price


5,013.00


992.00


439.00



620.00





SUGGESTEDLIST PRICE

USD ($)

GRAIN HANDLING AND UNLOADING SYSTEMS ...Continued...3867 Extended Wear Grain Handling System with High Capacity Unloading System and 26 Ft.

(7.9M) 2-Piece Unloading Auger (Export only)Unloading Auger unassembled and crated; requires Dealer installation.

1,612.00



In Base Price


-4,088.00

FINAL DRIVE TYPE4320 Heavy-Duty Final Drive and Heavy-Duty Hydrostatic Drive System

Recommended for use when equipped with 35.5x32 In., 20.8x42 In., 900/65R32, 76x50-32 In.,or 800/70R38 In. Drive Tires.

Same Price

4330 High Clearance, Heavy-Duty Final Drive and Heavy-DutyHydrostatic Drive SystemNot recommended for use when equipped with 35.5x32 In., 20.8x42 In., 900/65R32, 76x50-32In., or 800/70R38 In. Drive Tires due to platform cutterbar angle limitations.

In Base Price






In Base Price





SUGGESTEDLIST PRICE

USD ($)



4560 800/70R38 173A8 R1WNot recommended for use when equipped with Code 4330 (High Clearance Final Drive).

1,738.00

4565 900/65R32 178A8 R2 RadialAvailable in Goodyear brand only. Not recommended for use when equipped with Code 4330(High Clearance Final Drive). Not for use with 35 Ft. Draper Platforms.

4,174.00

4624 480/80R42 154A8 R1 RadialWide Spaced Duals for use in 30 In. RowsIncludes required axle spacer and ladder landing extension. Not recommended for use whenequipped with Code 4330 (High Clearance Final Drive). Comparable to 18.4R-42.

8,489.00


5,425.00


9,177.00


10,685.00


4562 900/60R32 176A8 R1Available in Firestone brand only. Not recommended for use when equipped with Code 4330(High Clearance Final Drive).

1,550.00

4567 900/60R32 176A8 R1WAvailable in Goodyear brand only. Not recommended for use when equipped with Code 4330(High Clearance Final Drive).

1,550.00

4650 650/85R38 173A8 R1W RadialWide Spaced Duals for use in 30 In. RowsAvailable in any brand except Titan. Tire width will cause contact with stalk stubble. Includesrequired axle spacer and ladder landing extension. Not available with rear tire Codes 5140,5155 and 5160. Not recommended for use when equipped with Code 4330 (High ClearanceFinal Drive).

15,793.00

4582 76X50-32 HF3 16PR High FlotationAvailable in Firestone brand only. Requires Code 9988 (No Charge). Includes required axlespacer and ladder landing extension. Not recommended for use when equipped with Code4330 (High Clearance Final Drive).

14,951.00



-5,156.00





SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS AND TIRES ...Continued...4699 Less Drive Wheels and Tires


-4,747.00


Rear Axle Without 4-Wheel Drive:4920 Adjustable Rear Axle with Heavy-Duty Spindles -20,330.00


2100cc Displacement.In Base Price






In Base Price


668.00


686.00

5170 600/65R28 154A8 R1W 1,948.00


1,878.00


2,618.00







SUGGESTEDLIST PRICE

USD ($)

STEERING WHEELS AND TIRES ...Continued...5199 Less Steering Wheels and Tires




253.00


In Base Price




406.00


503.00



873.00


646.00


-1,335.00


834.00


-2,657.00





SUGGESTEDLIST PRICE

USD ($)




No Charge



18,330.00


18,330.00


13,619.00




2,511.00





SUGGESTEDLIST PRICE

USD ($)




1,496.00



967.00


191.00


743.00


2,962.00


3,160.00


4,512.00


3,042.00

9252 Extended Wear Large Wire Concaves (Set of 3)Recommended for high yielding crops or abrasive crop conditions. In base equipment for Ricecombines.

4,204.00

9280 Enhanced Rice Performance BundleFor 9670STS Rice, 9770STS Rice, 9660STS Rice, 9760STS Rice and 9860STS Rice Combines.Includes Tine Feed Accelerator (65 Tines), "Comb" feed section floor, Eighteen Threshing STSRotor Tines, Two Rotor Discharge Paddles and Discharge Concave.Note: 60 Series Combines also require Discharge Housing ordered through Service Parts.

6,093.00



1,003.00



707.00





SUGGESTEDLIST PRICE

USD ($)


Grain Handling:9530 Additional "Full" Grain Tank Sensor





9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00











SUGGESTEDLIST PRICE

USD ($)






25,533.00

BXE10007 Plumbing, Valves and Hardware for 2100cc or 1886cc 2-Speed, 4-Wheel Drive Motors forAdjustable Rear AxleFor use on Combines NOT Equipped ProDrive Only. PIN 730000 to 736099.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). For specific motor size recommend usingthe FAL. 2-Wheel Drive Axles have a different wheel bolt pattern than is used on the 2-Speed,4-Wheel Drive System. Therefore, new 4-Wheel Drive Wheel Rims are required whenconverting to the 2-Speed, 4-Wheel Drive. Order 2-Speed, 4-Wheel Drive Rims through ServiceParts. See Parts Catalog for correct Tie Rod End Assemblies. Order separately from PDC.

3,204.00

BXE10103 Plumbing, Valves and Hardware for 2100cc or 1886cc 2-Speed, 4-Wheel Drive Motors forAdjustable Rear AxleFor use on Combines NOT Equipped ProDrive Only. PIN 736100 and up.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). For specific motor size recommend usingthe FAL. 2-Wheel Drive Axles have a different wheel bolt pattern than is used on the 2-Speed,4-Wheel Drive System. Therefore, new 4-Wheel Drive Wheel Rims are required whenconverting to the 2-Speed, 4-Wheel Drive. Order 2-Speed, 4-Wheel Drive Rims through ServiceParts. See Parts Catalog for correct Tie Rod End Assemblies. Order separately from PDC.

3,204.00




1,848.00


2,511.00







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AH213857 3 mm Fixed Round Hole Sieve See Parts


See Parts


See Parts


See Parts


See Parts


707.00



872.00


1,220.00


1,496.00


290.00


1,054.00


9,192.00





SUGGESTEDLIST PRICE

USD ($)



5,929.00









447.00


See Parts










SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH80964 55 In. (1390 mm) Ladder Extension




825.00





11,661.00


1,507.00



200.00




2,202.00


672.00


1,474.00




5,617.00





SUGGESTEDLIST PRICE

USD ($)




5,617.00



743.00


471.00

BH84627 Enhanced Rice Performance BundleFor 9670STS Rice, 9770STS Rice, 9660STS Race, 9760STS Rice and 9860STS Rice Combines.Includes Tine Feed Accelerator (65 Tines), "Comb" feed section floor, Eighteen Threshing STSRotor Tines, Two Rotor Discharge Paddles and Discharge Concave.Note: 60 Series Combines also require Discharge Housing ordered through Service Parts.

6,093.00


2,962.00

BH84286 Extended Wear Large Wire Concaves (Set of 3)Recommended for high yielding crops or abrasive crop conditions. In base equipment for Ricecombines.

4,204.00


4,512.00


3,042.00


967.00


191.00


3,160.00


854.00




T670 COMBINE

OPERATOR'S CAB:Pressurized Cab with HVAC ClimaTrac

Automatic Temperature Control2 Large Convex, Heated and Power

Adjustable Mirrors and Kerb MirrorWindshield Wiper (1-Blade) with WasherTilt-Telescoping Steering ColumnComfortCommand Seat with Air Suspension

and Seat BeltTraining Seat with Field Office and

Seat BeltSun Visor, Coat Hook, and Operator's

Manual Storage3-Position Pivoting Operator's LadderLarge Cup HolderAuxiliary Power Outlet StripCool Box Beverage StorageRadio Pre-wire and Radio Speaker

Installed


with Electro-HydraulicControlled Header and Separator Controls

Dial-A-Speed (Automatic Reel Speed Control)Header Reverser with Reel Reverse Feature

for Flex and Rigid PlatformsCommandCenter Armrest Display Unit for:

HarvestSmartTouchSet (Automatic Combine Adjustment)

Harvester MonitorWarning Alarm and Diagnostic Information

CenterRemote Grain Tank Cover ControlHydrostatic Ground Speed Control

Handle with Integral Buttons for:Reel Height Feederhouse Speed and

Fore/Aft Remote Reel Control2-Speed Header Lift and Contour-Master

Feederhouse Lateral Tilt Control3-Position Header Height Resume and

Reel Resume System5-Position Unloading Auger Swing and


Disengage SwitchDraper Variable Belt Speed In-Cab ControlMulti-Function CommandTouch Corner Post

Display with:3-Line Digital TachometerVisionTrak Grain Loss and

Tailings MonitorActive Header Control Display

Premium Header Control PackageIncludes:

3-Position Header Height Resume, Reel Resume,Active Header Float System and Header HeightSensing System

LIGHTING:High Intensity Infrared Halogen

Transport and Field Lamps (6) 65 WattFieldVision Xenon HID Lighting (2)Grain Tank and Unloading Auger Lamps (2)Unloading Auger Light, Ring and Harness

shipped from JDHW with auger bundleWarning and Tail Lamps with Integral

Turn Signals (4)Rotating beacon lights with Grain Cart Call (2)SideFinder Lights (2)Cleaning Shoe Light (2)Exit LightingRear Residue Discharge Lights (2)Stubble Lights (2)Service Lights (5)

Deceleration Warning Light

FEEDERHOUSE:Level Land Feederhouse with Heavy-Duty

Fixed Speed DrivePush Button Electro-Hydraulic Reverser ShiftEngagementSingle Point Electric Hydraulic Hookup

and Latching System17 Degree Fore/Aft Adjustable Front

Tilt Frame

THRESHING AND SEPARATING:Stone Trap with Remote Dump26 In. x 65.5 In.(660 mm x 1661 mm)

Cylinder with 10 Non-Chrome RaspBars (Less Cylinder Filler Plates)

13 Bar Universal Long Wire Concave29.5 In. x 65.7 In. (750 mm x 1670 mm)116 Degree wrap with Handle AdjustedDeawning Plates

Smoothing Surface Concave Stripper Roll(140 mm dia.)

8 Wing Overshot Beater (420 mm dia.)Time Separator with 8 Tine Separator

Bars (660 mm dia.)Tine Separator Grate with Two

Position Handle Adjustment8 Wing Rear Beater (400 mm dia.)Rear Beater Grate with Two Position

Handle AdjustmentBeater Grate Curtain

240-980 RPM dual Range Cylinder Drive6 Straw Walkers (3,250 mm length)

with 7 Multi Steps design withBolted Universal Grids(Steps 4th, 5th and 7th)

CLEANING:Quadra-Flo Plus Cleaning SystemDual-Flo Cleaning FansGeneral Purpose Adjustable Chaffer,

Sieve and Precleaner with TouchSetRemote Element Adjustment

GRAIN HANDLING:300 Bushel (10,572L) Grain Tank2.2 Bushels Per Second (average),



(Outer Auger Assembly shipped from JDHWand Dealer installed)

Powered Remote Folding Grain TankLoading Auger and Covers

RESIDUE MANAGEMENT:Premium Straw Chopper and Chaff Spreader

with Windrow Deflector Door andRemote Adjustable Chopper DischargeVane

Wide Spread Wind Paddle Bundle for Premium StrawChopper


PowerTech Plus Turbo-Charged, Air-to-AirAftercooler, Diesel Engine 360 Hp(268 kW) at 2200 RPM, 385 Hp (287 kW)Max Power Bulge at 2100 RPM, and 393 Hp(293 kW) Max Unloading Power, ElectronicallyControlled Fuel Injection and Fuel Shutoff

120 AMP Alternator210 Gal. (800L) Fuel TankRotary Screen Air Intake with Vacuum Pickup


T670 Small Grain Combine (Model Year 2011)Equipment for Base Machine


Fuel CoolerAutomatically Tensioned Poly-V Accessory

Drive BeltsEngine Coolant Heater (110V)

WHEELS AND DRIVES:800/65R32 172A8 Goodyear DT822 Drive Tire with480/80R26 160A8 Goodyear Steering Tire Heavy DutyFinal Drive6.5 In. (165 mm) Axle Spacer,

includes 940 mm Ladder ExtensionStandard Duty 105cc Variable Speed

Hydrostatic Ground Drive Systemwith 3-Speed 30 kph (19 mph)Transmission

Adjustable Rear Axle with Heavy-DutySpindles


Proportional Header Control andHigh Capacity (15 GPM) System, withSingle Piece Integral Valve Assembly

Header Suspension System with Active Floatand .7 Liter Accumulator

2.5 In. (63 mm) Diameter FeederhouseLift Cylinders with High CapacityHydraulic Pump

SERVICEABILITY:Full Composite Flip-Open Side ShieldsCentral Lube ChartsEasy Access Lube BanksHydraulic Diagnostic ReceptaclesEnclosed Steel Tool Box with Tray

MISCELLANEOUS:Independent Hydraulic BrakesManual Park BrakeOne 10-Lb. Type ABC Fire Extinguisher

(Front Mounted)(Shipped from JDHW/Dealer Installed)

One 2.5 Gal. Water Fire Extinguisher. Shippedempty, requires filling at pre-delivery.Back Up AlarmFluid Film Corrosion ProtectionLoading Hooks for Crane LiftingCylinder Slug Wrench



SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS Port of Entry

2483Z T670 Small Grain Combine (Model Year 2011)For use with Platforms up to 30 Ft., Draper Platforms up to 36 Ft. and the 615 Belt Pickup.Ordering this base code will generate an automatic order for BH90118 which is included inthe base price and will be shipped to you from John Deere Harvester Works. This bundleincludes the outer unloading auger section, boot, dribble door, harness, unloading auger light,fire extinguisher with mounting bracket, 165 mm axle spacers and miscellaneous shield latchesand handles.

303,035.00

COMBINE CONTROLS5950 Less ProDrive Transmission and HarvestSmart Combine Feedrate Control In Base Price

5960 ProDrive Transmission and HarvestSmart Feed Rate Control 11,038.00

CONCAVES5205 Universal Full (large) Wire Concave with Deawning Plates In Base Price

5201 Small Wire Concave with Deawning Plates 859.00

FEEDERHOUSE TYPE4831 Level Land Feederhouse with Reverser and Fixed Speed Drive with Heavy Duty

Gathering ChainIn Base Price


T670 Small Grain Combine (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)

FEEDERHOUSE TYPE ...Continued...4833 Contour-Master Feederhouse with Reverser and Fixed Speed Drive with Heavy Duty

Gathering Chain6,270.00

AG MANAGEMENT SOLUTIONS2440 GreenStar Harvest Monitor (Yield-Monitoring) System LESS

GreenStar Display and LESS Display Mounting BracketGreenStar AutoTrac Ready (without Key)AutoTrac requires a StarFire Position Receiver with Terrain Compensation Module (TCM),GreenStar Display with AutoTrac Key, In-Cab Display Harness, and StarFire DifferentialSignal (SF2 or RTK signal preferred). These items must be ordered separately from AMS.StarFire Receiver Bracket is included with Code 2440.

4,882.00

2450 GreenStar Harvest Monitor (Yield-Monitoring) System LESSGreenStar Display and LESS Display Mounting BracketIncludes: Mass Flow Sensor for yield measurement, and Crop Moisture Sensor. Monitoringfunction is controlled through the CommandCenter Display.

In Base Price

WHEELS AND TIRESRefer to Agricultural Sales Manual for Wheel Track Dimensions, Ballast recommendationsand detailed Header Compatibility information.

For Header Size up to and including 15 Ft. Belt Pickup, 30 Ft. Flexible, 30 Ft.Rigid, and 36 Ft. Draper Platforms:

2525 800/65R32 172A8 Goodyear DT822 R1W Drive Tire and480/80R26 160A8 R1W Steering TireAvailable in Goodyear brand only.

In Base Price

2528 800/65R32 172A8 Michelin DT822 R1W Drive Tire and480/80R26 160A8 R1W Steering TireAvailable in Michelin brand only.

447.00

2531 900/55R32 173A8 Goodyear DT830 with 600/65R28 154A8 GoodyearAvailable in Goodyear brand only.

5,831.00

2502 Less Drive Tire and480/80R26 160A8 R1W Steering TireAvailable in Goodyear brand only. For use with BH92105 Dealer Installed 20.8X42 DualDrive Tires.Note: BH92105, BH84240, and BH84222 must be ordered separately from JDHW andincludes axle and ladder extensions, extended marker lights and inner and outer dual drivetires. Receiving dealer will need to provide drive tires to unload combines ordered with thiscode.

-6,006.00

2503 Less Drive Tire and600/65R28 154A8 R1W Steering TireAvailable in Goodyear brand only. For use with BH92105 Dealer Installed 20.8X42 DualDrive Tires.Note: BH92105, BH84240, and BH84222 must be ordered separately from JDHW andincludes axle and ladder extensions, extended marker lights and inner and outer dual drivetires. Receiving dealer will need to provide drive tires to unload combines ordered with thiscode.

-3,720.00






SUGGESTEDLIST PRICE

USD ($)



Rear Axle With 2-Speed, 4-Wheel Drive:2605 Adjustable Rear Axle and 2-Speed, 4-Wheel Drive 20,330.00

SPECIAL ATTACHMENTS FACTORY INSTALLED

Miscellaneous:6052 Concave Booster Bar (stored underneath the feederhouse) 592.00


Miscellaneous:9004 Windrow Deflector Rake to Reduce Windrow Width 157.00

Separating:9003 Slow Speed Cleaning Fan Kit for use in grass seed

For WTS and T670 Combines only.824.00

Operator's Manual:0632 French Operator's Manual No Charge



For 9450, 9550, SideHill 9550, 9650, 9650 CTS, 9560, SideHill 9560, 9660, 9660 CTS, 9660WTS and T670 Combines. Requires 4-Wheel Drive rims if combine is equipped with regularduty spindles. See Service Parts.

25,533.00

Grain Handling:BH80520 Perforated Elevator Boots, Doors, and Clean Grain Cross Auger Trough

For 9650, 9660, 9660 WTS and T670 Combines.370.00

Miscellaneous:BZ13513 Windrow Deflector Rake to Reduce Windrow Width 157.00

Residue Disposal:BZ100192 Wide Spread Wing Blade Chopper Blades

Recommended for even straw distribution up to 30 Ft.722.00





SUGGESTEDLIST PRICE

USD ($)


Separating:BZ13666 Slow Speed Cleaning Fan Kit for use in grass seed

For WTS and T670 Combines only.824.00




9770 STS COMBINE


Automatic Temperature Control2 Large Convex, Rearview MirrorsWindshield Wiper (1-Blade) with WasherTilt-Telescoping Steering ColumnComfortCommand Seat with Air SuspensionTraining SeatDriver and Training Seat BeltsSun Visor, Coat Hook and Operator's

Manual Storage3-Position Pivoting Operator's LadderLarge Cup HolderAuxiliary Power Outlet StripBusiness Band Radio Pre-WireRadio Ready with two Pre-wired











Control or Feederhouse BackshaftSpeed and Deck Plate Adjustment

2-Speed Header Raise and LowerContour-Master Tilt Control

3-Position Header Height andReel Resume

5-Position Unloading Auger Swing andUnloading Auger Engage Controls

Quick-Stop Header/Unloading AugerDisengage Switch

Draper Variable Belt Speed In-Cab ControlTouchSet (Automatic Combine Adjustment) includes:



Multi-Function CommandTouch CornerPost Display with:3-Line Digital TachometerVisionTrack Grain Loss and



3-Position Header Height Resume,Reel Resume, Active Header FloatSystem and Header Height SensingSystem


Transport and Field Lamps (6)Grain Tank and Unloading Auger Lamps (2)Warning and Tail Lamps with

Cleaning Shoe Lights (2)Rotating beacon lights with Grain Cart Call (3)SideFinder Lights (2)Cleaning Shoe Lights (2)Exit LightingRear Residue Discharge Lights (2)Stubble Lights (2)Deceleration Warning Light


High-Torque Variable Speed Drive System (Corn)Contour-Master Feederhouse with Reverser and



Heavy-Duty Front DrumPush Button Electro-Hydraulic

Shift Feederhouse Reverser EngagementSingle-Point Header Latching and

Electric Hydraulic Hookup17 Degree Fore/Aft Adjustable Front

Tilt Frame2-Speed Feeder Chain

(Corn and Small Grain)Front Drum Side Shields

THRESHING AND SEPARATING:Bullet Rotor Threshing Technology15 Threshing Elements (Corn and Small Grain)24 Threshing Elements (Rice)Single Tine Separator (STS)













12 Blade 20 In. Diameter (500 mm) DualDischarge Cleaning Fan

Deep Tooth Adjustable Chaffer andSieve (Corn)

General Purpose Adjustable Chaffer andSieve (Small Grain and Rice)







GRAIN HANDLING:300 Bushel (10,572L) Grain TankGeneral Purpose Grain Handling System

(Corn and Grain)Extended Wear Grain Handling System (Rice)High Capacity 3.3 Bushels Per Second





PowerTech Plus Diesel Engine Technologywith TurboCharger, and Air-to-AirAftercooler360 Hp at 2200 RPM387 Hp Max Power Bulge at 2100 RPM395 Hp Max Unloading Power Boost

Electronically Controlled FuelInjection and Fuel Shutoff

200 AMP Alternator250 Gal. (950 L) Fuel TankRotary Screen Air Intake with Vacuum PickupAutomatically Tensioned Poly-V

Accessory Drive BeltsHigh Capacity Wide Spaced Tube Radiator and



WHEELS AND DRIVES:30.5LR-32 In. Three Star 170A8 (R1)Drive Tires18.4R-26 In. Two Star (R1)

Steering Tires2-Speed ProDrive Transmission withpush button shift and Park Brake (20K Transmission- Export Russia only)Integrated HarvestSmart Feedrate Control SystemHeavy-Duty Final Drive (Corn and

Small Grain)High Clearance Heavy-Duty Final Drive

(Rice)Adjustable Rear Axle with Heavy-Duty

Spindles (Corn and Small Grain)Adjustable Rear Axle with 2-Speed,

4-Wheel Drive (2100cc Displacement) (Rice)




Feederhouse Lift Cylinders3.15 In. (80 mm) Dia. (Corn)2.75 In. (70 mm) Dia. (Small Grain and Rice)


SERVICEABILITY:Full Composite Flip-Open Side Shields

Central Lube ChartsEasy Access Lube BanksHydraulic Diagnostic ReceptaclesSteel Tool Box with Tray

Battery Storage Container to Ground Level -External Battery Posts and Cut-Off Switch





Independent Hydraulic BrakesBack Up AlarmComposite Styling with Air Scoop



Temporary Surface Rust/Corrosion Protection (ExportOnly)LESS HEADER EQUIPMENT


SUGGESTEDLIST PRICE

USD ($)



162KH 9770 STS Corn Combine (Model Year 2011)For use with Non-StalkMaster and StalkMaster Corn Heads up to 12 Rows, 1291 StalkMasterCorn Heads, Platforms up to 35 Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms or size (i.e. 12 Row Corn Heads, or 635Flex).

