kapi tele

05.2

003

Christian Dalloz Holding Deutschland GmbH & Co. KG, D-95015 Hof, P.O.Box 16 46, Phone +49/92 81/83 02-0, Fax +49/92 81/36 26, [email protected]

Technical specifications are subject to change without notice.

E 1

Safety in Action Fall Protection Systems

Sll COMFORT type fall arresterAccording to EN 353 Teil 1. With new energyabsorbing element. Self-closing carabinerhook with double-locking mechanism forcomplete safety. Climbing is possible withand without leaning back. For vertical andhorizontal use in all Sll-Height Access Fallprotection systems. Body made of aluminium,catch clamp made of stainless steel.

Weight: 0,9 kg/eachPart No.: 22697

Personal Protective EquipmentFall Arresters

Sll COMFORT UK type fall arresterAccording to EN 353 Teil 1. With new energyabsorbing element. Self-closing carabinerwith double-locking mechanism for completesafety. Supertape webbing extensiondesigned for cutting in the event of a rescue.Climbing is possible with and without leaningback. For vertical and horizontal use in allSll-Height Access Fall protection systems.Body made of aluminium, catch clamp madeof stainless steel.

Weight: 0,9 kg/eachPart No.: 23109

Exchange Program:When you give back your old SLL fallarrester (SIMPLEX, STANDARD, COMPACToder UNIVERSAL no matter if it still worksor not -) while buying a new COMFORT, youget 39,00 Euro net discount on your purchase.You safe the next revision of your fall arresterand buy a new COMFORT!

05.2

003



E 2


Personal Protective EquipmentSGU 1 Full Body Harness tested in accordance with EN 361 and EN 358

An up-market harness with a back D-ring in shoulder region, two lateral adjustable positioning D-rings andergonomically shaped back padding. By adjusting the lateral positioning D-ringsthe respective load when using thepositioning function can be set individually to the user's wishes. This means that even when working longer periodsin the harness, no signs of fatigue occur.

The SGU 1 can also be used in conjunction with guided type fall arresters (sliding type fall arresters on a rigidanchorage line) in accordance with EN 353-1.

The full body harness can also be delivered with additional shoulder padding.

Areas of Application:

Climbing Fall arresting Work positioning Descending Rescuing Working

Technical data:

Fall arrester D-ringin hip/waistlevel

Back D-ring in shoulder region 2 lateral adjustable positioning

D-rings Additional shoulder padding

(on request) Widened, ergonomically

shaped back support Tool bag holders 45 mm webbing

05.2

003



E 3


Personal Protective EquipmentSGU 2 Full Body Harness tested in accordance with EN 361 and EN 358

The harness can be adjusted to fit the respective body size and is simple to put on. The SGU 2 is a universalstandard harness which can be used for simple work tasks which carry this risk of a fall from a height e.g.structural steel work, roofing, carpentry as well as sewage channel work.

Because of the many possible ways of adjusting the harness, optimum fit can be obtained for any body size.

In addition, the SGU 2 can also be used in conjunction with the fall arrester D-ring for climbing towers etc. bymeans of the travelling fall arrester on a rigid anchorage line in accordance with EN 353-1.


Climbing Fall arresting Work Positioning Rescuing Working

Technical Data:

Guided type fall arrester D-ring in hip/waist level

Back D-ring in shoulder region 2 lateral positioning D-rings Widened back section 45 mm webbing

SGU 2Weight: 1,4 kgPart No.: 15253

05.2

003



E 4


Personal Protective EquipmentSGU 3 Full Body Harness tested in accordance with EN 361

Thanks to its frontal arrest, descending and rescue D-ring, this harness is particularly suited for persons having to carryequipment on their back, as well as for work that has to be performed in the direction of the anchorage point.

This harness is not to be used for sliding type fall arresters on a rigid anchorage line (EN 353/1).

Anwendungsgebiete:

Fall arresting Descending Rescuing Working

Technical data:

Back D-ring in the shoulderregion

Arrest, descending andrescue D-rings at chest level

webbing 45 mm

SGU 3Weight: 1,2 kgPart-No.: 15254

05.2

003



E 5


Personal Protective EquipmentTelGu Full Body Harness tested in accordance with EN 361 and EN 358

This safety harness offers high user comfort even during extended work periods. Thanks to its frontal fall arrest D-ringit is suitable for use in EN 353-1 fall arrest systems. In case of a fall accident the user maintains an almost verticalposition and the loads from the webbings are well distributed between buttock and back. During rescue operations theperson can be lowered and secured over a chest located D-ring approved for fall arrest, descent and rescueapplications.


