kamio risc-based platform - q-products · application server platform 2 single board computer 3 ibx...

1Application Server Platform

2Single Board Computer

3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI

8VITO Universal Controller

9DINO BLADE

10LCD Product Series

11Embedded System

12Industrial Computer Chassis

13Power Supply

4AFOLUX POS Panel PC

6-�

RISC-Based SolutionKAMIO RISC

14Peripherals

5.0

KAMIO RISC-based Platform

IEI KAMIO Series Solutions provide RISC-based embedded system solutions for diversified domain applications. The RISC (Reduced Instruction Set Computer) solutions use simpler instruction sets to achieve higher clock frequencies and process more instructions per clock cycle. IEI RISC solutions are especially designed to be highly durable in harsh environments. All IEI RISC solutions are rugged, compact devices that have low power consumption and are designed without failure-prone hard disks and fans. The KAMIO embedded solutions are successfully integrated in a diverse range of applications in diversified application fields :

Target applications for the KAMIO series include:

Rugged Industrial Handheld Devices Telematics POS/KIOSK Embedded Medical Devices Gaming Machine Internet Appliances Intelligent PDAs. Thin Clients Intelligent STBs Video Processing Digital Signage Instrumentation Industrial Automations Human Machine Interface

(HMI)

• Introduction

• Applications

XScale®Technology

TransportationPOS systemHome Automation

Banking Manufacture Digital Signage Security

Telematics Logistics

R I S C - I n t r o - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-�


14Peripherals

• XScale® Technology

High performance, ultra low power, lower cost, faster time-to-market, ARM V5TE compliant and robust tool chains make XScale® technology a compelling choice for applications ranging from smaller multimedia portable devices to high performance I/O or network applications.IEI provides several panel ready XScale® PXA�70 RISC based platforms for a variety of embedded computing and embedded communication devices.

Quick Capture Interface4-bit SD I/O

PWM x 4USIM card

KeypadUART x 3AC’97/I2SSSP x 3

I2SUSB client

Real time clockInterrupt controller

Timer (4F, 8S) w/watchdogGPIO

PXA27x Processor Block Diagram

3� KHz Osc�3 KHz OscCore PLLPeripheral PLL (s)

Clock divider and distribution

Power managementI�C for DVM

SRAM 256 kbytes

Memory Controller

SDRAM Control

Flash Control

SRAM Control

Intel MSL Interface

Bridge DMA Controller

JTAG

USB host LCD controller Intel® Wireless MMX™ Technology Unit

XScale® Core (32K I$, 32KD$)

XScale®Technology

Entertainment

Communication

Transportation

Equipment Manufacturing

Retailing

IDENOR/NAND FlashROMCompactFlash™

DDR ControllerMedia Acceleration EngineLCD Controller

AES-128UART (2)PSC (2)AC97, I²S, SPI, SMBus

Bus Unit16 KBInstructorCache16 KBData Cache

EnhancedMIPS32®CPU Core

32x16MAC

Static Controller

DDMA Engine

EJTAG

Camera Interface

USB 2.0 w/OTG

SD/SDIO/MMC (2)

GPIO (48)

RTC w/Batt Backup

Power ManagementSleep, Hibernate,Idle0, Idle1

P B

us

S

yste

m B

us

KAMIO Embedded Solution

IEI KAMIO Series offer much more than a simple development platform or breadboard. IEI KAMIO RISC-based embedded solutions ensure that you will have the product by the product launch date and will able to have mass production well in advance of the shipping date. IEI KAMIO solutions provide RISC CPU technologies, embedded OS support, a variety of LCD kits with different display sizes and touch screens, power management, portable battery charging, wireless communication integration, PC peripheral device connectors, and industrial input/output integrations. IEI provides multiple RISC based solutions with different RISC processors and specifications to enable the customized options available to you.

• RMI Alchemy™ AU1250

IEI provides RMI Alchemy™ RISC-based technology to enable users to play DVD-quality video efficiently at full-frame rates with low power consumption. The integrated MAE (Media Acceleration Engine) supports common digital video media including MPEG�, �, 4, DivX, and WMV9 scaled up to �0�4 x 768 pixel resolution , and delivers full D� resolution without the need for a DSP or specialized coding. The Alchemy™ technology also leverages a unique approach to DDR� memory to deliver better overall performance than SDRAM components, and IDE interface with support for PIO mode and multiword simple DMA data transfers up to a peak of 80 Mbps.

Digital SignageDigital Photo Frame

Portable TerminalGPS NavigatorHand-held Data Collector

MPEG1 MPEG2MPEG4 WMV9 5.0

DDR SDRAMDDR SDRAM

RISC-Intro-V10

R I S C - I n t r o - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-3


14Peripherals

• Freescale i.MX31

The Freescale i.MX31 solution is based on ARM1136J-FS platform running up to 532 / 665 MHz, boosted with multi-level cache system (L1, L2), and reinforced with MPEG4 hardware encoder (VGA, 30 FPS), autonomous Image Processing Unit, 2D/3D graphics accelerator, Vector Floating Point (VFP11) co-processor, and Smart RISC based DMA controller. IEI provides the Freescale i.MX3� solutions for applications such as portable devices, �D/3D gamming, �D/3D GPS navigators, telematics, vehicle PCs, and industrial embedded controllers.

• ATMEL AT91SAM9261

The ATMEL ARM9 AT9�SAM9�6� is an ultra low-power, deterministic microcontroller based on the ARM9�6EJ-S processor running at �90 MHz . The ATMEL ARM9 AT9�SAM9�6� features �60 KB SRAM and 3� KB ROM with single cycle access at maximum processor or bus speed, together with an external bus interface with controllers for SDRAM and static memories including NAND Flash and CompactFlash™. Its extensive peripheral set includes USB Full Speed Host and Device interfaces, an LCD Controller, Multimedia Card Interface (MCI), Synchronous Serial Controllers (SSC), USARTs, Master/Slave Serial Peripheral Interfaces (SPI), a three-channel 16-bit Timer Counter (TC) and a Two Wire Interface (TWI). Three 32-bit Parallel I/O Controllers multiplex the pins to/from these peripherals in order to reduce the device pin count, and peripheral DMA channels maximize the data throughput between these interfaces and the on- and off-chip memories. IEI provides ATMEL ARM9 solutions as cost-effective RISC-based embedded solutions for smart devices, remote data collectors, small panel-ready terminal, and industrial embedded controllers.

5.0

AT91SAM9261S black diagram

Smart Terminal Human Machine Interface

Remote Data Collector Industrial Embedded Controller

Automobile PC Telematics Industrial Embedded ControllerData Collector

2D/3D Gamming MachinePortable Device

Vehicle Entertainment System2D/3D GPS Navigator

CE6.0

R I S C - I n t r o - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-4


14Peripherals

KAMIO Software Support

• Embedded Operating System

Windows® CE 5.0 Windows® CE is optimized for devices that have minimal storage. The Windows® CE kernel may run in under a megabyte of memory. Devices are often configured without disk storage and can be run using ROM or CompactFlash™ memory. Windows® CE conforms to the definition of a real-time operating system, with a deterministic interrupt latency.

