k a) › iso-cert.pdf · 21 march 2016 th 30 may 2018 th 30 may 2019 usue_2 on behalf of qas...

1
REG T STRATTON C E RTT F ICATE This document certifies thot the odministration systems of Unimatic, lnc. 3501 Raleigh Avenue, St. Louis Park, MN 55416, USA hove been ossessed ond opproved by QAS lnternotional to the following management systems, stondords ond guidelines: lSO900 l:2015 The opproved odministrotion systems oPPly to the following: Unimatic, lnc., located in St. Louis Park, Minnesota, provides Precision Machining of small, close-tolerance parts primarily for the Aerospace lndustry. Detailed requirements established by customers are received via specifications, therefore Clause 8.3, Design and development of products and services, is not applicable to the Quality Management System Original Approval Current Certificate Certificate Expiry Certificate Number 27"t March 2016 3|th May 2018 3oth May 2019 .. us_3482 Signed : Certification Officer On behalf of OAS lnterhational This certificate remains valid while the holder maintains their administration systems in accordance with the Standards and guidelines stated above, which will be audited annually by OAS lnternational. The holder is entitled to display the above registration mark for the duration ofthis certificate, which should be returned to QAS lnternational upon reasonable request. lssuing Office: QAS lnternational, 20A Oxford Street, Malmesbury, wiltshire SN16 gAX, UK K a) o$EnNa 7ro- '!l ffi \ QAS International

Upload: others

Post on 27-Jun-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: K a) › iso-cert.pdf · 21 March 2016 th 30 May 2018 th 30 May 2019 usue_2 On behalf of QAS International This certificate remains valid while the holder maintains their administration

REG T STRATTON C E RTT F ICATE

This document certifies thot the odministration systems of

Unimatic, lnc.3501 Raleigh Avenue, St. Louis Park, MN 55416, USA

hove been ossessed ond opproved by QAS lnternotionalto the following management systems, stondords ond guidelines:

lSO900 l:2015The opproved odministrotion systems oPPly to the following:

Unimatic, lnc., located in St. Louis Park, Minnesota, provides Precision Machiningof small, close-tolerance parts primarily for the Aerospace lndustry.

Detailed requirements established by customers are received via specifications,therefore Clause 8.3, Design and development of products and services,

is not applicable to the Quality Management System

Original Approval

Current Certificate

Certificate Expiry

Certificate Number

27"t March 2016

3|th May 2018

3oth May 2019

.. us_3482

Signed : Certification Officer

On behalf of OAS lnterhationalThis certificate remains valid while the holder maintains their administration systems in

accordance with the Standards and guidelines stated above, which will be audited annually by

OAS lnternational. The holder is entitled to display the above registration mark for the duration

ofthis certificate, which should be returned to QAS lnternational upon reasonable request.

lssuing Office: QAS lnternational, 20A Oxford Street, Malmesbury, wiltshire SN16 gAX, UK

K a)

o$EnNa 7ro-'!l ffi\

QAS International