katalog 1600englischoktober2014 - protec-praezision.de · 16 2 specifications and information...
TRANSCRIPT
16 1
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
16 | STRAIGHT EDGES ACC. TO DIN 874, PRECISIONS RULES ACC. DIN 866 A+B
16 1
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1601-
1605
PRECISION STEEL STRAIGHT EDGES
1610
1611
ALUMINUM PRECISION STEEL STRAIGHT EDGES
16XX STRAIGHT EDGES 1614-
1617
ALUMINUM STRAIGHT EDGES
1612
1660
FACET RULES 1652
1682
PRECISION STEEL WORKSHOP RULES
1653
1684
PRECISION STEEL WORKSHOP RULES
1651 CONTROL RULES
1657 THIN RULES 1640-
1645
THIN RULES
16 2
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1675 „PIMETER“ CIRCUMFERENCE 1678 ROLL GAUGE WITH STELL DISC
16 3
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1600 - 1605 PRECCISION STEEL STRAIGHT & EDGES NON HARDENED
Execution: Precision-model, edges and flat sides most accurately worked.
length mm
cross-section mm
kg
article-no. article-no.
mild steel stainless steel
acc. to DIN 874/0, from 2000 mm I-formed with slots
500 50 x 10 1,65 1600.0500 1601.0500
750 50 x 10 3,2 1600.0750 1601.0750
1000 60 x 12 5,6 1600.1000 1601.1000
1500 70 x 15 11,4 1600.1500 1601.1500
2000 80 x 15 18,8 1600.2000 1601.2000
2500 100 x 16 28,0 1600.2500 1601.2500
3000 120 x 18 44,0 1600.3000 1601.3000
4000 140 x 20 78,0 1600.4000 1601.4000
5000 140 x 20 90,0 1600.5000 1601.5000
6000 160 x 24 150,0 1600.6000 1601.6000
acc. to DIN 874/I, from 2000 mm I-formde with slots
500 40 x 8 1,4 1602.0500 1603.0500
750 50 x 10 3,0 1602.0750 1603.0750
1000 50 x 10 4,7 1602.1000 1603.1000
1500 60 x 12 8,4 1602.1500 1603.1500
2000 70 x 15 15,0 1602.2000 1603.2000
2500 80 x 15 23,5 1602.2500 1603.2500
3000 100 x 16 31,5 1602.3000 1603.3000
4000 120 x 18 60,0 1602.4000 1603.4000
5000 140 x 20 90,0 1602.5000 1603.5000
6000 140 x 20 115,0 1602.6000 1603.6000
acc. to. DIN 874/II, from 4000 mm I-formed, with slots
500 30 x 6 1,6 1604.0500 1605.0500
750 40 x 8 1,8 1604.0750 1605.0750
1000 40 x 8 2,8 1604.1000 1605.1000
1500 50 x 10 6,0 1604.1500 1605.1500
2000 60 x 12 11,0 1604.2000 1605.2000
2500 70 x 14 19,0 1604.2500 1605.2500
3000 80 x 15 28,2 1604.3000 1605.3000
4000 100 x 16 44,0 1604.4000 1605.4000
5000 120 x 18 68,5 1604.5000 1605.5000
16 4
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1607 - 1609 ALUMINIUM PRECCISION STEEL STRAIGHT & EDGES
Execution: Precision-model, edges and flat sides most accurately worked, extra light.
length mm
cross-section mm
kg
article-no.