333,657.00





SUGGESTEDLIST PRICE

USD ($)





Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2805) Round Bar Concave(3530) Deep Tooth Chaffer and Sieve(3825) General Purpose Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-705.00




Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3530) Deep Tooth Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with IntegratedChaff Spreader and Single-Point Adjustable Knife Bank

-1,411.00

0533 Performance Plus with SLS>> Corn and Soybean Customer

> High yielding or high moisture corn> Requires the advantages of extended wear components> Operating on slopes


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3535) Deep Tooth Chaffer and Sieve with SLS(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00





SUGGESTEDLIST PRICE

USD ($)

VALUE PACKAGE CONFIGURATIONS ...Continued...0504 Performance Plus Custom

>> Custom Cutter or Small Grain, Corn and Soybean Customer> Requires small grain harvesting capability> Requires advantages of extended wear components


Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2832) Factory installed Extended Wear Small Wire Concave and ExtendedWear Separator Package (includes 20 Separator Grate Coversand Extended Wear Round Bar Concaves for field installation)(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00

0534 Performance Plus Custom for Large Headers>> Custom Cutter or Small Grain, Corn and Soybean Customer

> Requires small grain harvesting capability> Requires advantages of extended wear components> Operating larger header equipment


Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2832) Factory installed Extended Wear Small Wire Concave and ExtendedWear Separator Package (includes 20 Separator Grate Coversand Extended Wear Round Bar Concaves for field installation)(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00




Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3530) Deep Tooth Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4190) Wide-Spread, Twin Disk Straw Spreader with Integrated ChaffSpreader, Barrier Hoops and In-Cab Variable Speed Control

-1,411.00





SUGGESTEDLIST PRICE

USD ($)


>> Corn and Soybean Customer> High yielding or high moisture corn> Requires the advantages of extended wear components> Operating larger header equipment


Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3530) Deep Tooth Chaffer and Sieve(3865) Extended Wear Grain Handling System with High CapacityUnloading System and 26 Ft. One-Piece Unloading Auger(4170) Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated Chaff Spreaderand PowerCast Powered Tailboard Residue Management System

-1,411.00


In Base Price



In Base Price


1,113.00


3,564.00


3,032.00

FEEDERHOUSE TYPE1525 Level Land Feederhouse with Reverser and High-Torque

Variable Speed Drive SystemRecommended for use with StalkMaster Corn Heads 8 Rows and less, Non-StalkMaster CornHeads 12 Rows and less, Flex Platforms 30 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 25 Ft. and less, and the 615 Belt Pickup. Requires Code 1730.

-5,849.00

1570 Contour-Master Feederhouse with Reverser and High-TorqueVariable Speed Drive SystemRecommended for use with StalkMaster Corn Heads 8 Rows and less, 1291 StalkMaster CornHeads, Non-StalkMaster Corn Heads 12 Rows and less, Flex Platforms 35 Ft. and less, RigidPlatforms 30 Ft. and less, Draper Platforms 40 Ft. and less, and the 615 Belt Pickup.Contour-Master is recommended to maximize performance of 600D Draper Platforms whenoperating in rolling terrain.

In Base Price

1590 Contour-Master Feederhouse with Reverser and CommandTouchMulti-Speed Drive System

6,860.00





SUGGESTEDLIST PRICE

USD ($)

FEEDERHOUSE TYPE ...Continued...Recommended for use with StalkMaster Corn Heads 12 Rows and less, Non-StalkMaster CornHeads 12 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 40 Ft. and less, and the 615 Belt Pickup. Requires Code1730. Contour-Master is recommended to maximize performance of 600D Draper Platformswhen operating in rolling terrain.


For use with StalkMaster and Non-StalkMaster Corn Heads up to 8 Rows, 12-Row 22 In. CornHeads, Platforms up to 35 Ft., 25 Ft., and 30 Ft. Draper Platform and the 615 Belt Pickup.

-912.00


In Base Price




In Base Price


276.00



1,668.00


3,475.00


6,683.00

CHAFFER/SIEVE TYPE





SUGGESTEDLIST PRICE

USD ($)

CHAFFER/SIEVE TYPE ...Continued...3510 General Purpose Adjustable Chaffer and Bottom Sieve



In Base Price


7,044.00


7,044.00




In Base Price


1,021.00


439.00



2,043.00


3,064.00





SUGGESTEDLIST PRICE

USD ($)




3,589.00


8,602.00


4,609.00


3,841.00



4,209.00


5,229.00

RESIDUE DISPOSAL4160 Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated

Chaff Spreader and Single-Point Adjustable Knife BankIn Base Price


5,981.00


-4,088.00

TRANSMISSION





SUGGESTEDLIST PRICE

USD ($)

TRANSMISSION ...Continued...4430 ProDrive Transmission and HarvestSmart Feed Rate Control In Base Price

4440 Less ProDrive Transmission and Less HarvestSmart Feed Rate ControlLess ProDrive Transmission and HarvestSmart.Replaced by standard 3-speed transmission.Not available with Code 1590.

-6,806.00





For Header Sizes up to and including 12-Row Corn,15 Ft. Belt Pickup, 35 Ft. Flexible,30 Ft. Rigid, and 35 Ft. Draper Platforms:For Codes 4582, 4624, 4643, 4646, 4647 and 4650 below, High Flotation Tires include aLadder Landing Extension which will cause ladder interference with the uncut crop whenharvesting with 6 Row Narrow or smaller heads.

The following sizes of Goodyear tires (Ultra-Torque series) are now carrying a universalmetric size rating on the sidewall of the tire:- 20.8R38R1 is labeled 520/85R38 R1- 20.8R42R1 is labeled 520/85R42 R1Due to the metric size dimensions of these tires, there will be a slight difference in the actualsize as compared to the standard U.S. size tires.

4539 800/65R32 172A8 R1 Radial (30.5LR32)Goodyear (Titan Tire) tire is 800/65R32 172A8 R1. Firestone tire is 30.5LR32 R1. If you wantone tire over the other, you need to select a tire preference. If you select no preference, youwill get one or the other. Not for use with 35 Ft. Draper Platforms and 612C StalkMaster CornHead.

In Base Price

4556 800/65R32 172A8 R1WNot for use with 35 Ft. Draper Platforms and 612C StalkMaster Corn Head.

Same Price

4560 800/70R38 173A8 R1W 1,738.00

4565 900/65R32 178A8 R2 RadialAvailable in Goodyear brand only. Not for use with 35 Ft. Draper Platforms and 612CStalkMaster Corn Head.

4,174.00





SUGGESTEDLIST PRICE

USD ($)


Wide Spaced Duals for use in 30 In. RowsIncludes required axle spacer and ladder landing extension. Comparable to 18.4R-42.

8,489.00


5,425.00


9,177.00


10,685.00



1,550.00


1,550.00


15,793.00


14,951.00



-5,156.00


-4,747.00







SUGGESTEDLIST PRICE

USD ($)



1868cc Displacement.2100cc Displacement if Code 4440 Less ProDrive Transmission option is not selected,otherwise 1868cc Displacement.

20,330.00






668.00


686.00

5170 600/65R28 154A8 R1W 1,948.00


1,878.00


2,618.00




-1,766.00



253.00


In Base Price






SUGGESTEDLIST PRICE

USD ($)




406.00



503.00



873.00


646.00


-1,335.00


834.00


-2,657.00




No Charge





SUGGESTEDLIST PRICE

USD ($)




18,330.00


18,330.00


13,619.00




2,511.00



1,496.00





SUGGESTEDLIST PRICE

USD ($)




967.00


191.00


743.00


2,962.00


3,160.00


4,512.00


3,042.00


4,204.00



1,003.00



707.00




178.00





SUGGESTEDLIST PRICE

USD ($)





9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00













SUGGESTEDLIST PRICE

USD ($)




25,533.00

BXE10005 Plumbing, Valves and Hardware for 2100cc 2-Speed, 4-Wheel Drive Motors for AdjustableRear Axle (PIN 735000 to 737298)For use on ProDrive Equipped Combines Only.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). 2-Wheel Drive Axles have a different wheelbolt pattern than is used on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel DriveWheel Rims are required when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed,4-Wheel Drive Rims through Service Parts. See Parts Catalog for correct Tie Rod EndAssemblies. Order separately from PDC.

2,935.00

BXE10101 Plumbing, Valves and Hardware for 2100cc 2-Speed, 4-Wheel Drive Motors for AdjustableRear Axle (PIN 737299 and up)For use on ProDrive Equipped Combines Only.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). 2-Wheel Drive Axles have a different wheelbolt pattern than is used on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel DriveWheel Rims are required when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed,4-Wheel Drive Rims through Service Parts. See Parts Catalog for correct Tie Rod EndAssemblies. Order separately from PDC.

2,935.00


3,204.00


3,204.00







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH90100 TouchSet Automatic Combine Adjustment for 60 and 70 Series

Combines only with TouchSet In-Cab DisplayIncludes: TouchSet Cornerpost Display, Wiring Harness, Actuators for Chaffer and Sieve,Ground Level Activation Switches, Circuit Board, Wedge Box and Software. Requires Chafferand Sieve elements for use with TouchSet Remote Shoe Feature. Order through Service Parts.

1,848.00


2,511.00





See Parts


See Parts


See Parts


See Parts


707.00



872.00


1,220.00


1,496.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH81489 Feed Accelerator Smooth Wear Strips (Set of 30)

For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops suchas popcorn, food corn, etc. Not for use in Rice.

290.00


1,054.00


9,192.00

BH84447 High Torque, Posi-Torq Variable Speed Feederhouse Drive Conversionfor combines equipped with the Heavy Duty Posi-Torq Variable SpeedDrive SystemRecommended for use with chopping corn heads 8 Rows and larger, or high yielding greenstem corn conditions with non-chopping corn heads 12 Rows and larger. For 9660 STS,9670STS, 9760 STS, 9770STS, 9860 STS and 9870 STS combines.

5,929.00




288.00


447.00


See Parts







1,359.00



825.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84501 Service Lights 624.00



BH90152 Spreader to Wingblade Chopper with 12 Vane Tailboard and DrivesFor 9770 STS and 9870 STS Only.

11,661.00


1,507.00



200.00




2,202.00


672.00


1,474.00




5,617.00



5,617.00





SUGGESTEDLIST PRICE

USD ($)




743.00


471.00


2,962.00


4,204.00


4,512.00


3,042.00


967.00


191.00


3,160.00


854.00




9770 STS COMBINE































































































SUGGESTEDLIST PRICE

USD ($)



162LH 9770 STS Small Grain Combine (Model Year 2011)For use with Non-StalkMaster and StalkMaster Corn Heads up to 12 Rows, 1291 StalkMasterCorn Heads, Platforms up to 35 Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms or size (i.e. 12 Row Corn Heads, or 635Flex).

332,100.00





SUGGESTEDLIST PRICE

USD ($)





Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(2810) Small Wire Concave(3510) General Purpose Chaffer and Sieve(3825) General Purpose Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with IntegratedChaff Spreader and Single-Point Adjustable Knife Bank

-705.00




Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(2830) Extended Wear Small Wire Concave and Extended WearSeparator Package(3510) General Purpose Chaffer and Sieve(3825) General Purpose Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00




Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(2830) Extended Wear Small Wire Concave and Extended WearSeparator Package(3515) General Purpose Chaffer and Sieve with SLS(3825) General Purpose Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00





SUGGESTEDLIST PRICE

USD ($)




Features:(1585) Contour-Master Feederhouse with Reverser and High-TorqueFixed Speed Drive System(1730) 80 mm Feederhouse Lift Cylinders(2830) Extended Wear Small Wire Concave and Extended WearSeparator Package(3510) General Purpose Chaffer and Sieve(3855) General Purpose Grain Handling System with High CapacityUnloading System and 26 Ft. One-Piece Unloading Auger(4170) Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated Chaff Spreaderand PowerCast Powered Tailboard Residue Management System

-1,411.00


In Base Price



In Base Price


1,113.00


3,564.00


3,032.00



-687.00


-5,849.00

1570 Contour-Master Feederhouse with Reverser and High-TorqueVariable Speed Drive SystemRecommended for use with StalkMaster Corn Heads 8 Rows and less, 1291 StalkMaster CornHeads, Non-StalkMaster Corn Heads 12 Rows and less, Flex Platforms 35 Ft. and less, RigidPlatforms 30 Ft. and less, Draper Platforms 40 Ft. and less, and the 615 Belt Pickup.Contour-Master is recommended to maximize performance of 600D Draper Platforms when

5,161.00





SUGGESTEDLIST PRICE

USD ($)

FEEDERHOUSE TYPE ...Continued...operating in rolling terrain.

1585 Contour-Master Feederhouse with Reverser and High-TorqueFixed Speed Drive SystemRecommended for use with StalkMaster Corn Heads 12 Rows and less except for 12 row 30 In.spacing, Non-StalkMaster Corn Heads 12 Rows and less, Flex Platforms 35 Ft. and less, RigidPlatforms 30 Ft. and less, Draper Platforms 40 Ft. and less, and the 615 Belt Pickup.Contour-Master is recommended to maximize performance of 600D Draper Platforms whenoperating in rolling terrain.

In Base Price

1590 Contour-Master Feederhouse with Reverser and CommandTouchMulti-Speed Drive SystemRecommended for use with StalkMaster Corn Heads 12 Rows and less, Non-StalkMaster CornHeads 12 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 40 Ft. and less, and the 615 Belt Pickup. Contour-Master is recommendedto maximize performance of 600D Draper Platforms when operating in rolling terrain.

12,178.00



In Base Price


912.00




In Base Price


1,229.00


-107.00



3,093.00





SUGGESTEDLIST PRICE

USD ($)



3,475.00


3,475.00



7,044.00




In Base Price


1,021.00


439.00



2,043.00





SUGGESTEDLIST PRICE

USD ($)

GRAIN HANDLING AND UNLOADING SYSTEMS ...Continued...3857 General Purpose Grain Handling System with High Capacity Unloading System and 26 Ft.

(7.9M) 2-Piece Unloading Auger (Export only)Unloading Auger unassembled and crated; requires Dealer installation.

3,064.00



3,589.00


8,602.00


4,609.00


3,841.00



4,209.00


5,229.00




5,981.00


-4,088.00





SUGGESTEDLIST PRICE

USD ($)

RESIDUE DISPOSAL ...Continued...

TRANSMISSION4430 ProDrive Transmission and HarvestSmart Feed Rate Control In Base Price

4440 Less ProDrive Transmission and Less HarvestSmart Feed Rate ControlLess ProDrive Transmission and HarvestSmart.Replaced by standard 3-speed transmission.Not available with Code 1590.

-6,806.00








In Base Price


Same Price

4560 800/70R38 173A8 R1W 1,738.00





SUGGESTEDLIST PRICE

USD ($)


Available in Goodyear brand only. Not for use with 35 Ft. Draper Platforms and 612CStalkMaster Corn Head.

4,174.00


8,489.00


5,425.00


9,177.00


10,685.00



1,550.00


1,550.00


15,793.00


14,951.00



-5,156.00


-4,747.00






SUGGESTEDLIST PRICE

USD ($)



4950 Fixed Rear Axle with Heavy-Duty Spindles -514.00


1868cc Displacement.2100cc Displacement if Code 4440 Less ProDrive Transmission option is not selected,otherwise 1868cc Displacement.

20,330.00






668.00


686.00

5170 600/65R28 154A8 R1W 1,948.00


1,878.00


2,618.00




-1,766.00



253.00





SUGGESTEDLIST PRICE

USD ($)

TEMPORARY RUST PROTECTION ...Continued...6705 Less Temporary Surface Rust/Corrosion Protection

Not Available for Export.In Base Price




793.00


406.00



503.00



873.00


646.00


-1,335.00


834.00


-2,657.00






SUGGESTEDLIST PRICE

USD ($)




No Charge



18,330.00


18,330.00


13,619.00




2,511.00





SUGGESTEDLIST PRICE

USD ($)




1,496.00



967.00


191.00


743.00


2,962.00


3,160.00


4,512.00


3,042.00


4,204.00



707.00




178.00





SUGGESTEDLIST PRICE

USD ($)





9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00













SUGGESTEDLIST PRICE

USD ($)




25,533.00


2,935.00


2,935.00


3,204.00


3,204.00







SUGGESTEDLIST PRICE

USD ($)



1,848.00


2,511.00





See Parts


See Parts


See Parts


See Parts


707.00



872.00


1,220.00


1,496.00





SUGGESTEDLIST PRICE

USD ($)



290.00


1,054.00


9,192.00


5,929.00




288.00


447.00


See Parts







1,359.00



825.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84501 Service Lights 624.00




11,661.00


1,507.00



200.00




2,202.00


672.00


1,474.00




5,617.00



5,617.00





SUGGESTEDLIST PRICE

USD ($)




743.00


471.00


2,962.00


4,204.00


4,512.00


3,042.00


967.00


191.00


3,160.00


854.00




9770 STS COMBINE































































































SUGGESTEDLIST PRICE

USD ($)



162MH 9770 STS Rice Combine (Model Year 2011)For use with Non-StalkMaster and StalkMaster Corn Heads up to 12 Rows, 1291 StalkMasterCorn Heads, Platforms up to 35 Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms or size (i.e. 12 Row Corn Heads, or 635Flex).

358,262.00





SUGGESTEDLIST PRICE

USD ($)





Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(2828) Extended Wear Large Wire Concave and Extended WearSeparator Package(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4190) Wide-Spread, Twin Disk Straw Spreader with Integrated ChaffSpreader, Barrier Hoops and In-Cab Variable Speed Control

-1,411.00




Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2828) Extended Wear Large Wire Concave and Extended WearSeparator Package(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4190) Wide-Spread, Twin Disk Straw Spreader with Integrated ChaffSpreader, Barrier Hoops and In-Cab Variable Speed Control

-1,411.00




Features:(1530) Level Land Feederhouse with Fixed Speed Drive(1720) 70 mm Feederhouse Lift Cylinders(2828) Extended Wear Large Wire Concave and Extended WearSeparator Package(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with IntegratedChaff Spreader and Single-Point Adjustable Knife Bank

-1,411.00





SUGGESTEDLIST PRICE

USD ($)




Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2828) Extended Wear Large Wire Concave and Extended WearSeparator Package(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with IntegratedChaff Spreader and Single-Point Adjustable Knife Bank

-1,411.00


In Base Price



In Base Price


1,113.00


3,564.00


3,032.00



5,161.00


In Base Price

1570 Contour-Master Feederhouse with Reverser and High-TorqueVariable Speed Drive SystemRecommended for use with StalkMaster Corn Heads 8 Rows and less, 1291 StalkMaster CornHeads, Non-StalkMaster Corn Heads 12 Rows and less, Flex Platforms 35 Ft. and less, RigidPlatforms 30 Ft. and less, Draper Platforms 40 Ft. and less, and the 615 Belt Pickup.Contour-Master is recommended to maximize performance of 600D Draper Platforms whenoperating in rolling terrain.

11,010.00





SUGGESTEDLIST PRICE

USD ($)

FEEDERHOUSE TYPE ...Continued...1590 Contour-Master Feederhouse with Reverser and CommandTouch

Multi-Speed Drive SystemRecommended for use with StalkMaster Corn Heads 12 Rows and less, Non-StalkMaster CornHeads 12 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 40 Ft. and less, and the 615 Belt Pickup. Contour-Master is recommendedto maximize performance of 600D Draper Platforms when operating in rolling terrain.

18,206.00



In Base Price


912.00




-1,806.00


In Base Price



7,044.00






SUGGESTEDLIST PRICE

USD ($)




In Base Price


5,013.00


992.00


439.00



620.00


1,612.00




-4,088.00


4440 Less ProDrive Transmission and Less HarvestSmart Feed Rate Control -6,806.00





SUGGESTEDLIST PRICE

USD ($)

TRANSMISSION ...Continued...Less ProDrive Transmission and HarvestSmart.Replaced by standard 3-speed transmission.Not available with Code 1590.



Same Price


In Base Price







In Base Price


Same Price


1,738.00





SUGGESTEDLIST PRICE

USD ($)


Available in Goodyear brand only. Not recommended for use when equipped with Code 4330(High Clearance Final Drive). Not for use with 35 Ft. Draper Platforms and 612C StalkMasterCorn Head.

4,174.00


8,489.00


5,425.00


9,177.00


10,685.00



1,550.00


1,550.00


15,793.00


14,951.00



-5,156.00


-4,747.00





SUGGESTEDLIST PRICE

USD ($)










668.00


686.00

5170 600/65R28 154A8 R1W 1,948.00


1,878.00


2,618.00




-1,766.00



253.00

6705 Less Temporary Surface Rust/Corrosion Protection In Base Price





SUGGESTEDLIST PRICE

USD ($)

TEMPORARY RUST PROTECTION ...Continued...Not Available for Export.




406.00


503.00



873.00


646.00


-1,335.00


834.00


-2,657.00




No Charge





SUGGESTEDLIST PRICE

USD ($)




18,330.00


18,330.00


13,619.00




2,511.00



1,496.00





SUGGESTEDLIST PRICE

USD ($)




967.00


191.00


743.00


2,962.00


3,160.00


4,512.00


3,042.00


4,204.00

9280 Enhanced Rice Performance BundleFor 9670STS Rice, 9770STS Rice, 9660STS Rice, 9760STS Rice and 9860STS Rice Combines.Includes Tine Feed Accelerator (65 Tines), "Comb" feed section floor, Eighteen Threshing STSRotor Tines, Two Rotor Discharge Paddles and Discharge Concave.Note: 60 Series Combines also require Discharge Housing ordered through Service Parts.

6,093.00



1,003.00



707.00







SUGGESTEDLIST PRICE

USD ($)





9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00













SUGGESTEDLIST PRICE

USD ($)




25,533.00


2,935.00


2,935.00


3,204.00


3,204.00







SUGGESTEDLIST PRICE

USD ($)



1,848.00


2,511.00





See Parts


See Parts


See Parts


See Parts


707.00



872.00


1,220.00


1,496.00





SUGGESTEDLIST PRICE

USD ($)



290.00


1,054.00


9,192.00


5,929.00




447.00


See Parts







1,359.00



825.00






SUGGESTEDLIST PRICE

USD ($)





11,661.00


1,507.00



200.00




2,202.00


672.00


1,474.00




5,617.00



5,617.00





SUGGESTEDLIST PRICE

USD ($)




743.00


471.00

BH84627 Enhanced Rice Performance BundleFor 9670STS Rice, 9770STS Rice, 9660STS Race, 9760STS Rice and 9860STS Rice Combines.Includes Tine Feed Accelerator (65 Tines), "Comb" feed section floor, Eighteen Threshing STSRotor Tines, Two Rotor Discharge Paddles and Discharge Concave.Note: 60 Series Combines also require Discharge Housing ordered through Service Parts.