Embedded Linux Kernel 2.6.18Embedded Linux is the designation for Linux-based operating systems that are used in various embedded devices. Linux is suitable for other embedded applications such as networking equipment, machine control, industrial automation, navigation equipment, and medical instruments. Embedded Linux can be characterized as different from desktop and server versions of Linux in that embedded Linux is designed for devices with comparably limited resources, such as smaller sizes of RAM and much more limited secondary storage.

5.0

• Built-in ApplicationsWindows® CE 5.0 • Built-in Pocket Office including Word Viewer, Excel Viewer, Power Point Viewer.• PDF Viewer, picture viewer, WordPad editor, Media Player, FTP server, web server and DOS prompt.• IEI utilities and Remote Management Tools help configure and manage Windows® CE devices on a remote

site.• Thin Client Technology, Microsoft RDP (Remote Desktop Protocol), enables KAMIO series SBC’s to access

Microsoft Windows®-based applications installed on Microsoft Terminal Services servers

Embedded Linux Kernel 2.6.18• Built-in Embedded Linux BLOB bootloader.• GNU/Linux operating system based on the proven v�.6.�8 Linux kernel release.• Secure Shell (OpenSSH) providing 128-bit, 192-bit or 256-bit encryption between

the KAMIO and another system.• Embedded Linux drivers for onboard I/O, network and audio.

• The KAMIO SDK (software development kits)

• Windows® CE 5.0 SDK supports application programming in Microsoft eMbedded Visual C++, Microsoft Visual Studio® .NET, and Microsoft.NET Compact Framework.

• GNU/Linux kernel v�.6.�8 with GNU C library supports Embedded Linux-GCC tool chain for desktop PC running Redhat Linux 9.0. Example build of Qtopia windows system and Konqueror embedded web browser.

• The KAMIO BSP (board support package)

IEI provides optional KAMIO series Windows® CE or Linux BSPs for customers to customize their own embedded OS images.

Windows® Platform Builder

Embedded Linux Kernel configuration

Customization WinCE

Customization Linux

BSP, SDK5.0

Free Windows® CE 5.0 utilities for configuring and diagnosing your devices

Free remote management tools for remotely configuring, grouping, and updating your devices.

R I S C - I n t r o - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-5


14Peripherals

KAMIO Series RISC SBC Selection Guide

Model Name KAMIO-2701A KAMIO-1251CPU Board All -in-One All -in-One

CPU XScale® PXA�70 Alchemy™ AU��50Max Clock Rate 5�0 MHz 500 MHz

Display SVGA XGABoot ROM � MB �M B

RAM ��8 MB SDRAM ��8 MB DDR�Storage Space ��8 MB CompactFlash™ ��8 MB CompactFlash™

Operating Temperature -�0°C~70°C 0°C~70°CUSB Ports �.� Two N/AUSB Ports �.0 N/A Two

RS-�3� One OneRS-�3�/4��/485 One One

�0/�00 Mbps LAN Two TwoTouch Screen 4-wired resistive touch interface 4-wired resistive touch interface

Audio Interface Mic-in and Line-out Mic-in and Line-outDisplay Interface TTL, LVDS TTL, LVDS

Multimedia Support MPEG � MPEG �, MPEG �, MPEG 4 and WMV9

Power Supply Input 5 V and 12 V(for LCD backlight only) DC input 5 V and 12 V(for LCD backlight only) DC input

Power Consumption �� V @ 0.�5A �� V @ 0.3 AHumidity 5%-90% 5%-90%

XScale®Technology

5.0

• Easy Integration and Design for ODM/OEMThe KAMIO series embedded SBC have successfully to been integrated into a wide range of application devices such as LVDS/TTL TFT LCD panel, touch screen, storage device, RFID reader, barcode scanner, thermal printer, magnetic stripe card reader, battery solution, serial communication, wireless LAN, and POE (Power over Ethernet)…etc.

WOL/POE

Wireless LAN

GPS Receiver Siemens MC55Tri-Band

GSM/GPRS

MotorolaG�0 Tri-BandGSM/GPRS

Battery

ThermalPrinter

CardReader

Text to SpeechQVGA/VGA/WVGS/SGA/XGA

�5”��.�”�0.4”8.4”7”6.5”5.6”3.5”

OEM / ODM Service

Solution

IEI provides a special optional OEM/ODM consulting, design and production service. This service is aimed at making it easier for customers to integrate the embedded SBC into their own products and embedded systems. IEI develops customizations by understanding the entire architecture of the target application into which the IEI SBC will be installed. Such understanding is developed through constant communication between our customers and our R&D, technical support, sales and marketing, and project management teams.

R I S C - I n t r o - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-6


14Peripherals

KAMIO-2701A / 2702A

Features• Extremely durable in harsh environments.• Operates in wide temperature range.• Compact form factor.• Low power consumption.• No cooling fan required.• Built-in LVDS and TTL TFT LCD interfaces and touch controller.• Standard peripheral device interface connectors include Ethernet ports, Serial

ports, USB ports, CompactFlash™ memory, and audio.• Preinstalled Windows® CE 5.0 or Gnu/Linux with v�.6.�8 kernel embedded operating system.• Windows® CE 5.0 SDK (software development kit) or ARM-LINUX-GCC tool chain for user application software development.

Ordering Information

Packing List

Evaluation KitsThe KAMIO series also offer two ready-to-run rapid evaluation kits, the IPXA�70-DK0�/DK0�. Both evaluation kits feature all the hardware needed for immediate startup, subsequent development, and evaluation for OEM/ODM services. These evaluation kits provide SDK and Windows® CE 5.0 BSP or Embedded Linux BSP for customers to develop application software and to customize their own embedded OS image. IEI welcomes OEM/ODM of KAMIO solutions and recommends our customers use IPXA�70-DK0�/DK0� to evaluate our KAMIO solutions.

Dimensions (Unit : mm)

Specifications

�8080.�� 8.04 73.85

�.98

��0.

4�

5�.5

6

3.8

�7

9.4�3.83�8.97�8.70�5.7556.5��0.655.�5

457.

�

��.7

��.3

�3.3

�5.3

�35.

