kat listy 11 1.qxd · 2009-10-08 ·...
TRANSCRIPT
Control panel
Grinding mechanism
High capacity and top quality of shaving
Approved reliability
High technical equipment• computers Moeler• eletris Schleicher• knifes Heusch• hydraulics Rexroth
070017/P1Hydraulic Shaving machine
HADRAULIC SHAVING MACHINE
You reseller:
STROJOSVIT a.s. Vrchlického 22 794 01 Krnov CZECH REPUBLIC PHONE +420 554 691 352 FAX +420 554 611 149 [email protected]
www.strojosvit.com
070017/P1 working width 1800 mm
Above all the leathers from the cattlehides in sides, as well as from the calfskins and nontrimmed split leathers canbe shaved on this machine.The machine enables also shaving of whole leathers in two, or more stripes.
The design concept of the machine enables its universal employment.The rigid design of the machine frame with soliddiagonals and a firm seating of the bladed cylinder on the side parts are basis of a precise operation of the machine.
A dynamically balanced bladed cylinder, placed in the antifriction bearings, can be dismantled easily. (A completebladed cylinder can be used at any machine 070017 P1 without modifications).
A semiautomatic grinding with a fine adjustable size of the abrasive disk feed to the bladed cylinder.The sense of thegrinding disk rotation is variable by means of a rotary switch. During the shaving operation the abrasive disk isseparated automatically from the bladed cylinder, and the grinding is interrupted. The speed of the leather feed intothe machine can be regulated stepbystep until 0,42 m/s.
A reverse run of the laying roller enables a withdrawal of leather. A shaving thickness is set by means of an electricmotor either on a stepbystep basis, or in short preselected sections.There is a possibility of following the changes ofthe working gap on a numerical indicator.
The laying roller is set in a uniform bevel, or obliquely to the bladed cylinder.
The drawing aside equipment prevents leathers from clinging to the bladed cylinder. Its position with regard to thebladed cylinder is set automatically during the machine operation.
Main parameters
Working Width mm 1800
Operators 1
Total input kW 51
Main dimensions mm width 3 990 x depth1 650
heigth = 1 850
Mass nett/gross kg 6 500
The values and the machine description, stated in the folder, are precised in a detailed offer.1 leather
2 bladed roller
3 supporting roller
4 rubber coated feeding roller
5 grinding wheel
6 removing (pick off) device
7 supporting table