6,093.00


2,962.00


4,204.00


4,512.00


3,042.00


967.00


191.00


3,160.00


854.00




9870 STS COMBINE














Control or Feederhouse BackshaftSpeed














Integral Turn Signals (4)Rotating beacon lights with Grain Cart Call (3)SideFinder Lights (2)Cleaning Shoe Lights (2)Exit LightingRear Residue Discharge Lights (2)Stubble Lights (2)Deceleration Warning Light


CommandTouch Multi-Speed Drive System (Corn)Contour-Master Feederhouse with Reverser and


Level Land Feederhouse with Reverser andHigh-Torque Fixed Speed Drive System(Rice)






















Non-Adjustable Front ChafferFixed Mid ChafferSeparator Air Discharge Chute Agitators












PowerTech Plus Diesel Engine Technology withTurboCharger, and Air-to-Air Aftercooler440 Hp at 2200 RPM470 Hp Max Power Bulge at 2100 RPM473 Hp Max Unloading Power Boost


200 AMP Alternator305 Gal. (1155 L) Fuel TankRotary Screen Air Intake with Vacuum PickupHigh Capacity Engine Pre-Cleaner

and Air FilterHigh Capacity Wide Spaced Tube Radiator and

Air Scoop Cooling TechnologyAutomatically Tensioned Poly-V

Accessory Drive BeltsExport Complaint Power unit. (Export only exceptAustralia and Mexico)

WHEELS AND DRIVES:800/65R32 172A8 R1W Drive Tires480/70R30 152A8 R1W Steering Tires2-Speed ProDrive Transmission withpush button shift,Park Brake and Differential Lock (20K Transmission- Export Russia only)Integrated HarvestSmart Feedrate Control SystemHeavy-Duty Final Drive (Corn and



Spindles (Corn and Small Grain)

Adjustable Rear Axle with 2-Speed,4-Wheel Drive (2100cc Displacement) (Rice)



















SUGGESTEDLIST PRICE

USD ($)



163KH 9870 STS Corn Combine (Model Year 2011)For use with Non-StalkMaster and StalkMaster Corn Heads up to 12 Rows, Platforms up to 35Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms (i.e. 12 Row Corn Heads or 635 Flex).

364,804.00





SUGGESTEDLIST PRICE

USD ($)





Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2805) Round Bar Concave(3530) Deep Tooth Chaffer and Sieve(3825) General Purpose Grain Handling System with High Capacity



-705.00




Features:(1570) Contour-Master Feederhouse with High-Torque Variable Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3530) Deep Tooth Chaffer and Sieve(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with IntegratedChaff Spreader and Single-Point Adjustable Knife Bank

-1,411.00

0533 Performance Plus with SLS>> Corn and Soybean Customer

> High yielding or high moisture corn> Requires the advantages of extended wear components> Operating on slopes


Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3535) Deep Tooth Chaffer and Sieve with SLS(3835) Extended Wear Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wide Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00





SUGGESTEDLIST PRICE

USD ($)

VALUE PACKAGE CONFIGURATIONS ...Continued...0504 Performance Plus Custom

>> Custom Cutter or Small Grain, Corn and Soybean Customer> Requires small grain harvesting capability> Requires advantages of extended wear components


Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2832) Factory installed Extended Wear Small Wire Concave and Extended

Wear Separator Package (includes 20 Separator Grate Coversand Extended Wear Round Bar Concaves for field installation)

(3510) General Purpose Chaffer and Sieve(3835) Extended Wear Grain Handling System with High Capacity



-1,411.00




Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2825) Extended Wear Round Bar Concave and Extended Wear




-1,411.00

0535 Performance Plus for Large Headers>> Corn and Soybean Customer

> High yielding or high moisture corn> Requires the advantages of extended wear components> Operating larger header equipment


Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2825) Extended Wear Round Bar Concave and Extended WearSeparator Package(3530) Deep Tooth Chaffer and Sieve(3865) Extended Wear Grain Handling System with High CapacityUnloading System and 26 Ft. One-Piece Unloading Auger(4170) Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated Chaff Spreaderand PowerCast Powered Tailboard Residue Management System

-1,411.00


In Base Price


Includes base cab with windshield washer and radio ready (two pre-wired speakers andIn Base Price





SUGGESTEDLIST PRICE

USD ($)

CAB TYPE ...Continued...antenna).


1,113.00


3,564.00


3,032.00

FEEDERHOUSE TYPE1590 Contour-Master Feederhouse with Reverser and CommandTouch

Multi-Speed Drive SystemRecommended for use with StalkMaster Corn Heads 12 Rows and less, Non-StalkMaster CornHeads 12 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 40 Ft. and less, and the 615 Belt Pickup. Requires Code1730. Contour-Master is recommended to maximize performance of 600D Draper Platformswhen operating in rolling terrain.

In Base Price



-912.00


In Base Price




In Base Price


276.00





SUGGESTEDLIST PRICE

USD ($)




1,668.00


3,475.00


6,683.00

CHAFFER/SIEVE TYPE3510 General Purpose Adjustable Chaffer and Bottom Sieve



In Base Price


7,044.00


7,044.00






SUGGESTEDLIST PRICE

USD ($)




In Base Price


1,021.00


439.00



2,043.00


3,064.00



3,589.00


8,602.00


4,609.00


3,841.00





SUGGESTEDLIST PRICE

USD ($)




4,209.00


5,229.00




5,981.00


-4,088.00









SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS AND TIRES ...Continued...




In Base Price

4560 800/70R38 173A8 R1W 1,738.00


4,174.00


8,489.00


5,425.00


9,177.00


10,685.00



1,550.00


1,550.00


15,793.00





SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS AND TIRES ...Continued...4582 76X50-32 HF3 16PR High Flotation

Available in Firestone brand only. Requires Code 9988 (No Charge). Includes required axlespacer and ladder landing extension.

14,951.00



-5,156.00


-4,747.00







For use with or without 4-Wheel Drive:5160 480/70R30 152A8 R1W

For adjustable rear axle only.In Base Price

5170 600/65R28 154A8 R1W 1,262.00


1,192.00


1,932.00







SUGGESTEDLIST PRICE

USD ($)

STEERING WHEELS AND TIRES ...Continued...5199 Less Steering Wheels and Tires




253.00


In Base Price




406.00



503.00


873.00


646.00


-1,335.00


834.00


-2,657.00





SUGGESTEDLIST PRICE

USD ($)


Miscellaneous:7480 Intelligent Power Management for 12-Row StalkMaster Chopping

Corn HeadAdds 40 Hp at rated engine speed. Only available when a 612C StalkMaster Chopping CornHead is connected to the combine. Also requires Code 1590 and 1730. Not available for exportexcept Australia and Mexico.

2,853.00




No Charge



18,330.00


18,330.00


13,619.00





SUGGESTEDLIST PRICE

USD ($)





2,511.00



1,496.00



967.00


191.00


743.00


2,962.00


3,160.00


4,512.00


3,042.00


4,204.00



1,003.00





SUGGESTEDLIST PRICE

USD ($)



Recommended for sidehill conditions to reduce grain loss. Includes grain return pan partition,chaffer dividers, grain agitator paddles, and attaching hardware. Not for use with Code 3535or 3515.

707.00




178.00




9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00






SUGGESTEDLIST PRICE

USD ($)









2-Speed, 4-Wheel Drive Conversions:BXE10006 Plumbing, Valves and Hardware for 2100cc 2-Speed, 4-Wheel Drive Motors for Adjustable

Rear Axle (PIN 730000 to 736085)For use on ProDrive Equipped Combines Only.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts. (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). 2-Wheel Drive Axles have a different wheelbolt pattern than is used on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel DriveWheel Rims are required when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed,4-Wheel Drive Rims through Service Parts. See Parts Catalog for correct Tie Rod EndAssemblies. Order separately from PDC.

3,772.00

BXE10102 Plumbing, Valves and Hardware for 2100cc 2-Speed, 4-Wheel Drive Motors for AdjustableRear Axle (PIN 736086 and up)For use on ProDrive Equipped Combines Only.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts. (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). 2-Wheel Drive Axles have a different wheelbolt pattern than is used on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel DriveWheel Rims are required when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed,4-Wheel Drive Rims through Service Parts. See Parts Catalog for correct Tie Rod EndAssemblies. Order separately from PDC.

3,772.00




1,848.00


2,511.00






SUGGESTEDLIST PRICE

USD ($)





See Parts


See Parts


See Parts

BH84524 SideHill Performance PackageRecommended for sidehill conditions to reduce grain loss. Includes grain return pan partition,chaffer dividers, grain agitator paddles, and attaching hardware. Not for use with Code 3535or 3515.

707.00



872.00


1,220.00


1,496.00


290.00


1,054.00


9,192.00


5,929.00





SUGGESTEDLIST PRICE

USD ($)





288.00


447.00


See Parts







1,359.00



825.00





11,661.00


1,507.00



200.00





SUGGESTEDLIST PRICE

USD ($)





2,202.00


672.00


1,474.00




5,617.00



5,617.00



743.00


471.00


2,962.00


4,204.00


4,512.00


3,042.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84534 Sectionalized Concave Cover Plates (Set of 3 covers with 4 pieces to make one complete


967.00


191.00


3,160.00


854.00




9870 STS COMBINE































































































SUGGESTEDLIST PRICE

USD ($)



163LH 9870 STS Small Grain Combine (Model Year 2011)For use with Non-StalkMaster and StalkMaster Corn Heads up to 12 Rows, Platforms up to 35Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms (i.e. 12 Row Corn Heads or 635 Flex).

362,813.00





SUGGESTEDLIST PRICE

USD ($)





Features:(1540) Level Land Feederhouse with High-Torque Fixed Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2810) Small Wire Concave(3510) General Purpose Chaffer and Sieve(3825) General Purpose Grain Handling System with High Capacity



-705.00




Features:(1540) Level Land Feederhouse with High-Torque Fixed Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2830) Extended Wear Small Wire Concave and Extended Wear

Separator Package(3510) General Purpose Chaffer and Sieve(3825) General Purpose Grain Handling System with High Capacity



-1,411.00




Features:(1540) Level Land Feederhouse with High-Torque Fixed Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2830) Extended Wear Small Wire Concave and Extended WearSeparator Package(3515) General Purpose Chaffer and Sieve with SLS(3825) General Purpose Grain Handling System with High CapacityUnloading System and 22.5 Ft. One-Piece Unloading Auger(4160) Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreaderand Single-Point Adjustable Knife Bank

-1,411.00





SUGGESTEDLIST PRICE

USD ($)




Features:(1585) Contour-Master Feederhouse with Reverser and High-TorqueFixed Speed Drive System(1730) 80 mm Feederhouse Lift Cylinders(2830) Extended Wear Small Wire Concave and Extended WearSeparator Package(3510) General Purpose Chaffer and Sieve(3855) General Purpose Grain Handling System with High CapacityUnloading System and 26 Ft. One-Piece Unloading Auger(4170) Wing Blade Wide-Spread, Fine Cut, 2-Speed Straw Chopper, Integrated Chaff Spreaderand PowerCast Powered Tailboard Residue Management System

-1,411.00


In Base Price



In Base Price


1,113.00


3,564.00


3,032.00


Fixed Speed Drive SystemRecommended for use with Rigid Platforms 30 Ft. and less, Draper Platforms 25 Ft. and less,and the 615 Belt Pickup.

-5,849.00

1585 Contour-Master Feederhouse with Reverser and High-TorqueFixed Speed Drive SystemRecommended for use with StalkMaster Corn Heads 12 Rows and less except for 12 row 30 In.spacing, Non-StalkMaster Corn Heads 12 Rows and less, Flex Platforms 35 Ft. and less, RigidPlatforms 30 Ft. and less, Draper Platforms 40 Ft. and less, and the 615 Belt Pickup. RequiresCode 1730. Contour-Master is recommended to maximize performance of 600D DraperPlatforms when operating in rolling terrain.

In Base Price

1590 Contour-Master Feederhouse with Reverser and CommandTouchMulti-Speed Drive SystemRecommended for use with StalkMaster Corn Heads 12 Rows and less, Non-StalkMaster Corn

10,821.00





SUGGESTEDLIST PRICE

USD ($)

FEEDERHOUSE TYPE ...Continued...Heads 12 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 40 Ft. and less, and the 615 Belt Pickup. Requires Code1730. Contour-Master is recommended to maximize performance of 600D Draper Platformswhen operating in rolling terrain.



In Base Price


912.00




In Base Price


1,229.00


-107.00



3,093.00


3,475.00


3,475.00

CHAFFER/SIEVE TYPE





SUGGESTEDLIST PRICE

USD ($)

CHAFFER/SIEVE TYPE ...Continued...3510 General Purpose Adjustable Chaffer and Bottom Sieve In Base Price


7,044.00




In Base Price


1,021.00


439.00



2,043.00


3,064.00



3,589.00





SUGGESTEDLIST PRICE

USD ($)

GRAIN HANDLING AND UNLOADING SYSTEMS ...Continued...3836 Extended Wear Grain Handling System with High Capacity Unloading

and Powered Folding of the end of the Unloading Auger - Unloadlength 22.5 Ft. (6.9M)

8,602.00


4,609.00


3,841.00



4,209.00


5,229.00




5,981.00


-4,088.00


4440 Less ProDrive Transmission and Less HarvestSmart Feed Rate ControlLess ProDrive Transmission, Differential Lock and HarvestSmart.Replaced by standard 3-speed transmission.Not available with Code 1590.

-7,486.00






SUGGESTEDLIST PRICE

USD ($)







In Base Price

4560 800/70R38 173A8 R1W 1,738.00


4,174.00


8,489.00


5,425.00


9,177.00


10,685.00





SUGGESTEDLIST PRICE

USD ($)




1,550.00


1,550.00


15,793.00


14,951.00



-5,156.00


-4,747.00











SUGGESTEDLIST PRICE

USD ($)

STEERING WHEELS AND TIRES ...Continued...



5170 600/65R28 154A8 R1W 1,262.00


1,192.00


1,932.00




-2,143.00



253.00


In Base Price




793.00


406.00



503.00


873.00

7505 Manual Rear Hitch with Wiring Harness for Towing Header Trailer - (For Export Only, NotAvailable for Australia)

646.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...Rated 4500 Kg. Some exceptions apply. Check LOCAL REGULATIONS.


-1,335.00


834.00


-2,657.00



2,853.00




No Charge



18,330.00





SUGGESTEDLIST PRICE

USD ($)



18,330.00


13,619.00




2,511.00



1,496.00



967.00


191.00


743.00


2,962.00





SUGGESTEDLIST PRICE

USD ($)



3,160.00


4,512.00


3,042.00


4,204.00



707.00




178.00




9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00

9750 18 In. (454 mm) Axle Spacer 2,641.00





SUGGESTEDLIST PRICE

USD ($)




No Charge


524.00


524.00











25,533.00

BXE10006 Plumbing, Valves and Hardware for 2100cc 2-Speed, 4-Wheel Drive Motors for AdjustableRear Axle (PIN 730000 to 736085)For use on ProDrive Equipped Combines Only.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts. (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). 2-Wheel Drive Axles have a different wheelbolt pattern than is used on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel DriveWheel Rims are required when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed,4-Wheel Drive Rims through Service Parts. See Parts Catalog for correct Tie Rod EndAssemblies. Order separately from PDC.

3,772.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BXE10102 Plumbing, Valves and Hardware for 2100cc 2-Speed, 4-Wheel Drive Motors for Adjustable

Rear Axle (PIN 736086 and up)For use on ProDrive Equipped Combines Only.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts. (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). 2-Wheel Drive Axles have a different wheelbolt pattern than is used on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel DriveWheel Rims are required when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed,4-Wheel Drive Rims through Service Parts. See Parts Catalog for correct Tie Rod EndAssemblies. Order separately from PDC.

3,772.00


3,204.00


3,204.00




1,848.00


2,511.00





See Parts





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...AH212249 Deep Tooth Sieve

For use in high yielding/high moisture crops. Recommended to be used in conjunction withDeep Tooth Chaffer. Not recommended for use in food corn, popcorn or small grains. Forcombines without TouchSet Remote Combine Adjustment.

See Parts


See Parts


707.00



872.00


1,220.00


1,496.00


290.00


1,054.00


9,192.00


5,929.00




288.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84034 Slow Speed Clean Grain Elevator Drive

Reduces speed of Clean Grain Elevator from 400 RPM to 250 RPM. Recommended for ediblebeans or soybeans only. Not recommended for crops in excess of 50 bushel/acre yield. Refer tothe Agricultural Sales Manual for additional ordering information and GreenStar limitations.

447.00


See Parts







1,359.00



825.00





11,661.00


1,507.00



200.00







SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH80837 18 In. (454 mm) Axle Spacer

For 40 In. rows with 30.5L-32 In. 14PR Drive Tires. Requires 55 In. (1390 mm) LadderExtension. For 38 In. and 40 In. rows with 24.5L-32 In. Drive Tires. Requires 55 In. (1390mm) Ladder Extension.

2,202.00


672.00


1,474.00




5,617.00



5,617.00



743.00


471.00


2,962.00


4,204.00


4,512.00


3,042.00


967.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84535 Sectionalized Concave Cover Plates (Set of 3) Round Bar Concaves only

This cover assembly is used to even out the distribution of crop to the cleaning shoe.191.00


3,160.00


854.00




9870 STS COMBINE































































































SUGGESTEDLIST PRICE

USD ($)



163MH 9870 STS Rice Combine (Model Year 2011)For use with Non-StalkMaster and StalkMaster Corn Heads up to 12 Rows, Platforms up to 35Ft., Draper Platforms up to 40 Ft., and the 615 Belt Pickup.Some options may be required for specific Platforms (i.e. 12 Row Corn Heads or 635 Flex).

388,740.00





SUGGESTEDLIST PRICE

USD ($)





Features:(1540) Level Land Feederhouse with High-Torque Fixed Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2828) Extended Wear Large Wire Concave and Extended Wear




-1,411.00




Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2828) Extended Wear Large Wire Concave and Extended Wear




-1,411.00




Features:(1540) Level Land Feederhouse with High-Torque Fixed Speed Drive(1730) 80 mm Feederhouse Lift Cylinders(2828) Extended Wear Large Wire Concave and Extended Wear




-1,411.00





SUGGESTEDLIST PRICE

USD ($)




Features:(1590) Contour-Master Feederhouse with CommandTouch Multi-Speed Drive(1730) 80 mm Feederhouse LIft Cylinders(2828) Extended Wear Large Wire Concave and Extended Wear




-1,411.00


In Base Price



In Base Price


1,113.00


3,564.00


3,032.00


Fixed Speed Drive SystemRecommended for use with Rigid Platforms 30 Ft. and less, Draper Platforms 25 Ft. and less,and the 615 Belt Pickup.

In Base Price

1590 Contour-Master Feederhouse with Reverser and CommandTouchMulti-Speed Drive SystemRecommended for use with StalkMaster Corn Heads 12 Rows and less, Non-StalkMaster CornHeads 12 Rows and less, Flex Platforms 35 Ft. and less, Rigid Platforms 30 Ft. and less,Draper Platforms 40 Ft. and less, and the 615 Belt Pickup. Requires Code1730. Contour-Master is recommended to maximize performance of 600D Draper Platformswhen operating in rolling terrain.

16,848.00


For use with StalkMaster and Non-StalkMaster Corn Heads up to 8 Rows, 12-Row 22 In. CornIn Base Price





SUGGESTEDLIST PRICE

USD ($)

FEEDERHOUSE LIFT CYLINDERS ...Continued...Heads, Platforms up to 35 Ft., 25 Ft., and 30 Ft. Draper Platform and the 615 Belt Pickup.


912.00




-1,806.00


In Base Price



7,044.00




In Base Price


5,013.00





SUGGESTEDLIST PRICE

USD ($)

GRAIN HANDLING AND UNLOADING SYSTEMS ...Continued...3837 Extended Wear Grain Handling System with High Capacity Unloading

System and 22.5 Ft. (6.9M) 1-Piece Unloading Auger (Export only)Unloading Auger unassembled and crated; requires Dealer installation.

992.00


439.00



620.00


1,612.00




-4,088.00



Same Price


In Base Price



For tire preference choice, see "Attachments - Order as Desired, Tire Brand Preference"





SUGGESTEDLIST PRICE

USD ($)

DRIVE WHEELS AND TIRES ...Continued...listing.-Tires are available in Firestone or Goodyear unless otherwise noted.-If only one tire brand is listed, then code 9988 (No Brand Preference) is required.-If a tire preference code is NOT chosen, then code 9988 (No Brand Preference) is assumedand the brand is determined by the factory.-Steering tire brand preference is determined by drive tire and brand preference choice.




In Base Price


1,738.00

4565 900/65R32 178A8 R2 RadialAvailable in Goodyear brand only. Not recommended for use when equipped with Code 4330(High Clearance Final Drive). Not for use with 35 Ft. Draper Platforms and 612C StalkMasterCorn Head.

4,174.00


8,489.00


5,425.00


9,177.00


10,685.00





SUGGESTEDLIST PRICE

USD ($)




1,550.00


1,550.00


15,793.00


14,951.00



-5,156.00


-4,747.00










SUGGESTEDLIST PRICE

USD ($)

STEERING WHEELS AND TIRES ...Continued...Refer to the Tire Compatibility Charts shown in the "Tire Information" section of theAgricultural Sales Manual to verify front-to-rear compatibility, height profile for tire, andwheel spindle selection.



5170 600/65R28 154A8 R1W 1,262.00


1,192.00


1,932.00




-2,143.00



253.00


In Base Price




406.00


503.00


873.00


646.00

7700 SideHill Ready Configuration for combines ordered with Dual Wheel -1,335.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...Drive TiresIncludes BH81747, less Axle Spacer and Truss Rod. Reference DTAC Solution 61907 forinformation needed for proper wheel and tire equipment in a sidehill application.Not available with Code 3535 or 3515 SLS (Self Leveling Shoe).


834.00


-2,657.00



2,853.00




No Charge



18,330.00





SUGGESTEDLIST PRICE

USD ($)



18,330.00


13,619.00




2,511.00



1,496.00



967.00


191.00


743.00


2,962.00





SUGGESTEDLIST PRICE

USD ($)



3,160.00


4,512.00


3,042.00


4,204.00

9284 Enhanced Rice Performance BundleFor 9870 STS Rice Combine.Includes Tine Feed Accelerator (65 Tines), "Comb" feed section floor, Eighteen Threshing STSRotor Tines, Two Rotor Discharge Paddles.

5,303.00



1,003.00



707.00






9712 6.5 In. (165mm) Axle Spacer 1,811.00


1,474.00

9730 12 In. (300 mm) Axle Spacer 2,201.00

9740 16 In. (400 mm) Axle Spacer 2,390.00





SUGGESTEDLIST PRICE

USD ($)


9750 18 In. (454 mm) Axle Spacer 2,641.00



No Charge


524.00


524.00









2-Speed, 4-Wheel Drive Conversions:BXE10006 Plumbing, Valves and Hardware for 2100cc 2-Speed, 4-Wheel Drive Motors for Adjustable

Rear Axle (PIN 730000 to 736085)For use on ProDrive Equipped Combines Only.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts. (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). 2-Wheel Drive Axles have a different wheelbolt pattern than is used on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel DriveWheel Rims are required when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed,4-Wheel Drive Rims through Service Parts. See Parts Catalog for correct Tie Rod EndAssemblies. Order separately from PDC.