4

8�.4

�

4

Part No. Description

KAMIO-�70�A-R�0 XScale® PXA�70 wild-temperature RISC-based Embedded SBC with ��8 MB CompactFlash™ memory card and built-in Windows® CE5.0 OS

KAMIO-�70�A-R�0 XScale® PXA�70 wide-temperature RISC-based Embedded SBC with ��8 MB CompactFlash™ memory card and built-in Linux kernel �.6.�8

KAMIO-�70�AKAMIO-�70�A

� x KAMIO-�70�A / �70�A SBC board� x Utility CD iincludes utilities, SDK, and user manual� x ��8MB CompactFlash™ card with built-in Windows® CE5.0 OS or Linux Kernel �.6.�8 OS

System • CPU: 520 MHz XScale® PXA270• Boot ROM: 2 MB boot flash• RAM: 128 MB SDRAM• Storage Space: 128 MB CompactFlash™• Battery backup RTC• Watchdog Timer• Reset Button• JTAG pin-headerDisplay • Dual LCD Interface: 18-bit singal-channel LVDS and TTL LCD panel interface• Resolution: up to 800 x 600, 16-bit color graphics• Touch screen: 4-wired resistive touch interfaceI/O and Communication • Ethernet: 2 x 10/100 Mbps• Serial Port: 1 x RS-232, 1 x 4wired RS-232 or 422/485• USB Host: 2 x USB Host 1.1• Audio: 1 x Mic-in, 1 x Line-outPower • Power Supply Input: 5 V and 12 V (for LCD backlight only) DC input• Power Consumption: 12 V @ 0.15AEnviromental • Operating Temperature: -20°C~70°C• Humidity: 5%-90% (no-condensing)

Built-inLinux

KAMIO-2702A

5V / ��V DC input

LCD Inverter I/F

��8MB SDRAM

5�0 MHz PXA�70processor

LVDS LCD I/F

Battery-backupRTC

RS-�3�/4��/485 RS-�3�� x USB Host �.�

LAN�

Reset button

LAN� Mic-in

4-wiredd touch

� MB Boot ROM

Preinstalled Windows® CE 5.0 or Linux boot from CompactFlash™ memory card

Line-out

TTL LCD I/F

XScale®PX270

solution

KAMIO-2701A / 2702A

Wide Temperature-20ºC~70ºC

Options KAMIO-�70�A-BSP Windows® CE5.0 BSP for KAMIO-�70�A

KAMIO-�70�A-BSP Linux Kernel �.6.�8 BSP for KAMIO-�70�A

XScale® PXA270 RISC-Based Embedded SBC Board

K A M I O - 2 7 0 1 A - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-7


14Peripherals

KAMIO-1251

Specifications


KAMIO-��5�-R�0 RMI Alchemy™ AU��50 RISC-based Embedded SBC with ��8MB CompactFlash™ memory card and built-in Windows® CE5.0 OS



KAMIO-��5�� x KAMIO-��5� carry board� x Utility CD includes utilities, SDK, and user manual� x ��8MB CompactFlash™ card with built-in Windows® CE5.0 OS

Packing List

RMI Alchemy™ AU1250 RISC-Based Embedded SBC Board with Media Acceleration Engine Support for MPEG 1, MPEG 2, MPEG 4, and WMV9

System • CPU: 500 MHz Alchemy™ AU1250• Boot ROM: 2 MB boot flash• RAM: 128 MB DDR2• Storage Space: 128MB CompactFlash™• Battery backup RTC• Watchdog Timer• Reset Button• JTAG pin-header Display • Dual LCD Interface: 24-bit single channel LVDS and TTL LCD panel interface• Resolution: up to 1024 x 768 24bit color graphics• Video: support MPEG 1, MPEG 2, MPEG 4, and WMV9• Touch Screen: 4-wired resistive touch interface I/O and Communication • Ethernet: 2 x 10/100 Mbps• Serial Port: 1 x RS-232, 1 x 2-wired RS-232 or 422/485• USB Host: 2 x USB Host 2.0• Audio: 1 x Mic-in, 1 x Line-out

Power • Power Supply Input: 5 V and 12 V(for LCD backlight only) DC input• Power Consumption: 12 V @ 0.3 A Enviromental • Operating Temperature: 0°C~70°C• Humidity: 5%-90%RH (no-condensing)

Preinstalled Windows® CE 5.0 or Linux boot from CompactFlash™ memory card

4-wiredd touch

5V & ��V DC-Input

LCD Inverter I/FIDE

Alchemy™ AU��50 Processor

LVDS LCD I/F

TTL LCD I/F

Battery-backup RTC

LAN� & LAN�

�-wired RS-�3� or 4��/485

Full FunctionRS-�3�

� x USBHost �.0

Mic-InLine-Out

5.0

Options KAMIO-��5�-BSP Windows® CE5.0 BSP for KAMIO-��5�

K A M I O - 1 2 5 1 - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-8


14Peripherals

• Powered by a 5�0 MHz XScale® PXA�70 RISC-based processor• Low power, durable, fanless and diskless system designed to operate in a wide

temperature range• Standard peripheral device interface connectors include Ethernet ports, Serial

ports, USB ports, CompactFlash™ memory, audio and touch input.• Preinstalled standard Windows® CE 5.0 real-time operating system stored in

and boots up from default ��8 MB CompactFlash™ memory card.• Rich Windows® CE 5.0 applications and services such as IE, Word, Excel,

Power Point, PDF, picture viewer, WordPad editor, Media Player, FTP server, web server, telnet service, VNC server, DOS prompt, RDP thin client terminal service, and ActiveSync.

• Windows® CE 5.0 BSP for IPXA�70-DK0� is provided for customizing the Windows® CE 5.0 OS image.

• Powerful SDK supports Microsoft® eMbedded Visual C++® and Microsoft® Visual Studio® .NET to provide a complete development environment for building Windows® CE 5.0 application software including Web services and Microsoft® .NET Compact Framework applications.

• IEI utilities and Remote Management Tools help configure and manage Windows® CE devices on a remote site.

IPXA270-DK01 / DK02 KAMIO-2701A and KAMIO-2702A Evaluation Kits with Windows® CE 5.0 and Embedded Linux BSP

Features

XScale®Technology

Specifications

Operating System Windows® CE 5.0 GNU/Linux kernel v2.6.18

System

• 520 MHz XScale® PXA270 processor • 2 MB boot flash • ��8 MB SDRAM • ��8 MB CompactFlash™ • Battery-backup RTC • Watchdog Timer • Reset button

Display

• Type : Color Active Matrix TFT • Size : 10.4” • Resolution : 800 x 600, 16 bit color graphics • Brightness : 230 nits • Input : 4-wired resistive touch panel

I/O and Communication

• Ethernet : 2 x 10/100 Mbps • Serial port : 1 x RS-232, 1 x RS232/422/485 • USB : 2 x USB Host 1.1 • Audio : 1 x Mic-in, 1 x Line-out

Power• Power requirement : AC 100-240V power input • Power consumption : 13W

Environmental

• Operating Temperature : 0°C~50°C • Humidity : 5%-90%RH (no-condensing) • Vibration & Shock : Follow MIL-STD-810F 514.5C-3 1. Axes: 3 axes (Vertical / Transverse / Longitudinal)�. �0-500Hz, 60min/axis3. Equivalent to Z: 2.18Grms, X: 1.6Grms, Y: 1.96Grms • Front panel : IP 65 compliant

• Powered by a 5�0 MHz XScale® PXA�70 RISC-based processor • �0.4” SVGA TFT LCD with touch input• Preinstalled IEI Embedded Linux, tailored specifically for the KAMIO-�70�A• GNU/Linux kernel v�.6.�8 with GNU C library• Embedded Linux drivers for onboard I/O, network, and peripherals, such

as LCD display, CF card, SD/MMC Memory card, Stereo audio, Ethernet controller, Serial Port, RTC, USB, and touch controller.

