ke00-kpd-c10-gl-0001-000
DESCRIPTION
oil and gasTRANSCRIPT
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 3 of 12
Guidelines for HVAC Codes & Standards
Document Distribution
Date Copies No Format
Site Addressee / Position Holder Company
Stefano Rovelli AGIP KCO
Roberto Dalla Libera AGIP KCO
Paolo Palmonella AGIP KCO
Raymond Ruetsch AGIP KCO
Vijay Patel AGIP KCO
Angelo Marzoli AGIP KCO
Franco Mari AGIP KCO
Luigi Belloni AGIP KCO
Angelo Ruiu AGIP KCO
Mike Palmer KDPC
Norman Parker KDPC
Total
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 4 of 12
Guidelines for HVAC Codes & Standards
TABLE OF CONTENTS
1. INTRODUCTION 5 1.1 SCOPE 5 1.2 DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS 5 1.3 DEFINITIONS 5 1.3.1 General definitions 5 1.3.2 Specific definitions 5 1.4 ABBREVIATIONS 5 2. ROLES AND RESPONSIBILITIES 6 3. DOCUMENT STRUCTURE 7 3.1 GENERAL 7 3.2 PROCEDURE 7 4. ANNEXES 7 4.1 ANNEX 1. LIST OF NORMATIVE HVAC CODES & STANDARDS 7 4.2 ANNEX 2. LIST OF INFORMATIVE EXTERNAL HVAC CODES & STANDARDS 10 4.3 ANNEX 3. LIST OF INTERNAL HVAC CODES & STANDARDS/ KASHAGAN TECHNICAL
SPECIFICATIONS (KTS) 11 4.4 ANNEX 4. LIST OF DEVIATIONS 12
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 5 of 12
Guidelines for HVAC Codes & Standards
1. INTRODUCTION
1.1 SCOPE
This document defines which Codes and Standards will be applied to the detailed HVAC design of the Kashagan Development Projects
1.2 DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS
All Agip KCO contractors & subcontractor
1.3 DEFINITIONS
1.3.1 General definitions
The Contractor is the party which carries out all or part of the design, engineering, procurement, construction, commissioning or management of a project, or operation or maintenance of a facility. The Company may undertake all or part of the duties of the Contractor.
The Manufacturer/Supplier is the party which manufactures or supplies equipment and services to perform the duties specified by the Contractor.
The Company is the party which initiates the project and ultimately pays for its design and construction. The Company will generally specify the technical requirements. The Company may also include an agent or consultant authorised to act for, and on behalf of, the Company.
The word shall indicates a requirement.
The word should indicates a recommendation.
1.3.2 Specific definitions
Standard - Document, established by consensus and approved by a recognised body, that provides, for common and repeated use, rules, guidelines or characteristics for activities or their results, aimed at the achievement of the optimum degree of order in a given context.
External Standard - Standard (e.g. ISO, EN, ANSI, BS, API, ST RK, GOST, SNiP etc.) issued under the auspices of a non Agip KCO body.
KTS - Kashagan Technical Specification (Internal Standard)
Custodian - Line manager of the Author, or the relevant senior discipline specialist (if different), responsible for the approval of a Kashagan Technical Specification within the originating discipline, and ultimately responsible for the contents of the Kashagan Technical Specification.
Author - Person responsible for identifying the acceptable external standards and responsible for writing a Kashagan Technical Specification (KTS). The Author acts as the focal point for questions relating to the content and meaning of a KTS.
Client AGIP KCO Contractor Any provider of services to Client, including consultants Vendor Any seller, provider or supplier of goods to Contractor
1.4 ABBREVIATIONS
The following abbreviations are used in this document
ABS American Bureau of Shipping
AISC American Institute of Steel Construction
API American Petroleum Institute
ARI Air-Conditioning & Refrigeration Institute
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 6 of 12
Guidelines for HVAC Codes & Standards
ASHRAE American Society of Heating, Refrigeration & Air-Conditioning Engineers
AWS American Welding Society
CIBSE The Chartered Institute of Building Services Engineers
GOST State Standard
HVCA Heating & Ventilation Contractors Association
IEC International Electrotechnical Commission
IMO International Maritime Organisation
IP Institute of Petroleum
ISO International Standards Organisation
NFPA National Fire Protection Association
PB Safety Regulations
PUE RoK Normative Document
SanPin Sanitary Rules
SMACNA Sheet Metal & Air-Conditioning Companies National Association
SOLAS Society of Life at Sea
SNiP CIS Construction Rules & Norms
VNTP RoK Process Design Norms
VSN Departmental Construction Norms
RND RoK Methodical Guidelines
Cross references
GE00.KST.A50.PS.0002.000 Company Standard for Standards KE01.00.000.KD.Q.LS.0001.000 Codes & Standards Document Register KE01.00.000.AK.A.LD.0003.000 F01 Register of Kashagan Technical Specifications (KTS) KE01.00.000.AK.A.PR.0724.000 Procedure Identification, Developing and Registration of External Standards and Kashagan Technical Specifications
2. ROLES AND RESPONSIBILITIES
Standards Implementation Engineer Standards Implementation Engineer is responsible for facilitation of the process of development of the current Document on HVAC Codes & Standards. All changes in the documents will be discussed with Codes & Standards Group in order to make it aliened with other disciplines and update/maintain the Access database of External Codes & Standards. The Database of External Codes & Standards is updated regularly by AGIP KCO Codes & Standards Group and updates are automatically fed into the current document and other way around - the changes of the document are captured in the Database.