3,772.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BXE10102 Plumbing, Valves and Hardware for 2100cc 2-Speed, 4-Wheel Drive Motors for Adjustable

Rear Axle (PIN 736086 and up)For use on ProDrive Equipped Combines Only.Requires Right Hand and Left Hand 2100cc 4-Wheel Drive Motors be ordered through ServiceParts. (AXE13833/AXE13834). Must also order steering arms (H227051/H227050) along withcap screw (19M7946) and dowel pin (AH169196). 2-Wheel Drive Axles have a different wheelbolt pattern than is used on the 2-Speed, 4-Wheel Drive System. Therefore, new 4-Wheel DriveWheel Rims are required when converting to the 2-Speed, 4-Wheel Drive. Order 2-Speed,4-Wheel Drive Rims through Service Parts. See Parts Catalog for correct Tie Rod EndAssemblies. Order separately from PDC.

3,772.00




1,848.00


2,511.00





See Parts


See Parts


See Parts


707.00



872.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84496 Expanded Stone Trap Door with two-piece feed floor for improved rock

protection for 9660 STS, 9670 STS, 9760 STS, 9770STS, 9860 STSand 9870 STS Combines (PIN 720101 and ABOVE).May reduce capacity in tough green stemmed crops.

1,220.00


1,496.00


290.00


1,054.00


9,192.00


5,929.00




447.00


See Parts







1,359.00





SUGGESTEDLIST PRICE

USD ($)




825.00





11,661.00


1,507.00



200.00




2,202.00


672.00


1,474.00




5,617.00





SUGGESTEDLIST PRICE

USD ($)




5,617.00



743.00


471.00

BH84628 Enhanced Rice Performance BundleFor 9870 STS Rice Combine.Includes Tine Feed Accelerator (65 Tines), "Comb" feed section floor, Eighteen Threshing STSRotor Tines, Two Rotor Discharge Paddles.

5,303.00


2,962.00


4,204.00


4,512.00

BH90156 Feed Accelerator and Threshing Components for extreme tough, or green rice conditions 7,143.00


3,042.00


967.00


191.00


3,160.00

BH84582 Tine Feed Accelerator for extreme tough, or green rice conditions 3,645.00


854.00




AUGER:26 In. Diameter Cross Auger with

Full Width Steel Auger FingersAuger Floor Strippers: 625 and

630 Models are equipped withtwo Floor Strippers

Adjustable Rear StripperAuger Flight Extensions (2 Sets)Heavy Duty 26 In. Pitch Auger Flighting

CUTTERBAR:Fine Tooth Bolt-On Knife SectionsHeat-Treated and High Wear Extended Wear

Knife Guards4 In. Double-Cut Knife System with

Screw Adjustable Knife Hold-downsTrue Width Cutterbar

HEADER HEIGHT SENSING:Header Height Sensing with Contour-

Master Tilt Sensors for combinewith or without tilting feederhouse

REEL:Hydraulic Reel Lift with Extended

Height CylindersPoly Tine Pickup Reel with

8 In. Center Tube Diameter(Models 622R and 625R)

10 In. Center Tube Diameter(Model 630R)

Hydraulic Fore/Aft Reel PositionQuick-adjust Reel Finger Pitch AdjustmentReel Position (Fore/Aft and Height) ResumeDial-A-Speed Reel ControlReel Reverse feature with 70 Series CombinesReel End Shield

DRIVES:Single In-line Knife Gear Drive SystemSingle Left Hand Telescoping Header

Connecting DriveshaftHydrostatic Reel Drive MotorSingle-Point (Hydraulic and

Electrical) Hookup

MISCELLANEOUS:Perma-Glide Drive ShieldStainless Steel Feed PlatesPlatform Mounted Stubble LightsRoad Transport Warning LightsBottom Protection Plates (Regular Duty)


SUGGESTEDLIST PRICE

USD ($)



Field Conversions may be required on any 600 Series Platform that will be used on combinesprior to 70 Series.Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specificinformation and compatibility requirements.

945XH 622R - 22 Ft. Rigid Cutting Platform (Model Year 2011)For T670, 9570 STS, 9670 STS and 9770 STS and 9870 STS.Requires Code 9979 if Platform is to be used on 9560 STS or 9570 STS.

29,634.00

AUGER VERSION1310 Auger with Full Width Steel Fingers In Base Price

1325 Auger with Hard Faced Flighting and Full Width Steel FingersRecommended for Rice Harvesting.

1,466.00

1315 Auger with Full Width Composite FingersNot recommended for Rice Harvesting.Composite Fingers are a wear item. Wear life usually will range from one to two seasons. Insome crop conditions, wear life may be less and depends on crop type conditions and amountof acres harvested. Composite Fingers are not a warranty item.

69.00


622R - 22 Ft. Rigid Cutting Platform (Model Year 2011)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

REELS1005 Poly Tine Pickup Reel

8-Inch Center Tube Diameter Poly Tine Pickup Reel on a 22 Ft. and 25 Ft. Platform.In Base Price

TEMPORARY SURFACE RUST PROTECTION6700 Temporary Surface Rust/Corrosion Protection

Required for protection of platform from road salt corrosion during transport from factory inwinter months or export shipment overseas. Required for Export.

187.00

6705 Less Temporary Surface Rust/Corrosion ProtectionNot available for Export.

In Base Price

SPECIAL EQUIPMENT - FACTORY INSTALLEDField Conversions may be required on any Model 600R Rigid and 600F Flex Series Platformsthat will be used on combines prior to 70 Series.Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specificinformation and compatibility requirements.

7640 Spare Knife, One-Piece Fine Tooth 446.00

7647 Platform Less Automatic Header Height and Contour-Master Sensing -2,257.00


Miscellaneous:9979 Auger Flight and Rear Stripper Extensions required if Platform

is to be used with a 9560 STS or 9570 STS Combine142.00

Operator's Manuals:9812 Romanian Operator's Manual No Charge

9815 Hebrew Operator's Manual No Charge

9805 French Operator's Manual No Charge

9809 Russian Operator's Manual No Charge

9810 Spanish Operator's Manual No Charge

9819 Chinese Operator's Manual No Charge


Miscellaneous:BH84329 Auger Flight and Rear Stripper Extensions required if Platform



622R - 22 Ft. Rigid Cutting Platform (Model Year 2011)Continued


















Electrical) Hookup



SUGGESTEDLIST PRICE

USD ($)




947XH 625R - 25 Ft. Rigid Cutting Platform (Model Year 2011)For T670, 9570 STS, 9670 STS, 9770 STS and 9870 STS.Requires Code 9979 if Platform is to be used on 9560 STS or 9570 STS.

30,367.00



1,481.00


73.00





SUGGESTEDLIST PRICE

USD ($)


8-Inch Center Tube Diameter Poly Tine Pickup Reel on a 22 Ft. and 25 Ft. Platform.In Base Price

1006 Steel Tine Pickup Reel8-Inch Center Tube Diameter Steel Tine Pickup Reel on a 25 Ft. Platform.

1,262.00

1000 5 Slat Reel with Anti-Wrap End Shield (8 In. Center Tube Diameter) -2,246.00



187.00


In Base Price




7676 Heavy Duty Bottom Protection Plates (in lieu of Regular Duty Protection Plates) 458.00

7681 CropliftersAvailable on 25 Ft. and 30 Ft. machines.

782.00














SUGGESTEDLIST PRICE

USD ($)























Electrical) Hookup



SUGGESTEDLIST PRICE

USD ($)




949XH 630R - 30 Ft. Rigid Cutting Platform (Model Year 2011)For T670, 9570 STS, 9670 STS, 9770 STS and 9870 STS.Requires Code 9979 if Platform is to be used on 9560 STS or 9570 STS.

35,210.00



1,481.00


83.00





SUGGESTEDLIST PRICE

USD ($)


10-Inch Center Tube Diameter Poly Tine Pickup Reel on a 30 Ft. Platform.In Base Price

1006 Steel Tine Pickup Reel10-Inch Center Tube Diameter Steel Tine Pickup Reel on a 30 Ft. Platform.

1,262.00

1000 5 Slat Reel with Anti-Wrap End Shield (8 In. Center Tube Diameter) -2,246.00



187.00


In Base Price




7676 Heavy Duty Bottom Protection Plates (in lieu of Regular Duty Protection Plates) 601.00

7681 CropliftersAvailable on 25 Ft. and 30 Ft. machines.

876.00














SUGGESTEDLIST PRICE

USD ($)








Full Width Composite Auger FingersAuger Floor Strippers: 625, 630, and 635 FlexModels

are equipped with two floor strippersAdjustable Rear StripperAuger Flight Extensions (1 Set)Heavy Duty 26 In. Pitch Auger Flighting

CUTTERBAR:Bolt-On Coarse Tooth Knife SectionsHeat-Treated and Extended Wear Knife Guards4 In. Double-Cut Knife System with

Screw Adjustable Knife Hold-downsTrue Width Cutterbar6 In. HydraFlex Float System

HEADER HEIGHT SENSING:Header Height Sensing in Flex Mode

with Contour-Master Tilt Sensorsfor combine with or withouttilting feederhouse



8 In. Center Tube Diameter(Models 620F, 622F and 625F)

10 In. Center Tube Diameter

(Models 630F and 635F)Hydraulic Fore/Aft Reel PositionQuick-adjust Reel Finger Pitch AdjustmentReel Reverse feature with 70 Series CombinesReel Position (Fore/Aft and Height) ResumeDial-A-Speed Reel Control

DRIVES:Single In-line Knife Gear Drive System

620F, 622F, 625F, 630F and 635FSingle Left Hand Telescoping Header


Electrical) Hookup

MISCELLANEOUS:Perma-Glide Drive ShieldPerma-Glide Platform Divider PointsStainless Steel Feed Plates with

Short (23 mm) Stone DamsPlatform Mounted Stubble LightsRoad Transport Warning LightsPoly Skid Shoes


SUGGESTEDLIST PRICE

USD ($)




942NH 620F HydraFlex - 20 Ft. Flex Cutting Platform (Model Year 2011)For 9570 STS and 9670 STS.Requires Code 9979 if Platform is to be used on 9560 STS or 9570 STS.

30,692.00

AUGER VERSION1310 Auger with Full Width Steel Fingers -65.00


In Base Price

TEMPORARY SURFACE RUST PROTECTION


620F HydraFlex - 20 Ft. Flex Cutting Platform (Model Year 2011)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

TEMPORARY SURFACE RUST PROTECTION ...Continued...6700 Temporary Surface Rust/Corrosion Protection


187.00


In Base Price


7640 Spare Knife, One-Piece Coarse Tooth 410.00


7680 Less Reel, Mounting, and Drive PartsIncludes Dial-A-Speed sensors and fore/aft hydraulic cylinders. Reel resume parts notincluded.

-3,503.00

7685 High (57 mm) Stone DamRecommended in crop conditions where rocks and other field debris are present in the cuttingarea. May affect material flow into cutterbar in very heavy residue or extreme no-tillconditions.

203.00

7677 Raised Cut Height Skid ShoesIncludes skid shoes and end flex seals. Raised Cut Height Skid Shoe is available as a dealer orfactory-installed option on the 600 Series HydraFlex. The 'raised cut height' design of this skidshoe increases the cutterbar cutting height from 38 mm (1.5 In.) to 63 mm (2.5 In.). Providesadded protection in field conditions where excessive rocks and other field debris are present ortall, damp, high residue from double crop operations exists within the low height cutting rangeof the 600 Series Flexible cutterbar.

1,420.00




9982 Header Height Sensing in Rigid ModeGround contacting height sensors for automatic height sensing when cutterbar is locked inrigid mode. Includes sensors and harness. Requires additional combine software upgradethrough Service ADVISOR.

2,483.00





620F HydraFlex - 20 Ft. Flex Cutting Platform (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)





9806 Italian Operator's Manual No Charge




BH84622 Header Height Sensing in Rigid ModeGround contacting height sensors for automatic height sensing when cutterbar is locked inrigid mode. Includes sensors and harness. Requires additional combine software upgradethrough Service ADVISOR.

2,483.00



















Electrical) Hookup




SUGGESTEDLIST PRICE

USD ($)




944NH 622F HydraFlex - 22 Ft. Flex Cutting Platform (Model Year 2011)For T670, 9570 STS and 9670 STS.Requires Code 9979 if Platform is to be used on 9560 STS or 9570 STS.

32,276.00



In Base Price






SUGGESTEDLIST PRICE

USD ($)



187.00


In Base Price





-3,886.00


203.00


1,557.00





2,483.00








SUGGESTEDLIST PRICE

USD ($)










2,483.00



















Electrical) Hookup




SUGGESTEDLIST PRICE

USD ($)




946NH 625F HydraFlex - 25 Ft. Flex Cutting Platform (Model Year 2011)For T670, 9570 STS, 9670 STS, 9770 STS and 9870 STS.Requires Code 9979 if Platform is to be used on 9560 STS or 9570 STS.

33,322.00



In Base Price






SUGGESTEDLIST PRICE

USD ($)



187.00


In Base Price




7644 Spare Knife, One-Piece with Long/Short Coarse Tooth Knife SectionsAvailable on 625F, 630F and 635F only.

494.00


-4,047.00


1,748.00


203.00

7720 Long/Short Coarse SectionsAvailable on 625F, 630F and 635F only. Recommended for tough no-till conditions wherelarge standing cornstalks are present in the cutting area. This code replaces installed knifewith knife equipped with long/short sections.

No Charge





2,483.00





SUGGESTEDLIST PRICE

USD ($)













2,483.00



















Electrical) Hookup




SUGGESTEDLIST PRICE

USD ($)




948NH 630F HydraFlex - 30 Ft. Flex Cutting Platform (Model Year 2011)For T670, 9570 STS, 9670 STS, 9770 STS and 9870 STS.Requires Code 9979 if Platform is to be used on 9560 STS or 9570 STS.

39,059.00



In Base Price






SUGGESTEDLIST PRICE

USD ($)



187.00


In Base Price





595.00


-4,807.00


203.00


2,078.00


No Charge





2,483.00





SUGGESTEDLIST PRICE

USD ($)













2,483.00



















Electrical) Hookup




SUGGESTEDLIST PRICE

USD ($)




950NH 635F HydraFlex - 35 Ft. Flex Cutting Platform (Model Year 2011)For 9670 STS, 9770 STS and 9870 STS.Requires 22.5 Ft. Unloading Auger on combine.Recommended for use on combines equipped with Contour-Master Feederhouse.

44,479.00



In Base Price





SUGGESTEDLIST PRICE

USD ($)



187.00


In Base Price





695.00


-5,648.00


203.00


2,408.00


No Charge


Miscellaneous:9982 Header Height Sensing in Rigid Mode

Ground contacting height sensors for automatic height sensing when cutterbar is locked inrigid mode. Includes sensors and harness. Requires additional combine software upgradethrough Service ADVISOR.

2,483.00






SUGGESTEDLIST PRICE

USD ($)









Miscellaneous:BH84622 Header Height Sensing in Rigid Mode

Ground contacting height sensors for automatic height sensing when cutterbar is locked inrigid mode. Includes sensors and harness. Requires additional combine software upgradethrough Service ADVISOR.

2,483.00




CUTTERBAR:Fine Tooth Double-Cut Knife System with

Screw Adjustable Knife Hold-downsRegular Long Point Knife Guards

HEIGHT CONTROL AND FEEDING:Hydrafloat Automatic Suspension and Position

Control System - CombineSingle Gauge Wheels 630D, 635D and 640D16" Feed Drum with

Pattern Steel Auger FingersHydraulic Top Link Tilt Adjustment

from Operator Station when ordered with Codes0700 and 0705

QuickTach Top Link for Windrower Applications whenordered

with Code 0705Stainless Steel Feed Floor - Combine

REEL:One-Piece, Poly Tine Pickup Reel with

8 In. Tube (Model 625D)One-Piece, Poly Tine Pickup Reel with

10 In. Tube (Models 630D and 635D)Two-Piece, Poly Tine Pickup Reel with

6 In. Tube (Model 640D)Hydraulic Fore/Aft Reel ControlDial-A-Speed Reel Control - Combine and WindrowerReel Position (Fore/Aft and Height) ResumeQuick Adjust Reel Finger PitchReel and Center Drum Reverse when used with 70Series STS Combines

and T670 Series Combines and newer

DRIVES:Integrated (On-board) Platform Hydraulic

System for Reel and Draper Belt DriveTelescoping Header Connecting DriveshaftStraight-Line Single Knife Drive Shaft DrivenSystem (Model 625D)

Combine only application with order Code 0700Straight-Line Dual Knife Drive Shaft Driven System

(Models 625D, 630D, 635D and 640D) WindrowerApplication with order Codes 0705 and 0710(Models 630D, 635D and 640D) Combine Applicationwith order Code 0700

Hydraulic Reel Drive MotorHeavy Duty Feed Drum Drive and

Slip Clutch with Drum and Center Draper Reversewith Combine Feederhouse

40" Wide Side Draper Belts with Speed SensorRubberized Side Belt Drive RollersSingle-Point (Hydraulic and

Electrical Hookup)

MISCELLANEOUS:Heavy Duty Centered Main FrameCenter Belt Bottom Cleanout Door for Combine

Center Feed ApplicationsManual Deck ShiftPerma-Glide Platform End ShieldsPerma-Glide Platform End Dividers with

Vertical Crop Divider RodsRoad Transport Warning LightsStubble Lights


SUGGESTEDLIST PRICE

USD ($)


BASE MACHINEEX-WORKS East Moline, Illinois600D Series Draper Cutting Platforms for Combines and Windrowers

Field Conversions required on any Model 600 Series Draper Platform that will be used oncombines prior to 70 Series.Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specificinformation and compatibility requirements. Contour-Master Feederhouserecommended to maximize performance of 630D, 635D and 640D Draper Platforms whenoperating in rolling terrain.

640CH 625D - 25 Ft. Centered Draper Cutting Platform (Model Year 2011)For T670, 9570 STS, 9670 STS, 9770 STS, 9870 STS and D450 Windrower.

54,081.00

PRODUCT APPLICATION0700 Draper for use on Combine only

Includes Manual Deck Shift. 625D has a Single Knife Drive, 630D, 635D and 640D have DualKnife Drive. See Attachments Factory Installed for further ordering information.

In Base Price

0705 Draper for use on Combine and D450 Series Windrower 1,736.00


625D - 25 Ft. Centered Draper Cutting Platform (Model Year 2011)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

PRODUCT APPLICATION ...Continued...Includes Dual Knife Drive, Combine Attachment Frame/Center Feed System, QuickTach TopLink, Center Tilt Cylinder Bracket, Quick-Attach Frame, Parking Stands, and Walk Platformsfor conversion on a D450 Windrower. Requires Code 0905. Option Code 7655, Slow SpeedRoad Transport System with Warning Lights, is recommended. Not available in Spain andItaly.

0710 Draper for use on D450 Windrower Only - LESS Combine Adapter Frame/CenterIncludes Dual Knife Drive, Center Tilt Cylinder Bracket, QuickTach Top Link, Parking Stands,and Walk Platform. Requires Code 0905. Option Code 7655, Slow Speed Road TransportSystem with Warning Lights, is recommended. Not available in Spain and Italy.

-11,295.00

KNIFE DRIVE0900 Less Dual Knife Drive

Available with Code 0700 only. Not available with Codes 0705 and 0710. Not available inSpain and Italy.

In Base Price

0905 Dual Knife DriveAvailable with Code 0700 for rice and tough cutting conditions. Required with Codes 0705and 0710.

4,930.00



187.00


In Base Price


8 In. Center Tube Diameter Poly Tine Pickup Reel on 25 Ft. Platform. Not available in Spainand Italy.

In Base Price

1006 Steel Tine Extra Large 54 In. Diameter Pickup Reel (8 inch center tube diameter) 625D onlyFor tough feeding crops such as rice.

1,262.00

SPECIAL EQUIPMENT - FACTORY INSTALLED7640 Spare Knife, One-Piece with Knife Head Fine Cut

Available for 625 and 630D when ordered with Single Knife Drive. Not available in Spain andItaly.

776.00

7644 LH and RH One-Piece Spare Knife with Knife Head for Dual Knife Drive Fine CutAvailable with 625D and 630D with Knife Head for Dual Knife Drive.Only Spare Knife option available for 635D and 640D.

916.00

7678 Cutterbar Full Width Poly Skid ShoesRequired in Spain and Italy.

1,423.00



625D - 25 Ft. Centered Draper Cutting Platform (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)


600D Series Draper Platforms:Field Conversions required on any Model 600D Series Draper Platform that will be used oncombines prior to 70 Series.Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specificinformation and compatibility requirements.

9690 Top Crop Conveying AugerRecommended for operation in bushy or high volume harvesting conditions.

5,217.00

9978 Feed Drum DeflectorsFor use with 9560 STS and 9570 STS Combines.

230.00

9670 Feed Drum Anti-Wrap BundleRecommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Onlycompatible with Codes 0700 and 0705. Required in Spain and Italy for rice.

131.00

9660 Reel Flip Over BundleRecommended for 625D, 630D, and 635D to reduce reel wrapping. Not compatible Code1006. Not available in Spain and Italy.

2,540.00

Operator's Manuals:9809 Russian Operator's Manual No Charge


9804 Portuguese Operator's Manual No Charge



600D Series Draper Platforms:BXE10057 Feed Drum Anti-Wrap Bundle

Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Onlycompatible with Codes 0700 and 0705. Required in Spain and Italy for rice.

131.00

BH84589 Feed Drum DeflectorsFor use with 9560 STS and 9570 STS Combines.

230.00

BXE10037 Reel Flip Over BundleRecommended for 625D, 630D, and 635D to reduce reel wrapping. Not compatible Code1006. Not available in Spain and Italy.

2,540.00

BXE10059 Top Crop Conveying AugerRecommended for operation in bushy or high volume harvesting conditions.

5,217.00
























Electrical Hookup)





SUGGESTEDLIST PRICE

USD ($)




641CH 630D - 30 Ft. Centered Draper Cutting Platform (Model Year 2011)For T670, 9670 STS, 9770 STS, 9870 STS and D450 Windrower.Contour Master is recommended to maximize performance of 600D Draper Platforms.

62,186.00



In Base Price





SUGGESTEDLIST PRICE

USD ($)

PRODUCT APPLICATION ...Continued...0705 Draper for use on Combine and D450 Series Windrower

Includes Dual Knife Drive, Combine Attachment Frame/Center Feed System, QuickTach TopLink, Center Tilt Cylinder Bracket, Quick-Attach Frame, Parking Stands, and Walk Platformsfor conversion on a D450 Windrower. Requires Code 0905. Option Code 7655, Slow SpeedRoad Transport System with Warning Lights, is recommended. Not available in Spain andItaly.