Climbing Fall arresting Work positioning Descending Rescuing Working Technical data:

Fall arrester D-ringin hip/waistlevel

Back D-ring in shoulder region 2 lateral positioning D-rings Arrest, descending and

rescue D-rings at chest level Additional shoulder-/tigh pads

o request Extra wide and padded lower

back support 45 mm webbing

Size 0 Size 1 Size 2Waist girth: 550 up to 800 mm Waist girth: 800 up to 1.100 mm

Waist girth: 1.100 up to 1.400 mm Body size: 1.450 up to 1.650 mm Body size: 1.650 up to 1.850 mmBody size: 1.850 up to 1.950 mm Leg circumference: 450 up to 575 mm Leg circumference: 500 up to 650 mmLeg circumference: 650 up to 750 mm Back part: 600 mm Back part: 700 mmBack part: 800 mm

TelGu 1 TelGu 1TelGu 1 Weight: 1,4 kg Weight: 1,4 kgWeight: 1,4 kg Part-No.: 19682 Part-No.: 19683Part-No.: 20631

05.2

003



E 6


Personal Protective EquipmentSliding type Fall Arrester on a Flexible Anchorage Line

Typ MSK S 16 Climbing Fall arrestingThe travelling fall arrester typeMSK S 16 may only be fitted tothe rope by the factory. It is notpermitted to remove it from thesame.

Technical Data: Stainless steel Automatic travel Self-deploying arrest in case

of a fall

Weight: 1,0 kg per 1 piecewithout rope

05.2

003



E 7


Personal Protective EquipmentSliding type Fall Arrester on a Flexible Anchorage Line

Typ MX 2 Climbing Fall arrestingTechnical data: Stainless steel Adjustable: automatic travel/

clamped Can be removed from rope by

opening Polyamide connecting strap

(0,5 m) with carabiner hock Only suitable for use with 16

mm Sll-polyamide-safetyrope

Weight: 1,0 kgPart-No.: 15263

Please note that these guide ropes may only be used in combination with our MX 2 sliding arrester unit.

reverse splice MS 51 MS 90

05.2

003



E 8


Personal Protective EquipmentSafety-Lanyards

Sll - Safety Lanyard, Polyamideaccording to EN 354/355.Shock absorber integrated into the self closing/manually locking aluminium snap hook (FD16). Rope diameter: 16 mm. Comes with selfclosing and self locking snaphook (MS 90).Jar opening: 60 mm.

Rope length: 1500 mmWeight: 0,8 kg/eachPart No. 15276


Sll - Work Positioning Lanyard, Polyamideaccording to EN 358.Comes with rope shortener, self closing andself locking snaphook (MS 51) and ropeprotector. Rope diameter: 16 mm.



Sll - Safety Lanyard, Polyamideaccording to EN 354/355.With integrated webbing shock absorber andself closing/manually locking aluminium snaphook. Rope diameter: 16 mm. Comes withself closing and self locking snaphook (MS90). Jar opening: 60 mm.



05.2

003



E 9


Personal Protective EquipmentKarabiner hooks

Alpine karabiner hook, aluminiumwith screw type locking device.

Length: 116 mmWeight: 87 g/eachOpening: 14 mmPart-No. 19712

05.2

003



E 10


Personal Protective EquipmentAccessories

05.2

003



E 11


Personal Protective EquipmentAccessories

05.2

003



E 12


Descender Device AG 10The descender device AG 10 is one ofthe few certificate descender devicesused for descent height of max. 400 m.Uniform descent velocity of max. 0.7 m/s is automatically controlled by meansof a centrifugal force brake. Descentcan be halted at any time.

Rescue of several persons from greatheights is also possible very quickly bymeans of a shuttle service (left/right-hand descent). The use of anAG 10-Hub-A enables persons to belifted for rescue by means of a hand-operated crank fitted to the descenderdevice.

On request, the descender device AG10 can be fitted with differentsuspension devices. The AG 10 andAG 10 Hub abseiling and rescueequipment is in all other aspectsidentical.

Personal Protective EquipmentDescender device i.a.w. DIN EN 341/DIN EN 1496

05.2

003



E 13


Personal Protective EquipmentDescender device i.a.w. DIN EN 341/DIN EN 1496

05.2

003



E 14


Universal rescue equipment AG 60How is an injured person rescued fromgreat heights if technical assistance isnot available due to inaccessibility? Howis an incurred person transported withonly personal effort from, for instance,a height of 200 m if only one ladder isavailable for the descent?

The AG 60 rescue equipment has formany years provided a successful andproven solution to this and may othersimilar problems. Telecommunicationcompanies have already introduced thisrescue equipment as standardequipment for their employees.

We will be able to assemble anextensive, customer-specificselection of equipment to suit yourindividual requirements.

Personal Protective EquipmentRescue equipment i.a.w. DIN EN 341/DIN EN 1496

We can offer individual training of your employees in our training centre in Hof/Bavaria.

The ind

ividual

parts

of the

set ca

n also

be

ordere

d sepa

rately,

see pri

ce list

for mo

re

informa

tion!

kapi tele

Documents

body harness

fall arresterand

guided type fall arresters

new comfort

market harness

universalstandard harness

shoulder region

christian dalloz