JOHNSON CONTROLS AFTERMARKET SOLUTIONS

Reset the clock for your refrigeration plant - with an AMS Retrofit Solution

Johnson Controls DenmarkChr. X’s Vej 201 • 8270 Højbjerg • DenmarkPhone: +45 87 36 70 00 • Fax: +45 87 36 75 90Email: cg-eur-dk-ycsr@jci.comwww.sabroe.com/en/aftermarket-solutions/

PUBL

-809

7 0

4.20

16

Johnson Controls, Industrial RefrigerationLeading the world forward to new opportunities

So many things in our lives rely on refrigeration, which is why we are dedicated to providing the world with the industrial refrigeration, energy recovery and gas compression technology required today and tomorrow.

Our industrial refrigeration products allow the food industry to deliver fresh food to consumers by providing essential equipment for processing and distribution. We also supply many of the unique products required to move gas through pipelines, recover and transfer energy and to manufacture chemicals, pharmaceuticals and other products that are needed for the everyday items we depend on.

Refrigeration processes are often required to operate 24 hours a day and, with operational lifetimes of 25 years or more, reliable service and support is an essential part of our commitment to our products.

We retrofit screw compressors

of any make

�

�

�

�

�

��

��

�

�

The retrofit advantage

Retrofitting your screw compressor provides big, money-saving practical advantages compared with traditional update approaches, such as factory overhaul or simply replacing the existing unit with one of the same – or similar – design.

• Retrofitting enables you to replace old, legacy equipment with the most efficient, cost-effective and reliable equipment currently available

• The overall performance of your refrigeration setup increases significantly

• With a retrofit solution, your compressor can be pre-configured to accept future technology improvements, equipment updates and capacity expansion.

AMS Retrofit – avoiding surprises

AMS Retrofit solutions consist of:

• Delivery of the Retrofit conversion kit, including a new compressor and all the parts needed for the installation

• Rapid delivery, to ensure a minimum of service interruption

• 24-month full guarantee on the new compressor and all ancillary equipment from Johnson Controls.

An AMS Retrofit solution will keep your overall compressor revamping costs down, because whenever possible we reuse components and equipment from your existing setup (provided they are in acceptable condition).

We strongly recommend supplementing any refrigeration compressor retrofit with the operating efficiency available from a Unisab III control system. This boosts the savings you can achieve from your refrigeration setup:

• Better performance and lower operating costs• Full benefits of both variable and extended service

intervals• Extended intervals between service, resulting in

maximum uptime.

All good things come to an end

A refrigeration plant that’s tired and worn – or just old – is only ever going to go one way. Towards lesser efficiency, more breakdowns and higher operating costs.

Once your setup has reached this stage, there are normally three ways to rectify the situation:

1. Work on your existing compressor – factory overhaul2. Replace your existing compressor with another of the same type,

if still available – refurbishment3. Replace your existing compressor with a completely new one

that provides much better performance and lower operating costs – retrofitting.

Know-how makes the difference

Technicians from Johnson Controls AfterMarket Solutions (AMS) are experts in refrigeration compressors and control systems, and how to optimise their operation.

We can give you the best practical guidance about the most cost-effective solution for your particular refriger ation plant – regardless of whether that involves retrofitting, refurbishment or repair.

The best solution will save you money as well as providing significant practical benefits throughout your refrigeration setup, including greater uptime, better energy efficiency and lower operating costs.

Benefits for your business

• More effective use of the compressor because of better performance as well as maximum uptime• More reliable operation, with fewer unforeseen glitches and service interruptions• Reliable, cost-effective delivery of any spare parts subsequently needed for the new compressor.• Your refrigeration setup is reconfigured to comply with current standards and expectations,

and to comply with the latest technologies.

Retrofit conversion kit

� Suction stop valve

� Capacity regulation valve block

� Coupling complete

� Mounting parts for suction connection

� Discharge flange

� Suction connection gaskets

� Suction flange

� Suction check valve

� New screw compressor