katalog produktÓw general catalogue · el112 112 x 62 180 x 95 23 2,5 el102 102 x 62 180 x 85 21...

KATALOG PRODUKTÓW GENERAL CATALOGUE

3

Armetal was established in 1960 in Rocca San Casciano,just 30 km from Forlì. Since then, the company has developed

and grown constantly thanks to the commitment and passion for work of two generations of the Pazzi family who turned it into a market-leading manufacturer of convertible mechanisms for the

sofa-bed and bed frame industry.

Today the company extends over 40,000 sqm, including a 14,000 sqm indoor area, where the entire production process is carried out, from the concept to the finished product, thanks to

its great experience and cutting-edge equipment.

In 2007 Armetal founded Armetalflex, a firm manufacturing mattresses to be combined with its mechanisms, offering its customers a wide range, both in the spring type and in the polyurethane foam one to guarantee an even better service.

The secret of Armetal’s success is understanding both the market and customers’ requirements to provide an efficient, high quality and competitive service, offering top rate products with

the support and availability of a highly trained staff.

54

Workbench drillingThis drilling machine makes high precision holes simultaneously on the perimeter tubular

sections of the mechanisms.

PaintingA 1,500 sqm surface houses: the phosphate degreasing tunnel, the drying kiln and a modern computerised

painting booth where epoxy powder is released by 14 numerical control dispensers that guarantee an even

painting on every part of the mechanism.

DeliveriesArmetal delivers most of its products directly through its own trucks and highly qualified personnel.

Armetal relies on international couriers for deliveries abroad.

Cutting State-of-the-art, numerical control, cutting-off machines guarantee a steady millimetre accuracy to all

metal tubular components.

MouldingOnly first-rate metal sheets, with the maximum tolerance of a tenth of a millimetre, are used.

They are worked in mechanical presses using, for each component, special “step” moulds fed by

centesimal accuracy numerical control unwinding and straightening devices.

WeldingComputerised robots work in a more than 200 sqm welding station, on special workbenches, performing

high precision welding operations.

76

Introduction

Eolo - 180 (slat bed frame)

Eolo - 180 (electro-welded bed frame)

Eolo mattresses

Scirocco – 190

Scirocco mattresses

Euro – 190

Euro mattresses

Tornado – 190

Tornado - 190 “AIR”

OPENING-CLOSING instructions for Tornado

Tornado / Tornado “AIR” mattresses

Grecale De Luxe - 190 H12


Grecale De Luxe H14 mattresses


Grecale De Luxe WHOLE SLATS

Grecale De Luxe DOUBLE SLATS

OPENING-CLOSING instructions for Grecale

Tifone – 195

Accessories

1-3

7

9

11

13

15

17

19

21

23

24

25

27

29

30-33

35

36

37

39

41

43

CONTENTS

8 9

62

2725

39

185

4/8

22

7/8

slatsCODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG

EL172 172 x 62 180 x 155 32 4,0

EL162 162 x 62 180 x 145 30 3,7

EL152 152 x 62 180 x 135 29 3,4

EL142 142 x 62 180 x 125 28 3,1

EL132 132 x 62 180 x 115 27 2,9

EL122 122 x 62 180 x 105 25 2,7

EL112 112 x 62 180 x 95 23 2,5

EL102 102 x 62 180 x 85 21 2,2

EL 92 92 x 62 180 x 75 19 2,0

EL 82 82 x 62 180 x 65 17 1,7

Standard depth cm 62Depth on request cm 56Distance of the base frame from the ground cm 4 or 8 cm depending on the versionPolyurethane mattress: Height 7/8 cm – Length 180 cm

• Base Cover Rings ø 25 mm• Steel Handle• Ring-shaped Polyester Handle

TECHNICAL SPECIFICATIONS

MATTRESS MODELS

TECHNICAL DRAWING

ACCESSORIES

Steel Handle

Mat

tress

heig

ht

Wid

th

Base Cover Ringsø 25 mm

Space-saving 3-fold fitting mechanism.The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders.The bearing frame includes a metal sheet side with holes designed for fastening it to the box.This mechanism can be combined with a polyurethane foam mattress (7x180 cm).