The register of (KTS) Kashagan Technical Specifications (Internal standards) is updated regularly by AGIP KCO Codes & Standards Group and any updates are automatically fed into the current document and other way around - the changes of the document are captured in the KTS Register.
HVAC Engineer
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 7 of 12
Guidelines for HVAC Codes & Standards
HVAC Engineer is responsible for preparation of the current document for HVAC discipline with the project. These documents are not project specific i.e. do not apply just to offshore or onshore but to all sections of the project who are dealing with HVAC systems. AGIP KCO HVAC Engineer who is involved with the actual work is a custodian of the current document and responsible for update as and when required.
3. DOCUMENT STRUCTURE
3.1 GENERAL
HVAC Systems for the EP Projects will generally be designed in accordance with the Codes and Standards listed in Annex 1, except where they are overridden by specific Project Specifications
For the International and de facto International standards not Registered in RoK any conflicts shall be identified with the equivalent Republic of Kazakhstan Standards and an approved deviation shall be obtained from the relevant RoK authority.
3.2 PROCEDURE
The applicable external HVAC codes and standards and project specifications have been identified in accordance with the Procedure Identification, Developing and Registration of External Standards and Kashagan Technical Specifications, developed by Codes and Standards.
This procedure defines the process by which External Standards are added to Agip KCO's Database of External Standards, and, dependent upon priority level, how these standards are then registered within the RoK. This procedure also defines the process by which a Kashagan Technical Specification is developed (or revised), registered within Agip KCO, and, where applicable, expertized within the RoK.
The Agip KCO External Standards database includes a justification code for why that particular standard was selected as follows:
Justification Code 1: Recognised International Standards (ISO, IEC, ITU)
Justification Code 2: De facto International standards
Justification Code 3: Industry Standards
Justification Code 4: RoK Standards.
4. ANNEXES
4.1 ANNEX 1. LIST OF NORMATIVE HVAC CODES & STANDARDS
(Total number: 56)
Standard No. Standard Title
American Bureau of Shipping (ABS)
ABS 2 Part 2 RULES FOR MATERIALS AND WELDING - PART 2
American Institute of Steel Construction (AISC)
AISC ASD ASD Manual of Steel Construction Allowable Stress Design
American Petroleum Institute (API)
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 8 of 12
Guidelines for HVAC Codes & Standards
API RP 14-G1993 Control and Mitigation of Fire & Explosion
Air-Conditioning & Refrigeration Institute (ARI)
ARI Standard 550 Centrifugal and rotary screw water-chilling packages
American Society of Heating, Refrigeration & Air-Conditioning Engineers (ASHRAE)
ASHRAE Handbooks
Guide and Data Books for heating ventilation and air conditioning
American Society of Mechanical Engineers (ASME)
ASME B1.20.1 Pipe Threads General Purpose, Inch
American Welding Society (AWS)
AWS D1.1 American Welding Society Struct. Weld. Code
British Standards Institute (BSI)
BS 5422 Method for specifying thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40C to +700C
BS 5720 Code of Practice for Mechanical Ventilation & Air Conditioning in Buildings
BS 7350 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
BS EN 378-1 Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 1: Basic Requirements, Definitions, Classification and Selection Criteria
BS EN 378-2 Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 2: Design, Construction, Testing, Marking and Documentation
BS EN 378-3 Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements - Part 3: Design, Construction, Testing, Marking and Documentation
BS EN 378-4 Refrigerating systems and heat pumps Safety and environmental requirements Part 4: Operation, maintenance, repair and recovery
State Standard (GOST)
GOST 12.1.005-88 System of occupational safety standards (SOSS). Working zone air. General sanitary requirements.
GOST 12.1.003-83 Noise - General Safety Requirements
Safety Regulations (PB)
PB-03-75-94 Rules of installation and safe operation of steam and hot water pipelines
PB Safety Regulations for Conducting Petroleum Operations Offshore and in Internal Water Bodies of the Republic of Kazakhstan Astana 1998, Approved by Order No 39)
CIS Construction Rules & Norms (SNiP)
SNiP 2.09.02-85* Industrial Buildings
SNiP 2.11.02-87 Coolers
SNiP RK II-35-2001 Boiler plant
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 9 of 12
Guidelines for HVAC Codes & Standards
SNiP RK 4.01-02-2001
Water supply. External networks and facilities
SNiP RK 4. 02-05-2001
Heating, ventilation and air conditioning.