• Secure Shell (OpenSSH) providing 128, 192 or 256-bit encryption.• Complete source code of IEI Embedded Linux and BLOB bootloader.• ARM-LINUX-GCC tool chain for desktop PC running Redhat Linux9.0.• Example build of Qtopia window system• Example build of Konqueror embedded web browser

Features

XScale®Technology

IPXA270-DK01IPXA270-DK02

I P X A 2 7 0 - D K 0 1 - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-9


14Peripherals

BSP, SDK

EthernetCF cardUSB Drive

IPXA270-DK01 : KAMIO-�70�A Evaluation Kit with BSP and SDK for Windows® CE 5.0 OS image customization.


IPXA�70-DK0�-R�0 KAMIO-�70�A Evaluation Kit with Windows® CE 5.0 BSP

IPXA�70-DK0�-R�0 KAMIO-�70�A Evaluation Kit with Embedded Linux BSP

IPXA�70-DK0�

� x IPXA�70-DK0�� x Utility CD including SDK, BSP, utilities, and technical documentations� x Power cable� x Null modem cable� x Touch pen� x Screw kit

IPXA�70-DK0�

� x IPXA�70-DK0�� x Utility CD including SDK, BSP, utilities, and technical documentations� x Power cable� x Null modem cable� x Touch pen� x Screw kit


Packing List

Power switch � x USB

� x RS-�3�/4��/485 � x RS-�3�

� x Ethernet

Mic-in

Line-out


BSP, SDK

EthernetCF cardUSB Drive

IPXA270-DK02 : KAMIO-�70�A Evaluation Kit with BSP for Embedded Linux OS image customization.

Linux Kernel �.6.�8

Secure Shell(OpenSSH)

IPXA270-DK01 / DK02

IPXA270-DK01 IPXA270-DK02

I P X A 2 7 0 - D K 0 1 - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-�0


14Peripherals

KAMIO Series RISC COM

• With the Computer-On-Module approach, all generic RISC CPU functions are readily available on an IEI off-the-shelf RISC COM, allowing system developers to focus on their core competence and unique functions of their domain applications. This approach greatly enhances productivity and reduces design cost and time to market.

• The KAMIO RISC COM solution introduces the 80/�0 rule that 80% of a system development is focused on the generic system core such as CPU resource design and management, power management, memory management, and control logics, while the remaining 20% is for flexible of customization such as communication functionalities and peripheral supports. The 80% generic development is done in IEI off-the-shelf RISC COM and the �0% special customized development is done in a specific carry board.

• The KAMIO KEB (KAMIO Expansion Bus) Interface is an IEI proprietary standard interface that defines the interface connectors between a KAMIO COM and a carry board. All IEI KAMIO RISC COMs and KAMIO carry boards support this interface for flexibility and compliance to use any type of KAMIO COM with any type of KAMIO carry board. The KAMIO KEB Interface defines the interface to attach the system to peripherals and diversified I/O functions, such as Ethernet, Wireless LAN, Full �.0B CAN, USB host/client, Serial Ports, audio, LCD display, storage media, digital I/O, and additional expansion devices.

• Besides providing several off-the-shelf and ready-to-run KAMIO carry boards, IEI also helps customers to design their best-fit carry boards which complement the COM with additional functionalities required for specific applications.

KAMIO-CM series computer-on-module

KAMIO-WL01Wireless LAN Module

KAMIO-SD01MiniSD Module

RISC COM Selection Guide

IEI RISC COM

Carry Board

Peripherals Touch Screen

Communications

Model Name KAMIO-CB01A KAMIO-CB02A KAMIO-CB03 KAMIO-CB04 KAMIO-CB05CPU Board KAMIO-CM0�A KAMIO-CM0�A KAMIO-CM0�A KAMIO-CM0�A KAMIO-CM5�

CPU 5�0 MHz XScale® PXA�70 5�0 MHz XScale® PXA�70 5�0 MHz XScale® PXA�70 5�0 MHz XScale® PXA�70 500 MHz Alchemy™ AU��50Display SVGA SVGA SXGA SXGA XGA

Operating Temperature -�0ºC~70ºC -�0ºC~70ºC -�0ºC~70ºC -�0ºC~70ºC 0ºC~70ºCUSB Ports � x USB �.0 � x USB �.0 � x USB �.0 � x USB �.0 � x USB �.0

Serial Portone RS-�3�/4��/485

one TTL RS-�3�four RS-�3�/4��/485

one RS-�3�one RS-�3�/4��/485

two isolated RS-�3�/4��/485one RS-�3�

one RS-�3�/4��/485one RS-�3�

one RS-�3�/4��/485

LAN � x �0/�00 Mbps � x �0/�00 Mbps � x �0/�00 Mbps� x �0/�00 Mbps

(one support POE)� x �0/�00 Mbps

(one support POE)Wireless LAN KAMIO-WL0� N/A KAMIO-WL0� KAMIO-WL0� KAMIO-WL0�

Mini SD Card Reader KAMIO-SD0� N/A KAMIO-SD0� KAMIO-SD0� KAMIO-SD0�PC-�04 Extension

ModuleN/A N/A

PM-300� / 300� / 3003 / 3004 / 380�

N/A N/A

Audio Interface Mic-in x �, Line-out x � Mic-in x �, Line-out x � Mic-in x �, Line-out x � �W speaker �W speakerTouch Screen 4-wired resistive touch interface 4-wired resistive touch interface 4-wired resistive touch interface 4-wired resistive touch interface 4-wired resistive touch interface

VGA Port N/A N/A one VGA port for dual displayone pin header for VGA port to

support dual displayN/A

Industrial I/O N/A N/A8 x Digital Input, 8 x Digital Output

N/A N/A

Multimedia Support MPEG � MPEG � MPEG � MPEG � MPEG �/�/4, WMV9Power Supply 9-36V DC-IN 9-36V DC-IN 9-36V DC-IN 9-36V DC-IN 9-36V DC-IN

Power Consumption �� V @ 0.4 A �� V @ 0.3 A �� V @ 0.65 A �� V @ 0.4 A �� V @ 0.5 AHumidity 5%-90%RH 5%-90%RH 5%-90%RH 5%-90%RH 5%-90%RH

I/O Module Support N/A N/AKAMIO-GPS0�, KAMIO-BT0�,

IRFR-�00KAMIO-GPS0�, KAMIO-BT0�,

IRFR-�00KAMIO-GPS0�, KAMIO-BT0�,

IRFR-�00TTL to VGA module KAMIO-VGA0� KAMIO-VGA0� KAMIO-VGA0� KAMIO-VGA0� KAMIO-VGA0�

R I S C - I n t r o - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-��


14Peripherals

• Full-featured Computer-on-Module• 5�0 MHz XScale® PXA�70 processor with 3� KB + 3� KB cache • Preinstalled Windows® CE 5.0 embedded OS• Support three internal memory and boot up options

Dufault: 2 MB boot ROM for boot loader and 128 MB CF card in carry board for embedded OS and user programs/data.