ACCESSORIES

Eolo 180 polyurethane mattress D. 21, height 7 cm, cover in TnT fabric

Eolo 180 polyurethane mattress D. 25, height 7 cm, Cotton Cover

Eolo 180 polyurethane mattress D. 30, height 8 cm, cover in Quilted Cotton

Ring-shaped Polyester Handle

Eolo - 180

10 11

62

A B

2725 39

185

4/8

822

electro-welded bed frame

Standard depthcm 62Depth on request cm 56Distance of the base frame from the ground cm 4or 8 cm depending on the versionMaterasso in poliuretano H. cm 7/8 Lung. cm 180


TECHNICAL DRAWING

ACCESSORIES

Mat

tress

heig

ht

Steel HandleBase Cover RingsØ 25mm

Space-saving 3-fold fitting mechanism.The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders.The bearing frame includes a metal sheet side with holes designed for fastening it to the box.This mechanism can be combined with a polyurethane foam mattress (7x180 cm).

Wid

th

MATTRESS MODELSEolo 180 polyurethane mattress D. 21, height 7 cm, cover in TnT fabric



CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG

EL172 172 x 62 180 x 155 32 4,0

EL162 162 x 62 180 x 145 30 3,7

EL152 152 x 62 180 x 135 29 3,4

EL142 142 x 62 180 x 125 28 3,1

EL132 132 x 62 180 x 115 27 2,9

EL122 122 x 62 180 x 105 25 2,7

EL112 112 x 62 180 x 95 23 2,5

EL102 102 x 62 180 x 85 21 2,2

EL 92 92 x 62 180 x 75 19 2,0

EL 82 82 x 62 180 x 65 17 1,7

• Base Cover Rings ø 25 mm• Steel Handle• Ring-shaped Polyester Handle

ACCESSORIES


Eolo - 180

1312

7

7

8

12

Eolo - 180: MATTRESS

Eolo 180 polyurethane mattress D. 21, height 7 cm, cover in TnT fabric



density 21

density 25

density 30

14 15

43 27

38

30

10

191 10/1

2

82

elastic belts and slatsCODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG

SC182 182 x 82 190 x 160 30 24

SC162 162 x 82 190 x 140 26 22

SC142 142 x 82 190 x 120 23 19

Standard depth cm 82Distance of the base frame from the ground cm 10Polyurethane mattress: Height 10/12 cm – Length 190 cm


MATTRESS MODELS

TECHNICAL DRAWING

ACCESSORIES

ACCESSORIESM

attr

ess

heig

ht

Wid

th• Base Cover Rings Ø 25 mm• Polyester Handle with Hooks


Base Cover RingsØ 25 mm

2-fold fitting mechanism with front opening by lifting.The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders.The bearing frame includes a metal sheet side with holes designed for fastening it to the box.The bed surface is made of wooden slats while the seat is provided with elastic belts.This mechanism can be combined with a polyurethane foam mattress (10/12x190 cm).

Scirocco 190 polyurethane mattress: D. 25, 10 cm high, Cotton Cover

Scirocco 190 polyurethane mattress: D. 30, 10 cm high, cover in Quilted WhiteStretch Fabric

Scirocco 190 polyurethane mattress: D. 30, 12 cm high, cover in Quilted WhiteStretch Fabric

Scirocco - 190

16 17

10

10

12

16

Scirocco - 190: MATTRESS

Scirocco 190 polyurethane mattress: D. 25, 10 cm high, Cotton Cover

Scirocco 190 polyurethane mattress: D. 30, 10 cm high, cover in Quilted White Stretch Fabric

Scirocco 190 polyurethane mattress: D. 30, 12 cm high, cover in Quilted White Stretch Fabric

density 25

density 30

density 30

18 19

27 38

30

5

12/1

4

44

192

2-fold fitting mechanism with front opening by lifting.The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders.The bearing frame includes a metal sheet side with holes designed for fastening it to the box.The bed surface is made of a rectangular electro-welded mesh while the seat is provided with elastic belts.This mechanism can be combined with a spring mattress (14x190 cm) or with a polyurethane foam mattress (13x190 cm).

