KASTOspeed: High-Performance Automatic Circular SawingMachines for Economical Cutting of Large Batches of Steeland Non-Ferrous Metals.

High-Performance at a Rapid PaceFully Automatic Circular Saws, KASTOspeed Series

Experts count on KASTOs competence. Metal impact plants, forgeshops, manufacturers of fittings and electrical parts, steel servicecenters and almost every automotive supplier use the services ofKASTOspeed when cutting sections of steel and non-ferrous metals.These automatic circular saws satisfy because of minimal cycle timesand they produce millions of accurate cut-off pieces during two orthree-shift operations per year. Thanks to their high reliability andprecision in continuous operation, the KASTOspeed automatic circularsaws are worldwide one of the top-selling, mass-cutting circular sawsof their kind.

KASTOspeed 9: for materialcross-sections up to90 mm (312).

Large-scale production in continuous operation is accomplished bythe KASTOspeed 9 when producing cut-off pieces of steel andnon-ferrous metals with a material cross-section up to a diameterof 90 mm (3). According to the chips produced by the cuttingaction of the material and the product requirements, HSS solid steelor carbide one-way saw blades with appropriate cutting speeds areused. The optimal position of the saw carriage and the four-pointmaterial clamping device enable shortest cutting paths. For thehandling of bars and cut-off pieces, different possibilities are offered.The saws can be interlinked to storage systems and machiningcenters.

KASTOspeed C 9 with tilting table for cut-off pieces up to1000 mm (40) and a container for trim cuts and remnant ends

KASTOspeed: Fast and precisecutting of large batches.

3Technical Data KASTOspeed C 9 KASTOspeed M 9

Material Steel Non-ferrous

Saw blade type Carbide tipped Carbide tipped/HSS

Saw blade diameter mm / in 250/285/315 / 10/1114/1212 250-315/250-350 / 10-1212/10-1334

Cutting width (blade kerf) mm / in 2.0/2.0/2.5 / .078/.078/.098 up to 3.5 / up to .138

Cutting range

Round mm / in 15-90 / 58-312 15-90 / 58-312

Square mm / in 15-80 / 58-318 15-80 / 58-318Rectangular (H x W) mm / in 15x15-85x80 / 58x58-338x318 15x15-120x75 / 58x58-434x3

Min. remnant end mm / in 55 / 2316 55 / 2316

Dimensions and weight(Basic machine up to 300 mm (12)

cut-off length, without infeed equipment)

Length mm / in 1600 / 63 1600 / 63

Width mm / in 1950 / 77 1950 / 77

Height mm / in 2150 / 85 2150 / 85

Weight Kg / lbs 2300 / 5000 2300 / 5000

Performance characteristics

Total power requirement of machinein basic configuration kW / HP 12 / 16 25 / 34

Cutting speed m/min / ft/min 16-225 / 50-740 sfpm 850-3900 / 2800-12800 sfpm

Saw blade feed rate, infinitely adjustable mm/min / in/min approx. 50-2000 / 2-80 approx. 125-7500 / 5-300

Rapid return of saw blade feed mm/min / in/min approx. 8500 / 335 approx. 10000 / 395

Rapid return of bar pusher carriage m/min / ft/min 120 / 395 120 / 395

Workpiece clamping force N / lbs 2000-10000 / 450-2250 lbs 2000-10000 / 450 2250 lbs

(Other cutting speed ranges and saw blade drive motors upon request)

Siemens operators interface panel with input via touch screenInclined magazine with loading discs and infeed roller conveyor

Bar pusher carriage with linear guide system andmaterial guide rail

Operational range with adjustable saw blade guide (patented),measuring stop and outfeed conveyor for cut-off pieces(optional accessory)

KASTO Technology: Powerfulsolutions for high profitability.