OEM options: 32 MB or 64 MB Strata NOR Flash (boot loader + OS) or, � MB boot ROM for boot loader and 64 MB/��8MB M-System G3 DOC (Disk on chip) for embedded OS and user programs/data. • Embedded power management IC requires only a single power supply and all

additional voltages are generated on board.• I/O expansion connects to a carry board with I/O fuctions and connectors.

KAMIO-CM01A Small XScale® PXA270 RISC-Based Computer-on-Module board with I/O extension interface to a standard or OEM/ODM carry board

Features Specifications• CPU: 520 MHzXScale® PXA�70• Boot ROM: 2 MB boot flash• RAM: 128 MB SDRAM• Power IC TI TPS650�0• Power Requirement: 0.5 A @ 5 V (max.)• Operating Temperature: -20°C~70°C• KAMIO Expansion Bus (KEB) Rev1.1: Two 120-pin female Aces 88078-

120 (100V/0.5A, Pitch = 0.5mm) connector with a total of 240 pins to connect with two male connectors on a carry board.


KAMIO-CM0�A-R�0 IEI 5�0 MHz wide-temperature XScale® Computer-on-Module board



• Small form factor Computer-on-Module design to stand on an OEM carry board for adaptation to various applications.

• KAMIO Expansion Bus (KEB) for a carry board to provide diversified I/O functions, such as Ethernet, Wireless LAN, Full �.0B CAN, USB host/client, Serial Ports, audio, LCD display, storage media, digital I/O, and additional expansion devices.

• Several IEI standard COTS (commercial off-the-shelf) carry boards are provided for fast system intergration and application device development.

• Embedded Linux is provided based on OEM service.

70.284.11

78.5

28.04

4.1145.77

54

3

Applications

I/F Type Descriptions # Pins

Common Basic I/O Interface I/O bus, PCMCIA, USB, LCD, AC'97 and UART �60

CPU-dependent I/O Interface Camera, SD and MMC 40

Power Interface 3.6 V ~ 6V DC input and Power Control 3�

Reserved FFU 8

Total: �40

Your OEM carry board or IEI standard carry board

KAMIO-CM0�AComputer-on-Module

SDRAM

Boot ROM

SDRAM

Power management IC SDRAM

XScale® PXA�70 5�0 MHz Processor SDRAM

KAMIO Expansion Bus (KEB) to a carry board

KAMIO-CM0�A � x KAMIO-CM0�A Computer-on-Module board � x User manual

Packing List

70.�8

78.5

4.��

4.��

�8.04

45.77

54

3

KAMIO-CM01A


XScale®PX270

solution

K A M I O - C M 0 1 A - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-��


14Peripherals

KAMIO-CM51

• CPU: 500 MHz Alchemy™ AU1250• Boot ROM: 2 MB boot flash• RAM: 128 MB DDR2• CPLD: Lattice LC4064V, control logics for interrupts, PC card, and hardware

registers• Power IC: LINEAR LTC3555• Power Requirement: 0.5 A @ 5 V (max.)• Operating Temperature: 0°C ~70°C • KAMIO Expansion Bus (KEB) Rev1.1: two 120-pin female Aces 88078-120 (100V/0.5A, Pitch = 0.5mm) connector, with a total of �40 pins to connect with two male connectors on a carry

board.

• Full-featured Computer-on-Module• 500 MHz Alchemy™ AU��50 • Preinstalled Windows® CE 5.0 embedded OS• Support three internal memory and boot up options

Dufault: 2 MB boot ROM for boot loader and 128 MB CF card in carry board for embedded OS and user programs/data.

OEM options: 32 MB or 64 MB Strata NOR Flash (boot loader + OS) or, �MB boot ROM for boot loader and 64 MB or ��8 MB M-System G3 DOC (Disk on chip) for embedded OS and user programs/data. • Embedded power management IC requires only a single power supply and

all additional voltages are generated on board.• I/O expansion connects to a carry board with I/O fuctions and connectors.• Media Acceleration Engine supports MPEG �, MPEG �, MPEG 4 and WMV 9

FeaturesSpecifications


KAMIO-CM5�-R�0 IEI 500 MHz Alchemy™ AU��50 Computer-on-Module board



• Small form factor Computer-on-Module design to stand on an OEM carry board for adaptation to various applications.

• KAMIO Expansion Bus (KEB) for a carry board to provide diversified I/O functions, such as Ethernet, Wireless LAN, Full �.0B CAN, USB host/client, Serial Ports, audio, LCD display, storage media, digital I/O, and additional expansion devices.

• Several IEI standard COTS (commercial off-the-shelf) carry boards are provided for fast system intergration and application device development.

• Embedded Linux is provided based on OEM service.

Applications

KAMIO-CM5� � x KAMIO-CM5� Computer-on-Module board � x User manual

Packing List

RMI Alchemy™ AU1250 RISC-based Computer-on-Module board with Media Acceleration Engine for MPEG 1, MPEG 2, MPEG 4 and WMV 9

KAMIO Expansion Bus (KEB) to a carry Board

DDR�

Boot ROM

DDR�

RMI AU��50 processor

78.4970.26

4.11

45.7

753

.98

4.6

70.034.52

4.11

K A M I O - C M 5 1 - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-�3


14Peripherals

KAMIO-CB01A Cost-effective COTS (Commercial off-the-shelf) carry board for KAMIO-CM01A Computer-on-Module

Specifications System• Battery-backup RTC• Watchdog Timer• Reset button• JTAG pin-headerDisplay• Dual LCD Interface: 18-bit single channel LVDS and TTL LCD panel interface• Resolution: up to 800 x 600 (XScale® PXA270)• 4-wired resistive touch interfaceCommunication Bus: KAMIO Expansion Bus (KEB) : Rev 1.0 support to carry CPU moduleI/O Interfaces: � x �0/�00 Mbps Ethernet � x RS-�3�/4��/485 serial port � x TTL RS-�3� serial port � x USB Host �.0 � x Mic-in � x Line-out 8 x 8 matrix keypad interface supports 64 keys � x Wireless LAN module SPI interface � x Mini-SD module SDIO interface Power • Power Supply Input: 9~36V DC-IN • Power Consumption: 12 V @ 0.4 A Environmental• Operating Temperature: -20°C~70°C• Humidity: 5%RH to 90%RH (non-condensing)


KAMIO-CB0�A-0�A-R�0 IEI wide-temperature carry board for KAMIO-CM0�A Computer-on-Module with ��8 MB CF memory card and Windows® CE5.0 license