Euro - 190Electro-welded bed frame and elastic beltsCODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG

ER 182 182 x 76 190 x 160 33 25ER 162 162 x 76 190 x 140 31 22

* ER 152 152 x 76 190 x 130 29 20ER 142 142 x 76 190 x 120 28 19ER 132 132 x 76 190 x 110 27 17

* ER 122 122 x 76 190 x 100 26 15

* ER 112 112 x 76 190 x 9 25 13ER 92 92 x 76 190 x 7 22 10

TECHNICAL DRAWING

Mat

tress

heig

ht

Wid

th

Standard depth cm 76Distance of the base frame from the ground cm 5


ACCESSORIES

ACCESSORIES

MATTRESS MODELSEuro 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton Fabric

Euro 190 polyurethane mattress: D. 30, 13 cm high, cover in Quilted White Stretch Fabric, REMOVABLE COVER

Euro 190 polyurethane mattress: D. 30, 13 cm high, cover in Quilted White Stretch Fabric

Euro 190 spring mattress, cm 14 high, polyurethane and wad-ding, Cotton Cover

Polyester Handle with Hooks

• Base Cover Rings Ø 25 mm• Polyester Handle with Hooks

* this model is produced on request for a minimum order of 50 pieces

Base Cover RingsØ 25 mm

21

13

13

13

14

20

Euro_190: MATTRESS

Euro 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton Fabric

Euro 190 polyurethane mattress: D. 30, 13 cm high, cover in Quilted White Stretch Fabric, REMOVABLE COVER

Euro 190 polyurethane mattress: D. 30, 13 cm high, cover in Quilted White Stretch Fabric

Euro 190 spring mattress, cm 14 high, polyurethane and wadding, Cotton Cover

density 25

density 30

density 30

polyurethane and waddin

22 23

3242

82

8

26

42

194

28

33

5414 14

13/1

4

A

82

B

electro-welded bed frame Tornado - 190CODE WIDTH MATTRESS SIZES MECH. KG MATTR. KG

TR 180 180 x 82 190 x 160 37 24

TR 160 160 x 82 190 x 140 34 22

TR 140 140 x 82 190 x 120 31 20

TR 95 95 x 82 190 x 75 24 14

Depth cm 82Distance of the base frame from the ground cm 8


ACCESSORIES

ACCESSORIES

• Polyester Handle with Hooks• Base Cover Rings da Ø 25/30 mm• Panel Locking Brackets• NEW Armetal bayonets with through-hole

NEW Armetal Bayonetswith through-hole

Panel Locking BracketsBase Cover Ringsda Ø 25/30 mm

Polyester Handle with Hooks

Wid

th

TECHNICAL DRAWING

MATTRESS MODELS

2-fold fitting mechanism with front opening by lifting.The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders.On request, a frame to hold the seat cushions and bayonets already welded to the frame are available, for a quick assembly of armrests and backrest.The bed surface is made of a rectangular electro-welded mesh and the seat is available both in the electro-welded mesh version and with elastic belts.This mechanism can be combined with a spring mattress (14x190 cm) or with a polyurethane foam mattress (13x190 cm).

Tornado 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton

Tornado 190 polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric, WITH REMOVABLE COVER

Tornado 190 polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric

Tornado 190 spring mattress, 14 cm high, polyurethane and wadding, Cotton cover

24 25

82

3242

82

8

26

42

194

28

33

5414 14

13/1

4

Tornado - 190 - “A IR ”

2-fold fitting mechanism with front opening by lifting.The frame consists of highly-resistant ø 25 tubular steel and it is painted with oven-dried epoxy powders.The bearing frame includes a metal sheet side with holes designed for fastening it to the box.The bed surface is made of a rectangular electro-welded mesh while the seat is provided with elastic belts.This model is equipped with a frame that holds the seat cushions.On request, a backrest and a pair of lift mechanisms are available to lift the backrest cushions making bed pull-out easier.This mechanism can be combined with a spring mattress (14x190 cm) or with a polyurethane foam mattress (13x190 cm).

