www.junger-audio.com • www.jungeraudioasia.com

Television Audio Processor

• Level Magic Loudness Control • 5.1 Surround Upmix • Spectral Signature by Junger Audio• SDI Embedded Audio • Dolby® Processing incl. Metadata Management

TM

l.

The wide band 8 channel processor (5.1+2 or 4x2) focuses on automatic and adaptive loudness con-trol using Jünger Audio’s renowned LEVEL MAGIC™ algorithm (ITU compliant). It also offers dynamic filters so that the sound can be ‘coloured’ much more easily than one can achieve with a traditio-nal multi band sound processor. Optional Dolby Decoding and Encoding (D, D+, or Pulse), as well as metadata management, are also provided along with 5.1 Downmix and Jünger Audio’s recently introduced UPMIX functionality.

The reference standard in audio levelling and loudness control introduces:

T*AP

_ Level Magic II Loudness Control_ 5.1 Surround Upmix_ Spectral Signature by Junger Audio_ SDI Embedded Audio_ Dolby® Processing & Metadata Management

AES/EBUin

IF slot 1in

IF slot 2in

AES/EBUout

IF slot 1out

IF slot 2out

Dolby®decoder

Dolby®encoder

LevelMagic

SpectralSignature

5.1Upmix

t

t

t

MetadataGenerator

TelevisionAudio Processor

www.junger-audio.com • www.jungeraudioasia.com www.junger-audio.com • www.jungeraudioasia.com

AES Input Number of channels: 4 x AES/EBU , AES3id Input Input impedance: unbalanced, BNC75 Ohm Input level: 0.3 … 5.0 V pp Input sample rate: 48 kHzSample Rate Converter: Input sample rate: 32 kHz ..192 kHz THD+N: < 130 dB @ 0 dBFS Resolution: 24 bitAES Output Number of channels: 4 x AES/EBU , AES3id Output impedance: 75 Ohm unbalanced, BNC Output level: 1.0 V pp unbalanced @ 75 Ohm Bypass: power fail relay bypass

Metadata Input / Output Standard: SMPTE RDD6-2008, Dolby E Metadata Stream , 115.2 kbps Connector Input: Sub-D, 9pol female Connector Output: Sub-D, 9pol male

3G/HD/SD-SDI I/O OPTIONSDI input standards (auto sensing) 3G - SMPTE 424/425M (Level A/B) HD - SMPTE 292M SD - SMPTE 259Mformats 1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60 1080i50, 59.94, 60 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60 625i50; 525i59.94, …connector BNC IEC 169-8); 75 Ohmreturn Loss > 15 dB (typ. > 18dB) from 5MHz to 1485 MHz > 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHzadaptive equalization, typical of Belden 1694A coaxial cable 250 m at 270 Mbps; 250 m at 1.485 Gbps; 150 m at 2.97 Gbpsjitter tolerance Timing: > 2UI, Alignment: > 0.7 UISDI output standards 3G - SMPTE 424/425M (Level A/B) HD - SMPTE 292M SD - SMPTE 259Mformats 1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60 1080i50, 59.94, 60 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60 625i50; 525i59.94, …quantization 10Bitconnector BNC IEC 169-8); 75 Ohmreturn Loss > 15 dB (typ. > 18dB) from 5MHz to 1485 MHz > 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHzsignal level 800 mV +/- 10%D.C. offset 0.0 V +/- 0.5 Vrise and fall time < 135 ps at HD/3G, < 800 ps at SDovershoot < 10% of amplitudeoutput jitter Timing: < 0.5 UI, Alignment: < 0.2 UI

relay bypass (manual or automatic on power fail)15 Frames video delay; 16 channel audio de-embedder / embedderVANC (SMPTE 2020-2) de-embedder / embedder; 320 ms audio delay per audio channel

ANALOGUE I/O OPTION (4x analog I/O [AN 144])connector 25pin Sub-D femaleinput impedance: > 10 kOhm, electronically balancedmax input level: 0.0 dBu … +24 dBu adjustable in 0.5 dB stepsdynamic range: 115 dBTHD+N: @ -1 dBFS, 15 dBu: -90 dBfrequency response: 20 Hz … 22 kHz (-2.0 dB)crosstalk @ 20 kHz: > 100 dBcalibration gain mismatch: < 0.3 dBoutputimpedance: 5 Ohm, electronically balancedmax. output level @ 0 dBFS: 0.0 dBu … +24 dBu adjustable in 0.5 dB stepsdynamic range: 112dBTHD+N @ -1 dBFS: 92 dBfrequency response: 20 Hz … 22 kHz (-2.0 dB)crosstalk @ 20 kHz: > 100 dBgain mismatch balanced / unbalanced: < 0.3 dBpower fail relay bypass

REMOTEElectrical Power Supply: POE, Power Over Ethernet, IEEE 802.3af Consumption: 8 W Max Cable Lenght 30 m , direct supply from Basic Device Cable Type : S/FTP CAT.5E 26AWGxMechanical Dimensions: 19 „, 1RU, depths: ca. 6 cm Ambient Temperature: 0°C to 50°C operating -20 ºC to 70 ºC non operating Humidity: 90%, non condensing