SNiP 2.04.07-86* Heating networks (Technical Requirements)
SNiP 2.04.14-88* Equipment and pipeline thermal insulation Thermal insulation equipment and pipelines.
SNiP 3.05-01-85 SNiP 3.05.01-85
Internal plumbing installations Internal sanitary and technical systems.
SNiP 3.05-03-85 Heat networks (Installation Requirements)
Heating & Ventilation Contractors Association (HVCA)
DW/143 Testing and Commissioning Ductwork Systems
DW/144 Specification for Sheet Metal Ductwork
DW/154 Specification for Plastic Ductwork
International Electro-technical Commission (IEC)
IEC 60079 Electrical apparatus for explosive gas atmospheres
IEC 60654-1 Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions
IEC 60654-1 Industrial-Process Measurement and Control Equipment - Operating Conditions - Part 1: Climatic Conditions Second Edition;
EIN 10025 Hot Rolled Product of Non Alloy Struct. Steel
International Maritime Organisation (IMO)
IMO IMO MODU Code 1989 with 1991 amendment
IMO IMO MODU Code 1992 Construction of Mobile Offshore Drilling units
Institute of Petroleum (IP)
IP 15 Model Code of Safe Practice - Part 15: Area Classification Code for Petroleum Installation.
Instrument Society of America (ISA)
ISA tr12.24.01/1998 (IEC 79-10 Mod)
Recommended Practice for Classifications of Locations for Electrical Installations. Classified as Class 1,Zone 0,Zone 1 or Zone 2. Classification for Gaseous Environment.
International Standards Organisation (ISO)
ISO 834 Fire Resistance Tests
ISO 15138 Cor. 1 Petroleum and Natural Gas Industries Offshore production installations Heating, ventilation and air-conditioning
ISO 13819-2 Offshore Fixed Steel Structures
NF E 35-400 Refrigerant plant, Safety rules
National Fire Protection Association (NFPA)
NFPA 72 National Fire Protection Association Codes
NFPA 90A Air conditioning and ventilation Systems
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 10 of 12
Guidelines for HVAC Codes & Standards
NFPA 90B Warm air heating and air conditioning Systems
NFPA 101 NFPA 2001 Life Safety Codes
RoK Normative Documents
PUE Rules for Arrangement of Electrical Installation, 6th Edition
RoK Order 185 (Technical Offshore Rules)
Technical rules for construction of facilities during conduct of petroleum operations offshore and in internal water bodies of the Republic of Kazakhstan -Astana 1999
RoK Joint Order 1878, 182-II
(Offshore Instruction)
Instructions for Compliance with the Environmental Protection Norms During Planning and Conducting of Petroleum Operations Offshore, in the Costal Area and Internal Water Bodies of the Republic of Kazakhstan Astana 1999.
RoK Sanitary Rules (SanPin)
SanPin 1.06.062.94 Sanitation Regulations for floating Drilling Rigs
International Maritime Organisation (IMO)
SOLAS International Convention for the Safety of Life at Sea - consolidated edition 2001
SCI SCI - p - 112: Interim Guidance Notes for The Design and Protection of Topside Structures Against Explosion and Fire
Sheet Metal & Air-Conditioning Companies National Association (SMACNA)
SMACNA
Instructions for Compliance with the Environmental Protection Norms During Planning and Conducting of Petroleum Operations Offshore, in the Costal Area and Internal Water Bodies of the Republic of Kazakhstan Astana 1999.
