Section K

.Tab 21/12/06 12:25 pm Page 49

Tab 21/12/06 12:25 pm Page 50

‘making it happen’ checklists

7

checklists

ITEM Y/N / N/A KHS Amendment Required Amended Date

A full set of calculations including….1. Hydraulic calculations to support any proposed drainage design, where applicable. Details of contributing catchment areas, crossfalls/gradients, existing drainage system to be connected into including depths, pipe sizes etc. Details of gully design calculations. SUDs info (area wide impact where necessary).2. Street Lighting calculations

3. Tra!c "gures for road construction and tra!c capacity design. Including, where appropriate, calculations for proposed junctions using the current accepted software e.g. ARCADY, PICADY, OSCADY & TRANSYT

DrawingsA complete set of drawings to enable the horizontal and vertical design to be checked, (including visibility zones where applicable).

Plans to be provided at a scale of 1/500 or larger andinclude the following:1. Existing levels

2. Proposed levels (2m c/c along road centre line)

3. Contour plots of junctions at 25mm intervals4. Cross sections at 10 or 20 m intervals to a natural scale5. Longitudinal sections of channel and crownlines

6. O.S north point

Road, drainage, housing layout drawingsGeometry (alignment, radii, length etc)

Highway Boundary (including ransom strip details)

Road meterage points (every 20m)

‘making it happen’ checklists

11

checklists

ITEM Y/N / N/A KHS Amendment Required Amended Date

Road meterage points (every 20m)

Vertical alignment

Horizontal alignment

Materials and Thicknesses

Rumble strips and tra!c claming details

Crossfall/cambers

Gradients-roads & highway drains

Transitions (vertical curves)

Depth to sewers / Sewer size/capacity to include calcs.

Superelevation

Summits/valleys

Street Lighting details and drawings

Calculations

Column Type/Height

Lantern Type

Amenity/Conservation Needs

Legal easements or wayleaves for lanterns attached to private property

Speci!cation details – road construction footway construction and cycleway consturction (see Pavement and Speci!cation for requirements) must include colours and material types

We use this checklist to ensure that everything is complete or dealt with before adoption can take place

‘making it happen’ checklists

15

checklists

ITEM Y/N / N/A KHS Outstanding Complete / date

The developer has transferred the highway land shown colour-washed pink on the approved Section 38 drawings to us.

The developer has supplied us with any necessary Deeds of Grant.

The developer has supplied us with the Health and Safety File, as required by the Construction (Design & Management) Regulations 1994. It must include “as constructed” drawings and appropriate data for Highway Inventory where necessary.

The developer has supplied us with two sets of the as-built plans (indicating the adoption areas shown coloured pink) and highway drainage, including any drainage situated outside the highway limits (shown coloured blue). All new works or alterations to the existing highway must be identi!ed (coloured pink and cross-hatched red).

A Stage 3 as-built Safety Audit has been carried out and approved by us

The developer has paid any necessary commuted sums to us.

All other requirements under the Section 278/38 agreement have been fully complied with.