BASE UNITElectrical Power Supply: AC 85 … 264 V, 50..60 Hz dual redundant power supply Consumption: max. 46 W without hardware remote max. 58 W with hardware remote ( total power consumption depends on option boards)Mechanical Dimensions : 19 „, 1RU, depths: ca. 27 cm Weight:Ambient TTemperature: 0°C to 50°C operating -20 ºC to 70 ºC non operating Humidity: 90%, non condensing

AES/EBU I/O OPTION (4x AES I/O [DD 188])connector 25pin Sub-D femaleinputs 110 Ohm balanced or 75 Ohm unbalanced jumper selection 0.3 V … 5.0 Vpp; sample rate converter 24 Bit, input sample rate 32 kHz … 192 kHz, THD+N < 130 dB @ 0 dBFSoutputs 110 Ohm balanced or 75 Ohm unbalanced jumper selection 4.0 Vpp balanced, 1.0 Vpp @ 75 Ohm power fail relay bypass

GPI Level: +3…+30V, H-active, optocoupler Connector: 25 pin SUB-D femaleGPO Level: relay with change over contact Contact rating: 1A 24 V , 0,5 A 42 V Aux. Voltage Supply: isolated +5 V Connector: 25 pin SUB-D female

SYNC intern: 48 kHz, +- 10 ppmSYNC extern: BNC, ICE 61169-8 A AES3id , 44.1 kHz, 48 kHz 1 V ±10% at 75 Ohm Wordclock, 44.1 kHz, 48 kHz 1 V …3 V at 75 Ohm Video BB, Tri-Level SD, HD 0.5…1.0 V at 75 Ohm SYNC extern via AES input Ch1/2, AES3id , 44.1 kHz, 48 kHz 1 V ±10% at 75 Ohm SYNC extern via Option Board SDI: 48 kHz, synchronous to video (SD, HD, 3G) 44.1 kHz , 48 kHz asynchronous (HD, 3G) AES : 44.1 kHz ,48 kHz, sync to CH1/2SYNC Output Wordclock, 2 V at 75 Ohm

Technical Specifications

Television Audio Processor

Design and specifications are subject to change without notice. All rights reserved. © 2011 Jünger Audio Berlin

T*AP

on board: 4x AES/EBU I/O, Sync In, WCLK Out, Ethernet LAN, RS-232 via USB, 8x GPI in, 8x GPO out, Dolby RS-485 in/outoptions: 3G/HD/SD-SDI (16ch) • AES/EBU I/O (8ch) • Analogue I/O (4ch) Decoder Dolby Digital / Digital+ / E • Encoder Dolby Digital+ / Digital • Encoder Dolby E

Rear panel view T*AP with options

www.junger-audio.com • www.jungeraudioasia.com

_ unique “all in one box” solution_ 8ch DSP processing_ 16ch SDI support_ designed for automation control_ flexible audio interface configuration

Concept

Remote Concept

Spectral Signature by Jünger Audio

Audio Processing

_ Redundant Power Supply_ Detachable Operating Panel_ 2x Interface Option Slots_ all I/O interfaces with power fail bypass function_ Small Size: 19”, 1RU, base unit only 25cm depth operating panel only 4cm depth!_ Eco-friendly Low Power Consumption – below 60VA

_ T*AP is Processor Box and detachable Operating Panel _ Single Processor Boxes and Single Operating Panels are available

_ PoE (Power over Ethernet)_ Setup and Configuration by Web Interface_ Single Remote (Pool Units)_ Multi Remote (Single Units)_ Intelligent Access Control

_ Four Major Processing blocks: Input Conditioning 5.1/7.1 Upmix Effects (inc. Spectral Signature by Jünger Audio) Level Magic II Loudness Control

_ Three Basic Link Modes: 4x Stereo 5.1 Surround & Stereo 7.1 Surround

- Fully Automated Dynamic EQ- Unique low latency dynamic filter design- Dynamic Equalization Gain according to Reference Mask- Adaptive to Signal Input Level

Input Conditioner Level MagicSurround Processor Effects Processor

Stereo Monitor

10

INPUTS

QuasiPeak

/True Peak

InputGain

5.1 UpmixSurround Format/

Fail Over Detector

5.1 CenterDucker

DownMix

5.1

Stereo

8+2

OUTPUTS

5.1

St.

StereoDucker St

Monitor Gain

Quasi Peak

/True Peak

Loudness Meter

Leveler5.1

St.

LimiterPeak5.1

St.

4 BandParametric

EQ

MONO

MONO

Stereo Delay

Stereo Delay

5.1 Delay5.1

St.

2xC

Stereo Delay

Stereo Delay

5.1 Delay

HPFLPF

5.1

St.

2x Center

St

Comp

Leveler2x Center

SpectralSignature