KASTOspeed sawing machines for large batches set the patternfor mass cutting of steel, aluminum, brass, and copper. Solid highspeed steel (HSS) and carbide-tipped saw blades are used accord-ing to the application. This guarantees highest chip productionbecause of the rugged machine construction. Further advantagesof the KASTOspeed: short cycle times due to the fast bar pushercarriage as well as the hydraulically cushioned length gauge.

KASTOspeed 15: For materialcross-sections up to 150 mm(612).

KASTOspeed 15 automatic circular saws fulfill the highest require-ments in power and efficiency when cutting steel with tensilestrengths up to approx. 1.400 N/mm (200,000 psi) also high-alloyed steel using one-way carbide saw blades and HSS solid sawblades. The model M15 is used for cutting non-ferrous metals withHSS or carbide tipped saw blades. The solid machine constructionwith its helical high-performance saw carriage gearing in combina-tion with a hydraulically cushioned length gauge and a fast posi-tioning bar pushing carriage guarantees highest production per-formance for precise cut-off pieces. Additionally to the standardequipment, extensive customer-oriented peripheral solutions areavailable for the efficient processing of your cutting requirements.For easy and clear input of cutting jobs a user-friendly programma-ble controller with operator interface panel is integrated.

Trouble-Free in Continuous Multiple Shift Operation:KASTOspeed Circular Sawing Machine

5Technical Data KASTOspeed C 15 KASTOspeed M 15

Material Steel Non-ferrous

Saw blade type Carbide tipped Carbide tipped/HSS

Saw blade diameter mm / in 360/425/460 / 14/1634/18 360/425/460 / 14/1634/18

Cutting width (blade kerf) mm / in 2.6/2.7 / .102/.106 2.6/2.7/3.0-3.6 / .102/.106/.118-142

Cutting range

Round mm / in 20-153 / 34-6 20-153 / 34-6

Square mm / in 20-135 / 34-514 20-135 / 34-514

Rectangular (H x W) mm / in 20x20-155x135 / 34x34-6x5 20x20-155x135 / 34x34-6x5

Min. remnant end mm / in 70 / 234 70 / 234

Dimensions and weight(Basic machine up to 300 mm (12) cut-off

length, without infeed equipment)

Length mm / in approx. 1700 / 67 approx. 1700 / 67

Width mm / in approx. 2500 / 98 approx. 2500 / 98

Height mm / in approx. 2050 / 81 approx. 2050 / 81

Weight kg / /lbs 2600 / 5700 2600 / 5700

Performance characteristics

Total power requirement of machinein basic configuration kW /HP 27 / 36 HP 40 / 54 HP

Cutting speed m/min / in/min 20-160 / 65-525 sfpm 900-4000 / 3000-13000 sfpm

Saw blade feed rate, infinitely adjustable mm/min 25-1100 / 1-43 150-5000 / 6-200

Rapid return of saw blade feed mm/min ca. 10000 / 390 ca. 10000 / 390

(Other cutting speed ranges and saw blade drive motors upon request)

Manually adjustable length gauge, e.g. with 1000 mm (40)cut-off length

Saw carriage with saw blade guide for the KASTOspeed C15

NC length gauge for cut-off lengths up to 1000 mm (40)(option), alternatively available for 2000 mm (80) (option)

Flat magazine in combination with a bundle loader (option)

Electrostatic air filter and signal lamp.Sorting gate for remnants, trim cuts and goodparts.Tilting table for long cut-off pieces.

Bundle loader with material inloading position.

Flat magazine for square and special profiles.

KASTOspeed M9 with chip exhaust systemfor aluminum chips.

Equipment Details and Accessories

Outfeed and sorting withoutan operator importantprecondition for an effectivehandling.

Trim cuts and remnants are separated from the good pieces at theoutfeed side. According to the cut-off length and cutting task asorting slide or a tilting table can be offered. More containers forgood cut-off pieces can optionally be positioned in the dischargearea. An even higher grade of automation offers a robot sortingdevice which stacks the parts with different grippers according tothe cutting requirement into customer-provided containers.