1,736.00


-11,295.00

KNIFE DRIVE0900 Less Dual Knife Drive

Available with Code 0700 only. Not available with Codes 0705 and 0710. Not available inSpain and Italy.

-4,930.00

0905 Dual Knife DriveAvailable with Code 0700 for rice and tough cutting conditions. Required with Codes 0705and 0710.

In Base Price



187.00


In Base Price


10 In. Center Tube Diameter Poly Tine Pickup Reel on 30 Ft. and a 35 Ft. Platform. Notavailable in Spain and Italy.

In Base Price

1006 Steel Tine 42 In. Diameter Pickup Reel (10 inch center tube diameter) 630D onlyFor tough feeding crops such as rice.

1,391.00

SPECIAL EQUIPMENT - FACTORY INSTALLED7640 Spare Knife, One-Piece with Knife Head Fine Cut

Available for 625 and 630D when ordered with Single Knife Drive. Not available in Spain andItaly.

776.00

7644 LH and RH One-Piece Spare Knife with Knife Head for Dual Knife Drive Fine CutAvailable with 625D and 630D with Knife Head for Dual Knife Drive.Only Spare Knife option available for 635D and 640D.

1,002.00

7655 Slow Speed Road Transport System with Warning LightsThis option includes dual gauge wheels. Recommended with Codes 0705 and 0710. Notavailable in Spain and Italy.

4,876.00


1,621.00





SUGGESTEDLIST PRICE

USD ($)





5,217.00

9978 Feed Drum DeflectorsFor use with 9560 STS and 9570 STS Combines.

230.00


131.00


2,540.00








131.00


230.00


2,540.00


5,217.00
























Electrical Hookup)





SUGGESTEDLIST PRICE

USD ($)




642CH 635D - 35 Ft. Centered Draper Cutting Platform (Model Year 2011)For T670, 9670 STS, 9770 STS, 9870 STS and D450 Windrower.Contour Master is recommended to maximize performance of 600D Draper Platforms.Recommend 80mm Feederhouse lift cylinders for 635D and 640D Draper Platforms.

68,265.00



In Base Price





SUGGESTEDLIST PRICE

USD ($)

PRODUCT APPLICATION ...Continued...

0705 Draper for use on Combine and D450 Series WindrowerIncludes Dual Knife Drive, Combine Attachment Frame/Center Feed System, QuickTach TopLink, Center Tilt Cylinder Bracket, Quick-Attach Frame, Parking Stands, and Walk Platformsfor conversion on a D450 Windrower. Requires Code 0905. Option Code 7655, Slow SpeedRoad Transport System with Warning Lights, is recommended. Not available in Spain andItaly.

1,736.00


-11,295.00



187.00


In Base Price


10 In. Center Tube Diameter Poly Tine Pickup Reel on 30 Ft. and a 35 Ft. Platform. Notavailable in Spain and Italy.

In Base Price

SPECIAL EQUIPMENT - FACTORY INSTALLED7644 LH and RH One-Piece Spare Knife with Knife Head for Dual Knife Drive Fine Cut

Available with 625D and 630D with Knife Head for Dual Knife Drive.Only Spare Knife option available for 635D and 640D.

1,090.00


4,876.00


1,881.00




5,613.00





SUGGESTEDLIST PRICE

USD ($)



131.00


2,540.00








131.00


2,540.00


5,613.00
























Electrical Hookup)





SUGGESTEDLIST PRICE

USD ($)




643CH 640D - 40 Ft. Centered Draper Cutting Platform (Model Year 2011)For 9670 STS, 9770 STS, 9870 STS and D450 Windrower.Contour Master is recommended to maximize performance of 600D Draper Platforms.Recommend 80mm Feederhouse lift cylinders for 635D and 640D Draper Platforms.Recommend 26' Grain Tank Unloading Auger.

74,278.00


Includes Manual Deck Shift. 625D has a Single Knife Drive, 630D, 635D and 640D have DualIn Base Price





SUGGESTEDLIST PRICE

USD ($)

PRODUCT APPLICATION ...Continued...Knife Drive. See Attachments Factory Installed for further ordering information.

0705 Draper for use on Combine and D450 Series WindrowerIncludes Dual Knife Drive, Combine Attachment Frame/Center Feed System, QuickTach TopLink, Center Tilt Cylinder Bracket, Quick-Attach Frame, Parking Stands, and Walk Platformsfor conversion on a D450 Windrower. Requires Code 0905. Option Code 7655, Slow SpeedRoad Transport System with Warning Lights, is recommended. Not available in Spain andItaly.

1,736.00


-11,295.00



187.00


In Base Price


Poly Tine Pickup Reel - two-piece with Center Reel Arm (6 inch center tube diameter). Notavailable in Spain and Italy.

In Base Price

SPECIAL EQUIPMENT - FACTORY INSTALLED7644 LH and RH One-Piece Spare Knife with Knife Head for Dual Knife Drive Fine Cut

Available with 625D and 630D with Knife Head for Dual Knife Drive.Only Spare Knife option available for 635D and 640D.

1,188.00


4,876.00


2,207.00




5,613.00





SUGGESTEDLIST PRICE

USD ($)



131.00








131.00


5,613.00




PICKUP:15 Ft. Pickup Platform600 Series rigid platform frameDual Belt Pickup UnitFixed Position Pickup UnitFixed Gauge Wheels26 In. Diameter Floating Cross Auger

with 20 In. Pitch FlightSteel Auger FingersFieldGlide Active Pickup Suspension SystemPlastic Pickup Fingers44 In. Pickup BeltsHydraulic Adjustable WindscreenOptimum BPU to Feederhouse Floor GeometryFloor StrippersAdjustable Rear StrippersRear Stripper Extensions

DRIVES:Left Hand Mechanical Auger Drive with

Integral Slip ClutchLeft Hand Telescoping Header Connecting

Shaft (for use with narrow and wide-bodycombines, including Sidehill combines)

Single-Point (Electrical andHydraulic Hookup)

Left Hand Hydraulic Pickup Belt Drive

MISCELLANEOUS:20-10.00 6PR Gauge Wheels & TiresPerma-Glide Platform End ShieldsRoad Transport Warning LightsDial-A-Speed (automatic belt speed adjust)

Standard Header Height Sensing


SUGGESTEDLIST PRICE

USD ($)



Field Conversions may be required on any Model 615 Series Belt Pickup Platform that will beused on combines prior to 70 Series.Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specificinformation and compatibility requirements.

951VH 615P - 15 Ft. Belt Pickup Platform with 179 In. Belt Pickup (Model Year 2011)For T670, 9570 STS, 9670 STS, 9770 STS, and 9870 STS.

25,946.00

AUGER VERSION1300 Auger with Steel Fingers In Base Price

1305 Auger with Composite FingersComposite Fingers are a wear item. Wear life will usually range from one to two seasons.However, in some situations, wear life may be less and will depend on crop type conditionsand amount of acreage harvested. The Composite Fingers are not a warranty item.

67.00



187.00

6705 Less Temporary Surface Rust/Corrosion Protection. Not available for Export. In Base Price

SPECIAL EQUIPMENT - FACTORY INSTALLEDField Conversions may be required on any Model 615 Series Belt Pickup Platform that will be


615P - 15 Ft. Belt Pickup Platform with 179 In. Belt Pickup (Model Year 2011)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...used on combines prior to 70 Series. Refer to the Product Compatibility Tool and/orAgricultural Sales Manual for specific information and compatibility requirements.

7300 Telescoping Drive Shaft (for Export only)Required for use on HillMaster Combines.

61.00


Operator's Manuals:9805 French Operator's Manual No Charge

9807 Danish Operator's Manual No Charge

9808 German Operator's Manual No Charge





615P - 15 Ft. Belt Pickup Platform with 179 In. Belt Pickup (Model Year 2011)Continued


AUGER:18 In. Diameter Auger26 In. Auger Flighting Pitch with

Reverse Center FlightingDual Auger Strippers

(1 adjustable and 1 fixed)Auger speed 127 RPM

ROW UNITS:One-Piece Straight Knife Stalk RollsLarge Profile, Heavy-Duty Gathering ChainsTrash KnivesFull Profile Hard-faced Deck Plates

with Hydraulic AdjustmentEasy-Adjust (no tools) and Easy-Fold

Perma-Glide Deck Covers and End FendersReplaceable Wear Strips on Front

Gathering PointsHeader Height Sensing/Contour-MasterIntegral Adjustable (no tools) End

Fender Extensions

DRIVES:Gearcase Driven Row Units with Slip Clutch

Oil Bath Row Unit Drive with 80 HD Drive Chainand 1-1/4 In. Driveshaft for Corn Heads withoutStalkMaster

Oil Bath Row Unit Drive with 100 HD Drive Chainand 1-1/2 In. Driveshaft for StalkMasterCorn Heads

Single LH Telescoping Header Driveshaft(6-Row)

Double Telescoping Header Driveshaft(8-Row and 12-Row)

MISCELLANEOUS:Road Transport Warning LightsAdjustable Mounted Stubble LightsEasy Cleanout - Auger Floor Cleanout Doors,

Scalloped Self-Cleaning Row Unit LegsLow Maintenance - Yearly or 200 Hour

Service Interval


SUGGESTEDLIST PRICE

USD ($)



Field Conversions may be required on any Model 600C Corn Head that will be used oncombines prior to 70 Series.Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specificinformation and compatibility requirements.

635GH 606C 6-Row Corn Head (Model Year 2011)Can be used on 9570 STS and 9670 STS.A Variable Speed Feederhouse Drive is recommended for Corn Heads.

48,266.00

ROW SPACINGNote: See specific base codes for possible row spacing and combine requirements.

1030 30 In. Row Spacing In Base Price

1036 36 In. Row Spacing Same Price


1070 70 cm Row Spacing Same Price



Required for protection of platform from road salt corrosion during transport from Factory in159.00


606C 6-Row Corn Head (Model Year 2011)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

TEMPORARY SURFACE RUST PROTECTION ...Continued...winter months or export shipment overseas. Required for Export.


In Base Price

SPECIAL EQUIPMENT - FACTORY INSTALLEDRow Sense See AMS Price Pages.For 70 Series Combines equipped with integrated AutoTrac, SF1, SF2, or RTK Signal isrequired. Not available with 36 inch or 38 inch row spacing Code 1036 or 1038. Notavailable with Code 7647.Field Conversions may be required on any Model 600C Corn Head Platform that will be usedon combines prior to 70 Series. Refer to the Compatibility Tool and/or Agricultural SalesManual for specific information and compatibility requirements.

7645 Less Telescoping Header Connecting Driveshafts -714.00

7647 Corn Head less Header Height Sensing/Contour-Master Tilt Sensors(corn head parts only)Not available with StalkMaster Chopping Corn Heads.

-1,043.00

7690 Straight Fluted Stalk RollsNot available with StalkMaster Chopping Corn Heads.

-1,523.00


90 Series Corn Heads and 600C Series Corn Heads:9979 Corn Head Stripper Extension - For use on 9560 STS and 9570 STS Combines Only

The Stripper Extension is required for use on 9560 STS and 9570 STS Combines. Providesadditional length to the 600C Series Corn Head Back Stripper Bar, to allow the Stripper Barto effectively feed ears of corn to the Feederhouse opening and help eliminate ear tossing bythe Corn Head Cross Auger.

150.00






9840 Hungarian Operator's Manual No Charge

9845 Czech Operator's Manual No Charge

9825 Arabic Operator's Manual No Charge



606C 6-Row Corn Head (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)


9847 Polish Operator's Manual No Charge



90 Series Corn Heads and 600C Series Corn Heads:BH84542 Corn Head Stripper Extension - For use on 9560 STS and 9570 STS Combines Only


150.00











Fender Extensions








Service Interval


SUGGESTEDLIST PRICE

USD ($)




635HH 606C StalkMaster 6-Row Chopping Corn Head (Model Year 2011)6-Row Chopping only for use on: 9570 STS, 9670 STS and 9770 STS with the Heavy-Duty orHigh-Torque Posi-Torque Feederhouse Drive or the High-Torque Fixed Speed Drive.Not available in 36 In. or 38 In. Row Spacing.Combines should be equipped with tires which straddle the corn rows to avoid tire damage.

68,543.00






Required for protection of platform from road salt corrosion during transport from Factory inwinter months or export shipment overseas. Required for Export.

159.00


606C StalkMaster 6-Row Chopping Corn Head (Model Year 2011)Equipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

TEMPORARY SURFACE RUST PROTECTION ...Continued...6705 Less Temporary Surface Rust/Corrosion Protection

Not available for Export.In Base Price


7645 Less Telescoping Header Connecting Driveshafts -714.00




150.00














606C StalkMaster 6-Row Chopping Corn Head (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)




150.00











Fender Extensions








Service Interval


SUGGESTEDLIST PRICE

USD ($)




636GH 608C 8-Row Corn Head (Model Year 2011)Can be used on 9570 STS, 9670 STS, 9770 STS and 9870 STS.A Variable Speed Feederhouse Drive is recommended for Corn Heads.

62,114.00








Required for protection of platform from road salt corrosion during transport from Factory in159.00





SUGGESTEDLIST PRICE

USD ($)

TEMPORARY SURFACE RUST PROTECTION ...Continued...winter months or export shipment overseas. Required for Export.


In Base Price


7645 Less Telescoping Header Connecting Driveshafts -1,266.00


-1,516.00


-2,031.00




150.00














SUGGESTEDLIST PRICE

USD ($)







150.00











Fender Extensions








Service Interval


SUGGESTEDLIST PRICE

USD ($)




636HH 608C StalkMaster 8-Row Chopping Corn Head (Model Year 2011)8-Row Chopping only for use on: 9670 STS, 9770 STS and 9870 STS with either theCommandTouch Multi-Speed Drive, the High-Torque Posi-Torque or the High-Torque FixedSpeed Drive.Not available in 36 In. or 38 In. Row Spacing.Combines should be equipped with tires which straddle the corn rows to avoid tire damage.

85,054.00







159.00





SUGGESTEDLIST PRICE

USD ($)



























Fender Extensions








Service Interval


SUGGESTEDLIST PRICE

USD ($)




637GH 612C 12-Row Corn Head (Model Year 2011)Can be used on 9670 STS, 9770 STS and 9870 STS.A Variable Speed Feederhouse Drive is recommended for Corn Heads.30 In. Row Spacing requires High Torque, Variable Speed, CommandTouch.Multi-Speed and High Torque Fixed Speed Feederhouse Drive.

96,415.00







159.00





SUGGESTEDLIST PRICE

USD ($)






-1,516.00


-3,047.00























Fender Extensions








Service Interval


SUGGESTEDLIST PRICE

USD ($)




637HH 612C StalkMaster 12-Row Chopping Corn Head (Model Year 2011)20 In. and 22 In. Row Spacing only for use on: 9770 STS and 9870 STS and requires either theCommandTouch Multi-Speed Drive, the High-Torque Posi-Torq Variable Speed Drive, or theHigh-Torque Fixed Speed Drive.30 In. Row Spacing only for use on: 9770 STS and 9870 STS equipped with theCommandTouch Multi-Speed Drive and Code 1730.Combines should be equipped with tires which straddle the corn rows to avoid tire damage.Intelligent Power Management option is recommended to maximize performance when usedwith a 9870STS.80mm Feederhouse Lift Cylinders are recommended.

124,173.00










SUGGESTEDLIST PRICE

USD ($)

ROW SPACING ...Continued...1075 75 cm Row Spacing Same Price



159.00


In Base Price



















SUGGESTEDLIST PRICE

USD ($)


600 Series Corn Heads:BH84584 Chopping Row Unit for 600 Series Corn Heads

Does not include Stalk Rolls.6,152.00

BH84583 Row Unit for 600 Series Corn HeadsDoes not include Stalk Rolls.

3,793.00

600 Series Flex Platforms and 600 Series Rigid Platforms:BH84473 3rd Floor Stripper for 625R and 625F

For enhanced feeding in small grain crops. Standard equipment on 625RPlatforms S/N 710801 and Up, and 630R Platforms S/N 711046 and Up.

117.00

BH84470 3rd Floor Stripper for 630R, 630F and 635FFor enhanced feeding in small grain crops. Standard equipment on 625RPlatforms S/N 710801 and Up, and 630R Platforms S/N 711046 and Up.

139.00

BH84425 Adjustable Reel Drive Relief Valve for 600 Series Rigid and FlexCutting Platforms

348.00

AH205018 Center Feed Auger FlightingRecommended for viney crop conditions.

See Parts

BH84265 Reel Position (Fore/Aft and Height) Resume for use on all 600 SeriesPlatforms

375.00

600 Series Flex Platforms:BH84278 Contour-Master Sensors

For use on 600 Series Flex Platforms.292.00

BH84462 Header Height Sensing in Rigid ModeIncludes sensors and harness. Requires additional software upgrade through ServiceADVISOR.

2,483.00

BH84326 Raised Cut Height Skid Shoes, Flex Platforms 22 Ft., 25 Ft.Raises Platform cutting height from 1.5 inches (38 mm) to 2.5 inches (63 mm). Includes: SkidShoes and End Flex Seals. Recommended for rocky or adverse fields or when high fieldresidue exits in double crop conditions.

2,503.00

BH84327 Raised Cut Height Skid Shoes, Flex Platforms 30 Ft.Raises Platform cutting height from 1.5 inches (38 mm) to 2.5 inches (63 mm). Includes: SkidShoes and End Flex Seals. Recommended for rocky or adverse fields or when high fieldresidue exits in double crop conditions.

2,915.00

BH84403 Stone Dams Short (23 mm) for 615F, 618F and 620FRecommended for use in all crop conditions where rocks or other field debris are not presentin cutting area.

255.00

BH84404 Stone Dams Short (23 mm) for 622F and 625FRecommended for use in all crop conditions where rocks or other field debris are not presentin cutting area.

309.00


Miscellaneous Platform and Corn Head Attachments (Model Year 2011)



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84405 Stone Dams Short (23 mm) for 630F

Recommended for use in all crop conditions where rocks or other field debris are not presentin cutting area.

362.00

BH84406 Stone Dams Short (23 mm) for 635FRecommended for use in all crop conditions where rocks or other field debris are not presentin cutting area.

416.00

600 Series Rigid Platforms:BH84277 Header Height Sensing and Contour-Master Sensors for use with

600 Series Ridge Platforms on all 50 Series and 60 Series Combines.Provides Contour Master Sensing only on 9000 Series and 10 SeriesCombines.

2,459.00


BXE10057 Feed Drum Anti-Wrap BundleRecommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Onlycompatible with Codes 0700 and 0705. Required in Spain and Italy for rice.

131.00


230.00


2,540.00

BXE10127 Slope-Float CompensationFor use with Model Year 2009 Draper with Slow Speed Transport System. For use on ModelYear 2009 - 630D and 635D Draper Platforms. Requires Code AXE12064 HydraulicAccumulator to be ordered separately. Recommended for use with Non Contour MasterFeederhouse combines when operating in sustained side slopes.

1,740.00

BXE10126 Slope-Float CompensationFor use without Slow Speed Transport System. For use on 630D, 635D, and 640D DraperPlatforms. Requires Code AXE12064 Hydraulic Accumulator to be ordered separately.Recommended for use with Non Contour Master Feederhouse combines when operating insustained side slopes.

2,317.00

BXE10128 Slope-Float CompensationFor use with Model Year 2010 and later Drapers with Slow Speed Transport System. For useon 630D, 635D, and 640D Draper Platforms. Requires Code AXE12064 HydraulicAccumulator to be ordered separately.Recommended for use with Non Contour Master Feederhouse combines when operating insustained side slopes.

1,164.00

BH84585 Top Crop Conveying AugerFor use on 625D and 630D Draper Platforms.Recommended for operation in bushy or high volume harvesting conditions.

3,792.00

BH84586 Top Crop Conveying AugerFor use on 635D and 640D Draper Platforms.Recommended for operation in bushy or high volume harvesting conditions.

4,170.00


Miscellaneous Platform and Corn Head Attachments (Model Year 2011)Continued



SUGGESTEDLIST PRICE

USD ($)


90 Series Corn Heads:BH79944 Center Auger Cover 642.00

BH80778 Deck Plates (Remote Hydraulic Adjustment) for 1293 Corn HeadRequires Code AH161692 if Header is not equipped with Header Height Sensing.

5,481.00

BH80772 Deck Plates (Remote Hydraulic Adjustment) for 893 Corn HeadRequires Code AH161691 if Header is not equipped with Header Height Sensing.

3,704.00

BH84313 Gathering Chain Paddles (for 2 Rows) for use on all 90 Series Corn HeadsOrder (2) bundles for 1293 Corn Head.

85.00

BH81647 Hydraulic Deck Plate Indicator ConversionFor Corn heads prior to 1998 (up to PIN 675051).Contains indicator, indicator housing and cable.

198.00

BH81180 Outer Gatherer Sheet Extensions for all 90 Series Corn HeadsRequires JDG1295 Repair Kit. See Agricultural Sales Manual for specific orderinginformation.

348.00

BH84476 Row Units Less PERMA-GLIDE Shield and PointsIncludes 2 Row Units less Stalk Rolls.

6,604.00

Miscellaneous Attachments:BH84041 6 Steel Auxiliary Fingers (and attaching hardware) for 25 Ft., 30 Ft. and 36 Ft.

900 Series Draper and 600 Series Platforms. 3 Steel Auxiliary Fingersused on 15 Ft. through 22 Ft.Helps Reduce Material Build-up Between Reel and Crop Divider.

168.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSIONThe following field conversion attachments are available to allow a 60 Series Combine to becompatible with all Headers from PIN 685151-PIN 704000 and any 600 Series Platform to becompatible with any 9000, 10 Series or 50 Series Combine.

Compatibility attachments are grouped by the product to which the bundle must be attached.

10 Series Combines and 50 Series Combines:BH84212 Conversion to Feederhouse Hooks for Contour-Master Feederhouse

600 Series Platforms, 90 Series Corn Heads (PIN 715000 and Up) and 615 Belt Pickuprequire Feederhouse Hooks to attach to the Combine for 50 Series, 10 Series and 9000 SeriesCombines.

2,105.00

BH84214 Conversion to Feederhouse Hooks, includes Bubble, for Level Land Feederhouse600 Series Platforms, 90 Series Corn Heads (PIN 715000 and Up) and 615 Belt Pickuprequire Feederhouse Hooks to attach to the Combine for 50 Series, 10 Series and 9000 SeriesCombines.

648.00

10 Series Combines:BH84096 Cab Header Height Controls and Display Conversion, for converting

10 Series Combines equipped with Dial-A-Matic to be compatiblewith 600 Series HydraFlex Platforms. Includes In-Cab PressureGauge for viewing HydraFlex Pressure, Wiring Harness,and Console Switch

504.00

50 Series Combines:BH78623 75 Percent Beater Speed Conversion

For 9450, 9550, SideHill 9550, 9650, 9660 and 9660 WTS Combines.326.00

BH84094 Cab Header Height Sensing Controls Display ConversionConverts 50 Series Combines In-Cab Controls and Display for use with a 600 SeriesHydraFlex Platform. Includes Software and CornerPost Display for HydraFlex Control andOperation, and Reel/Deck Plate Resume. 50 Series Combines Up to PIN 694000 requireAH217993 Circuit Board.

