kenwood programming information
TRANSCRIPT
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
Up one levelBack to Home
Kenwood Land Mobile RadioProgramming Information
HTML'd for repeater-builder by Mike Morris WA6ILQ(callsign) at repeater-builder dot com
The three tables below were received as two anonymous emails in December of 2008. All we did was clean up theformatting and convert it into HTML for the web. Since we're not Kenwood geeks the Repeater-Builder staff can'ttake responsibility for the accuracy. Since a KPG-4 (with a 6 pin RJ-series plug) can be used in place of a KPG-46(8-pin RJ-series plug) there are probably a bunch of errors in the cable specifications. There are a lot of unknowns aswell, indicated by "?" in the tables.
If you can donate any information (including PDFs of any radio brochures, like the TK-255 below, or photos of theprogrammers or the programming cables) please send an email to Mike WA6ILQ at the email address above.
Likewise please let us know if you have any corrections or any additions to fill in some of the blanks below.
Radio Software OSProgramming
cable Notes
Handhelds (TK-1nn to 4nn)TK-190
KPG-59D DOS KPG-36
TK-230
KPG-11D DOS KPG-10
TK-240
KPG-11D DOS KPG-10
TK-249
KPG-20D DOS KPG-8 Or KPG-22 cable
TK-250
KPG-23D DOS KPG-22 KPG-8 cable can also be used.
TK-255
KPG-31D DOS KPG-22 KPG-8 cable can also be used.
TK-259
KPG-32D DOS KPG-22 KPG-8 cable can also be used.
TK-260
KPG-27D orD1
DOS KPG-22 KPG-8 cable can also be used.
TK-260
KPG-77D DOS ? See note 4.
TK-260G
KPG-56D Windows ?
TK-261
KPG-34D ? ? See note 4.
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
TK-270
KPG-27D orD1
DOS KPG-22 Wideband only.
TK-270G
KPG-56D Windows ? Narrowband-capable version of the TK-270
TK-272
KPG-27D orD1
DOS ?
TK-272G
KPG-56D Windows ?
TK-278
KPG-27D orD1
DOS KPG-22 KPG-8 cable can also be used.
TK-278G
KPG-56D Windows ?
TK-280
KPG-49D See note KPG-36
The KPG-49D Version 2.(any number) and 3.(any number) are DOSbased, while version 4.(any number) are Windows based and mucheasier to use.
TK-285
KPG-62D DOS KPG-36
TK-290
KPG-38D DOS ?
TK-330
KPG-11D DOS KPG-10
TK-340
KPG-11D DOS KPG-10
TK-349
KPG-20D DOS KPG-8 Or KPG-22 cable
TK-350
KPG-23D DOS KPG-22 KPG-8 cable can also be used.
UHF version of the VHF TK-250
TK-353
KPG-26D DOS KPG-22 KPG-8 cable can also be used.
TK-355
KPG-31D DOS KPG-22 KPG-8 cable can also be used.
TK-359
KPG-32D DOS KPG-22 KPG-8 cable can also be used.
TK-360
KPG-27D orD1
DOS KPG-22 KPG-8 cable can also be used.See note 4.
TK-360
KPG-77D DOS KPG-22 KPG-8 cable can also be used.
See note 4.
TK-360G
KPG-56D Windows ?
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
TK-361
KPG-34D ? ? See note 4.
TK-370
KPG-27D orD1
DOS KPG-22 KPG-8 cable can also be used.
TK-370G
KPG-56D Windows ?
TK-372
KPG-27D orD1
DOS KPG-22 KPG-8 cable can also be used.
TK-373G
KPG-76D Windows ?
TK-378
KPG-27D orD1
DOS KPG-22 KPG-8 cable can also be used.
TK-378G
KPG-56D Windows ?
TK-380
KPG-49D See note KPG-36
The KPG-49D Version 2.(any number) and 3.(any number) are DOSbased, while version 4.(any number) are Windows based and mucheasier to use.
TK-385
KPG-62D DOS KPG-36
TK-388
KPG-27D DOS KPG-22 KPG-8 cable can also be used.
TK-390
KPG-38D DOS ?
TK-430
KPG-16D DOS KPG-8 Or KPG-22 cable
TK-431
KPG-16D DOS KPG-8 Or KPG-22 cable
TK-480(early)
KPG-35D DOS KPG-36
800 MHz handheld, early version (serial numbers prior to 3010000)There are also two different spec sheets - the early (narrow) and later(wide) ones.