For the disposal of chips produced during cutting, sturdy chipconveyors as well as powerful suction units of different designsare available. Electrostatic air filters are also available for reductionof coolant emission fumes.

Chip disposal and environmentalprotection.

In order to store large numbers of bars on the infeed side of themachine, different kinds of magazines are available. Startingwith the inclined magazine on which one layer of material ispre-stored, bundle loader on which one bundle is singled fullyautomatically, or flat magazine for square and special profilesas well as for surface-sensitive materials, different accessoriesare available for an extended operation with limited operatorinvolvement. With the direct supply out of a KASTO storagesystem, several material bundles can be processed fully auto-matically one after the other.

Material infeed adapted to thecutting task.

7Sorting device with several containerlocations for cut-off pieces

Removal and sorting of small partsby a robot

Outfeed conveyor for cut-off pieces withpusher device (discharge to the left)

Tilting table with trough-type transferdevice and remnant end container

Removal of cut-off pieces with an especiallydesigned vacuum gripper

Sorting and counting device forcut-off pieces

Qualified Advice, Reliable Service:Success Factors for a Long-Term, Efficient Installation.

Competent advice is available at the beginning to assure a successfulapplication of KASTOspeed circular sawing machines and is based onextensive technology, cutting trials, and long-term experience in alldifferent kinds of applications. For this reason other functions such asmaterial infeed, material supply out of storage systems, and fully auto-matic sorting and stacking of cut-off pieces by robot are used. Long-term advantage also with later adaptations and supplements is themachine control developed by KASTO operating with establishedindustrial hardware.

The competence for solutionsdoes not end with the sawingmachine.

Training towards the success of our customers installation is acompany policy of KASTO. Therefore service is an important partof a long-term partnership for a durable efficiency and reliability ofKASTO products. Often a problem can be solved by the machineoperators after an advisory service by phone. Supply and shipmentof spare parts is normally carried out the same day of the malfunc-tion notice. Competent help on site, when required, is performedby especially trained service technicians.

Satisfied customers are nocoincidence.

0288

0660

/08.

08/2

k/K

on

kord

ia.W

ere

serv

eth

eri

gh

tto

mak

ete

chn

ical

chan

ges

.

KASTOMaschinenbau GmbH & Co. KGIndustriestr. 1477855 Achern/DeutschlandTelefon +49 7841 61-0Telefax +49 7841 61-355E-Mail kasto@kasto.deInternet http://www.kasto.de

The Complete KASTO Program:Economic Sawing and Storing of Metal

Expertise rightdown the line

For over 160 years, KASTO has been recognized for quality and innova-tion, and offers a complete range of metal cutting saws, as well as sto-rage and retrieval systems. Thanks to an ongoing development of newtechnologies and constant optimization process of machine concepts,KASTO has achieved the status of market leader in sawing and storingof metals.

From the basic hacksaw to the high-performance automatic bandsaw capable of economicallyprocessing bar stock, blocks or plates of all grades, KASTO has the best solution for everychallenge: Universal bandsaws and circular saws for light and medium applications, hacksawsemploying the pushing-arching-cutting motion originated by KASTO, and production bandsaws andcircular saws designed to cut medium to difficult materials.

Rapid access, optimum space utilization, clear and accurate view of stored inventoryKASTOstorage systems excelling features. And theres more! Fully automatic sawing centers, cantileverbar and sheet metal storage systems or cassette storage and commissioning systems, combinedsawing and storage systems with integrated inventory control computers. As a one-source supplier,KASTO delivers the complete system, both hardware and software.

KASTOs comprehensive service program includes everything: from commissioning and training tomaintenance support, service contracts, readily available spare parts and on-site service. KASTOsservice incorporates individual consulting and immediate support with well-qualified teleservice.And of course, KASTO service is available worldwide.

KASTOsSawing Machines

KASTOsStorage Systems

KASTOsService

Your KASTO Partner