227.00

BH84213 Conversion of 50 Series, 10 Series, and 9000 Series narrow body(ex. 9400, 9500, 9410, 9510, 9450, 9550, CTS, 9560 CWS and STSCombines) with Contour-MasterBH84213 contains Filler Plates for the narrow body feederhouses.

295.00

BH84208 Multi-Connection (Hydraulic/Electrical) Point Conversion toSingle-Point (Hydraulic/Electrical) Coupler for 50 Series WalkerCombine Up to PIN 695101 and Up (with Hydraulic Hose Lines)

1,288.00

BH84209 Multi-Connection (Hydraulic/Electrical) Point Conversion toSingle-Point (Hydraulic/Electrical) Coupler for 50 Series WalkerCombine Up to PIN 694000 (with Steel Hydraulic Lines)

1,290.00


Attachments for Combine and Header Platforms - Allows Compatibility to EquipmentPrior to the current year



SUGGESTEDLIST PRICE

USD ($)


600 Series Draper:BH84587 Combine Conversion Bundle for 50 Series and 60 Series Combines

Includes parts and combine software to provide compatibility for 600D Series DraperPlatforms with 50 Series and 60 Series Combines (PIN 695000 and Up).

1,240.00

600 Series Flex Platforms and 600 Series Rigid Platforms:BH84425 Adjustable Reel Drive Relief Valve for 600 Series Rigid and Flex

Cutting Platforms348.00

BH84201 Driveshaft Conversion for 600 Series Platform used on9000 and 10 Series Level Land CombinesIncludes Telescoping Driveshaft and Spline-to-Sprocket Adapter and Shields.

996.00

BH84398 Platform Wedge Kit for all 600 Series Platforms used on 9000,10 Series and 50 Series CombinesProvides proper cutterbar angle to match combine tire height. Wedge Kit includes threedifferent angle combinations.

1,174.00

BH84206 Single-Point (Hydraulic/Electrical) Hookup Conversion to aMulti-Point Hydraulic Hookup (allows 600 Series Platform tohydraulically connect to a 9000, 10 or 50 Series Combineequipped with Multi-Point Hydraulic Connections)

723.00

600 Series Flex Platforms:BH84098 Dial-A-Matic Electrical Conversion

Includes Dial-A-Matic Sensor and Harness to allow compatibility with a Combine equippedwith Dial-A-Matic. Also requires BH84096. See Attachment for Field Conversion forNon-Current 9000 Series Combines, Cab Accessories.

303.00

600 Series Rigid Platforms:BH84095 Electrical Harness Adapter Converts 600 Series Rigid and Flex Platforms'

electrical system for use on 9000 and 10 Series CombinesIncludes harness and attaching parts.

389.00

90 Series Corn Heads and 50 Series Row Crops:BH84109 Conversion to Single-Point Multi-Coupler (for use on

all 90 Series Corn Heads Up to PIN 704000 without HydraulicAdjustable Deck Plates)Provides Single-Point Multi-Coupler (Electrical only) for Hookup to a 60 or 70 SeriesCombine. For Corn Heads prior to PIN 685201 and not converted for use on 50 SeriesCombines, additional conversion is required. See Agricultural Sales Manual for conversion touse on 50 Series.

594.00

90 Series Corn Heads and 600C Series Corn Heads:BH81641 Combine Adapter Harness, 16-Pin to 31-Pin

Required for use of 90 Series Corn Head (up to PIN 685000) on 50 Series Combines.155.00

BH81651 Combine Adapter Harness, 31-Pin to 16-PinRequired for use of 90 Series Corn Head (PIN 685000-704999) on 10 Series or 9000 SeriesCombines.

140.00



Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84108 Conversion to a Single-Point (Hydraulic/Electric) Coupler

(for use on all 90 Series Corn Heads PIN 685201to PIN 704000 equipped with Hydraulic Deck Plates)Converts 90 Series Corn Heads with Multi-Hydraulic Hookup Points to a Single-Point CouplerHookup for use with 60 Series Combines. For Corn Heads prior to PIN 685201 and notconverted for use on 50 Series Combines, additional conversion is required. See AgriculturalSales Manual for converion to use on 50 Series.

649.00

BH84542 Corn Head Stripper Extension - For use on 9560 STS and 9570 STS Combines OnlyThe Stripper Extension is required for use on 9560 STS and 9570 STS Combines. Providesadditional length to the 600C Series Corn Head Back Stripper Bar, to allow the Stripper Barto effectively feed ears of corn to the Feederhouse opening and help eliminate ear tossing bythe Corn Head Cross Auger.

150.00

BH80863 Drive Shaft Conversion - For 494 Corn HeadsFor converting Level Land corn heads (up to PIN 685000) for use on 50, 60 and 70 SeriesCombines. Includes header driveshaft conversion parts and adapter harness.

1,634.00

BH80864 Drive Shaft Conversion - For 692 and 693 Corn HeadsFor converting Level Land corn heads (up to PIN 685000) for use on 50, 60 and 70 SeriesCombines. Includes header driveshaft conversion parts and adapter harness.

2,153.00

BH84119 Single-Point Coupler Connection Conversion (Electric only)to Single Electrical Recepticle Hookup, for use on 90 SeriesCorn Head (PIN 705101 and Up) without Hydraulic Deck PlatesConverts to 90 Series Corn Head with Single-Point Coupler to a Single Electrical Socket toSocket Receptable Hookup for use on 50 Series Combines.

281.00

BH84118 Single-Point Coupler Connection Conversion to Multi-Connection Point(Hydraulic/Electrical) Hookup for use on 90 Series Corn Headsequipped with hydraulic deck plates (PIN 705101 and Up)Converts 90 Series Corn Head equipped with Single-Point Coupler to Multi-Connection Pointhookup for use on 50 Series Combines.

565.00

900 Series Belt Pickup:BH84111 Conversion to Single-Point (Hydraulic/Electric) Coupler

for use on all 900 Series Belt Pickups PIN 685151 to PIN 704000Converts 900 Series Belt Pickup with Multi-Connection Points to a Single-Point CouplerHookup to use with 60 and 70 Series Combines. For Belt Pickups prior to PIN 685151 and notconverted for use on 50 Series Combines. Additional conversion is required. See AgriculturalSales Manual for conversion to use on 50 Series.

803.00

BH84121 Single-Point Coupler Connection Conversion to Multi-Connection Point(Hydraulic/Electric) Hookup, for use on all 900 Series Belt PickupsPIN 705101 and UpConverts all 900 Series Belt Pickups with Single-Point (Hydraulic/Electrical) Hookup toMulti-Connection Point (Hydraulic/Electric) Hookup for use with 50 Series Combines.

451.00

900 Series Draper:BH84144 Combine Adapter Harness, 31-Pin to 16-Pin

Required to use 900D Series Platform on 10 Series or 9000 Series Combines.255.00

BH84113 Draper Attachment Frame Bracket for 900 Series Draper PlatformsUp to PIN 694000 (MY 2001)Required to allow 900 Series Draper Frame to attach to 60 and 70 Series CombineFeederhouse.

75.00



Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84147 Draper Drive Retrofit Package which includes Feederhouse

Driveshaft Adapter and Wiring Harness AdapterRequired for drive connection to any non-Contour-Master 9510, 9500, 9610, 9600, CTS II, andCTS Combines.

451.00

BH81600 Draper/Straw Spreader Variable Speed In-Cab Control(Electrical Parts only)Includes circuit board for control of both Draper and STS Straw Spreader Variable Speed.Required for Draper Platform on 60 Series and 50 Series Combines up to PIN 694999. Thisattachment is required ONLY if Combine is NOT currently equipped with either Draper SpeedControl (Walker, CTS, and STS) or Spreader Speed Control (STS only).

322.00

BH81601 Draper/Straw Spreader Variable Speed In-Cab Control(Electrical parts only)Includes armrest console parts. Required for Draper Platform on 50 Series and 60 SeriesCombines, up to PIN 714999, that ARE already equipped with In-Cab Straw Spreader SpeedControl but NOT In-Cab Draper Speed Control. Required on 50 Series Combines PIN 695101and up, NOT factory equipped with either Draper Speed or Spreader Speed Control;AH220602 circuit board is REQUIRED - order from Parts.

54.00

BH81731 In-Cab Draper Speed Control Retrofit PackageIncludes Draper Speed Switch for Armrest Control Panel, Switch Decal, Combine AdapterHarness and Electrical Relay. Required for In-Cab Draper Speed Control on any 9510, 9500,9610, 9600, CTS II, and CTS Combines.

754.00

BH84112 Multi-Connection (Hydraulic/Electric) Conversion to Single-Point(Hydraulic/Electric) Coupler. For use on all 900 Series DraperPlatforms Up to PIN 685151 - PIN 704000Converts 900 Series Draper Platforms with Multi-Connection Point Hookup to a Single-Point(Electric/Hydraulic) Hookup for use with 60 and 70 Series Combines and converted 50 Series.

1,335.00

BH84122 Single-Point Coupler Connection Conversion to Multi-ConnectionPoint (Hydraulic/Electrical) Hookup for use on all 900 Series DraperPlatforms PIN 705701 and UpConverts all 900 Series Drapers, PIN 705701 and Up, with Single-Point (Hydraulic/Electrical)Hookup to Multi-Connection Point (Hydraulic/Electrical) Hookup for use with 50 SeriesCombines equipped with Multi-Connection Hookup.

1,119.00

900 Series Platforms:BH84151 Multi-Connection (Hydraulic/Electric) Hookup Conversion to

Single-Point (Hydraulic/Electric) Coupler for use on all900 Series Platforms PIN 685151 to PIN 704000Converts 900 Series Platform with Multi-Connection Point (Hydraulic/Electric) Hookup to aSingle-Point Coupler Hookup for use with 60 and 70 Series Combines. For Platforms prior toPIN 685151 and not converted for use on 50 Series Combines, additional conversion isrequired. See Agricultural Sales Manual for conversion to use on 50 Series.

1,118.00

9650 STS and 9750 STS:BH84207 Multi-Connection (Hydraulic/Electrical) Point Conversion to Single-

Point (Hydraulic/Electrical) Coupler for 50 Series STS Combineonly. Converts 9650STS and 9750STS to a Single-Point(Hydraulic/Electrical) Coupler

1,288.00

SideHill Combines:BH84660 Feederhouse Wedge Kit required for hookup of a 600C Cornhead with a John Deere

SideHill Combine. For combine models: 9500 SideHill, 9510 SideHill and 9550 SideHill1,569.00



Continued



SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...BH84215 SideHill Combine Feederhouse Frame Conversion for all 9500SH,

9510SH, 9550SH and 9650SH. Required for Feederhouse Hookup to 600Series Platforms (includes Feederhouse Front Hook Assemblies)

254.00

Threshing:BH84627 Enhanced Rice Performance Bundle

For 9670STS Rice, 9770STS Rice, 9660STS Rice, 9760STS Rice and 9860STS Rice Combines.Includes Tine Feed Accelerator (65 Tines), "Comb" feed section floor, Eighteen Threshing STSRotor Tines, Two Rotor Discharge Paddles and Discharge Concave.Note: 60 Series Combines also require Discharge Housing ordered through Service Parts.

6,093.00

BH84628 Enhanced Rice Performance BundleFor 9870 STS Rice Combine.Includes Tine Feed Accelerator (65 Tines), "Comb" feed section floor, Eighteen Threshing STSRotor Tines, Two Rotor Discharge Paddles.

5,303.00



Continued




Continued



3520 TRACK SUGARCANE BILLET HARVESTER

ENGINE:John Deere 9.0 L PowerTech

with Turbo-Charger and Air-to-AirAftercooler - (251 Kw - 337 hp) at 2100 RPM

Electronically Controlled Fuel InjectionFuel Cooler568 Liter Fuel Tank CapacityHigh Capacity Air Pre-Cleaner and FilterFuel Water Separator

TRANSMISSION AND CONTROLS:Two Hydrostatic Pumps Providing

Variable Speed0 to 9.0 km/h (5.6 mph)Two Fixed Displacement MotorsElectronic Ground Drive Control

TRACKS:Standard Sealed Chain18 In. Straight ShoesEight Bottom Rollers and One Carrier RollerSingle Piece Bolt on SprocketThru Bolts Mounting Bottom Rollers to Track Frame

BRAKES AND STEERING:Steering Control is Obtained by Varying the

Propulsion Pumps Displacement witha Steering Wheel

Oil Bath Brake Systems in SpringApplied with Hydraulic Release

ELECTRIC SYSTEM:200 Amp Alternator12 Volt

TOPPER:Cuts Whole TopsAccumulator Cushioned

BASECUTTER:Hydraulic Piston Motor DriveBolt-On Wear Plates for Basecutter LegsTwo 61 cm (24 In.) Circular Discs, Five Blades Each

CROP DIVIDERS AND FEEDROLLERS:Manual Crop Divider and Knockdown Roller TiltReversible Hydraulic Driven Crop Dividers

and Feedroller SystemTen 25.4 cm (10 In.) Diameter Feedrollers,

Including the ButtlifterFactory Hard Surfaced Feedrollers with TeethExternal Floating Feedroller Stop Beneath

Each Feedroller CradleThree Paddle Closed Buttlifter

CHOPPER:Hydraulic Radial Piston Drive38 cm (15 In.) Differential ChopperEight 95 mm BladesPRIMARY EXTRACTOR:Plastic 152 cm (5 Ft.) Primary Extractor HoodHydrostatically Variable SpeedVertical Mount, Direct Drive Fan

Four Blade Extractor Fan -Requires No Balancing with Blade Change

Hydraulically Controlled HoodAbrasive Resistant Steel Wear RingPlastic Hood Wearliner

ELEVATOR:Reinforced Structural Tube FrameLoading to Either SideGrease Cylinder Elevator Chain AdjustmentMotor Driven Directional DischargeHydraulic Lift Cylinders

SECONDARY EXTRACTOR:Plastic HoodHydraulically Controlled Hood RotationHydraulically Driven Flap

OPERATORS STATION:Forward Tilting Cab for Added ServiceabilityPressurized Cab with Heater and Air ConditionerOperator Air Suspension Seat and

Instructor/Training SeatFull Length Curved Safety WindshieldFront Windshield Washer and WiperLeft and Right Adjustable Rear View Mirrors -

Adjustable WidthOne Fire ExtinguisherJoystick Controls Float with Seat Movement For:

Propulsion Basecutter, Topper and Crop DividersHeight,Bin Flap Position and Horn

Double Displays for Harvester Functions, EngineReadings, Ground Speed and Diagnostic TroubleCodes.

Warning Light and Buzzer will Alert when a Codehas been Activated for: Low Engine Oil Pressure,High Coolant Temperature, and High Hydraulic OilTemperature, Low Hydraulic Oil Level, Low FuelLevel, Low Coolant Level, A/C CondenserRestriction,Air Cleaner Restriction, Hydraulic Oil FilterRestriction,Low Battery Voltage and More.

Basecutter Pressure GaugeSignal and Warning LightsGreenStar# ReadyIntegrated AutoTrac Components. AutoTac Ready

OTHERS:Anti-Slip Platforms in Service Areas

Compliant with All Applicable ASAE StandardsHand Rails and High Grip Eruption Plate Footing

on All Service AreasReverse AlarmAutomatic Self-Cleaning Reversing Fan for

Hydraulic Oil and Engine Cooling SystemsEngine Compartment Work Light10 Operating Lights (including Headlights)


SUGGESTEDLIST PRICE

USD ($)


AGRICULTURAL PRODUCTSJOHN DEERE SUGARCANE EQUIPMENT

3520 Track Sugarcane Billet HarvesterEquipment for Base Machine

06 May 2011 US & Canada11-Sugarcane-0100- 1


SUGGESTEDLIST PRICE

USD ($)

BASE MACHINEEX-WORKS Thibodaux, Louisiana.

0582T8 3520 Track Sugarcane Billet Harvester 403,499.00

MAIN FRAME0901 Standard Frame In Base Price

0911 Track Frame with 10 Inch Lift (Louisiana)Recommended for row profile higher than 164 m (6.45"). Base Cutter Disc clearance at itslowest position is 164 mm (6.45") and 638 mm (25.1") at its highest position.

2,637.00

0921 Standard Frame/Wide Track Frame - 508 mm (20") ShoeThis option is necessary to install 508 mm (20") wide shoes (Code 2030).

1,832.00

ENGINE1000 John Deere 9.0 L PowerTech 251 Kw (337HP) @ 2100 RPM - Tier 2

Option not available for USA and CE. It includes the standard hydraulic system for the BaseCutter and Chopper circuits.

In Base Price

1010 John Deere 9.0 L PowerTech 280 Kw (375 HP) @ 2100 RPM -Tier 2 and High Efficiency HydraulicsOption not available for USA and CE. It includes the high efficiency hydraulics for the BaseCutterand Chopper circuits. It is recommended for harvesting heavy green cane or operationsthat require high ground speed.

21,056.00

1020 John Deere 9.0 L PowerTech 251 Kw (337 HP) @ 2100 RPM - Tier 3Option only available for USA and CE. It includes the standard hydraulic system for the BaseCutterand Chopper circuits.

5,751.00

1030 John Deere 9.0 L PowerTech 280 Kw (375 HP) @ 2100 RPM - Tier 3 and High EfficiencyHydraulicsOption only available for USA. It includes thehigh efficiency hydraulics for the BaseCutterand Chopper circuits. It is recommended for harvesting heavy green cane or operationsthat require high ground speed.

26,792.00

TRACK CHAIN AND SHOES2000 Standard Chain w/18" Straight Shoes In Base Price

2010 Standard Chain w/16" Bent Shoes 1,278.00

2020 Standard Chain w/18" Bent Shoes 1,481.00

2030 Standard Chain w/20" Bent ShoesRequires Code 0921.

2,257.00

2040 Sealed and Lubricated Chain w/16" Bent Shoes 3,692.00

2050 Sealed and Lubricated Chain w/18" Bent Shoes 3,894.00

HOMOLOGATION AND CE CERTIFICATION3000 Standard Homologation

Not available for CE.In Base Price


3520 Track Sugarcane Billet HarvesterContinued



SUGGESTEDLIST PRICE

USD ($)

HOMOLOGATION AND CE CERTIFICATION ...Continued...3010 CE Certification

Requires Code 1020.1,773.00

HYDRAULIC OIL3100 Standard - 10W30 Motor Oil In Base Price

3110 RYKON 68 Hydraulic Fluid 706.00

BASECUTTER HEIGHT ASSISTANCE3200 Standard - Less ABC In Base Price

3210 ABC SystemAssisted Basecutter Control. Recommended for firm soils and fields well prepared formechanization. The system will adjust the basecutter position to maintain a preset cane stoolheight. The control uses the basecutter hydraulic motor working pressure as input to reflectthe blades height.

9,172.00

CANE TOPPER5000 Whole Topper In Base Price

5010 Shredder TopperRecommended for green cane harvesting. Shredded tops are spread out better in the field, areeasier to incorporate in the soil when cultivating and decompose faster.

6,012.00

5020 Shredder Topper with Piston MotorRequires Code 1010 or 1030.Recommended for heavy green cane harvesting. Shredded tops are spread out better in thefield, are easier to incorporate in the soil when cultivating and decompose faster. TheHydraulic Piston Motor replaces the Standard Shredder Topper (Code 5020) gear motor togive the topper additional power to cut the tops.

7,865.00

CROP DIVIDER TILT AND KNOCKDOWN ROLLER TILT5200 Manual Crop Divider and Knockdown Roller Tilt In Base Price

5210 Hydraulic Crop Divider and Knockdown Roller TiltWith this option, the Crop Dividers and the Front Knock Down Roller angle can be adjustedquickly from the cab to adapt to different cane conditions in the field.

3,495.00

OUTER SCROLLS AND KNIVES5300 Less Outer Scrolls and Less Side Knives

Recommended for light and straight cane.In Base Price

5310 Right Hand Outer Scrolls and Right Hand Side KnifeRecommended for lodged and tangled cane and when the elevator is always positioned to loadthe wagon to the left hand side of the harvester. The outside scroll rotates in oppositedirection of the right hand inside scroll to push the cane of the adjacent row away from themachine. Stalks not separated upon reaching the side knives are cut before the harvester pullsthem from the ground.

5,405.00

5320 Right Hand and Left Hand Outer Scrolls and Right Hand Side Knife 7,502.00





SUGGESTEDLIST PRICE

USD ($)

OUTER SCROLLS AND KNIVES ...Continued...5330 Right Hand and Left Hand Outer Scrolls and Right Hand and Left Hand Side Knife

Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine. Stalks notseparated upon reaching the side knives are cut before the harvester pulls them from theground.

9,657.00

5340 Right Hand and Left Hand Outer Scrolls and Less Side KnivesRecommended for light and lodged cane. The outside scrolls rotate in opposite direction of theinside scrolls to push the cane of the adjacent row away from the machine.

6,342.00

CROP DIVIDER/KNOCK DOWN ROLLERS5500 Less Crop Divider Knock Down Rollers


5510 With Crop Divider Knock Down RollersRecommended for tall and/or lodged cane. These rollers help gently guide long, wrappingcane to the center of the harvester's throat, which minimizes cane buildup at the top of the cropdivider.

3,450.00

BASE CUTTER DISC5600 61 cm (24") Circular

For dry harvesting conditions and provides a cleaner cut on stubble.In Base Price

5610 55.9 cm (22") Steel CircularAides in the removal of rocks, soil and other extraneous material.

Same Price

5620 55.9 cm (22") ScallopedAides in the removal of rocks, soil and other extraneous material.

1,140.00

BASE CUTTER LEGS5650 Standard Legs In Base Price

5660 Breakaway Basecutter LegsFuse will break to prevent mayor basecutter damage.

2,135.00

BUTTLIFTER5700 3 Paddle Closed Buttlifter In Base Price

5720 3 Paddle Open ButtlifterMinimizes soil intake and mud buildup.

408.00

DIFFERENTIAL CHOPPER5900 38 cm (15") 95 mm Eight Blade Chopper System

For 180 to 200 mm (7 to 8") billets.In Base Price

5910 38 cm (15") 95 mm Six Blade Chopper SystemFor 230 to 250 mm (9-10") billets.

Same Price

5920 38 cm (15") 95 mm Eight Blade Overlap Chopper Same Price





SUGGESTEDLIST PRICE

USD ($)

DIFFERENTIAL CHOPPER ...Continued...For 180 to 200 mm (7-8") billets. Improves feeding, increases the life of the blades andfacilitates trash removal in the primary extractor.