TK-480(late)
KPG-49D See note KPG-36
KPG-49D Version 2.(any number) and 3.(any number) are DOSbased, while version 4.(any number) are Windows based and mucheasier to use.The TK-480 is an 800 MHz handheld, later version (serial numbersafter 3010000, model plate marked "Ver 2.0, and with a red triangleabove the "W" in the KENWOOD logo label at the top of the frontpanel)There are also two different spec sheets - the early (narrow) and later(wide) ones.
TK-481 KPG- DOS KPG-36
900 MHz handheld, early version (serial numbers prior to 3010000)There are also two different spec sheets - the early (narrow) and later
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
(early) 35D (wide) ones.
TK-481(late)
KPG-49D See note KPG-36
KPG-49D Version 2.(any number) and 3.(any number) are DOSbased, while version 4.(any number) are Windows based and mucheasier to use.The TK-481 is a 900 MHz handheld, later version (serial numbersafter 3010000, model plate marked "Ver 2.0, and with a red triangleabove the "W" in the KENWOOD logo label at the top of the frontpanel)There are also two different spec sheets - the early (narrow) and later(wide) ones.
Mobiles (TK-6nn-9nn)TK-630 KPG-7D DOS KPG-4 Low band version of the High band TK-730 and UHF TK-830
TK-690
KPG-44D Windows KPG-43 Low band version of the High band TK-790 and UHF TK-890
TK-705 ? DOS ? High band version of TK-805
TK-705D KPG-6D DOS KPG-4 High band version of TK-805D
TK-706D KPG-6D DOS KPG-4 High band version of TK-806D
TK-709
KPG-20D DOS KPG-4 High band version of TK-809. European radio, not FCC Type
Approved.
TK-715
KPG-41D DOS KPG-4
TK-730 KPG-7D DOS KPG-4 High band version of the low band TK-630 and UHF TK-830
TK-740
KPG-47D DOS ? High band version of the UHF TK-840. Uses the KPG-46 cable.
TK-752
KPG-28D DOS KPG-4
TK-759
KPG-28D DOS KPG-4
TK-760
KPG-29D DOS KPG-46
TK-760G
KPG-56D Windows ?
TK-762
KPG-29D DOS KPG-4
TK-762G
KPG-56D Windows ?
TK- KPG-
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
768 29D DOS KPG-4
TK-768G
KPG-56D Windows KPG-46
TK-780
KPG-49D See note KPG-46
KPG-49D Version 2.(any number) and 3.(any number) are DOSbased, while version 4.(any number) are Windows based and mucheasier to use.
TK-780
KPG-60D DOS KPG-46 See note 4
TK-782
KPG-77D ? ?
TK-785
KPG-62D DOS KPG-46
TK-790
KPG-44D DOS KPG-43 High band version of the low band TK-690 and UHF TK-890
TK-805 ? DOS ?
TK-805D KPG-6D DOS KPG-4
TK-806D KPG-6D DOS KPG-4
TK-809
KPG-20D DOS KPG-4 UHF version of TK-709. European radio, not FCC Type Approved.
HT cousin is TK349.
TK-815
KPG-41D DOS KPG-4
TK-830 KPG-7D DOS KPG-4 UHF version of the low band TK-630 and High band TK-730
TK-840
KPG-25D DOS KPG-4
400 MHz version of the 800 MHz TK-940 and 900 MHZ TK-941Later units use KPG-25DM or KPG-25DM2 software.See note 4.
TK-840
KPG-47D DOS KPG-46 UHF version of the high band TK-740.
See note 4.
TK-852
KPG-28D DOS KPG-4
TK-859
KPG-28D DOS KPG-4
TK-860
KPG-29D DOS KPG-4
TK-860G
KPG-56D Windows ?
TK-862
KPG-29D DOS KPG-4
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
TK-862G
KPG-56D Windows ?
TK-868
KPG-29D DOS KPG-4
TK-868G
KPG-56D Windows KPG-46
TK-840
KPG-25D DOS KPG-4 Later units use KPG-25DM or KPG-25DM2 software.
TK-863G
KPG-76D Windows ?
TK-880
KPG-49D see note KPG-46
USA version of the TK-880.The KPG-49D Version 2.(any number) and 3.(any number) are DOSbased, while version 4.(any number) are Windows based and mucheasier to use.