KAMIO-CB0�A-0�AUX-R�0 IEI wide-temperature carry board for KAMIO-CM0�A Computer-on-Module with ��8 MB CF memory card and v�.6.�8 Linux Kernel



KAMIO-CB0�A

� x KAMIO-CB0�A carry board� x Utility CD includes utilities, SDK, and user manual� x ��8MB CompactFlash™ card with built-in Windows® CE5.0 OS

Packing List

95

5 8.2 70.28 25.5

114

5.74 15.75 20.16 20.14 34.9

15.35

12.67.1

8.4

13.6

8.5

49.66

45.774.24

45.015

29.080.91

38.86

28.17

��4

70.�8 �5.58.�5

�8.�7

545.0�

95

5.74 �5.75 �0.�6 �0.�4 34.9

38.860.9�

45.77

�9.08

4.�4

49.66

�5.35��.6

8.5

7.�

8.4

�3.6

RS-�3�/4��/485

Preinstalled Windows® CE 5.0 boot from CompactFlash™ Memory card

Dual USB �.0 Host LAN

Reset button

4-wiredd TouchKAMIO Expansion Bus (KEB)

LCD Back Light

JTAG

Battery-backupRTC

Keypad

Mic-in / Line-out

Wireless LAN(SPI) Module

Mini SD ModuleI/F

TTL LCD I/F

TTL RS-�3�

LVDS LCD I/F

KAMIO-CM01Acomputer-on-module

KAMIO-WL01Wireless LAN Module

KAMIO-SD01MiniSD Module

KAMIO-CB01A

Options

Features• Extremely durable in harsh environments.• Operates in a wide-temperature range.• Low power consumption and No cooling fan required.• Built-in LVDS and TTL TFT LCD interfaces and touch controller.• Standard peripheral device interface connectors include Ethernet, Serial, USB ports,

CompactFlash™ memory and audio.• Preinstall Windows® CE 5.0 or GNU/Linux v�.6.�8 kernel embedded OS.• Windows® CE 5.0 SDK or ARM-LINUX-GCC tool chain for user application software

development.

KAMIO-CB0�A-0�A-BSP Windows® CE5.0 BSP for KAMIO-CM0�A Computer-on-Module and KAMIO-CB0�A Backplane

KAMIO-CB0�A-0�AUX-BSP Linux Kernel �.6.�8 BSP for KAMIO-CM0�A Computer-on-Module and KAMIO-CB0�A Backplane


9~36VDC-IN

K A M I O - C B 0 1 A - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-�4


14Peripherals

KAMIO-CB02ACOTS (Commercial off-the-shelf) carry board for KAMIO-CM01A Computer-on-Module with additional 4 x RS-232/422/485

SpecificationsSystem• Battery-backup RTC• Watchdog Timer• Reset button• JTAG pin-headerDisplay• Dual LCD Interface: 18-bit single channel LVDS and TTL LCD panel interface• Resolution: up to 800 x 600 (XScale® PXA270)• 4-wired resistive touch interfaceCommunication Bus: KAMIO Expansion Bus (KEB) : Rev 1.0 support to carry CPU moduleI/O Interfaces: � x �0/�00 Mbps Ethernet 4 x RS-�3�/4��/485 serial port � x RS-�3� serial port � x USB Host �.0 � x Mic-in � x Line-out 8 x 8 matrix keypad interface supports 64 keysPower • Power Supply Input: 9~36 V DC-IN,• Power Consumption: 12 V @ 0.3 AEnvironmental• Operating Temperature: -20°C~70°C• Humidity: 5%RH to 90%RH (non-condensing)



KAMIO-CB0�A-0�A-R�0 IEI wide-temperature carry board for KAMIO-CM0�A Computer-on-Module with ��8 MB CF memory card and Windows® CE5.0 license

KAMIO-CB0�A-0�AUX-R�0 IEI wide-temperature carry board for KAMIO-CM0�A Computer-on-Module with ��8 MB CF memory card and v�.6.�8 Linux Kernel

Ordering InformationKAMIO-CB0�A

� x KAMIO-CB0�A carry board� x Utility CD includes utilities, SDK, and user manual� x ��8 MB CompactFlash™ card with built-in Windows® CE5.0 OS

Packing List

77.0

6

47.24 45.77 42.98

70.2

814

.5

76.17

19.9

1

102

12.2

9

52.5

8

33.53 49.91 24.96 17.96 13.21

146

5

13.5

10.5

2

7.1

13.6

15.3

5

�46

45.77 4�.9847.�4

76.�7

5

77.0

6�9

.9�

5�.5

8

33.53 49.9� �4.96 �7.96 �3.��

��.�

9�4

.570

.�8

�0�

�3.6

�5.3

5

7.�

�0.5

�

�3.5

Your OEM carry board or IEI standard carry board

KAMIO-CM01AComputer-on-Module

TTL LCD I/FKAMIO Expansion Bus (KEB)

MIC-in / Line-out

LCD Back Light

PreinstalledWindows® CE 5.0 boot from CompactFlash™ Memory card

LVDS LCD I/F

Keypad

4-wiredd Touch

UART ModeSwitch

9~36VDC-IN

Battery-backup RTC

Dual USB �.0 HostRS-�3�/4��/485 Reset buttonLANRS-�3�

KAMIO-CB02A

Features• Extremely durable in harsh environments.• Operates in a wide-temperature range.• Low power consumption and No cooling fan required.• Built-in LVDS and TTL TFT LCD interfaces and touch controller.• Standard peripheral device interface connectors include Ethernet, Serial, USB ports,


development.

Options KAMIO-CB0�A-0�A-BSP Windows® CE5.0 BSP for KAMIO-CM0�A Computer-on-Module and KAMIO-CB0�A backplane

KAMIO-CB0�A-0�AUX-BSP Linux Kernel �.6.�8 BSP for KAMIO-CM0�A Computer-on-Module and KAMIO-CB0�A backplane


K A M I O - C B 0 2 A - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-�5


14Peripherals

KAMIO-CB03

Ordering InformationKAMIO-CB03

� x KAMIO-CB03 carry board� x Utility CD includes utilities, SDK, and user manual� x ��8 MB CompactFlash™ card with built-in Windows® CE5.0 OS

SpecificationsDimensions (Unit : mm)

COTS (Commercial off-the-shelf) carry board for KAMIO-CM01A Computer-on-Module with graphic chip for dual display and high resolution, I/O functions support DIO and isolated RS-232/422/485

System • Battery backup RTC• Watchdog Timer• Reset Button• JTAG pin-headerDisplay • Dual LCD Interface: 18-bit LVDS and TTL LCD panel interface• Display Controller: SMI SM-502 8 MB graphic memory• Extension VGA: CRT DSUB-15Pin• Resolution: Up to 1280 x 1024 and support Dual Display• Touch screen: 4-wired resistive touch interfaceCommunication Bus KAMIO Expansion Bus (KEB) : Rev 1.0 support to carry CPU moduleI/O Interfaces � x �0/�00 Mbps Ethernet 1 x RS-232/422/485 serial port (full function) 2 x RS-232/422/485 serial port (isolated) � x USB Host �.0 � x Mic-in � x Line-out 8 channel digital inputs 8 channel digital outputs � x PC/�04 interface for PM-300� / 300� / 3003 / 3004 / 380� I/O and communication module � x reserved TTL UART interface for KAMIO-GPS0�, KAMIO-BT0� or IRFR-�00 Module