RoK Process Design Norms (VNTP)
VNTP 3-85
Process Design Standards for Oil, Gas and Water Gathering, Transport and Treatment Facilities Engineering design standards for collection, transportation and treatment facilities for oil, gas and water in oil fields
Departmental Construction Norms (VSN)
VSN 21-77 Instructions on designing heating and ventilation for oil processing and petrochemical enterprises
Departmental Instructions for Fire Prevention Design (VUPP)
VUPP-88 Directives for the design of enterprises and buildings for the transformation oil and petrochemical industry in accordance with fire protection techniques
4.2 ANNEX 2. LIST OF INFORMATIVE EXTERNAL HVAC CODES & STANDARDS
(Total number: 11)
Standard No. Standard Title
The Chartered Institute of Building Services Engineers (CIBSE)
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 11 of 12
Guidelines for HVAC Codes & Standards
Commissioning Code Series A
Air Distribution Systems High and Low Velocity
Commissioning Code Series C
Automatic Controls
Commissioning Code Series R
Refrigeration Systems
Commissioning Code Series W
Water Distribution Systems
Guide Book A Design data
Guide Book C Reference Data
Publication B1 Heating
Publication B3 Ductwork
Publication B5 Noise
Guide Book B Section 14
Refrigeration and Heat Rejections
Guide Book B Section 16
Miscellaneous Equipment
4.3 ANNEX 3. LIST OF INTERNAL HVAC CODES & STANDARDS/ KASHAGAN TE CHNICAL SPECIFICATIONS (KTS)
(Total number : 30)
Standard Title. Standard No. Revision
Functional Specification: HVAC & Building Utilities - Industrial Building Area
KE01.A0.690.KD.C.SF.0001.000 F01
Functional Specification: HVAC & Building Utilities - Utilities Area
KE01.A0.690.KD.C.SF.0002.000 F01
Functional Specification: HVAC & Building Utilities - Water Treatment Area
KE01.A0.690.KD.C.SF.0004.000 F01
Functional Specification: HVAC & Building Utilities - Power Generation Area
KE01.A0.690.KD.C.SF.0006.000 F01
Functional Specification: HVAC & Building Utilities - Oil Treatment Area
KE01.A0.690.KD.C.SF.0007.000 F02
Functional Specification: HVAC & Building Utilities - Sulphur Plant
KE01.A0.690.KD.C.SF.0008.000 F01
Functional Specification: HVAC & Building Utilities - Gas Treatment Area
KE01.A0.690.KD.C.SF.0009.000 F02
Functional Specification: HVAC & Building Utilities - Pump House Buildings
KE01.A0.690.KD.C.SF.0011.000 F02
Functional Specification: HVAC & Building Utilities - Electrical Sub-Station Buildings
KE01.A0.690.KD.C.SF.0012.000 F01
TECHNICAL SPECIFICATION: ONSHORE PLANT GEOTECHNICAL INVESTIGATION
KE01.A0.000.KD.C.ST.0002.000 E01
-
Agip KCO KE00.KPD.C10.GL.0001.000 Rev. A01 July 2004
Page 12 of 12
Guidelines for HVAC Codes & Standards
BARGES 16 & 17 F.G.COMPRESSOR HALLS ARCHITECTURAL & HVAC FUNCTIONAL SPECIFICATION
KE01.B4.655.KD.C.SF.0005.000 F01
FUNCTIONAL SPECIFICATION: STRUCTURAL, ARCHITECTURAL & HVAC - BARGE 10 UTILITY MODULE
KE01.B4.655.KD.C.SF.0008.000 F02
Functional Specification: Temporary Refuge Module
KE01.B4.655.KD.C.SF.0003.000 F02
Functional Specification: Local Equipment Room DI - Drilling Island
KE01.B4.655.KD.C.SF.0004.000 F01
BARGES 16 & 17 LER FG3 & FG4 Functional Specification
KE01.B4.655.KD.C.SF.0006.000 F01
LER R.I. Functional Specification Riser Island KE01.B4.655.KD.C.SF.0009.000 F01
Functional Specification: Living Quarters Evacuation Tunnel & Escape Vehicle Garage
KE01.B4.655.KD.C.SF.0010.000 F02
Functional Specification: Barges 3 & 4 - Local Equipment Rooms FG1 FG2
KE01.B4.655.KD.C.SF.0011.000 F01
Functional Specification: Architectural & HVAC: Barge 8 - Utilities Module
KE01.B4.655.KD.C.SF.0012.000 F01
Architectural & HVAC Functional Specification: Barges 3 & 4 F.G. Compressor Halls
KE01.B4.655.KD.C.SF.0013.000 F01
Barge 9 Utilities Module New Turbo generation Station Arch & HVAC Functional Specification
KE01.B4.655.KD.C.SF.0014.000 F01
Architectural & Functional Specification: Living Quarters
KE01.B4.655.KD.C.SF.0001.000 F01
HVAC Functional Specification: Living Quarters
KE01.B4.655.KD.C.SF.0002.000 F01
Functional Specification For Water Treatment Building
KE01.D0.000.KD.C.SF.0001.000 D01
Functional Specification For Effluent Treatment Building HVAC & Building Utilities
KE01.D0.000.KD.C.SF.0002.000 D01
Functional Specification For Gatehouse HVAC & Building Utilities
KE01.D0.000.KD.C.SF.0003.000 D01
Functional Specification: Containerised Boiler Package
KE01.D0.000.KD.C.SF.0004.000 D01
Functional Specification For Technical Water & Firewater Pumphouse
KE01.D0.000.KD.C.SF.0005.000 D01
Functional Specification For Hvac & Building Utilities Plant Facilities Buildings
KE01.D0.690.KD.C.SF.0008.000
Specification: HVAC Equipment KE01.A0.690.KD.C.ST.0004.000 P01
4.4 ANNEX 4. LIST OF DEVIATIONS
(Total number 0)