acc. to DIN 874/0, from 2000 mm I-formed with slots
500 60 x 12 0,7 1607.0500
1000 60 x 12 1,4 1607.1000
1500 100 x 15 4,3 1607.1500
2000 100 x 15 5,9 1607.2000
2500 100 x 15 7,5 1607.2500
3000 150 x 20 15,9 1607.3000
4000 150 x 20 21,3 1607.4000
5000 150 x 20 26,7 1607.5000
acc. to DIN 874/I, from 2000 mm I-formde with slots
500 60 x 12 0,7 1608.0500
1000 60 x 12 1,4 1608.1000
1500 100 x 15 4,3 1608.1500
2000 100 x 15 5,9 1608.2000
2500 100 x 15 7,5 1608.2500
3000 150 x 20 15,9 1608.3000
4000 150 x 20 21,3 1608.4000
5000 150 x 20 26,7 1608.5000
6000 150 x 20 32,1 1608.6000
acc. to. DIN 874/II, from 4000 mm I-formed, with slots
500 60 x 12 0,7 1606.0500
1000 60 x 12 1,4 1606.1000
1500 100 x 15 4,3 1606.1500
2000 100 x 15 5,9 1606.2000
2500 100 x 15 7,5 1606.2500
3000 150 x 20 15,9 1606.3000
4000 150 x 20 21,3 1606.4000
5000 150 x 20 26,7 1606.5000
6000 150 x 20 32,1 1606.6000
16 5
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
16** STEEL STRAIGHT EDGES
Execution: in I-formed section, material DIN 1025, weight by reducing holes, with flat sides for resting spirit levels, calibration-certificate include
length mm
Cross-section mm
kg
article-no. DIN874/0
article-no DIN874/I
Cross-section mm
kg
article-no. DIN874/0
article-no. DIN874/I
500 80 x 40 1611.0500 1621.0500 100 x 300 1620.0500 1610.0500
750 80 x 40 1611.0750 1621.0750 100 x 300 1620.1000 1610.0750
1000 160 x 50 12,5 1611.1000 1621.1000 100 x 30 5,0 1620.1000 1610.1000
1500 160 x 50 19,0 1611.1500 1621.1500 100 x 40 9,5 1620.1500 1610.1500
2000 160 x 50 25,0 1611.2000 1621.2000 120 x 40 16,0 1620.2000 1610.2000
2500 160 x 50 32,0 1611.2500 1621.2500 120 x 40 21,0 1620.2500 1610.2500
3000 180 x 60 45,0 1611.3000 1621.3000 140 x 40 34,0 1620.3000 1610.3000
4000 180 x 60 59,0 1611.4000 1621.4000 140 x 40 48,0 1620.4000 1610.4000
5000 200 x 80 100,0 1611.5000 1621.5000 140 x 40 60,0 1620.5000 1610.5000
6000 200 x 80 120,0 1611.6000 1621.6000 160 x 40 75,0 1620.6000 1610.6000
16** ALUMINIUM STEEL STRAIGHT EDGES
Execution: in I-formed section, material DIN 1025, weight by reducing holes, with flat sides for resting spirit levels, calibration-certificate include, extra light.
length mm
Cross-section mm
kg
article-no. DIN874/0
article-no DIN874/I
Cross-section mm
kg
article-no. DIN874/0
article-no. DIN874/I
500 100 x 40 1,65 1614.0500 1615.0500
1000 100 x 40 3,31 1614.1000 1615.1000 160 x 50 5 1616.1000 1617.1000
1500 100 x 40 4,97 1614.1500 1615.1500 160 x 50 7,4 1616.1500 1617.1500
2000 100 x 40 6,62 1614.2000 1615.2000 160 x 50 9,8 1616.2000 1617.2000
2500 100 x40 8,28 1614.2500 1615.2500 160 x 50 12,2 1616.2500 1617.2500
3000 100 x 40 9,93 1614.3000 1615.3000 160 x 50 14,6 1616.3000 1617.3000
4000 160 x 50 19,5 1616.4000 1617.4000
5000 160 x 50 1617.5000
6000 160 x 50 1617.6000
16 6
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1612
1660
FACET RULES
Mild steel, graduation according to DIN 866/B.
Length mm
Cross-Section mm
kg
article-no. article-no.
without graduation with gradution
500 40 x 5 0,75 1612.0500 1660.0500
1000 40 x 5 1,5 1612.1000 1660.1000
1500 40 x 5 2,5 1612.1500 1660.1500
2000 40 x 5 3,5 1612.2000 1660.2000
3000 40 x 5 5,6 1612.3000 1660.3000
Stainless Facet Rules deliverable on request!
1652
1682
PRECISION STEEL WORKSHOP RULES
DIN 866/A on both sides 5 mm protection-space, thickness of grad.-line 70 to 100µm, accuracy per meter ± 0,04 mm.
length mm
cross-section mm
kg
article-no.
article-no.
mild steel stainless steel
500 30 x 6 0,75 1652.0500 1682.0500
1000 40 x 8 2,8 1652.1000 1682.1000
1500 40 x 8 4,7 1652.1500 1682.1500
2000 50 x 10 8,0 1652.2000 1682.2000
3000 50 x 10 14,0 1652.3000 1682.3000
4000 60 x 12 25,0 1652.4000 1682.4000
5000 70 x 14 39,0 1652.5000 1682.5000
16 7
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1653
1684
CONTROL RULES
DIN 866/B with 10 mm protection-space right, thickness of grad.-line 100 to 150µm, accuracy per meter ± 0,10 mm
length mm
cross-section mm
kg
artcile-no.
