Keith A. Kelley Phone: 530-632-0407 Email: kkelleyca@yahoo.com ________________________________________________________________________________ Professional Summary: Air Force Veteran with Over 10 years of Electrical/Electronic experience in the Aircraft Industry. Familiar with a wide variety of military and civilian aircraft including, but not limited to Boeing 737, 757, 767, B52G, KC135A, C130E, C141B, C5A and UH-1N aircraft. - Possess FAA Airframe & Powerplant Certificate and FCC General Radio Telephone Operators License. Work Experience - DIESEL ELECTRICIAN, Union Pacific Railroad, Roseville, CA (November 2000 – June 2015): Used maintenance instructions, blue prints, wiring diagrams, multi-meters, meggers, clamp-on ammeters, Larry McGee Power Testers, Cab Signal analyzers, battery chargers (lead-acid and gel), computer laptops, remote controlled ceiling cranes, Haulotte man-lifts, wire maintenance tools (e.g. crimpers, insertion/extraction devices, soldering station), power tools (e.g. drills, impact guns, side-winder ratchets), fall prevention gear and various common hand tools to troubleshoot, maintain and repair railroad locomotive electrical/electronic systems on GE/EMD units. - AVIONICS INSTALLER, Dee Howard Aircraft Maintenance, San Antonio, TX (April 1999 – September 1999): Used multi-meters, meggers, maintenance instructions, blue prints, wiring diagrams, wiring list, wire maintenance tools (e.g. strippers, crimpers, soldering station), power tools and various common hand tools to modify, maintain and install avionics equipment/wiring on B737, B757 and B767 aircraft. - AVIONICS INSTALLER, B.F. Goodrich Aerospace, Everett, WA (June 1997 – March 1999): Same duties as listed above. - AIR TECHNICIAN, In-Flight Phone Corporation, Oakbrook Terrace, IL (December 1993 – May 1997): tested and maintained an onboard telephone/entertainment system on B737 and B757 aircraft. - AVIONICS INSTALLER, Gulfstream Aerospace, Long Beach, CA (March 1990 – August 1990): ): Used multi-meters, meggers, maintenance instructions, blue prints, wiring diagrams, wiring list, wire maintenance tools (e.g. strippers, crimpers, soldering station), power tools and various common hand tools to modify, maintain and install avionics equipment/wiring on G III and G IV aircraft. - AIRCRAFT ELECTRICIAN, U.S. Air Force, Fairchild AFB, Kadena AB, Yokota AB (May 1981 – February 1990): Used multi-meter, megger, clamp-on ammeter, frequency meter, wattmeter, hydrometer, oscilloscope, battery chargers (lead-acid and ni-cad), various types of crimpers, insertion/extraction devices, strippers, soldering tools/devices, technical orders, blue prints, wiring diagrams, wire list and many kinds of common hand tools (e.g. screw drivers, wrenches, pliers) to troubleshoot, repair, maintain and modify aircraft electrical/electronic systems on B52G, KC135A, C130E, C141B, C5A and UH-1N aircraft. Education * Cheyenne Aero Tech, Cheyenne WY: Certificated in Airframe & Powerplant * Various U.S. Air Force training schools including: Aircraft Electrician School; B52G, KC135A, C130E and C141B Aircraft Familiarization Schools, High Reliability Soldering School, Ni-Cad Battery Servicing School and Non-Commissioned Officer Leadership School. * Redmond High School, Redmond, OR: Diploma Received * Various Locomotive Familiarization courses.