SILL ROLLER6000 Less Sill Roller In Base Price

6010 Sill RollerFacilitates billet movement, increases cleaning and avoids "back feeding".

1,020.00

PRIMARY EXTRACTOR WEAR RING6100 Abrasive Resistant Steel Wear Ring In Base Price

6110 Duraliner (Vidaplate) Steel Wear RingHighly abrasive resistant material prolongs the life of the wear ring.

2,985.00

SECONDARY EXTRACTOR6400 Secondary Extractor with Motor Driven Directional Discharge (1650 RPM)

Requires Code 1000 or 1020.In Base Price

6420 Secondary Extractor with Motor Driven Directional Discharge - High Performance (1900RPM)Requires Code 1010 or 1030.

523.00

6430 Less Secondary ExtractorIncludes a metal hood that replaces the plastic hood.

-2,459.00

ELEVATOR EXTENSION6500 No Elevator Extension

Recommended for row spacing between 1.4 and 1.5 meters.In Base Price

6510 30cm (12 In.) Elevator Extension InstalledRequires Code 6930 or 6940 for ocean shipment.Recommended for row spacing between 1.6 and 1.7 meters.

2,134.00


2,738.00

6530 86cm (34 In.) Elevator Extension InstalledRequires Code 6930 or 6940 for ocean shipment.

3,390.00

OPERATOR MANUALS/DECALS6700 English No Charge

6710 Spanish No Charge

6720 French No Charge

6730 Portuguese No Charge





SUGGESTEDLIST PRICE

USD ($)

OPERATOR MANUALS/DECALS ...Continued...

TRANSPORT PREP6900 Domestic Shipping

Unit fully assembled with all blades installed.In Base Price

6910 Mexico Shipping PrepUnit assembled prepared for truck transport including a support stand for the elevator.

1,047.00

6920 Export Prep - Wood w/20 Ft. Container ShipmentNot available with Codes 6510, 6520 and 6530.Elevator, crop dividers, topper, hand rails and other componentsare removed and packed on a wooden pallet to be shipped in a 20'container. The main unit is ready for shipment as Ro-Ro or on a flat rack.

1,712.00

6930 Export Prep - Metal with R/O R/O UnitElevator, topper and other components are removed and packed on ametal pallet to be shipped separately. The main unit is ready forshipment as Ro-Ro or on a flat rack.

1,997.00

6940 Export Prep - Wood w/40 Ft. Container ShipmentElevator, crop dividers, topper, hand rails and other components areremoved and packed on a wooden pallet to be shipped in a 40' container.The main unit is ready for shipment as Ro-Ro or on a flat rack.

1,712.00

SPECIAL EQUIPMENT - FACTORY INSTALLED7030 Crop Divider Vine Cutter Knives

Prevent vines from wrapping around crop dividers.681.00

7090 Radio - AM/FM with Digital Tuner/Antenna/Speakers 604.00

7120 Side Windshield Wipers and Washers on Cab 1,181.00

7170 Mud Flap AgitatorPrevents mud buildup on flap located behind feed rollers and underneath chopper drumassembly.

1,043.00

7200 Rear (Center) Pull HitchMultipurpose hitch. 19 mm (0.75") x 83 mm (3.25") plate with 42 mm (1.65") diameter pinhole. Used to retrieve the unit or haul a small wagon to open a field.

468.00

7210 Battery Remote Jump Start TerminalsFacilitates jump start without removing battery cover.

431.00

7230 In Cab Convex Mirror for ElevatorIncreases visibility towards the elevator.

267.00

7240 HID Lighting - Cab (Two Lights)Replaces two of the six cab base halogen lights with two HID lights.

898.00

7245 HID Lighting - Auxiliary (Two Lights)Replaces the two base halogen lights (located on the cooling package side wall pointedtowards the elevator and wagon) and replaces with two HID lights.

898.00

7250 Billet Length Control ValveUsed to regulate length of billets.

606.00

7290 Secondary Floor Mat 683.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...For added comfort in cab. Reduces heat from engine compartment.

7610 Whole Top Collector ExtensionRequires Code 5000.Improves standard topper performance in heavy cane. It also helps handling cane flowers.

535.00

7620 Slew WiperKeeps the swing table area clean.

365.00

7640 Elevator Speed ControlAn elevator saving device that allows the operator to reduce the speed of the elevator in lightcrops thus reducing chain, floor, wearstrip, sprocket and bearing wear.

993.00

7800 Crop Divider Gauge WheelsRequires Code 0901 or 0921, not available for Code 0911.Allows the crop divider to float in the wheel furrow.

1,630.00

ATTACHMENTS - ORDER AS DESIRED

Accessories:9420 Rotary Hand Pump For Hydraulic Oil

Recommended to fill up hydraulic tank when needed.123.00

9400 Daily Service Tool KitIncludes basic tools.

497.00

9410 Deluxe Tool Kit (includes 9400 Daily Service Tool Kit)Includes Daily Service Tools CB21481633, Supplemental Tool Kit CB11431883, andMiscellaneous Tools.

994.00

Elevator:9501 Elevator Extension without Head Shaft - 12 In. (3510 or 3520)

Recommended for row spacing between 1.6m and 1.7m.3,998.00

9502 Elevator Extension without Head Shaft - 24 In. (3510 or 3520)Recommended for row spacing between 1.7m and 1.9m.Available for Track units only.

5,945.00

9503 Elevator Extension without Head Shaft - 34 In. (3510 or 3520)Recommended for row spacing between 1.8m or more where additional reach is required toaccommodate transport equipment.Available for Track units only.

8,098.00


Accessories:CB21500441 Daily Service Tool Kit

Includes basic tools.497.00

CB21500442 Deluxe Tool Kit (Includes 9400 Daily Service Tool Kit)Includes Daily Service Tools CB21500441, Supplemental Tool Kit CB11431883 andMiscellaneous Tools.

994.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...CB21500448 Rotary Hand Pump For Hydraulic Oil


Cab:CB21500449 Side Windshield Wiper Kit (3500, 3510 or 3520) 508.00

Crop Divider:CB21472693 Crop Divider Knockdown Rollers (pig tails) (3500, 3510 or 3520)

Recommended for tall and/or lodged cane. These rollers help gently guide long, wrapping caneto the center of the harvester's throat, which minimizes cane buildup at the top of the cropdivider.

3,793.00

CB21500423 Outer Scroll - Left with Left Side Knife (3500, 3510 or 3520)Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine. Stalks notseparated upon reaching the side knives are cut before the harvester pulls them from theground.

4,510.00

CB21500422 Outer Scroll - Right with Right Side Knife (3500, 3510 or 3520)Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine. Stalks notseparated upon reaching the side knives are cut before the harvester pulls them from theground.

4,510.00

CB21500436 Outer Scrolls - Left (3500, 3510 or 3520)Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine.

3,588.00

CB21500437 Outer Scrolls - Right (3500, 3510 or 3520)Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine.

3,588.00

Elevator:CB21500429 Complete Elevator with Hydraulics and Electrical with Secondary Extractor (3510 or 3520)

A quick change option that is ready for operation when time is important.40,898.00

CB21500430 Complete Elevator with Hydraulics and Electrical without Secondary Extractor (3510 or3520)A quick change option that is ready for operation when time is important.

38,438.00

CB21460551 Elevator Extension with Head Shaft - 12 inch (3500)Recommended for row spacing between 1.6 and 1.7 meters.

4,203.00

CB21433804 Elevator Extension with Head Shaft - 24 inch (3500)Recommended for row spacing between 1.7 and 1.9 meters. Available for Track units only.

6,150.00

CB21433805 Elevator Extension with Head Shaft - 34 inch (3500)Recommended for row spacing of 1.8 meters or more where additional reach is required toaccommodate transport equipment. Available for Track units only.

8,303.00

CB21500419 Elevator Extension without Head Shaft - 12 inch (3510 or 3520)Recommended for row spacing between 1.6 and 1.7 meters.

3,998.00

CB21460553 Elevator Extension without Head Shaft - 24 inch (3510 or 3520)Recommended for row spacing between 1.7 and 1.9 meters. Available for Track units only.

5,945.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...CB21500417 Elevator Extension without Head Shaft - 34 inch (3510 or 3520)

Recommended for row spacing between 1.8 meters or more where additional reach is requiredto accommodate transport equipment. Available for Track units only.

8,098.00

CB11424503 Elevator Frame (3500)An economical choice when time is available to reattach existing components.

10,763.00

CB11473201 Elevator Frame (3510 or 3520)An economical choice when time is available to reattach existing components.

10,353.00

CB21500450 Elevator Speed ControlAn elevator saving device that allows the operator to reduce the speed of the elevator in lightcrops thus reducing chain, floor, wear strip, sprocket and bearing wear.

993.00

CB21500432 Secondary Extractor Kit (3500, 3510 or 3520) 8,918.00

CB21500431 Without Secondary Extractor Kit (3500, 3510 or 3520)Reduces elevator weight and power consumption in operations where cleaning is not a primaryconcern.

3,998.00

Engine:CB11497417 8.1L to 9L Conversion Kit - Non EGR

Not available in countries requiring Tier III Emission Standards. The United States andEuropean countries do not allow these engines to be installed in off-road equipment. Pleasecheck your local regulations before placing an order.

35,773.00

CB21500446 Field Cruise - 8.1L (3500 or 3510)Field Cruise maintains a constant engine speed and thus constant ground speedas the load on the harvester varies. Reducing to 2000 RPM will reduce fuel consumption up to15% when working in light cane. Enables the operator to set the RPM to 2200 while cuttingheavy cane or while working in unfavorable field conditions.

154.00

CB21500447 Field Cruise - 9.0L (3520)Field Cruise maintains a constant engine speed and thus constant ground speedas the load on the harvester varies. Reducing to 2000 RPM will reduce fuel consumption up to15% when working in light cane. Enables the operator to set the RPM to 2200 while cuttingheavy cane or while working in unfavorable field conditions.

154.00

CB11494506 Reversible Fan Software Change Kit (3510 with ABC)This kit includes the connecting cable and the necessary software to reprogram the ABC wheninstalling Kit CB21486716. It can be used repeatedly to reprogram multiple units.

855.00

CB21486716 Reversing Fan Kit (3510 with ABC)Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.This keeps the cooling system cool and clean while allowing the operator to focus onproductivity. (Kit CB11494506 is required)

3,998.00

CB21486717 Reversing Fan Kit (3510 without ABC)Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.This keeps the cooling system cool and clean while allowing the operator to focus onproductivity.

4,613.00

CB21491891 Reversing Fan Kit (3520)Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.This keeps the cooling system cool and clean while allowing the operator to focus onproductivity.

3,998.00





SUGGESTEDLIST PRICE

USD ($)


Feed:CB21500445 ABC Kit (3520)

Assisted Basecutter Control. Recommended for firm soils and fields well prepared formechanization. The system will adjust the basecutter position to maintain a presetcane stool height. The control uses the basecutter hydraulic motor working pressureas input to reflect the blades height.

3,895.00

CB21496086 Additional Chopper Pump (3520)(Also need attachment bundle CB21501251)Only for 3520 units equipped with 375HP Engine and HE Hydraulics options1010 or 1030Kit includes all necessary hoses, fittings and hardware. Improves feeding of very heavy cropswhere high volume productivity is required.

4,750.00

CB21500427 Billet Size Selection Valve (3510 or 3520)This valve allows the operator to select right billet length to either meet mill requirements orcustomer preference. Shorter billets are more easily cleaned and increase transport density.

974.00

CB21500444 Breakaway Basecutter Legs Kit (3500, 3510, or 3520)Protects the basecutter gear box in adverse field conditions. The legs include a flangedbreakaway sections which separate from the gear box when the basecutter discs impactobstacles such as stumps and large rocks, avoiding damage to the gear box.

5,023.00

CB21500457 Crop Divider and Front Knockdown Roller Hydraulic Tilt (3520MY10 Except Louisiana)With this option, the Crop Dividers and the Front Knock Down Roller angle can beadjusted quickly from the cab to adapt to different cane conditions in the field.

4,715.00

CB21500443 Crop Divider and Front Knockdown Roller Hydraulic Tilt 3500, 3510, 3520, 3520MY10Louisiana)With this option, the Crop Dividers and the Front Knock Down Roller angle can beadjusted quickly from the cab to adapt to different cane conditions in the field.

4,715.00

CB21500404 Extreme Overlap Chopper Kit (3510 or 3520)Improves feeding, increases the life of the blades and facilitates trash removal in the primaryextractor.

6,970.00

CB21501251 Fittings to modify Hyd Oil Tank for Additional Chopper Pump (3520) 195.00

CB11459471 Sill Roller Kit (3500)Facilitates billet movement, increases cleaning and avoids "back feeding".

2,665.00

CB21500424 Sill Roller Kit (3510 or 3520)Facilitates billet movement, increases cleaning and avoids "back feeding".

2,665.00

Topper:CB21500438 Shredder Topper (3500, 3510, or 3520)

Recommended for green cane harvesting. Shredded tops are spread out better in thefield, are easier to incorporate in the soil when cultivating and decompose faster.

11,583.00

CB21500439 Shredder Topper w/ Piston Motor (3500, 3510, or 3520)Recommended for heavy green cane harvesting. Shredded tops are spread out better in thefield, are easier to incorporate in the soil when cultivating and decompose faster. TheHydraulic Piston Motor replaces the Standard Shredder Topper gear motor to give the topperadditional power to cut the tops.

12,813.00




3520 WHEEL SUGARCANE BILLET HARVESTER

ENGINE:John Deere 9.0 L PowerTech

with Turbo-Charger and Air-to-AirAftercooler - (251 Kw - 337 hp) at 2100 RPM

Electronically Controlled Fuel InjectionFuel Cooler568 Liter Fuel Tank CapacityHigh Capacity Air Pre-Cleaner and FilterFuel Water Separator

TRANSMISSION AND CONTROLS:Two Hydrostatic Pumps Providing

Variable Speed0 to 24.6 km/h (15.3 mph)Two Fixed Displacement MotorsElectronic Ground Drive Control

TIRES:Front: 14 x 17.5 - 14 PLY Skidder TireRear: 23.5 x 25 - 20 PLY Industrial Tire

with Agriculture Lug

BRAKES AND STEERING:Hydrostatic SteeringOil Bath Brake Systems in Spring

Applied with Hydraulic Release

ELECTRIC SYSTEM:200 Amp Alternator12 Volt

TOPPER:Cuts Whole TopsAccumulator Cushioned

BASECUTTER:Hydraulic Piston Motor DriveBolt-On Wear Plates for Basecutter LegsTwo 61 cm (24 In.) Circular Discs, Five Blades Each

CROP DIVIDERS TILT AND FEEDROLLERS TILT:Manual Crop Divider and Knockdown Roller TiltReversible Hydraulic Driven Crop Dividers

and Feedroller SystemTen 25.4 cm (10 In.) Diameter Feedrollers,

Including the ButtlifterFactory Hard Surfaced Feedrollers with TeethExternal Floating Feedroller Stop Beneath

Each Feedroller CradleThree Paddle Closed Buttlifter

CHOPPER:Hydraulic Radial Piston Drive38 cm (15 In.) Differential ChopperEight 95 mm BladesPRIMARY EXTRACTOR:Plastic 152 cm (5 Ft.) Primary Extractor HoodHydrostatically Variable SpeedVertical Mount, Direct Drive FanFour Blade Extractor Fan -

Requires No Balancing with Blade Change

Hydraulically Controlled HoodAbrasive Resistant Steel Wear RingPlastic Hood Wearliner

ELEVATOR:Reinforced Structural Tube FrameLoading to Either SideGrease Cylinder Elevator Chain AdjustmentMotor Driven Directional DischargeHydraulic Lift Cylinders

SECONDARY EXTRACTOR:Plastic HoodHydraulically Controlled Hood RotationHydraulically Driven Flap

OPERATORS STATION:Forward Tilting Cab for Added ServiceabilityPressurized Cab with Heater and Air ConditionerOperator Air Suspension Seat and

Instructor/Training SeatFull Length Curved Safety WindshieldFront Windshield Washer and WiperLeft and Right Adjustable Rear View Mirrors -

Adjustable WidthOne Fire ExtinguisherJoystick Controls Float with Seat Movement For:

Basecutter, Topper and Crop Dividers Height,Bin Flap and Secondary Extractor Hood Position,Horn

Double Displays for Harvester Functions, EngineReadings, and Diagnostic Trouble Codes

Warning Light and Buzzer will Alert when a Codehas been Activated for: Low Engine Oil Pressure,High Coolant Temperature, and High Hydraulic OilTemperature, Low Hydraulic Oil Level, Low FuelLevel, Low Coolant Level, A/C CondenserRestriction,Air Cleaner Restriction, Hydraulic Oil FilterRestriction,Low Battery Voltage and More.

Basecutter Pressure GaugeSignal and Warning LightsGreenStar# ReadyReady for use with AutoTrac# Universal

OTHERS:Anti-Slip Platforms in Service Areas

Compliant with All Applicable ASAE StandardsHand Rails and High Grip Eruption Plate Footing

on All Service AreasReverse AlarmAutomatic Self-Cleaning Reversing Fan for

Hydraulic Oil and Engine Cooling SystemsEngine Compartment Work Light10 Operating Lights (including Headlights)


SUGGESTEDLIST PRICE

USD ($)



3520 Wheel Sugarcane Billet HarvesterEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)


0572T8 3520 Wheel Sugarcane Billet Harvester 345,978.00

MAIN FRAME0901 Standard Frame In Base Price

0911 Standard Frame - Half Track MountThis option is required to install Half Track assemblies typically supplied by third partycompanies in Australia. Half Track assemblies are not offered by John Deere. John Deere doesnot guarantee that mount will fit all Half Track assemblies properly. Dealer and/or customermust confirm with supplier to make sure that it will fit. Installing a Half Track assembly willvoid the Final Drives warranty.

1,998.00

ENGINE1000 John Deere 9.0 L PowerTech 251 Kw (337HP) @ 2100 RPM - Tier 2

Option not available for USA and CE. It includes the standard hydraulic system for the BaseCutter and Chopper circuits.

In Base Price

1010 John Deere 9.0 L PowerTech 280 Kw (375 HP) @ 2100 RPM -Tier 2 and High Efficiency HydraulicsOption not available for USA and CE. It includes the high efficiency hydraulics for the BaseCutterand Chopper circuits. It is recommended for harvesting heavy green cane or operationsthat require high ground speed.

21,056.00

1020 John Deere 9.0 L PowerTech 251 Kw (337 HP) @ 2100 RPM - Tier 3Option only available for USA and CE. It includes the standard hydraulic system for the BaseCutterand Chopper circuits.

5,751.00

1030 John Deere 9.0 L PowerTech 280 Kw (375 HP) @ 2100 RPM - Tier 3 and High EfficiencyHydraulicsOption only available for USA. It includes thehigh efficiency hydraulics for the BaseCutterand Chopper circuits. It is recommended for harvesting heavy green cane or operationsthat require high ground speed.

26,792.00

HOMOLOGATION AND CE CERTIFICATION3000 Standard Homologation

Not available for CE.In Base Price

3010 CE CertificationRequires Code 1020.

8,949.00

HYDRAULIC OIL3100 Standard - 10W30 Motor Oil In Base Price

3110 RYKON 68 Hydraulic Fluid 706.00

BASECUTTER HEIGHT ASSISTANCE3200 Standard - Less ABC In Base Price

3210 ABC SystemAssisted Basecutter Control. Recommended for firm soils and fields well prepared for

9,172.00


3520 Wheel Sugarcane Billet HarvesterContinued



SUGGESTEDLIST PRICE

USD ($)

BASECUTTER HEIGHT ASSISTANCE ...Continued...mechanization. The system will adjust the basecutter position to maintain a preset cane stoolheight. The control uses the basecutter hydraulic motor working pressure as input to reflectthe blades height.

CANE TOPPER5000 Whole Topper In Base Price

5010 Shredder TopperRecommended for green cane harvesting. Shredded tops are spread out better in the field, areeasier to incorporate in the soil when cultivating and decompose faster.

6,012.00

5020 Shredder Topper with Piston MotorRequires Code 1010 or 1030.Recommended for heavy green cane harvesting. Shredded tops are spread out better in thefield, are easier to incorporate in the soil when cultivating and decompose faster. TheHydraulic Piston Motor replaces the Standard Shredder Topper (Code 5020) gear motor togive the topper additional power to cut the tops.

7,865.00

CROP DIVIDER TILT AND KNOCKDOWN ROLLER TILT5200 Manual Crop Divider and Knockdown Roller Tilt In Base Price

5210 Hydraulic Crop Divider and Knockdown Roller TiltWith this option, the Crop Dividers and the Front Knock Down Roller angle can be adjustedquickly from the cab to adapt to different cane conditions in the field.

3,495.00

OUTER SCROLLS AND KNIVES5300 Less Outer Scrolls and Less Side Knives


5310 Right Hand Outer Scrolls and Right Hand Side KnifeRecommended for lodged and tangled cane and when the elevator is always positioned to loadthe wagon to the left hand side of the harvester. The outside scroll rotates in oppositedirection of the right hand inside scroll to push the cane of the adjacent row away from themachine. Stalks not separated upon reaching the side knives are cut before the harvester pullsthem from the ground.

5,405.00

5320 Right Hand and Left Hand Outer Scrolls and Right Hand Side Knife 7,502.00

5330 Right Hand and Left Hand Outer Scrolls and Right Hand and Left Hand Side KnifeRecommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine. Stalks notseparated upon reaching the side knives are cut before the harvester pulls them from theground.

9,657.00

5340 Right Hand and Left Hand Outer Scrolls and Less Side KnivesRecommended for light and lodged cane. The outside scrolls rotate in opposite direction of theinside scrolls to push the cane of the adjacent row away from the machine.

6,342.00

CROP DIVIDER/KNOCK DOWN ROLLERS5500 Less Crop Divider Knock Down Rollers






SUGGESTEDLIST PRICE

USD ($)

CROP DIVIDER/KNOCK DOWN ROLLERS ...Continued...5510 With Crop Divider Knock Down Rollers

Recommended for tall and/or lodged cane. These rollers help gently guide long, wrappingcane to the center of the harvester's throat, which minimizes cane buildup at the top of the cropdivider.

3,450.00

BASE CUTTER DISC5600 61 cm (24") Circular

For dry harvesting conditions and provides a cleaner cut on stubble.In Base Price

5610 55.9 cm (22") Steel CircularAides in the removal of rocks, soil and other extraneous material.

Same Price

5620 55.9 cm (22") ScallopedAides in the removal of rocks, soil and other extraneous material.

1,140.00

BASE CUTTER LEGS5650 Standard Legs In Base Price

5660 Breakaway Basecutter LegsFuse will break to prevent mayor basecutter damage.

2,135.00

BUTTLIFTER5700 3 Paddle Closed Buttlifter In Base Price

5720 3 Paddle Open ButtlifterMinimizes soil intake and mud buildup.

408.00

DIFFERENTIAL CHOPPER5900 38 cm (15") 95 mm Eight Blade Chopper System

For 180 to 200 mm (7 to 8") billets.In Base Price

5910 38 cm (15") 95 mm Six Blade Chopper SystemFor 230 to 250 mm (9-10") billets.