TK-880
KPG-60D DOS KPG-46 European version
TK-885
KPG-62D DOS KPG-46
TK-890
KPG-44D DOS KPG-43 UHF version of the low band TK-690 and the high band TK-790
TK-930 KPG-5D DOS KPG-4
TK-931 KPG-5D DOS KPG-4
TK-940
KPG-25D DOS KPG-4 800 MHz version of the 400 MHz TK-840 and 900 MHZ TK-941
Later units use KPG-25DM or KPG-25DM2 software.
TK-941
KPG-25D DOS KPG-4 900 MHz version of the 400 MHz TK-840 and 800 MHZ TK-940
Later units use KPG-25DM or KPG-25DM2 software.
TK-980
KPG-49D See note KPG-46
The TK-980 is an 800 MHZ mobileKPG-49D Version 2.(any number) and 3.(any number) are DOSbased, while version 4.(any number) are Windows based and mucheasier to use.
TK-981
KPG-49D See note KPG-46
The TK-981 is a 900 MHZ mobileKPG-49D Version 2.(any number) and 3.(any number) are DOSbased, while version 4.(any number) are Windows based and mucheasier to use.
Newer 4-digit model numbersTK-2100
KPG-48D Windows ?
TK-2101
KPG-48D Windows KPG-22
TK- KPG- Windows KPG-22
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
2107 55D
TK-2118
KPG-69D ? ?
TK-2160
KPG-82D Windows ?
TK-2170
KPG-101D Windows ?
TK-3160
KPG-82D Windows ?
TK-3180
KPG-89D Windows ?
TK-2100
KPG-48D DOS ?
TK-2102
KPG-55D DOS ?
TK-2107
KPG-55D DOS ?
TK-2140
KPG-74D Windows ?
TK-2160
KPG-82D ? ?
TK-2170
KPG-101D ? ?
TK-2180
KPG-89DKSee note
Windows ? For programming the TK7180/8180/7189/8189/2180/3180 in the UK(that is E variants), use KPG-92D software.
TK-3100
KPG-48D DOS ?
TK-3101
KPG-48D Windows KPG-22
TK-3102
KPG-55D DOS ?
TK-3107
KPG-55D Windows KPG-22
TK-3118
KPG-69D ? ?
TK-3130
KPG-75D Windows ?
TK-3131
KPG-75D Windows ?
TK- KPG- Windows ?
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
3140 74D
TK-3160
KPG-82D ? ?
TK-3170
KPG-101D ? ?
TK-3173
KPG-101D ? ?
TK-3180
KPG-89DSee note
Windows ? For programming the TK7180/8180/7189/8189/2180/3180 in the UK(that is E variants), use KPG-92D software.
TK-3200
KPG-88D Windows ?
TK-6110
KPG-59D DOS ?
TK-7102
KPG-70D ? ?
TK-7108
KPG-70D ? ?
TK-7150
KPG-79D Windows KPG-46
TK-7160
KPG-99DK Windows KPG-46
TK-7180
KPG-89DKSee note
Windows KPG-46
High band version of the TK-8180. Similar to TK7189 but has afaceplate speaker instead of the 12-button DTMF keypad. 25w, 128groups, max 512 channels. For programming theTK7180/8180/7189/8189/2180/3180 in the UK (that is E variants),use KPG-92D software.
TK-7189
KPG-89DKSee note
Windows KPG-46
High band version of the TK-8189. Similar to TK7180 but has a 12-button DTMF keypad instead of the faceplate speaker (requiresexternal speaker). 25w, 128 groups, max 512 channels. Forprogramming the TK7180/8180/7189/8189/2180/3180 in the UK(that is E variants), use KPG-92D software.
TK-8102
KPG-70D ? ?
TK-8108
KPG-70D ? ?
TK-8150
KPG-79D Windows KPG-46
TK-8160
KPG-99DK Windows KPG-46
TK-8180
KPG-89DK Windows KPG-46
UHF version of the TK-7180. Similar to TK8189 but has a faceplatespeaker instead of the 12-button DTMF keypad. 25w, 128 groups,max 512 channels. For programming the
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
See note TK7180/8180/7189/8189/2180/3180 in the UK (that is E variants),use KPG-92D software.