Electro-welded bed frame with liftable backrestthis model is produced on request for a minimum order of 50 piecesDepth cm 82

Distance of the base frame from the ground cm 8


ACCESSORIES

TECHNICAL DRAWING

• Base cover rings• Iron backrest and joining bar• Backrest lift mechanism

Wid

th

Mat

tress

heig

ht

MATTRESS MODELSTornado “AIR” 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton

Tornado 190 “AIR” polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric, WITH REMOVABLE COVER

Tornado “AIR” 190 polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric

Tornado 190 “AIR” spring mattress, 14 cm high, polyurethane and wadding, Cotton cover


TR 180 180 x 82 190 x 160 34 24

TR 160 160 x 82 190 x 140 31 22

TR 140 140 x 82 190 x 120 28 20

TR 95 95 x 82 190 x 75 22 14

27

13

13

13

14

26

Tornado / Tornado “AIR”: MATTRESSInstructions for OPENING Tornado

Instructions for CLOSING Tornado

1 : Seize the handle as shown in detail E, placing your hand in the middle, under the cushions.

4 : In order to close the mechanism, lift it starting from point A and, at the same time, apply pressure on point B until a 180° rotation is completed.

2 : Note: In the models with a cushion-holding frame, firstly lift the cushion surface, as shown in Fig. 2, then grab the handle as shown in detail E. Using the handle, lift the mechanism by about 20 cm, then pull it until the first front foot rests on the ground.

3 : Lift and turn the second front foot F, grabbing it as shown in detail F until it rests on the ground.

5 : Make sure that the front foot F completes a 90° rotation and it placed behind the cushions in point C.Lift the mechanism grabbing the handle found in point E, then apply pressure inwards in the direction shown by the arrows.

6 : In the models with a cushion holding frame, lower the cushions at the end.

Note: Make sure that no quilts and/or cushions are left inside the mechanism

Tornado/Tornado “AIR” 190 polyurethane mattress: D. 25, 13 cm high, cover in Quilted Cotton

Tornado/Tornado 190 “AIR” polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric, WITH REMOVABLE COVER

Tornado/Tornado “AIR” 190 polyurethane mattress: D. 30, 13 cm high, cover in White Quilted Stretch Fabric

Tornado/Tornado 190 “AIR” spring mattress, 14 cm high, polyurethane and wadding, Cotton cover

density 25

density 30

density 30

polyurethane and wadding

28 29

12

195

13

44

190

22 40

74

8 cm

18 50 18

55

92

30

85

47

7

26

194

86

A

Electro-welded bed frame and elastic belts Grecale De Luxe - 190 - H12

Convertible mechanism with front opening performed by rotating of the backrest and then unrolling the frame in a single movement without removing the seat cushions and the backrest.The frame consists of highly-resistant ø 30 tubular steel and it is painted with oven-dried epoxy powders. This model is equipped with already welded bayonets for a quick fitting of armrests and backrest.The bed surface is made of a rectangular electro-welded mesh, suitable for manufacturing sofa beds for daily use, households, hotels and cruise ships. The seat is provided with elastic belts to ensure a better comfort. The backrest is available in the standard and a cushion-holding version.This mechanism can be combined with a polyurethane foam mattress (12x190 cm).The Grecale de Luxe mechanism is CATAS approved (report no. 174414 of 29/04/2014)


GC 180 180 x 86 190 x 160 41 24

GC 160 160 x 86 190 x 140 38 22

GC 140 140 x 86 190 x 120 35 20

GC 92 92 x 86 190 x 75 28 14

Depth cm 86Distance of the base frame from the ground cm 8/10

• Mechanism with welded bayonets• Standard backrest• Cushion-holding backrest and ratchet• Backrest split in two• Panel locking brackets • NEW Armetal bayonets


ACCESSORIES

TECHNICAL DRAWING

MATTRESS MODELSGrecale de Luxe 190 polyurethane mattress: D. 25, 12 cmhigh, cover in Quilted Cotton

Grecale de Luxe 190 polyurethane mattress: D. 30, 13 cm high, cover in quilted White Stretch Fabric, WITH REMOVABLE COVER

Grecale de Luxe 190 polyurethane mattress: D. 30, 12 cm high, cover in quilted White Stretch Fabric

30 31

195

13

44

190

22 40

74

8 cm

18 50 18

55

92

30

85

47

7

26

194

86

rapp. nr. 174414 del 29/04/2014

13/14

• Mechanism with welded bayonets• Standard backrest• Cushion-holding backrest and ratchet• Backrest split in two• Panel locking brackets • NEW Armetal bayonets