Same Price

5920 38 cm (15") 95 mm Eight Blade Overlap ChopperFor 180 to 200 mm (7-8") billets. Improves feeding, increases the life of the blades andfacilitates trash removal in the primary extractor.

Same Price

SILL ROLLER6000 Less Sill Roller In Base Price

6010 Sill RollerFacilitates billet movement, increases cleaning and avoids "back feeding".

1,020.00

PRIMARY EXTRACTOR WEAR RING6100 Abrasive Resistant Steel Wear Ring In Base Price





SUGGESTEDLIST PRICE

USD ($)

PRIMARY EXTRACTOR WEAR RING ...Continued...6110 Duraliner (Vidaplate) Steel Wear Ring

Highly abrasive resistant material prolongs the life of the wear ring.2,985.00

SECONDARY EXTRACTOR6400 Secondary Extractor with Motor Driven Directional Discharge (1650 RPM)

Requires Code 1000 or 1020.In Base Price

6420 Secondary Extractor with Motor Driven Directional Discharge - High Performance (1900RPM)Requires Code 1010 or 1030.

523.00

6430 Less Secondary ExtractorIncludes a metal hood that replaces the plastic hood.

-2,459.00

ELEVATOR EXTENSION6500 No Elevator Extension

Recommended for row spacing between 1.4 and 1.5 meters.In Base Price


2,134.00




6730 Portuguese No Charge

TRANSPORT PREP6900 Domestic Shipping

Unit fully assembled with all blades installed.In Base Price

6910 Mexico Shipping PrepUnit assembled prepared for truck transport including a support stand for the elevator.

1,047.00

6920 Export Prep - Wood w/20 Ft. Container ShipmentNot available with Codes 6510, 6520 and 6530.Elevator, crop dividers, topper, hand rails and other componentsare removed and packed on a wooden pallet to be shipped in a 20'container. The main unit is ready for shipment as Ro-Ro or on a flat rack.

1,712.00

6930 Export Prep - Metal with R/O R/O UnitElevator, topper and other components are removed and packed on ametal pallet to be shipped separately. The main unit is ready forshipment as Ro-Ro or on a flat rack.

1,997.00

6940 Export Prep - Wood w/40 Ft. Container ShipmentElevator, crop dividers, topper, hand rails and other components areremoved and packed on a wooden pallet to be shipped in a 40' container.The main unit is ready for shipment as Ro-Ro or on a flat rack.

1,712.00





SUGGESTEDLIST PRICE

USD ($)

TRANSPORT PREP ...Continued...

WHEELS AND TIRES2000 Firestone Front Tires and GPX Rear Tires

Front: Firestone Super Traction 14-17.5 (10-Ply).Rear: GPX (Galaxy) 23.5 x 25 (20-Ply) Industrial Tire with Ag Lug.

In Base Price

2010 Firestone Front Tires and Michelin Rear TiresFront: Firestone Duraforce ND 14-17.5 (14-Ply).Rear: Michelin 23.5 x 25 XHA Industrial Tire.

2,563.00

SPECIAL EQUIPMENT - FACTORY INSTALLED7030 Crop Divider Vine Cutter Knives

Prevent vines from wrapping around crop dividers.681.00

7090 Radio - AM/FM with Digital Tuner/Antenna/Speakers 604.00

7100 GPS SpeedometerHarvester ground speed is GPS calculated.

635.00

7120 Side Windshield Wipers and Washers on Cab 1,181.00

7200 Rear (Center) Pull HitchMultipurpose hitch. 19 mm (0.75") x 83 mm (3.25") plate with 42 mm (1.65") diameter pinhole. Used to retrieve the unit or haul a small wagon to open a field.

468.00

7210 Battery Remote Jump Start TerminalsFacilitates jump start without removing battery cover.

431.00

7230 In Cab Convex Mirror for ElevatorIncreases visibility towards the elevator.

267.00

7240 HID Lighting - Cab (Two Lights)Replaces two of the six cab base halogen lights with two HID lights.

898.00

7245 HID Lighting - Auxiliary (Two Lights)Replaces the two base halogen lights (located on the cooling package side wall pointedtowards the elevator and wagon) and replaces with two HID lights.

898.00

7250 Billet Length Control ValveUsed to regulate length of billets.

606.00

7290 Secondary Floor MatFor added comfort in cab. Reduces heat from engine compartment.

683.00

7610 Whole Top Collector ExtensionRequires Code 5000.Improves standard topper performance in heavy cane. It also helps handling cane flowers.

535.00

7620 Slew WiperKeeps the swing table area clean.

365.00

7640 Elevator Speed ControlAn elevator saving device that allows the operator to reduce the speed of the elevator in lightcrops thus reducing chain, floor, wearstrip, sprocket and bearing wear.

993.00





SUGGESTEDLIST PRICE

USD ($)

SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...7800 Crop Divider Gauge Wheels

Allows the crop divider to float in the wheel furrow.1,630.00

ATTACHMENTS - ORDER AS DESIRED

Accessories:9420 Rotary Hand Pump For Hydraulic Oil


9400 Daily Service Tool KitIncludes basic tools.

497.00

9410 Deluxe Tool Kit (includes 9400 Daily Service Tool Kit)Includes Daily Service Tools CB21481633, Supplemental Tool Kit CB11431883, andMiscellaneous Tools.

994.00

Elevator:9501 Elevator Extension without Head Shaft - 12 In. (3510 or 3520)

Recommended for row spacing between 1.6m and 1.7m.3,998.00


Accessories:CB21500441 Daily Service Tool Kit

Includes basic tools.497.00

CB21500442 Deluxe Tool Kit (Includes 9400 Daily Service Tool Kit)Includes Daily Service Tools CB21500441, Supplemental Tool Kit CB11431883 andMiscellaneous Tools.

994.00

CB21500448 Rotary Hand Pump For Hydraulic OilRecommended to fill up hydraulic tank when needed.

123.00

Cab:CB21500449 Side Windshield Wiper Kit (3500, 3510 or 3520) 508.00

Crop Divider:CB21472693 Crop Divider Knockdown Rollers (pig tails) (3500, 3510 or 3520)

Recommended for tall and/or lodged cane. These rollers help gently guide long, wrapping caneto the center of the harvester's throat, which minimizes cane buildup at the top of the cropdivider.

3,793.00

CB21500423 Outer Scroll - Left with Left Side Knife (3500, 3510 or 3520)Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine. Stalks notseparated upon reaching the side knives are cut before the harvester pulls them from theground.

4,510.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...CB21500422 Outer Scroll - Right with Right Side Knife (3500, 3510 or 3520)

Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine. Stalks notseparated upon reaching the side knives are cut before the harvester pulls them from theground.

4,510.00

CB21500436 Outer Scrolls - Left (3500, 3510 or 3520)Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine.

3,588.00

CB21500437 Outer Scrolls - Right (3500, 3510 or 3520)Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction ofthe inside scrolls to push the cane of the adjacent row away from the machine.

3,588.00

Elevator:CB21500429 Complete Elevator with Hydraulics and Electrical with Secondary Extractor (3510 or 3520)

A quick change option that is ready for operation when time is important.40,898.00

CB21500430 Complete Elevator with Hydraulics and Electrical without Secondary Extractor (3510 or3520)A quick change option that is ready for operation when time is important.

38,438.00

CB21460551 Elevator Extension with Head Shaft - 12 inch (3500)Recommended for row spacing between 1.6 and 1.7 meters.

4,203.00

CB21500419 Elevator Extension without Head Shaft - 12 inch (3510 or 3520)Recommended for row spacing between 1.6 and 1.7 meters.

3,998.00

CB11424503 Elevator Frame (3500)An economical choice when time is available to reattach existing components.

10,763.00

CB11473201 Elevator Frame (3510 or 3520)An economical choice when time is available to reattach existing components.

10,353.00

CB21500450 Elevator Speed ControlAn elevator saving device that allows the operator to reduce the speed of the elevator in lightcrops thus reducing chain, floor, wear strip, sprocket and bearing wear.

993.00

CB21500432 Secondary Extractor Kit (3500, 3510 or 3520) 8,918.00

CB21500431 Without Secondary Extractor Kit (3500, 3510 or 3520)Reduces elevator weight and power consumption in operations where cleaning is not a primaryconcern.

3,998.00

Engine:CB11497417 8.1L to 9L Conversion Kit - Non EGR

Not available in countries requiring Tier III Emission Standards. The United States andEuropean countries do not allow these engines to be installed in off-road equipment. Pleasecheck your local regulations before placing an order.

35,773.00

CB21500446 Field Cruise - 8.1L (3500 or 3510)Field Cruise maintains a constant engine speed and thus constant ground speedas the load on the harvester varies. Reducing to 2000 RPM will reduce fuel consumption up to15% when working in light cane. Enables the operator to set the RPM to 2200 while cuttingheavy cane or while working in unfavorable field conditions.

154.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...CB21500447 Field Cruise - 9.0L (3520)

Field Cruise maintains a constant engine speed and thus constant ground speedas the load on the harvester varies. Reducing to 2000 RPM will reduce fuel consumption up to15% when working in light cane. Enables the operator to set the RPM to 2200 while cuttingheavy cane or while working in unfavorable field conditions.

154.00

CB11494506 Reversible Fan Software Change Kit (3510 with ABC)This kit includes the connecting cable and the necessary software to reprogram the ABC wheninstalling Kit CB21486716. It can be used repeatedly to reprogram multiple units.

855.00

CB21486716 Reversing Fan Kit (3510 with ABC)Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.This keeps the cooling system cool and clean while allowing the operator to focus onproductivity. (Kit CB11494506 is required)

3,998.00

CB21486717 Reversing Fan Kit (3510 without ABC)Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.This keeps the cooling system cool and clean while allowing the operator to focus onproductivity.

4,613.00

CB21491891 Reversing Fan Kit (3520)Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.This keeps the cooling system cool and clean while allowing the operator to focus onproductivity.

3,998.00

Feed:CB21500445 ABC Kit (3520)

Assisted Basecutter Control. Recommended for firm soils and fields well prepared formechanization. The system will adjust the basecutter position to maintain a presetcane stool height. The control uses the basecutter hydraulic motor working pressureas input to reflect the blades height.

3,895.00

CB21496086 Additional Chopper Pump (3520)(Also need attachment bundle CB21501251)Only for 3520 units equipped with 375HP Engine and HE Hydraulics options1010 or 1030Kit includes all necessary hoses, fittings and hardware. Improves feeding of very heavy cropswhere high volume productivity is required.

4,750.00

CB21500427 Billet Size Selection Valve (3510 or 3520)This valve allows the operator to select right billet length to either meet mill requirements orcustomer preference. Shorter billets are more easily cleaned and increase transport density.

974.00

CB21500444 Breakaway Basecutter Legs Kit (3500, 3510, or 3520)Protects the basecutter gear box in adverse field conditions. The legs include a flangedbreakaway sections which separate from the gear box when the basecutter discs impactobstacles such as stumps and large rocks, avoiding damage to the gear box.

5,023.00

CB21500457 Crop Divider and Front Knockdown Roller Hydraulic Tilt (3520MY10 Except Louisiana)With this option, the Crop Dividers and the Front Knock Down Roller angle can beadjusted quickly from the cab to adapt to different cane conditions in the field.

4,715.00

CB21500443 Crop Divider and Front Knockdown Roller Hydraulic Tilt 3500, 3510, 3520, 3520MY10Louisiana)With this option, the Crop Dividers and the Front Knock Down Roller angle can beadjusted quickly from the cab to adapt to different cane conditions in the field.

4,715.00

CB21500404 Extreme Overlap Chopper Kit (3510 or 3520)Improves feeding, increases the life of the blades and facilitates trash removal in the primaryextractor.

6,970.00





SUGGESTEDLIST PRICE

USD ($)

ATTACHMENTS FOR FIELD CONVERSION ...Continued...CB21501251 Fittings to modify Hyd Oil Tank for Additional Chopper Pump (3520) 195.00

CB11459471 Sill Roller Kit (3500)Facilitates billet movement, increases cleaning and avoids "back feeding".

2,665.00

CB21500424 Sill Roller Kit (3510 or 3520)Facilitates billet movement, increases cleaning and avoids "back feeding".

2,665.00

Topper:CB21500438 Shredder Topper (3500, 3510, or 3520)

Recommended for green cane harvesting. Shredded tops are spread out better in thefield, are easier to incorporate in the soil when cultivating and decompose faster.

11,583.00

CB21500439 Shredder Topper w/ Piston Motor (3500, 3510, or 3520)Recommended for heavy green cane harvesting. Shredded tops are spread out better in thefield, are easier to incorporate in the soil when cultivating and decompose faster. TheHydraulic Piston Motor replaces the Standard Shredder Topper gear motor to give the topperadditional power to cut the tops.

12,813.00




1850 SELF PROPELLED CANE LOADERFour Wheel DriveBoom Swings 90 Degrees to load wagonspositioned on the right hand side

ENGINE:John Deere 4045T 105 HP (78 KW)at 2300 RPM

Turbo Precleaner, Primary Filter andSafety Element

TRANSMISSION:Hydrostatic Ground Drive System with2-Speed Transaxle and 2-Speed Motorgiving Infinitely Variable Speed in all ofHydrostatic Drive

Max Speed - 18 MPH (29 KPH) in High GearAXLES:Outboard Planetary Final DrivesRear Axle - Oscillating and SteeringHYDRAULIC SYSTEM:Machine Travel:Variable Displacement Pump0-44 GPM at 2300 RPM2-Speed MotorMax. 5500 PSI

Loading Function:Double Pump35 and 25 GPM at 2200 RPMMax. 2500 PSIDouble Valve - Swing, Flex and PileIndependent From Grab and Tilt

Priority Steering Valve on 25 GPM PumpELECTRIC SYSTEM:12 Volt120 Amp Alternator1 Maintenance Free Battery925 Amp Cold Cranking PowerSTEERING AND BRAKES:Rear Wheel HydrostaticPower SteeringPriority Oil SupplyMechanical Spring AppliedHydraulic Release Wet Disk Brake

Mounted in Axle Parking BrakeHydrostatic Braking for Service BrakesBOOM:Dual Articulated BoomMISCELLANEOUS:23.1 x 26 Size Tires 12PRPush Piler, Canopy, MufflerHorn, Backup Alarm and Work LightsAir Cleaner Service IndicatorCounterweights - Two 500 Lbs.Four Post Canopy


SUGGESTEDLIST PRICE

USD ($)



0372T8 Self Propelled Cane Loader 109,866.00

WHEELS AND TIRES2000 23.1 X 26 12PR R1 - All Four Tires In Base Price

PILER2100 Piler

Push type piler.In Base Price

2110 Less PilerOption retains directional control valve section for piler cylinder(s) control in case a piler isordered later as a part. Hoses, cylinder(s), control lever, piler and hardware are not included.

-1,277.00

OPERATOR PLATFORM2200 Four Post Canopy

Four Post Canopy is an open cab equipped with Lexan plastic on upper right hand sidewindow only.

In Base Price

2210 Cab with Air Conditioning 6,922.00


Self Propelled Cane LoaderEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

OPERATOR PLATFORM ...Continued...

COUNTERWEIGHT3000 Standard Counterweight Package

Two 227 kg. (500 Lb.) counterweights installed on left hand side, opposite the boom.In Base Price

3010 Additional Counterweight PackageProvides an additional counterweight for a total of three 227 kg. (500 Lb.) counterweightsinstalled on left hand side, opposite the boom. Improves machine stability.

471.00




TRANSPORT PREP8500 No Export Prep (US Market Only) In Base Price

8501 Export Prep (Mexico Market Only)Unit with cab or canopy installed but piler not installed.

823.00

8502 Export PrepUnit mounted on steel wheels for shipping in HC 40' container . Piler and cab (or canopy) notinstalled.

1,616.00

SPECIAL EQUIPMENT - FACTORY INSTALLED7000 Signal and Flasher Safety Lights with Slow Moving Vehicle Symbol 801.00

7010 Engine Warning System (Water Temperature and Oil Pressure)This option includes a panel warning unit that is audible and visual (red light). The engine oilpressure set point is 0.75 kg/cm sq. (11 PSI) and the coolant temperature set point is 99Degrees Celsius (210 Degrees Fahrenheit).

362.00


Miscellaneous:CB11459450 18.4 X 30 12PR 2,077.00

CB21471219 SP-1800 Engine Conversion Kit # CAT 3304 to JD4045TKit consists of a new John Deere 105HP (78KW) with its mounting skid, mounts,mounting hardware, radiator, muffler, air cleaner assy, hoses and fittings.It also includes pump drive, propulsion pump and motor, interconnect hoses/fittingsand controls. Also includes required hydraulic system hoses/fittings and filtersfor the relocation of the existing functions vane pump. Kit also contains thecomplete 12 Volt electrical system including new dash with gauges and switches,wiring harness, lights, new battery box with battery, cables and disconnect switch.NOTE # This kit is not designed for older SP1800 Loaders that had a taper shaft instead of aspline shaft vane pump.

24,500.00


Self Propelled Cane LoaderContinued


2254 SELF PROPELLED CANE LOADERFour Wheel Drive Loader with

Assisted Rear Wheel DriveBoom Swings 180 Degrees to load wagons

positioned on the right or left hand sides

ENGINE:John Deere Powered 6068T 200 HP

at 2400 RPM3 Stage Air Cleaning System

TRANSMISSION:3 SpeedHydrostatically Driven in Forward

or Reverse by an Infinitely Variable56 GPM Max Pump

Hydrostatic Dynamic BrakingFront Axle Mechanical Parking Brake

HYDRAULIC SYSTEM:Double Vane Pump

36 and 21 GPM at 2200 RPMDriving All Functions Including SteeringHigh Capacity Oil Cooler

AXLE, WHEEL AND TIRE ASSEMBLIES:Rigid Front Axle with Transmission

and Outboard Gear Final DrivesRear Oscillating Steering with

Hydraulic Rear Final Planetary Drives(2) 24.5 X 32 12PR R1

Front Wheel/Tire(2) 18.4 X 26 6PR R1

Rear Wheel/Tire

PILER:Push Piler

BOOM:6.1 Meter High Reach180 Degree Right and Left SwingSwing Cushioned at Both Extremes

GRAB:1500 Kg. Capacity

ELECTRIC SYSTEM:12 Volt90 Amp AlternatorTwo Sealed, 925 Amp Cold Cranking

Batteries

OPERATOR'S STATIONPressurized A/C Cab with

Improved VisibilityJoystick ControlsOil Pressure/Water Temperature/

Voltage Gauges

MISCELLANEOUS:Tropical Radiator and Oil CoolerWorking LampsHorn303 Liter Fuel Tank303 Liter Hydraulic SystemRemote Engine Oil DrainOil Pressure/Water TemperatureWarning System


SUGGESTEDLIST PRICE

USD ($)



0031T8 2254 Self Propelled Cane Loader 207,719.00

WHEELS AND TIRES2000 Front Tires 24.5 X 32 12PR R1

Rear Tires 18.4 X 26 6PR R1Requires Code 2500 or 2505.

In Base Price

2010 Front Tires 30.5 X 32 14PR R2Rear Tires 23.1 X 26 10PR R2Requires Code 2510.

2,063.00

PILER2100 Piler

Push type piler.In Base Price


2254 Self Propelled Cane LoaderEquipment for Base Machine



SUGGESTEDLIST PRICE

USD ($)

PILER ...Continued...2110 Less Piler

Option retains directional control valve for piler cylinder(s) control in case a piler is orderedlater as a part. Hoses, cylinder(s), piler and hardware are not included.

-4,088.00

2130 10 Chain PilerOptional Piler has two cleaning sections, each equipped with five chains that agitate the canewhile piling it to release soil and debris.

23,500.00

REAR WHEEL DRIVE SYSTEM2500 Hydraulic Power Assist for 1.5M Row Spacing

Requires Code 2000.Loader is front wheel drive with selectable assisted rear wheel drive for field conditionsdemanding more traction. The propulsion system is hydrostatic and consists of a 100ccvariable displacement pump, an 89cc fixed displacement piston motor driving the front finaldrives through the transmission, and two 45.5cc fixed displacement piston motors driving therear final drives. Front final drives have a 9.50 to 1 ratio. Rear final drives ratio is 26.28 to 1.Maximum Loader travelling speed is 29 KPH. With this option the loader thread is 3.0 meters.

In Base Price

2505 Hydraulic Power Assist For 1.8M Row SpacingRequires Code 2000.Loader is front wheel drive with selectable assisted rear wheel drive for field conditionsdemanding more traction. The propulsion system is hydrostatic and consists of a 100ccvariable displacement pump, an 89cc fixed displacement piston motor driving the front finaldrives through the transmission, and two 45.5cc fixed displacement piston motors driving therear final drives. Front final drives have a 9.50 to 1 ratio. Rear final drives ratio is 26.28 to 1.Maximum Loader travelling speed is 29 KPH. The front axle has extensions that bolt to thestandard axle (option 2500) and extend the final drives outwards. The front drive lines arelonger. On the rear, a longer axle is used with a longer tie rod. The hydraulic hoses going tothe rear motors and the steering cylinders are also longer. With this option the loader threadis 3.6 meters

3,899.00

2510 High Traction Hydraulic Power AssistThe Loader is full time four wheel drive with this option. Recommended for muddy fields orany other difficult ground condition where more traction is required. The propulsion system ishydraulic and consists of a 100cc variable displacement pump, an 89cc fixed displacementpiston motor driving the front final drives through the transmission, and two 80cc variabledisplacement piston motors driving the rear final drives. Front final drives have a 9.50 to 1ratio. Rear final drives ratio is 44.20 to 1. Maximum Loader travelling speed is 16 KPH. Withthis option the loader thread is 3.0 meters.

13,523.00




TRANSPORT PREP8500 No Export Prep (US Market Only) In Base Price

8501 Export Prep (Mexico Market Only) 823.00

8503 Export PrepUnit fully assembled with piler and cab installed

875.00

8510 Export Prep 1,568.00


2254 Self Propelled Cane LoaderContinued



SUGGESTEDLIST PRICE

USD ($)

TRANSPORT PREP ...Continued...Wheels, final drives, rear axle, piler and other components removedto ship in container. Main unit with cab installed and prepared forLift On - Lift Off Shipping.

SPECIAL EQUIPMENT - FACTORY INSTALLED7020 Radio 352.00

7030 Engine Tachometer 852.00


Miscellaneous:CB11499206 Left Side Wheel Group - Left Front Tire 24.5 X 32, 12 PlyR-R1, Left Rear Tire 18.4 X 26, 6

PlyR-R1Tires mounted on rims.

5,162.00

CB11499205 Right Side Wheel Group - Right Front Tire 24.5 X 32, 12 PlyR-R1, Right Rear Tire 18.4 X26, 6 PlyR-R1Tires mounted on rims.

5,162.00




john deere combines 9570 sts corn combine · pdf file9570 sts combine deluxe operator's...

Documents