joint master positioning clamp - caldertech€¦ · positioning kits code description 01-09-001...
TRANSCRIPT
Caldertech. Helping you make the right connections.
Joint Master Positioning Clamp
The lightweight aluminium jaws holds pipe sizes 63mm-180mm without the need for reducing liners.
When coupled together with the angle maker you have the versatility of a positioning clamp to hold pipe in 45° and 90° bends.
The quick opening handle and the patented centering system allows you to install the clamp easiliy over the pipe until the weld process has finished.
FEATURES
• Made from lightweight aluminiumand steel
• Easy to install and use
• Suitable for pipe sizes 63mm-180mm
• No reduction lines required for smaller branch outlets
• Minimal excavation required below pipe
• Available in 2 or 3 way configuration
• Patented in-line pipe centering system
Positioning Kits
v06.
18
Caldertech AustralasiaUnit 3/30 Juna Drive, Malaga WA 6090, AustraliaT: +61 (0)8 9209 1132 E: [email protected]
Caldertech EuropeBretfield Court, Dewsbury, West Yorkshire WF12 9BG, UKT: +44 (0)1924 469571 E: [email protected]
Joint Master Positioning ClampPositioning Kits
Code Description
01-09-001 Joint master carrying bag
01-09-002 Joint master positioning clamp 63-180mmØ 3 way branch leg 750mm
01-09-003 Joint master positioning clamp 2 way straight base
01-09-004 Joint master positioning clamp 63-180mmØ with 500mm angle maker
01-09-005 Joint master positioning clamp 63-180mmØ with 750mm angle maker
01-09-006 Joint master positioning clamp 63-180mmØ 3 way 500mm branch tee
01-09-007 Joint master positioning clamp 63-180mmØ 3 way 750mm branch tee
01-09-009 Joint master positioning clamp 63-180mmØ spare Jaw set complete
01-09-010 Joint master positioning clamp 63-180mmØ tee branch adapter 500mm
01-09-011 Joint master positioning clamp 63-180mmØ jaw set & branch tee only
01-09-012 Joint master positioning clamp 63-180mmØ tee adapter 750mm
Joint Master 3 Way ConfigurationJoint Master 2 Way Configuration