Grecale De Luxe - 195 - H14Electro-welded bed frame and elastic belts

Convertible mechanism with front opening performed by rotating of the backrest and then unrolling the base in a single movement without removing the seat cushions and the backrest.The frame consists of highly-resistant ø 30 tubular steel and it is painted with oven-dried epoxy powders. This model is equipped with already welded bayonets for a quick fitting of armrests and backrest.The bed surface is made of a rectangular electro-welded mesh, suitable for manufacturing sofa beds for daily use, hou-seholds, hotels and cruise ships. The seat is provided with elastic belts to ensure a better comfort and a soft feel. The backrest in available in the standard and in a cushion-holding version.This mechanism can be combined with a spring mattress (14x190 cm o 14x195 cm) or with a polyurethane foam mattress (13x190 or 13x195 cm).The Grecale de Luxe mechanism is CATAS approved (report no. 174414 of 29/04/2014)

Depth cm 86Distance of the base frame from the ground cm 8/10


ACCESSORIES

TECHNICAL DRAWING

A detail of the Grecale de Luxe closing mechanism A detail of Grecale de Luxe mattress-holding device


GC 180 180 x 86 195 x 160 41 24

GC 160 160 x 86 195 x 140 38 22

GC 140 140 x 86 195 x 120 35 20

GC 92 92 x 86 195 x 75 28 14

Mat

tress

heig

ht

Wid

th

32 33

Grecale De Luxe - H14: MATTRESSGrecale de Luxe 195 polyurethane mattress: D. 21, 14 cm high, cover in Quilted Jacquard fabric

Grecale de Luxe 195 polyurethane mattress: D. 25, 14 cm high, cover in Quilted Jacquard fabric

Grecale de Luxe 195 spring mattress: 14 cm high, Cotton cover

Grecale de Luxe 195 polyurethane mattress: D. 30, cm 14 high, cover in Quilted Cotton

Grecale de Luxe 195 polyurethane mattress: D. 30 and MY Memory: D. 50, 13 cm high, removable cover in QuiltedWhite Stretch fabric

Grecale de Luxe 195 polyurethane mattress: D. 30, HR (high resistance) flameproof, 12 cm high, cover in FLAMEPROOF fabric

34 3534

Grecale De Luxe - H14: MATTRESS

Grecale de Luxe 195 polyurethane mattress: D. 30, 13 cm high, cover in Aloe Quilted Hypoallergenic Polyester Stretch Fabric

Grecale de Luxe 195 polyurethane mattress: D. 21, 13 cm high, cover in Quilted Stretch Fabric, WITH REMOVABLE COVER

Detail of the types of quilted fabrics availablev

3736

rapp. nr. 174414 del 29/04/2014

18

195

13

190

22 40

74

8 cm

18 50 18 194

86

A

44

55

92

30

85

47

7

26

MATTRESS MODELSGrecale de Luxe 195 polyurethane mattress, D. 25,cm 18, cover in Quilted Jacquard Fabric

Grecale de Luxe 195 polyurethane mattress: D. 30, non-deformable, 18 cm high, with breathable and cooling properties in differentiated zones, cover in Aloe Stretch Quilted Fabric.

Grecale de Luxe 195 spring mattress, 18 cm high,cover in Quilted Jacquard Fabric

TECHNICAL DRAWING

• Mechanism with welded bayonets• Standard backrest• Cushion-holding backrest and ratchet• Backrest split in two• Panel Locking Brackets• NEW Armetal Bayonets

electro-welded bed frame and elastic beltsDepth cm 86Distance of the base frame from the ground cm 8/10


ACCESSORIES

Grecale de Luxe 195 polyurethane mattress, D. 30,non-deformable, 18 cm high with a 5 cm layer of breathable and cooling Memory (5 different zones), removable cover in Quilted Coolmax Stretch Fabric

Detail of a polyurethane mattress with 5 different zones anda 5 cm Memory 50 layer


GC 180 180 x 86 195 x 160 44 24

GC 160 160 x 86 195 x 140 41 22

GC 140 140 x 86 195 x 120 38 20

GC 92 92 x 86 195 x 75 31 14

Grecale De Luxe - 195 - H18

Convertible mechanism for a 18 cm high mattress, with front opening system by rotating the backrest and then unrolling the frame with a single movement without having to remove the seat cushions and the backrest.The frame consists of highly-resistant ø 30 tubular steel and it is painted with oven-dried epoxy powders.This model is equipped with already welded bayonets for a quick fitting of armrests and backrest.The bed surface is made of a rectangular electro-welded mesh, suitable for manufacturing sofa-beds for daily use, both for the domestic market as well as for hotels and cruise ships.The seat is provided with elastic belts to ensure a better comfort and a soft feel.The backrest in available in the standard and in a cushion-holding version.This mechanism can be combined with a spring mattress (18x195 cm) or with a polyurethane foam mattress (18x195 cm).