(XScale® PXA270)Power • Power Supply Input: 9-36V DC-IN• Power Consumption: 12 V @ 0.65 AEnviromental • Operating Temperature: -�0°C~70°C • Humidity: 5%-90%RH (no-condensing)

USB Client

PC/�04 I/F

AT mode

LCD Inverter I/F

ATX mode

Audio

LVDS LCD I/FTTL LCD I/F

Battery-backup RTC

SDIO I/F CIF

8 x Isolated Digital Output

8 x Isolated Digital Input

Isolated RS-�3�/4��/485 Reset Button

9~36V DC-IN RS-�3�/4��/485 VGA LAN � & LAN � � x USB Host �.0

Features• Extremely durable in harsh environments.• Operates in a wide-temperature range.• Low power consumption and No cooling fan required.• Support digital I/O, isolated serial ports, high resolution and dual display function.• Standard peripheral device interface connectors include Ethernet, Serial, USB ports,


development.

Packing List

KAMIO-CB03



KAMIO-CB03-0�A-R�0 IEI wide-temperature carry board for KAMIO-CM0�A Computer-on-Module with ��8 MB CF memory card and Windows® CE5.0 license

Options KAMIO-CB03-0�A-BSP Windows® CE5.0 BSP for KAMIO-CM0�A Computer-on-Module and KAMIO-CB03 Backplane

SPI I/F

K A M I O - C B 0 3 - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-�6


14Peripherals

KAMIO-CB04 / CB05


KAMIO-CB04 KAMIO-CB05

� x KAMIO-CB04 / CB05 carry board� x Utility CD includes utilities, SDK, and user manual� x ��8MB CompactFlash™ card with built-in Windows® CE5.0 1 x Extension VGA cable (KAMIO-CB04 only)

Packing List

SpecificationsDimensions (Unit : mm)

COTS (Commercial off-the-shelf) carry board for KAMIO-CM series Computer-on-Module with graphic chip for dual display and high resolution, support POE (Power over Ethernet) function

System • Battery backup RTC• Watchdog Timer• Reset Button• JTAG pin-header Display • Dual LCD Interface: 18-bit LVDS and TTL LCD panel interface• Display Controller: SMI SM-502 8 MB graphic memory (KAMIO-CB04 only)• Extension VGA: CRT DSUB-15Pin (KAMIO-CB04 only)• Resolution: Up to 1280 x 1024 and support dual display (KAMIO-CB04) or

1024 x 768 (KAMIO-CB05)• Video: Support MPEG 1, MPEG 2, MPEG 4, and WMV9 (KAMIO-CB05)• Touch Screen: 4-wired resistive touch interface Communication Bus KAMIO Expansion Bus (KEB) : Rev 1.0 support to carry CPU moduleI/O Interfaces 2 x 10/100 Mbps Ethernet (one supports POE function) � x RS-�3� serial port � x RS-�3�/4��/485 serial port � x USB Host �.0 � x � W built-in speaker � x reserved TTL UART interface for KAMIO-GPS0�, KAMIO-BT0� or IRFR-�00 Module

(XScale® PXA270) � x reserved TTL UART interface for KAMIO-GPS0�, KAMIO-BT0� or IRFR-�00 Module

(Alchemy™ AU1250)Power • Power Supply Input: 9 V - 36 V DC-IN and POE (Power Over Ethernet 802.3 af)• Power Consumption: 12 V @ 0.4 A (KAMIO-CB04) or 12 V @ 0.5 A (KAMIO-CB05)Enviromental • Operating Temperature: -20°C~70°C (KAMIO-CB04) or 0°C~70°C (KAMIO-CB05)• Humidity: 5%-90%RH (no-condensing)

Features• Extremely durable in harsh environments.• Operates in a wide-temperature range.• Low power consumption and No cooling fan required.• One LAN supports POE (Power over Ethernet) function• Standard peripheral device interface connectors include Ethernet, Serial, USB ports,


development

KAMIO-CB04


Part No. DescriptionKAMIO-CB04-0�A-R�0 IEI wide-temperature carry board for KAMIO-CM0�A Computer-on-Module with ��8 MB CF memory card and Windows® CE5.0 license

KAMIO-CB05-5�-R�0 IEI standard carry board for KAMIO-CM5� Computer-on-Module with ��8 MB CF memory card and Windows® CE5.0 license

Options KAMIO-CB04-0�A-BSP Windows® CE5.0 BSP for KAMIO-CM0�A Computer-on-Module and KAMIO-CB04 backplane

KAMIO-CB05-5�-BSP Windows® CE5.0 BSP for KAMIO-CM5� Computer-on-Module and KAMIO-CB05 backplane

KAMIO-POE-R�0 Extension Power over Ethernet module

RS-�3�

Preinstalled Windows® CE 5.0 boot from CompactFlash™ Memory card

LCD Back LightVGATTL LCD I/FLVDS

SMI SM-50�

CIFSpeakerAudio

Keypad

KAMIO Expansion Bus

SDIO I/F

RS-�3�

RS-232 COM5/6 (SMI)

TTL COM3/4 (PXA270)

Reset button

Dual USB �.0 HostES-�3�/4��/485

LAN� ( Support Power over Ethernet)

LAN�

Model Name KAMIO-CB04 KAMIO-CB05CPU Board KAMIO-CM0�A KAMIO-CM5�

CPU 5�0 MHz XScale® PXA�70

500 MHz Alchemy AU��50

Display SXGA XGAOperating Temperature -�0ºC~70ºC 0ºC~70ºC

VGA Port

One pin header for VGA port to support dual display

N/A

Multimedia Support MPEG � MPEG �/�/4,

WMV9

Power over

Ethernet

K A M I O - C B 0 4 - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-�7


14Peripherals

The KAMIO Companion ModuleIEI provides various companion modules for KAMIO series platforms.

KAMIO-WL0�

KAMIO-GPS0�

PM-380�

IRFR-�00

KAMIO-BT0�

KAMIO-VGA0�

KAMIO-SD0�

PDAPrinter

Keyboard and Mouse

Barcode Reader

Headphone

+

+

Internet

Use �6 channel ANTARIS 4 positioning engine and support DGPS, WAAS, EGNOS and MSAS to get exacter global position speedily.

Bluetooth module communicates with a wide range of electronic products from PDAs, cellphones, keyboard, mouse and barcode readers.

RFID reader solutions for High Frequency (HF) and Ultra High Frequency (UHF) RFID systems, and each reader solution is compliant with corresponding industrial standards.

MiniSD card reader upgrades storage space for user's data and program.