article-no.
mild steel stainless steel
500 25 x 5 0,5 1653.0500 1684.0500
750 30 x 6 1653.0750 1684.0750
1000 30 x 6 1,5 1653.1000 1684.1000
1500 30 x 6 3,5 1653.1500 1684.1500
2000 40 x 8 5,2 1653.2000 1684.2000
2500 40 x 8 1653.2500 1684.2500
3000 40 x 8 8,2 1653.3000 1684.3000
4000 50 x 10 12,0 1653.4000 1684.4000
5000 60 x 12 28,0 1653.5000 1684.5000
1651 CONTROL RULES
DIN 865, reading parts satin chromed, on both sides 10 mm protection-space, thickness of grad.-line 20 to 40µm, accuracy per meter ± 0,02 mm
length mm
cross-section mm
kg
article-no.
500 15 x 15 2,0 1651.0500
1000 20 x 20 3,0 1651.1000
1500 20 x 20 7,0 1651.1500
2000 25 x 25 10,0 1651.2000
16 8
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1657 THIN RULES
DIN 866/B, with laser graduation, stainless
length mm
cross-section mm
kg
article-no.
500 30 x 2 0,25 1657.0500
1000 30 x 2 0,48 1657.1000
1500 30 x 2 0,72 1657.1500
2000 30 x 2 0,95 1657.2000
3000 30 x 2 1,20 1657.3000
16 9
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1640-
1645
FLEXIBLE MAßSTÄBE
Stainless spring band steel, graduation satin chromed graduation, EC-Klasse II etched
length mm
cross-section mm
article-no. mm / mm
article-no. ½ mm / mm
article-no. mm / mm
article-no. ½ mm / mm
Reading from left to right Reading from right to left
100 13 x 0,5 1640.0100 1641.0100 1642.0100 1643.0100
150 13 x 0,5 1640.0150 1641.0150 1642.0150 1643.0150
200 13 x 0,5 1640.0200 1641.0200 1642.0200 1643.0200
250 13 x 0,5 1640.0250 1641.0250 1642.0250 1643.0250
300 13 x 0,5 1640.0300 1641.0300 1642.0300 1643.0300
150 18 x 0,5 1644.0150 1645.0150 1646.0150 1646.0150
300 18 x 0,5 1644.0300 1645.0300 1646.0300 1646.0300
500 18 x 0,5 1644.0500 1645.0500 1646.0500 1646.0500
1000 18 x 0,5 1644.1000 1645.1000 1646.1000 1646.1000
1500 18 x 0,5 1644.1500 1645.1500 1646.1500 1646.1500
2000 18 x 0,5 1644.2000 1645.2000 1646.2000 1646.2000
3000 18 x 0,5 1644.3000 1645.3000 1646.3000 1646.3000
16 10
Specifications and information appearing in any catalog or flyer are current at the time of printing but are subject to change without notice.
1675 „PIMIETER“ CIRCUMFERENCE
With vernier 1/10 mm and “Pi-graduation”, mild steel, stainless-model deliverable on request!
Cirumference mm
cross-section Ø mm
kg
reading article-no.
60 – 950 20 – 300 0,05 0,1 1675.0300
940 – 2200 300 – 700 0,08 0,1 1675.0700
2190 – 3460 700 – 1100 0,11 0,1 1675.1100
3450 – 4720 1100 – 1500 0,17 0,1 1675.1500
4710 – 5980 1500 – 1900 0,19 0,1 1675.1900
5960 – 7230 1900 – 2300 0,20 0,1 1675.2300
7220 – 8500 2300 – 2700 0,1 1675.2700
8480 – 9760 2700 – 3100 0,1 1675.3100
9730 – 11010 3100 – 3500 0,1 1675.3500
11000 – 12260 3500 – 3900 0,1 1675.3900
12250 – 13500 3900 – 4300 0,1 1675.4300
13500 – 14760 4300 – 4700 0,1 1675.4700
14760 – 16020 4700 – 5100 0,1 1675.5100
16020 – 17270 5100 – 5500 0,1 1675.5500
17270 – 18520 5500 – 5900 0,1 1675.5900
18350 – 19780 5900 – 6300 0,1 1675.6300
1678 ROLL GAUGE WITH STEEL DISC
With mm-graduation on both sides, 500 mm circumference graduation.
Execution kg order-no.
with wooden handle 1,10 1678.0500