TK-8189
KPG-89DKSee note
Windows KPG-46
UHF version of the TK-7189. Similar to TK8180 but has a 12-button DTMF keypad instead of the faceplate speaker (requiresexternal speaker). 25w, 128 groups, max 512 channels. Forprogramming the TK7180/8180/7189/8189/2180/3180 in the UK(that is E variants), use KPG-92D software.
Base StationsTKB-620
KPG-21D DOS KPT-50 Low band version of high band TKB-720 and UHF TKB-820
TKB-720
KPG-21D DOS KPT-50 High band version of low band TKB-620 and UHF TKB-820
TKB-820 ? ? ? UHF version of low band TKB-620 and high band TKB-720
RepeatersTKR-720
KPG-21D DOS KPT-50 High band version of the TKR-820
TKR-730 ? ? KPG-46 High band version of the TKR-830.
TKR-740 DOS KPG-46 High band version of the TKR-840.
TKR-750
KPG-66D Windows KPG-46 High band version of the TKR-850.
TKR-820
KPG-21D DOS KPT-50 UHF version of the TKR-720.
TKR-830 DOS KPG-46 UHF version of the TKR-730.
TKR-840 DOS KPG-46 UHF version of the TKR-740.
TKR-850
KPG-66D Windows KPG-46 UHF version of the TKR-750.
Notes:1) The KPG-36 is a KPG-4 with a one-piece speaker mic plug instead of a RJ-connector. You can use a KPG-4 witha home-made adapter that consists of a RJ-jack, some wire, and a speaker-mic connector. See these photos of a KPG-36 connector front and rear.
2) The KPG-22 is similar to the KPG-4 but with a dual connector (1/8" mini and a 1/16" sub-mini headphone-styleconnectors) for the later handhelds. See this photo and this schematic of a KPG-22 cable. You can make an adaptercable that will ket you use your KPG-4 on the handhelds that use a KPG-22 very easily using two separate plugs - justuse the plug connection info from the schematic.
3) Note that Kenwood numbers the pins backward from Ethernet. The KPG-4 and the KPG-46 are the exact sameunit except for the RJ connector on the radio end of the cable. The KPG-4 has a 6-pin (RJ-11 / RJ-12-style)connector. The earlier KPG-46 has an 8-pin connector (RJ-45 style) and the center 6 pins are wired the same and the
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
outer 2 pins are not used. If you are careful the 6-pin KPG-4 will work perfectly in the 8-pin mic jack. The plastic tabshould only let you put the 6-pin plug into the middle of the 8-pin jack since pins 1 & 8 on the 8-pin jack aren't usedfor programming purposes. Look carefully at the 6-pin plug however, some have a thicker shoulder that will push pins1 and 8 of the 8-pin jack up into the plastic body, bending and damaging the two pins. If you are going to build yourown programming adapter you could copy one trick I saw - the person used a dual jack snap-in housing, mounted theperf-board inside, had a DB-9 pigtail coming out of one side, a connector for a 12vDC wall wart on the same side,and both 6-pin and 8-pin jacks snapped into the housing. The two jacks were wired so he could use a common 6-pinphone cable to connect to to the 6-pin radios, and a common ethernet patch cord for the 8-pin radios. Or you couldbuild it with one connector, and build an adapter starting with a 6-pin RJ-12 jack wired to a stub of a common 8-pinRJ45 ethernet cable. See this schematic for a KPG-4 and KPG-46 cable. Or look here - Here's another one. If you aregoing to build your own programming adapter you will want to print both and study them.
4) Yes, conflicting information. It's what we received. We'd love to have any info that will resolve the conflicts.
Cable Radio
KPG-4SeeNote 3above.