Convert LCD TTL interface to analog VGA output to ease of evaluation and development of KAMIO SBC

PC/�04 GSM/GPRS module to feature KAMIO SBC with GSM/GPRS function.

IEI

SMS

• Global Positioning System module • Bluetooth communication module

• RFID reader module • Mini SD card reader module

• LCD signal converter module • GSM/GPRS communication module

R I S C - I n t r o - V 1 0

Fleet Management Railway Information System



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-�8


14Peripherals

KAMIO-WL01 / SD01■ COTS (Commercial off-the-shelf) 802.11b/g wireless LAN module■ COTS (Commercial off-the-shelf) Mini SD reader module

Specifications KAMIO-WL01• Compliant with 80�.��b and 80�.��g standards for �.4 GHz wireless LAN• Up to �� Mbps data transfer rate in 80�.��b mode of operation• Up to 54 Mbps data transfer rate in 80�.��g mode of operation• Connector type: 10-pin 2.0 mm box header• Antenna: With 100 mm length 2dBi SMA type antenna• Interface: SPI (Serial Periphreal Interface) or SDIO (Secure Digital Input/Output)• Chipset: APM 6281• OS support: Windows® CE 5.0 and Embedded Linux• Operating voltage: 3.3 V• Consumption current: < 50 mA• Operating temperature: 0°C~70°C• KAMIO integration supports KAMIO-CB0�A / CB03 / CB04 / CB05

KAMIO-SD01• Support to read Mini SD Card• Up to 80X data transfer rate• OS support: Windows® CE and Embedded Linux• Connector type: 10-pin 2.0 mm box header• Interface: SDIO (Secure Digital Input/Output)• Operating Voltage: 3.3 V• Consumption current: < 100 mA• Operating temperature: 0°C~70°C• KAMIO integration supports KAMIO-CB0�A / CB03 / CB04 / CB05

Mini SD Slot

SD InterfaceSPI Interface

KAMIO-WL0� KAMIO-SD0�



KAMIO-WL0�-R�0 80�.��b/g wireless LAN module

KAMIO-SD0�-R�0 Mini SD reader module


KAMIO-WL0�

� x KAMIO-WL0� module card� x Connection cable� x �00 mm �dBi SMA type antenna� x User manual

KAMIO-SD0�� x KAMIO-SD0� module card� x Connection cable� x User manual

Packing List

KAMIO-WL01 KAMIO-SD01

42.043.99

50.01

11

22

6.57

2.38

29.04

2.1

�9.04

4�.04

50.0�

3.99

��

��.�

6.57

�.38

SDIO Interface

K A M I O - W L 0 1 - V 1 0



3IBX Series POS PC

5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply


6-�9


14Peripherals

KAMIO-BT01 / GPS01■ COTS (Commercial off-the-shelf) Specification v1.2 Bluetooth module■ COTS (Commercial off-the-shelf) 16 channel ANTARIS 4 positioning engine GPS module

Specifications KAMIO-BT01• Compliant with Bluetooth specification v�.�• Profile: support Head-set, Hand-free, A2DP, and SPP• Up to � Mbps data transfer rate and �0M transfer distance• Chipset: APM8682• OS support: Windows® CE 5.0• Interface: UART• Antenna: IPEX type and Chip antenna• Operating Voltage: 3.3 V• Consumption current: < 100 mA• Operating Temperature: -20°C~70°C• KAMIO Integration supports KAMIO-CB0�A / CB03 / CB04 / CB05

KAMIO-GPS01• �6-channel ANTARIS 4 positioning engine • Supports DGPS, WAAS, EGNOS and MSAS • A-GPS and Autonomous GPS operation, AssistNow™ ready• Chipset: ublox LEA-4S• OS suppport: Windows® CE 5.0• Interface: UART• Antenna: IPEX type• Operating Voltage: 3.3 V• Consumption current: < 150 mA• Operating Temperature: -20°C~70°C• KAMIO Integration supports KAMIO-CB0�A / CB03 / CB04 / CB05


KAMIO-BT0�-R�0 Specification v1.2 Bluetooth module

KAMIO-GPS0�-R�0 �6 channel ANTARIS 4 positioning engine GPS module


KAMIO-BT0�

� x KAMIO-BT0� module card� x Connection cable� x User manual� x Utility CD includes demo AP and SDK

KAMIO-GPS0�

� x KAMIO-GPS0� module card� x Connection cable� x User manual� x Utility CD includes demo AP and SDK

Packing List


KAMIO-BT01 KAMIO-GPS01

UART I/F GPS processor IPEX type connector for antenna

KAMIO-GPS0�

IPEX type connector for AntennaBluetooth processor

UART I/FAudio / Mic connectorKAMIO-BT0�

K A M I O - B T 0 1 - V 1 0



3IBX Series POS PC


5Video Capture Card

6KAMIO RISC

7IOVU Open HMI


9DINO BLADE


11Embedded System


13Power Supply

6-�0


14Peripherals

• HF reader module support ISO-�5693 for Vicinity card applications • RF data rate: 6.62kbps for ISO-15693• Interface: UART or USB• Serial communication to main system speed up to ��5.�Kbps• OS support: Windows CE 5.0• Operating distance: 10 cm• RF frequency: 13.56 MHz• Antenna: IPEX type• Operating Voltage: 5 V• Consumption current: < 150 mA• Operating Temperature: 0°C~60°C• KAMIO Integration supports KAMIO-CB0�A / CB03 / CB04 / CB05

424

50

11

22 55.5

21.34 12.7

21.2

1

49.9

1

Antenna J-TAK

USB / RS�3� Interface

Buzzer IPEX type connect

IRFR-100 / KAMIO-VGA01■ COTS (Commercial off-the-shelf) LCD TTL interface to analog VGA output converter module■ COTS (Commercial off-the-shelf) 13.56 MHz industrial RFID reader module (IRFR) with support for ISO-15693

Specifications KAMIO-VGA01• LCD TTL interface to analog VGA output converter module• Operating Voltage: 3.3 V• Operating Temperature: 0°C~70°C• Connector type: TTL 40 pin interface• Consumption current: < 100 mA• High Speed DAC: ADV 7123• KAMIO Integration supports KAMIO series carry boards


IRFR-�00-R�0 13.56 MHz industrial RFID reader module (IRFR) with support for ISO-15693

KAMIO-VGA0�-R�0 LCD converter module TTL interface to analog VGA


IRFR-�00

� x IRFR-�00 1 x USB / RS-232 Y cable� x IPEX type antenna module� x User manual� x Utility CD includes SDK,utilities, and technical documentation

KAMIO-VGA � x KAMIO-VGA0� module card� x LCD cable for TTL interface

Packing List


KAMIO-VGA01

VGA Interface

KAMIO-VGA0�

TTL LCD Interface

IRFR-100

I R F R - 1 0 0 - V 1 0

kamio risc-based platform - q-products · application server platform 2 single board computer 3 ibx...

Documents