38 39

Grecale De Luxe - 195 - DOUBLE SLATS

BACKREST MODELS - Grecale de Luxe

Convertible mechanism with front opening system by rotating of the backrest and then unrolling the base in a single movement without removing the seat cushions and the backrest.The frame consists of highly-resistant ø 30 tubular steel and it is painted with oven-dried epoxy powders.This model is equipped with already welded bayonets for a quick fitting of armrests and backrest.The bed surface is made of wooden slats that make it as comfortable as a standard bed.The seat is provided with elastic belts to ensure a better comfort and a soft feel.The backrest in available in the standard and in a cushion-holding version.This mechanism can be combined with a spring mattress (14x190 or 14x195 cm) or with a polyurethane foam mattress.(12/13x190 cm or 12/13x195 cm).The Grecale de Luxe mechanism is CATAS approved (report no. 174414 of 29/04/2014)

Grecale De Luxe - 195 - WHOLE SLATSthis model is produced on request for a minimum order of 50 piecesthis model is produced on request for a minimum order of 50 pieces

414040

3 : Grab the end part of the bed and bring it closer to the floor with a simple rotation as shown by the arrows.

4 : The sofa in the bed position.

Instructions for OPENING Grecale de Luxe

Instructions for CLOSING Grecale de Luxe

1 / 2: Lift the mechanism in the direction indicated by the arrow, grabbing the backrest and causing it to rotate by 90° as shown by the arrow.

5 : In the first closing phase, lift part B of the mechanism and rotate it by about 90°, applying pressure on point A.

6 : Exert pressure on the backrest and rotate it in the direction shown by the arrows.

7 : Lastly, apply pressure on the backrest.

Note: Make sure that no quilts and/or cushions are left inside the mechanism

42 43

26

197

29

21

195

slats

Standard depthcm 197Distance of the base frame from the ground cm 4Mattress length: 195 cm

• Joining cross-beam• NEW Armetal bayonets with through-hole


ACCESSORIES

MATTRESS MODELS

TECHNICAL DRAWING

Tifone 195 polyurethane mattress: D. 30, 21 cmhigh, cover in Quilted Jaquard Fabric

Wid

th

Mat

tres

Tifone - 195

Orthopaedic bed with box in which the sleep surface can be lifted to make a compartment located under the frame available, where cushions and blankets can be placed.This movement is allowed by a pair of gas pistonsThe frame consists of highly-resistant tubular steel and it is painted with oven-dried epoxy powder.The sleep surface is an orthopaedic one with curved wooden slats. The box can be fully removed for easy transport.

ACCESSORIES

NEW Armetal bayonets with through-hole

Joining cross-beam


TF 170 170 x 195 195 x 170 48 34

TF 160 160 x 195 195 x 160 44 32

TF 140 140 x 195 195 x 140 40 28

TF 120 120 x 195 195 x 120 36 24

TF 90 90 x 195 195 x 90 31 18

TF 80 80 x 195 195 x 80 28 16

44 4544

NEW Armetal Bayonets

ACCESSORIES

Panel Locking Brackets

Rings with HookScrews for BackrestsRubber Plugs

mm 25/30 Ømm 25 Ø

Mechanism Opening HandlesPlastic Feet

in poliestere ad anello in poliestere con ganci in acciaio

Via Nazionale, 7-9-11 - 47017 Rocca S. Casciano Forlì - ItaliaTel. (++39).0543.960139 Fax (++39).0543.950063

www.armetalitalia.com - [email protected]

katalog produktÓw general catalogue · el112 112 x 62 180 x 95 23 2,5 el102 102 x 62 180 x 85 21...

Documents