KPT-50, TK-630, TK-630, TK-705, TK-705, TK-705D, TK-706, TK-706D, TK-709, TK-715, TK-730, TK-730, TK-740, TK-750, TK-752, TK-759, TK-760, TK-760, TK-760G, TK-762, TK-762, TK-762G, TK-763, TK-763G, TK-768, TK-768G, TK-780, TK-780, TK-780G, TK-785, TK-805, TK-805D, TK-806, TK-806D, TK-809, TK-815, TK-830, TK-830, TK-840, TK-840, TK-841, TK-850,TK-852, TK-859, TK-860, TK-860, TK-860G, TK-862, TK-862, TK-862G, TK-863, TK-863G, TK-868, TK-868G, TK-880, TK-880, TK-880G, TK-885, TK-930, TK-930, TK-940, TK-941, TK-980,TK-980, TK-981, TK-981, TK-6110K, TK-6110K2, TK-7102, TK-7108, TK-7150, TK-7150, TK-7160, TK-7180, TK-8102, TK-8108, TK-8150, TK-8150, TK-8160, TK-8180, TKB-720, TKR-730,TKR-740, TKR-750, TKR-820, TKR-830, TKR-830, TKR-850, TM-261A, TM-271A, TM-461A, TM-471A
KPG-8The KPG-8 is the predecessor to the KPG-22, and requires an external power source where the KPG-22 is powered from the COM port. Anyplace you see KPG-8 you can substitute a KPG-22. The realKenwood KPG-22 cable has a 25-pin connector.
KPG-10
The kpg-10 programming cable is for the TK-230 / TK-240 / TK-330 / TK340 radios. It is obsoleteand no longer available as a new product from Kenwood. It is hard to find on the used market. Thefolks at www.rfguys.com have a replacement available for it on their page (US$60 in early June 2011).Thanks to Dan Hebron N8VPZ for the information and pointer to rfguys.com.
KPG-14 KDS-10, KCT-24S, KVT-10, VH-C1
KPG-22
TH-F6, TH-F7, TH-G71, TH-K2, TH-K4, TK-240, TK-249, TK-250, TK-253, TK-255, TK-260, TK-260G, TK-270, TK-270G, TK-272, TK-272G, TK-273, TK-278, TK-278G, TK-340, TK-349, TK-350, TK-353, TK-355, TK-360, TK-360G, TK-370, TK-370G, TK-372, TK-373, TK-373G, TK-378,TK-378G, TK-430, TK-431, TK-715TK-2100, TK-2100, TK-2101, TK-2102, TK-2107, TK-2118, TK-2160, TK-2160, TK-2201, TK-2202, TK-2206, TK-2207, TK-3100, TK-3100, TK-3101, TK-3102, TK-3107, TK-3118, TK-3160,TK-3160, TK-3201, TK-3202, TK-3206, TK-3207
KPG-36front rear
TK-180, TK-190, TK-280, TK-285, TK-290, TK-380, TK-385, TK-390, TK-480, TK-481, TK-490,TK-491, TK-981TK-2140, TK-2180, TK-3140, TK-3180
KPG-43 TK-690, TK-790, TK-890
KPG-46SeeNote 3
TK-760/TK860, TK-760G/TK-860G, TK-762/TK-862, TK-762G/TK-862G, TK-763/TK-863, TK-763G/TK863G, TK-768/TK-868, TK-768G/TK-868G, TK-780/TK-880/TK-980, TK-780G/TK-880G,TK-785/TK-885, TK-980/TK-981, TK-7150/TK-8150, TK-7160/TK-8160, TK-7180/TK-8180, TK-7189/TK-8189
Kenwood Programming Information
http://www.repeater-builder.com/kenwood/kenwood-software-and-cable-list.html[12.11.2012. 12:57:33]
above. TKR-720/TKR-820, TKR-730/TKR-830, TKR-740/TKR-830, TKR-750/TKR-850TM-271A/TM471A, TM-261A/TM-461A
The KPT-series are stand alone programmers, unless noted they do not require a computer.Programmer Radio
KPT-10 TK-601S, TK-701S, TK-801S, TK-901S, TK-702R, TK-902R
KPT-20 TK-210, TK-310, TK-220, TK-320, TK-330, TK-710, TK-810, TK-620, TK-720, TK-820, TK-622R, TK-722R, TK-822R, TK-TKB-620, TKB-720, TKR-720, TKR-820
KPT-40 TK-705, TK-805, TK-706, TK-806
KPT-50 TKR-720, TK-820, TKB-620, TKB-720Can work stand alone or can work with KPG-21D software.
Back to the top of the pageUp one levelBack to Home
This page originally posted in Deccember 2008Last revised 21-Oct-2012
Hand-coded HTML © Copyright 2008 and date of last update by repeater-builder.com.
This web page, this web site, the information presented in and on its pages and in these modifications and conversions is © Copyrighted 1995 and(date of last update) by Kevin Custer W3KKC and multiple originating authors. All Rights Reserved, including that of paper and web publicationelsewhere.